POWERPLANT
SUBWOOFERS
Installation Warning
1. Ensure the vehicle 12 volt lead is removed before any equipment is connected.
2. Investigate the vehicle’s gas tanks, brake lines and electrical wiring locations before you begin installation.
3. Attach the product securely to the vehicle to prevent damage in the event of an accident.
4. Ensure all wiring is protected to avoid damage or pinching of the cables.
PP-SW120, PP-SW150
Subwoofer Parameters
PP-SW120
PP-SW150
1500 Watts
625 Watts
20Hz - 1.5kHz
2 x 2 Ohms
91 dB
Max Power Rating
RMS Power Rating
Frequency Response
Impedance
1200 Watts
500 Watts
25Hz - 2.5kHz
2 x 2 Ohms
90 dB
Sensitivity
Compliance (Cms)
Cone Area (Sd)
207.925
490.87
3.6 (1.8 x 2)
0.475
91.005
754.77
3.6 (1.8 x 2)
0.397
D.C. Coil Resistance (Re)
Electrical Q (Qes)
Force Factor (Bl)
Free Air Resonance (Fs)
Linear Excurson (Xmax)
Mechanical Excursion (mm)
Mechanical Q (Qms)
Total Loudspeaker Q (Qts)
VAS (L)
12.471
37
21.715
33.620
30
30
9
9
3.345
2.643
0.416
0.345
71.142
2.5
73.618
2.6
VAS (CuFt)
RECORD YOUR PURCHASE DETAILS HERE:
Optimum Enclosures
MODEL NUMBER __________________________ DATE OF PURCHASE__________________________
Ported
Volume (litres)
Volume (cu.ft.)
Port diameter
Port length
PP-SW120
41
PP-SW150
60
AFFIX RECEIPT HERE
1.48
2.2
101mm/4”
348mm / 13.73”
40
101mm/4”
350mm / 13.75"
38.5
Tuned frequency (Hz)
Sealed
Volume (litres)
Volume (cu.ft.)
Tuned frequency (Hz)
27
1.0
75
45.5
1.6
80
WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may
cause permanent hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE!
V 1.0
PUBLISHED BY FUSION ELECTRONICS LIMITED:
YOU CAN HELP PROTECT THE ENVIRONMENT!
© Copyright 2006 by FUSION Electronics Limited.
Please remember to respect the local regulations:
All rights reserved. Specifications and design are
Hand in the non-working electrical equipment
subject to change without notice.
to an appropriate waste disposal center.
|