FujiFilm FinePix T200 User Manual

BL01260-201

Before You Begin

First Steps

DIGITAL CAMERA

FINEPIX

T300/T200/T190 Series

Basic Photography and Playback

More on Photography

More on Playback

Movies

Owner’s Manual

Thank you for your purchase

of this product. This manual

describes how to use your

FUJIFILM digital camera and

the supplied software. Be sure

that you have read and un-

derstood its contents and the

warnings in “For Your Safety”

(Pii) before using the camera.

Connections

Menus

Technical Notes

For information on related products, visit our website at

http://www.fujifilm.com/products/digital_cameras/index.html

Troubleshooting

Appendix

For Your Safety

If the video product does not operate

normally follow the operating instruc-

tions. Adjust only those controls that are

covered by the operating instructions as

an improper adjustment of other controls

may result in damage and will often re-

quire extensive work by a qualified tech-

nician to restore the video product to its

normal operation.

Antennas

Use

Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from

antenna or cable system is connected to the wall outlet before cleaning. Do not

the video product, be sure the antenna or use liquid cleaners or aerosol cleaners.

cable system is grounded so as to provide Use a damp cloth for cleaning.

some protection against voltage surges

and built-up static charges. Section 810

Object and Liquid Entry: Never push ob-

jects of any kind into this video product

of the National Electrical Code, ANSI/

through openings as they may touch

NFPA No. 70, provides information with

dangerous voltage points or short out

respect to proper grounding of the mast

parts that could result in a fire or electric

When the video product exhibits a dis-

tinct change in performance—this indi-

cates a need for service.

and supporting structure, grounding of

shock. Never spill liquid of any kind on

the lead-in wire to an antenna discharge

the video product.

unit, size of grounding conductors, loca-

Replacement Parts: When replacement

parts are required, be sure the service

technician has used replacement parts

specified by the manufacturer or have

the same characteristics as the original

part. Unauthorized substitutions may re-

sult in fire, electric shock or other hazards.

Lightning: For added protection for this

video product receiver during a lightning

storm, or when it is left unattended and

unused for long periods of time, unplug

it from the wall outlet and disconnect the

antenna or cable system. This will pre-

vent damage to the video product due to

lightning and power-line surges.

tion of antenna discharge unit, connec-

tion to grounding electrodes, and re-

quirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

Ground Clamp

Antenna Lead

in Wire

Safety Check: Upon completion of any ser-

vice or repairs to this video product, ask

the service technician to perform safety

checks to determine that the video prod-

uct is in proper operating condition.

Service

Antenna

Electric Service

Equipment

Servicing: Do not attempt to service this

video product yourself as opening or

removing covers may expose you to dan-

gerous voltage or other hazards. Refer all

servicing to qualified service personnel.

Discharge Unit

(NEC SECTION

810-20)

Ground Clamps

Grounding

Conductors

(NEC SECTION

810-21)

Damage Requiring Service: Unplug this vid-

eo product from the wall outlet and refer

servicing to qualified service personnel

under the following conditions:

• When the power-supply cord or plug is

damaged.

• If liquid has been spilled, or objects

have fallen into the video product.

• If the video product has been exposed

to rain or water.

Power Service Grounding

Electrode System (NEC

ART 250. PART H)

Power Lines: An outside antenna system

should not be located in the vicinity of

overhead power lines or other electric

light or power circuits, or where it can fall

into such power lines or circuits. When

installing an outside antenna system, ex-

treme care should be taken to keep from

touching such power lines or circuits as

contact with them might be fatal.

• If the video product has been dropped

or the cabinet has been damaged.

iii

For Your Safety

Be sure to read these notes before use

WARNING

Do not allow water or foreign objects to enter the camera. If water

or foreign objects get inside the camera, turn the cam-

era off, remove the battery, and disconnect and unplug

the AC power adapter. Continued use of the camera

can cause a fire or electric shock. Contact your FUJIFILM

dealer.

Safety Notes

• Make sure that you use your camera correctly. Read these

safety notes and your Owner’s Manual carefully before use.

• After reading these safety notes, store them in a safe place.

Avoid exposure

to water

About the Icons

The icons shown below are used in this document to indicate

the severity of the injury or damage that can result if the infor-

mation indicated by the icon is ignored and the product is used

incorrectly as a result.

Do not use the camera in the bathroom or shower. This can cause

a fire or electric shock.

Do not use in

the bathroom or

shower

Never attempt to change or take apart the camera (never open the

case). Failure to observe this precaution can cause fire or

electric shock.

This icon indicates that death or serious injury can result

if the information is ignored.

Do not

disassemble

WARNING

Should the case break open as the result of a fall or other accident,

do not touch the exposed parts. Failure to observe this precau-

tion could result in electric shock or in injury from touch-

ing the damaged parts. Remove the battery immediate-

ly, taking care to avoid injury or electric shock, and take

the product to the point of purchase for consultation.

This icon indicates that personal injury or material dam-

age can result if the information is ignored.

CAUTION

Do not touch

internal parts

The icons shown below are used to indicate the nature of the

instructions which are to be observed.

Do not change, heat or unduly twist or pull the connection cord and

do not place heavy objects on the connection cord. These actions

could damage the cord and cause a fire or electric shock.

If the cord is damaged, contact your FUJIFILM dealer.

Triangular icons tell you that this information requires at-

tention (“Important”).

Circular icons with a diagonal bar tell you that the action

indicated is prohibited (“Prohibited”).

Do not place the camera on an unstable surface. This can cause

Filled circles with an exclamation mark indicate an action

that must be performed (“Required”).

the camera to fall or tip over and cause injury.

Never attempt to take pictures while in motion. Do not use the

camera while you are walking or driving a vehicle. This

can result in you falling down or being involved in a traf-

fic accident.

WARNING

If a problem arises, turn the camera off, remove the battery, and

disconnect and unplug the AC power adapter. Continued use

of the camera when it is emitting smoke, is emitting any

Do not touch any metal parts of the camera during a thunderstorm.

This can cause an electric shock due to induced current

from the lightning discharge.

Unplug from

power socket

unusual odor, or is in any other abnormal state can cause

a fire or electric shock. Contact your FUJIFILM dealer.

Do not use the battery except as specified. Load the battery as

shown by the indicator.

Do not heat, change or take apart the battery. Do not drop or subject

the battery to impacts. Do not store the battery with metallic prod-

ucts. Any of these actions can cause the battery to burst

or leak and cause fire or injury as a result.

For Your Safety

WARNING

CAUTION

Use only the battery or AC power adapters specified for use with this

camera. Do not use voltages other than the power supply voltage

shown. The use of other power sources can cause a fire.

If the battery leaks and fluid gets in contact with your eyes, skin or

clothing, flush the affected area with clean water and seek medical

attention or call an emergency number right away.

Do not use the charger to charge batteries other than those speci-

fied here. The supplied battery charger is for use only with

the type of battery supplied with the camera. Using the

charger to charge conventional batteries or other types

of rechargeable batteries can cause the battery to leak

fluid, overheat or burst.

Do not use this camera in locations affected by oil fumes, steam, hu-

midity or dust. This can cause a fire or electric shock.

Do not leave this camera in places subject to extremely high tem-

peratures. Do not leave the camera in locations such as a

sealed vehicle or in direct sunlight. This can cause a fire.

Keep out of the reach of small children. This product could

cause injury in the hands of a child.

Do not place heavy objects on the camera. This can cause the

heavy object to tip over or fall and cause injury.

Do not move the camera while the AC power adapter is still connect-

ed. Do not pull on the connection cord to disconnect the AC power

adapter. This can damage the power cord or cables and

cause a fire or electric shock.

When carrying the battery, install it in a digital camera or keep it

in the hard case. When storing the battery, keep it in the hard case.

When discarding, cover the battery terminals with insulation tape.

Contact with other metallic objects or batteries could

cause the battery to ignite or burst.

Do not use the AC power adapter when the plug is damaged or

the plug socket connection is loose. This could cause a fire or

electric shock.

Keep memory cards out of the reach of small children. Because

memory cards are small, they can be swallowed by chil-

dren. Be sure to store memory cards out of the reach of

small children. If a child swallows a memory card, seek

medical attention or call an emergency number.

Do not cover or wrap the camera or the AC power adapter in a cloth

or blanket. This can cause heat to build up and distort the

casing or cause a fire.

When you are cleaning the camera or you do not plan to use the cam-

era for an extended period, remove the battery and disconnect and

unplug the AC power adapter. Failure to do so can cause a fire

or electric shock.

When charging ends, unplug the charger from the power socket.

Leaving the charger plugged into the power socket can

cause a fire.

Unplug from

power socket

Using a flash too close to a person’s eyes may temporarily affect the

eyesight. Take particular care when photographing infants

and young children.

When a memory card is removed, the card could come out of the slot

too quickly. Use your finger to hold it and gently release the card.

Injury could result to those struck by the ejected card.

Request regular internal testing and cleaning for your camera.

Build-up of dust in your camera can cause a fire or electric

shock. Contact your FUJIFILM dealer to request internal

cleaning every two years. Please note that this service is

not free of charge.

For Your Safety

■ Charging the Battery

■ Cautions: Handling the Battery

The Battery and Power Supply

Charge the battery in the supplied bat- • Do not transport or store with metal

tery charger. Charging times will increase

Note: Check the type of battery used in

your camera and read the appropriate

sections.

objects such as necklaces or hairpins.

at ambient temperatures below +10°C • Do not expose to flame or heat.

(+50°F) or above +35°C (+95°F). Do not • Do not disassemble or modify.

attempt to charge the battery at tem- • Use with designated chargers only.

peratures above 40°C (+104°F); at tem- • Do not drop or subject to strong physi-

peratures below 0°C (+32°F), the battery

will not charge.

The following describes the proper use

of batteries and how to prolong their

life. Incorrect use can shorten battery

life or cause leakage, overheating, fire, or

explosion.

cal shocks.

• Do not expose to water.

• Keep the terminals clean.

• The battery and camera body may be-

come warm to the touch after extended

use. This is normal.

Do not attempt to recharge a fully charged

battery. The battery does not however

need to be fully discharged before charg-

ing.

Li-ion Batteries

Read this section if your camera uses a

rechargeable Li-ion battery.

AA Alkalline/Rechargeable Ni-MH Batteries

Read this section if your camera uses AA

alkaline or rechargeable AA Ni-MH bat-

teries. Information on compatible bat-

tery types may be found elsewhere in the

camera manual.

The battery is not charged at shipment.

Charge the battery before use. Keep the

battery in its case when not in use.

The battery may be warm to the touch

immediately after charging or use. This

is normal.

■ Notes on the Battery

■ Battery Life

The battery gradually loses its charge

when not in use. Charge the battery one

or two days before use.

At normal temperatures, the battery can

be recharged about 300 times. A notice-

able decrease in the length of time the

battery will hold a charge indicates that it

has reached the end of its service life and

should be replaced.

■ Cautions: Handling the Batteries

• Do not expose to water, flame, or heat,

or store in warm or humid conditions.

• Do not transport or store with metal

objects such as necklaces or hairpins.

• Do not disassemble or modify the bat-

teries or battery casing.

• Do not subject to strong physical

shocks.

• Do not use batteries that are leaking,

deformed, or discolored.

Battery life can be extended by turning

the camera off when not in use.

Battery capacity decreases at low tem-

■ Storage

depleted battery may not

peratures;

Performance may be impaired if the bat-

tery is left unused for extended periods

when fully charged. Run the battery flat

before storing it.

function at when cold. Keep

fully

charged spare battery in a warm place

and exchange as necessary, or keep the

battery in your pocket or other warm

place and insert it in the camera only

when shooting. Do not place the battery

in direct contact with hand warmers or

other heating devices.

If the camera will not be used for an ex-

tended period, remove the battery and

store it in a dry place with an ambient

temperature of from +15°C to +25°C

(+59°F to +77°F). Do not store in loca-

tions exposed to extremes of tempera-

ture.

• Keep out of reach of infants and small

children.

• Insert in the correct orientation.

For Your Safety

• Do not mix old and new batteries, bat- ■ Ni-MH Batteries

teries with different charge levels, or The capacity of Ni-MH batteries may be Dispose of used batteries in accord with

batteries of different types. temporarily reduced when new, after local regulations.

■ Disposal

• If the camera will not be used for an long periods of disuse, or if they are re-

extended period, remove the batteries. peatedly recharged before being fully

Note that the camera clock will be reset. discharged. This is normal and does not

• The batteries may be warm to the touch indicate a malfunction. Capacity can be

immediately after use. Turn the camera increased by repeatedly discharging the

off and allow the batteries to cool be- batteries using the discharge option in

AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)

This section applies to all camera models.

Use only FUJIFILM AC power adapters

designated for use with this camera. Oth-

er adapters could damage the camera.

• The AC power adapter is for indoor use

the camera setup menu and recharg-

only.

fore handling.

• Battery capacity tends to decrease at ing them using a battery charger (sold

low temperatures. Keep spare batter- separately).

ies in a pocket or other warm place and

• Be sure the DC plug is securely con-

nected to the camera.

• Turn the camera off before disconnect-

ing the adapter. Disconnect the adapter

by the plug, not the cable.

• Do not use with other devices.

• Do not disassemble.

• Do not expose to high heat and hu-

midity.

• Do not subject to strong physical

shocks.

• The adapter may hum or become hot

to the touch during use. This is normal.

• If the adapter causes radio interfer-

ence, reorient or relocate the receiving

antenna.

CAUTION: Do not use the discharge op-

tion with alkaline batteries.

exchange as necessary. Cold batteries

may recover some of their charge when

warmed.

• Fingerprints and other stains on the

battery terminals can impair battery

performance. Thoroughly clean the

terminals with a soft, dry cloth before

inserting them in the camera.

The camera draws

small amount of

current even when off. Ni-MH batteries

that have been left in the camera for an

extended period may be drawn down

to the point that they no longer hold a

charge. Battery performance may also

drop if the batteries are run down in

If the batteries leak, clean the bat-

tery compartment thoroughly be-

fore inserting new batteries.

device such as

flashlight. Use the

discharge option in the camera setup

menu to discharge Ni-MH batteries. Bat-

teries that no longer hold a charge even

after repeatedly being discharged and

recharged have reached the end of their

service life and must be replaced.

If fluid from the battery comes

into contact with skin or clothing,

flush the affected area with water.

If fluid enters your eyes, immediately

flush the affected area with water and

seek medical attention. Do not rub your

eyes. Failure to observe this precaution

could result in permanent visual impair-

ment.

Ni-MH batteries can be recharged in a

battery charger (sold separately). Bat-

teries may become warm to the touch

after charging. Refer to the instructions

provided with the charger for more infor-

mation. Use the charger with compatible

batteries only.

Ni-MH batteries gradually lose their

charge when not in use.

vii

For Your Safety

is a trademark. YouTube is a trademark of

Google Inc. All other trade names men-

tioned in this manual are the trademarks

or registered trademarks of their respec-

tive owners.

Liquid CCrystal

Using the Camera

In the event that the LCD monitor is dam-

aged, care should be taken to avoid con-

tact with liquid crystal. Take the urgent

action indicated should any of the follow-

ing situations arise:

Do not aim the camera at extremely

bright light sources, such as the sun in

a cloudless sky. Failure to observe this

precaution could damage the camera

image sensor.

Electtricall Inteerrference

•

If liquid crystal comes in contact with your

skin, clean the area with

then wash thoroughly with soap and

running water.

If liquid crystal enters your eyes, flush the af-

fected eye with clean water for at least

15 minutes and then seek medical as-

sistance.

If liquid crystal is swallowed, rinse your

mouth thoroughly with water. Drink

large quantities of water and induce

vomiting, then seek medical assistance.

This camera may interfere with hospital

or aviation equipment. Consult with hos-

pital or airline staff before using the cam-

era in a hospital or on an aircraft.

Take Test Shots

cloth and

Before taking photographs on important

occasions (such as at weddings or before

taking the camera on a trip), take a test

shot and view the result in the LCD moni-

tor to ensure that the camera is function-

ing normally. FUJIFILM Corporation can

not accept liability for damages or lost

Color Television Systems

NTSC (National Television System Com-

mittee) is a color television telecasting

specification adopted mainly in the

U.S.A., Canada, and Japan. PAL (Phases

Alternation by Line) is a color television

system adopted mainly in European

countries and China.

profits incurred as

malfunction.

result of product

Notes on Copyright

Unless intended solely for personal

use, images recorded using your digital

camera system cannot be used in ways

that infringe copyright laws without the

consent of the owner. Note that some

restrictions apply to the photographing

of stage performances, entertainments,

and exhibits, even when intended purely

for personal use. Users are also asked to

note that the transfer of memory cards

containing images or data protected

under copyright laws is only permissible

within the restrictions imposed by those

Although the display is manufactured us-

ing extremely high-precision technology,

it may contain pixels that are always lit or

that do not light. This is not a malfunc-

tion, and images recorded with the prod-

uct are unaffected.

Exif Print (Exif Version 2.3)

Exif Print is a newly revised digital camera

file format in which information stored

with photographs is used for optimal

color reproduction during printing.

Trademarkk Information

IMPORTANT NOTICE:

Read Before Using the Software

Direct or indirect export, in whole or in

part, of licensed software without the

permission of the applicable governing

bodies is prohibited.

xD-Picture Card and E are trademarks

of FUJIFILM Corporation. The typefaces

included herein are solely developed by

DynaComware Taiwan Inc. Macintosh,

QuickTime, and Mac OS are trademarks of

Apple Inc. in the U.S.A. and other coun-

tries. Windows 7, Windows Vista, and the

Windows logo are trademarks of the Mi-

crosoft group of companies. Adobe and

Adobe Reader are either trademarks or

registered trademarks of Adobe Systems

Incorporated in the U.S.A. and/or other

countries. The SDHC and SDXC logos are

trademarks of SD-3C, LLC. The HDMI logo

Haandling

To ensure that images are recorded cor-

rectly, do not subject the camera to im-

pact or physical shocks while images are

being recorded.

viii

About This Manual

Before using the camera, read this manual and the warnings in“For Your Safe-

ty”(Pii). For information on specific topics, consult the sources below.

Table of Contents .............................Pxi Troubleshooting ............................ P83

The “Table of Contents” gives an Having a specific problem with the

overview of the entire manual. The camera? Find the answer here.

principal camera operations are

listed here.

Warning MMessaggeess aanndd Displays ..... P88

Find out what’s behind that flashing

icon or error message in the display.

Memoryy Caarrds

Pictures can be stored on optional SD and SDHC memory cards (P10). In this man-

ual, SD/SDHC memory cards are referred to as“memory cards.”

Frequeently--Usseedd BBuuttttons

■ Turning the Caamera onn iin Playbaack Mode

y When the camera is

off, playback can be

■ Takiinngg PPictureess DDuurriinngg Playback

y To return instantly to shooting mode,

press the shutter button halfway.

started by pressing the

abutton for about a

second.

Shoot

View

■ Silent Mode

■ Deletingg Pictures

y Press the selector up (b)

to display deletion op-

tions.

y Press and hold the DISP/

BACK button to disable

camera lights and

sounds.

Table of Contents

For Your Safety ..................................................................ii

IMPORTANT SAFETY INSTRUCTIONS ..................................ii

Safety Notes ..................................................................iv

About This Manual ...........................................................ix

Frequently-Used Buttons .................................................x

Moree oonn PPhotography

Shooting Mode................................................................20

SP SCENE POSITION.......................................................21

r PANORAMA..........................................................22

Focus Lock........................................................................25

dExposure Compensation..........................................27

FMacro Mode (Close-ups) ...........................................28

NUsing the Flash (Intelligent Flash) ............................29

hUsing the Self-Timer .................................................31

bIntelligent Face Detection.......................................32

nFace Recognition......................................................33

Adding New Faces..........................................................33

Viewing, Editing, and Deleting Existing Data .................35

Adding Faces Automatically ...........................................35

Beforre You Begin

Symbols and Conventions.................................................1

Supplied Accessories.........................................................1

Parts of the Camera ..........................................................2

Camera Displays...............................................................4

Shooting ........................................................................4

Playback.........................................................................5

First Steps

Charging the Battery ........................................................6

Inserting the Battery and a Memory Card.......................8

Compatible Memory Cards .............................................10

Turning the Camera on and Off......................................13

Shooting Mode ..............................................................13

Playback Mode...............................................................13

Basic Setup ......................................................................15

Moree oon Playback

Playback Options.............................................................37

IFavorites: Rating Pictures .........................................37

Playback Zoom...............................................................38

Multi-Frame Playback....................................................39

Deleting Pictures......................................................40

Image Search............................................................41

PhotoBook Assist .....................................................42

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode......16

Viewing Pictures .............................................................19

Creating a PhotoBook.....................................................42

Viewing Photobooks ......................................................43

Editing and Deleting Photobooks...................................43

Viewing Panoramas ........................................................44

Table of Contents

Movies

Menus

Recording Movies............................................................45

Using the Menus: Shooting Mode..................................60

Using the Shooting Menu...............................................60

Shooting Menu Options .................................................60

ASCENE POSITION .....................................................60

NISO........................................................................60

OIMAGE SIZE............................................................61

TIMAGE QUALITY .....................................................62

PFINEPIX COLOR .......................................................62

DWHITE BALANCE ....................................................63

RCONTINUOUS .........................................................63

bFACE DETECTION ....................................................64

FAF MODE...............................................................64

nFACE RECOGNITION .................................................64

PMODE....................................................................64

OQUALITY................................................................64

Viewing Movies ...............................................................47

Coonnnneections

Viewing Pictures on TV ...................................................48

Printing Pictures via USB................................................49

Printing the DPOF Print Order.........................................51

Viewing Pictures on a Computer....................................53

Windows: Installing MyFinePix Studio ...........................53

Macintosh: Installing FinePixViewer...............................55

Connecting the Camera..................................................57

xii

Table of Contents

Using the Menus: Playback Mode ..................................65

Using the Playback Menu...............................................65

Playback Menu Options..................................................65

kPHOTOBOOK ASSIST................................................65

bIMAGE SEARCH ......................................................65

AERASE ...................................................................65

jMARK FOR UPLOAD TO............................................66

ISLIDE SHOW ..........................................................67

BRED EYE REMOVAL .................................................67

DPROTECT................................................................68

GCROP.....................................................................68

ORESIZE...................................................................69

CIMAGE ROTATE .......................................................69

nERASE FACE RECOG. ................................................70

KPRINT ORDER (DPOF) ..............................................70

The Setup Menu ..............................................................71

Using the Setup Menu....................................................71

Setup Menu Options ......................................................72

FDATE/TIME ............................................................72

NTIME DIFFERENCE ...................................................72

La......................................................72

oSILENT MODE.........................................................72

RRESET....................................................................73

KFORMAT ................................................................73

AIMAGE DISP. ...........................................................73

BFRAME NO. ............................................................74

GOPERATION VOL......................................................74

HSHUTTER VOLUME ..................................................74

eSHUTTER SOUND....................................................75

IPLAYBACK VOLUME ................................................75

JLCD BRIGHTNESS ....................................................75

ELCD MODE .............................................................75

MAUTO POWER OFF...................................................75

LDUAL IS MODE .......................................................75

BRED EYE REMOVAL .................................................76

mBLINK DETECTION...................................................76

DDIGITAL ZOOM .......................................................77

pMOVIE ZOOM TYPE .................................................77

nSAVE ORG IMAGE....................................................78

OBACKGROUND COLOR..............................................78

cGUIDANCE DISPLAY ................................................78

QVIDEO SYSTEM .......................................................78

xiii

Table of Contents

Techniccaall NNotes

Troubleshooting

Optional Accessories .......................................................79

Printing........................................................................79

Computer Related..........................................................79

Audio/Visual.................................................................79

Accessories from FUJIFILM..............................................80

Caring for the Camera.....................................................81

Storage and Use .............................................................81

Water and Sand.............................................................81

Condensation................................................................81

Cleaning.........................................................................82

Traveling ........................................................................82

Problems and Solutions..................................................83

Warning Messages and Displays ....................................88

Appendix

Tips and Tricks..................................................................92

Memory Card Capacity....................................................95

Specifications ..................................................................96

xiv

Before You Begin

Symbols andd Convventions

The following symbols are used in this manual:

Q : This information should be read before use to ensure correct operation.

R : Additional information that may be helpful when using the camera.

P: Other pages in this manual on which related information may be found.

Menus and other text in the LCD monitor are shown in bold. In the illustra-

tions in this manual, displays may be simplified for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

Plug adapter^*

NP-45A recharge-

able battery

BC-45C battery

charger

USB cable

CD-ROM

(contains this

manual)

• Strap

• User Guide

Attttaacchhiing the Strap

Attach the strap as

shown.

* Shape of adapter varies with region of sale.

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Selector button

Move cursor up

d(exposure compensation) button (P27)

b(delete) button (Px)

MENU/OK button

Move cursor left

F(macro) button (P28)

Move cursor right

N(flash) button (P29)

Move cursor down

h(self-timer) button (P31)

Before You Begin

Parts of the Camera

1 Shutter button.............................................................. 18 11 Mode dial...................................................................... 20

2 ON/OFF button ............................................................. 13 12 a(playback) button .................................................. 19

3 Self-timer lamp ............................................................ 31 13 Indicator lamp (see below)

4 Flash............................................................................. 29 14 Strap eyelet .................................................................... 1

5 Microphone .................................................................. 45 15 Battery-chamber cover................................................... 8

6 Speaker......................................................................... 47 16 USB multi-connector .........................................48, 49, 57

7 Lens and lens cover

17 Tripod mount

8 Zoom control ...........................................................17, 38 18 Memory card slot............................................................ 9

9 LCD monitor.................................................................... 4 19 Battery chamber............................................................. 8

10 DISP (display)/BACK button .....................................5, 15 20 Battery latch..............................................................8, 10

o (silent mode) button^*................................................x

*Press and hold the DISP/BACK button until o is displayed.

Thhee IInndicator Lamp

The indicator lamp shows camera status as follows:

Indicator lamp

Glowwss ggrreen

Blinks green

Caammera sstatus

Focus locked.

Blur, focus, or exposure warning. Picture can be taken.

Blinks green and orange Recording pictures. Additional pictures can be taken.

Glowwss oorraannggee

Blinks orange

Blinks red

Recording pictures. No additional pictures can be taken at this time.

Flash charging; flash will not fire when picture is taken.

Lens or memory error.

Before You Begin

Parts of the Camera

Camera Displays

The following types of indicator may be displayed during shooting and play-

back. Indicators vary with camera settings.

■ Shooting

6 Focus warning .........................................................18, 88

7 Number of available frames.......................................... 95

800

8 Sensitivity..................................................................... 60

9 Image size/Image quality ........................................61, 62

10 FINEPIX color ................................................................ 62

11 White balance............................................................... 63

12 Battery level ................................................................... 5

13 Dual IS mode ................................................................ 75

14 Exposure compensation................................................ 27

15 Shutter speed /Aperture

12/31/2050

250

10:00 AM

1²

F4.5

16 Date and time............................................................... 15

17 Blur warning............................................................30, 88

18 Self-timer indicator ...................................................... 31

19 Macro (close-up) mode................................................. 28

20 Flash mode ................................................................... 29

1 Shooting mode............................................................. 20

2 Intelligent Face Detection indicator .............................. 32

3 Continuous shooting mode........................................... 63

4 Silent mode indicator ................................................3, 72

5 Focus frame .................................................................. 25

Before You Begin

Parts of the Camera

■ Playback

1 Playback mode indicator..........................................19, 37

2 Intelligent Face Detection indicator .........................32, 64

3 Red-eye removal indicator............................................ 67

4 Silent mode indicator ................................................3, 72

5 Gift image..................................................................... 37

6 Frame number.............................................................. 74

7 Mark for upload to........................................................ 66

8 Photobook assist........................................................... 42

9 Favorites ....................................................................... 37

10 DPOF print indicator ..................................................... 51

11 Protected image ........................................................... 68

100-0001

400

4:3

YouTube

12/31/2050

1/250 4.5

10:00 AM

1²

Batterryy LLevel

Battery level is shown as follows:

Indicator

Description

D(white)

C(white)

B(red)

Battery partially discharged.

Battery more than half discharged.

Low battery. Charge as soon as possible.

A(blinks red) Battery exhausted. Turn camera off and charge battery.

Hiding and Viewing Indicators

Press DISP/BACK to cycle through shooting and playback indicators as follows:

• Shooting: Indicators displayed/indicators hidden/best framing

• Playback: Indicators displayed/indicators hidden/Ifavorites

Before You Begin

First Steps

Chhaarrggiinngg the Batteerryy

The battery is not charged at shipment. Charge the battery before use.

Attach the plug adapter.

Attach the plug adapter as shown at right,

making sure that it is fully inserted and clicks

into place on the charger terminals.

Q The plug adapter is exclusively for use with the

supplied battery charger. Do not use it with

other devices.

Battery charger

Plug adapter

Place the battery in the supplied battery charger.

Battery

Insert the battery in the orien-

Arrow

tation indicated by the CFD

Charge lamp

labels.

The camera uses an NP-45A re-

chargeable battery.

CFD label

Charging the Battery

Plug the charger in.

Plug the charger into an indoor power outlet. The charging indicator will

light.

Thhee CCharggiinngg IInnddicator

The charging indicator shows battery charge status as follows:

Charging indicator

Off

On (green)

On (orange)

Blinkss (orange)

Battery status

Battery not inserted.

Battery fully charged.

Battery charging.

Battery fault.

Action

Insert the battery.

Reemmoove the battery.

—

Unplug thhe chargeer and remmove the battery.

Charge the battery.

Remove the battery when charging is complete.

Q Unplug the charger when it is not in use.

First Steps

Innsseertinng the Baatttterryy aanndd aa MMemory Cardd

After charging the battery, insert the battery and memory card as described

below.

Open the battery-chamber cover.

R Be sure the camera is off before opening the

battery-chamber cover.

②

①

Q Do not open the battery-chamber cover

when the camera is on. Failure to observe

this precaution could result in damage to

image files or memory cards.

Q Do not use excessive force when handling the battery-chamber cover.

Insert the battery.

Align the orange stripe on the battery with

Orange stripe

the orange battery latch and slide the bat-

tery into the camera, keeping the battery

latch pressed to one side. Confirm that the

battery is securely latched.

Battery latch

Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert

the battery upside down or backwards. The battery will slide in easily in the cor-

rect orientation.

First Steps

Inserting the Battery and a Memory Card

Insert the memory card.

Holding the memory card in the

orientation shown at right, slide it in

until it clicks into place at the back

of the slot.

Q Be sure card is in the correct orienta-

tion; do not insert at an angle or use

force.

Battery

Click

Q SD/SDHC memory cards can be locked, making it

impossible to format the card or to record or delete

images. Before inserting an SD/SDHC memory card,

slide the write-protect switch to the unlocked posi-

tion.

Write-protect switch

Close the battery-chamber cover.

①

②

First Steps

Inserting the Battery and a Memory Card

Reemoving the Battery annd Memorry Caarrdd

Before removing the battery or memory card, turn the camera off and open the

battery-chamber cover.

Battery latch

To remove the battery, press the battery latch to the side, and

slide the battery out of the camera as shown.

To remove the memory card, press it in and release it slowly.

The card can then be removed by hand. When a memory card

is removed, the card could come out of the slot too quickly. Use

your finger to hold it and gently release the card.

■ Compatible Memory Cards

FUJIFILM and SanDisk SD and SDHC memory cards have been approved for

use in the camera. A complete list of approved memory cards is available at

http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is

not guaranteed with other cards. The camera can not be used with xD-Picture

Cards or MultiMediaCard (MMC) devices.

First Steps

Inserting the Battery and a Memory Card

Q Memory Caarrds

• Do not turn the camera off or remove the memory card while the memory card is

being formatted or data are being recorded to or deleted from the card. Failure to

observe this precaution could damage the card.

• Format SD/SDHC memory cards before first use, and be sure to reformat all memory

cards after using them in a computer or other device. For more information on for-

matting memory cards, see“KFORMAT” (P73).

• Memory cards are small and can be swallowed; keep out of reach of children. If a

child swallows a memory card, seek medical assistance immediately.

• miniSD or microSD adapters that are larger or smaller than the standard dimensions

of an SD/SDHC memory card may not eject normally; if the card does not eject, take

the camera to an authorized service representative. Do not forcibly remove the card.

• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.

• Movie recording may be interrupted with some types of SD/SDHC memory card. Use

a G card or better when shooting HD movies.

• Formatting a memory card in the camera creates a folder in which pictures are

stored. Do not rename or delete this folder or use a computer or other device to

edit, delete, or rename image files. Always use the camera to delete pictures; before

editing or renaming files, copy them to a computer and edit or rename the copies,

not the originals.

First Steps

Inserting the Battery and a Memory Card

Q Batteries

• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this

precaution could prevent the battery from charging.

• Do not affix stickers or other objects to the battery. Failure to observe this precaution

could make it impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery could overheat.

• Read the cautions in“The Battery and Power Supply”(Pvi).

• Use only battery chargers designated for use with the battery. Failure to observe this

precaution could result in product malfunction.

• Do not remove the labels from the battery or attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in use. Charge the battery one or

two days before use.

First Steps

Turning the Camera on and Off

Shooting Mode

Playback Mode

Press the ON/OFF button to turn the To turn the camera on and begin

camera on. The lens will extend and playback, press the a button for

the lens cover will open.

about a second.

Press the a button again or press

the ON/OFF button to turn the camera

off.

Press ON/OFF again to turn the camera

off.

R Switching to Playback Mode

R Switching to Shooting Mode

Press the a button to start playback.

Press the shutter button halfway to return

to shooting mode.

To exit to shooting mode, press the shut-

ter button halfway. Press the a button

to return to playback.

First Steps

Turning the Camera on and Off

Q Forcibly obstructing the lens could cause damage or product malfunction.

Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.

Q The ON/OFF button does not completely end the supply of power to the camera.

R Auto Power Off

The camera will turn off automatically if no operations are performed for the length of

time selected for MAUTO POWER OFF (P75).

First Steps

Baassic SSetup

A language-selection dialog is displayed the first time the camera is turned

on. Set up the camera as described below (you can reset the clock or change

languages at any time using the FDATE/TIME or La options in

the setup menu; for information on displaying the setup menu, see page 71).

START MENU

Highlight a language and press MENU/OK.

ENGLISH

R Press DISP/BACK to skip the current step. Any steps you skip

FRANCAIS

DEUTSCH

will be displayed the next time the camera is turned on.

SET

DATE/TIME NOT SET

The date and time will be displayed. Press the selector

left or right to highlight the year, month, day, hour, or

minute and press up or down to change. To change the

order in which the year, month, and day are displayed,

highlight the date format and press the selector up or

down. Press MENU/OK when settings are complete.

2013

2012

YY. MM. DD 2011

12:00

2010

2009

SET

R Thhee CCamera Clock

If the battery is removed for an extended period, the camera clock will be reset and the

language-selection dialog will be displayed when the camera is turned on.

First Steps

Basic Photography and Playback

Taking Pictures in Q (Scene Recoognitionn)) MMode

This section describes how to take pictures in Q (scene recognition) mode.

The camera automatically analyzes the composition and adjusts settings ap-

propriately.

Select Q mode.

Turn the camera on and rotate the mode

dial to Q. The Q display will appear in

the LCD monitor.

The gIccoon

This icon indicates that the camera continuously searches for faces to select the

appropriate scene, increasing the drain on the battery.

Thhe Scene Iccoon

The camera selects the scene according to shooting conditions and the type of

subject: bPORTRAIT (portraits), cLANDSCAPE (landscapes), dNIGHT (poorly-lit land-

scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT

(backlit portraits), aAUTO (all other scenes)

Taking Pictures in Q (Scene Recognition) Mode

Frame the picture.

Use the zoom control to frame the picture in the display.

Zoom indicator

Zoom out

Zoom in

Hoollddiinngg tthhee CCamera

Hold the camera steady with both hands and brace your

elbows against your sides. Shaking or unsteady hands can

blur your shots.

To prevent pictures that are out of focus or too dark (under-

exposed), keep your fingers and other objects away from

the lens and flash.

Basic Photography and Playback

Taking Pictures in Q (Scene Recognition) Mode

Focus.

Press the shutter button halfway to focus.

Double

beep

R The lens may make a noise when the camera focuses; this

is normal.

If the camera is able to focus, it will beep twice and the indicator lamp will

glow green.

If the camera is unable to focus, the focus frame will turn red, swill be dis-

played, and the indicator lamp will blink green. Change the composition

or use focus lock (P25).

Shoot.

Smoothly press the shutter button the rest of the way

down to take the picture.

Click

R If the subject is poorly lit, the flash may fire when the pic-

ture is taken. For information on using the flash when

lighting is poor, see “N Using the Flash (Intelligent Flash)”

(P29).

Thhee SShhuuttter Button

The shutter button has two positions. Pressing the shutter button halfway sets

focus and exposure; to shoot, press the shutter button the rest of the way down.

Basic Photography and Playback

Viewing Pictures

Pictures can be viewed in the LCD monitor. When taking important photo-

graphs, take a test shot and check the results.

Press the abutton.

The most recent picture will be displayed.

View additional pictures.

Press the selector right to view pictures in

the order recorded, left to view pictures in

reverse order.

Press the shutter button to exit to shooting

mode.

Basic Photography and Playback

More on Photography

Shhooottiinngg MMode

Choose a shooting mode according to the scene or type

of subject. To select a shooting mode, align the mode

icon with the mark next to the mode dial.

P (PROGRAM AE): Select for full control over camera settings,

including exposure, white balance, and focus mode.

F (MOVIE): Shoot movies with

sound (P45).

M (SCENE RECOGNITION AUTO):

The camera analyzes the compo-

sition and selects a scene appro-

priate to the subject and shoot-

ing conditions (P16).

SP1/SP2

(SCENE

POSITIONS):

Choose a scene suited to the

subject or shooting conditions

and let the camera do the rest

(P21).

B (AUTO): A simple “point-and-

shoot” mode recommended for

first-time users of digital cameras.

(NATURAL LIGHT): Capture

natural lighting under low light

conditions.

C(NATURAL & N): The camera takes two shots: one with-

out the flash and one with.

Shooting Mode

SP SCENE POSITION

The camera offers a choice of “scenes,” each adapted to particular

shooting conditions or a specific type of subject. Use the ASCENE

POSITION option in the shooting menu to choose the scene as-

signed to the SP1 and SP2 positions on the mode dial.

Scene

L PORTRAIT

D BABY MODE

Description

Choose for portraits.

Choose for natural skin tones when taking portraits of infants.

The shutter is released automatically when Intelligent Face Detection

detects a smiling face.

K SMILE&SHOOT

M LANDSCAPE

r PANORAMA

N SPORT

Choose for daylight shots of buildings and landscapes.

Take up to three pictures and join them together to form a panorama.

Choose when photographing moving subjects.

O NIGHT

H NIGHT (TRIPOD)

Choose this mode for poorly lit twilight or night scenes.

Choose this mode for slow shutter speeds when shooting at night.

Slow shutter speeds are used to capture the expanding burst of light

from a firework.

Choose this mode to record the vivid colors in sunrises and sunsets.

Choose for crisp, clear shots that capture the brightness of scenes domi-

nated by shining white snow.

P FIREWORKS

Q SUNSET

R SNOW

S BEACH

U PARTY

V FLOWER

W TEXT

Choose for crisp, clear shots that capture the brightness of sunlit beaches.

Capture indoor background lighting under low-light conditions.

Choose for vivid close-ups of flowers.

Take clear pictures of text or drawings in print.

More on Photography

Shooting Mode

■ r PANORAMA

In this mode, you can take up to three pictures and join them together to form

a panorama. Use of a tripod is recommended to assist in composing overlap-

ping shots. The camera zooms all the way out and zoom remains fixed at the

widest angle until shooting is complete.

Select rPANORAMA for SP1 or SP2 (P21).

Select CAUTO for PMODE in the shooting menu (P60).

Press the selector up to select a frame. Press the selector left or right to

highlight a pan direction and press MENU/OK.

Take a photograph. Exposure and white balance for the panorama are set

with the first shot.

Frame the next shot to overlap with the previous picture by superimpos-

ing y on + so that they form a solid circle (z). The camera will release the

shutter automatically.

Pan direction

END

CANCEL

END

CANCEL

Display after 1st shot

Shutter released

More on Photography

Shooting Mode

Take the last shot as described in Step 5.

R To end shooting and create a panorama after the first or second shot, press the

multi selector up after completing Step 4 or Step 5 and proceed to Step 7.

Press MENU/OK to save the picture.

Q Panoramas are created from multiple frames. The camera may in some cases be

unable to stitch the frames together perfectly.

Q The desired results may not be achieved with moving subjects, subjects close to

the camera, unvarying subjects such as the sky or a field of grass, subjects that are

in constant motion, such as waves and waterfalls, or subjects that undergo marked

changes in brightness. Panoramas may be blurred if the subject is poorly lit.

For Besst Results

For best results, be careful not to tilt the camera backward or forward or to either

side and try not to move the camera while y and + are aligned to form a solid circle.

Printting PPanoramas

Depending on the page size and the size of the panorama, panoramas may print

with their edges cropped out or with wide margins at the top and bottom or at

both sides.

More on Photography

Shooting Mode

Framing Panoorraammaass MManually

Follow the steps below if the desired results are not achieved with CAUTO se-

lected for PMODE:

Select DMANUAL for PMODE in the shooting menu.

Select a frame and take the first shot.

Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take

the next shot, framing it to overlap with the previous picture.

Guide

Display after 1st shot

Frame next shot

Repeat Step 3 to take the third shot and then press MENU/OK to display the completed pan-

orama.

Press MENU/OK to save the picture.

More on Photography

Focus Lock

To compose photographs with off-center subjects:

Focus: Position the subject in the focus frame (

)

and press the shutter button halfway to lock focus

and exposure. Focus and exposure will remain locked

while the shutter button is pressed halfway (AF/AE

lock).

Recompose: Keep the button pressed halfway.

Shoot: Press the button all the way down.

More on Photography

Focus Lock

Autoffocus

Although the camera boasts a high-precision autofocus system, it may be unable to

focus on the subjects listed below. If the camera is unable to focus, focus on another

subject at the same distance and use focus lock to recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Subjects that show little contrast with the background

• Fast-moving subjects.

(for example, subjects in clothing that is the same color

• Subjects photographed through a window or other re- as the background).

flective object.

• Subjects positioned in front of or behind a high-contrast

• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a

light, such as hair or fur.

• Insubstantial subjects, such as smoke or flame.

subject photographed against a backdrop of highly con-

trasting elements).

More on Photography

Exposuure Compeensaation

To adjust exposure compensation when photo-

graphing very bright, very dark, or high-contrast

subjects, press the selector up (d). Press the selec-

tor up or down to choose an exposure compensa-

tion value and then press MENU/OK.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

R A dicon and exposure indicator are displayed at settings other than 0. Exposure

compensation is not reset when the camera is turned off; to restore normal expo-

sure control, choose a value of 0.

R Turn the flash off when using exposure compensation.

R Exposure compensation is available only in mode P.

More on Photography

Maacro MMooddee ((CClloossee--uups)

For close-ups, press the selector left (F) and select

F. When macro mode is in effect, the camera fo-

cuses on subjects near the center of the frame. Use

the zoom buttons to compose pictures (P17).

To exit macro mode, press the selector left (F) and select

OFF

R Use of a tripod is recommended to prevent blur caused by camera shake.

R The shadow cast by the lens may appear in photographs taken with the flash at

very short ranges. Zoom out or increase the distance to the subject.

More on Photography

Using the Flash (Intellligenntt Flashh)

When the flash is used, the camera’s Intelligent Flash system instantly analyzes

the scene based on such factors as the brightness of the subject, its position

in the frame, and its distance from the camera. Flash output and sensitivity

are adjusted to ensure that the main subject is correctly exposed while pre-

serving the effects of ambient background lighting, even in dimly-lit indoor

scenes. Use the flash when lighting is poor, for example when shooting at

night or indoors under low light.

Press the selector right (N) and choose from the fol-

lowing flash modes:

AUTO FLASH

According to

shooting conditions

Option

Description

AUTO/K

(AUTO FLASH)

The flash fires when required. Recommended in most situations.

N/L

The flash fires whenever a picture is taken. Use for backlit subjects or for natural

(FORCED FLASH) coloration when shooting in bright light.

The flash does not fire even when the subject is poorly lit. Use of a tripod is

(SUPPRESSED FLASH) recommended.

O/M

Capture both the main subject and the background under low light (note that

(SLOW SYNCHRO) brightly lit scenes may be overexposed).

More on Photography

NUsing the Flash (Intelligent Flash)

R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.

At slow shutter speeds, kwill appear in the display to warn that pictures may be

blurred; use of a tripod is recommended.

R The flash may fire several times with each shot. Do not move the camera until

shooting is complete.

R The flash may cause vignetting.

Red-Eye Reemmovaall

When Intelligent Face Detection (P32) and red-eye removal (P67) are

on, red-eye removal is available in auto (K; RED EYE REDUCTION), flash

on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.

Red-eye removal minimizes “red-eye”caused when light from the flash is

reflected from the subject’s retinas as shown in the illustration at right.

More on Photography

Using the SSelf-Timer

To use the self-timer, press the selector down (h)

and choose from the following options:

OFF

Option

T(OFF)

Description

Self-timer off.

The shutter is released ten seconds after the shutter button is pressed. Use for

self-portraits. The self-timer lamp on the front of the camera blinks while the

timer counts down.

S(10 SEC)

The shutter is released two seconds after the shutter button is pressed. Use to

reduce blur caused by the camera moving when the shutter-release button is

pressed. The self-timer lamp will blink as the timer counts down.

R(2 SEC)

More on Photography

Innttelligent Facce Deteeccttiioonn

Intelligent Face Detection sets focus and exposure for human faces anywhere

in the frame, preventing the camera from focusing on the background in

group portraits. Choose for shots that emphasize portrait subjects.

To use Intelligent Face Detection, press MENU/OK

to display the shooting menu and select ON for

bFACE DETECTION. Faces can be detected with

the camera in vertical or horizontal orientation; if a

face is detected, it will be indicated by a green bor-

der. If there is more than one face in the frame, the

camera will select the face closest to the center;

other faces are indicated by white borders.

Q In some modes, the camera may set exposure for the frame as a whole rather than

the portrait subject.

Q If the subject moves as the shutter button is pressed, their face may not be in the

area indicated by the green border when the picture is taken.

More on Photography

nFace Recognnition

The camera can store information on the face and personal

details (name, relationship, and birth date) of portrait sub-

jects and assign these subjects priority for Intelligent Face

Detection or display their names and other information

during playback.

Happy Birthday!

Adding New Faces

Follow the steps below to add faces to the face recognition database.

Select REGISTER.

Select REGISTER for nFACE RECOGNITION in the shooting menu.

R To disable face recognition, select OFF.

Take a photograph.

After checking that the subject is facing the camera,

frame the subject using the guides and take the pho-

tograph.

CAPTURE THE FACE

ALONG WITH THE GUIDLINE

CANCEL

R If an error is displayed, take the photograph again.

More on Photography

nFace Recognition

Enter face recognition data

Press MENU/OK to display face recognition data and enter the following in-

formation:

• NAME: Enter a name of up to 14 characters and press MENU/OK.

• CATEGORY: Choose the option that describes your relationship to the sub-

ject and press MENU/OK.

• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.

R If you zoom in on the face of a person in the face recognition database on their

birthday, the camera will display their name and the message“Happy Birthday!”.

More on Photography

nFace Recognition

Viewing, Editing, and Deleting Existing Data

Follow the steps below to view, edit, or delete face recognition data.

Select VIEW & EDIT for nFACE RECOGNITION.

Select a face.

View or edit face recognition data.

The name, category, or birth date can be edited as described in Step 3 of

“Adding New Faces” (P33). To retake the photo, select REPLACING IM-

AGE and shoot a new portrait as described above.

R To delete face recognition data for the selected subject, select ERASE.

Adding Faces Automatically

To automatically add frequently-photographed subjects to the face recogni-

tion database, select ON for AUTO REGISTRATION in the face recognition

menu. If the camera detects a face that has been photographed many times

without being added to the database, it will display a message prompting you

to create a new face recognition entry. Press MENU/OK and enter face recogni-

tion data.

R The camera may sometimes fail to recognize new faces automatically. If necessary,

faces can be added manually using the REGISTER option.

More on Photography

nFace Recognition

Face Recognition

The camera can store up to eight faces. If you attempt to add a ninth face, a confir-

mation dialog will be displayed; use VIEW & EDIT to make room for new faces by

deleting existing data. AUTO REGISTRATION is disabled if there are already data for

eight faces.

When Intelligent Face Detection (P32) is on and the frame contains multiple sub-

jects from the face recognition database, the camera displays the name of the sub-

ject that will be used to set focus and exposure (the subject shown by the green

frame). If no name is entered, the camera will show “---”. Subjects identified using

face recognition but not used to set focus and exposure are shown by orange

frames, other subjects by white frames.

Q The camera may fail to identify subjects in the face recognition database if they

are not facing the camera or are only partly in the frame, or if details of the sub-

jects’faces or expressions differ markedly from those in the database.

More on Photography

More on Playback

Playback OOpptions

To view the most recent picture in the LCD monitor, press the abutton.

100-0001

Press the selector right to view pictures in the order recorded, left to view

pictures in reverse order. Keep the selector pressed to scroll rapidly to the

desired frame.

R Pictures taken using other cameras are indicated by a m(“gift image”) icon during

playback.

IFavorites: Rating Pictures

To rate the picture currently displayed in full-frame playback, press DISP/BACK

and press the selector up and down to select from zero to five stars.

Playback Options

Playback Zoom

Select i to zoom in on pictures displayed in single-frame playback; select

jto zoom out. When the picture is zoomed in, the selector can be used to

view areas of the image not currently visible in the display.

Zoom indicator

Navigation window shows

portion of image currently

displayed in LCD monitor

Press DISP/BACK to exit zoom.

R The maximum zoom ratio varies with image size. Playback zoom is not available

with cropped or resized copies saved at a size of a or smaller.

More on Playback

Playback Options

Multi-Frame Playback

Selecting jwhen a picture is shown full-frame in the LCD monitor displays

the current image with previous and following images in the background.

Select j to increase the number of images displayed to two, nine, or one

hundred, ito view fewer images.

100-0001

When two or more images are displayed, use the selector to highlight images

and press MENU/OK to view the highlighted image full frame. In the nine- and

hundred-frame displays, use the selector to view more pictures.

More on Playback

Deleting Piictures

PLAYBACK MENU

To delete individual pictures, multiple selected

pictures, or all pictures, press MENU/OK, select

AERASE (P65), and choose from the options

below. Note that deleted pictures can not be re-

covered. Copy important pictures to a computer

or other storage device before proceeding.

ERASE

BACK

FRAME

SELECTED FRAMES

ALL FRAMES

SET

Option

FRAME

Description

Press the selector left or right to scroll through pictures and press MENU/OK to delete

the current picture (a confirmation dialog is not displayed).

Highlight pictures and press MENU/OK to select or deselect (pictures that are protected

SELECTED or in a print order are shown by S). When the operation is complete, press DISP/BACK

FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the

selected pictures.

A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete

all unprotected pictures. Pressing DISP/BACK cancels deletion; note that any pictures

deleted before the button was pressed can not be recovered.

ALL

FRAMES

R Protected pictures can not be deleted. Remove protection from any pictures you

wish to delete (P68).

R If a message appears stating that the selected images are part of a DPOF print order,

press MENU/OK to delete the pictures.

More on Playback

Search for pictures.

Immaage SSearch

Select bIMAGE SEARCH in the playback menu (P65), highlight one of

the following search criteria, and press MENU/OK:

• BY DATE: Search by date.

• BY FACE: Search for faces from the face recognition database.

• BY IFAVORITES: Search by rating.

• BY SCENE: Search by scene.

• BY TYPE OF DATA: Find all still pictures or all movies.

• BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-

nation.

Select a search condition. Only pictures that match the search condi-

tion will be displayed. To delete or protect selected pictures or to view

the search results in a slide show, press MENU/OK and choose AERASE

(P40), DPROTECT (P68), or ISLIDE SHOW (P67).

More on Playback

Create books from your favorite photos.

PhotooBBoook Assist

Creating a PhotoBook

Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu

(P65) and choose from the following options:

• SELECT FROM ALL: Choose from all available pictures.

• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search

conditions (P41).

R Neither photographs a or smaller nor movies can be selected for photobooks.

Scroll through the images and press the selector up to select or deselect.

To display the current image on the cover, press the selector down. Press

MENU/OK to exit when the book is complete.

R The first picture selected becomes the cover image. Press the selector down to

select a different image for the cover.

Select COMPLETE PHOTOBOOK (to select all photos or all photos match-

ing the specified search conditions for the book, choose SELECT ALL). The

new book will be added to the list in the photobook assist menu.

Q Books can contain up to 300 pictures.

Q Books that contain no photos are automatically deleted.

More on Playback

kPhotoBook Assist

Viewing Photobooks

Highlight a book in the photobook assist menu and press MENU/OK to display

the book, then press the selector left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press MENU/OK. The following options will be dis-

played; select the desired option and follow the on-screen instructions.

• EDIT: Edit the book as described in“Creating a PhotoBook”(P42).

• ERASE: Delete the book.

Photoobooks

Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-

ware.

More on Playback

Viewing Panoramas

If you press the selector down when a panorama is displayed full frame, the

camera will play back the picture from left to right. To pause playback, press

the selector down; press the selector down again to resume. To delete the

panorama, press the selector up (b) when playback is stopped. To exit to full-

frame playback, press the selector up while panorama playback is in progress.

PLAY

STOP

PAUSE

More on Playback

Movies

Recordiinngg MMoviess

REC

12s

Shoot short movies with sound. During recording, zREC

and the time remaining will be displayed in the LCD moni-

tor and sound will be recorded via the built-in microphone

(be careful not to cover the microphone during recording).

Rotate the mode dial to FMOVIE.

Press the shutter button all the way down to start recording.

To end recording, press the shutter button again. Recording ends auto-

matically when the movie reaches maximum length or memory is full.

Zoooomm aadjustment

Zoom can be adjusted while recording is in progress. Select the type of zoom

available for pMOVIE ZOOM TYPE in the setup menu. Selecting 2OPTICAL

blocks sound being recorded when zooming.

Recording Movies

R Before recording, select a frame size using the OQUALITY option in the shooting

menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Definition),

f (640×480) to record standard definition movies, or g (320×240) for longer

movies.

R Focus, exposure, and white balance are adjusted automatically throughout record-

ing. The color and brightness of the image may vary from that displayed before

recording begins.

R Sounds made by the camera may be recorded.

Q The indicator lamp lights while movies are being recorded. Do not open the battery

chamber during shooting or while the indicator lamp is lit. Failure to observe this

precaution could prevent the movie from being played back.

Q Vertical or horizontal streaks may appear in movies containing very bright subjects.

This is normal and does not indicate a malfunction.

Q The temperature of the camera may rise if it is used to record movies for an ex-

tended period or if the ambient temperature is high. This is normal and does not

indicate a malfunction.

Movies

Viewing Movvies

100-006

During playback, movies are displayed in the LCD monitor

as shown at right. The following operations can be per-

formed while a movie is displayed:

PLAY

Option

Description

Start/pause Press the selector down to start playback. Press again to

playback pause.

End playback/ Press the selector up to end playback. If playback is not in

delete

progress, pressing the selector up will delete the movie.

Press the selector right to advance, left to rewind. If playback

is paused, the movie will advance or rewind one frame

each time the selector is pressed.

Advance/

rewind

Press MENU/OK to pause playback and display volume con-

trols. Press the selector up or down to adjust the volume

and press MENU/OK to exit. Volume can also be adjusted

from the setup menu.

Adjust voolume

Q Do not cover the speaker during playback.

Movies

Connections

Viewing Pictures on TV

Connect the camera to a TV to show pictures to a group.

Turn the camera off and connect an optional A/V cable as shown below.

Connect yellow plug

to video-in jack

Insert into

USB multi-connector

Connect white

plug to audio-in jack

Q When connecting cables, be sure the connectors are fully inserted.

R Image quality may drop during movie playback.

R To view high definition movies on a high definition TV, the optional accessory

is required (P79, 80).

Tune the television to the video input channel. See the documentation

supplied with the television for details.

Press the abutton for about a second to turn the camera on. The camera

monitor turns off and pictures and movies are played back on the TV. Note

that the camera volume controls have no effect on sounds played on the

TV; use the television volume controls to adjust the volume.

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected

directly to the printer as shown below and pictures can be printed

without first being copied to a computer. Note that depending on

the printer, not all the functions described below may be supported.

Connect the supplied USB cable as shown and turn the printer on.

Press the abutton for about a second to turn the camera on.

Press the selector left or right to display a picture you wish to print.

Press the selector up or down to choose the number of copies (up to 99).

Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a

confirmation dialog when settings are complete.

Connections

Printing Pictures via USB

Press MENU/OK to start printing. Printing can be interrupted by pressing

DISP/BACK, but note that some printers may not respond immediately. If the

printer stops before printing is complete, turn the camera off and then on

again.

After confirming that PRINTING has cleared from the camera display, turn

the camera off and disconnect the USB cable.

R Pictures can be printed from a memory card that has been formatted in the camera.

R If no pictures are selected, the camera will print one copy of the current picture.

R Page size, print quality, and border selections are made using the printer.

Printinng thee DDaattee ooff RReecoorrding

To print the date of recording on pictures, press DISP/BACK in the PictBridge display

and select PRINT WITH DATE s in the PictBridge menu (to print pictures without

the date of recording, select PRINT WITHOUT DATE).

Connections

Printing Pictures via USB

Printing the DPOF Print Order

The KPRINT ORDER (DPOF) option in the playback menu can be used to

create a digital “print order” for PictBridge-compatible printers (P79) or de-

vices that support DPOF.

DPOF

DPOF (Digital Print Order Format) is a standard that allows pictures to be

printed from “print orders” stored on a memory card. The information in

the order includes the pictures to be printed and the number of copies of

each picture.

Select playback mode and press MENU/OK to display the playback menu.

Highlight KPRINT ORDER (DPOF) and press MENU/OK.

Highlight one of the following options and press MENU/OK:

• WITH DATEs: Print the date of recording on pictures.

• WITHOUT DATE: Do not print the date of recording on pictures.

R Some printers do not support date printing. See the printer manual for details.

Press the selector left or right to display a picture you wish to add to or

remove from the print order.

Connections

Printing Pictures via USB

Press the selector up or down to choose the number of copies (up to 99).

To remove a picture from the print order, press the selector down until the

number of copies is zero.

Repeat Steps 4–5 to complete the print order and press MENU/OK when

settings are complete.

A confirmation dialog will be displayed. Press MENU/OK to save the print

order.

R Print orders can contain a maximum of 999 pictures.

R If a memory card is inserted containing a print order created by another camera,

a message will be displayed. Create a new print order as described above.

Connections

Viewingg Picturreess oonn aa CCoommppuutter

The supplied software can be used to copy pictures to a computer, where

they can be stored, viewed, organized, and printed. Before proceeding, install

the software as described below. Do NOT connect the camera to the computer

until installation is complete.

Windows: Installing MyFinePix Studio

Confirm that the computer meets the following system requirements:

Windows 7^*

Windoows Vista^*

Windows XP^*

2GHz Pentium 4 or

better

CPU

3GHz Pentium 4 or better

RAM

Free disk space

1GB or more

15GB or more

512MB or more

2GB or more

• 1024×768 pixels or more with 24-bit color or better

• A graphics processing unit (GPU) that supports DirectX 7 or later

Video

• Built-in USB port recommended. Operation is not guaranteed with other

USB ports.

Other

• Internet connection (broadband recommended) required to install .NET

Framework (if necessary), to use auto update feature, and when performing

such tasks as sharing pictures on-line or via e-mail.

* Other versions of Windows are not supported. Only pre-installed operating systems are

supported; operation is not guaranteed on home-built computers or computers that have

been upgraded from earlier versions of Windows.

Start the computer. Log in to an account with administrator privileges be-

fore proceeding.

Connections

Viewing Pictures on a Computer

Exit any applications that may be running and insert the installer CD in a

CD-ROM drive.

Windoows 7/Wiindows Vista

If an AutoPlay dialog is displayed, click SETUP.EXE. A“User Account Control”dia-

log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).

The installer will start automatically; click Install MyFinePix Studio and

follow the on-screen instructions to install MyFinePix Studio.

If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly

If the installer does not start automatically, select Computer or My Computer

from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX

CD window and double-click setup or SETUP.EXE.

If prompted to install Windows Media Player, DirectX, or .NET Framework,

follow the on-screen instructions to complete installation.

Remove the installer CD from the CD-ROM drive when installation is com-

plete. Store the installer CD in a dry location out of direct sunlight in case

you need to re-install the software.

Installation is now complete. Proceed to“Connecting the Camera”(P57).

Connections

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer

Confirm that the computer meets the following system requirements:

CPU

PowerPC or Intel

Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.

com/support/digital_cameras/compatibility/ for more information)

RAM

256MB or more

A minimum of 200MB required for installation with 400MB available when

FinePixViewer is running

800×600 pixels or more with thousands of colors or better

Free disk space

Video

Built-in USB port recommended. Operation is not guaranteed with other USB

ports.

Other

After starting the computer and quitting any applications that may be run-

ning, insert the installer CD in a CD-ROM drive and double-click Installer

for Mac OS X.

An installer dialog will be displayed; click Installing FinePixViewer to start

installation. Enter an administrator name and password when prompted

and click OK, then follow the on-screen instructions to install FinePixViewer.

Click Exit to quit the installer when installation is complete.

Connections

Viewing Pictures on a Computer

Remove the installer CD from the CD-ROM drive. Note that you may be

unable to remove the CD if Safari is running; if necessary, quit Safari before

removing the CD. Store the installer CD in a dry location out of direct sun-

light in case you need to re-install the software.

Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,

and select Preferences… from the Image Capture application menu. The

Image Capture preferences dialog will be displayed; choose Other… in

the When a camera is connected, open menu, then select FPVBridge

in the“Applications/FinePixViewer”folder and click Open. Quit Image Cap-

ture.

Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”

folder and start Image Capture. The camera will be listed under DEVICES;

select the camera and choose FPVBridge from the Connecting this cam-

era opens menu and click Choose. Quit Image Capture.

Installation is now complete. Proceed to“Connecting the Camera”(P57).

Connections

Viewing Pictures on a Computer

Connecting the Camera

If the pictures you wish to copy are stored on a memory card, insert the

card into the camera.

R Windows users may require the Windows CD when starting the software for

the first time.

Q Loss of power during transfer could result in loss of data or damage to the mem-

ory card. Charge the battery before connecting the camera.

Turn the camera off and connect

the supplied USB cable as shown,

making sure the connectors are

fully inserted. Connect the cam-

era directly to the computer; do

not use a USB hub or keyboard.

Press the abutton for about a second to turn the camera on. MyFinePix

Studio or FinePixViewer will start automatically; follow the on-screen in-

structions to copy pictures to the computer. To exit without copying pic-

tures, click Cancel.

R If the software does not start automatically, it may not be correctly installed.

Disconnect the camera and reinstall the software.

Connections

Viewing Pictures on a Computer

For more information on using the supplied software, start the application

and select the appropriate option from the Help menu.

Q If a memory card containing a large number of images is inserted, there may be a

delay before the software starts and you may be unable to import or save images.

Use a memory card reader to transfer pictures.

Q Make sure that the computer does not display a message stating that copying is in

progress and that the indicator lamp is out before turning the camera off or discon-

necting the USB cable (if the number of images copied is very large, the indicator

lamp may remain lit after the message has cleared from the computer display).

Failure to observe this precaution could result in loss of data or damage to the

memory card.

Q Disconnect the camera before inserting or removing memory cards.

Q In some cases, it may not be possible to access pictures saved to a network server

using the supplied software in the same way as on a standalone computer.

Q The user bears all applicable fees charged by the phone company or Internet ser-

vice provider when using services that require an Internet connection.

Connections

Viewing Pictures on a Computer

Disconnecting thhee CCamera

After confirming that the indicator lamp is out, turn the camera off and disconnect

the USB cable.

Uninstalling the Supplied Softtwwaarree

Only uninstall the supplied software when it is no longer required or before begin-

ning reinstallation. After quitting the software and disconnecting the camera, drag

the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash

in the Finder menu (Macintosh), or open the control panel and use “Programs and

Features”(Windows 7/Windows Vista) or“Add or Remove Programs”(Windows XP) to

uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may

be displayed; read the contents carefully before clicking OK.

Connections

Menus

Using the MMenus: Shhoooottiinngg MMode

Using the Shooting Menu

To display the shooting menu, press MENU/OK in

shooting mode. Highlight items and press the se-

lector right to view options, then highlight an op-

tion and press MENU/OK. Press DISP/BACK to exit when

settings are complete. The options available vary with the shooting mode

selected.

Shooting Menu Options

ASCENE POSSITION

(SP1 defaults to r, SP2 to K)

Choose a scene for the current scene position mode (SP1 or SP2; P21).

NISO

(defaults to AUTO)

Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-

tling may appear in pictures taken at high sensitivities.

100

Bright

ISO

Scene

3200

Dark

Less noticeable

Nooiissee ((mmottling)

More noticeable

Option

Description

Sensitivity is adjusted automatically in response to shooting condi-

tions.

AUTO

3200 / 16000 / 800 / 400 /

200 / 100

Sensitivity is set to the specified value, which is shown in the display.

Using the Menus: Shooting Mode

OIMAGE SIZE

(defaults to O 4:3)

Choose the image size and aspect ratio at which pictures are record-

ed. Large pictures can be printed at large sizes with no drop in quality,

while small pictures require less memory, allowing more pictures to be

recorded.

O4 : 3

Size Aspect ratio

Size Versus Aspect Ratio

Size

Option

Prints at sizes up to

34×25cm (13.5×10in.)

24×18cm (9.5×7in.)

17×13cm (7×5in.)

Aspect ratio

4 : 3: Pictures have the same

proportions as the camera

display.

3 : 2: Pictures have the same 16 : 9: Suited for display on

proportions as a frame of

High Definition (HD) devices.

35mm film.

Menus

Using the Menus: Shooting Mode

TIMAGE QUALITY

(defaults to N)

Choose how much image files are compressed.

Option

Description

FINE

Low compression. Select for higher image quality.

NORMAL

High compression. Select this option to store more pictures.

PFINEPIX COLOR

(defaults to <)

Enhance contrast and color saturation or take pictures in black and white.

Option

Description

c F-STANDARD Standard contrast and saturation. Recommended in most situations.

Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens

and blues in landscapes.

a F-CHROME

b F-B&W

Take pictures in black and white.

R Seettttiinnggs otheer than c F-STANDARD arre shownn byy aann iiccoonn iinn tthe LCD monitor.

R Depending on the subject, the effects of a F-CHROME may not be visible in the LCD

monitor.

Menus

Using the Menus: Shooting Mode

DWHITE BAALLANCE

For natural colors, choose a setting that matches the light source.

(defaults to AUTO)

Option

AUTO

Description

White balance adjusted automatically.

For subjects in direct sunlight.

For subjects in the shade.

Use under“daylight”fluorescent lights.

Use under“warm white”fluorescent lights.

Use under“cool white”fluorescent lights.

Use under incandescent lighting.

R Reessuullttss vvaarryy wwiitthh sshooting cconditionss. Play pictures back after shooting ttoo cchheecckk ccoolloorrss iinn

the LCD monitor.

RCONTINUOUS

(defaults to OFF)

Capture motion in a series of pictures.

Option

Description

ITOP 3 The camera takes up to 3 pictures while the shutter button is pressed.

OFF One photograph is taken each time the shutter-release button is pressed.

R Focus aand expoosure aarre deteerrmined bby the first frame in each seeries.

R Thhee ffllaasshh ttuurrnnss off automatically. Thhee pprreeviously selected flash mode is restored when OFF is

selected for RCONTINUOUS.

R Frame rate varies with shutter speed.

R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.

Menus

Using the Menus: Shooting Mode

bFACE DETECTION

Choose whether the camera automatically detects and sets focus and exposure for human por-

trait subjects (P32).

FAF MODE

This option controls how the camera selects the focus area. Regardless of the option selected,

the camera will focus on the subject in the center of the LCD monitor when macro mode is on.

Option

Description

rCENTER

The camera focuses on the subject in the center of the frame.

Position the subject in the center focus area and press the selector left. Focus will

track the subject as it moves through the frame.

xTRACKING

R Note that iin x mode, tthe camerraa focuses ccontinuoussly, increeaasing the drain on the batteries,

and that the sound of the camera focusing may be audible.

nFACE RECOGGNITION

Add portrait subjects to the face recognition database. These subjects will be given priority

during Intelligent Face Detection, and their names and other information can be viewed during

playback (P 33).

PMODE

(defaults to C)

Choose how panoramas are framed (P22).

OQUALITY

(defaults to h)

Choose a frame size for movies (P46).

Menus

Using the MMenus: Playbbaacckk MMode

Using the Playback Menu

To display the playback menu, press MENU/OK in

playback mode. Highlight items and press the

selector right to view options, then highlight an

option and press MENU/OK. Press DISP/BACK to exit

when settings are complete.

Playback Menu Options

kPHOTOBOOK ASSIST

Create books from your favorite photos (P42).

bIMAGE SEARCH

Search for pictures (P41).

AERASE

Delete all or selected pictures (P40).

Menus

Using the Menus: Playback Mode

jMARK FOR UPLOAD TO

Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).

■ Selecting Pictures for Upload

Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and

movies for upload to Facebook.

Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press

DISP/BACK to exit when all the desired pictures are selected.

R Only movviieess ccaann bbee sseelleected for upload to YouTube.

R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.

■ RESET ALL: Deselecting All Pictures

Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a

message will be displayed while the operation is in progress. Press DISP/BACK to exit before the

operation is complete.

■ Uploading Pictures (Windows Only)

Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix

Studio.

Select with camera

Upload from computer

For information on installing MyFinePix Studio and connecting the camera to a computer, see

“Viewing Pictures on a Computer”(P53).

Menus

Using the Menus: Playback Mode

ISLIDEE SHOW

(defaults to MULTIPLE)

View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.

Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at

any time by pressing MENU/OK.

Option

NORMAL

Description

Press selector left or right to go back or skip ahead one frame. Select FADE-IN

for fade transitions between frames.

FADE-IN

NORMAL g

FADE-IN g

MULTIPLE

As above, except that camera automatically zooms in on faces selected with

Intelligent Face detection.

Display several pictures at once.

R Thhee ccaammeerraa will not turn off automatically while a sllide shooww iiss iinn pprrooggress.

BRED EYE RREMOVAL

If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face

Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-

eye is detected, the image will be processed to create a copy with reduced red-eye.

Display the desired picture.

Select BRED EYE REMOVAL in the playback menu.

Press MENU/OK.

R Reedd eeyyee mmaayy nnoott bbee rreemmooved iff the camerra is unable to detect a face or thhee ffaaccee iiss iinn pprrooffiillee..

Reessuullttss mmaayy ddiiffferr dependiing on the sscene. Reedd eeyyee ccaann nnoott bbee rreemmooved from pictures that

have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..

R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..

R Copies created with BREDD EYE REMMOVAL arre indiccatedd bby a eicon during playback.

Menus

Using the Menus: Playback Mode

DPROTECT

Protect pictures from accidental deletion.

Select DPROTECT in the playback menu.

Highlight one of the following options and press MENU/OK:

• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press

MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.

• SET ALL: Protect all pictures.

• RESET ALL: Remove protection from all pictures.

Q Protected pictures will be deleted when the memory card is formatted (P73).

GCROP

Create a cropped copy of the current picture.

Display the desired picture.

Select GCROP in the playback menu.

Use the zoom control to zoom in and out and use the selector to scroll the picture until the

desired portion is displayed.

Press MENU/OK to display a confirmation dialog.

Press MENU/OK again to save the cropped copy to a separate file.

R Larger crrops prroducee larggeer copiies; alll coppiies haavve an asspect rratioo oof 4:33.. If thee sizee oof the ffinal

copyy wwill be a, OK will be diisplayed iinn yyeelllloow.

Menus

Using the Menus: Playback Mode

ORESIZE

Create a small copy of the current picture.

Display the desired picture.

Select ORESIZE in the playback menu.

Highlight a size and press MENU/OK to display a confirmation dialog.

Press MENU/OK to save the resized copy to a separate file.

R Thhee ssiizzeess aavailable vary with the size of the originnal image.

CIMAGE ROTATE

Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD

monitor.

Display the desired picture.

Select CIMAGE ROTATE in the playback menu.

Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-

wise.

Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it

is played back on the camera.

R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P68).

R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.

Menus

Using the Menus: Playback Mode

nERASE FACE RECOG.

Remove face recognition links from the current image. When this option is selected, the cam-

era will zoom in on an area in the current picture that it has matched with a face in the face

recognition database. If the match is not correct, press MENU/OK to remove the link to the face

recognition database.

R Face reccognitiioon links ccan not bbe removed from copies with a size off a or smaller.

KPRINT ORDER (DPOF)

Select pictures for printing on DPOF- and PictBridge-compatible devices (P51).

Menus

The Setup MMenu

Using the Setup Menu

Display the setup menu.

1.1 Press MENU/OK to display the menu for the cur-

rent mode.

SET-UP

1.2 Press the selector left to highlight the tab for

the current menu.

SET

EXIT

Tab

1.3 Press the selector down to highlight X.

1.4 Press the selector right to place the cursor in the setup menu.

Adjust settings.

Highlight items and press the selector right to view options, then high-

light an option and press MENU/OK. Press DISP/BACK to exit when settings

are complete.

Menus

The Setup Menu

Setup Menu Options

FDATE/TIME

Set the camera clock (P15).

NTIME DIFFERENCE

(defaults to h)

Switch the camera clock instantly from your home time zone to the local time at your destina-

tion when traveling. To specify the difference between local time and your home time zone:

Highlight g LOCAL and press the selector right.

Use the selector to choose the time difference between local time and your home time zone

in increments of 15 minutes.

Press MENU/OK.

To switch between local time and your home time zone, highlight g LOCAL or h HOME and

press MENU/OK.

Option

Description

hHOME

Switch to the time currently selected for FDATE/TIME (see above).

Switch to local time. If this option is selected, g and the time and date will

be displayed in yellow for three seconds each time the camera is turned on.

gLOCAL

(defaults to ENGLISH)

Choose a language (P97).

oSILENT MODE

(defaults to OFF)

Select ON to disable the speaker and flash in situations in which camera sounds or lights may be

unwelcome (note that the fl ash will still fi re in Cmode).

Menus

The Setup Menu

RRESET

Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,

and QVIDEO SYSTEM to default values.

Highlight RRESET and press the selector right to display a confirmation dialog.

Highlight OK and press MENU/OK.

KFORMAT

This option will format the memory card. When a memory card is inserted in the camera, select

OK to begin formatting.

Q All data—iincluuding pprotectedd picturess——will be deleted from the memmory card.. Be sure im-

portant files have been copied to a comppuutteerr oorr ootthheerr ssttoorraaggee ddeevice.

Q Do nott open tthe baattteryy--chambber cover during formatting.

AIMAGE DISP.

(defaults to 1.5 SEC)

Choose how long pictures are displayed in the LCD monitor after shooting.

Option

3 SEC

Description

Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).

Colors may differ slightly from those in the final image.

1.5 SEC

ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.

OFF

Pictures are not displayed after shooting.

R OFF has no effect in continuous shooting mode.

Menus

The Setup Menu

BFRAME NO.

(defaults to CONT.)

New pictures are stored in image files named using a four-digit file

number assigned by adding one to the last file number used. The file

number is displayed during playback as shown at right. BFRAME NO.

controls whether file numbering is reset to 0001 when a new memory Directory

Frame number

100-0001

File

card is inserted or the current memory card is formatted.

number

Option

Description

Numbering continues from the last file number used or the first available

file number, whichever is higher. Choose this option to reduce the num-

ber of pictures with duplicate file names.

CONTINUOUS

Numbering is reset to 0001 after formatting or when a new memory card

is inserted.

RENEW

R If the frame number reaches 999-9999, the shutter release will be disabled (P90).

R Seelleecttiing RRESET ((P73) setss BFRAME NO. tto CONTINUOUS but doees not reeset the

file number.

R Frame numbers for pictures taken with other cameras may differ.

GOPERATTIONN VVOL.

(defaults to c)

Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF

(mute) to disable control sounds.

HSHUTTEER VOLUME

(defaults to c)

Adjust the volume of the sounds produced when the shutter is released. Choose eOFF (mute)

to disable the shutter sound.

Menus

The Setup Menu

eSHUTTER SOUND

(defaults to i)

Choose the sound made by the shutter.

IPLAAYYBBAACCKK VVOLUME

(defaults to 7)

Adjust the volume for movie playback.

JLCD BRIGHTNESS

(defaults to 0)

Control the brightness of the display.

R In modes other than P, display brightness is automatically adjusted during sshhoooottiinngg iinn rree--

sponse to ambient lighting conditions, regardless of the option selected for JLCD BRRIGHT-

NESS.

ELCD MODE

(defaults to UON)

Choose whether the display automatically dims to save power.

MAUTO PPOWER OFF

(defaults to 2 MIN)

Choose the length of time before the camera turns off automatically when no operations are

performed. Shorter times increase battery life; if OFF is selected, the camera must be turned

off manually. Note that in some situations the camera turns off automatically even when OFF

is selected.

LDUAL IS MODE

(defaults to l)

Enable image stabilization during shooting (l CONTINUOUS) or only when the shutter but-

ton is presssed halfwway (m SHOOTING ONLY). OFF turnns image sttabilizattion off.. We recom-

mend that you turn dual IS off when using a tripod.

Menus

The Setup Menu

BRED EYE RREMOVAL

(defaults to ON)

Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face

Detection.

R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..

mBLINK DETECTION

(defaults to ON)

Choose ON to activate blink detection. If an option other than OFF is selected for AIMAGE

DISP. (P73), a warning will be displayed if the camera detects subjects who may have blinked

when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the f button

to zoom in on these subjects.

BLINK DETECTION

FACE ZOOM

STORE

ERASE

R Blink deetecttiion is nnot peerformed iff the ccamerraa failss to deetect a facee or whhen OFF iis selected

for AIMAGE DISP..

Menus

The Setup Menu

DDIGITAL ZOOM

(defaults to OFF)

If ON is selected, selecting iat the maximum optical zoom position will trigger digital zoom,

further magnifying the image.

Thhe Zoooomm IInnddicattoor

DIGITAL ZOOM on

Optical zoom

Digital zoom

DIGITAL ZOOM off

Q Digital zooom prrooducess lower quality images than optical zoom.

pMOVIE ZOOM TYPE

(defaults to 1)

Choose the type of zoom available during movie recording.

R Digital zooom prrooducess lower quality images than optical zoom.

R Soouunndd iiss nnoott rreeccoorrddeedd wwhhen opttical zzoom iss used.

Menus

The Setup Menu

nSAVE ORG IMAGE

(defaults to OFF)

Select ON to save unprocessed copies of pictures taken with red-eye removal.

OBACKGROUNND COLOORR

Choose a color scheme.

cGUIDANCE DISPPLLAY

(defaults to ON)

Choose whether to display tool tips.

QVIDEO SSYSTEM

(defaults to NTSC)

Choose a video mode for connection to a TV.

Option

NTSC

Description

Select this mode for connection to video devices in North America, the Carib-

bean, parts of Latin America, and some East Asian countries.

Select this mode for connection to video devices in the United Kingdom and

much of Europe, Australia, New Zealand, and parts of Asia and Africa.

PAL

Menus

Technical Notes

Oppttiioonnaall AAcccesssoories

The camera supports a wide range of accessories from FUJIFILM and other

manufacturers.

DIGITAL CAMERA

FINEPIX

T300/T200/T190 Series

■ Printing

■ Audio/Visual

A/V cable (optional)

USB cable

(supplied)

TV^*

PictBridge-compatible

printer^*

SD/SDHC

memory card

HDMI cable

(sold separately)

HDTV^*

Printer^*

HDP-L1

HD player

■ Computer Related

USB cable (supplied)

SD card slot or card reader

Computer^*

* Available separately.

Optional Accessories

Accessories from FUJIFILM

The following optional accessories are available from FUJIFILM. For the lat-

est information on the accessories available in your region, check with your

local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_

cameras/index.html.

Recharggeeable NP-45A: Additional large-capacity NP-45A rechargeable

Li-ion batteries batteries can be purchased as required.

BC-45W: Replacement battery chargers can be purchased

as required. The BC-45W charges an NP-45A battery in

about 120 minutes at +20°C (+68°F).

Battery

chargers

A/V cable

AV-C1: Use for viewing pictures on TV.

HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-

nect to a High Definition (HD) TV to view photographs

and movies from SD/SDHC memory cards.

HD players

Technical Notes

Caring for the Camera

To ensure continued enjoyment of the product, observe the following pre-

cautions.

Storage and Use

If the camera will not be used for an ■ Water and Sand

extended period, remove the battery Exposure to water and sand can also

and memory card. Do not store or damage the camera and its internal

use the camera in locations that are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

circuitry and mechanisms. When us-

ing the camera at the beach or sea-

side, avoid exposing the camera to

• exposed to direct sunlight or very water or sand. Do not place the cam-

high temperatures, such as in a era on a wet surface.

closed vehicle on a sunny day

■ Condensation

• extremely cold

Sudden increases in temperature,

• subject to strong vibration

such as occur when entering a heated

• exposed to strong magnetic fields,

building on a cold day, can cause con-

such as near a broadcasting anten-

densation inside the camera. If this

na, power line, radar emitter, motor,

occurs, turn the camera off and wait

transformer, or magnet

an hour before turning it on again. If

• in contact with volatile chemicals

condensation forms on the memory

such as pesticides

card, remove the card and wait for the

• next to rubber or vinyl products

condensation to dissipate.

Technical Notes

Caring for the Camera

Cleaning

Use a blower to remove dust from the lens and LCD monitor, then gently wipe

with a soft, dry cloth. Any remaining stains can be removed by wiping gently

with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-

cleaning fluid has been applied. Care should be taken to avoid scratching the

lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.

Do not use alcohol, thinner, or other volatile chemicals.

Traveling

Keep the camera in your carry-on baggage. Checked baggage may suffer

violent shocks that could damage the camera.

Technical Notes

Troubleshooting

Problems and Solutions

Power and Battery

Problem

Solution

• Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery

(P8).

• Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P8).

• Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chhaambbeerr ccoovveerr ((P9).

The cameraa does noot

turn on.

• Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert

it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.

• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.

The battery runs down • Q is selected for shooting mode: Select B mode to reduce the drain on the battery

quickly.

(P20).

• x TRACKING is selected for FAF MODE: Seelectt a diffferent AF mode (P64).

• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging

life. Purchase a new battery.

The cameraa turns off

suddenly.

Charge the battery ((P6) orr iinsertt a fullly-charged spare battery (P8).

Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P6).

Charging is slow.

Charge the battery at room temperaturre (Pvi).

• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.

• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging

life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.

• Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to sstabiliize (P 99).

The charging lamp lights,

but the battery does not

charge.

Problems and Solutions

Menus and Displays

Problem

Solution

Menus and displays are

not inn English.

Select ENGLISH for La (P15, 72).

Shooting

Problem

Solution

• Memory is full: Insert a new memory carrd or ddeletee pictures (P9, 40).

• Memory is not formatted: Format the memory caard (P73).

• Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.

Noo ppiiccture is taken when • Thhee memory cardd iiss ddaamaged: Insert a new memory card (P9).

the shutter button is

pressed.

• Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery

(P8).

• Thhee ccaammeerraa hhaass ttuurrnneedd ooffff aauuttoommaattiiccaalllly: Turn the camerra on (P13).

• Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until

the indicattor lampps turnss off (P3).

The LCD monitor goes

dark aftter shhooting.

The LCD monitor may darken while the flash charges. Wait for the flash to charge (P29).

• Thhee ssuubbjjeecct is close to the camera: Select macro mode (P28).

• Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P28).

• Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P25).

The cameraa does noot

focus.

Macro mode is not

available

Choose a diffeerreennt shooting mode (P20).

Intelligent Face Detection Intellligennt Facee Detecction iis nnoott aavvaaiillaabbllee iinn tthhee ccuurrrrent shhoottiinngg mmooddee: Choose a ddiffer-

is not available. ent shooting mode (P20).

Troubleshooting

Problems and Solutions

Problem

Solution

• Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove

the obsttructions.

• Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that

the subject’s face occupiees a laarrger area off the frame (P32).

Noo fface is detected.

• Thhee ssuubbjjeecct’s head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.

• Thhee ccaamera is tilted: Keep the camera leevel (P17).

• Thhee ssuubbjjeecctt’’ss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.

Wrong subject is

selected.

The selected subject is closer to the center of the frame than the main subject. Recompose tthhee

picture or turn face detection off and frame the picture using focuus lockk (P25).

• Thhee ffllash is not available in thee current shooting mode: Choose a diffeerreenntt sshhooooting mode

(P20).

• Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery

(P8).

The flash does not fire.

• Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P63).

• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).

• Thhee ffllash is off (P): Choose a diffeerreent flash mode (P29).

• Thhee ddeessireedd ffllaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhe curreenntt sshhoooottiinngg mmooddee: Choose a diffeerent

shooting mode (P20).

• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).

Some flash modes are

not available.

• Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P97).

• Thhee ffllaasshh wwindow is obstructed: Hoolldd tthhee ccamera correctly (P17).

• Thhee ccaamera is zoomed out: Zoom the cameera in (P17).

The flash does not fully

light the subject.

• Thhee lleennss iiss ddiirrtty: Clean the lens (P82).

• Thhee lleens is blocked: Keep objects away from the lens (P17).

• sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus

before shooting (P88).

Pictures are blurred.

• kis displayed during shooting: Use the flash or a tripod (P30).

Troubleshooting

Problems and Solutions

Problem

Solution

This is normaal wheenn slow sshutteer speeeds are seleccted att high tteemmppeerraattuurreess aanndd ddooeess nnoott iinnddiiccaattee

a malfunction.

Pictures are mottled.

Vertical lines appear in The caammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh tteemmppeerraattuurreess.. TTuurrnn tthhee ccaammeerraa ooffff aanndd wwaaiitt ffoorr

pictures. it to cool down.

“Smear”in the form of Vertical purple or white lines may appear after tthe ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh

vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD

lines appears in the

display.

image seensorss and ddooes nott indiccaattee aa mmaallffuunnccttiioonn.. TThheessee lliinneess aarree rreeccoorrddeedd iinn mmoovviieess bbuutt ddoo nnoott

appear in photographs. Avoid framing bright objects when filming movies.

Playback

Problem

Solution

Pictures are grainy.

The pictures were taken with a different make or model of camera.

Playback zoom is unavail-

able.

The pictures were created using ORESIZE or with a different make or model of camera.

• Playback volume is too low: Adjust playback volume (P75).

• Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P17, 45).

• Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P47).

• When 2OPTICAL is seelecteed for pMOOVIE ZOOM TYPE, zoooming bblocks

soundd beinngg rrecoorded: Select 1DIGITAL for pMOVIE ZOOM TYPPE (P77).

Noo ssoouund in movie

playback.

Selected pictures are not Some of the pictures selected foorr ddeelleettiioonn aarree pprrootteecctteedd.. RReemmoovvee pprrootteeccttiioonn uussiinngg tthhee ddeevviiccee wwiitthh

deleted

which it was originally applied (P68).

File numbering is

The batterry--cchhamber cover was opened while the camerra was on.. Turn the ccaammeerraa ooffff bbeeffore

unexpectedly reset.

opening thhe baatttteerryy-chamberr ccoovveerr ((P13).

Troubleshooting

Problems and Solutions

Connections/Miscellaneous

Problem

Solution

• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera pproperlly (P48).

• An A/V cable was connected dduring movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--

back has ended.

Noo ppiiccture or sound.

• Input on the television is set to “TV”: Set input to “VIDEO”.

• Thhee camera is not sett to tthhee ccoorrrrect viiddeeoo ssttaannddaarrd: Match the camerra QVIDEO SYS-

TEM setting to the TV (P78).

• Thhee vvoolume on the TV is too low: Adjust the volume.

Noo coolor

Match the cammera QVIDEO SYSTEM setting to the TV (P78).

The computer does not

recognize the camera.

Be sure the cameraa and coomputter aree correctly connected (P57).

Pictures caan not bbe

printed.

• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P49).

• Thhee pprrinter is off: Turn the printer on.

Only one copy is printed/

the date is not printed.

The printer is not PictBriidge commpatible.

• Temporary camera malfunction: Remove and reinsert the battery (P8).

• Thhee bbaatttery is exhausted: Charge the battery (P6) or iinsert a ffully-charged spare bbattery

(P8).

The cameraa is unree-

sponsive.

The cameraa does noot

function as expected.

Remove and reinsert the battery (P8). If the problem persists, contact your FUJIFILM dealer.

Noo sound.

Turn silent mode off (P72).

Troubleshooting

Warning Meessages and DDissplays

The following warnings are displayed in the LCD monitor:

Warning

B(red)

A(blinks red)

Description

Low batttery. Charge the battery (P6) or iinsert aa fullyy-charged spare battery (P8).

Battery eexhausteed. Charge the battery (P6) or inseert a fullly-charged spare battery (P8).

Slow shutter speed. Pictures may be blurred; use the flash or a tripod.

The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:

• Use fooccuss lock to focus on annother suubject at the same distance, then recompose the picture

(P25).

(displayed in red with red

focus frame)

• Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P28).

Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. IIff tthhee ssuubbjjeecctt

displayed in red

is dark, use the flash (P29).

FOCUS ERROR

TURN OFF THE CAMERA

AND TURN ON AGAIN

Camera malfunction or moving parts of lens oobbssttrruucctteedd.. TTuurrnn tthhee ccaammeerraa ooffff aanndd tthheenn oonn aaggaaiinn,,

takiinngg ccare not to touch the lens. If the message persists, contact a FUJIFILM dealer.

• Thhee mmeemmoorryy ccaarrdd iiss nnoott ffoorrmmaatttteedd oorr wwaass ffoorrmmaatttteedd iinn aa ccoommppuutteerr oorr ootthheerr ddee--

vice: Format the memory caard usinng the KFORMAT option in the cameera settuup menu

(P73).

• Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff

the message is repeated, format the card (P73). If the message persists, replace tthhee ccard.

• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.

CARD NOT INITIALIZED

PROTECTED CARD

BUSY

The memory caard is locked. Unlock the ccard (P9).

The memory caard is inccorrecttly formatted. Use the cammera to foormat the card (P73).

Troubleshooting

Warning Messages and Displays

Description

Warning

The memory card iss not formatted for use in the camera. Format the carrd (P73).

The memory caard contaacts require cleaning or the memoryy ccard is damaged. Clleeaann tthhee ccoonnttaaccttss

with a softt,, ddry clotthh. If the mmessage is repeated, foorrmmaatt tthhee ccaarrdd ((P73). If the message

persists, replace the card.

CARD ERROR

Incompatible memory card. Usse a compatible card (P10).

Camera malfunction. Contact a FUJIFILM dealer.

The memory cardd is full annd picturrees can not bbee recordedd or copieedd. Delete pictures or insert a

memory cardd with moore freee space.

bMEMORY FULL

• Memoryy card erroorr oorr ccoonnnneeccttiioonn erroorr: Reinsert the card or turn the camera off and then

on again. If the message persists, contact a FUJIFILM dealer.

WRITE ERROR

• Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert

a memory cardd with moore freee space.

• Thhee memory cardd iiss nnoot formatted: Format the memory card (P73).

• Thhee ffiile is corrupt or was not crreated with the camera: The file can nnot be viiewed.

• Thhee memory cardd contacts reeqquiree cclleeaanniing: Clean the contacts with a softt,, ddrryy ccllootthh.. IIff

the message is repeated, format the card (P73). If the message persists, replace tthhee ccard.

• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.

READ ERROR

Troubleshooting

Warning Messages and Displays

Warning

Description

The camerra has run out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee

memory cardd and selleect RENEW for BFRAME NO.. TTake a piccture to rreset frrame num-

bering to 100-0001, then select CONTINUOUS for BFRRAME NO. (P74).

FRAME NO. FULL

PRESS AND HOLD

THE DISP BUUTTON TO

DEACTIVATE SILENT MODE

An attempt was made to choose a flash mode or adjust the volume with the cameera in ssilent

mode. Exit silent mode before choosing a flash mode or adjusting the volume (P72).

A searrch hass retuurrned moore 5,0000 ressults, or moorre thann 999 ffrraammeess wweerree sseelleecctteedd fforr delettion.

Perform aa different search or select ffewer pictures.

An attempt was made to delete or rotate to a protected picture. Remove protection and try

TOO MANY FRAMES

PROTECTED FRAME

again (P68).

aCAN NOT CROP

apictures can nott be croopped.

CAN NOT CROP

The picture is damaged or was not createedd wwiitthh tthhee ccamera.

An attempt was made to create a resized copy at a size equal to or larger than the original.

Choose a smaller size.

aCANNOT EXECUTE

CAN NOT ROTATE

An attempt was made to rotate a picture that can nnot be rotated.

FCAN NOT ROTATE Movies can not be rotated.

mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.

FCANNOT EXECUTE Red-eye removal can not be applied to movies.

Troubleshooting

Warning Messages and Displays

Description

Warning

NO CARD

INSERT A NEEW CARD

Noo mmeemmoorryy ccard inserted; innsseerrtt aa mmeemmoorryy ccard.

NO CARD

DPOF FILE ERROR

CAN NOT SET DPOF

The DPOF print order on the currrent meemmory caarrdd contaiins more tthan 9999 iimages.

The picture caan not be pprintedd uusing DPOF.

FCAN NOT SET DPOF Movies can not be printed using DPOF.

A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other

device. Confirm that the device is turned on and that the USB caable iss conneected.

Printeer out oof papeer oorr iinnkk,, oorr ootthheerr pprriinntteerr eerrrroorr.. CChheecckk pprriinntteerr ((sseeee pprriinntteerr mmaannuuaall ffoorr ddeettaaiillss))..

To resume printing, turn the printer off and then turn it back on.

COMMUNICATION ERROR

PRINTER ERROR

RESUME?

Printer out of paper or ink, or ootthheerr pprriinntteerr eerrrroorr.. Check printer (see printer manual for details). If

printing does not resume automatically, press MENU/OK to resume.

An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa

format not ssuuppppoorrtteedd bbyy tthhee pprriinntteerr.. MMoovviieess aanndd ssoommee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess ccan

CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall

to connfirm tthat tthhe priinnter supporrts thhee JJFFIIFF--JJPPEEGG oorr EExxiiff-JPEEG format. If it does not, thhe piccttures

can not be pprinted.

Troubleshooting

Appendix

Tips and Tricks

The following tips and tricks will help you get the most from your camera.

Battery Performance

Choose the following settings for improved battery performance:

• bFACE DETECTION (P32): OFF

• FAF MODE (P64): r CENTER

• ELCD MODE (P75): UPOWER SAVE ON

Thhee SSeellff-timer

• To prevent blur caused by the camera moving when the shutter button is pressed,

use the two-second timer.

• To turn the timer off, press DISP/BACK.

Tips and Tricks

Intelligent Face Detection

When ON is selected for bFACE DETECTION (P32), you can:

• Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-

AGE DISP. (P73).

Shooting

• Remove red-eye by selecting ON for BRED-EYE REMOVAL (P67).

• Zoom in on faces during slide shows (P67) or by pressing the selector

down during playback.

Playback

• Search for faces using bIMAGE SEARCH (P41).

• Crop the background from portraits using GCROP (P68).

• Print one copy for each person in the photo.

Printing

Appendix

Tips and Tricks

Proo TTips

• To photograph backlit subjects, select CNATURAL & Nfor

shooting mode (P20) and position your subject in the cen-

ter of the frame.

• To photograph subjects that are in motion, select xTRACK-

ING for FAF MODE (P64).

• To photograph night scenes, raise sensitivity (

60) and turn

the flash on (P29).

Appendix

Meemory Carrd Caappacityy

The following table shows the recording time or number of pictures available

at different image sizes. All figures are approximate; file size varies with the

scene recorded, producing wide variations in the number of files that can be

stored. The number of exposures or length remaining may not diminish at an

even rate.

Medium

2 GB

4 GB

8 GB

FINE

270

310

360

530

700

1150

1680

NORMAL

540

610

FINE

550

620

NORMAL

1090

1220

1430

2060

2690

4290

6080

FINE

NORMAL

2180

2440

2870

4120

5380

8580

12160

O4:3

O3:2

O16:9

P4:3

P16:9

Q4:3

Q16:9

h1280^†

1110

1240

1470

2130

2810

4600

6720

710

730

1030

1340

2140

3040

1060

1400

2300

3360

9min.

18min.

55min.

116min.

37min.

111min.

233min.

27min.

58min.

* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are

available, the camera will show the time remaining for a movie 2GB in size.

†Use a G card or better when shooting HD movies.

Appendix

Specificaattiioons

System

Model

Effective pixels

CCD

Digital Camera FinePix T300/T200/T190 Series

14 million

1 2.3-in., square-pixel CCD with primary color filter

Storage media

File system

SD/SDHC memory cards

Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order

Format (DPOF)

File format

• Still pictures: Exif 2.3 JPEG (compressed) • Movies: AVI-format Motion JPEG

Image size (pixels)

• O4 : 3: 4,288 × 3,216

• P4 : 3: 3,072 × 2,304

• Q4 : 3: 2,048 × 1,536

• O3 : 2: 4,288 × 2,864

• O16 : 9: 4,288 × 2,416

• P16 : 9: 3,072 × 1,728

• Q16 : 9: 1,920 × 1,080

Leens

Fujinon 10 × opticall zoom llens,, F3.4 (wide angle) – F5.6 (telephoto)

f=5.0 mm–50.0 mm (35-mm format equivalent: 28 mm–280 mm)

Approx. 6.7 × (up tto 67 ×× wwhen coombinned wiitth optiical zoom)

F3.4/F8.4 (wide angle), F5.6/F14.0 (telephoto); uses Neutral Density (ND) filter

Apppprrooxx.. 4455 ccmm ((11..55 fft.)–infinittyy (wide angle); 2.0 m (6.6 ft.)–infinity (telephoto)

Focal length

Digital zoom

Aperture

Focus range

(distance from front of lens) • Maaccrro: approx. 5 ccmm––22..55 mm//00..22 fftt..––88..22 fftt.. (wide angle); 90 cm––22..55 mm//33..00 fftt..––88..22 fftt.. (telephoto)

Sensitivity

Sttaannddaarrdd oouuttput sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 32000 (imagge size Q);

AUTO

Metering

256-segment through-the-lens (TTL) metering

Exposurre control

Programmed AE

Exposure compensation –2 EV – +2 EV in increments of 13EV

Picture stabilization

Shutter speed

(combined mechaniccal and • Other modes: 8 s–1 2,000s

Optical sstabilization, CCCCDD sshhiifft

• Auto mode: 1 4s–1 2,000s

electronic shutter)

Coonnttinuous

Up to 1.2 fps; max. 3 frames

Appendix

Specifications

System

Focus

• Mode: Singgle AF, ccontinuuous AF

• Autofoocus syystem: Contrast-detect TTL AF

• Focus--area selection: CENTER , TRACKING

White balance

Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluores-

cent, warm white fluorescent, cool whiittee fflluuoorreesscceenntt,, aanndd iinnccandescent

Self-timer

Flash

Off, 10 sec., 2 sec.

CCD-metered auto flash control; effective range when sensitivity is set to AUTOO is approx.

50 cm–22..66 mm//11..66 fftt..––88..55 fftt.. (wide angle), 90 cm––11..77 mm//33..00 fftt..––55..66 fftt.. (telephoto)

Flash mode

LCD monitor

Auto, fill flash, off, slow syncc (red--eyee rremooval off)); auto with red-eye removal,, fill flash wwith red-

eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)

FinePix T300 series

3.0-in., 230k-dot color LCD monitor; frame coverage approx. 96%

FinePix T200/T190 series

2.7-in., 230k-dot color LCD monitor; frame coverage approx. 96%

Movies

Frame size 1,280 × 720, 640 × 480, 320 × 240; 30 fpss; monaural sound

Languages

Arabic, Buulgarriian, Siimmpplliiffiieedd CChinesse, Trraaditiioonaall Chinesse, Czzeech, Daanishh, Duttcch, English, Farsi,

Finnish, French, Geerman, Greeek, Hebrew, Hunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,

Korean, LLatvian, Lithuanian, Noorrwweeggiiaann,, PPoolliisshh,, PPoorrttuugguueessee,, RRoommanian, Russian, Serbian,

Slovak,, Sppaanniisshh,, SSwweeddiisshh,, TThhaaii,, TTuurrkkish, Ukkrainian, Vietnamese

Input/output terminals

A/V OUT (aaudio//videeoo oouuttppuutt)) NTSC or PAL output with monaural sound

Digital input/output

USB 2.0 High-Speeed; sharees A/V OUT cconnector; MTP/PTP

Appendix

Specifications

Power supply/other

Power suppplly

NP-45A rechargeable battery

Battery life (approximate

numberr of fraames thhaatt ccan

be takeen withh a fullly-charged

battery)

Battery type

NP-45A (type supplied with cammera)

Approoximate number of frames

180

CIPA standdard, meeaasured inn B (auto) mode using battery supplied with caamera andd SD mem-

ory card.

Notte: NNumberr of shhoots thhaat caann bbee ttaakkeenn wwiitthh bbaatttteerryy vvaarriieess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll

decline at low temperatures.

Caammeerra dimmensions

(W × H × D)

97.0 mm × 56.5 mm × 28.1 mm/3.8 in. × 2.2 in. ×× 1.1 in.

excluding projections (minimum depth 18.5 mm/0.7 in.)

Caammera wweight

FinePix T300 series

Approx. 140 g/4.9 oz., excluding battery, accessories, and memory card

FinePix T200/T190 series

Approx. 134 g/4.7 oz., excluding battery, accessories, and memory card

Shooting weight

Operating conditions

FinePix T300 series

Approx. 157 g/5.5 oz., including battery and memory card

FinePix T200/T190 series

Approx. 151 g/5.3 oz., including battery and memory card

• Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F

• Humidityy: 10 % – 8800 % (no condensation)

Appendix

Specifications

NP-45A rechargeable battery

Noommiinnal voltage

Noommiinnaall ccaappaacciitty

DC 3.7V

720 mAh

Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.

Weight

Approx. 15.5 g/0.5 oz.

BC-45C battery charger

Rated input

Input capacitty

100V–240V AC,, 5500//6600 HHz

• 100 V: 8.0VA

• 240 V: 12VA

Rated output

4.2V DC, 550 mA

Supported batteries

Charging time

NP-45A rechargeable batteries

Approx. 110 minutes (+20 °C/+68 °F)

Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F

Dimensions (W × H × D) 46.2 mm × 90.0 mm × 27.6 mm/1.8 in. × 3.5 in. × 1.0 in., excluding projections

Weight Approx. 63 g/2.2 oz., excluding battery

Weight and dimensions may vary with the country or region of sale.

Appendix

Specifications

■ Noottiices

• Specifications subject to change without notice. FUJIFILM shall not be held liable for

damages resulting from errors in this manual.

• Although the LCD monitor is manufactured using advanced high-precision technol-

ogy, small bright points and anomalous colors may appear, particularly in the vicinity

of text. This is normal for this type of LCD monitor and does not indicate a malfunc-

tion; images recorded with the camera are unaffected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g.,

electric fields, static electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images.

This is normal.

100

Appendix

Meemo

101

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/products/digital_cameras/index.html

Restrictions on Camera Settings

The options available in each shooting mode are listed below.

Shooting Mode

Option

Q B P CD L Y K M

r N O

✔¹✔

P Q

S U V

✔ ✔ ✔¹

✔ ✔ ✔

✔

AUTO

✔ ✔ ✔

✔ ✔ ✔ ✔¹

✔

BOFF

✔ ✔

✔ ✔ ✔ ✔¹✔ ✔ ✔

✔ ✔ ✔¹

✔ ✔ ✔

✔ ✔ ✔ ✔¹

✔

✔¹✔ ✔¹✔ ✔¹

✔¹✔

✔

✔ ✔ ✔

BON

✔ ✔

✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔²✔ ✔ ✔ ✔

✔²✔ ✔ ✔ ✔ ✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔¹✔¹

✔

✔¹✔¹✔ ✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

AUTO

3200

1600

800

400

200

✔

100

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔³✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

h1280

✔

Restrictions on Camera Settings

Shooting Mode

Q B P CD L Y K M N O

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

Option

P Q

S U V

W F

FINE

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

NORMAL

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔

OFF

✔ ✔ ✔

✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔¹✔ ✔ ✔ ✔ ✔ ✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔¹✔ ✔ ✔ ✔ ✔ ✔ ✔¹

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔¹✔¹✔¹✔¹

✔ ✔

✔ ✔ ✔ ✔

✔¹✔¹✔¹✔ ✔ ✔¹✔ ✔ ✔ ✔ ✔¹✔¹

✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹✔¹

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔

✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔

✔

✔ ✔

✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

1 Automatically optimized for selected shooting mode.

2 The camera automatically analyzes and selects macro mode ON/OFF.

3 Aspect ratio ﬁxed at 4 : 3.

Alpine TDM 7582 User Manual
ATN Multi Purpose Night Vision NVM14 3 User Manual
Crown Boiler CWI Series User Manual
Dual Electronics Corporation Car Amplifier DPA250 User Manual
FOCUS Enhancements FS 2E User Manual
Haier HBCN05FVS User Manual
Haier HVCE15A User Manual
Hitachi DZ BX35A User Manual
Jensen JMD200 User Manual
JVC Car Stereo System KD R820BT User Manual