FujiFilm 16124937 User Manual
BL01299-201  
EN  
DIGITAL CAMERA  
Before You Begin  
First Steps  
FINEPIX XP20 Series  
Basic Photography and Playback  
More on Photography  
More on Playback  
Movies  
Owner’s Manual  
Thank you for your purchase  
of this product. This manual  
describes how to use your  
FUJIFILM digital camera and the  
supplied software. Be sure that  
you have read and understood  
its contents and the warnings in  
“ForYour Safety”(Pii) before us-  
ing the camera.  
Connections  
Menus  
For information on related products, visit our website at  
http://www.fujifilm.com/products/digital_cameras/index.html  
Technical Notes  
Troubleshooting  
Appendix  
For Your Safety  
If the video product does not operate nor-  
mally follow the operating instructions. Ad-  
just only those controls that are covered by  
the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the video  
product to its normal operation.  
Antennas  
Use  
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the  
antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-  
video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp  
system is grounded so as to provide some cloth for cleaning.  
protection against voltage surges and built-  
up static charges. Section 810 of the National  
Object and Liquid Entry: Never push objects  
of any kind into this video product through  
Electrical Code, ANSI/NFPA No. 70, provides  
openings as they may touch dangerous volt-  
information with respect to proper ground-  
age points or short out parts that could result  
When the video product exhibits a distinct  
ing of the mast and supporting structure,  
in a fire or electric shock. Never spill liquid  
change in performance—this indicates  
need for service.  
a
grounding of the lead-in wire to an antenna  
of any kind on the video product (excluding  
discharge unit, size of grounding conductors,  
waterproof products).  
Replacement Parts: When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteris-  
tics as the original part. Unauthorized sub-  
stitutions may result in fire, electric shock or  
other hazards.  
location of antenna discharge unit, connec-  
Lightning: For added protection for this video  
product receiver during a lightning storm, or  
when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet  
and disconnect the antenna or cable system.  
This will prevent damage to the video product  
due to lightning and power-line surges.  
tion to grounding electrodes, and require-  
ments for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
Ground Clamp  
Antenna Lead  
in Wire  
Safety Check: Upon completion of any service  
or repairs to this video product, ask the ser-  
vice technician to perform safety checks to  
determine that the video product is in proper  
operating condition.  
Service  
Antenna  
Electric Service  
Equipment  
Servicing: Do not attempt to service this video  
product yourself as opening or removing cov-  
ers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified  
service personnel.  
Discharge Unit  
(NEC SECTION  
810-20)  
Ground Clamps  
Grounding  
Conductors  
(NEC SECTION  
810-21)  
Damage Requiring Service: Unplug this video  
product from the wall outlet and refer servic-  
ing to qualified service personnel under the  
following conditions:  
Power Service Grounding  
Electrode System (NEC ART  
250. PART H)  
Power Lines: An outside antenna system • When the power-supply cord or plug is  
should not be located in the vicinity of over-  
damaged.  
head power lines or other electric light or • If liquid has been spilled, or objects have  
power circuits, or where it can fall into such  
fallen into the video product.  
power lines or circuits. When installing an • If the video product has been exposed to  
outside antenna system, extreme care should  
be taken to keep from touching such power  
rain or water (excluding waterproof prod-  
ucts).  
lines or circuits as contact with them might • If the video product has been dropped or  
be fatal.  
the cabinet has been damaged.  
iii  
For Your Safety  
Be sure to read these notes before use  
WARNING  
Safety Notes  
Do not use the camera in the bathroom or shower (excluding water-  
proof products). This can cause a fire or electric shock.  
• Make sure that you use your camera correctly. Read these safety  
notes and your Owner’s Manual carefully before use.  
Do not use in  
the bathroom or  
shower  
• After reading these safety notes, store them in a safe place.  
Never attempt to change or take apart the camera (never open  
the case). Failure to observe this precaution can cause fire or  
electric shock.  
About the Icons  
The icons shown below are used in this document to indicate the  
severity of the injury or damage that can result if the information  
indicated by the icon is ignored and the product is used incorrectly  
as a result.  
Do not  
disassemble  
Should the case break open as the result of a fall or other accident,  
do not touch the exposed parts. Failure to observe this precau-  
tion could result in electric shock or in injury from touching the  
damaged parts. Remove the battery immediately, taking care  
to avoid injury or electric shock, and take the product to the  
point of purchase for consultation.  
Do not touch  
internal parts  
This icon indicates that death or serious injury can result if the  
information is ignored.  
WARNING  
Do not change, heat or unduly twist or pull the connection cord and  
do not place heavy objects on the connection cord. These actions  
could damage the cord and cause a fire or electric shock. If the  
cord is damaged, contact your FUJIFILM dealer.  
This icon indicates that personal injury or material damage can  
result if the information is ignored.  
CAUTION  
The icons shown below are used to indicate the nature of the instruc-  
tions which are to be observed.  
Do not place the camera on an unstable surface. This can cause the  
camera to fall or tip over and cause injury.  
Never attempt to take pictures while in motion. Do not use the  
camera while you are walking or driving a vehicle. This can re-  
sult in you falling down or being involved in a traffic accident.  
Triangular icons tell you that this information requires atten-  
tion (“Important”).  
Circular icons with a diagonal bar tell you that the action indi-  
cated is prohibited (“Prohibited”).  
Do not touch any metal parts of the camera during a thunderstorm.  
This can cause an electric shock due to induced current from  
the lightning discharge.  
Filled circles with an exclamation mark indicate an action that  
must be performed (“Required”).  
Do not use the battery except as specified. Load the battery as  
shown by the indicator.  
WARNING  
Do not heat, change or take apart the battery. Do not drop or subject  
the battery to impacts. Do not store the battery with metallic prod-  
ucts. Any of these actions can cause the battery to burst or leak  
and cause fire or injury as a result.  
If a problem arises, turn the camera off, remove the battery, and  
disconnect and unplug the AC power adapter. Continued use of  
the camera when it is emitting smoke, is emitting any unusual  
Unplug from  
power socket  
odor, or is in any other abnormal state can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
Use only the battery or AC power adapters specified for use with this  
camera. Do not use voltages other than the power supply voltage  
shown. The use of other power sources can cause a fire.  
If the battery leaks and fluid gets in contact with your eyes, skin or  
clothing, flush the affected area with clean water and seek medical  
attention or call an emergency number right away.  
Do not allow water or foreign objects to enter the camera. If water  
or foreign objects get inside the camera, turn the camera off,  
remove the battery, and disconnect and unplug the AC power  
adapter. Continued use of the camera can cause a fire or elec-  
tric shock. Contact your FUJIFILM dealer.  
iv  
For Your Safety  
WARNING  
CAUTION  
Do not use the charger to charge batteries other than those speci-  
fied here. The supplied battery charger is for use only with the  
type of battery supplied with the camera. Using the charger to  
charge conventional batteries or other types of rechargeable  
batteries can cause the battery to leak fluid, overheat or burst.  
Do not cover or wrap the camera or the AC power adapter in a cloth  
or blanket. This can cause heat to build up and distort the cas-  
ing or cause a fire.  
When you are cleaning the camera or you do not plan to use the  
camera for an extended period, remove the battery and disconnect  
and unplug the AC power adapter. Failure to do so can cause a  
fire or electric shock.  
When carrying the battery, install it in a digital camera or keep it  
in the hard case. When storing the battery, keep it in the hard case.  
When discarding, cover the battery terminals with insulation tape.  
Contact with other metallic objects or batteries could cause  
the battery to ignite or burst.  
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can cause  
a fire.  
Unplug from  
power socket  
Keep memory cards out of the reach of small children. Because  
memory cards are small, they can be swallowed by children.  
Be sure to store memory cards out of the reach of small chil-  
dren. If a child swallows a memory card, seek medical atten-  
tion or call an emergency number.  
Using a flash too close to a person’s eyes may temporarily affect the  
eyesight. Take particular care when photographing infants and  
young children.  
When a memory card is removed, the card could come out of the slot  
too quickly. Use your finger to hold it and gently release the card.  
Injury could result to those struck by the ejected card.  
CAUTION  
Request regular internal testing and cleaning for your camera.  
Build-up of dust in your camera can cause a fire or electric  
shock. Contact your FUJIFILM dealer to request internal clean-  
ing every two years. Please note that this service is not free  
of charge.  
Do not use this camera in locations affected by oil fumes or steams.  
This can cause a fire or electric shock.  
Do not use this camera in locations affected by humidity or dust  
(excluding waterproof products). This can cause a fire or elec-  
tric shock.  
Do not leave this camera in places subject to extremely high temper-  
atures. Do not leave the camera in locations such as a sealed  
vehicle or in direct sunlight. This can cause a fire.  
Keep out of the reach of small children. This product could cause  
injury in the hands of a child.  
Do not place heavy objects on the camera. This can cause the  
heavy object to tip over or fall and cause injury.  
Do not move the camera while the AC power adapter is still connect-  
ed. Do not pull on the connection cord to disconnect the AC power  
adapter. This can damage the power cord or cables and cause  
a fire or electric shock.  
Do not use the AC power adapter when the plug is damaged or the  
plug socket connection is loose. This could cause a fire or electric  
shock.  
v
For Your Safety  
■ Charging the Battery  
■ Cautions: Handling the Battery  
The Battery and Power Supply  
Charge the battery in the supplied battery • Do not transport or store with metal objects  
charger. Charging times will increase at am-  
bient temperatures below +10 °C (+50 °F) or • Do not expose to flame or heat.  
above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.  
charge the battery at temperatures above • Use with designated chargers only.  
40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical  
Note: Check the type of battery used in  
your camera and read the appropriate  
sections.  
such as necklaces or hairpins.  
The following describes the proper use of  
batteries and how to prolong their life. Incor-  
rect use can shorten battery life or cause leak-  
age, overheating, fire, or explosion.  
(+32 °F), the battery will not charge.  
shocks.  
• Do not expose to water.  
• Keep the terminals clean.  
• The battery and camera body may become  
warm to the touch after extended use. This  
is normal.  
Do not attempt to recharge a fully charged  
battery. The battery does not however need  
to be fully discharged before charging.  
Li-ion Batteries  
Read this section if your camera uses a  
rechargeable Li-ion battery.  
The battery may be warm to the touch imme-  
diately after charging or use. This is normal.  
The battery is not charged at shipment.  
Charge the battery before use. Keep the bat-  
tery in its case when not in use.  
AA Alkalline/Rechargeable NiMH Batteries  
Read this section if your camera uses AA  
alkaline or rechargeable AA NiMH bat-  
teries. Information on compatible battery  
types may be found elsewhere in the camera  
manual.  
■ Battery Life  
At normal temperatures, the battery can be  
recharged about 300 times. A noticeable de-  
crease in the length of time the battery will  
hold a charge indicates that it has reached  
the end of its service life and should be re-  
placed.  
■ Notes on the Battery  
The battery gradually loses its charge when  
not in use. Charge the battery one or two  
days before use.  
■ Cautions: Handling the Batteries  
• Do not expose to water, flame, or heat, or  
store in warm or humid conditions.  
• Do not transport or store with metal objects  
such as necklaces or hairpins.  
• Do not disassemble or modify the batteries  
or battery casing.  
• Do not subject to strong physical shocks.  
• Do not use batteries that are leaking, de-  
formed, or discolored.  
Battery life can be extended by turning the  
camera off when not in use.  
■ Storage  
Performance may be impaired if the battery is  
left unused for extended periods when fully  
charged. Run the battery flat before storing it.  
Battery capacity decreases at low tempera-  
tures; a depleted battery may not function at  
when cold. Keep a fully charged spare bat-  
tery in a warm place and exchange as nec-  
essary, or keep the battery in your pocket or  
other warm place and insert it in the camera  
only when shooting. Do not place the bat-  
tery in direct contact with hand warmers or  
other heating devices.  
If the camera will not be used for an extended  
period, remove the battery and store it in a  
dry place with an ambient temperature of  
from +15 °C to +25 °C (+59 °F to +77 °F). Do  
not store in locations exposed to extremes of  
temperature.  
• Keep out of reach of infants and small chil-  
dren.  
• Insert in the correct orientation.  
vi  
For Your Safety  
• Do not mix old and new batteries, batteries ■ NiMH Batteries  
with different charge levels, or batteries of The capacity of Ni-MH batteries may be  
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)  
This section applies to all camera models.  
Use only FUJIFILM AC power adapters desig-  
nated for use with this camera. Other adapt-  
ers could damage the camera.  
different types.  
temporarily reduced when new, after long  
• If the camera will not be used for an extend- periods of disuse, or if they are repeatedly  
ed period, remove the batteries. Note that recharged before being fully discharged. This  
the camera clock will be reset.  
is normal and does not indicate a malfunc-  
• The AC power adapter is for indoor use only.  
• Be sure the DC plug is securely connected  
to the camera.  
• Turn the camera off before disconnecting  
the adapter. Disconnect the adapter by the  
plug, not the cable.  
• The batteries may be warm to the touch tion. Capacity can be increased by repeatedly  
immediately after use. Turn the camera discharging the batteries using the discharge  
off and allow the batteries to cool before option in the camera setup menu and re-  
handling.  
charging them using a battery charger.  
• Battery capacity tends to decrease at low  
temperatures. Keep spare batteries in  
Q
CAUTION: Do not use the discharge option  
a
• Do not use with other devices.  
• Do not disassemble.  
with alkaline batteries.  
pocket or other warm place and exchange  
as necessary. Cold batteries may recover  
some of their charge when warmed.  
• Fingerprints and other stains on the battery  
terminals can impair battery performance.  
Thoroughly clean the terminals with  
soft, dry cloth before inserting them in the  
camera.  
The camera draws a small amount of current  
even when off. Ni-MH batteries that have  
been left in the camera for an extended pe-  
riod may be drawn down to the point that  
they no longer hold a charge. Battery perfor-  
mance may also drop if the batteries are run  
down in a device such as a flashlight. Use the  
discharge option in the camera setup menu  
to discharge Ni-MH batteries. Batteries that  
no longer hold a charge even after repeat-  
edly being discharged and recharged have  
reached the end of their service life and must  
be replaced.  
• Do not expose to high heat and humidity.  
• Do not subject to strong physical shocks.  
• The adapter may hum or become hot to the  
touch during use. This is normal.  
• If the adapter causes radio interference,  
reorient or relocate the receiving antenna.  
a
If the batteries leak, clean the battery  
compartment thoroughly before in-  
serting new batteries.  
If fluid from the battery comes into  
contact with skin or clothing, flush  
the affected area with water. If fluid  
enters your eyes, immediately flush the  
affected area with water and seek  
medical attention. Do not rub your eyes.  
Failure to observe this precaution could  
result in permanent visual impairment.  
Ni-MH batteries can be recharged in a bat-  
tery charger (sold separately). Batteries may  
become warm to the touch after charging.  
Refer to the instructions provided with the  
charger for more information. Use the char-  
ger with compatible batteries only.  
Ni-MH batteries gradually lose their charge  
when not in use.  
■ Disposal  
Dispose of used batteries in accord with local  
regulations.  
vii  
For Your Safety  
Liquid CCrystal  
Electrical Innterference  
Using the Camera  
In the event that the LCD monitor is dam-  
aged, care should be taken to avoid contact  
with liquid crystal. Take the urgent action  
indicated should any of the following situa-  
tions arise:  
This camera may interfere with hospital or  
aviation equipment. Consult with hospital  
or airline staff before using the camera in a  
hospital or on an aircraft.  
Do not aim the camera at extremely bright  
light sources, such as the sun in a cloudless  
sky. Failure to observe this precaution could  
damage the camera image sensor.  
Color Television Systems  
Take Test Shots  
•
•
•
If liquid crystal comes in contact with your skin,  
clean the area with a cloth and then wash  
thoroughly with soap and running water.  
If liquid crystal enters your eyes, flush the af-  
fected eye with clean water for at least 15  
minutes and then seek medical assistance.  
If liquid crystal is swallowed, rinse your  
mouth thoroughly with water. Drink large  
quantities of water and induce vomiting,  
then seek medical assistance.  
NTSC (National Television System Committee)  
is a color television telecasting specification  
adopted mainly in the U.S.A., Canada, and  
Japan. PAL (Phases Alternation by Line) is  
a color television system adopted mainly in  
European countries and China.  
Before taking photographs on important  
occasions (such as at weddings or before  
taking the camera on a trip), take a test shot  
and view the result in the LCD monitor to en-  
sure that the camera is functioning normally.  
FUJIFILM Corporation can not accept liability  
for damages or lost profits incurred as a result  
of product malfunction.  
Exif Print (Exif Version 2.3)  
Exif Print is a newly revised digital camera file  
format in which information stored with pho-  
tographs is used for optimal color reproduc-  
tion during printing.  
Notes on Copyright  
Unless intended solely for personal use, imag-  
es recorded using your digital camera system  
cannot be used in ways that infringe copy-  
right laws without the consent of the owner.  
Note that some restrictions apply to the  
photographing of stage performances, enter-  
tainments, and exhibits, even when intended  
purely for personal use. Users are also asked  
to note that the transfer of memory cards  
containing images or data protected under  
copyright laws is only permissible within the  
restrictions imposed by those copyright laws.  
Although the display is manufactured using  
extremely high-precision technology, it may  
contain pixels that are always lit or that do not  
light. This is not a malfunction, and images re-  
corded with the product are unaffected.  
IMPORTANT NOTICE:  
Read Before Using the Software  
Direct or indirect export, in whole or in part,  
of licensed software without the permission  
of the applicable governing bodies is pro-  
hibited.  
Trademarkk Information  
xD-Picture Card and E are trademarks  
of FUJIFILM Corporation. The typefaces in-  
cluded herein are solely developed by Dyna-  
Comware Taiwan Inc. Macintosh, QuickTime,  
and Mac OS are trademarks of Apple Inc. in  
the U.S.A. and other countries. Windows 7,  
Windows Vista, and the Windows logo are  
trademarks of the Microsoft group of com-  
panies. Adobe and Adobe Reader are either  
trademarks or registered trademarks of Ado-  
be Systems Incorporated in the U.S.A. and/  
or other countries. The SDHC and SDXC logos  
are trademarks of SD-3C, LLC. The HDMI logo  
is a trademark. YouTube is a trademark of  
Google Inc. All other trade names mentioned  
in this manual are the trademarks or regis-  
tered trademarks of their respective owners.  
Haandling  
To ensure that images are recorded correctly,  
do not subject the camera to impact or physi-  
cal shocks while images are being recorded.  
viii  
About This Manual  
Before using the camera, read this manual and the warnings in“For Your Safe-  
ty”(Pii). For information on specific topics, consult the sources below.  
Table of Contents ...........................Pxiii Troubleshooting ............................ P88  
The “Table of Contents” gives an Having a specific problem with the  
overview of the entire manual. The camera? Find the answer here.  
principal camera operations are list-  
ed here.  
Warning MMessaggeess aanndd Displays ..... P94  
Find out what’s behind that flashing  
icon or error message in the display.  
Memoryy Caarrds  
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and  
SDXC memory cards (P14), referred to in this manual as“memory cards.”  
ix  
Frequeently--Usseedd BBuuttttons  
■ Deletingg Pictures  
■ Takiinngg PPictureess DDuurriinngg Playback  
y Press the selector up (b) to display  
deletion options.  
y To return instantly to shooting mode,  
press the shutter button halfway.  
Shoot  
View  
■ Turning the Cammera on in  
Playback Mode  
y When the camera is  
off, playback can be  
started by pressing the  
abutton for about a  
second.  
■ Silent Mode  
y Press and hold the DISP/  
BACK button to disable  
camera lights and  
sounds.  
x
Prodduct Feeatures and Precaauutionns for Use  
■ Water, DDust, annd Shockk Resistance  
Q Thhee ccaammeerraa ccoommpplliieess wwiitthh JJIISS Class 8 water resistance and JIS Class 6 (IP68) dust resistance  
standards, and hhas paasssed FUUJIFIILM drroop testts (ddrroopp hheeiigghhtt:: 11..55 mm//44..99 fftt..;; iimmppaacctt ssuurrffaaccee:: ppllyy--  
wood, thicknness 55 cm/2..0 in..) comppliant withh MIL--STD 88110F Metthod 5516.5:: Shocck. These results  
were obtained through inn-houssee testiinng and are not a blanket guarantee of water resistance  
or invulnerability to damage or destruction. Thhee aacccceessssoorriieess ssuupppplliieedd wwiitthh tthhee ccaammeerraa aarree nnoott  
water resistant.  
■ Before Use  
Q Thhee ffrroonnt surface of the camera lens iis proteccted by a sheet of glass. Foreign mattter on the  
glass will appear in photographs; keep the glass clean at all times.  
Q Be sure thhat thhe batttery-chhaammbbeerr aanndd coonnnneeccttoorr ccoovers are fully latched. Thhee pprreesseennccee ooff wwaa--  
ter, mud, or sand in the camera could cause malfunction.  
Q Do not opeen or cclose tthe batterry-chambeerr oorr ccoonnnneeccttoorr ccoover witth wet hands or near water,  
for exammple whille on or bby a body of water.  
Q Be ssuurree tthhee ccaammeerraa iiss ccoommpplleetteellyy ddrryy bbeeffoorree iinnsseerrttiinngg oorr rreemmooviing battteriees or meemory cards  
or connecting the USB or A/V cable.  
Q Thhee ccaammeerraa ddooeess nnoott flflooaatt.. BBe sure ttoo aattttaacchh tthhee ssttrraapp aanndd kkeeeepp iitt aarroouunndd yyoouurr wwrriisstt wwhheenn  
using the camera.  
■ During Use  
Q Reessttrriicctt uunnddeerrwwaatteerr uuse to ddepths of 55m (16 ft.)) or less annd periods shorter than 120 minutes.  
Q Do not oopen orr cclose thhe batteery-chaambeerr ccoover while under water.  
Q Do not use in hot springs or heated pools.  
Q Do not dive into water with the camera or otherwise subject it to excessive force.  
Q If thee cameerra is left onn the ssand,, iittss tteemmppeerraattuurree maay eexxcceeeedd opperattiing lliimmiittss aanndd sannd may  
get into the speaker or microphone.  
Q Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should  
be removveedd wwith a damp cloth.  
Q Thhee ccaammeerraa mmaayy lloossee wwaatteerr rreessiissttaannccee iiff ssuubbjjeecctteedd ttoo eexxcceessssiivvee ffoorrccee oorr vviibbrraattiioonn.. CCoonnssuulltt yyoouurr  
retailer or a FUJIFILM-authorized repair technician.  
xi  
Product Features and Precautions for Use  
■ Affter Use  
Q Reemmoove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat-  
ter could ddamagge the sseal,, lowering water resistance.  
Q Afftteerr uusing the camera underwater or in loccations whhere ffoorreeiiggnn mmaatttteerr mmiigghhtt aaddhheerree ttoo tthhee  
camera body, rinse the camera under the tap or leave it in a basin of fresh water forr two to  
three minutes.  
Q Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should  
nevver bee used.  
Q Afftteerr use, removvee wwaatteerr ddrroopplets and foreign matter wwith aa ddrryy ccllootthh,, fifirrmmllyy llaattcchh tthhee bbaatttteerryy--  
chamber ccovveerr,, and soak the camera in frresh waterr for aboutt tteenn mmiinnuutteess.. DDrryy tthhee ccaammeerraa  
thoroughhly afterr removing it from the water.  
■ Storage and Maiintenancce  
Q Do not sstore att temperratures bbelow 0 °C (32 °F) or abovvee 4400 °°CC ((110044 °°FF))..  
Q To ensure continued water resistance, it is rreeccoommmmeennddeedd tthhaatt yyoouu hhaavvee tthhee wwaatteerr--rreessiissttaanntt  
seal replaced about once a year (a fee iiss cchhaarrggeedd ffoorr tthhiiss sseerrvviiccee)).. CCoonnttaacctt yyoouurr rreettaaiilleerr oorr aa  
FUJIFILM-authorized repair technician for more information.  
■ Coolldd Climates  
Q Battery pperformaance dropps at loww tteemmppeerraattuurrees, rreeducing the number of pictures that can be  
taken. Insulate the camera to keep it warm or place it in your clothing.  
Q Use an NP-45A battery.  
Q Displayy responnse may sslow at low temperatures. Thhiiss iiss nnoott aa mmaallffuunnccttiion.  
xii  
Table of Contents  
For Your Safety ..................................................................ii  
IMPORTANT SAFETY INSTRUCTIONS..................................ii  
Safety Notes....................................................................iv  
About This Manual ...........................................................ix  
Frequently-Used Buttons .................................................x  
Product Features and Precautions for Use......................xi  
Basic Photography and Playback  
Taking Pictures in Q (Scene Recognition) Mode......19  
Viewing Pictures .............................................................23  
Moree oonn PPhotography  
Shooting Mode................................................................24  
Choosing a Shooting Mode ............................................24  
Shooting Mode Options .................................................25  
r MOTION PANORAMA..............................................27  
bIntelligent Face Detection.......................................29  
Focus Lock........................................................................30  
dExposure Compensation..........................................32  
FMacro Mode (Close-ups) ...........................................33  
NUsing the Flash (Intelligent Flash) ............................34  
hUsing the Self-Timer .................................................36  
Beforre You Begin  
Symbols and Conventions.................................................1  
Supplied Accessories.........................................................1  
Parts of the Camera ..........................................................2  
Camera Displays...............................................................4  
Shooting ........................................................................4  
Playback.........................................................................5  
First Steps  
Charging the Battery ........................................................7  
Inserting the Battery and a Memory Card.......................9  
Compatible Memory Cards .............................................14  
Turning the Camera on and Off ......................................16  
Shooting Mode ..............................................................16  
Playback Mode...............................................................16  
Basic Setup ......................................................................18  
xiii  
Table of Contents  
Moree oon Playback  
Coonnnneections  
Playback Options.............................................................37  
IFavorites: Rating Pictures .........................................37  
Playback Zoom...............................................................38  
Multi-Frame Playback....................................................39  
ADeleting Pictures......................................................40  
bImage Search............................................................41  
kPhotoBook Assist......................................................42  
Creating a PhotoBook.....................................................42  
Viewing Photobooks ......................................................43  
Editing and Deleting Photobooks...................................43  
Viewing Panoramas ........................................................44  
Viewing Pictures on TV ...................................................48  
Printing Pictures via USB................................................49  
Printing the DPOF Print Order.........................................51  
Viewing Pictures on a Computer....................................53  
Windows: Installing MyFinePix Studio ...........................53  
Macintosh: Installing FinePixViewer...............................55  
Connecting the Camera..................................................57  
Menus  
Using the Menus: Shooting Mode..................................60  
Using the Shooting Menu...............................................60  
Shooting Menu Options .................................................60  
ASHOOTING MODE....................................................60  
NISO........................................................................61  
OIMAGE SIZE............................................................62  
TIMAGE QUALITY .....................................................63  
PFINEPIX COLOR .......................................................63  
DWHITE BALANCE ....................................................64  
RCONTINUOUS .........................................................65  
bFACE DETECTION.....................................................65  
FAF MODE...............................................................66  
VMOVIE QUALITY .....................................................66  
qLED ILLUMINATOR...................................................66  
Movies  
Recording Movies............................................................45  
Viewing Movies ...............................................................47  
xiv  
Table of Contents  
Using the Menus: Playback Mode ..................................67  
Using the Playback Menu...............................................67  
Playback Menu Options..................................................67  
kPHOTOBOOK ASSIST................................................67  
bIMAGE SEARCH ......................................................67  
AERASE ...................................................................67  
NEDIT ......................................................................68  
jMARK FOR UPLOAD TO............................................69  
ISLIDE SHOW ..........................................................70  
BRED EYE REMOVAL .................................................71  
DPROTECT................................................................71  
GCROP.....................................................................72  
ORESIZE...................................................................72  
CIMAGE ROTATE .......................................................73  
ECOPY.....................................................................73  
STRANSITION ...........................................................74  
LMOVIE TRIMMING...................................................74  
MOVIE JOIN ..................................................................75  
KPRINT ORDER (DPOF) ..............................................75  
The Setup Menu ..............................................................76  
Using the Setup Menu....................................................76  
Setup Menu Options ......................................................77  
FDATE/TIME.............................................................77  
NTIME DIFFERENCE ...................................................77  
La ......................................................77  
oSILENT MODE.........................................................77  
RRESET....................................................................78  
KFORMAT ................................................................78  
AIMAGE DISP. ...........................................................78  
BFRAME NO. ............................................................79  
GOPERATION VOL......................................................80  
HSHUTTER VOLUME ..................................................80  
eSOUND..................................................................80  
IPLAYBACK VOLUME ................................................80  
JLCD BRIGHTNESS ....................................................80  
ELCD MODE .............................................................81  
MAUTO POWER OFF...................................................81  
LDUAL IS MODE .......................................................81  
BRED EYE REMOVAL .................................................81  
DDIGITAL ZOOM .......................................................82  
nSAVE ORG IMAGE....................................................82  
cGUIDANCE DISPLAY ................................................82  
QVIDEO SYSTEM .......................................................83  
xv  
Table of Contents  
Techniccaall NNotes  
Troubleshooting  
Optional Accessories .......................................................84  
Accessories from FUJIFILM..............................................85  
Caring for the Camera.....................................................86  
Storage and Use .............................................................86  
Cleaning.........................................................................87  
Traveling ........................................................................87  
Problems and Solutions..................................................88  
Warning Messages and Displays ....................................94  
Appendix  
Tips and Tricks..................................................................98  
Internal Memory/Memory Card Capacity....................101  
Specifications ................................................................102  
xvi  
Before You Begin  
Symbols andd Convventions  
The following symbols are used in this manual:  
Q : This information should be read before use to ensure correct operation.  
R : Additional information that may be helpful when using the camera.  
P: Other pages in this manual on which related information may be found.  
Menus and other text in the LCD monitor are shown in bold. In the illustra-  
tions in this manual, displays may be simplified for explanatory purposes.  
Supplied Accessories  
The following items are included with the camera:  
NP-45A rechargeable  
battery  
BC-45B battery charger  
USB cable  
CD-ROM (contains  
this manual)  
Attttaacchhiing the Strap  
Attach the strap as shown.  
• Strap  
• User Guide  
1
Parts of the Camera  
For more information, refer to the page listed to the right of each item.  
Selector button  
Move cursor up  
d(exposure compensation) button (P32)  
b(delete) button (Px)  
MENU/OK button  
Move cursor left  
F(macro) button (P33)  
Move cursor right  
N(flash) button (P34)  
Move cursor down  
h(self-timer) button (P36)  
2
Before You Begin  
Parts of the Camera  
1 Zoom control ...........................................................20, 38 12 Strap eyelet .................................................................... 1  
2 Shutter button.............................................................. 21 13 Battery-chamber cover latch .....................................9, 12  
3 ON/OFF button ............................................................. 16 14 Connector cover latch ........................................48, 49, 57  
4 Flash............................................................................. 34 15 DISP (display)/BACK button .....................................6, 18  
5 Self-timer lamp ............................................................ 36  
LED illuminator............................................................. 66 16 a(playback) button................................................... 23  
6 Lens/protective glass 17 Tripod mount  
o (silent mode) button* ................................................x  
7 Speaker......................................................................... 47 18 USB multi-connector ...............................................49, 57  
8 Microphone .................................................................. 45 19 Memory card slot.......................................................... 11  
9 LCD monitor.................................................................... 4 20 Battery latch............................................................10, 13  
10 t(movie recording) button........................................ 45 21 Battery chamber............................................................. 9  
11 Indicator lamp (see below)  
*Press and hold the DISP/BACK button until o is displayed.  
Thhee IInndicator Lamp  
The indicator lamp shows camera status as follows:  
Indicator lamp  
Glowwss ggrreen  
Blinks green  
Caammera sstatus  
Focus locked.  
Blur, focus, or exposure warning. Picture can be taken.  
Blinks green and orange Recording pictures. Additional pictures can be taken.  
Glowwss oorraannggee  
Blinks orange  
Blinks red  
Recording pictures. No additional pictures can be taken at this time.  
Flash charging; flash will not fire when picture is taken.  
Lens or memory error.  
Before You Begin  
3
Parts of the Camera  
Camera Displays  
The following types of indicator may be displayed during shooting and play-  
back. Indicators vary with camera settings.  
■ Shooting  
7 Movie quality................................................................ 45  
8 Number of available frames........................................ 101  
9 Sensitivity..................................................................... 61  
10 Image size and quality.............................................62, 63  
11 FINEPIX color ................................................................ 63  
12 White balance............................................................... 64  
13 Battery level ................................................................... 5  
14 Dual IS mode ................................................................ 81  
15 Exposure compensation................................................ 32  
16 Date and time............................................................... 18  
1 Shooting mode............................................................. 24 17 Blur warning............................................................35, 94  
2 Intelligent Face Detection indicator .............................. 29 18 Focus warning .........................................................21, 94  
3 Continuous shooting mode........................................... 65 19 Self-timer indicator ...................................................... 36  
4 Silent mode indicator ................................................3, 77 20 Macro (close-up) mode................................................. 33  
5 Focus frame .................................................................. 30 21 Flash mode ................................................................... 34  
6 Internal memory indicator*  
*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P11).  
4
Before You Begin  
Parts of the Camera  
■ Playback  
1 Playback mode indicator..........................................23, 37  
2 Intelligent Face Detection indicator .........................29, 71  
3 Red-eye removal indicator............................................ 71  
4 Portrait enhancer.......................................................... 25  
5 Silent mode indicator ................................................3, 77  
6 Gift image..................................................................... 37  
7 Frame number.............................................................. 79  
8 Mark for upload to........................................................ 69  
9 Photobook assist........................................................... 42  
10 Favorites ....................................................................... 37  
11 DPOF print indicator ..................................................... 51  
12 Protected image ........................................................... 71  
Batterryy LLevel  
Battery level is shown as follows:  
Indicator  
Description  
D(white)  
C(white)  
B(red)  
Battery partially discharged.  
Battery more than half discharged.  
Low battery. Charge as soon as possible.  
A(blinks red) Battery exhausted. Turn camera off and charge battery.  
Before You Begin  
5
Parts of the Camera  
Hiding and Viewing Indicators  
Press DISP/BACK to cycle through shooting and playback indicators as follows:  
• Shooting: Indicators displayed/indicators hidden/best framing  
• Playback: Indicators displayed/indicators hidden/Ifavorites  
6
Before You Begin  
First Steps  
Chhaarrggiinngg the Batteerryy  
The battery is not charged at shipment. Charge the battery before use.  
Place the battery in the supplied battery charger.  
1
Insert the battery in the orientation  
Battery  
indicated by the CBD labels.  
Arrow  
The camera uses an NP-45A recharge-  
able battery.  
CBD  
label  
CBD label  
Battery charger  
Plug the charger in.  
2
Plug the charger into a power outlet. The charging indicator will light.  
Thhee CCharggiinngg IInnddicator  
The charging indicator shows battery charge status as follows:  
Charging indicator  
Battery status  
Battery not inserted.  
Battery fully charged.  
Battery charging.  
Battery fault.  
Action  
Insert the battery.  
Reemmoove the battery.  
—
Unplug thhe chargeer and remmove the battery.  
Off  
On (green)  
On (yeelloow)  
Blinks ((yelloow)  
7
Charging the Battery  
Charge the battery.  
3
Remove the battery when charging is complete. See the specifications  
(P106) for charging times (note that charging times increase at low tem-  
peratures).  
Q Unplug the charger when it is not in use.  
8
First Steps  
Innsseertinng the Baatttterryy aanndd aa MMemory Cardd  
Although the camera can store pictures in internal memory, optional SD,  
SDHC, and SDXC memory cards (sold separately) can be used to store addi-  
tional pictures. After charging the battery, insert the battery and memory  
card as described below.  
Open the battery-chamber cover.  
Press the latch as shown.  
1
R Be sure the camera is off before opening the  
battery-chamber cover.  
Q Do not open the battery-chamber cover  
when the camera is on. Failure to observe this  
precaution could result in damage to image files or memory cards.  
Q Do not use excessive force when handling the battery-chamber cover.  
Q Remove water droplets and other foreign matter with a dry cloth before open-  
ing the battery-chamber cover.  
First Steps  
9
Inserting the Battery and a Memory Card  
Insert the battery.  
2
Insert the battery with the terminal first and  
in the orientation shown by the label inside  
the battery chamber, keeping the battery  
latch pressed to one side. Confirm that the  
battery is securely latched.  
Q Insert the battery in the correct orientation.  
Do NOT use force or attempt to insert the bat-  
tery upside down or backwards. The battery  
will slide in easily in the correct orientation.  
Battery latch  
Label  
10  
First Steps  
Inserting the Battery and a Memory Card  
Insert the memory card.  
3
Holding the memory card in the orientation  
shown at right, slide it in until it clicks into  
place at the back of the slot.  
Q Be sure card is in the correct orientation; do  
not insert at an angle or use force. If the mem-  
ory card is not correctly inserted or no mem-  
ory card is inserted, awill appear in the LCD  
monitor and internal memory will be used for  
recording and playback.  
Click  
Q SD/SDHC/SDXC memory cards can be locked,  
making it impossible to format the card or to  
record or delete images. Before inserting an  
SD/SDHC/SDXC memory card, slide the write-  
protect switch to the unlocked position.  
Write-protect switch  
First Steps  
11  
Inserting the Battery and a Memory Card  
Close the battery-chamber cover.  
Before closing the cover, check to confirm  
that there is no dust, sand, or other foreign  
matter on the water-resistant seal or adja-  
cent surfaces.  
4
Coonnfifirrming Thhat tthe Coovveerr IIss LLaattcchhed  
• Confirm that the battery-chamber or connector cover does not protrude from the  
camera body.  
• The covers are latched when the latches are in the positions shown below at left.  
Latch indicator  
Unlatched  
Latched  
Confirm that there  
are no gaps.  
12  
First Steps  
Inserting the Battery and a Memory Card  
Reemoving the Battery annd Memorry Caarrdd  
Before removing the battery or memory card, turn the camera off and press the latch  
to open the battery-chamber cover.  
Battery latch  
To remove the battery, press the battery latch to the side, and  
slide the battery out of the camera as shown.  
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand. When a memory card  
is removed, the card could come out of the slot too quickly.  
Use your finger to hold it and gently release the card.  
First Steps  
13  
Inserting the Battery and a Memory Card  
■ Compatible Memory Cards  
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-  
proved for use in the camera. A complete list of approved memory cards  
is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.  
Operation is not guaranteed with other cards. The camera can not be used  
with xD-Picture Cards or MultiMediaCard (MMC) devices.  
Q Memory Caarrds  
• Do not turn the camera off or remove the memory card while the memory card is being formatted  
or data are being recorded to or deleted from the card. Failure to observe this precaution  
could damage the card.  
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all  
memory cards after using them in a computer or other device. For more information  
on formatting memory cards, see“KFORMAT” (P78).  
• Memory cards are small and can be swallowed; keep out of reach of children. If a  
child swallows a memory card, seek medical assistance immediately.  
• miniSD or microSD adapters that are larger or smaller than the standard dimensions  
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take  
the camera to an authorized service representative. Do not forcibly remove the card.  
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.  
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory  
card. Use a G card or better when shooting HD movies.  
14  
First Steps  
Inserting the Battery and a Memory Card  
• The data in internal memory may be erased or corrupted when the camera is re-  
paired. Please note that the repairer will be able to view pictures in internal memory.  
• Formatting a memory card or internal memory in the camera creates a folder in  
which pictures are stored. Do not rename or delete this folder or use a computer or  
other device to edit, delete, or rename image files. Always use the camera to delete  
pictures from memory cards and internal memory; before editing or renaming files,  
copy them to a computer and edit or rename the copies, not the originals.  
Q Batteries  
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this  
precaution could prevent the battery from charging.  
• Do not affix stickers or other objects to the battery. Failure to observe this precaution  
could make it impossible to remove the battery from the camera.  
• Do not short the battery terminals. The battery could overheat.  
• Read the cautions in“The Battery and Power Supply”(Pvi).  
• Use only battery chargers designated for use with the battery. Failure to observe this  
precaution could result in product malfunction.  
• Do not remove the labels from the battery or attempt to split or peel the outer casing.  
• The battery gradually loses its charge when not in use. Charge the battery one or  
two days before use.  
First Steps  
15  
Turning the Camera on and Off  
Shooting Mode  
Playback Mode  
Press the ON/OFF button to turn the To turn the camera on and begin  
camera on.  
playback, press the a button for  
about a second.  
Press ON/OFF again to turn the camera  
off.  
Press the a button again or press  
the ON/OFF button to turn the camera  
off.  
R Switching to Playback Mode  
Press the a button to start playback.  
Press the shutter button halfway to return  
to shooting mode.  
R Switching to Shooting Mode  
To exit to shooting mode, press the shut-  
ter button halfway. Press the abutton  
to return to playback.  
16  
First Steps  
Turning the Camera on and Off  
Q Fingerprints and other marks on the protective glass covering the lens can affect  
pictures. Keep the glass clean.  
Q The ON/OFF button does not completely end the supply of power to the camera.  
R Auto Power Off  
The camera will turn off automatically if no operations are performed for the length of  
time selected for MAUTO POWER OFF (P81). To turn the camera on, use the ON/OFF  
button or press the abutton for about a second.  
First Steps  
17  
Baassic SSetup  
A language-selection dialog is displayed the first time the camera is turned  
on. Set up the camera as described below (you can reset the clock or change  
languages at any time using the FDATE/TIME or La options in  
the setup menu; for information on displaying the setup menu, see page 77).  
Highlight a language and press MENU/OK.  
1
R Press DISP/BACK to skip the current step. Any steps you skip  
will be displayed the next time the camera is turned on.  
The date and time will be displayed. Press the selector  
left or right to highlight the year, month, day, hour, or  
minute and press up or down to change. To change the  
order in which the year, month, and day are displayed,  
highlight the date format and press the selector up or  
down. Press MENU/OK when settings are complete.  
2
R Thhee CCamera Clock  
If the battery is removed for an extended period, the camera clock will be reset and the  
language-selection dialog will be displayed when the camera is turned on.  
18  
First Steps  
Basic Photography and Playback  
Taking Pictures in Q (Scene RReeccoognitiioonn)) MMode  
This section describes how to take pictures in Q (scene recoggnitiioon) mode.  
The camera automatically analyzes the composition and adjusts settings ap-  
propriately.  
Turn the camera on.  
Press the ON/OFF button to turn the camera on.  
1
Q shooting indicators will be displayed.  
The gIccoon  
This icon indicates that the camera continuously searches for faces to select the  
appropriate scene, increasing the drain on the battery.  
Thhe Scene Iccoon  
The camera selects the scene according to shooting conditions and the type of  
subject: bPORTRAIT (portraits), c LANDSCAPE (landscapes), dNIGHT (poorly-lit land-  
scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT  
(backlit portraits), aAUTO (all other scenes)  
19  
Taking Pictures in Q (Scene Recognition) Mode  
Frame the picture.  
Use the zoom control to frame the picture in the display.  
2
Zoom out  
Zoom in  
Zoom indicator  
Hoollddiinngg tthhee CCamera  
Hold the camera steady with both hands and brace your  
elbows against your sides. Shaking or unsteady hands can  
blur your shots.  
To prevent pictures that are out of focus or too dark (under-  
exposed), keep your fingers and other objects away from  
the flash and from the protective glass covering the lens.  
20  
Basic Photography and Playback  
Taking Pictures in Q (Scene Recognition) Mode  
Focus.  
3
Press the shutter button halfway to focus.  
Double  
beep  
R The lens may make a noise when the camera focuses; this  
is normal.  
If the camera is able to focus, it will beep twice and the in-  
dicator lamp will glow green.  
If the camera is unable to focus, the focus frame will turn red, swill be dis-  
played, and the indicator lamp will blink green. Change the composition  
or use focus lock (P30).  
Basic Photography and Playback  
21  
Taking Pictures in Q (Scene Recognition) Mode  
Shoot.  
4
Smoothly press the shutter button the rest of the way  
down to take the picture.  
Click  
R If the subject is poorly lit, the flash may fire when the pic-  
ture is taken. For information on using the flash when  
lighting is poor, see “N Using the Flash (Intelligent Flash)”  
(P34).  
Thhee SShhuuttter Button  
The shutter button has two positions. Pressing the shutter button halfway sets  
focus and exposure; to shoot, press the shutter button the rest of the way down.  
22  
Basic Photography and Playback  
Viewing Pictures  
Pictures can be viewed in the LCD monitor. When taking important photo-  
graphs, take a test shot and check the results.  
Press the abutton.  
The most recent picture will be displayed.  
1
View additional pictures.  
2
Press the selector right to view pictures in the  
order recorded, left to view pictures in reverse  
order.  
Press the shutter button halfway to exit to shoot-  
ing mode.  
Basic Photography and Playback  
23  
More on Photography  
Shhooottiinngg MMode  
Choose a shooting mode according to the scene or type of subject.  
Choosing a Shooting Mode  
Press MENU/OK to display the shooting menu.  
1
2
Highlight ASHOOTING MODE and press the  
selector right to display shooting mode options.  
Highlight the desired mode and press MENU/OK.  
3
4
Press DISP/BACK to exit to shooting mode.  
24  
Shooting Mode  
Shooting Mode Options  
Mode  
Description  
The camera automatically analyzes the composition and selects a scene  
according to shooting conditions and the type of subject.  
QSCENE RECOGNITION  
Choose for crisp, clear snapshots. This mode is recommended in most  
situations.  
B AUTO  
P
PROGRAM AE  
The camera sets exposure automatically.  
The camera takes two shots: one without the flash and one with.  
Capture natural lighting under low-light conditions.  
Choose for portraits.  
CNATURAL & N  
DNATURAL LIGHT  
L PORTRAIT  
Z PORTRAIT ENHANCER Choose for a smooth skin effect when shooting portraits.  
M LANDSCAPE  
Choose for daylight shots of buildings and landscapes.  
r MOTION PANORAMA Take up to three pictures and join them together to form a panorama.  
N SPORT  
Choose when photographing moving subjects.  
O NIGHT  
H NIGHT (TRIPOD)  
Q SUNSET  
Choose this mode for poorly lit twilight or night scenes.  
Choose this mode for slow shutter speeds when shooting at night.  
Choose this mode to record the vivid colors in sunrises and sunsets.  
Choose for crisp, clear shots that capture the brightness of scenes domi-  
nated by shining white snow.  
R SNOW  
S BEACH  
Choose for crisp, clear shots that capture the brightness of sunlit beaches.  
More on Photography  
25  
Shooting Mode  
Mode  
F UNDERWATER  
Description  
Choose for underwater photography.  
t UNDER WWATER  
Choose for wide-angle underwater shots that include more of the back-  
ground behind the main subject.  
(WIDE)  
s UNDER WWATER  
Choose for underwater close-ups of small objects.  
(MACRO)  
U PARTY  
V FLOWER  
W TEXT  
Capture indoor background lighting under low-light conditions.  
Choose for vivid close-ups of flowers.  
Take clear pictures of text or drawings in print.  
26  
More on Photography  
Shooting Mode  
■ r MOTION PANORAMA  
In this mode, you can take up to three pictures and join them together to  
form a panorama. Use of a tripod is recommended to assist in composing  
overlapping shots.  
Press the selector up to select a frame. Press the selector left or right to  
highlight a pan direction and press MENU/OK.  
1
Take a photograph. Exposure and white balance for the panorama are set  
with the first shot.  
2
Frame the next shot to overlap with the previous picture by superimpos-  
ing y on + so that they form a solid circle (z). The camera will release the  
3
shutter automatically.  
Pan direction  
Display after 1st shot  
Shutter released  
More on Photography  
27  
Shooting Mode  
Take the last shot as described in Step 3.  
4
R To end shooting and create a panorama after the first or second shot, press the  
multi selector up after completing Step 2 or Step 3 and proceed to Step 5.  
Press MENU/OK to save the picture.  
5
Q Panoramas are created from multiple frames. The camera may in some cases be  
unable to stitch the frames together perfectly.  
Q The desired results may not be achieved with moving subjects, subjects close to  
the camera, unvarying subjects such as the sky or a field of grass, subjects that are  
in constant motion, such as waves and waterfalls, or subjects that undergo marked  
changes in brightness. Panoramas may be blurred if the subject is poorly lit.  
For Besst Results  
For best results, be careful not to tilt the camera backward or forward or to either  
side and try not to move the camera while y and + are aligned to form a solid circle.  
Printting PPanoramas  
Depending on the page size and the size of the panorama, panoramas may print  
with their edges cropped out or with wide margins at the top and bottom or at  
both sides.  
28  
More on Photography  
bInnttelligent Facce Deteeccttiioonn  
Intelligent Face Detection sets focus and exposure for human faces anywhere  
in the frame, preventing the camera from focusing on the background in  
group portraits. Choose for shots that emphasize portrait subjects.  
To use Intelligent Face Detection, press MENU/OK  
to display the shooting menu and select ON for  
bFACEDETECTION(P65). Facescanbedetected  
with the camera in vertical or horizontal orientation;  
if a face is detected, it will be indicated by a green  
border. If there is more than one face in the frame,  
the camera will select the face closest to the center;  
other faces are indicated by white borders.  
Q In some modes, the camera may set exposure for the frame as a whole rather than  
the portrait subject.  
Q If the subject moves as the shutter button is pressed, their face may not be in the  
area indicated by the green border when the picture is taken.  
More on Photography  
29  
Focus Lock  
To compose photographs with off-center subjects:  
Focus: Position the subject in the focus frame (U)  
and press the shutter button halfway to lock focus  
and exposure. Focus and exposure will remain locked  
while the shutter button is pressed halfway (AF/AE  
lock).  
1
2
3
Recompose: Keep the button pressed halfway.  
Shoot: Press the button all the way down.  
30  
More on Photography  
Focus Lock  
Autoffocus  
Although the camera boasts a high-precision autofocus system, it may be unable to  
focus on the subjects listed below. If the camera is unable to focus, focus on another  
subject at the same distance and use focus lock to recompose the photograph.  
• Very shiny subjects such as mirrors or car bodies.  
• Subjects that show little contrast with the background  
• Fast-moving subjects.  
(for example, subjects in clothing that is the same color  
• Subjects photographed through a window or other re- as the background).  
flective object.  
• Subjects positioned in front of or behind a high-contrast  
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a  
light, such as hair or fur.  
• Insubstantial subjects, such as smoke or flame.  
subject photographed against a backdrop of highly con-  
trasting elements).  
More on Photography  
31  
dExposure Coompeenssaation  
To adjust exposure compensation when photo-  
graphing very bright, very dark, or high-contrast  
subjects, press the selector up (d). Press the selec-  
tor up or down to choose an exposure compensa-  
tion value and then press MENU/OK.  
Choose positive (+) values  
to increase exposure  
Choose negative (–) values  
to reduce exposure  
R A dicon and exposure indicator are displayed at settings other than 0. Exposure  
compensation is not reset when the camera is turned off; to restore normal expo-  
sure control, choose a value of 0.  
R Turn the flash off when using exposure compensation.  
R Exposure compensation is available only when P (PROGRAM AE) is selected for  
shooting mode.  
32  
More on Photography  
FMaacroo Mooddee ((CClloossee--uups)  
For close-ups, press the selector left (F) and select  
F. When macro mode is in effect, the camera fo-  
cuses on subjects near the center of the frame. Use  
the zoom control to compose pictures (P20).  
To exit macro mode, press the selector left (F) and  
select H.  
R Use of a tripod is recommended to prevent blur caused  
by camera shake.  
More on Photography  
33  
NUsing the Flash (Intellligenntt Flashh)  
When the flash is used, the camera’s Intelligent Flash system instantly analyzes  
the scene based on such factors as the brightness of the subject, its position  
in the frame, and its distance from the camera. Flash output and sensitivity  
are adjusted to ensure that the main subject is correctly exposed while pre-  
serving the effects of ambient background lighting, even in dimly-lit indoor  
scenes. Use the flash when lighting is poor, for example when shooting at  
night or indoors under low light.  
Press the selector right (N) and choose from the fol-  
lowing flash modes:  
Option  
Description  
AUTO/K  
(AUTO FLASH)  
The flash fires when required. Recommended in most situations.  
N/L  
The flash fires whenever a picture is taken. Use for backlit subjects or for natural  
(FORCED FLASH) coloration when shooting in bright light.  
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is  
(SUPPRESSED FLASH) recommended.  
O/M  
Capture both the main subject and the background under low light (note that  
(SLOW SYNCHRO) brightly lit scenes may be overexposed).  
34  
More on Photography  
NUsing the Flash (Intelligent Flash)  
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.  
At slow shutter speeds, kwill appear in the display to warn that pictures may be  
blurred; use of a tripod is recommended.  
R The flash may fire several times with each shot. Do not move the camera until  
shooting is complete.  
R The flash may cause vignetting.  
Red-Eye Reemmovaall  
When Intelligent Face Detection (P29) and red-eye removal (P71) are  
on, red-eye removal is available in auto (K; RED EYE REDUCTION), flash  
on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.  
Red-eye removal minimizes “red-eye”caused when light from the flash is  
reflected from the subject’s retinas as shown in the illustration at right.  
More on Photography  
35  
hUsing thee Selff-Timer  
To use the self-timer, press the selector down (h)  
and choose from the following options:  
Option  
T(OFF)  
Description  
Self-timer off.  
The camera starts the timer when it detects two portrait subjects close together.  
Press the selector up to choose how close the subjects must be together before  
the timer starts (the more hearts, the closer the subjects must be together).  
R To stop the timer before the picture is taken, press DISP/BACK.  
a(COUPLE TIMER)  
The camera will start the timer when it detects the selected number of portrait  
g( GROUP TIMER) subjects. Press the selector up to choose the number of subjects.  
R To stop the timer before the picture is taken, press DISP/BACK.  
The shutter is released ten seconds after the shutter button is pressed. Use for  
S(10 SEC)  
self-portraits. The self-timer lamp on the front of the camera blinks while the  
timer counts down.  
The shutter is released two seconds after the shutter button is pressed. Use to  
reduce blur caused by the camera moving when the shutter-release button is  
pressed. The self-timer lamp will blink as the timer counts down.  
R(2 SEC)  
36  
More on Photography  
More on Playback  
Playback OOpptions  
To view the most recent picture in the LCD monitor, press the abutton.  
Press the selector right to view pictures in the order recorded, left to view  
pictures in reverse order. Keep the selector pressed to scroll rapidly to the  
desired frame.  
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during  
playback.  
IFavorites: Rating Pictures  
To rate the picture currently displayed in full-frame playback, press DISP/BACK  
and press the selector up and down to select from zero to five stars.  
37  
Playback Options  
Playback Zoom  
Select T to zoom in on pictures displayed in single-frame playback; select W to  
zoom out. When the picture is zoomed in, the selector can be used to view  
areas of the image not currently visible in the display.  
Zoom indicator  
Navigation window shows  
portion of image currently  
displayed in LCD monitor  
Press DISP/BACK to exit zoom.  
R The maximum zoom ratio varies with image size. Playback zoom is not available  
with cropped or resized copies saved at a size of a or smaller.  
38  
More on Playback  
Playback Options  
Multi-Frame Playback  
Selecting W when a picture is shown full-frame in the LCD monitor displays  
the current image with previous and following images in the background.  
Select W to increase the number of images displayed to two, nine, or one  
hundred, T to view fewer images.  
When two or more images are displayed, use the selector to highlight images  
and press MENU/OK to view the highlighted image full frame. In the nine- and  
hundred-frame displays, use the selector to view more pictures.  
More on Playback  
39  
ADeleting Piictures  
To delete individual pictures, multiple selected  
pictures, or all pictures, press MENU/OK, select  
AERASE(P67),andchoosefromtheoptionsbe-  
low. Note that deleted pictures can not be recov-  
ered. Copy important pictures to a computer or other storage device before  
proceeding.  
Option  
Description  
Press the selector left or right to scroll through pictures and press MENU/OK  
to delete the current picture (a confirmation dialog is not displayed).  
FRAME  
Highlight pictures and press MENU/OK to select or deselect (pictures that  
are protected or in a print order are shown by u). When the operation is  
complete, press DISP/BACK to display a confirmation dialog, then highlight  
OK and press MENU/OK to delete the selected pictures.  
A confirmation dialog will be displayed; highlight OK and press MENU/OK to  
delete all unprotected pictures (if a memory card is inserted, only the pic-  
tures on the memory card will be affected; the pictures in internal memory  
are only deleted if no memory card is inserted). Pressing DISP/BACK cancels  
deletion; note that any pictures deleted before the button was pressed can  
not be recovered.  
SELECTED FRAMES  
ALL FRAMES  
R Protected pictures can not be deleted. Remove protection from any pictures you  
wish to delete (P71).  
R If a message appears stating that the selected images are part of a DPOF print order,  
press MENU/OK to delete the pictures.  
40  
More on Playback  
bImmaage SSearch  
Search for pictures.  
Select bIMAGE SEARCH in the playback menu (P67), highlight one of  
the following search criteria, and press MENU/OK:  
• BY DATE: Search by date.  
1
• BY FACE: Search for faces from the face recognition database.  
• BY IFAVORITES: Search by rating.  
• BY SCENE: Search by scene.  
• BY TYPE OF DATA: Find all still pictures, all movies, or edited pictures.  
• BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-  
nation.  
Select a search condition. Only pictures that match the search condition  
will be displayed. To delete or protect selected pictures or to view the  
search results in a slide show, press MENU/OK and choose AERASE (P40),  
DPROTECT (P71), or ISLIDE SHOW (P70).  
2
More on Playback  
41  
kPhotooBBoook Assist  
Create books from your favorite photos.  
Creating a PhotoBook  
Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu  
(P67) and choose from the following options:  
1
• SELECT FROM ALL: Choose from all available pictures.  
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search  
conditions (P41).  
R Neither photographs a or smaller nor movies can be selected for photobooks.  
Scroll through the images and press the selector up to select or deselect.  
To display the current image on the cover, press the selector down. Press  
MENU/OK to exit when the book is complete.  
2
3
R The first picture selected becomes the cover image. Press the selector down to  
select a different image for the cover.  
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-  
ing the specified search conditions for the book, choose SELECT ALL).  
The new book will be added to the list in the photobook assist menu.  
Q Books can contain up to 300 pictures.  
Q Books that contain no photos are automatically deleted.  
42  
More on Playback  
kPhotoBook Assist  
Viewing Photobooks  
Highlight a book in the photobook assist menu and press MENU/OK to display  
the book, then press the selector left or right to scroll through the pictures.  
Editing and Deleting Photobooks  
Display the photobook and press MENU/OK. The following options will be dis-  
played; select the desired option and follow the on-screen instructions.  
• EDIT: Edit the book as described in“Creating a PhotoBook”(P42).  
• ERASE: Delete the book.  
Photoobooks  
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-  
ware.  
More on Playback  
43  
Viewing Panoramas  
If you press the selector down when a panorama is displayed full frame, the  
camera will play back the picture from left to right. To pause playback, press  
the selector down; press the selector down again to resume. To exit to full-  
frame playback, press the selector up while panorama playback is in progress.  
44  
More on Playback  
Movies  
Recordiinngg MMoviess  
Press t to shoot a movie. During recording,  
yREC and the time remaining will be displayed  
in the LCD monitor and sound will be recorded via  
the built-in microphone (be careful not to cover the  
microphone during recording).  
Time available is displayed  
in monitor  
To end recording, press the tbutton again. Recording ends automatically  
when the movie reaches maximum length or memory is full.  
R Zoom can be adjusted while recording is in progress.  
R Before recording, select a frame size using the VMOVIE QUALITY option in the  
shooting menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Defini-  
tion) or f (640×480) to record longer standard definition movies.  
R Focus is fixed when tis pressed. Exposure and white balance are adjusted auto-  
matically throughout recording. The color and brightness of the image may vary  
from that displayed before recording begins.  
R Sounds made by the camera may be recorded.  
45  
Recording Movies  
Q The indicator lamp lights while movies are being recorded. Do not open the bat-  
tery chamber during shooting or while the indicator lamp is lit. Failure to observe  
this precaution could prevent the movie from being played back.  
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.  
This is normal and does not indicate a malfunction.  
Q The temperature of the camera may rise if it is used to record movies for an ex-  
tended period or if the ambient temperature is high. This is normal and does not  
indicate a malfunction.  
46  
Movies  
Viewing Movvies  
100-006  
During playback, movies are displayed in the LCD monitor  
as shown at right. The following operations can be per-  
formed while a movie is displayed:  
PLAY  
Option  
Description  
Start/pause Press the selector down to start playback. Press again to  
playback pause.  
End playback/ Press the selector up to end playback. If playback is not in  
delete  
progress, pressing the selector up will delete the movie.  
Press the selector right to advance, left to rewind. If playback  
is paused, the movie will advance or rewind one frame  
each time the selector is pressed.  
Advance/  
rewind  
Press MENU/OK to pause playback and display volume con-  
trols. Press the selector up or down to adjust the volume  
and press MENU/OK to exit. Volume can also be adjusted  
from the setup menu.  
Adjust voolume  
Q Do not cover the speaker during playback.  
Movies  
47  
Connections  
Viewing Pictures on TV  
Connect the camera to a TV to show pictures to a group.  
Turn the camera off and connect an optional A/V cable as shown below.  
1
Connect yellow plug to  
video-in jack  
Insert into  
USB multi-connector  
Connect white plug to  
Connector cover  
Battery-chamber cover  
audio-in jack  
Q When connecting cables, be sure the connectors are fully inserted.  
Q Be sure the battery-chamber cover is open before attempting to open or close  
the connector cover.  
R Image quality may drop during movie playback.  
R Optional accessories (P84, 85) are required to view HD movies on a high-defini-  
tion TV. The HDP-L1 HD player uses SDHC and SD memory cards.  
Tune the television to the video input channel. See the documentation  
supplied with the television for details.  
2
3
Press the abutton for about a second to turn the camera on. The camera  
monitor turns off and pictures and movies are played back on the TV. Note  
that the camera volume controls have no effect on sounds played on the  
TV; use the television volume controls to adjust the volume.  
48  
Printing Pictures via USB  
If the printer supports PictBridge, the camera can be connected  
directly to the printer as shown below and pictures can be printed  
without first being copied to a computer. Note that depending on  
the printer, not all the functions described below may be supported.  
Connect the supplied USB cable as shown and turn the printer on.  
1
Q Be sure the battery-chamber cover is open before attempting to open or close  
the connector cover.  
Connector cover  
Battery-chamber cover  
Press the abutton for about a second to turn the camera on.  
Press the selector left or right to display a picture you wish to print.  
Press the selector up or down to choose the number of copies (up to 99).  
2
3
4
5
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a  
confirmation dialog when settings are complete.  
Connections  
49  
Printing Pictures via USB  
Press MENU/OK to start printing. Printing can be interrupted by pressing  
DISP/BACK, but note that some printers may not respond immediately. If  
the printer stops before printing is complete, turn the camera off and then  
on again.  
6
After confirming that PRINTING has cleared from the camera display, turn  
the camera off and disconnect the USB csable.  
7
R Pictures can be printed from internal memory or a memory card that has been  
formatted in the camera.  
R If no pictures are selected, the camera will print one copy of the current picture.  
R Page size, print quality, and border selections are made using the printer.  
Printinng thee DDaattee ooff RReecoorrding  
To print the date of recording on pictures, press DISP/BACK in the PictBridge display  
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without  
the date of recording, select PRINT WITHOUT DATE).  
50  
Connections  
Printing Pictures via USB  
Printing the DPOF Print Order  
The KPRINT ORDER (DPOF) option in the playback menu can be used to  
create a digital “print order” for PictBridge-compatible printers (P84) or de-  
vices that support DPOF.  
DPOF  
DPOF (Digital Print Order Format) is a standard that allows pictures to be  
printed from“print orders”stored in internal memory or on a memory card.  
The information in the order includes the pictures to be printed and the  
number of copies of each picture.  
Select playback mode and press MENU/OK to display the playback menu.  
1
2
3
Highlight KPRINT ORDER (DPOF) and press MENU/OK.  
Highlight one of the following options and press MENU/OK:  
• WITH DATE s: Print the date of recording on pictures.  
• WITHOUT DATE: Do not print the date of recording on pictures.  
R Some printers do not support date printing. See the printer manual for details.  
Press the selector left or right to display a picture you wish to add to or  
remove from the print order.  
4
Connections  
51  
Printing Pictures via USB  
Press the selector up or down to choose the number of copies (up to 99).  
To remove a picture from the print order, press the selector down until the  
number of copies is zero.  
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when  
settings are complete.  
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print  
order.  
R Remove the memory card to create or modify a print order for the pictures in  
internal memory.  
R Print orders can contain a maximum of 999 pictures.  
R If a memory card is inserted containing a print order created by another camera,  
a message will be displayed. Create a new print order as described above.  
52  
Connections  
Viewingg Picturreess oonn aa CCoommppuutter  
The supplied software can be used to copy pictures to a computer, where  
they can be stored, viewed, organized, and printed. Before proceeding, install  
the software as described below. Do NOT connect the camera to the computer  
until installation is complete.  
Windows: Installing MyFinePix Studio  
Confirm that the computer meets the following system requirements:  
1
Windows 7*  
Windoows Vista*  
Windows XP*  
2GHz Pentium 4 or  
better  
CPU  
3GHz Pentium 4 or better  
RAM  
Free disk space  
1GB or more  
15GB or more  
512MB or more  
2GB or more  
• 1024×768 pixels or more with 24-bit color or better  
• A graphics processing unit (GPU) that supports DirectX 7 or later  
Video  
• Built-in USB port recommended. Operation is not guaranteed with other  
USB ports.  
Other  
• Internet connection (broadband recommended) required to install  
.NET Framework (if necessary), to use auto update feature, and when per-  
forming such tasks as sharing pictures on-line or via e-mail.  
* Other versions of Windows are not supported. Only pre-installed operating systems are  
supported; operation is not guaranteed on home-built computers or computers that have  
been upgraded from earlier versions of Windows.  
Start the computer. Log in to an account with administrator privileges  
before proceeding.  
2
Connections  
53  
Viewing Pictures on a Computer  
Exit any applications that may be running and insert the installer CD in a  
CD-ROM drive.  
3
Windoows 7/Wiindows Vista  
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”  
dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).  
The installer will start automatically; click Install MyFinePix Studio and  
follow the on-screen instructions to install MyFinePix Studio.  
If the Installer Does Noott SSttaarrtt AAuuttoommaattiiccaalllly  
If the installer does not start automatically, select Computer or My Computer  
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX  
CD window and double-click setup or SETUP.EXE.  
If prompted to install Windows Media Player, DirectX, or .NET Framework,  
follow the on-screen instructions to complete installation.  
4
Remove the installer CD from the CD-ROM drive when installation is com-  
plete. Store the installer CD in a dry location out of direct sunlight in case  
you need to re-install the software.  
5
Installation is now complete. Proceed to“Connecting the Camera”(P57).  
54  
Connections  
Viewing Pictures on a Computer  
Macintosh: Installing FinePixViewer  
Confirm that the computer meets the following system requirements:  
1
CPU  
PowerPC or Intel  
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.  
com/support/digital_cameras/compatibility/ for more information)  
OS  
RAM  
256MB or more  
A minimum of 200MB required for installation with 400MB available when  
FinePixViewer is running  
800×600 pixels or more with thousands of colors or better  
Free disk space  
Video  
Built-in USB port recommended. Operation is not guaranteed with other USB  
ports.  
Other  
After starting the computer and quitting any applications that may be run-  
ning, insert the installer CD in a CD-ROM drive and double-click Installer  
for Mac OS X.  
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start  
installation. Enter an administrator name and password when prompted  
and click OK, then follow the on-screen instructions to install FinePixViewer.  
Click Exit to quit the installer when installation is complete.  
Connections  
55  
Viewing Pictures on a Computer  
Remove the installer CD from the CD-ROM drive. Note that you may be  
4
unable to remove the CD if Safari is running; if necessary, quit Safari before  
removing the CD. Store the installer CD in a dry location out of direct sun-  
light in case you need to re-install the software.  
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,  
and select Preferences… from the Image Capture application menu. The  
Image Capture preferences dialog will be displayed; choose Other… in  
the When a camera is connected, open menu, then select FPVBridge in  
the “Applications/FinePixViewer” folder and click Open. Quit Image Cap-  
ture.  
5
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”  
folder and start Image Capture. The camera will be listed under DEVICES;  
select the camera and choose FPVBridge from the Connecting this cam-  
era opens menu and click Choose. Quit Image Capture.  
Installation is now complete. Proceed to“Connecting the Camera”(P57).  
56  
Connections  
Viewing Pictures on a Computer  
Connecting the Camera  
If the pictures you wish to copy are stored on a memory card, insert the  
card into the camera.  
1
R Windows users may require the Windows CD when starting the software for  
the first time.  
Q Loss of power during transfer could result in loss of data or damage to internal  
memory or the memory card. Charge the battery before connecting the camera.  
Turn the camera off and connect the  
supplied USB cable as shown, making  
sure the connectors are fully inserted.  
Connect the camera directly to the com-  
puter; do not use a USB hub or keyboard.  
2
Q Be sure the battery-chamber cover is open  
before attempting to open or close the  
connector cover.  
Connector cover  
Battery-chamber  
cover  
Press the abutton for about a second to turn the camera on. MyFinePix  
Studio or FinePixViewer will start automatically; follow the on-screen in-  
structions to copy pictures to the computer. To exit without copying pic-  
tures, click Cancel.  
3
R If the software does not start automatically, it may not be correctly installed.  
Disconnect the camera and reinstall the software.  
Connections  
57  
Viewing Pictures on a Computer  
For more information on using the supplied software, start the application  
and select the appropriate option from the Help menu.  
Q If a memory card containing a large number of images is inserted, there may be a  
delay before the software starts and you may be unable to import or save images.  
Use a memory card reader to transfer pictures.  
Q Make sure that the computer does not display a message stating that copying is in  
progress and that the indicator lamp is out before turning the camera off or discon-  
necting the USB cable (if the number of images copied is very large, the indicator  
lamp may remain lit after the message has cleared from the computer display).  
Failure to observe this precaution could result in loss of data or damage to internal  
memory or the memory card.  
Q Disconnect the camera before inserting or removing memory cards.  
Q In some cases, it may not be possible to access pictures saved to a network server  
using the supplied software in the same way as on a standalone computer.  
Q The user bears all applicable fees charged by the phone company or Internet ser-  
vice provider when using services that require an Internet connection.  
58  
Connections  
Viewing Pictures on a Computer  
Disconnecting thhee CCamera  
After confirming that the indicator lamp is out, follow the on-screen instructions to  
turn the camera off and disconnect the USB cable.  
Uninstalling the Supplied Softtwwaarree  
Only uninstall the supplied software when it is no longer required or before begin-  
ning reinstallation. After quitting the software and disconnecting the camera, drag  
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash  
in the Finder menu (Macintosh), or open the control panel and use “Programs and  
Features”(Windows 7/Windows Vista) or“Add or Remove Programs”(Windows XP) to  
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may  
be displayed; read the contents carefully before clicking OK.  
Connections  
59  
Menus  
Using the MMenus: Shhoooottiinngg MMode  
Using the Shooting Menu  
To display the shooting menu, press MENU/OK in  
shooting mode. Highlight items and press the se-  
lector right to view options, then highlight an op-  
tion and press MENU/OK. Press DISP/BACK to exit when  
settings are complete. The options available vary with the shooting mode  
selected.  
Shooting Menu Options  
ASHOOTING MODE  
(defaults to Q)  
Choose a shooting mode according to the type of subject (P24).  
60  
Using the Menus: Shooting Mode  
NISO  
(defaults to AUTO)  
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-  
tling may appear in pictures taken at high sensitivities.  
100  
Bright  
ISO  
Scene  
3200  
Dark  
Less noticeable  
Nooiissee ((mmottling)  
More noticeable  
Option  
AUTO  
Description  
Sensitivity is adjusted automatically in response to shooting conditions.  
3200 / 1600 / 800 / 400 /  
200 / 100  
Sensitivity is set to the specified value, which is shown in the display.  
Menus  
61  
Using the Menus: Shooting Mode  
OIMAGE SIZE  
(defaults to O4:3)  
Choose the image size and aspect ratio at which pictures are record-  
ed. Large pictures can be printed at large sizes with no drop in quality,  
while small pictures require less memory, allowing more pictures to be  
recorded.  
O4 : 3  
Size Aspect ratio  
Size Versus Aspect Ratio  
Size  
Option  
O
Prints at sizes up to  
34×25cm (13.5×10in.)  
24×18cm (9.5×7in.)  
17×13cm (7×5in.)  
P
Q
Aspect ratio  
4 : 3: Pictures have the same proportions as  
the camera display.  
16 : 9: Suited for display on High Definition  
(HD) devices.  
3
9
4
16  
62  
Menus  
Using the Menus: Shooting Mode  
TIMAGE QUALITY  
(defaults to N)  
Choose how much image files are compressed.  
Option  
Description  
FINE  
Low compression. Select for higher image quality.  
NORMAL  
High compression. Select this option to store more pictures.  
PFINEPIX COLOR  
(defaults to c)  
Enhance contrast and color saturation or take pictures in black and white.  
Option  
Description  
c STANDARD  
Standard contrast and saturation. Recommended in most situations.  
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens  
and blues in landscapes.  
a CHROME  
b B&W  
f SEPIA  
Take pictures in black and white.  
Take pictures in sepia.  
R Seettttiinnggs otheer thann c STANDARD arree showwnn bbyy aann iiccoonn iinn tthe LCD monitor.  
R Depending on the subject, the effects of aCHROME may not be visible in the LCD mmoonniittoorr..  
Menus  
63  
Using the Menus: Shooting Mode  
DWHITE BAALLANCE  
(defaults to AUTO)  
For natural colors, choose a setting that matches the light source.  
Option  
AUTO  
i
Description  
White balance adjusted automatically.  
For subjects in direct sunlight.  
j
For subjects in the shade.  
k
Use under“daylight”fluorescent lights.  
Use under“warm white”fluorescent lights.  
Use under“cool white”fluorescent lights.  
Use under incandescent lighting.  
l
m
n
R Reessuullttss vvaarryy wwiitthh sshhooting coonditionnss. Play picctures back after shooting to check ccoolloorrss iinn  
the LCD monitor.  
64  
Menus  
Using the Menus: Shooting Mode  
RCONTINUOUS  
(defaults to OFF)  
Capture motion in a series of pictures.  
Option  
Description  
I ON  
OFF  
The camera takes up to 3 pictures while the shutter button is pressed.  
One photograph is taken each time the shutter button is pressed.  
R Focuss and expposuree aare deteerminedd by the first frame in each series.  
R Thhee flash turns off automatiicallly. Thhee pprreeviouslly selecteed flassh moddee is resstoreed when OFF is  
selected for RCONTINUOUS.  
R Frame rate varies with shutter speed.  
R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.  
bFACE DETECTION  
Choose whether the camera automatically detects and sets focus and exposure for human por-  
trait subjects (P29).  
Menus  
65  
Using the Menus: Shooting Mode  
FAF MODE  
This option controls how the camera selects the focus area. Regardless of the option selected,  
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.  
Option  
Description  
rCENTER  
The camera focuses on the subject in the center of the frame.  
Position the subject in the center focus area and press the selector left. Focus will  
track the subject as it moves through the frame.  
xTRACKING  
R Note that in x mode, the camera focuses continuously, increasing the drain on the bbaatttteerryy,,  
and that the sound of the camera focusing may be audible.  
VMOVIE QUALITY  
(defaults to f)  
Choose a frame size for movies (P45).  
qLED ILLUMINATOR  
(defaults to OFF)  
Choose whether the LED (P2) lights to illuminate nearby subjects when lighting is poor.  
Option  
ON  
OFF  
Description  
The LED lights during shooting.  
LED off.  
R Thhee LLEEDD wwiilll not light when ON is selected for oSILENT MODE in the setup menu (P77).  
R Seelleecctting ON increases the drain on the battery. Seelect OFF when the LED is not in use.  
66  
Menus  
Using the MMenus: Playbbaacckk MMode  
Using the Playback Menu  
To display the playback menu, press MENU/OK in play-  
back mode. Highlight items and press the selector  
right to view options, then highlight an option and  
press MENU/OK. Press DISP/BACK to exit when settings  
are complete.  
Playback Menu Options  
kPHOTOBOOK ASSIST  
Create books from your favorite photos (P42).  
bIMAGE SEARCH  
Search for pictures (P41).  
AERASE  
Delete all or selected pictures (P40).  
Menus  
67  
Using the Menus: Playback Mode  
NEDIT  
Create a retouched copy of the current picture.  
Display the desired picture.  
1
N
Select  
EDIT in the playback menu and choose from the following options:  
2
Option  
CROP  
Description  
Crop the copy.  
ASPECT RATIO Choose the aspect ratio.  
BRIGHTNESS Adjust brightness.  
CONTRAST  
COLOR  
SEPIA  
Adjust contrast.  
Choose positive values for“warmer”colors, negative values for“cooler”colors.  
Convert the copy to sepia or black and white.  
If the original was taken with Intelligent Face Detection, a mosaic effect can  
be applied to up to four faces. If Intelligent Face Detection was off or no  
faces were detected, the mosaic effect will be applied to the center of the  
image.  
FACE MOSAIC  
Press MENU/OK to create a retouched copy (in some cases, additional options will be displayed;  
adjust settings as desired and press MENU/OK to save the copy).  
3
R Reettoouucchheedd ccooppiieess ccaann nnoot be furtther retoouched, ccroppedd, or rotated.  
R Reettoouucchheedd ccooppiieess aarree 6640×4880 pixxeels in ssize.  
68  
Menus  
Using the Menus: Playback Mode  
jMARK FOR UPLOAD TO  
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).  
■ Selecting Pictures for Upload  
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and  
movies for upload to Facebook.  
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press  
DISP/BACK to exit when all the desired pictures are selected.  
2
R Only movviieess ccaann bbee sseelleected for upload to YouTube.  
R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.  
■ RESET ALL: Deselecting All Pictures  
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a  
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the  
operation is complete.  
■ Uploading Pictures (Windows Only)  
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix  
Studio.  
Select with camera  
Upload from computer  
For information on installing MyFinePix Studio and connecting the camera to a computer, see  
“Viewing Pictures on a Computer”(P53).  
Menus  
69  
Using the Menus: Playback Mode  
ISLIDEE SHOW  
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.  
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at  
any time by pressing MENU/OK.  
Option  
NORMAL  
Description  
Press selector left or right to go back or skip ahead one frame. Select FADE-IN  
for fade transitions between frames.  
FADE-IN  
NORMAL g  
FADE-IN g  
MULTIPLE  
As above, except that camera automatically zooms in on faces selected with  
Intelligent Face detection.  
Display several pictures at once.  
SCRAP BOOK VIEW Display multiple pictures in random positions and sizes.  
SELECT BGM Choose background music.  
R Thhee ccaammeerraa will not turn off autoomaticaally whiile a sliide show is in progress.  
70  
Menus  
Using the Menus: Playback Mode  
BRED EYE RREMOVAL  
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face  
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-  
eye is detected, the image will be processed to create a copy with reduced red-eye.  
Display the desired picture.  
1
Select BRED EYE REMOVAL in the playback menu.  
2
3
Press MENU/OK.  
R Reedd eeyyee mmaayy nnoott bbee rreemmooved if the camera is uunnaabbllee ttoo ddeetteecctt aa ffaaccee oorr tthhee ffaaccee iiss iinn pprroofifillee..  
Reessuullttss may differ depending on the scene. Red eeyyee ccaann nnoott bbee rreemmooved from pictures that  
have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..  
R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..  
R Copies created with BREDD EYE REMMOVAL arre indiccatedd bby a eicon during playback.  
DPROTECT  
Protect pictures from accidental deletion.  
Select DPROTECT in the playback menu.  
1
2
Highlight one of the following options and press MENU/OK:  
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.  
• SET ALL: Protect all pictures.  
• RESET ALL: Remove protection from all pictures.  
Q Protected piccturees willl be deeletedd when the meemoryy cardd oor inteernall memory iss formmatted  
(P51).  
Menus  
71  
Using the Menus: Playback Mode  
GCROP  
Create a cropped copy of the current picture.  
Display the desired picture.  
1
Select GCROP in the playback menu.  
2
3
Use the zoom control to zoom in and out and use the selector to scroll the picture until the  
desired portion is displayed.  
Press MENU/OK to display a confirmation dialog.  
4
5
Press MENU/OK again to save the cropped copy to a separate file.  
R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. IIff tthhee ssiizzee ooff tthhee fifinnaall  
copyy wwill be a, YES will be ddisplayedd inn yyeelllloow.  
ORESIZE  
Create a small copy of the current picture.  
Display the desired picture.  
1
Select ORESIZE in the playback menu.  
2
3
4
Highlight a size and press MENU/OK to display a confirmation dialog.  
Press MENU/OK to save the resized copy to a separate file.  
R Thhee ssiizzeess aavailable vary with the size of the originnal image.  
72  
Menus  
Using the Menus: Playback Mode  
CIMAGE ROTATE  
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD  
monitor.  
Display the desired picture.  
1
Select CIMAGE ROTATE in the playback menu.  
2
3
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-  
wise.  
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever  
it is played back on the camera.  
4
R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P71).  
R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.  
ECOPY  
Copy pictures from internal memory to a memory card.  
Select ECOPY in the playback menu.  
1
2
Highlight one of the following options and press the selector right:  
• aINTERNAL MEMORY y bCARD: Copy pictures from internal memory to a memory card.  
• bCARD y aINTERNAL MEMORY: Copy pictures from a memory card to internal memory.  
Highlight one of the following options and press MENU/OK:  
• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press  
MENU/OK to copy the current picture.  
3
• ALL FRAMES: Copy all pictures.  
R Copyyiinngg eennddss wwhheenn tthhee ddestination is full.  
R DPOF print information is not copied (P51).  
Menus  
73  
Using the Menus: Playback Mode  
STRANSITION  
(defaults to OFF)  
Choose the transition between images during playback.  
Option  
WIPE  
Description  
Choose for a wipe transition between images.  
SLIDE-IN Images slide into the display.  
FADE-IN  
OFF  
The next image fades in as the previous image fades out.  
No transition between frames.  
LMOVIE TRIMMING  
Remove opening or ending footage to create an edited copy of the current movie.  
Display the desired movie.  
1
Select LMOVIE TRIMMING in the playback menu. To remove footage from the start of the  
copy, proceed to Step 3; otherwise, proceed to Step 4.  
2
3
4
5
6
Press the selector down to begin playback and press it down again when the new opening  
frame is reached.  
Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,  
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).  
Press the selector down to begin playback and press it down again when the new closing  
frame is reached.  
Press MENU/OK to save the copy.  
74  
Menus  
Using the Menus: Playback Mode  
MOVIE JOIN  
Add existing footage to the end of the current movie to create an edited copy.  
Display the desired movie.  
1
Select MOVIE JOIN in the playback menu.  
2
3
4
Press the selector left or right to highlight a movie.  
Press MENU/OK to add the highlighted footage to the end of the current movie and save the  
resulting copy, or press DISP/BACK to exit without creating a copy.  
R Both mmoovies must have been recorded at thhe same ffrrame sizee and fraamme rate annd have a  
combined file size of no more than 2 GB.  
KPRINT ORDER (DPOF)  
Select pictures for printing on DPOF- and PictBridge-compatible devices (P49).  
Menus  
75  
The Setup MMenu  
Using the Setup Menu  
Display the setup menu.  
1.1 Press MENU/OK to display the menu for the cur-  
1
rent mode.  
1.2 Press the selector left to highlight the tab for the current menu.  
1.3 Press the selector down to highlight X.  
tab  
1.4 Press the selector right to place the cursor in the setup menu.  
Adjust settings.  
2
Highlight items and press the selector right to view options, then highlight  
an option and press MENU/OK. Press DISP/BACK to exit when settings are  
complete.  
76  
Menus  
The Setup Menu  
Setup Menu Options  
FDATE/TIME  
Set the camera clock (P18).  
NTIME DIFFERENCE  
(defaults to h)  
Switch the camera clock instantly from your home time zone to the local time at your destina-  
tion when traveling. To specify the difference between local time and your home time zone:  
Highlight gLOCAL and press the selector right.  
1
2
Use the selector to choose the time difference between local time and your home time zone  
in increments of 15 minutes.  
Press MENU/OK.  
3
To switch between local time and your home time zone, highlight gLOCAL or hHOME and  
press MENU/OK.  
Option  
Description  
hHOME Switch to the time currently selected for FDATE/TIME (P18).  
Switch to local time. If this option is selected, g and the time and date will be  
displayed in yellow for three seconds each time the camera is turned on.  
gLOCAL  
La  
(defaults to ENGLISH)  
Choose a language (P104).  
oSILENT MODE  
(defaults to OFF)  
Select ON to disable the speaker, flash, and LED illuminator in situations in which camera sounds  
or lights may be unwelcome (note that the flash will still fire in Cmode).  
Menus  
77  
The Setup Menu  
RRESET  
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, and QVIDEO SYSTEM to de-  
fault values.  
Highlight RRESET and press the selector right to display a confirmation dialog.  
1
2
Highlight OK and press MENU/OK.  
KFORMAT  
If a memory card is inserted in the camera, this option will format the memory card. If no mem-  
ory card is inserted, this option will format internal memory. Select OK to begin formatting.  
Q All datta—inncluding prroteccted ppiictures—willl be ddeleteed froomm the mmeemory ccard oor internal  
memory. Be ssure impoortant fifiles havvee been copied to a computer or other storaaggee ddeevice.  
Q Do not opeen the battttery cover during formatting.  
AIMAGE DISP.  
(defaults to 1.5 SEC)  
Choose how long pictures are displayed in the LCD monitor after shooting.  
Option  
3 SEC  
Description  
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).  
Colors may differ slightly from those in the final image.  
1.5 SEC  
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.  
OFF Pictures are not displayed after shooting.  
R OFF has no effect in continuous shooting mode.  
78  
Menus  
The Setup Menu  
BFRAME NO.  
(defaults to CONT.)  
New pictures are stored in image files named using a four-digit file  
number assigned by adding one to the last file number used. The file  
number is displayed during playback as shown at right. BFRAME NO.  
controls whether file numbering is reset to 0001 when a new memory Directory  
card is inserted or the current memory card or internal memory is for- number  
matted.  
Frame number  
100-0001  
File  
number  
Option  
Description  
Numbering continues from the last file number used or the first available file num-  
CONTINUOUS ber, whichever is higher. Choose this option to reduce the number of pictures  
with duplicate file names.  
Numbering is reset to 0001 after formatting or when a new memory card is in-  
serted.  
RENEW  
R If the frame number reaches 999-9999, the shutter release will be disabled (P96).  
R Seelleecctting RRESET (P78) sets BFRAAME NO. to CONTINUOUS but does not reset the file  
number.  
R Frame numbers for pictures taken with other cameras may differ.  
Menus  
79  
The Setup Menu  
GOPERATTIONN VVOL.  
(defaults to c)  
Adjust the volume of the sounds produced when camera controls are operated. Choose f  
(mute) to disable control sounds.  
HSHUTTEER VOLUME  
(defaults to c)  
Adjust the volume of the sounds produced when the shutter is released. Choose f (mute)  
to disable the shutter sound.  
eSOUND  
(defaults to i)  
(defaults to 7)  
Choose the sounds used for the shutter, at startup, and for camera controls.  
IPLAAYYBBAACK VOLUME  
Adjust the volume for movie playback.  
JLCD BRIGHTNESS  
(defaults to AUTO)  
Control the brightness of the display.  
Option  
AUTO  
Description  
Display brightness is automatically adjusted during shooting in response to ambi-  
ent lighting conditions. Brightness is not adjusted during playback.  
Press the selector up or down to adjust brightness and then press MENU/OK.  
Choose from values between –5 and +5.  
MANUAL  
80  
Menus  
The Setup Menu  
ELCD MODE  
(defaults to UON)  
Choose whether the display automatically dims to save power in shooting mode. This option  
does not take effect during playback.  
Option  
Description  
The display dims to save power if no operations are performed for a few  
UPOWER SAVE ON seconds. Normal brightness can be restored by pressing the shutter but-  
ton halfway.  
QPOWER SAVE OFF Automatic dimming off.  
MAUTO PPOWER OFF  
(defaults to 2 MIN)  
Choose the length of time before the camera turns off automatically when no operations are  
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned  
off manually. Note that in some situations the camera turns off automatically even when OFF  
is selected.  
LDUAL IS MODE  
(defaults to l)  
Choose whether image stabilization is performed at all times when the camera is in shooting  
mode (lCONTINUOUS), or only when the shutter button is pressed halfway (mSHOOT-  
ING ONLY). Choose OFF to turn image stabilization off when using a tripod.  
BRED EYE RREMOVAL  
(defaults to ON)  
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face  
Detection.  
R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..  
Menus  
81  
The Setup Menu  
DDIGITAL ZOOM  
(defaults to OFF)  
If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom,  
further magnifying the image.  
Thhe Zoooomm IInnddicattoor  
W
W
T
DIGITAL ZOOM on  
Optical zoom  
Optical zoom  
Digital zoom  
T
DIGITAL ZOOM off  
Q Digital zooom prrooducess lower quality images than optical zoom.  
nSAVE ORG IMAGE  
(defaults to OFF)  
Select ON to save unprocessed copies of pictures taken with red-eye removal.  
cGUIDANCE DISPPLLAY  
(defaults to ON)  
Choose whether to display tool tips.  
82  
Menus  
The Setup Menu  
QVIDEO SYSTEM  
(defaults to NTSC)  
Choose a video mode for connection to a TV. SECAM is not supported.  
Option  
NTSC  
Description  
Select this mode for connection to video devices in North America, the Carib-  
bean, parts of Latin America, and some East Asian countries.  
Select this mode for connection to video devices in the United Kingdom and  
much of Europe, Australia, New Zealand, and parts of Asia and Africa.  
PAL  
Menus  
83  
Technical Notes  
Oppttiioonnaall AAcccesssoories  
The camera supports a wide range of accessories from FUJIFILM and other  
manufacturers.  
DIGITAL CAMERA  
■ Printing  
■ Audio/Visual  
FINEPIX XP20 Series  
A/V cable (optional)  
USB cable  
(supplied)  
TV*  
PictBridge-compatible  
printer*  
SD/SDHC/SDXC  
memory card  
HDMI cable  
(sold separately)  
HDTV*  
Printer*  
HDP-L1  
HD player †  
†SDXC cards not supported.  
■ Coommpputer Reellatteedd  
USB cable (supplied)  
SD card slot or card reader  
Computer*  
* Available separately.  
84  
Optional Accessories  
Accessories from FUJIFILM  
The following optional accessories are available from FUJIFILM. For the lat-  
est information on the accessories available in your region, check with your  
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_  
cameras/index.html.  
Recharggeeable NP-45A: Additional large-capacity NP-45A rechargeable  
Li-ion batteries batteries can be purchased as required.  
BC-45W: Replacement battery chargers can be purchased  
as required. The BC-45W charges an NP-45A battery in  
about 120 minutes at +20°C (+68°F).  
Battery  
chargers  
A/V cable  
AV-C1: Use for viewing pictures on TV.  
HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-  
nect to a High Definition (HD) TV to view photographs  
and movies from SD/SDHC memory cards.  
HD players  
Technical Notes  
85  
Caring for the Camera  
To ensure continued enjoyment of the product, observe the following pre-  
cautions.  
Storage and Use  
If the camera will not be used for an ■ Condensation  
extended period, remove the battery Sudden increases in temperature,  
and memory card. Do not store or such as occur when entering a heated  
use the camera in locations that are:  
• exposed to rain, steam, or smoke  
• very humid or extremely dusty  
building on a cold day, can cause con-  
densation inside the camera. If this  
occurs, turn the camera off and wait  
• exposed to direct sunlight or very an hour before turning it on again. If  
high temperatures, such as in a condensation forms on the memory  
closed vehicle on a sunny day  
• extremely cold  
card, remove the card and wait for the  
condensation to dissipate.  
• subject to strong vibration  
• exposed to strong magnetic fields,  
such as near a broadcasting anten-  
na, power line, radar emitter, motor,  
transformer, or magnet  
• in contact with volatile chemicals  
such as pesticides  
• next to rubber or vinyl products  
86  
Technical Notes  
Caring for the Camera  
Cleaning  
Use a blower to remove dust from the protective glass covering the lens and  
LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can  
be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to  
which a small amount of lens-cleaning fluid has been applied. Care should  
be taken to avoid scratching the protective glass or LCD monitor. The camera  
body can be cleaned with a soft, dry cloth. Do not use alcohol, thinner, or  
other volatile chemicals.  
Traveling  
Keep the camera in your carry-on baggage. Checked baggage may suffer  
violent shocks that could damage the camera.  
Technical Notes  
87  
Troubleshooting  
Problems and Solutions  
Water in the Camera  
Problem  
Solution  
The batttery--chamber cover was not fully closed befoorree tthhee ccamera was immerseed, or wass opened  
under watter: Taake thee caammeerraa ttoo aa FFUUJJIIFFIILLMM--aauutthhoorriizzeedd sseerrvviiccee tteecchhnniicciiaann ffor rreeppaaiirrss.. DDoo nnoott ttuurrnn  
the cameera on.  
Water in the camera  
Power and Battery  
Problem  
Solution  
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
• Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P10).  
• Thhee bbaatttteerry-chamber cover is not latched: Latch the battteerryy-chaambbeerr ccoovveerr ((P10).  
The cameraa does noot  
turn on.  
• Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert  
it in thhe caammeerraa iimmmmeeddiiaatteellyy bbeeffore ttakking a picture.  
• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.  
The battery runs down • Q is selected for shooting mode: Select B mode to reduce the drain on the battery  
quickly.  
(P24).  
• xTRACKING is selected for FAF MODE: Select a different AF mode (P66).  
• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging  
life. Purchase a new battery.  
The cameraa turns ooff  
suddenly.  
Charge the battery or insert a fully--cchhaarrggeedd sspare battery (P7).  
88  
Problems and Solutions  
Problem  
Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P7).  
Charging is slow.  
Charge the battery at room temperaturre (Pvi).  
Solution  
The charging lamp lights, • Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, drry cloth.  
but the battery does not • Thhee bbattery has been charged many times: The battery has reached the end of its charg-  
charge.  
ing life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.  
Menus and Displays  
Problem  
Solution  
Menus and displays are  
not inn English.  
Select ENGLISH for La (P18, 77).  
Shooting  
Problem  
Solution  
• Memory is full: Insert a new memory cardd or deeletee ppictures (P11, 40).  
• Memory is not formatted: Format the memory card orr inteerrnal memory (P78).  
• Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clleeaann tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dry cloth.  
• Thhee memory cardd iiss ddaamaged: Insert a new memory card (P11).  
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
• Thhee ccaamera has turned off automatically: Turn the cammera on (P16).  
• Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until  
the indicattor lammpps turnss off (P3).  
Noo ppiiccture is taken when  
the shutter button is  
pressed.  
The LCD monitor goes  
dark aftter shhooting.  
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P34).  
Troubleshooting  
89  
Problems and Solutions  
Problem  
Solution  
• Thhee ssuubbjjeecct is close to the camera: Select macro mode (P33).  
• Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P33).  
• Thhee ssuubbjjeecct is not suited to autofocus: Use fooccus lock (P30).  
The cameraa does noot  
focus.  
Macro mode is not  
available  
Choose a different shooting mode (P24).  
Intelligent Face Detection  
is not available.  
Choose a different shooting mode (P24).  
• Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove  
the obsttructions.  
• Thhee ssuubject’s face occupies onlyy a smalll area of the frame: Change the composition so that  
the subject’s face occupiees a laarrger area off the frame (P30).  
Noo fface is detected.  
• Thhee ssuubbjjeecct’s head is tilted or horizontal: Ask thee subjectt to holdd ttheir heaad straight.  
• Thhee ccaamera is tilted: Keep the camera leevel (P20).  
• Thhee ssuubbjjeecctt’’ss ffaaccee iiss ppoooorrlly lit: Shoot in bright light.  
Wrong subject is  
selected.  
The selected subject is closer to the center of the frame than the main subject. Recompose the  
picture or turn face detection off and frame the picture using focuus lockk (P30).  
• Thhee flflaasshh iiss nnoott available in the curreenntt sshooting mode: Choose a different shooting mode  
(P24).  
• Thhee bbaattery is exhausted: Charge the battery or insert a fully--cchhaarrggeedd spare battery (P7).  
• Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P65).  
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P77).  
• Thhee flaasshh is off (P): Choose a different flash mode (P34).  
The flash does not fire.  
90  
Troubleshooting  
Problems and Solutions  
Problem  
Solution  
• Thhee ddeessireedd flflaasshh mmooddee iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrreenntt sshhoooottiinngg mmooddee: Choose a different  
shooting mode (P24).  
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P77).  
Some flash modes are  
not available.  
The flash does not fully • Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P104).  
light the subject.  
• Thhee flflaasshh wwiinndow is obstructed: Hoolldd tthhee ccamera correctly (P20).  
• Thhee pprrootteeccttiivvee ggllaassss ccoovveerriinngg tthhee lleennss iiss ddiirrttyy: Clean the glass (P87).  
• Thhee prootteeccttiivvee ggllaassss ccoovering the lens is blockked: Keep objects away from the lens (P20).  
• sis displayyed duringg shootinngg and the ffoocus framme is displlayed in rred: Check fooccus  
before shooting (P94).  
Pictures are blurred.  
• kis displayed during shooting: Use the flash or a tripod (P35).  
This is normaal wheenn slow sshutteer speeeds are seleccted att high tteemmppeerraattuurreess aanndd ddooeess nnoott iinnddiiccaattee  
a malfunction.  
Pictures are mottled.  
Vertical lines appear in The camera has been used continuously at high temperatures. Turn the caammeerraa ooffff and wait for  
pictures. it to cool down.  
“Smear”in the form of Vertical purple or white lines may appear aftteerr tthe ccaammeerraa hhaass bbeeeenn uusseedd ccoonnttiinnuuoouussllyy aatt hhiigghh  
vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD  
lines appears in the  
display.  
image sensors and does not indicate a maalfunctiion. Theese lineess are recorded in movies but do not  
appear in photographs. Avoid framing bright objects when filming movies.  
Sounds made by the  
camera are recorded with Do not adjust zoom during shooting.  
movies.  
Troubleshooting  
91  
Problems and Solutions  
Playback  
Problem  
Solution  
Pictures are grainy.  
The pictures were taken with a differentt mmaakkee oorr mmooddeell ooff ccamera.  
Playback zoom is unavail-  
able.  
The cuurrrreennt piicturee is a reesizedd copy wwith a ssize of a.  
• Playback volume is too low: Adjust playback volume (P80).  
• Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P20, 45).  
• Thhee ssppeaker is obstructed: Hoolldd tthhee ccamera correctly during playback (P47).  
Noo ssoouund in movie  
playback.  
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the deviiccee wwiitthh  
deleted.  
which it was originally applied (P71).  
File numbering is  
The battery-chamber cover was opened while the caammeerraa wwaass oonn.. TTuurrnn tthhee ccaammeerraa ooffff bbeeffoorree  
unexpectedly reset.  
opening thhe baatttteerryy-chamberr ccoovveerr ((P16).  
92  
Troubleshooting  
Problems and Solutions  
Connections/Miscellaneous  
Problem  
Solution  
• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera pproperlly (P48).  
• An A/V cable was connected dduring movie playback: Coonnect thhe caammeerraa oonnccee mmoovviiee ppllaayy--  
back has ended.  
Noo ppiiccture or sound.  
• Input on the television is set to “TV”: Set input to “VIDEO”.  
• Thhee camera is not set tto the ccoorrrrect vviideo sttaannddaarrd: Match the camera QVIDEO SYS-  
TEM setting to the TV (P83).  
• Thhee vvoolume on the TV is too low: Adjust the volume.  
Noo coolor  
Match the cammera QVIDEO SYSTEM setting to the TV (P83).  
The computer does not  
recognize the camera.  
Be sure the cameraa and coomputter aree correctly connected (P57).  
Pictures caan not bbe  
printed.  
• Thhee ccaamera is not prooppeerrlly connectedd: Connect the camera ccorrecttly (P49).  
• Thhee pprrinter is off: Turn the printer on.  
Only one copy is printed/  
the date is not printed.  
The printer is not PictBriidge commpatible.  
• Temporary camera malfunction: Remove and reinsert the battery (P9).  
• Thhee bbaatttery is exhausted: Charge the battery (P7) or iinsert a ffully-charged spare bbattery  
(P9).  
The cameraa is unree-  
sponsive.  
The cameraa does noot  
function as expected.  
Remove and reinsert the battery (P9). If the problem persists, contact your FUJIFILM dealer.  
Noo sound.  
Turn silent mode off (P77).  
Troubleshooting  
93  
Warning Messages and DDissplays  
The following warnings are displayed in the LCD monitor:  
Warning  
B(red)  
A(blinks red)  
k
Description  
Low batttery. Charge the battery (P7) or iinsert aa fullyy-charged spare battery (P9).  
Battery eexhausteed. Charge the battery (P7) or inseert a fullly-charged spare battery (P9).  
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.  
The camerra caann nnoott ffocuuss.. TTrryy oonnee ooff tthhee ffolllowinng solutions:  
• Use fooccuss lock to focus on annother suubject at the same distance, then recompose the picture  
(P30).  
s
(displayed in red with red  
focus frame)  
• Use macro mmode ttoo focus wwhenn ttaakking cloose-upps (P33).  
r
The subjject iss too brrightt oor too ddark aannd the ppicturre wwiillll bbee oovveerr-- oorr uunnddeerr--eexxppoosseedd.. IIff tthhee ssuubbjjeecctt  
is dark, use the flash (P34).  
Aperture or shutter speed  
displayed in red  
FOCUS ERROR  
TURN OFF THE CAMERA  
AND TURN ON AGAIN  
Camera malfunction. Turn the caamera offff and then on again, takiinngg ccaarree nnoott ttoo ttoouucchh tthhee lleennss.. IIff  
the message persists, contact a FUJIFILM dealer.  
• Thhee mmemory cardd oorr iinntteerrnnal memory is not formmatted orr thhee mmeemmoorryy ccaarrdd was foorr--  
matted in a computer or other device: Format the memory card orr internal memory using  
the KFORMAT option in the camerra setup mmenu (P78).  
• Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dryy clotth. If  
the message is repeated, format the card (P78). If the message persists, replace tthhee ccard.  
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
CARD NOT INITIALIZED  
PROTECTED CARD  
BUSY  
The memory caard is locked. Unlock the ccard (P11).  
The memory caard is inncorrecctly formatted. Use the caamera too format the caard (P78).  
94  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
The memory card iss not formatted for use in the camera. Format the carrd (P78).  
The memory carrd contaccts requiire cleaniing or the memory card is daamaged. CClean the contacts  
with a softt,, ddrryy cclloth.. If the meesssage is reepeated, foorrmmaatt tthhee ccard (P78). If the message persists,  
replace the card.  
CARD ERROR  
Incompatible memory card. Usse a compatible card (P14).  
Camera malfunction. Contact a FUJIFILM dealer.  
aMEMORY FULL  
bMEMORY FULL  
INTERNAL MEMORY IS  
FULL  
The memory carrd or intternal memory is full and pictures ccan not be recorded oorr copiieedd.. DDeelleettee  
pictures or insert a memory caard withh more free space.  
INSERT A NEEW CARD  
• Memory caard erroorr oorr ccoonnnneeccttiioonn eerrrroorr: Reinsert tthhee ccard oorr ttuurrnn tthhee ccaammeerraa ooffff aanndd tthheenn  
on again. If the message persists, contact a FUJIFILM dealer.  
• Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert  
a memory cardd with moore freee space.  
• Thhee memory cardd oorr iinntteernal memory is not fformattted: Format the memory card or  
internal memory (P78).  
• Thhee fifillee iiss ccoorrupt or was not creeaatteedd with the camera: The file can nnot be viiewed.  
• Thhee mmemory cardd ccoonntacts reeqquuiirree cclleeaanniinngg: Clean tthhee ccoonnttaaccttss wwiitthh aa ssoofft, dryy clotth. If  
the message is repeated, format the card (P78). If the message persists, replace tthhee ccard.  
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.  
WRITE ERROR  
READ ERROR  
Troubleshooting  
95  
Warning Messages and Displays  
Warning  
Description  
The caammeerraa hhaass rrun out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee  
memory caard annd select RENEW for BFRAME NO. in the setup menu. Take aa ppiiccttuurree  
to reset frame numbering to 100-0001, then select CONTINUOUS for BFRAME NO  
(P79).  
FRAME NO. FULL  
PRESS AND HOLD  
THE DISP BUUTTON TO  
DEACTIVATE SILENT MODE  
An attempt was made to choose a flash mode or aadjust the volume witth the caammeerraa iinn ssiilleenntt  
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P77).  
A search has returned more than 5,000 rreessuullttss,, oorr mmoorree tthhaann 999999 ffrraammeess wweerree sseelleecctteedd ffoorr ddeellee--  
tion. Peerform aa differeent searrch or seeleecctt ffeewer picctures.  
TOO MANY FRAMES  
PROTECTED FRAME  
aCAN NOT CROP  
CAN NOT CROP  
An attempt was made to delete to a protected picture. Remove protection and try again (P71).  
apictures can nott be croopped.  
The picture is damaged or was not createedd wwiitthh tthhee ccamera.  
PCANNOTT EXECUTE  
QCANNOTT EXECUTE  
aCANNOTT EXECUTE  
CAN NOT ROTATE  
An attempt was made to create a resized copy at a size equal to or larger than the original.  
Choose a smaller size.  
An attempt was made to rotate a picture that can not be rotated.  
FCAN NOT ROTATE Movies can not be rotated.  
CANNOT EXECUTE  
FCANNOT EEXECUTE  
Retouch and red-eye removal are not available wwiitthh mmoovviieess,, ppiiccttuurreess ttaakkeenn wwiitthh ootthheerr ccaammeerraass,,  
or pictures that can nott be playyed back.  
96  
Troubleshooting  
Warning Messages and Displays  
Description  
Warning  
Noo mmeemmoorryy ccaarrdd iinnsseerrtteedd wwhheenn ECOPY is selected in the playback menu. Insert a memory  
card.  
NO CARD  
bNO IMAGE  
aNO IMAGE  
The souurce seelecteedd ffor ECOPY contains no images. Select a different source.  
The DPOF print order on the current memory caarrdd ccoonnttaaiinnss mmoorree tthhaann 999999 iimmaaggeess.. CCooppyy tthhe  
pictures to internal memory and create a new print order.  
DPOF FILE ERROR  
CAN NOT SET DPOF  
The picture caan not be pprintedd uusing DPOF.  
FCAN NOT SET DPOF Movies can not be printed using DPOF.  
A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other  
device. Confirm that the device is turned on and that the USB caable iss conneected.  
Printer oout of papeer or ink, or other printer error. Chheck pprriinter (see printer manual foorr ddeettaaiillss))..  
To resume printing, turn the printer off and then turn it back on.  
COMMUNICATION ERROR  
PRINTER ERROR  
PRINTER ERROR  
RESUME?  
Printer out of paper or ink, or other pprriinntteerr eerrrroorr.. Check printer (see printer manual for details). If  
printing does not resume automatically, press MENU/OK to resume.  
An aatttteemmpptt wwaass mmaaddee ttoo pprriinntt aa mmoovviiee,, aa ppiiccttuurree nnoott ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa  
format not supported by the printer. Movies and some picturres creatted with oother devvices caann  
CANNOT BE PRINTED not be printed; if the picture is a ssttiillll ppiiccttuurree ccrreeaatteedd wwiitthh tthhee ccamera, check the pprriinntteerr mmaannuuaall  
to confifirm that the priinterr ssupports thhe JFIIFF-JPEGG or Exxif-JPEG foorrmmaatt.. IIff iitt ddooeess nnoott,, tthhee ppiiccttuurreess  
can not be pprinted.  
Troubleshooting  
97  
Appendix  
Tips and Tricks  
The following tips and tricks will help you get the most from your camera.  
Battery Performance  
Choose the following settings for improved battery performance:  
• bFACE DETECTION (P65): OFF  
• FAF MODE (P66): r CENTER  
• qLED ILLUMINATOR (P66): OFF  
• ELCD MODE (P81): UPOWER SAVE ON  
• LDUAL IS MODE (P81): OFF  
Thhee SSeellff-timer  
• To prevent blur caused by the camera moving when the shutter button is pressed,  
use the two-second timer.  
• To take a group portrait that includes the photographer, use the group timer. The timer  
will not start until the person who has pressed the shutter button appears in the  
frame.  
98  
Tips and Tricks  
Intelligent Face Detection  
When ON is selected for bFACE DETECTION (P65), you can:  
• Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-  
AGE DISP. (P78).  
Shooting  
• Remove red-eye by selecting ON for BRED EYE REMOVAL (P81).  
• Zoom in on faces during slide shows (P70) or by pressing the selector  
down during playback.  
Playback  
• Search for faces using bIMAGE SEARCH (P41).  
• Crop the background from portraits using GCROP (P72).  
• Print one copy for each person in the photo.  
Printing  
Appendix  
99  
Tips and Tricks  
Proo TTips  
• To photograph the same scene both with and without the  
flash, select CNATURAL & N for ASHOOTING MODE  
(P24). Use multi-frame playback (P39) to compare the two  
shots.  
• To photograph subjects that are in motion, select xTRACK-  
ING for FAF MODE (P66).  
• To photograph poorly-lit subjects close to the camera, select  
ON for qLED ILLUMINATOR (P66).  
• To fine-tune brightness of a photograph, select P PROGRAM  
AE (P24) for ASHOOTING MODE, choose an appropriate  
white balance option (P64), and adjust exposure compensa-  
tion (P32).  
100  
Appendix  
Innteerrnnaall MMeemmoorryy//MMeemmoorryy CCaarrdd CCaappaacciittyy  
The following table shows the recording time or number of pictures available  
at different image sizes. All figures are approximate; file size varies with the  
scene recorded, producing wide variations in the number of files that can be  
stored. The number of exposures or length remaining may not diminish at an  
even rate. A limited number of test pictures can be taken when no memory  
card is inserted.  
Medium Internal memory  
2 GB  
NORMAL  
4 GB  
NORMAL  
8 GB  
NORMAL  
O
(apprrox. 10 MB)  
T
FINE  
1
2
3
3
NORMAL  
2
3
5
7
FINE  
320  
410  
630  
820  
FINE  
640  
830  
1260  
1640  
2860  
4150  
FINE  
1290  
1680  
2540  
3290  
5740  
8330  
O4:3  
O16:9  
P4:3  
P16:9  
Q4:3  
Q16:9  
h1280†  
550  
780  
1100  
1540  
2350  
2830  
1100  
1570  
2200  
3090  
4710  
5680  
2210  
3160  
4420  
6200  
9450  
11400  
6
9
11  
13  
1420  
2070  
1sec.  
6sec.  
11min.  
28min.  
24min.  
58min.  
48min.  
116min.  
f
* Individual movie files can not exceed 2 GB in size.  
†Use a G card or better when shooting HD movies.  
Appendix  
101  
Specificcaattions  
System  
Model  
Effective pixels  
CCD  
Digital Camera FinePix XP20 Series  
14.2 million  
/
12.3-in. square pixel CCD with primary color filter  
Storage media  
File system  
• Interrnal meemory (approx. 10 MB)  
Compliant with Desiggn Rulee for Camera File System (DCF), Exif 2.3, and Digital Print Order  
Format (DPOF)  
• SD/SDHC/SDXC memory cards  
File format  
• Still ppicturres: Exif 2.3 JPEG (compressed)  
• Movies: AAVI-fformat Motion JPEG  
Image size (pixels)  
• O4 : 3: 4,320 × 3,240  
• P4 : 3: 3,072 × 2,304  
• Q4 : 3: 2,048 × 1,536  
• O16 : 9: 4,320 × 2,432  
• P16 : 9: 3,072 × 1,728  
• Q16 : 9: 1,920 × 1,080  
Leens  
Fujinon 5 × opticall zoom lens,, F3.99 (wide angle) – F4.9 (telephoto)  
Focal length  
Digital zoom  
f=5.0 mm–25.0 mm (35-mm forrmat equivalent: 28 mm–140 mm)  
• 4 : 3: Approx. 6.8 × (upp to 34 ×× whenn ccombinned witth opttiical zoom)  
• 16 : 9: Approx. 5.1 × (uup to 255 × whenn combiined wiith opttical zoom)  
Aperture  
F3.9/F6.2 (wide angle), F4.9/F8.0 (telephoto)  
Focus range  
(distance from front of lens)  
Apppprrooxx.. 6600 ccmm ((22..00 fft.)–infinityy (wide angle); 1.0 m (3.33 fft..)–infinity (telephoto)  
•
Maaccrro: approx. 9 cm–80 ccmm//33..55 iinn..––22..66 fft. (wide angle); 40 cm––8800 ccmm//11..33 fftt..––22..66 fftt.. (telephoto)  
102  
Appendix  
Specifications  
System  
Sensitivity  
Metering  
Sttaannddaarrdd ooutput sensitivity equivalent to ISO 100,, 200, 4000, 800, 11600, 322000; AUTO  
256-segment through-the-lens (TTL)  
Exposurre control  
Programmed AE  
/
Exposure compensation –2 EV – +2 EV in increments of 13EV  
Image stabilization  
Shutter speed  
(combined mechaniccal and • Other modes: 4 s–12,000s  
Optical staabilization  
/
/
• AUTO mode: 14s–12,000s  
/
electronic shutter)  
Coonnttinuous  
Focus  
Up to 0.8 fps, max. 3 frames  
• Mode: Sinngle AF  
• Focus--area selection: CENTER, TRACKING  
• Autofoocus syystem: Contrast-detect TTL AF  
White balance  
Automatic scene detection; six manual preset modes foorr ddiirreecctt ssuunnlliigghhtt,, sshhaaddee,, ddaayylliigghhtt flfluuoorreess--  
cent, warm white fluorescent, cool whittee flfluuoorreesscceenntt,, aanndd iinnccandescent  
Appendix  
103  
Specifications  
System  
Self-timer  
Flash  
Off, 2 sec., 10 sec., a (COUPLE TIMER), g (GROUP TIMER)  
Auto flash; effective range when sensitivity is set to AUTO is approx. 700 ccmm––33..11 mm//22..33 fft.–  
10.22 fft. (wide aanglee), 70 cm––22..77 mm//22..33 fftt..––88..99 fftt.. (telephoto); effffective raange in maccro moode is  
approx. 30 ccmm––8800 ccmm//11..00 fftt..––22..66 fftt..  
Flash mode  
Auto, filll flashh, off,, sslow ssyync (reed-eyee remmooval off); aauto with reed-eyyee removvaall,, fifillll flflaasshh wwiitthh rreedd--  
eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)  
LCD monitor  
Movies  
2.7-in., 230 k-dot color LCD monitor; frame coverage approx. 96 %  
Frame size h1280 (1,280 × 720) or f(640 × 480); 30 fps; monaural sound  
Languages  
Arabic, Buulgariian, Siimmpplliififieedd CChhiinneessee,, TTrraaddiittiioonnaall CChhiinneessee,, CCzzeecchh,, DDaanniisshh,, DDuuttcchh,, EEngllish, FFarrssii,,  
Finnish, French, Geerman, Greeek, Hebrew, Hunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,  
Korean, LLatvian, Lithuanian, Noorrwweeggiiaann,, PPoolliisshh,, PPoorrttuugguueessee,, RRoommanian, Russian, Serbian,  
Slovak,, Sppaanniisshh,, SSwweeddiisshh,, TThhaaii,, TTuurrkkish, Ukkrainian, Vietnamese  
Input/output terminals  
A/V OUT  
NTSC or PAL output with monaural sound  
(audio/video output)  
Digital input/output  
USB 2.0 High-Speeed; sharees A/V OUT cconnector, MTP/PTP  
104  
Appendix  
Specifications  
Power supply/other  
Power suppplly  
NP-45A rechargeable battery  
Battery life (approximate  
numberr of fraames thhaatt ccan  
be takeen withh a fullly-charged  
battery)  
Battery type  
NP-45A (type supplied with cammera)  
Approoximate number of frames  
200  
CIPA standdard, meeaasured inn B (auto) mode using battery supplied with caamera andd SD mem-  
ory card.  
Notte: NNumbeerr of shots thaat can bbee ttaakkeenn wwiitthh bbaatttteerryy vaariess wwiitthh bbaatttteerryy cchhaarrggee lleevveell aanndd wwiillll  
decline at low temperatures.  
Caammeerra dimmensions  
99.2 mm × 67.7 mm × 23.1 mm/3.9 in. × 2.7 in. × 0.9 in., excluding projections  
(W × H × D)  
Caammera wweight  
Shooting weight  
Operating conditions  
Approx. 145 g/5.1 oz., excluding battery, accessories, and memory card  
Approx. 162 g/5.7 oz., including battery and memory card  
• Temperratuurre: –10 °C – +40 °C/+14 °F – +104 °F  
• Humidity: 10% – 80% (no condensation)  
Appendix  
105  
Specifications  
NP-45A rechargeable battery  
Noommiinnaall voltage  
Noommiinnaall ccaappaacciitty  
DC 3.7V  
720 mAh  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.6 in. × 0.2 in.  
Weight  
Approx. 15.5 g/0.5 oz.  
BC-45B battery charger  
Rated input  
Input capacitty  
100V–240V AC,, 5500//6600 HHz  
6.0V (100 V/240VA)  
Rated output  
4.2V DC, 550 mA  
Supported batteries  
Charging time  
NP-45A rechargeable batteries  
Approx. 120 minutes (+20 °C/+68 °F)  
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F  
Dimensions (W × H × D) 46 mm × 91 mm × 23 mm/1.8 in. × 3.6 in. × 0.9 in., excluding projections  
Weight  
Approx. 65 g/2.3 oz., excluding battery  
Weight and dimensions vary with the country or region of sale.  
106  
Appendix  
Specifications  
■ Noottiices  
• Specifications subject to change without notice. FUJIFILM shall not be held liable for  
damages resulting from errors in this manual.  
• Although the LCD monitor is manufactured using advanced high-precision technol-  
ogy, small bright points and anomalous colors may appear, particularly in the vicinity  
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-  
tion; images recorded with the camera are unaffected.  
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,  
electric fields, static electricity, or line noise).  
• Due to the type of lens used, some distortion may occur at the periphery of images.  
This is normal.  
Appendix  
107  
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN  
http://www.fujifilm.com/products/digital_cameras/index.html  
Restrictions on Camera Settings  
The options available in each shooting mode are listed below.  
Shooting Mode  
Option  
Q
B P  
✔ ✔ ✔  
C
D
L Z M rN O  
H
QR S F t s U V  
✔ ✔ ✔ ✔ ✔ ✔1  
W
F
AUTO  
N
✔ ✔  
✔ ✔  
✔ ✔  
✔ ✔  
✔ ✔  
✔ ✔  
✔
BOFF  
✔ ✔ ✔ ✔1  
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔
O
K
✔ ✔  
1
N
✔ ✔ ✔  
✔ ✔  
✔
BON L ✔ ✔ ✔ ✔1  
✔ ✔ ✔  
✔ ✔  
M
✔
P
✔ ✔ ✔  
✔1 ✔ ✔ ✔1 ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔1 ✔ ✔  
S/R ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
a/g ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
h
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1
F
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1  
✔
✔1 ✔1  
F
1
H
✔
d
✔
✔1 ✔1 ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1  
AUTO  
3200  
1600  
800  
400  
200  
✔
✔
✔
✔
✔
✔
N
O
100  
O
P
Q
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
T
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
Restrictions on Camera Settings  
Shooting Mode  
L Z M rN O QR S F t s U V  
Option  
Q
B P  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
C
D
H
W
F
c
a
b
f
✔ ✔ ✔ ✔  
P
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
D
✔
✔ ✔ ✔  
✔ ✔ ✔  
✔
ON  
OFF  
ON  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
R
b
F
V
✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔  
✔
✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔ ✔1 ✔1  
✔ ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1  
✔ ✔  
OFF  
r
x
h1280  
f
✔
✔
q
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
l
m
OFF  
L
D
M
B
E
✔2 ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
1 Automatically optimized for selected shooting mode.  
2 OFF only.  

Baxi Potterton 24 User Manual
Black Decker BLP7600SB User Manual
Bushnell ImageView 11 8200 User Manual
Canon Powershot Elph 110 Hs Compact Camera 6036B001 User Manual
Casio fx 7400GII User Manual
Cowon Systems Cowon J3 User Manual
Crown Boiler 32 475ECS User Manual
Denon DBP 2010 User Manual
Eclipse Fujitsu Ten Car Stereo System CD5405 User Manual
Insignia S BRDVD4 CA User Manual