PRODUCT DATASHEET
Asia Pacific Region
+852‐31026623
ENERGIZER NH12-1000
AAA
Specifications
Classification:
Chemical System:
Rechargeable
Nickel-Metal Hydride (NiMH)
Designation:
Nominal Voltage:
Rated Capacity:
IEC-HR03
1.2 Volts
1000 mAh (to 1.0 volts)
Industry Standard Dimensions
Based on 200 mA (0.2C) discharge rate
(millimeters)
Typical Weight:
Typical Volume:
Jacket:
12.0 grams
3.8 cubic centimeters
Plastic Label
10.50
9.50
0.80
Minimum
3.80
Maximum
Internal Resistance:
The internal resistance of the cell varies
with state of charge, as follows:
Cell Charged
100 milliohms
Cell 1/2 Discharged
120 milliohms
44.50
43.30
(tolerance of ±20% applies to above values)
AC Impedance (No Load):
The impedance of the charged cell varies
with frequency, as follows:
4.30
Minimum
Frequency (Hz)
1000
Impedance (milliohms)
Typical Discharge Characteristics
(Charged Cell)
35
Typical Performance at 21ºC
1.4
Above values based on AC current set at 1.0 ampere.
Value tolerances are ±20%.
1.3
1.2
1.1
1.0
0.9
100 mA
(0.1C)
200 mA
(0.2C)
Operating and Storage Temperatures:
To maintain maximum performance, observe the following
general guidelines regarding environmental conditions.
0
3
6
9
12
Charge:
Discharge:
0ºC to 40ºC
0ºC to 50ºC
Hours of Discharge
Storage: -20ºC to 30ºC
Humidity: 65±20%
Typical Performance at 21ºC
1.4
1.3
1.2
1.1
1.0
0.9
Operating at extreme temperatures,
will significantly impact battery cycle life.
0.5 A
(0.5C)
1.0 A
(1.0C)
2.0 A
(2.0C)
0.0
0.5
1.0
1.5
2.0
2.5
Hours of Discharge
Important Notice
This datasheet contains typical information specific to products manufactured at the time of its publication.
©Energizer Holdings, Inc. - Contents herein do not constitute a warranty.
Form No. EBC - 8918AP-A
Page 1 of 1
|