ENGLISH
Directions for safety
Package Contents
1. Remote control
2. Battery
3. Power cord
5. Manual
4. Installation CD
Directions for use of remote control
▶ Corrosion from old batteries can cause remote to malfunction
▶ Use with clear path between remote and remote control sensor on display
▶ Keep remote away from physical damage
▶ Please use caution when handling or disposing of battery cells, small objects can cause choking hazard in
children
3
4
ENGLISH
Specification of products
Location and Function of Features
46"
768 x 1366
16.7M - 8Bit
700 cd/㎡(Typ)
2000 : 1
<Speaker>
Only audio included in movie
available, AC3 codec
Audio file is not available.
[Option]
8ms
(+)178' ~ (-) 178'
Stereo Sound
2W
USB2.0
170W
uCLinux
AVI (Codec : MPEG 1/2/4, Xvid, Dvix)
AC3, MP3
<AC power socket >
JPEG
Insert Power cord and connect power.
0˙ ~ 50˙
20~90% (Non-condensing)
-20˙ ~ 60˙
<USB socket >
<Power switch>
5~90% (Non-condensing)
1G (Default)
Photo Sensor
Insert USB device and upload contents .
Power On/Off.
Additional
5
6
ENGLISH
Remote control functions
Basic setup
1. Initial Screen
⑥
⑤
③
①
- Insert power cord into AC power Socket
- Plug power cord into electrical outlet
- Turn on Power Switch
- Screen will light and display a Working Message
- If content has been previously loaded onto DOM
(internal memory) content will play automatically
⑧
⑦
④
②
2. Screen setup
Power ON/OFF.
- Only available with remote control
- In Play mode, SETUP button changes OSD menu in order of Brightness > Contrast > Saturation
- If appropriate OSD menu displays, its value can change by VOL “+”, “-” button.
- If no events for 3 seconds after adjusting value, setup menu automatically disappears.
Display OSD menu
※
In Play/Pause mode, the order is BRIGHTNESS
In Stop mode, displays network setup menu.
→
CONTRAST
→
SATURATION.
In OSD menu, moves menu bar and confirms
Controls volume & screen setup (Adjusts menu values displayed on SETUP)
Brightness 16
※
※
※
In movie & image play mode, adjusts Volume value.
Contrast
16
Adjusts menu values displayed on SETUP
VOL “+” , “-” SETUP
If no events for 3 seconds after adjusting value, setup menu automatically
Saturation 16
Displays screen information
3. Volume setup
※
Displays interval value of slide show, version, file size, file name and etc.
Converts replay mode when pressing INFO button once again.
※
- Only available with remote control
- In Play mode, “+” or “-” button shows volume setup menu.
Play(active -> inactive)
- Displayed volume value is the value after setup by “+” or “-” of VOL button
Ex: If you press “+” button in volume value 16 initially set, displayed volume value can be 17.
※
Enter Pause mode when pressing Play button in active mode.
※
In Pause mode, refreshes up/down/right/left in every hour.
Stop(inactive -> active)
Player Volume 16
Input numbers in OSD menu.
VOL “+” , “-”
7
8
ENGLISH
Content Upload
Content Upload
Content Upload
How to upload content
- Image of download screen appears below.
1. Download content in a compatible file format from computer to a USB Flash Drive (see template below).
- When preparing Content on USB Flash Drive please make sure only supported file formats reside
- Content will be read and transferred to the DOM(internal memory)
- When new content is loaded, old content will be erased automatically. Old content can also be cleared prior
to new download using the remote control.
Compatible File Formats
AVI (MPEG 1/2/4, Xvid, Dvix)
JPEG
Single File only not to exceed memory capacity
Multiple Files, not to exceed memory capacity.
- Remote control and other functions are not usuable during downloads.
<Automatic Download in progress >
Ongoing state of download
File size and nuber
USB Flash Drive must contain only the compatible file/files for loading. Additional
content can cause memory errors
File name
Note: when using multiple JPEG files, files must be named sequentially
- ie: Flower01; Flower02; Flower03; etc.
2. Turn device on, if no content has been loaded screen will say "Wating for events", if content
has been previously loaded it will run automatically
Download time of current File
Accumulated download time of all files
Estimated left time of current file
Download speed of current file
3. To load new content insert USB Flash Drive into USB port on device
4. Download will begin automatically (Old content will be deleted)
5. When download is complete screen will say "Plz defach USB device".
<Automatic Download finished>
6. Once USB device is removed, system will reboot then automatically play new content.
Screen will say "waiting for events "while reboot is in progress.
Remove USB device after this message -> Automatic restart and play.
9
10
|