Cowon Systems cell phone User Manual

User’s Guide  
3
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
Be careful not to cut your  
hands when unpacking  
the box, User’s Guide,  
or accessories.  
Do not use iAUDIO for purposes  
other than specified here in the  
User’s Guide.  
Do not let the unit get wet or  
leave it in a damp place for prolonged  
periods. If the product  
There are no user  
serviceable parts in the unit,  
and any attempt to open,  
disassemble or reconstruct  
the product will void any  
warranty, disqualify it for free  
service, and the unit may be  
permanently disqualified from  
any after service.  
is damaged from moisture  
as described above,  
product failure is then classified as  
failure by submersion, and no longer  
covered by warranty. Moreover,  
it may not be even be possible to repair  
the unit with charged for service, and you  
may no longer be able to use the product.  
Pay attention to the directions when  
connecting the USB cable to your  
iAUDIO or a PC.  
Connecting the unit or PC incorrectly  
with the USB cable may damage them.  
Do not bend the USB cable  
excessively or leave it pressed by  
heavy objects.  
Contactourresellerrepresentative  
inyourcountryifyounoticethatthe  
deviceover-heats.  
Touching iAUDIO with wet  
hands may damage the unit  
and cause malfunctions.  
Handle the power plug only  
with dry hands. (Otherwise  
an electric shock may  
occur.)  
Listening to iAUDIO at high  
volumes for extended periods  
may harm your hearing.  
Always backup important files.  
All data stored in iAUDIO may  
become deleted when being  
serviced. Our after-service  
center does not backup files in  
iAUDIO units.  
Please note that Cowon Systems  
is not responsible for any data  
loss from products entrusted to  
us for service.  
Using iAUDIO in places  
with high occurrences of  
static electricity may cause  
malfunctions.  
ENGLISH iAUDIOX5  
4
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
When connecting to a PC, use  
only a USB port on the main  
board or a USB Host card.  
Using an external USB hub does  
not guarantee proper operation.  
(e.g. USB port on a keyboard,  
or an external USB hub)  
Use only the AC power adaptor  
and USB cable provided by Cowon  
Systems Inc..  
To remove iAUDIO when it is  
connected to a cradle or a sub-  
pack via USB cable, the “Safely  
remove hardware” or “Sepa-  
rate or take out hardware”  
If there is thunder or lightning,  
unplug the PC power cables and  
the AC power adaptor from the  
power outlet for there may be  
lightning strikes which cause a  
fire hazard.  
Windows features must be used.  
Use only a soft, dry cotton  
flannel cloth to clean the  
product. (Never use water/  
soap/benzene/detergent.)  
Keep the product away  
from magnets and direct  
magnetic fields, as they can  
cause product failure.  
Do not connect line input/output  
terminals to a cradle (or Subpack)  
and a PC USB port at the same  
time, as it may cause the power to  
turn off. Connect only the neces-  
sary terminal.  
Do not drop or strike the  
product. It may be the direct  
cause of failure, and you  
may not receive free A/S.  
※ The product is a portable storage medium. You must backup important data. The manufacturer is not liable  
for any data loss.  
iAUDIOX5 ENGLISH  
5
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
Bundled Earphones  
iAUDIO (MP3 Player Main Body)  
Install CD (JetShell, JetAudio)  
User’s Guide  
Carrying Case(Optional)  
Subpack  
USB 2.0 Cable, Line-in Recording Cable  
AC Adapter  
Cradle(Optional)  
USB Host Cable  
Playback mode  
Playback field  
LCDDisplay  
Hold (main unit, remote  
control)  
Section repeat  
Current time  
Artist  
Remaining battery charge  
Current track/Total tracks  
Album title  
Song title  
Proceeding bar  
Playback time  
Total timel tracks  
Volume  
BIT RATE  
SAMPLING RATE  
5 Band EQ  
JetEffect  
(BBE, M3B, 3D, MP)  
ENGLISH iAUDIOX5  
6
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
Features  
MP3, OGG, WMA, ASF, FLAC, WAV, MPEG4(video) playback, FM Radio Receiver and Recording  
Voice Recording, Line-In Recording  
TXT(Text), JPEG(Image) File Viewer(Image Enlargement, Background Screen Designation)  
Built-In HDD(20GB/30GB), USB Host, File Copy/Delete  
USB 2.0 Interface  
260,000 Colors TFT-LCD, Resolution 160x128  
Long Playback Time : Maximum 14 hour playback (35 hours for iAUDIO X5L)  
(Based on the company test standards, the playback time may be reduced when using the LCD.)  
Multi language support  
Enhanced Integrated Navigator  
Play/Pause, Recording/Pause While Recording  
Next Song/Previous Song, Fast Forward/Rewind, Infinite Loop, Infinite Loop  
Resume, Fade-In, AutoPlay Features  
Search Speed, Skip Speed Setup  
Volume (Digital 40 Levels)  
Various EQ and Sound Field Effects  
-User-Adjustable 5-Band EQ  
-Normal, Rock, Pop, Jazz, Classic, Vocal, User  
-Supports BBE, Mach3Bass, MP Enhance, and 3D Surround.  
Clock, Alarm, Timer Recording, Sleep Function, Power Saving Exit  
Power, LCD On/Off, Hold Combined Switch  
LCD Auto Off Time Adjustment, Brightness, and Contrast Adjustments  
Easy Downloading and Uploading of Firmware  
Supports ID3V2, ID3V1, FileName  
Device Information Verification  
(Firmware version, HDD capacity, HDD volume, total folder number, total file number)  
Supports MAC OS (Only data transfer is supported)  
Supports Linux v 2.2 or higher (Only data transfer is supported)  
Software  
-JetShell (File transfer, MP3/WMA/WAV/AUDIO CD PLAY, MP3 ENCODING)  
-JetAudio (Integrated multimedia player software, music/video conversion feature)  
Specifications  
Supported Files MP3 : MPEG 1/2/2.5 Layer 3, ~320kbps, ~48khz, mono/stereo WMA(ASF) : ~256kbps, ~48khz,  
mono/stereo OGG : ~q10, ~44.1khz, mono/stereo FLAC : compression level 0/1/2, ~44.1khz,  
mono/stereo WAV : ~48khz, 16bit, mono/stereoXviD MPEG-4, CBR ~256kbps, up to 160x128, 15 fps JPEG  
Hard Disc  
PC Interface  
Battery  
Hard disc (20GB/30GB)  
USB 2.0 (Max. 480M bps)  
Built-in Rechargeable Lithium Ion battery(Max. 14 Hours Continuous Playback)  
AC adapter DC 5.0V, 2A  
Power  
Charge Time  
Buttons  
Approximately 3 hours when using the AC power adaptor (6 hours for iAUDIO X5L)  
Main unit: 5-way Jog(NAVI/MENU, VOL+, VOL-, REW, FF), PLAY, REC, POWER & HOLD switch  
Remote Control: PLAY/PAUSE, FF, REW, MENU, VOL+, VOL-, MODE, REC  
160 x 128 dot, 260,000 color TFT-LCD  
Display  
SNR  
95dB  
Frequency Range 20Hz~20KHz  
Output  
Size  
16 Ohm Earphone: 20mW + 20mW  
iAUDIO X5 : 4.08 X 2.39 X 0.56 inches (103.7 X 60.8 X 14.3 mm) excluding the LCD  
iAUDIO X5L : 4.08 X 2.39 X 0.72 inches (103.7 X 60.8 X 18.3 mm) excluding the LCD  
iAUDIO X5 : 5.11 oz (145g) iAUDIO X5L : 6.35 oz (180g) including the built-in battery  
Weight  
iAUDIOX5 ENGLISH  
7
ꢀꢀꢀꢀꢀ  
1.SimpleOperations  
Different Song  
Playback and Vol-  
ume Adjustment  
Power Off  
1. Connect the earphone tomainunit (whenusingthe remote control, connect it tothe mainunit, andconnect the earphone toremote control).  
2.Alongupwardpushof the powerswitch will turnthe powerON.  
3.The initial screenandthe stand-byscreen(afterlogosetup)will appear(youmaymake it automaticallyplaybackaccordingtothe setup).  
4. Pressingthe “PLAY” buttonwill playbackthe music.  
5. Move the lever left andright toplaybackdifferent songs. Move the leverupanddowntoadjust the volume.  
6.Alongupwardpushof the powerswitch will turnthe powerOFF.  
- You may not turn the power OFF while recording.  
- Turning the power ON while the adapter is connected will activate the charging mode and the stand by screen will appear.  
- Turning the power OFF while the USB is connected will activate the charging mode using USB power.  
- However, when a USB hub is used, the USB charging mode is not supported.  
2.BasicOperationsforSwitchingModes  
e.g.SwitchingfromDigitalAVModetoFMRadioMode:  
EntertheMenu  
Presstheleverforalong  
timetoenterthemenu.  
ModeSelection  
Pushleverinthe+,-directiontomoveupanddowntodifferentmenuitems.Pressthe  
leverorpushthelevertothe ▶directiontoselectamenu.  
Pushthelevertothedirectiontomovetothepreviousstep.  
There are 6 modes (Digital AV, FM Radio, Voice Rec, Line-In Rec, Picture, USB Host).  
To enter the desired mode, press and hold the lever for approximately 2 seconds. When the Menu screen  
appears, push the lever in the +,- direction to switch to a desired menu item. After moving the cursor to  
the desired menu, you may press the lever, playback button, or push the lever in the direction to display  
the selected menu screen. To exit the mode menu, simply press the “REC” button or push the lever in◀  
direction to return to previous screen.  
Press the “REC” button if you want to cancel the action on the mode switch screen and return to the original  
mode.  
ENGLISH iAUDIOX5  
8
ꢀꢀꢀꢀꢀ  
3.BasicOperationsforUsingMenu  
e.g.ChangingJetEffectEQfromNOR(Normal)toROC(Rock):  
JetEffect  
Display  
Timer  
General  
Recording  
FM Radio  
DigitalAVMode  
EntertheMenu  
Holdandpresstheleverfor2  
secondstoenterthemenu.  
MovingupandDownthemenuitems  
Pushthelevertowardthe+,-direction.  
Highlightsettingsandpressthe  
levertoenterthesettingsmenu.  
PlayMode  
Display  
BBE  
BBE  
6
8
6
8
Mach3BA/Ss  
MP Enhance  
3D Surround  
Pan  
Mach3Bass  
MP Enhance  
3D Surround  
Pan  
Timer  
ON  
6
ON  
6
General  
Recording  
FM Radio  
0
0
MenuItemSelection  
MenuItemSelection  
SelecttheEqualizermenuusingthesame  
method.  
EQItemMovement  
ExitafterselectingROCEQ  
Movethelevertowardthedirectionorpress  
theplaybackbutton.  
Presstheleverorpushthelevertowardthe  
directiontoenterthesubmenuofthe  
selectedmenu.  
Pushthelevertowardthe+,-direction.  
YoumayselectROCEQbypushingthelever  
towardthe-directionwheninNORmode.  
5Band dB Level Adjustment  
Youmayadjustthe5BanddBlevelbyashort  
tapontheleverorbypushingthelevertoward  
thedirection.  
Menu Item Value Adjustment  
For the lowest item, enter the setup screen of the item.  
Push the lever toward the +, - direction to adjust the value to the desired level.  
Press the lever to select the item. The adjusted value will be reflected immediately.  
Press the “PLAY” button and return to the mode screen after setup is complete.  
Canceling Menu Item Setup, Closing the Menu Screen  
Pressing the “REC” button will return the item value that is being setup to its previous status and close  
the menu screen.  
4.BasicOperationsforUsingtheNavigator  
Entering  
theNavigator  
Ashort-taponthelever  
allowsyoutoenterthe  
Navigatorscreen.  
NavigatorItemSelection  
SelectedFilePlayback  
iAUDIOFolderstructure  
Movingupand  
Ifyouselectandopenafolder,pressthe  
levertolaunchthepopupwindowandthen  
selectExpand.  
Oryoumayenterthefolderwithoutthepopup  
windowbypushingthelevertowardthe▶  
direction.  
WhenyouselectPlaynowafterpressing  
thePLAYbuttonorbypressingtheleverto  
launchthepopupwindow,thedevicereturns  
toMP3Playermodeandtheselectedfileis  
playedback.  
downthroughthe  
Navigatoritems  
Pushthelevertoward  
the+,-direction.  
Lightlytapthelevertowardthedirectionand  
theselectedfilewillbeplayedbackinNavigator.  
Opening the Navigator Screen  
When in Digital Av, Voice Rec, LineIn Rec, or Picture mode, the Navigator opens to search folders  
and files inside  
In FM Tuner mode, the Navigator for searching and setting frequency values opens.  
USB Host mode is in the Navigator screen by default.  
Navigator Item Selection  
For the selected file item, you may playback the file by pressing the “PLAY” button or moving the  
lever toward the direction.  
For the selected folder item, you may enter the folder by pressing the “PLAY” button or moving the  
lever toward the direction.  
iAUDIOX5 ENGLISH  
9
ꢀꢀꢀꢀꢀ  
Navigator Popup Window  
When you press the lever, the appropriate popup window opens according to the Folder, File, Dynamic  
PlayList File, or Radio Mode.  
Push the lever toward the +, - direction to select the desired popup item.  
Press the “PLAY” button or push the lever toward the direction to select a popup item.  
Press the “REC” button to cancel and close the popup window.  
Closing Navigator  
Pressing the “REC” button will close the Navigator screen and return to the original screen.  
1.DigitalAVMode(Multi-MediaFileandTextViewerOperation)  
Digital AV mode is the mode for playback of audio files and video files or viewing text files saved in hard disk.  
Multi-Media File Playback  
1. Turn the power ON, after both the initial screen and the logo screen appear, the stand-by screen  
with basic information appears.  
2. Press the “PLAY” button to playback audio files or encoded video files.  
3. Pressing the “PLAY” button during playback will pause the file.  
4. Lightly tapping the lever in one direction (left or right) during playback will playback a different song.  
5. Pushing and holding the lever in one direction (left or right) during playback will search songs.  
- When AutoPlay is On, the file plays back while the screen appears at the same time.  
- When Resume is On, playback starts from the section last played.  
- Move the lever toward the +, - direction to adjust the volume.  
- Song information displayed during playback depends on the Song Title setting.  
- It may take several seconds to playback a selected song due to characteristics of the hard disk. This is not a product failure.  
- If there are many files saved, it may take time to display the screen, and is not a product failure.  
- The maximum recognizable number of folders is 1999, and the maximum number of files is 9999 (only audio and video files that  
can be played back, no limitation for other files.) in Digital AV mode. Maximum allowable characters for a file name is 52, any  
letters after those 52 will be cut off.  
- Normal operation is not guaranteed for video files that have not gone through the encoding process via JetAudio.  
ENGLISH iAUDIOX5  
10  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
TextViewer Operation  
1. Connect iAUDIO to a PC with the USB cable.  
2. Save the text file you want to see in iAUDIO to the “TEXTFILE” folder in iAUDIO.  
3. Disconnect iAUDIO and the PC.  
4. Turn the power ON and select a text file saved in the “TEXTFILE” folder with the Navigator.  
This will enable text file viewing.  
5. Moving the lever +, - will move the text line by line, and moving the lever with ,will move  
the text page by page.  
6. Press the lever to launch a separate window and move directly to a specified location.  
7. Press the “REC” button to exit TextViewer mode.  
- You may view the text file while listening to music.  
- Save text files only in the “TEXTFILE” folder.  
- Image files will be recognized up to 128KB, and the maximum number of folders that files can be saved in is 49, and the maximum  
number of files is 99 (total file number under “PICTURE”).  
Section Repeat Setup  
Section Repeat is a feature that allows the user to setup a section he/she wants to listen to and playback in the  
selected range.  
◀▶  
1. In Digital AV mode, press the REC (A B) button at the starting point of the section you wish to repeat during  
◀▶  
audio file playback, the (A ) icon will appear in the upper status bar.  
◀▶  
◀▶  
2. Press the REC(A B) button at the end point of the section you wish to repeat, the icon changes to (A B),  
and the selected section will playback repeatedly.  
3. Press the “REC” button again to cancel section repeat.  
- You must select a section that is longer than 1 second.  
- Selecting or searching different songs during section repeat setup will also cancel the section repeat operation.  
- This function only applies to audio files. Section Repeat does not apply to encoded video files.  
Dynamic Play-List (Referred to hereafter as DPL) Setup  
Adding songs to the DPL  
iAUDIOX5 ENGLISH  
11  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
Removing songs from the DPL  
It is a feature that allows the user to easily edit the songs he/she wants in a List and listen to them.  
There is a special folder called “D-PLAYLIST” already on the hard disk, and this folder will not be recognized  
by the computer.  
The user may add/delete songs he/she wants and enter the “D-PLAYLIST” folder to listen to those songs.  
1. To add songs to the DPL, launch the popup of a song or folder in Navigator, and select “Add To List.”  
2. To remove songs from the DPL, launch the popup of songs you want to remove  
in the “D-PLAYLIST” folder, and select “Remove.”  
- If you add an entire folder to “Add To List,” all of the songs in the folder will be added to the DPL.  
- To remove all songs from “BOOKMARK,” select “Remove All” from the popup window.  
- Removing songs from “BOOKMARK” is simply removing the link not the files. If you want to remove the files, you need to  
delete the files while in USB Host mode or when the device is connected to a PC.  
- The maximum number of files that can be added to the DPL is 200.  
Bookmark Setup  
g
Removing songs from BOOKMARK  
Bookmark is a feature to setup a desired starting point for each song.  
A special folder called “BOOKMARK” is already on the hard disk, and the folder will not be recognized  
by the computer.  
When you setup a bookmark at the desired location for a certain file, you may playback the file at that location  
any time you want.  
1. Move to the “BOOKMARK” folder (the upper most folder using the Navigator) during file playback.  
2. Press “Add Current” in the folder at the place where you want to setup a bookmark and the bookmark  
is setup at that place.  
3. Select the file under “BOOKMARK” to playback the file for which a bookmark has been setup.  
4. To remove songs that have been bookmarked, launch the popup window for the songs you want to remove  
in the “BOOKMARK” folder, and select “Remove.”  
ENGLISH iAUDIOX5  
12  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
- If a file has already been setup for a bookmark, selecting “Add Current” will change the bookmark location to a new starting point.  
- To remove all the songs from the “D-PLAYLIST,” select “Remove All” from the popup.  
- Removing songs from “D-PLAYLIST” is simply removing the link not the files. If you want to remove the files, you need  
to delete the files while in USB Host mode or with the device connected to a PC.  
- The maximum number of files that can be added to BMK is 20.  
- BMK does not support video files.  
Playlist (M3U Playlist) Setup  
A folder called “PLAYLIST” already exists in the upper most folder of the hard disk, and the user may create  
a Playlist (M3U) as he/she prefers. (An M3U file is a list file in which the sequence of audio files is entered.)  
1. To create an M3U file, connect iAUDIO to a PC with the USB cable.  
2. Run the program (JetAudio, WinAmp) that can create M3U files.  
3. Move the files in iAUDIO to each program’s Playlist to edit and save them as M3U files.  
4. Save the created M3U files in the “PLAYLIST” folder in iAUDIO.  
5. Disconnect iAUDIO and the PC.  
6. Turn iAUDIO ON, and then you may playback the M3U files that have been saved in the “PLAYLIST”  
folder using the Navigator.  
- An M3U file is not an audio file. It is only a playlist of audio files. Therefore, deleting an M3U file will not delete the audio file.  
- Be sure to save M3U files only in the “PLAYLIST” folder.  
- You must create an M3U file for the files saved in iAUDIO while iAUDIO is connected to a PC. If you create an M3U file in the PC,  
or create one containing files saved in the PC after the device has been connected to the PC, the M3U file will not playback properly.  
- M3U files will be recognized up to 128KB, and the maximum number of folders that files can be saved in is 99, and the maximum  
number of songs that can be supported in an M3U file is 999.  
2.FMRadioMode(ListeningtoFMRadio)  
FM Radio mode is a mode that allows you to choose the frequency of and listen to radio stations.  
Listening to FM Radio  
1. Turn the product ON and move to FM Radio mode.  
[Please refer to “2) Basic Instructions → 2. Basic Operations for Switching Modes.”]  
2. A Short-tap of the lever toward the , direction will move 0.1Khz each time.  
3. Pushing and holding the lever toward the , direction will automatically search for channels that  
have better reception.  
- If you were listening to the radio before turning the product off, it will resume radio mode when the power is turned on again.  
iAUDIOX5 ENGLISH  
13  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
FM Radio Recording  
1. Turn the product ON and move to FM Radio mode.  
[Please refer to “2) Basic Instructions → 2. Basic Operations for Switching Modes.”]  
2. Move to the desired frequency for recording.  
3. Recording will start when you press and hold the “REC” button at the point at which you want  
to start recording.  
4. Pressing the “REC” button again will stop the recording.  
3.VoiceRecordMode(RecordingVoicewithBuilt-InMic)  
Voice Record mode is a feature that can record voice with the built-in microphone.  
1. Turn the product ON and move to Voice Record mode.  
2. Press the “REC” button to start recording.  
3. Pressing the “REC” button again will stop the recording.  
4. Press the “PLAY” button to playback recorded files.  
- To playback recorded files using features such as search, you may run the files in Navigator using Digital AV mode.  
- If you were running Voice Record before turning the product off, it will resume in Voice Record mode when the power is turned on again.  
- Recording consumes more battery power than usual. Be sure to fully charge the battery before recording.  
- The recorded file can be verified in “VOICE” of the upper most folder.  
- The quality and capacity of the recording depends on the recording quality setup in addition to the reception. Please refer to  
“4. Detailed Description of Features by Menu → 8. Recording.”  
- Maximum capacity for a single recording is 268MB. A new file will be created and start recording if the capacity is exceeded.  
- If there is less than 128MB space available on the hard disk, the recording will not start. If the available space becomes less than  
128MB during recording, the recording will end.  
- Up to 999 files can be recorded.  
ENGLISH iAUDIOX5  
14  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
4.LineInRecordMode(RecordingUsingaStereoCable)  
Line-In Record mode is a feature which allows the user to record sound from another audio device to  
iAUDIO using the stereo cable shipped with the product.  
CDP Playback  
1. Connect the headphone terminal of the CDP to Line-In terminal of iAUDIO with the stereo cable.  
2. Turn the product ON and move to Line-In Record mode.  
3. Pressing the “PLAY” button on the CDP will start the recording from iAUDIO.  
4. Pressing the “REC” button again will stop recording.  
5. To listen to the recorded files, press the “PLAY” button after the earphone is connected.  
- To playback recorded files using features such as search, you may run the files in Navigator using Digital AV mode.  
- If you were running Voice Record before turning off the product, it will resume in Voice Record mode when the power is turned  
on again.  
- Recording consumes more battery power than usual. Be sure to fully charge the battery before recording.  
- The recorded file can be verified in “VOICE” of the upper most folder.  
- The quality and capacity of the recording depends on the recording quality setup in addition to the reception.  
- Maximum capacity for a single recording is 268MB. A new file will be created and start recording if the capacity is exceeded.  
- If there is less than 128MB space available on the hard disk, the recording will not start. If the available space becomes less than  
128MB during recording, the recording will end.  
- Up to 999 files can be recorded.  
5.Picturemode(ImageViewing)  
2. Save the image file you want to see in iAUDIO to the “PICTURE” folder in iAUDIO.  
3. Disconnect iAUDIO and the PC.  
4. Turn the product ON and move to Picture mode.  
5. You can see the image files that are saved in the ‘PICTURE” folder.  
6. Moving the lever +, - will enlarge and reduce the image size, and moving the lever ,will allow  
you to see the Previous/Next image in sequence.  
7. Pressing the “PLAY” button will show the Thumbnail image and Fast Search is available.  
iAUDIOX5 ENGLISH  
15  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
8. A short-press of the lever will show the Navigator. A short-press on the lever after selecting a desired  
file name will launch a popup window.  
9. You may see the image by selecting “View,” and set the image as the desktop wallpaper by selecting  
“Wallpaper.”  
10 . If you turn the product off or enter a different mode by pressing and holding the lever while viewing  
an image, you can exit Picture mode.  
- Image formats other than JPG (excluding Progressive Type) are not supported.  
- Be sure to save image files only in the “PICTURE” folder.  
- Subfolders in the “PICTURE” folder are not supported.  
- Image files will be recognized up to 2.5MB, and the maximum number of folders that files can be saved in is 999, and the maximum  
number of files is 4999 (total file number under “PICTURE”).  
6.USBHostMode(SendingandReceivingFilesUsingCompatibleDevices)  
USB Host Mode can copy and delete files and folders from iAUDIO or USB compatible devices such as digital  
cameras and readers.  
Managing iAUDIO  
1. Turn the power ON, then go to USB Host mode.  
2. You can view folders and files in iAUDIO like you can in the Navigator.  
3. Moving and going into folders in USB Host mode is the same as in Navigator mode.  
4. When selecting a folder, a pop-up window appears with four menus.  
Copy : Saves the selected folder to the clipboard.  
Paste : Copies the content from the clipboard to the currently open folder.  
Paste In : Copies the content from the clipboard to the currently selected folder.  
Delete : Deletes the selected folder.  
5. When selecting a folder, a pop-up window appears with three menus.  
Copy : Saves the selected file to the clipboard.  
Paste : Copies the content from the clipboard to the currently open folder.  
Delete : Deletes the selected file.  
6. You can move out of USB Host mode by turning off the power or go into another mode by holding down  
the menu button in USB Host mode.  
- The top folders of iAUDIO and USB compatible devices are “HOST” and “DEVICE” respectively.  
- iAUDIO doesn’t support multiple file selections. If you wish to copy multiple files at once, you must divide them by folder.  
- The clipboard is a virtual space where files and folders are saved when copying them.  
- When copying, the total length of the path that indicates files or folders is limited. Therefore try to avoid copying a folder  
from a deep path.  
- In USB Host mode, the highest number of recognizable folders and files is 1499 and 2999 respectively.  
ENGLISH iAUDIOX5  
16  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
Using USB Compatible Devices  
COWON  
iAUDIO  
1. Use a USB Host cable to connect the iAUDIO USB Host port to the USB jack of a compatible device.  
2. Turn the power ON, then go to USB Host mode.  
3. When the “HOST” mode is displayed, hold down the “REC” button until it changes to “DEVICE”  
mode.  
4. Copying and deleting folders and files is the same. However, if you want to copy a file or folder from  
a compatible device to iAUDIO, select the desired folder or file to copy and change the mode by holding  
down the “REC” button then choose “Paste” or “Paste In”.  
5. After completing copying or deleting, unplug the USB Host cables.  
6. You can move out of USB Host mode when turning the power off or go into another mode by holding down  
the menu button in USB mode.  
- It can take some time if you are connecting USB compatible devices for the first time.  
- The mode changes whenever you hold down the “REC” button, and therefore it may take some time.  
- If the device is not recognized, the mode doesn’t change.  
- When copying, the total length of the path that indicates files or folders is limited. Therefore try to avoid copying a folder  
from a deep path.  
- In USB Host mode, the highest number of recognizable folders and files of the device is 1499 and 2999 respectively.  
iAUDIOX5 ENGLISH  
17  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
1.UsingtheButtons(SummaryTableofButtonUserGuideforEachMode)  
Navigator Mode  
Key  
Play  
Operation  
WhenSelectingaFile  
WhenSelectingaFolder  
Changes into play mode after playing  
back the selected file  
Goes to the selected folder  
Plays back the selected file and stays in Goestotheselectedfolder  
Navigator mode  
FF  
REW  
MENU  
+
Moves to the parent folder  
Pop-up menu  
Movestotheparentfolder  
Pop-up menu  
Moves the focus upward  
Moves the focus upward  
Moves the focus downward  
Changes into play mode  
Moves the focus downward  
Changes into play mode  
-
REC/A  
B
Digital AV mode  
Key  
Play  
Operation  
WhileStopped  
Plays back the current file  
Operates the setting  
DuringPlayback  
Stops the playback of the current file  
Operates the setting  
Goes to the next file  
Skips5secor10sec,orskipstracks  
accordingtotheSKIPsetup  
FF  
Goes to the next file  
Fastforward  
Goes to the previous file  
Skips5secor10sec,orskipstracks  
accordingtotheSKIPsetup  
REW  
Goes to the previous file  
Navigator Mode  
Setup Menu  
Fast rewind  
Navigator Mode  
Setup Menu  
Volume up  
MENU  
Volume up  
+
-
Volume down  
Volume down  
Set/Reset section repeat  
Operates the setting  
REC/A  
B
Operates the setting  
Inthekeyoperation, indicatestopressonceand  
indicatestoholddownlongerthan1second.  
ENGLISH iAUDIOX5  
18  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
FM Radio Mode  
Key  
Play  
Operation  
WhileStopped  
InPresetMode  
Changes to the preset mode  
Changes to regular mode  
Increases the frequency  
Auto searches for the next station  
Decreases the frequency  
Auto searches for the previous stations  
Sets up the preset mode  
Setup Menu  
Movestothenextpreset  
Movestothenextpreset  
Movestothepreviouspreset  
Moves to the previous preset  
Sets up the preset mode  
Setup Menu  
FF  
REW  
MENU  
+
Volume up  
Volume up  
Volume down  
Volume down  
-
Start/Stop Recording  
Start/Stop Recording  
REC/A  
B
Voice Record/LineIn Record Mode  
Key  
Play  
Operation  
WhileStopped  
DuringRecording  
Plays back the recorded file  
Pause or records continuously  
Navigator Mode  
Setup Menu  
Volume up  
MENU  
+
Volume down  
-
Start recording  
Stop recording  
REC/A  
B
Inthekeyoperation,  
indicatestopressonceand  
indicatestoholddownlongerthan1second.  
iAUDIOX5 ENGLISH  
19  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
ꢀꢀꢀꢀꢀꢀ  
1.MenuIndex  
Skip Length  
Menu  
General  
Digital AV  
FM Radio  
Voice Record  
LineIn Record  
Picture  
Scan Speed  
Resume  
AutoPlay  
FadeIn  
Controls  
USB Host  
Settings  
USB Mode  
Load Default  
FM Radio bps  
Line-in bps  
Voice bps  
Line Volume  
Mic Volume  
Auto Sync  
Voice Active  
Streo  
Settings  
JetEffect  
Recording  
Equalizer  
BBE  
Mach3Bass  
MP Enhance  
3D Surround  
Pan  
Boundary  
Repeat  
FM Radio  
PlayMode  
Display  
FM Region  
Shuffle  
Information  
Language  
Song Title  
Play Time  
Album Scroll  
Title Scroll  
WallPaper  
Status Bar  
Lyrics  
Scroll Speed  
Contrast(M)  
Contrast(R)  
Brightness(M)  
Backlight Time(M)  
Backlight Time(R)  
Clock  
- The setup menu is subject to change if there are  
any future firmware upgrades.  
Timer  
- The language for the setup menu can be changed in  
5) Display → 1. The language default setting is English.  
- For setup menu operations, please refer to 2. Basic  
Operations → 3. Basic operations for the menu use.  
Alarm  
Sleep  
AutoOff  
ENGLISH iAUDIOX5  
20  
iAUDIOX5 ENGLISH  

Advent ADV10A User Manual
Aiwa CSD TD320 User Manual
Atlas Sound GD87W User Manual
Bryan Boilers 200 User Manual
Calibre UK 15ID User Manual
Clarion APX2120 User Manual
Grace GDI IR2000 User Manual
Hypertec 3108 User Manual
Igloo FRW080UK User Manual
Jensen JRV210 User Manual