Owner’s manual
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
Bruksanvisning
Manual de instruções
DXZ868RMP
CD/MP3/WMA Receiver / CeNET & Touch Panel Control
Récepteur CD/MP3/WMA / CeNET et écran de contrôle tactile
CD/MP3/WMA-Receiver / CeNET & Touch Panel Bedienfeld
Lettore CD/MP3/WMA / Comando pannello a tocco CeNET
CD/MP3/WMA Ontvanger / CeNET & Aanraakbedieningspaneel
Receptor de CD/MP3/WMA / Control en panel táctil y CeNet
CD/MP3/WMA-mottagare / CeNET & Pekskärm
CD/MP3/WMA Receiver / CeNET & Touch Panel Control
Contents
1. PRECAUTIONS .............................................................................................................................. 3
Sloping Console .............................................................................................................................. 4
Handling Compact Discs ................................................................................................................ 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE ......................................................................................................................... 6
Names of the Buttons and their Functions ..................................................................................... 6
Operations when External Equipment is Connected to this Unit ..................................................... 7
Touch Panel Buttons....................................................................................................................... 8
Touch Panel Operations .................................................................................................................. 9
4. DCP .............................................................................................................................................. 10
5. REMOTE CONTROL..................................................................................................................... 11
Inserting the Battery .......................................................................................................................11
Functions of Remote Control Unit Buttons ................................................................................... 12
6. OPERATIONS ............................................................................................................................... 13
Basic Operations .......................................................................................................................... 13
Radio Operations ........................................................................................................................... 16
RDS Operations ............................................................................................................................ 19
CD/MP3/WMA Operations ............................................................................................................ 24
Sound Adjustment ......................................................................................................................... 29
Common Operations ..................................................................................................................... 32
7. OPERATIONS OF ACCESSORIES ............................................................................................. 41
CD Changer Operations ............................................................................................................... 41
TV Operations .............................................................................................................................. 44
Digital Radio/DAB Operations ....................................................................................................... 47
8. IN CASE OF DIFFICULTY ........................................................................................................... 50
9. ERROR DISPLAYS ....................................................................................................................... 52
10. SPECIFICATIONS ......................................................................................................................... 53
1. PRECAUTIONS
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater, moisture may form on the disc or the
optical parts of the player and proper
2. Driving on extremely bumpy roads may
cause severe vibration and cause the sound
to skip.
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about 1 hour.
The condensation will disappear naturally
allowing normal operation.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
WARNING
For your safety, do not watch or operate the touch panel while driving.
DXZ868RMP
3
Sloping Console
This unit uses a SLOPING CONSOLE to make
large screen displays possible.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the safety
mechanism. This is normal.
When you use the SLOPING CONSOLE, be
sure to close it.
3. If you move the SLOPING CONSOLE by
hand, this may start play. To correct this play,
with the power for the unit ON, press the [Q]
button to close the SLOPING CONSOLE.
CAUTION
4. After a disc is ejected, the SLOPING
CONSOLE automatically returns to the tilted
or closed state. If there is any obstruction
when the SLOPING CONSOLE tries to close,
the safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the
obstruction, then press the [Q] button.
5. To avoid scratching the compact disc, keep
the 12 or 8 cm CD level when loading or
removing it.
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING
CONSOLE before leaving this unit unused for
a prolonged period or switching OFF the
ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
Handling Compact Discs
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
break the internal mechanism.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some CD-R and
CD-RW discs may not be playable. Therefore,
do not leave them for a long time in the car.
• New discs may
have some
roughness
around the
edges. If such discs
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
• Do not expose compact discs to excess
humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Ball-point pen
Roughness
are used, the player
may not work or the sound
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
may skip. Use a ball-point pen
or the like to remove any
roughness from the edge of the disc.
• Never stick labels on the surface of the
compact disc or mark the surface with a pencil
or pen.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
• Never play a compact disc with any cellophane
tape or other glue on it or with peeling off
marks. If you try to play such a compact disc,
you may not be able to remove it from the CD
player or it may damage the CD player.
4
DXZ868RMP
2. CONTROLS
Main unit
[
]
[Q] (OPEN/EJECT)
ADJ
Photo Sensor
IR-Receiver
[MODE]
[
]
ROTARY
[
] (SOUND)
[SRC]
[TA]
Display
With the SLOPING CONSOLE opened
[CD SLOT]
DCP Detaching Slider
DXZ868RMP
5
3. NOMENCLATURE
Names of the Buttons and their Functions
IR-Receiver
DCP Detaching Slider
• Receiver for remote control unit. (Operating
• Removes the DCP.
range: 30° in all directions)
Display
[ADJ] button
• Use this button to set or adjust the various
settings in the adjust mode.
• Displays the various information that indicates
the operating state of this unit such as tuning/
play state and indicators.
• You can operate the display by touching or
[Q] (OPEN/EJECT) button
touching
the surface. (cf. page 9)
• Open/closes the control panel.
To eject a disc, open the control panel first, and
then press this button once again.
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[MODE] button
• Use this button to play in scan, repeat, or
random mode.
• Press and hold this button for 2 seconds or
longer to switch between standard and simple
operation displays.
[
] (SOUND) button
• Use this button for setting or adjusting various
settings such as ADF.
[TA] button
• Use this button to turn on/off TA (Traffic
Announcement).
[SRC] button
• Switches among sound sources as shown
below.
Radio ➜ (DAB) ➜ CD/MP3 ➜ (CD changer) ➜
(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...
Note:
External equipment not connected with CeNET is
not displayed.
[ROTARY] knob
• Press the knob to turn the power ON.
• Press the knob to turn the power OFF.
• Turn the knob to adjust the volume.
[CD SLOT]
• CD insertion slot.
6
DXZ868RMP
Operations when External Equipment is Connected to this Unit
●When the CD/DVD changer is
connected
∗ For details, see the section “CD changer
operations” (cf. page 41). For the DVD
changer, refer to the Owner’s Manual
provided with the DVD changer.
●When the TV/DAB is connected
∗ For details, see the section “TV
operations” (cf. page 44) or “Digital
Radio/DAB operations” (cf. page 47).
DXZ868RMP
7
Touch Panel Buttons
●Standard operation display
●Simple operation display
(To switch to the simple operation display, press
and hold the [MODE] button for 2 seconds or
longer.)
Left slide
button
Right slide
button
Left button
Right button
98.10
P3
FM1
P.CH
SEEK
CT
2:45
DISP
PRESET
BAND
PS/AS
FM1
P.CH
SEEK
CT
2:45
DISP
P3
98.10
Sub buttons
PRESET
BAND
PS/AS
Sub buttons
Left slide button
• Touch this button for seek up/down or track up/
down operations.
• Touch and hold this button for fast-forward/fast-
rewind operations.
Left button
• Touch this button for seek down or track down
operations.
• Touch and hold this button for fast-rewind
operation.
Right slide button
• Touch this button for preset channel up/down,
folder up/down, and disc up/down operations.
Right button
• Touch this button for seek up or track up
operations.
• Touch and hold this button for fast-forward
operation.
Sub buttons
• Shows functions available in a certain context.
Sub buttons
• Shows functions available in a certain context.
8
DXZ868RMP
Touch Panel Operations
A touch panel display is used as the display on
this unit. You can operate this display just by
touching it with your fingertip. There are four
main display operations as follows:
Touch
Touch the display with your fingertip, and move
your finger to the up ( ) or down ( ) with your
fingertip still touching the display, and keep your
fingertip on the display. The current operation
continues for the time your fingertip is held on
the display. This operation is used, for example,
for fast-forwarding/fast-rewinding tracks.
Touch
Touch the display with your fingertip and take it
away within 1 second. This is the most basic
operation when operating the display.
Touch and hold
Touch the display with your fingertip and hold it
on the display for 1 or 2 seconds or longer. Do
not move your finger while you are touching the
display.
Touch
P
FM1
Touch the display with your fingertip, and move
your finger to the up ( ) or down ( ) with your
fingertip still touching the display, and take your
fingertip away within 1 second. This operation is
used, for example, selecting tracks or discs.
P.CH
CT
2:45
DISP
98.10
MANU
DXZ868RMP
9
4. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
Attaching the DCP
1. Place the DCP to the SLOPING CONSOLE,
adjusting the metal connecters on DCP and
the SLOPING CONSOLE.
We recommend taking the DCP with you when
leaving the car.
2. Press the DCP until it clicks into the
SLOPING CONSOLE.
Removing the DCP
1. Turn off the power.
2. Press the [Q] button to open the DCP.
3. Move the DCP detaching slider to the
“RELEASE” side.
4. Push and slide the DCP upward to remove.
CAUTION
• If the slider is on the [RELEASE] side and
the DCP is not locked into place, it may fall
out from vibration of the car. This can break
the DCP, so after removing it, either firmly
reattach it on the unit or put it in its DCP
case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
∗ The SLOPING CONSOLE without DCP
closes automatically in a few seconds.
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
CAUTION
• Do not try to remove or attach while
driving.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it
or subject it to strong shocks.
• This DCP is equipped with a highly
advanced device. In order to make the best
performance, it is required to get an
electrical calibration by authorised service
shop. Please consult with your Clarion
dealer or distributor.
10
DXZ868RMP
5. REMOTE CONTROL
Receiver for remote control unit
Operating range : 30° in all directions
Signal transmitter
Remote control unit
[
]
]
[
[
]
SRC
BND
]
[
[
], [
[
], [
]
a
d
]
]
[
[
]
MUTE
DISP
[
TA
]
PTY
[
]
[
]
AF
PS/AS
Inserting the Battery
1. Turn over the remote control unit and slide the
cover in the direction indicated by the arrow in the
illustration.
2. Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing upwards.
1
3. Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4. Replace the cover and slide in until it clicks into
place.
Insertion guide
3
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or damage
to surrounding materials. Always follow these safety
precautions:
2
R
• Use only the designated battery .
• When replacing the battery, insert properly, with +/-
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
DXZ868RMP
11
Functions of the Remote Control Unit Buttons
Mode
CD changer
DVD changer
Radio (RDS)/DAB
CD/MP3/WMA
TV
Button
Switches among radio, DAB tuner, CD/MP3/WMA, CD changer, DVD changer, TV and
AUX.
[SRC]
Returns to the first
track.
Moves the next disc
in increasing order.
Switches reception
band.
Switches reception
band.
[BND]
Increases and decreases volume (in all modes).
[
[
] , [
] , [
]
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second or longer:
Fast-forward/fast-rewind.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
[MUTE]
Turns mute on and off.
TA on and off.
[TA]
No function.
Press to cancel a traffic announcement broadcast during a TA interrupt.
Switches between the title display and the spectrum analyzer display.
[DISP]
Scan play.
Preset scan.
[PS/AS]
Preset scan.
Scan play.
When pressed and
held for 1 second or
longer:
When pressed and
held for 2 seconds or
longer:
When pressed and
held for 2 seconds or
longer:
When pressed and
held for 1 second or
longer:
Folder scan play
(MP3/WMA disc).
Auto store.
Auto store.
Disc scan play.
Repeat play.
No function.
[AF]
AF function on and
off.
When pressed and
held for 1 second or
longer: REG function
on and off
Repeat play.
When pressed and
held for 1 second or
longer:
When pressed and
held for 1 second or
longer:
Folder repeat play
(MP3/WMA disc).
Disc repeat play.
No function.
Press to cancel an emergency broadcast during an ALARM interrupt.
Random play.
Switches between TV
and VTR.
[PTY]
PTY mode on and
off.
Random play.
When pressed and
held for 1 second or
longer:
When pressed and
held for 1 second or
longer:
Folder random play
(MP3/WMA disc).
Disc random play.
No function.
Press to cancel a PTY broadcast during a PTY interrupt.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
12
DXZ868RMP
6. OPERATIONS
Basic Operations
CAUTION
Selecting a mode
1. Press the [SRC] button to change the
Be sure to lower the volume before
operation mode.
switching the unit off or the ignition key. The
unit remembers its last volume setting. If you
switch the power OFF with the volume up,
when you switch the power back ON, the
sudden loud volume may hurt your hearing
and damage the unit.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio ➜ (DAB) ➜ CD/MP3 ➜
(CD changer) ➜ (DVD changer) ➜ (TV)
➜ AUX ➜ Radio...
∗ External equipment not connected with
CeNET is not displayed.
Turning ON/OFF the power
Turning on
Adjusting the volume
Note:
1. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to
33 (maximum).
• Be careful when using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [ROTARY] knob.
The mode that was previously active is
displayed.
Switching the operation
display mode
Turning off
1. Press the [ROTARY] knob.
There are 2 basic operation displays: standard
operation display and simple operation display.
1. Press and hold the [MODE] button for 2
seconds or longer to switch the operation
display.
CODEMATIC function
When “CODEMATIC” is set to “ON”, and the
power is turned ON with the DCP attached, the
Touch Code display appears. Touch the display
in the order that was set in the adjust mode.
FM1
P.CH
SEEK
CT
2:45
DISP
P3
98.10
PRESET
BAND
PS/AS
ADJ SETTING
CODEMATIC
OFF
In the simple operation display, the operations of
touching in the radio or CD mode display
screen are not required.
RTN
For details on the CODEMATIC function, see
“Using the security function” (cf. page 40).
Descriptions given in this manual are mainly for
the standard operation display. For descriptions
for operations in the simple operation display,
refer to the descriptions for the screen displays
in the radio mode or the CD mode.
DXZ868RMP
13
Basic Operations
3. Touch
on the left of the display to
Switching the background
1. Touch [DISP].
select [DAY] or [NIGHT].
COLOR SELECT
NIGHT
DARK BLUE
98.10
P3
FM1
P.CH
SEEK
RTN
CT
2:45
DISP
PRESET
BAND
PS/AS
4. Touch
select the color to set.
● COLOR
• DARK BLUE
on the right of the display to
∗ DISPLAY EDIT screen displays.
2. Touch
on the left of the display to
choose the background.
DISPLAY EDIT
• IVORY
<<
TITLE
P
02
• WINE RED
BGV
• LIGHT BLUE
• GREEN
RTN
SP/ANA
∗ The background includes 12 wallpaper
images and 2 motion pictures.
∗ Choose [SCAN] to automatically display all
the wallpaper.
Adjusting the spectrum
analyzer
● Background
M01: WRC
M02: Landscape
1. Touch [DISP].
P01: Car and Checker Flag
P02: 307WRC from Two View Points
P03: Rally Driver
Don ,
t
Stop Be
01
TRACK
CT
01:01
2:45
DISP
TOP
P04: Driving Scene
P05: Cube
P06: Bubble
∗ Display edit mode appears.
2. Touch [SP/ANA].
DISPLAY EDIT
P07: Speaker
P08: Digital Image1 (Disc media)
<<
TITLE
P
05
BGV
P09: Digital Image2 (Broadcast media such
D
-
BLUE
as satellite)
INPUT
RTN
SP/ANA
COLOR
P10: Mixer
P11: Record Player
P12: Meter
∗ The display shows the spectrum analyzer
mode.
3. Touch
on the right of the display to
3. Touch [RTN].
select the spectrum analyzer to set.
DISPLAY EDIT
■ To change wallpaper color
You can change the colors of the wallpaper
(from P05 to P12).
P
05
1
BGV
SPE/ANA
D-BLUE
COLOR
MID
TITLE
SENS
RTN
• It can be set to both “DAY” mode and “NIGHT”
mode.
• You can choose from four types.
• When [SCAN] is selected, each of them is
1. Touch [DISP].
2. Touch [COLOR].
DISPLAY EDIT
displayed for about 10 seconds.
4. Touch [SENS] to select the sensitivity.
DISPLAY EDIT
<<
TITLE
P
05
BGV
P
05
1
D
-
BLUE
AUTO
BGV
SPE/ANA
D-BLUE
COLOR
LOW
SCROLL
RTN
SP/ANA
COLOR
TITLE
SENS
RTN
∗ The [COLOR] is displayed only when you
choose wallpaper from P05 to P12.
• You can choose from [HIGH], [MID], or [LOW].
5. Touch [RTN].
14
DXZ868RMP
Basic Operations
Switching the title display
CT (Clock Time) function
You can display stored information such as disc
titles or track titles when playing back music in
CD or CD changer mode.
The CT allows you to receive CT data sent from
an RDS station and display the time. To display
the CT screen, touch the centre of the display.
• If CT data is not being received, “--:-- CT”
appears in the display.
1. Touch [DISP] while a title is shown.
Note:
01
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT data may not display accurately.
TRACK
CT
2:45
DISP
02:53
TOP
∗ Display edit mode appears.
2. Touch [TITLE].
DISPLAY EDIT
P
05
1
BGV
SPE/ANA
D-BLUE
COLOR
LOW
TITLE
SENS
RTN
∗ Title edit mode appears.
3. Touch
on the right of the display to
choose the kind of title to show.
DISPLAY EDIT
<<
TITLE
P
05
TRACK
BGV
D
-
BLUE
AUTO
RTN
SP/ANA
COLOR
SCROLL
∗ The title you have chosen is displayed. If it
is too long to fit into the display, it
automatically scrolls.
4. Touch [SCROLL].
• Select [AUTO] to scroll the title repeatedly.
• Select [ONCE] to scroll the title only once.
Notes:
• You cannot set the scroll options in User title.
5. Touch [RTN].
●CD mode (MP3/WMA)
Folder title (when using a folder) ➜ Play
list (when using a play list) ➜ Track title
➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜
Folder title (when using a folder)...
Notes:
• MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
DXZ868RMP
15
Radio Operations
BAND
Screen displays in the radio
mode
● Standard operation display
The standard operation display appears by
pressing the [SRC] button and selecting the
radio mode.
Touching this switches the reception band.
Touching and holding this for 1 second or longer
switches between the manual tuning mode and
the seek tuning mode.
PS/AS
Touching this starts a preset scan.
Touching and holding this for 2 seconds or
longer starts an auto store.
Touching this during the preset scan/auto scan
ends the operation.
Preset No.
display
Title display
Reception
Frequency
display
band display
DISP
The display contents can be changed.
98.10
P3
FM1
P.CH
SEEK
CT
2:45
DISP
a/d (only in the simple operation display)
Touching these enables seek tuning or step
tuning (in the manual tuning mode).
Touching and holding these enables quick
tuning (in the manual tuning mode).
PRESET
BAND
PS/AS
DISP
PRESET
SEEK/MANU
display
PS/AS
BAND
● Simple operation display
Listening to the radio
1. Press the [SRC] button to select the radio
mode.
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
Each press of the [SRC] button switches the
mode as follows:
a/d
Radio ➜ (DAB) ➜ CD/MP3 ➜
(CD Changer) ➜ (DVD Changer) ➜ (TV)
➜ AUX ➜ Radio...
FM1
P.CH
SEEK
98.10
CT
2:45
DISP
P3
PRESET
BAND
PS/AS
∗ The mode of equipment that is not
connected is not displayed.
Frequency display
2. Touch [BAND] to switch the reception band.
Each touch of [BAND] switches the
reception band as follows:
The frequency currently being received is
displayed.
Touching
or
on the left slide
button in the standard operation display allows
you to perform seek tuning or manual tuning.
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜
FM1...
Preset No. display
Touching
on the right slide button in the
standard operation display selects a preset
memory.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Title display
Displays the name of the broadcast channel
currently being received.
Seek tuning
Reception band display
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
AM: AM band name
FM1: FM band name
DX SEEK can automatically tune in to
receivable broadcast stations, while LOCAL
SEEK can tune in to only broadcast stations
with good reception sensitivity.
PRESET
Touching this displays a preset memory No. list.
16
DXZ868RMP
Radio Operations
1. Touch [BAND] to select the desired band
1. Touch [PRESET].
(FM or AM (MW, LW)).
The preset memory No. list is displayed.
2. Tune into a station.
2. Touch the preset memory No.
∗ If "MANU" is displayed, touch and hold
[BAND] for 1 second or longer.
Automatic tuning is possible when "SEEK"
is displayed.
∗ In the standard operation display, preset
No. can also be tuned by touching
.
■ To cancel tuning
∗ If “TA” is lit in the display, TP stations are
automatically sought.
1. Touch [RTN].
DX SEEK
When
is touched on the frequency
Preset memory
display, automatic tuning starts.
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory.
When
is touched, the station is sought in
the direction of higher frequencies; when
is
touched, the station is sought in the direction of
lower frequencies.
1. Touch [BAND] to switch the reception band.
2. Operate the frequency display to tune to a
frequency to store.
∗ When seek tuning starts, “DX SEEK” appears
in the display.
3. Touch [PRESET].
LOCAL SEEK
The preset memory No. list is displayed.
When
is touched on the frequency
display, local seek tuning is carried out.
Broadcast stations with good reception
sensitivity are selected.
4. Touch and hold the preset No. to store the
station to for 2 seconds or longer.
You will hear a long beep, and the station is
stored in memory.
∗ When local seek starts, “LO SEEK” appears
in the display.
Auto store
Manual tuning
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially.
There are 2 ways available: quick tuning and
step tuning.
In the step tuning mode, the frequency changes
1 step at a time. In the quick tuning mode, you
can quickly tune the desired frequency.
1. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” is displayed.
1. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
∗ Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
2. Operate the frequency display to tune to a
frequency on which there is a broadcast.
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than 6 stations with good
reception in LOCAL SEEK, low frequencies are
automatically returned to, and auto store is
● Step tuning
Touch
on the frequency display.
● Quick tuning
Touch
on the frequency display. Tuning
performed again by DX SEEK. If there are fewer
than 6 stations even after auto store is performed
twice, stations stored so far remain in memory.
stops when you take your finger away from the
panel.
• If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Recalling a preset station
Recalling a preset station is a function for tuning
pre-stored stations.
DXZ868RMP
17
Radio Operations
Preset scan
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch [PS/AS].
“P-SCAN” is displayed.
∗ The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
■ To cancel preset scan
1. Touch [PS/AS].
“P-SCAN” display disappears and the
stations that were being received when [PS/
AS] was touched are received next.
18
DXZ868RMP
RDS Operations
RDS (Radio Data System)
AF function
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
This system can display the name of the
broadcast station being received (PS), and can
automatically switch to the broadcast station
with the best reception as you move over long
distances (AF switching).
• The factory default setting is “ON”.
• When the AF function is ON, “AF” blinks in the
display.
■ To switch the AF function ON/OFF
If a traffic announcement or programme type is
broadcasted from an RDS station, this
broadcast is received no matter what mode you
are in.
1. Press the [MODE] button.
2. Touch [AF].
“AF” goes off in the display.
To switch the AF function ON, repeat steps 1
Also, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
and 2.
∗ If the reception of the current broadcast
station deteriorates, “SEARCH” appears in
the display, and the radio searches for the
same programme on another frequency.
■ AF function between RDS and DAB
When using the RDS function, always set the
radio to the FM mode.
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, this
unit automatically switches to receive the
broadcast with the better reception.
• AF : Alternative Frequency
• PS : Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP : Traffic Programme
• This function only operates when the DAH923
or DAH913 DAB unit (Optional) is connected.
• This factory default setting is “ON”.
• PI :
• TA :
Programme Identification
Traffic Announcement
1. Press the [ADJ] button to set to the adjust
∗ RDS interrupt does not function during AM
radio reception.
∗ When this unit receives the RDS signal,
and can read PS data, PS appears in the
display.
mode.
2. Touch [TUNER].
3. Touch
on the left of the display to
select “LINK ACT”.
ADJ TUNER
LINK ACT
ON
RTN
4. Touch
select "ON" or “OFF”.
ON:
on the right of the display to
AF switching between DAB and RDS is
enabled.
OFF:
AF switching between DAB and RDS is
disabled.
5. Press the [ADJ] button to return to the
original mode.
DXZ868RMP
19
RDS Operations
REG (Regional programme)
function
TA (Traffic Announcement)
When a traffic announcement broadcast starts
in the TA standby mode, the traffic
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, the optimum station for that
region is received if the regional station area
switches as you drive.
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP) automatic
tuning is also possible.
• This function can only be used when “TP” is lit
in the display. When “TP” is lit, this means that
the RDS broadcast station being received has
traffic announcement programmes.
• The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
■ To set the TA standby mode
• The REG function ON/OFF setting is valid when
the AF function is ON.
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display,
and this unit is set to the TA standby mode until
a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
■ To switch the REG function ON/OFF
1. Press the [MODE] button.
2. Touch [REG].
“REG” lights in the display.
To switch the REG function OFF, repeat
steps 1 and 2.
announcement broadcast reception is cancelled
and this unit enters the TA standby mode.
Manually tuning a regional
station in the same network
■ To cancel the TA standby mode
With “TP” and “TA” lit in the display, press the
[TA] button. “TA” in the display goes off and the
TA standby mode is cancelled.
• This function is valid when the AF function is
ON.
• If “TP” is not lit, pressing the [TA] button
searches for a TP station.
• The operation differs according to the ON/
OFF setting of the REG function. When the
REG function is ON, broadcasts having a
perfectly matching PI code can be received.
When the REG function is OFF, broadcasts of
the same type of PI code can be received.
■ To search for a TP station
If you press the [TA] button when “TP” is not lit,
“TA” in the display lights and this unit
automatically receives a TP station.
Notes:
• This function can be used when a regional
broadcast of the same network is received.
• The PI code is a coding system that is unique to
each broadcast station.
Note:
• When a TP station cannot be received, “TP
SEEK” is displayed, and the search for the TP
station is continued. When the [TA] button is
pressed again, “TA” and “TP SEEK” in the display
go off, and the search for the TP station ends.
1. Touch [PRESET].
The preset memory No. list is displayed.
2. Touch the preset memory No. of the
broadcast to be received.
20
DXZ868RMP
RDS Operations
Auto store function for TP
stations
Selecting PTY
1. Press the [MODE] button.
You can automatically store up to 6 TP stations
to preset memory. If the number of TPs that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
2. Touch [PTY SELECT].
3. Touch
select PTY.
on the right of the display to
∗ Below are the factory default settings
stored:
1. Make sure that “TA” is displayed.
If “TA” is not displayed, press the [TA] button
to display “TA”.
PTY item
number ENGLISH Contents
Preset
P1
P2
P3
P4
P5
P6
News
Info
Pop M
Sport
Classics
Easy M
News
Information
Pop Music
Sport
Serious Classical Music
Easy Listening Music
2. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” is displayed and the preset No.
in the auto-store operation appears on the
preset No. display.
• TP stations with good reception sensitivity are
stored to preset memory.
• Even if you select FM1 or FM2, a TP station is
stored to memory for FM3.
4. The PTY select mode is cancelled
automatically 7 seconds after, or touch
[RTN].
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if this unit is in a function mode other than radio.
PTY seek
1. Press the [MODE] button.
• The factory default setting is “OFF”.
• Some countries do not yet have PTY
broadcast.
• In the TA standby mode, a TP station has
priority over a PTY broadcast station.
2. Touch [PTY SELECT].
3. Either touch
on the right of the
display, or touch [PTY-]/[PTY+] to select
PTY.
4. Touch
When
on the left of the display.
is touched, this unit seeks a PTY
■ To set the PTY standby mode
broadcast moving up the frequencies, while
when is touched it seeks moving down
the frequencies.
∗ If no station with the selected PTY
broadcast can be received, this unit
returns to the previous mode.
1. Press the [MODE] button.
2. Touch [PTY].
“PTY” lights in the display and the PTY
standby mode is turned on.
When the selected PTY broadcast starts,
the PTY item name appears in the display.
■ To cancel the PTY standby mode
1. Press the [MODE] button.
2. Touch [PTY].
“PTY” goes off in the display and the PTY
standby mode is cancelled.
■ To cancel a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast. The PTY interrupt broadcast is
cancelled and this unit returns to the PTY
standby mode.
DXZ868RMP
21
RDS Operations
PTY item
SVENSKA
Nyheter
Aktuellt
Info
ENGLISH
News
Affairs
Info
DEUTSCH
Nachrich
Aktuell
Service
Sport
FRANÇAIS
Infos
Magazine
Services
Sport
Contents
News
Today’s events
Information
Sports
Sport
Sport
Educate
Drama
Culture
Science
Varied
Bildung
Hör + Lit
Kultur
Wissen
Unterh
Pop
Utbildn
Teater
Kultur
Vetenskp
Underh
Pop
Educatif
Fiction
Culture
Sciences
Divers
Education
Drama
Culture
Science
Variety
Pop music
Rock music
Easy music
Light music
Classics
Other music
Weather
Finance
For children
Social
Religion
Phone in
Travel
Leisure
Pop M
M Pop
Rock M
Easy M
Light M
Classics
Other M
Weather
Finance
Children
Social
Religion
Phone In
Travel
Leisure
Jazz
Rock
Rock
M Rock
Chansons
M Cl Lég
Classiq
Autre M
Météo
Economie
Enfants
Société
Religion
Forum
U-Musik
L-Musik
E-Musik
- - Musik
Wetter
Wirtsch
Kinder
Soziales
Religion
Anruf
Lättlyss
L klass
Klassisk
Övrig m
Väder
Ekonomi
För barn
Socialt
Andligt
Telefon
Resor
Reise
Freizeit
Jazz
Voyages
Loisirs
Jazz
Fritid
Jazz
Jazz
Country
Nation M
Oldies
Country
Landes M
Oldies
Country
Nation m
Oldies
Country
Ch pays
Rétro
Country
Nation music
Oldies
Folk M
Document
Folklore
Feature
Folkm
Dokument
Folklore
Document
Folk music
Documentaries
PTY preset memory
1. Press the [MODE] button.
Emergency broadcast
If an emergency broadcast is received, all
function mode operations are stopped,
“ALARM” appears in the display, and the
emergency broadcast can be heard.
2. Touch [PTY SELECT].
3. Touch [PTY-]/[PTY+] to select desired PTY.
The 29 PTY types in the table below can be
selected.
■ To cancel an emergency broadcast
If you press the [TA] button, emergency
broadcast reception is cancelled.
4. Touch [PRESET].
The PTY memory title list is displayed.
5. Touch and hold the preset No. to be stored
for 2 seconds or longer.
You will hear a long beep, and the selected
PTY is stored to that preset channel
memory.
22
DXZ868RMP
RDS Operations
Switching the PTY display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY
displayed in the display.
• The factory default setting is “ENGLISH”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [TUNER].
3. Touch
on the left of the display to
select “LANGUAGE”.
ADJ TUNER
LANGUAGE
ENGLISH
RTN
4. Touch
on the right of the display to
select the desired language.
∗ Select one of ENGLISH, DEUTSCH
(German), SVENSKA (Swedish) or
FRANÇAIS (French).
5. Press the [ADJ] button to return to the
original mode.
Volume setting of TA,
emergency broadcast
(ALARM) and PTY
The volume for TA, ALARM and PTY interrupt
broadcasts can be set during TA, ALARM or
PTY interrupt broadcast.
• The factory default setting is “15”.
During a TA, ALARM or PTY interrupt
broadcast, turn the [ROTARY] knob clockwise or
counterclockwise to set the volume to the
desired level (0 to 33).
• When the TA, ALARM or PTY interrupt
broadcast ends, the volume returns to the
level that was active before the interrupt
broadcast.
DXZ868RMP
23
CD/MP3/WMA Operations
a/d (only in the simple operation display)
Touching these buttons selects the track to play.
Touching and holding these buttons fast-
forwards or fast-rewinds tracks.
Screen displays in the CD/
MP3 mode
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select the CD/MP3
mode.
/
(Appears only in MP3/WMA discs
and the simple operation display)
Touching these buttons selects the folder to play.
Track No.
display
Title display
Folder No.
display
MP3/WMA
MP3 (WMA)
What is MP3?
MP3
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
Don ,
t
Stop Be
01
01
TRACK
FOLDER
CT
2:45
DISP
01:01
TOP
DISP
This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
Playing time
display
TOP
● Simple operation display
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
a/d
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
Don ,
t
Stop Be
TRACK
CT
01:26
2:45
DISP
01
Notes:
TOP
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no audio is
output. (The DRM indicator blinks.)
• Windows Media™, and the Windows® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Playing time display
Î00: 01: The playing time is displayed.
Track No. display
If
or
is touched, you can select the
track to play, or fast-forward or fast-rewind
tracks.
● To disable DRM (Digital Rights
Management):
Title display
The selected title is displayed.
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
Folder No. display (in the case of MP3/WMA)
Touching
selects folders.
TOP
Touching this starts play from the track at the
top of the disc or folder being played.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
Touching this pauses or resumes play.
DISP
Personally constructed WMA files are used
at your own responsibility.
The display contents can be changed.
24
DXZ868RMP
CD/MP3/WMA Operations
Precautions when creating
MP3/WMA disc
● Usable sampling rates and bit rates:
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
Multisession function
When a disc contains both CD-DA and MP3/
WMA type tracks mixedly, you can select which
type of the recorded tracks to play.
● Default value is “CD”.
1. Press the [MODE] button.
2. Touch [Å]/[Î] to go to the next page.
3. Touch [MULTI SESS].
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file
extension, the file cannot be played.
Each touch of [MULTI SESS] toggles the
MULTI SESS display between “CD” (play
CD-DA) or “MP3/WMA” (play MP3/WMA).
Setting
Set to CD
Set to MP3/WMA
Disc
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files
without MP3/WMA data.
Mixed with CD and
MP3/WMA type tracks
Play CD
Play CD
Play MP3/WMA
CD-DA
Play CD
MP3/WMA disc
Play MP3/WMA Play MP3/WMA
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660
level 1, 2 or JOLIET or Romeo” as the
writing software format. Normal play may not
be possible if the disc is recorded on another
format.
∗ The multi-session selection setting is
reflected the next time you load a CD.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WMA
type, the CD cannot be played normally in some
cases.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 128 single byte
alphabetical letters and numerals (including
an extension).
Loading a CD
1. Press the [Q] button.
3. Do not affix a name to a file inside a folder
having the same name.
The control panel opens.
2. Insert the disc into the CD SLOT.
When the disc is loaded, the control panel
automatically closes after several seconds,
and play starts.
● Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
Notes:
● Number of files or folders
• Never insert foreign objects into the CD SLOT.
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
• If the CD does not insert easily, there may be
another CD in the mechanism or the unit may
require service.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
3. Some noise may occur depending on the
type of encoder software used while
recording.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the CD
SLOT.
DXZ868RMP
25
CD/MP3/WMA Operations
Backup eject function
Selecting a track
You can eject a disc by pressing the [Q] button
even if the engine key or ACC is at the OFF
position.
When a CD-R/CD-RW recorded with an MP3
file or a WMA file is loaded, you can select only
tracks recorded to the same folder by touching
on the track display.
1. To listen to the next track, touch
track display.
on the
CAUTION
When the disc is ejected, press the [Q]
button to close the control panel. If the
control panel is left open, you will hear a
double beep, and the control panel
automatically closes.
2. To listen to the previous track, touch
twice on the track display.
Touching
touch
plays the next track. If you
more times, the track advances
ahead to the track for the number of times
you touched
Touching
and that track is played.
plays the previous track. If you
1. Press the [Q] button.
The control panel opens.
touch
more times, the track moves back
2. Press the [Q] button.
to the track for the number of times you
touched
∗ If you touch
while the start of the track is being played,
the track 2 tracks back is sometimes
played.
The disc is ejected.
and that track is played.
twice on the track display
Note:
• Always close the SLOPING CONSOLE after
opening it or ejecting the CD.
CAUTION
■ To select a folder
To select a different folder, touch
folder display on the right.
on the
• Be careful not to catch your hand or
fingers while closing the SLOPING
CONSOLE.
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
Play list mode
This function allows you to play tracks, up to
latest 5 time stamps, by reading the play list
information written on the disc.
1. Press the [MODE] button.
2. Touch [Å]/[Î] to go to the next page.
3. Touch [PLAY LIST].
MODE
2
2
MULTI
SESS
PLAY
LIST
Listening to a disc already
loaded in the unit
MP3 WMA
RTN
1. Press the [SRC] button to select the CD/
MP3 mode.
The operation of selecting the play list or
tracks in the play list is the same as that of
selecting a folder or tracks in a folder.
∗ Play list play is possible only when there is
a file whose extension is “.M3U” on the
CD-R/RW.
∗ Up to 5 play lists can be recognized, and
up to 255 files can be recognized per play
list.
∗ Play automatically starts when the mode
changes to the CD/MP3 mode.
Pausing play
1. Touch [
].
■ To resume play
1. Touch [
] again.
26
DXZ868RMP
CD/MP3/WMA Operations
■ Stopping play of play list
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press the [MODE] button.
2. Touch [Å]/[Î] to go to the next page.
3. Touch [PLAY LIST].
1. Press the [MODE] button.
Notes:
2. Touch [TRACK SCAN].
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title changes from folder name to play list
name.
∗ Scan play starts from the next track after
the track currently being played.
■ To cancel scan play
1. Press the [MODE] button.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
Folder scan play
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
recorders on a disc.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
1. Press the [MODE] button.
2. Touch [FOLDER SCAN].
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
∗ Folder scan play starts from the folder
following the folder that is playing.
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
■ To cancel folder scan play
1. Press the [MODE] button.
Repeat play
This function allows you to play the current track
repeatedly.
• When adding a play list, it is recommended to
write it in the “Root” folder.
1. Press the [MODE] button.
2. Touch [TRACK RPT].
Fast-forward/fast-rewind
■ To cancel repeat play
1. To fast-forward, touch
display.
on the track
1. Press the [MODE] button.
2. To fast-rewind, touch
display.
on the track
Folder repeat play
This function allows you to play the current
folder repeatedly.
Top function
The top function resets the CD player to the first
track of the disc.
1. Press the [MODE] button.
2. Touch [FOLDER RPT].
1. Touch [TOP].
■ To cancel folder repeat play
Play starts from the first track (track No.1).
1. Press the [MODE] button.
DXZ868RMP
27
CD/MP3/WMA Operations
Random play
This function allows you to play all tracks on the
disc at random.
When the disc contains 2 or more folders, all of
the tracks in the folder are played at random,
followed by all of the tracks in the next folder.
This is repeated for all folders.
1. Press the [MODE] button.
2. Touch [TRACK RDM].
■ To cancel random play
1. Press the [MODE] button.
Folder random play
This function allows you to play all folders on the
disc at random.
1. Press the [MODE] button.
2. Touch [FOLDER RDM].
■ To cancel folder random play
1. Press the [MODE] button.
28
DXZ868RMP
Sound Adjustment
3. Touch
on the right of the display to
Adjustment items
select the ADF mode.
You can adjust a sound effect or tone quality to
your preference.
ADF MODE
1
ADF 1
Anti Distortion Filter (ADF) .................... Page 29
MAGNA BASS EXTEND ....................... Page 29
Sub-woofer speaker volume
RTN
(SW VOLUME)................................. Page 30
Bass setting (BASS) ............................. Page 30
Treble setting (TREBLE) ....................... Page 30
Balance (BALANCE) ............................. Page 30
Fader (FADER) ..................................... Page 30
Filter (FILTER)....................................... Page 31
∗ Select one of “USER”, “1”, “2”, “3”, or
“OFF”.
4. To change the details of the ADF setting,
press the [ADJ] button.
5. Touch
select the desired item.
Each touch of switches the
on the left of the display to
adjustment item display as follows:
Setting the ADF
●Adjustment item (when USER is
selected in step 3)
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted “Liveliness Enhancement Filter”
and “Sound Tone Compensation” functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
BASS ➜ TREBLE ➜ COMP ➜ BASS...
●Adjustment item (when 1 to 3 is
selected in step 3)
LEVEL ➜ COMP ➜ LEVEL...
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
6. Touch
on the right of the display to
adjust the item.
∗ “BASS” and “TREBLE” can be adjusted
within the range 1 to 13.
∗ “LEVEL” can be adjusted within the range -
3 to +3.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
∗ Select either “ON” or “OFF” for “COMP”.
USER : This setting can be adjusted by the
user to his or her individual preference.
7. Press the [SOUND] button to return to the
original mode.
OFF :
No sound effect
• The factory default setting is “OFF”.
Notes:
Setting MAGNA BASS
EXTEND
• As the volume changes when ADF is switched,
switch ADF with the volume and “SW VOLUME”
(sub-woofer) turned down as far as possible.
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
1. Press the [SOUND] button.
2. Touch [ADF].
SOUND
BASS
1
1
• The factory default setting is "OFF".
M-BASS
EX
ADF
OFF
TREBLE
BALANCE
FADER
0
1. Press the [SOUND] button.
OFF
0
RTN
2. Touch [M-BASS EX] to select "ON" or
"OFF".
∗ Each time you touch [M-BASS EX], the
adjustment item changes as following
order:
OFF ➜ ON ➜ OFF...
3. Press the [SOUND] button to return to the
original mode.
DXZ868RMP
29
Sound Adjustment
Note:
Adjusting the treble (Gain,
Frequency)
When "1", "2", "3", or "USER" is selected for ADF
(Anti Distortion Filter), setting of MAGNA BASS EX
cannot be performed.
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
Adjusting the sub-woofer
2. Touch [TREBLE].
• "SW VOLUME" (sub-woofer) can be adjusted
only when the "SUB-WOOFER" is set to "ON"
(cf. page 37).
3. Touch
select the item.
Each touch of
on the left of the display to
• The factory default setting for SW VOLUME is
“0”.
switches the
adjustment items as follows:
1. Press the [SOUND] button.
GAIN ➜ FREQUENCY ➜ GAIN...
2. Touch [SW VOLUME].
4. Touch
on the right of the display to
adjust the setting.
SW VOLUME
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +6)
∗ The factory default setting for
"FREQUENCY" is "12k". (Adjustment
8kHz/12kHz)
0
RTN
3. Touch
on the right of the display and
adjust the item as desired.
∗ This item can be adjusted within the range
-5 to +5.
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
4. Press the [SOUND] button to return to the
original mode.
Adjusting balance/fader
BALANCE:
Adjusts the volume balance between the left
and right speakers.
Adjusting the bass (Gain,
Frequency, Q-curve)
FADER:
This adjustment can only be performed when
Adjusts the volume balance between the front
and rear speakers.
the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button.
• The factory default setting for BALANCE is “0”
and for FADER is “0”.
2. Touch [BASS].
1. Press the [SOUND] button.
3. Touch
select the item.
Each touch of
on the left of the display to
2. Touch [BALANCE] or [FADER].
BALANCE
switches the
adjustment items as follows:
GAIN ➜ FREQUENCY ➜ Q ➜ GAIN...
0
RTN
4. Touch
on the right of the display to
adjust the setting.
3. Touch
on the right of the display and
∗ The factory default setting for "GAIN" is
"0". (Adjustment range: -6 to +8)
∗ The factory default setting for
"FREQUENCY" is "50". (Adjustment 50/
80/120Hz)
adjust the item as desired.
∗ “BALANCE” can be adjusted within the
range L13 (left side emphasized) and R13
(right side emphasized).
∗ “FADER” can be adjusted within the range
R12 (rear side emphasized) and F12 (front
side emphasized).
∗ The factory default setting for "Q" is "1".
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[SOUND] button to return to the original
mode.
4. Press the [SOUND] button to return to the
original mode.
30
DXZ868RMP
Sound Adjustment
Adjusting the filter frequency
Filter frequency
You can set a filter frequency value best suited
for your speakers.
* This item can be adjusted only when “SUB-
WOOFER” is set to “ON”.
• The factory default setting for FILTER is
“THROUGH”.
Filter adjustment
● SUB-W LPF (Subwoofer Low-Pass Filter)
adjustment
This filter cuts the signals above the selected
frequency value.
Each touch switches the frequency value as
follows:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜
THROUGH...
Select the frequency that suits your subwoofer.
Set to “THROUGH” if you use powered
subwoofers with built-in low-pass filters.
1. Press the [SOUND] button.
2. Touch [FILTER].
3. Touch
on the right of the display to
select the frequency value.
• Select from THROUGH, 50Hz, 80Hz, or
120Hz.
4. Press the [SOUND] button to return to the
original mode.
DXZ868RMP
31
Common Operations
Screen display in the TITLE
INPUT
CD changer mode
DCZ628 connected
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Number of titles
100 titles
The “TITLE INPUT” screen appears when you
enter a title.
FONT
display
Title
display
TEXT
display
1. Either receive the TV station, or play a CD
for which you want to enter the title.
TITLE INPUT
2. Touch [DISP].
3. Touch [INPUT].
DISPLAY EDIT
a
FONT
Me I o dy
a-Z
TEXT
MEMO
RTN
<<
TITLE
P
05
ABCD
BGV
L
-
BLUE
/
MEMO
RTN
RTN
SP/ANA
COLOR
INPUT
The TITLE INPUT screen appears.
FONT display
A : Capital alphabet letters
a : Small alphabet letters
1 : Numbers
4. Touch [ ]/[ ] to move the cursor to indicate
the input position.
TITLE INPUT
: Symbols
A
FONT
A-Z
TEXT
¯
A: Umlaut
MEMO
RTN
Title display
The currently entered title is displayed.
∗ Up to ten characters can be input.
TEXT display
CAUTION
Touch
to select the character to enter.
/
Pressing the reset button clears all user
memories such as titles stored on this unit.
Touching these buttons moves the cursor
indicating input position.
5. Touch
text.
on [FONT] to select the type of
RTN
Touching this cancels entry of titles, and returns
the display to the original screen.
Each touch of
switches the type of
text as follows:
Capital alphabet letters
(space) A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z
Small alphabet letters
a b c d e f g h i j k l m n o p q r s t u v w x y z
Numbers
MEMO
Touching this stores the title that was input, and
returns the display to the original screen.
Entering titles
0 1 2 3 4 5 6 7 8 9
Symbols
You can give TV stations, CDs a title up to 10
characters long. These titles can be displayed
when broadcasts are received or when playing
CDs.
Umlaut
The number of titles that can be entered is as
follows:
Å Ä Ë É E Ê Ï Æ Ø å ä ë é e ê ï ö ü æ ø
6. Touch
on [TEXT] to determine the
Mode
CD mode
TV mode
Number of titles
50 titles
20 titles
characters to enter.
7. Repeat steps 4 to 6 to enter the title.
8. Touch [MEMO].
You will hear a long beep, and the title is
stored in memory.
32
DXZ868RMP
Common Operations
Clearing titles
Changing settings
1. Either receive the TV station, or play a CD
file whose title you want to clear.
Selecting setting items
1. Press the [ADJ] button.
2. Touch [DISP].
The mode changes to the adjust mode.
3. Touch [INPUT].
ADJ
1
1
4. Touch and hold [RTN] for 2 seconds or
APPEA-
RANCE
SOUND
TUNER
SETTING
longer to erase the title.
5. Touch [MEMO].
RECENT
RTN
∗ Erasing is performed by overwriting with a
blank title.
2. Touch [APPEARANCE], [SOUND],
[TUNER], or [SETTING].
3. Touch
on the left of the display to
Cellular telephone mute
select the item to set.
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
4. When “ENT” is displayed at the right of the
display, touch [ENT] to switch to the
adjustment details display.
∗ This function is not compatible with all cellular
telephones. Contact your local authorized
Clarion dealer for information on proper instal-
lation and compatibility.
5. Touch
on the right of the display to
set the details.
■ To return to the original mode
1. Press the [ADJ] button again.
■ To call up the last operated item
1. Touch [RECENT].
DXZ868RMP
33
Common Operations
● Setting items
Main item
Sub item
APPEARANCE
MSG INFO
• Setting the message display ON/OFF (cf. page 35)
MSG INPUT
• Message information input (cf. page 35)
DIMMER IN
• Auto-dimmer setting (cf. page 35)
DMR LEVEL
• Setting the dimmer level (cf. page 36)
BRIGHT
• Adjusting the display brightness (cf. page 36)
BLINK LED
• Making the LED blink when DCP is removed (cf. page 36)
BEEP
• Setting beep (cf. page 36)
SCROLL SPD
• Adjusting the scroll speed (cf. page 37)
SRC ICON
• Setting the source icon display (cf. page 37)
SOUND
TUNER
SUB WOOFER
• Setting sub woofer speaker ON/OFF (cf. page 37)
AMP CANCEL
• Setting internal amplifier use ON/OFF (cf. page 37)
LINK ACT
• Setting the AF function between RDS and DAB (cf. page 19)
LANGUAGE
• Setting the PTY screen language (cf. page 23)
TV AREA
• Setting the TV area (cf. page 46)
TV DIVER
• Setting TV diversity (cf. page 46)
SETTING
AUX/TEL
• Setting AUX and TEL (cf. page 38)
AUX SENS
• Setting the portable audio (AUX) input level (cf. page 38)
TEL-SP
• Setting the car speaker output for the cellular phone (Optional TEL-002)
(cf. page 38)
TEL-SWITCH
• Cellular phone interrupt setting (cf. page 39)
CALIBRATE
• Setting the auto-volume function (cf. page 39)
SYSTEM CHECK
• Performing a system check (cf. page 39)
CODEMATIC
• Setting security (cf. page 40)
SLIDE CONT
• Setting the slide direction of the slide buttons (cf. page 40)
34
DXZ868RMP
Common Operations
6. Touch
text.
on [FONT] to select the type of
Displaying messages (MSG
INFO)
Each touch of
text. For details, see page 32.
switches the type of
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
7. Touch on [TEXT] to determine the
character to enter.
• The factory default setting is “OFF”.
8. Repeat steps 5 to 7 to enter the message.
1. Press the [ADJ] button to set to the adjust
9. Touch [MEMO].
mode.
You will hear a long beep, and the message
is stored in memory.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
10. Press the [ADJ] button to return to the
select "MSG INFO".
original mode.
ADJ APPEARANCE
MSG INFO
OFF
Setting the auto-dimmer
(DIMMER IN)
RTN
This function allows you to dim the lighting of
the display matched to the illumination or the
brightness inside your car.
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
Select either “AUTO” (interlocked to the
brightness inside your car) or “ILLUMI”
(interlocked to the illumination inside your car)
as the auto-dimmer setting.
original mode.
Entering messages to display
in message information (MSG
INPUT)
• When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
• Set the dimmer setting at DMR LEVEL.
• The factory default setting is “AUTO”.
• Up to 30 characters can be entered.
• The factory default setting is “Active MatriX
Control System”.
1. Press the [ADJ] button to set to the adjust
1. Press the [ADJ] button to set to the adjust
mode.
mode.
2. Touch [APPEARANCE].
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
3. Touch
on the left of the display to
select “DIMMER IN”.
select "MSG INPUT".
ADJ APPEARANCE
ADJ-APPEARANCE
D I MMER IN
AUTO
[
]
ENT
MSG INPUT
RTN
RTN
4. Touch
on the right of the display to
4. Touch [ENT].
select “AUTO” or “ILLUMI”.
The mode changes to the message entry
mode.
5. Press the [ADJ] button to return to the
original mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
A
FONT
A c t i v e M a t
A-Z
TEXT
MEMO
RTN
DXZ868RMP
35
Common Operations
Setting the dimmer level
(DMR LEVEL)
Making the LED blink when
DCP is removed (BLINK LED)
This function allows you to set how much the
displayed is to be dimmed.
You can make the LED on this unit blink when
the DCP is removed.
• The factory default setting is “3”.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
1. Press the [ADJ] button to set to the adjust
mode.
mode.
2. Touch [APPEARANCE].
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
3. Touch
on the left of the display to
select “DMR LEVEL”.
select “BLINK LED”.
ADJ APPEARANCE
ADJ APPEARANCE
DMR LEVEL
3
BL INK LED
OFF
RTN
RTN
4. Touch
on the right of the display to
4. Touch
on the right of the display to
set the dimmer level.
select “ON” or “OFF”.
∗ Select one of OFF (dimming OFF, bright),
1 (slightly dimmed) to 5 (dark).
5. Press the [ADJ] button to return to the
original mode.
5. Press the [ADJ] button to return to the
original mode.
Setting the beep for when
buttons are operated (BEEP)
Adjusting the brightness of
the display (BRIGHT)
The short or long high-pitched tone you hear
when a button is operated is called a “BEEP”.
You can adjust the brightness of the display to
match the mounting angle of the unit.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
• The factory default setting is “5”.
mode.
1. Press the [ADJ] button to set to the adjust
2. Touch [APPEARANCE].
mode.
3. Touch
on the left of the display to
2. Touch [APPEARANCE].
select “BEEP”.
3. Touch
on the left of the display to
ADJ APPEARANCE
select “BRIGHT”.
BEEP
OFF
ADJ APPEARANCE
RTN
BRIGHT
5
RTN
4. Touch
on the right of the display to
select “ON” or “OFF”.
4. Touch
on the right of the display to
5. Press the [ADJ] button to return to the
adjust the brightness.
∗ This setting item can be adjusted within
the range 1 to 12.
original mode.
Adjust this setting item while viewing how
the appearance of the display changes.
5. Press the [ADJ] button to return to the
original mode.
36
DXZ868RMP
Common Operations
Adjusting the title scroll
speed (SCROLL SPD)
Setting speaker ON/OFF
(SUB-WOOFER)
This feature allows you to slow down the scroll
speed when the scroll speed is too fast, making
it difficult to view the screen.
Set the sub-woofer (SUB-WOOFER) ON/OFF.
Be sure to set this setting to “OFF” when there is
no sub-woofer.
• The factory default setting is “SPEED 1”.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
1. Press the [ADJ] button to set to the adjust
mode.
mode.
2. Touch [APPEARANCE].
2. Touch [SOUND].
3. Touch
on the left of the display to
3. Touch
on the right of the display to
select “SCROLL SPD”.
select "ON" or "OFF".
ADJ APPEARANCE
ADJ SOUND
SCROLL SPD
1
SUB WOOFER
ON
RTN
RTN
4. Touch
on the right of the display to
4. Press the [ADJ] button to return to the
adjust the sensitivity.
∗ This setting item can be adjusted within
the range SPEED 1 to SPEED 4.
original mode.
5. Press the [ADJ] button to return to the
Setting internal amplifier use
ON/OFF (AMP CANCEL)
original mode.
Set internal amplifier use ON/OFF matched to
whether or not an external amplifier is used.
Setting the source icon
(SRC ICON)
Set AMP CANCEL to “ON” (internal amplifier
use OFF) when an external amplifier is
connected and the internal amplifier is not used.
You can change the source icon on the display.
• The factory default setting is “ICON”.
• The factory default setting is “OFF” (internal
amplifier used).
1. Press the [ADJ] button to set to the adjust
mode.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
2. Touch [SOUND].
3. Touch
on the left of the display to
select “SRC ICON”.
3. Touch
on the left of the display to
select “AMP CANCEL”.
ADJ APPEARANCE
ADJ SOUND
SRC I CON
I CON
AMP CANCEL
OFF
RTN
RTN
4. Touch
on the right of the display to
select “ICON” or “SPE/ANA”.
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
5. Press the [ADJ] button to return to the
original mode.
DXZ868RMP
37
Common Operations
3. Touch
on the left of the display to
AUX function
select "AUX SENS".
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
ADJ SETTING
AUX
MID
SENS
RTN
Selecting AUX / TEL
4. Touch
set the input level.
∗ Select LOW, MID or HIGH.
Notes:
• When the input level is overloaded, “OVERLOAD”
appears. Adjust AUX SENS or the input level so
that “OVERLOAD” disappears.
on the right of the display to
You can listen to sound and music from external
devices, or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected
to this unit, you can select the TEL mode or
AUX mode.
• The factory default setting is “AUX”.
5. Press the [ADJ] button to return to the
1. Press the [ADJ] button to set to the adjust
original mode.
mode.
2. Touch [SETTING].
Setting the car speaker
output for the cellular phone
(Optional TEL-002)
3. Touch
on the left of the display to
select “AUX/TEL”.
ADJ SETTING
AUX/TEL
AUX
• To output telephone calls, set the cellular
phone.
RTN
• The factory default setting is “RIGHT”.
1. Press the [ADJ] button to set to the adjust
4. Touch
select “AUX” or “TEL”.
AUX:
on the right of the display to
mode.
2. Touch [SETTING].
The AUX/TEL input cable is for external
Audio input.
TEL:
The AUX/TEL input cable is for cellular
phone audio input.
3. Touch
on the left of the display to
select “TEL-SP”.
ADJ SETTING
TEL-SP
RIGHT
5. Press the [ADJ] button to return to the
RTN
original mode.
4. Touch
select “LEFT” or “RIGHT”.
LEFT:
on the right of the display to
Setting the input level (AUX
SENS) of portable audio (AUX
mode)
Telephone calls can be heard on the front
left speaker connected to this unit.
RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is “MID”.
5. Press the [ADJ] button to return to the
original mode.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
38
DXZ868RMP
Common Operations
3. Touch
on the left of the display to
Cellular phone interrupt
setting
select “CALIBRATE”.
ADJ SETTING
If you connect this unit and your cellular phone
with a unit (Optional, TEL-002), you can listen to
your telephone calls on your car speakers.
[
]
CALIBRATE
START
RTN
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
4. Accelerate to a speed of 50 km.
mode.
5. When you reach 50 km, touch [START].
Calibration is executed.
2. Touch [SETTING].
After 2 seconds or longer, you will hear a
long beep, and “SUCCESSFUL” will appear
on the display.
If you hear a short beep, this indicates that
calibration failed. Repeat the procedure from
step 4.
3. Touch
on the left of the display to
select “TEL-SWITCH”.
ADJ SETTING
TEL-SWITCH
OFF
RTN
6. Next, adjust the sensitivity. Touch
[SETTING].
4. Touch
on the right of the display.
Each time you touch, the setting changes in
the following order:
7. Touch
on the left of the display to
select “A-VOL SENS”.
OFF ➜ ON ➜ MUTE ➜ OFF...
ADJ SETTING
OFF:
A-VOL SENS
LOW
This unit continues normal operation even
when the cellular phone is used.
RTN
Note:
8. Touch
on the right of the display.
• When connecting a hands-free kit, make sure
that the setting is ON to receive the telephone
audio through the system.
Each time you touch, the setting changes in
the following order:
OFF (no change in volume) ➜ LOW (change
in volume: small) ➜ MID-LOW ➜ MID ➜
MID-HIGH ➜ HIGH (change in volume:
large) ...
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
MUTE:
9. Press the [ADJ] button to return to the
original mode.
The sound from this unit is muted during
telephone calls.
Performing a system check
(SYSTEM CHECK)
5. Press the [ADJ] button to return to the
original mode.
This function allows you to perform a system
check when an external equipment is connected
to this unit.
Setting the auto-volume
function
1. Press the [ADJ] button to set to the adjust
mode.
(CALIBRATE/A-VOL SENS)
2. Touch [SETTING].
You can automatically change the volume to
match your car's speed.
3. Touch
on the left of the display to
select “SYSTEM CHECK”.
• The factory default setting is “LOW”.
ADJ SETTING
1. Press the [ADJ] button to set to the adjust
[
]
SYSTEM
START
CHECK
mode.
2. Touch [SETTING].
RTN
DXZ868RMP
39
Common Operations
4. Touch [START].
Here, select the item for which “INPUT” is
The confirmation display appears.
displayed at the right of the display.
5. Touch [OK].
6. Touch [INPUT].
The Touch Code display appears.
ADJ SETTING
7. Enter the touch code.
OK
CANCEL
∗ Touch [1] to [4] at the bottom of the display
at random. You can also repeatedly touch
the same number.
After this operation, the display returns to
the original mode.
CODE MATIC
1
2
3
4
Using the security function
(CODEMATIC)
When you touch 4 times, and 4 indicators
light, you will hear a long beep, and the
original mode is returned to.
This function prevents persons who do not know
the touch sequence from easily operating this
unit. The Touch Code display appears when
DCP is attached and the power is turned ON
with “CODEMATIC” set to “ON”.
■ To cancel CODEMATIC
If you have forgotten the touch order, either
touch [4], [1], [3] and then [2] in that order, or
press [SCN] on the remote control unit.
If you touch the display in this screen in the
preset order, “SUCCESSFUL” is displayed and
the power is turned OFF.
When the power is next turned ON, the Touch
Code display does not appear, and the main
display in the radio mode or CD mode is
displayed.
Setting the slide direction of
the slide buttons (SLIDE
CONT)
• The factory default setting is “OFF”.
This function allows you to set the direction of
the left and right slide buttons.
1. Press the [ADJ] button to set to the adjust
mode.
• The factory default setting is “UP ➜ +”.
2. Touch [SETTING].
1. Press the [ADJ] button to set to the adjust
3. Touch
on the left of the display to
mode.
select “CODEMATIC”.
2. Touch [SETTING].
ADJ SETTING
3. Touch
on the left of the display to
CODEMAT I C
OFF
select “SLIDE CONT”.
RTN
ADJ SETTING
SLIDE CONT
UP
2 types of items are displayed for
“CODEMATIC”, items for which “ON” or
“OFF” is displayed at the right of the screen,
and items for which “INPUT” is displayed at
the right of the screen. Here, select the item
for which “ON” or “OFF” is displayed at the
right of the display.
RTN
4. Touch
on the right of the display to
select “UP ➜ +” or “DOWN ➜ +”.
5. Press the [ADJ] button to return to the
original mode.
4. Touch
select “ON” or “OFF”.
5. Touch on the left of the display to
select “CODEMATIC”.
on the right of the display to
ADJ SETTING
CODEMATIC
INPUT
RTN
40
DXZ868RMP
7. OPERATIONS OF ACCESSORIES
CD Changer Operations
Playing time display
Î00:01: The playing time is displayed.
CD changer
When an optional CD changer is connected
through the CeNET cable, this unit can control
CD changer operations. This unit can be
connected to a total of 2 CeNET-wired CD
changers.
Track No. display
Touching
or
allows you to select
the track to play, or fast-forward/fast-rewind
tracks.
Title display
■ When 2 CD changers are connected
The selected title is displayed.
Press the [SRC] button to select the changer
connected to this unit. (Each press of the [SRC]
button switches the changer.)
Disc No. display
Touching
selects discs.
• If the CD changer does not contain a
magazine, “NO MAGAZINE” is displayed, and
if the magazine does not contain a CD, “NO
DISC” is displayed.
• For details on the title display, see “Switching
the title display” (cf. page 15).
s
Touching this pauses or resumes play.
DISP
The display contents can be changed.
a/d (only in the simple operation display)
Touching these selects the track to play.
Touching and holding these fast-forwards/fast-
rewinds tracks.
Screen displays in the
changer mode
/
(Only in the simple operation
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select changer
modes.
display)
Touching these buttons selects the disc to play.
CAUTION
Track No.
display
Title
display
Disc No.
display
CD-ROM discs cannot be played from every
CD changer. This depends on the model.
Note:
01
1
TELL ME
• Some CDs recorded in the CD-R/CD-RW mode
may not be usable.
TRACK
DISC
CT
2:45
DISP
03:09
DISP
Playing time
display
s
Selecting the changer mode
1. Press the [SRC] button to select the changer
mode.
● Simple operation display
∗ Each time you press the [SRC] button, the
display switches as follows:
Radio ➜ (DAB) ➜ CD/MP3 ➜
(CD changer) ➜ (DVD changer) ➜ (TV) ➜
AUX ➜ Radio...
Pressing and holding [MODE] button for 2
seconds or longer switches the simple operation
display.
a/d
∗ The mode of equipment that is not
connected is not displayed.
Play starts automatically when the mode
changes to the changer mode.
TELL ME
TRACK
DISC
CT
2:45
DISP
03:29
1
01
DXZ868RMP
41
CD Changer Operations
2. Touch [TRACK-SCAN].
Pausing play
1. Touch [s].
∗ Scan play starts from the next track after
the track currently being played.
■ To resume play
■ To cancel scan play
1. Touch [s] again.
1. Press the [MODE] button.
Selecting a CD
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected changer. This function
continues automatically until it is canceled.
1. Touch
select a disc.
on the disc No. display to
Play starts.
∗ If magazine does not contain the disc you
selected, the No. for that disc is not
displayed.
Disc scan play is useful when you want to select
a desired disc.
1. Press the [MODE] button.
2. Touch [DISC SCAN].
Selecting a track
1. To listen to the next track, touch
track display.
∗ Disc scan play starts from the next disc
after the disc currently being played.
on the
■ To cancel disc scan play
2. To listen to the previous track, touch
twice on the track display.
1. Press the [MODE] button.
Touching
touch
plays the next track. If you
more times, the track advances
Repeat play
ahead to the track for the number of times
you touched
Touching
touch
to the track for the number of times you
touched
Repeat play continuously plays the current track.
This function continues automatically until it is
canceled.
and that track is played.
plays the previous track. If you
more times, the track moves back
1. Press the [MODE] button.
and that track is played.
twice on the track display
2. Touch [TRACK RPT].
∗ If you touch
while the start of the track is being played,
the track 2 tracks back is sometimes
played.
■ To cancel repeat play
1. Press the [MODE] button.
Disc repeat play
Fast-forward/fast-rewind
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
canceled.
1. To fast-forward, touch
display.
on the track
2. To fast-rewind, touch
display.
on the track
1. Press the [MODE] button.
2. Touch [DISC RPT].
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is
canceled.
■ To cancel disc repeat play
1. Press the [MODE] button.
The scan play function is useful when you want
to select a desired track.
1. Press the [MODE] button.
42
DXZ868RMP
CD Changer Operations
Random play
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is canceled.
1. Press the [MODE] button.
2. Touch [TRACK RDM].
■ To cancel random play
1. Press the [MODE] button.
Disc random play
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is canceled.
1. Press the [MODE] button.
2. Touch [DISC RDM].
■ To cancel disc random play
1. Press the [MODE] button.
DXZ868RMP
43
TV Operations
Reception band display
TV tuner function
TV1 : Band name
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV, you need a TV tuner and
a monitor.
Preset No. display
Touching
on the right slide button in the
standard operation display selects a preset
memory.
Touching [PRESET] displays the preset memory
number list.
Screen displays in the TV
mode
PS/AS
Touching this starts a preset scan.
Touching and holding this for 2 seconds or
longer starts an auto store.
Touching this during the preset scan/auto scan
ends the operation.
● Standard operation display
The standard operation display appears by
pressing the [SRC] button to select the TV
mode.
Reception
Channel display
band display
Preset No.
display
BAND
Touching this switches the reception band.
Touching and holding this for 1 second or longer
toggles between the manual tuning mode and
the seek tuning mode.
Title display
3ch
TV1
P1
a/d (only in the simple operation display)
Touching these buttons enables seek tuning or
step tuning (in the manual tuning mode).
Touch and holding these buttons enables quick
tuning (in manual tuning mode).
MANU
P.CH
CT
2:45
PRESET
BAND
PS AS
DISP
DISP
PRESET
PS/AS
BAND
SEEK/MANU
indicator
DISP
The display contents can be changed.
● Simple operation display
Pressing and holding the [MODE] button for 2
seconds or longer switches the simple operation
display.
Selecting the TV mode
1. Press the [SRC] button to select the TV
mode.
a/d
Each press of the [SRC] button switches the
mode as follows:
Radio ➜ (DAB) ➜ CD/MP3 ➜
(CD changer) ➜ (DVD changer) ➜ (TV) ➜
AUX ➜ Radio...
TV1
MANU
3ch
P.CH
P1
CT
2:45
PRESET
BAND
PS AS
DISP
∗ The mode of equipment that is not
connected is not displayed.
Channel display
3ch: The channel currently being received is
displayed.
Switching the reception band
1. Touch [BAND] to switch the reception band.
Each touch of [BAND] switches the
reception band.
Touching
or
in the standard
operation display allows you to perform seek
tuning or manual tuning.
Title display
The name of the station currently being received
is displayed.
TV1 ➜ TV2 ➜ TV1...
VTR : In video mode
Touching these switches the display.
44
DXZ868RMP
TV Operations
Seek tuning
Preset memory
Seek tuning is a function for automatically tuning
stations with good reception.
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
1. Touch and hold [BAND] for 1 second or
longer while “MANU” is displayed.
Automatic tuning is possible when “SEEK” is
displayed.
1. Touch [BAND] to switch the reception band.
2. Operate the channel display to select the
station to store to.
2. Touch
on the channel display.
“SEEK UP/SEEK DOWN” is displayed, and
tuning starts.
Tuning automatically stops at stations with
good reception.
3. Touch [PRESET].
The preset memory No. list is displayed.
4. Touch and hold the preset No. to store for 2
seconds or longer.
You will hear a long beep, and the station is
stored in memory.
■ To cancel tuning
1. Touch
on the channel display again.
Auto store
Manual tuning
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
There are 2 ways available: quick tuning and
step tuning.
1. Touch and hold [PS/AS] for 2 seconds or
longer.
In the step tuning mode, the frequency changes
1 step at a time. In the quick tuning mode, you
can quickly tune the desired frequency.
“A-STORE” appears on the display.
∗ Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
1. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
2. Operate the channel display to tune to a
channel on which there is a broadcast.
● Step tuning
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
Touch
● Quick tuning
Touch
stops when you take your finger away from the
panel.
on the channel display.
• When there are fewer than 6 stations with good
reception, low frequencies are automatically
returned to, and auto store is performed again. If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
on the channel display. Tuning
Recalling a preset station
Preset scan
This function allows the user to select a preset
station.
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch [PRESET].
The preset memory No. list is displayed.
1. Touch [PS/AS].
2. Touch the preset memory No.
“P-SCAN” appears on the display.
∗ The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
∗ The station can also be tuned by touching
in the standard operation display.
■ To cancel tuning
1. Touch [RTN].
DXZ868RMP
45
TV Operations
3. Touch
on the left of the display to
■ To cancel the preset scan
select [TV DIVER].
1. Touch [PS/AS].
ADJ TUNER
“P-SCAN” disappears, and the stations that
were being received when [PS/AS] was
touched are received next.
TV DIVER
ON
RTN
4. Touch
on the right of the display to
Watching a video
select [ON] or [OFF].
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
5. Press the [ADJ] button to return to the
original mode.
1. Press the [MODE] button.
2. Touch [TV/VTR].
∗ Every time you touch this, the function
switches between TV and VTR.
Setting the TV area
(TV AREA)
When you select the TV area (TV reception
area), the TV tuner area setting changes.
• The factory default setting is “GERMANY”.
1. Press the [ADJ] button to set the adjust
mode.
2. Touch [TUNER].
3. Touch
on the left of the display to
select “TV AREA”.
ADJ TUNER
TV AREA
GERMANY
RTN
4. Touch
on the right of the display to
select the area.
5. Press the [ADJ] button to return to the
previous mode.
Setting the TV Diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
• Set this item to “OFF” when a TV diversity
antenna is not in use.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [TUNER].
46
DXZ868RMP
Digital Radio / DAB Operations
DAB control function
Switching programmes
1. Press the [SRC] button to select the DAB
When a CeNET cable is used to connect a DAB
(Optional, DAH913 or DAH923), all functions
can be operated.
mode.
2. Touch
switch programmes in the DAB station.
Note:
on the left of the display to
Listening to the DAB station
1. Press the [SRC] button to select the DAB
• The programme name may be the same
depending on the DAB programme.
mode.
Notes:
Programme scan
• The display shown in the normal reception mode
and the preset reception mode is the same as
that when a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB station.
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
• When the strength of DAB signals is weak, audio
output is muted.
1. Press the [SRC] button to select the DAB
mode.
2. Touch [S-SCAN].
Seek tuning
1. Press the [SRC] button to select the DAB
“S-SCAN” lights up and this unit starts
scanning each programme for 10 seconds
sequentially.
Each time the main unit scans, the
programme name is shown in the display.
mode.
2. Touch and hold [BAND] for 1 second or
longer if “MANU” is displayed.
Seek tuning is possible when “SEEK” is
displayed.
3. To stop programme scan when a desired
programme is tuned in touch [S-SCAN].
3. Touch
on the left of the display.
“DAB” lights up in the display when the main
unit receives a DAB station.
∗ The main unit stops the seek tuning when
it cannot find a DAB station. The display
returns to the original mode.
Manual memory
The main unit has a manual memory function for
DAB programmes. Up to 18 programmes (6
programmes each) can be preset to the preset
buttons.
[M1], [M2] and [M3]
Manual tuning
1. Press the [SRC] button to select the DAB
1. Press the [SRC] button to select the DAB
mode.
2. Touch [BAND] to select any one shown
mode.
above.
2. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
3. Touch [PRESET].
The preset memory No. list is displayed.
4
Touch and hold the preset No. to be stored
for 2 seconds or longer.
3. Touch
on the left of the display to
You will hear a long beep, and the station is
stored to memory.
If you hear a short beep, the station is not
stored to memory. Repeat the procedure
from step 1.
tune the station.
∗ If no operation is performed for more than
7 seconds, manual tuning is cancelled and
the display returns to the seek turning
mode.
Note:
• Interrupt programmes (PTY or INFO) cannot be
written to manual memory.
DXZ868RMP
47
Digital Radio / DAB Operations
Notes:
Recalling a preset
programme
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP
broadcast is transmitted from an RDS station. In
this case, press the [TA] button to perform TP
seek tuning. Press the [TA] button again to return
to the previous mode.
1. Press the [SRC] button to select the DAB
mode.
2. Touch [BAND].
Each touch of [BAND] changes the display
in the following order:
M1 ➜ M2 ➜ M3 ➜ M1...
INFO (Announcement)
3. Touch
on the right of the display to
In the INFO standby mode, when the selected
announcement programme starts, the main unit
automatically switches to the selected
announcement programme.
recall a preset programme.
AF function
● To set the INFO standby mode
If you press and hold the [TA] button for 1
second or longer, “INFO” lights in the display
and the main unit is set to the INFO standby
mode until the selected announcement is
broadcast.
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
• The factory default setting is “ON”.
• If the reception of the current broadcast
station deteriorates, “SEARCH” appears in the
display and the radio searches for the same
programme on another frequency.
• For details on the “AF function”(cf. page 19) ,
refer to the section “RDS operation” of the
respective owner's manual.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected
announcement broadcast is being received,
reception of the selected announcement
broadcast is cancelled and the main unit enters
the INFO standby mode.
● To switch the AF function ON
● To switch the AF function OFF
● AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit automatically switches to receive the
broadcast with the better reception.
● To cancel the INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
● Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
TA (Traffic Announcement)
You can set ON for up to 6 information items.
You can select any of the 6 items below:
When a traffic announcement broadcast starts
in the TA standby mode, the traffic
announcement broadcast is received as top
priority regardless of the function mode. Traffic
programme (TP) automatic tuning is also
possible.
INFORMATION item
ENGLISH
Travel
Warning
News
Contents
Transport flash
Warning / Service
News flash
• This function can only be used when “TP” is lit
in the display. When “TP” is lit, this means that
the DAB or RDS broadcast station being
received has traffic announcement
programmes.
Weather
Event
Special
Area weather flash
Event announcement
Special event
• For details on “TA” (cf. page 20), refer to the
section “RDS operation” of the respective
owner's manual.
● To set the TA standby mode
● To cancel the TA standby mode
● To search for a TP station
48
DXZ868RMP
Digital Radio / DAB Operations
1. Press the [MODE] button.
Switching the PTY and INFO
display language
2. Touch [INFO SELECT] to enter the “INFO
SELECT” mode.
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
3. Touch
on the left of the display to
select an information item.
You can select any of 6 items:
• The factory default setting is “ENGLISH”.
• For details on “Switching the PTY display
language” (cf. page 23), refer to the section
“RDS operation” of the respective owner's
manual.
Travel ➜ Warning ➜ News ➜ Weather ➜
Event ➜ Special ➜ Travel...
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Touch [RTN].
Volume setting of TA, INFO,
emergency broadcast
(ALARM) and PTY
PTY
This function enables you to listen to the
selected programme type regardless of the
function mode.
The volume for TA, INFO, ALARM and PTY
interrupt broadcasts can be set during TA, INFO,
ALARM and PTY interrupt broadcasts. Perform
the following operation depending on the
connected model.
• One common PTY can be selected for DAB or
RDS.
• Of DAB PTY and RDS PTY, the PTY which is
received earlier takes priority over the other.
• PTY broadcasts are not yet available in all
countries.
• In the INFO standby mode, INFO stations
have priority over PTY stations.
• In the TA standby mode, TP stations have
priority over PTY stations.
• The factory default setting is “15”.
During a TA, INFO, ALARM or PTY interrupt
broadcasts, turn the [ROTARY] knob clockwise
or counterclockwise to set the volume to a
desired level (0 to 33).
• When the TA, INFO, ALARM or PTY interrupt
broadcast ends, the volume returns to the
level that was active before the interrupt
broadcast.
• For details on “PTY”(cf. page 21) , refer to the
section “RDS operation” of the respective
owner's manual.
● To set the PTY standby mode
● To cancel the PTY standby mode
● To cancel a PTY interrupt broadcast
● To select PTY
● PTY seek
● PTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
function mode operations are stopped,
“ALARM” appears in the display, and the
emergency broadcast can be heard.
• For details on “Emergency broadcast” (cf.
page 22), refer to the section “RDS
operation” of the respective owner's manual.
● To cancel an emergency broadcast
DXZ868RMP
49
8. IN CASE OF DIFFICULTY
Problem
Cause
Fuse is blown.
Measure
Power does not
turn on.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No audio when
Amplifier turn-on lead is
Turn the unit off and check each wire for a possible
short. If the amplifier turn-on lead shorts out, cover it
operating the unit shorted to ground or
with amplifiers.
excessive current is required. with insulation such as tape.
Reset button
Nothing happens The microprocessor has
when buttons are malfunctioned due to noise,
Turn off the power, then
remove the DCP by
referencing "Removing
the DCP" (cf. page 10).
Press the reset button for
about 2 seconds with a
thin rod.
pressed.
etc.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty.
cleaning alcohol.
No sound heard. The speaker protection
circuit is operating.
1. Check the speaker connection.
2. Turn down sound volume. Function can also be
restored by turning the power off and on again.
3. If the sound is muted again, consult your store of
purchase.
No sound heard. There is a disc other than a
compact disc or foreign
With the SLOPING CONSOLE open, press and hold
the [Q] button for 3 seconds or longer.
matter already in place.
The foreign matter is forcibly ejected.
MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.
a disc.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Sound skips or is Disc is dirty.
Clean the disc with a soft cloth.
noisy.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
Sound is cut or
skipped.
Noise is
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
generated or
noise is mixed
with sound.
50
DXZ868RMP
Problem
Cause
Measure
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Sound is bad
directly after
power is turned
on.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Wrong filename
File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA
Play list play is
not performed.
correct.
file name.
Use “.M3U” for the file extension of a play list.
DXZ868RMP
51
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
Measure
A DISC is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
A DISC cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
A DISC is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
A DISC inside the CD changer is not
loaded.
This is a failure of CD changer’s mechanism
and consult your store of purchase.
A DISC inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and con-
sult your store of purchase.
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
ERROR P
ERROR R
Parental level error
Region code error
Eject the disc and replace correct region
code disc.
AMP GUARD
The speaker protection circuit is operating.
During this operation, if any volume
operation is performed, the display shows
“AMP GUARD”.
“AMP GUARD” sometimes functions when
special test signals are used.
1. Turn down sound volume. Function can
also be restored by turning the power off
and on again.
(Speaker volume is reduced automatically
when the speaker protection circuit oper-
ates).
2. If the sound is muted again, consult our
service department.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
52
DXZ868RMP
10. SPECIFICATIONS
Radio section
General
Power Supply Voltage:
Tuning System:
PLL synthesizer tuner
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
Receiving Frequencies:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
Current Consumption:
Less than 15 A, 3A
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
Weight / Main unit:
1.7 kg
CD Player
System:
Compact disc digital audio system
Usable Discs:
Compact disc
Weight / Remote control unit:
40 g (including battery)
Frequency Response ( 1 dB):
5 Hz to 20 kHz
Dimensions / Main unit:
178 (W) × 50 (H) × 160 (D) mm
Dimensions / Remote control unit:
44 (W) × 113 (H) × 13 (D) mm
Signal to Noise Ratio (1 kHz):
100 dB
Dynamic Range (1 kHz):
96 dB
Harmonic Distortion:
0.01%
Audio
Output Power:
4 × 31 W (DIN 45324, +B=14.4 V)
Continuous Average Power Output:
18 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
Bass Control Action:
+16, -12 dB
Treble Control Action:
12 dB
Line Output Level (CD 1 kHz):
4 V/F 2ch + 4V/R 2ch
4 V/SUB WOOFER 2ch
Note:
• Specifications and design are subject to change without notice for further improvement.
DXZ868RMP
53
CE DECLARATION OF CONFORMITY
We Clarion Europa GmbH
(supplier's name)
Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMANY
(address)
declare under our sole responsibility that the product
CAR RADIO with CD PLAYER
and REMOTE CONTROLLER
MODEL:DXZ868RMP and RCB176
Product code: PE2698 and RCB176300
TYPE: 1042825
(name, type or model, possibly sources and numbers of items)
to which this declaration relates is in conformity with the following
standard(s) or other normative document(s)
EN 55013:2001 + A1, EN 55020:2002 + A1
(title and/or number and date of issue of the standard(s) or
other normative document(s))
(if applicable) following the provisions of 89/336/EEC Directive.
And following the provisions of 2004/104/EC
Directive,
according to paragraph 3.2.9 of Annex I,
meets the limits defined in paragraph 6.5, 6.6, 6.8 and 6.9 of Annex I
(supplier's comment)
Mörfelden-Walldorf GERMANY
01 JAN 2006
Susumu Yamakawa
President
(Place and date of issue)
(name and signature or equivalent
marking of authorized person)
RefNo 05RCNV002
D.F.DQC05A116
Clarion Co., Ltd.
2005/12 (Abe·Abe) Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.
PE-2698E
280-8337-00
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
|