Clarion BD269RGMP User Manual

Owners manual  
Mode demploi  
Bedienungsanleitung  
Istruzioni per luso  
Gebruiksaanwijzing  
Manual de instrucciones  
Bruksanvisning  
Manual de instruções  
DB268RMP  
BD269RMP  
BD269RGMP  
CD/MP3 RECEIVER  
RÉCEPTEUR CD/MP3  
CD/MP3-RECEIVER  
RICEVITORE CON LETTORE CD/MP3  
CD/MP3-RECEIVER  
RECEPTOR CON REPRODUCTOR DE DISCOS CD/MP3  
CD/MP3-SPELARE/RECEIVER  
RECEPTOR CD/MP3  
Thank you for purchasing this Clarion product.  
Please read this owners manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
CAUTIONS:  
OBS!  
This appliance contains a laser system and  
is classified as a CLASS 1 LASER  
Apparaten innehåller laserkomponenten  
som avger laserstrålning överstigande  
gränsen för laserklass 1.  
PRODUCT. To use this model properly,  
read this Owners Manual carefully and keep  
this manual for your future reference. In  
case of any trouble with this player, please  
contact your nearest AUTHORIZED service  
station. To prevent direct exposure to the  
laser beam, do not try to open the enclosure.  
VAROITUS  
Suojakoteloa si saa avata. Laite sisältää  
laserdiodin, joka lähettää näkymätöntä  
silmille vaarallista lasersäteilyä.  
!CAUTION  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED IN THE OWNERS  
MANUAL MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
ADVARSEL.  
Denne mærking er anbragt udvendigt på  
apparatet og indikerer, at apparatet arbejder  
med laserstråler af klasse 1, hvilket betyder,  
at der anvendes laserstråler af svageste  
klasse, og at man ikke på apparatets  
yderside kan blive udsat for utilladelig  
kraftig stråling.  
APPARATET BØR KUN ÅBNES AF  
FAGFOLK MED SÆRLIGT KENDSKAB TIL  
APPARATER MED LASERSTRÅLER!  
Indvendigt i apparatet er anbragt den her  
gengivne advarselsmækning, som advarer  
imod at foretage sådanne indgreb i  
apparatet, at man kan komme til at udsaætte  
sig for laserstråling.  
2
DB268RMP/BD269RMP/BD269RGMP  
Contents  
1. PRECAUTIONS .............................................................................................................................. 3  
Handling Compact Discs ................................................................................................................. 4  
2. CONTROLS .................................................................................................................................... 5  
3. NOMENCLATURE .......................................................................................................................... 6  
Names of the Buttons and their Functions ...................................................................................... 6  
Display Items ................................................................................................................................... 7  
LCD Screen ..................................................................................................................................... 7  
4. REMOTE CONTROL (Optional item) ............................................................................................ 8  
Inserting the Battery ........................................................................................................................ 8  
Functions of Remote Control Unit Buttons ...................................................................................... 9  
5. DCP ............................................................................................................................................... 10  
6. OPERATIONS ................................................................................................................................11  
Basic Operations ............................................................................................................................11  
Radio Operations ........................................................................................................................... 13  
RDS Operation .............................................................................................................................. 15  
CD Mode Operations ..................................................................................................................... 17  
MP3 Mode Operations ................................................................................................................... 18  
7. IN CASE OF DIFFICULTY ............................................................................................................ 21  
8. ERROR DISPLAYS ....................................................................................................................... 21  
9. SPECIFICATIONS ......................................................................................................................... 22  
1. PRECAUTIONS  
1. This unit is applicable for on-road 4 wheel  
vehicle purpose only. Use for tractor, fork  
truck, bulldozer, off road vehicle, 2 or 3  
wheel motor bicycle, marine boat or other  
special purpose vehicle is not appropriate.  
playback may not be possible. If moisture  
forms on the disc, wipe it off with a soft cloth.  
If moisture forms on the optical parts of the  
player, do not use the player for about one  
hour. The condensation will disappear  
naturally allowing normal operation.  
2. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper  
3. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
INFORMATION FOR USERS:.  
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE WARRANTY.  
DB268RMP/BD269RMP/BD269RGMP  
3
Handling Compact Discs  
• Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use  
of such discs may cause misoperation or  
damage.  
Use only compact discs bearing the  
mark.  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
Some CDs recorded in CD-R/CD-RW mode  
may not be usable.  
To remove a compact disc from its storage  
case, press down on the center of the case  
and lift the disc out, holding it carefully by the  
edges.  
• Do not use commercially available CD  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc  
or cause breakdown of the internal  
mechanism.  
Handling  
• Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played.  
Therefore, do not leave them for a long time in  
the car.  
Storage  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any  
roughness from the edge of the disc.  
• Do not expose compact discs to direct  
sunlight or any heat source.  
• Do not expose compact discs to excess  
humidity or dust.  
• Do not expose compact discs to direct heat  
from heaters.  
Ball-point pen  
Roughness  
Cleaning  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the  
center of the compact disc to the  
circumference.  
• Do not use any solvents, such as  
commercially available cleaners, anti-static  
spray, or thinner to clean compact discs.  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
• Never stick labels on the surface of the  
compact disc or mark the surface with a pencil  
or pen.  
• Never play a compact disc with any  
cellophane tape or other glue on it or with  
peeling off marks. If you try to play such a  
compact disc, you may not be able to get it  
back out of the CD player or it may damage  
the CD player.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.  
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.  
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.  
DB268RMP/BD269RMP/BD269RGMP  
4
CONTROLS / LES COMMANDES / REGLER / CONTROLLI  
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS  
2.  
Main unit / Appareil principal / Hauptgerät / Apparecchio principale  
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal  
[
]
ROTARY  
[
]
[
]
DIRECT  
[
]
CD SLOT  
[
]
RELEASE  
[ ]  
Z
[
]
TA  
[
]
RPT  
[
]
]
[
[
]
RDM  
[
]
A-M  
]
SCN  
[
]
[
UP  
[
]
[
]
BND  
DN  
[
]
[
]
SENSOR  
[ ]  
T
[ ]  
D
[
]
SRC  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapital die Frontdiagramme beachten.  
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.  
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.  
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.  
5
DB268RMP/BD269RMP/BD269RGMP  
3. NOMENCLATURE  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).  
Names of the Buttons and their Functions  
[RELEASE] button  
[D] button  
Switch the display indication (Main display,  
clock display).  
Press the [RELEASE] button to unlock the  
DCP.  
MP3 FUNCTION-DISPLAY SELECTION  
[ROTARY] knob  
Adjust the volume by turning the knob  
clockwise or counterclockwise.  
Display changes in the following order: Track  
No. / Play time Folder No. / Track No. ➜  
Title Display Clock Display Track No. /  
Play time...  
Use the knob to perform various settings.  
[CD SLOT]  
CD insertion slot.  
Long press to enter adjustment mode.  
[BND] button  
Switches the band, or seek tuning or manual  
tuning while in the radio mode.  
[Z] button  
Use the button to select one of the three types  
of sound characteristics already stored in  
memory. (Z-Enhancer)  
Plays a first track while in the CD/MP3 mode.  
Press and hold the button to select between  
CD-DA playback and MP3 playback in  
multisession CD.  
[Q] button  
Ejects a CD when it is loaded into the unit.  
[DIRECT] button  
Stores a station into memory or recall it  
directly while in the radio mode.  
[SENSOR] button  
Receiver for remote control unit.  
Operating range: 30° in all directions.  
[TA] button  
Use the button to set the TA (Traffic  
Announcement) standby mode.  
[SRC] button  
Press the button to turn on the power.  
Long press to enter RDS mode.  
Press and hold the button for 1 second or  
longer to turn off the power.  
[RPT] button  
Plays repeatedly while in the CD/MP3 mode.  
Switches the operation mode between radio  
and CD/MP3 mode.  
[RDM] button  
Performs random play while in the CD/MP3  
mode.  
[
] button  
Plays or pauses a CD while in the CD/MP3  
mode.  
[SCN] button  
Performs scan play for 10 seconds for each  
track while in the CD/MP3 mode.  
To enter various setting.  
Performs preset scan while in the radio  
mode. When the button is pressed and held,  
auto store is performed.  
[UP] button  
Play first track of next folder which contain  
MP3 files.  
[A-M] button  
Press and hold the button for 1 second or  
longer to switch the MAGNA BASS EX on/off.  
Key function only available after MP3 indicator  
turned on.  
[DN] button  
Use the button to switch to the audio mode  
(bass/treble, balance/fader).  
Play first track of previous folder which  
contain MP3 files.∗  
[å], [] buttons  
Key function only available after MP3 indicator  
turned on.  
Selects a station while in the radio mode or  
selects a track when listening to a CD/MP3.  
[T] button  
Switches MP3 TITLE display.  
Press and hold the button for 1 second or  
longer to switches the fast-forward/fast-  
backward.  
Press and hold for 1 second to scroll display  
data.  
6
DB268RMP/BD269RMP/BD269RGMP  
Display Items  
LCD Screen  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
DB268RMP/BD269RMP/BD269RGMP  
7
4. REMOTE CONTROL (Optional item)  
If you buy the RCB-176-700 sold separately, you can enjoy the use of the Remote Control function.  
Signal transmitter  
[
]
]
[
[
]
SRC  
BND  
]
[
[
], [  
[
], [  
]
]
]
]
[
[
MUTE  
DISP  
[
TA  
]
PTY  
[
]
[
]
AF  
PS/AS  
Inserting the Battery  
1 Turn over the remote control unit and slide the cover  
in the direction indicated by the arrow in the  
illustration.  
2 Insert the battery (CR2025) into the insertion guides,  
with the printed side (+) facing upwards.  
3 Press the battery in the direction indicated by the  
arrow so that it slides into the compartment.  
4 Replace the cover and slide in until it clicks into  
place.  
Insertion guide  
Notes:  
Misuse may result in rupture of the battery, producing  
leakage of fluid and resulting in personal injury or  
damage to surrounding materials. Always follow these  
safety precautions:  
R
• Use only the designated battery.  
• When replacing the battery, insert properly, with +/–  
polarities oriented correctly.  
• Do not subject battery to heat, or dispose of in fire or  
water. Do not attempt to disassemble the battery.  
• Dispose of used batteries properly.  
8
DB268RMP/BD269RMP/BD269RGMP  
Functions of Remote Control Unit Buttons  
Mode  
Radio  
CD  
MP3  
Button  
[SRC]  
Switches between radio and CD/MP3.  
Plays the first track.  
Top play.  
Plays the first track of the  
current folder.  
Switches reception band.  
[BND]  
[
] , [  
] , [  
]
Increases and decreases volume (in all modes).  
Moves preset channels up  
and down.  
Moves tracks up and down.  
When pressed and held for 1 second: Fast-forward/fast-  
backward.  
[
]
No function  
Switches between playback and pause.  
Switches between playback and pause.  
[
]
Turns mute on and off.  
TA on and off.  
[MUTE]  
[TA]  
[DISP]  
Switches between main display and clock display.  
Switch among main display,  
folder number display,  
TITLE display, clock display.  
[PS/AS]  
Preset scan.  
When pressed and held for 2  
seconds: Auto store.  
Scan play.  
Scan play.  
When pressed and held for  
1 second: Folder scan.  
[AF]  
AF function on and off.  
When pressed and held for 1  
second or longer: REG  
function on and off.  
Repeat play.  
Repeat play.  
When pressed and held for  
1 second: Folder repeat.  
[PTY]  
PTY mode on and off.  
Random play.  
Random play.  
When pressed and held for  
1 second: Folder random.  
Some of the corresponding buttons on the main unit and remote control unit have different functions.  
DB268RMP/BD269RMP/BD269RGMP  
9
5. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (Detachable Control Panel) case to  
prevent scratches.  
Storing the DCP in the DCP case  
Hold the DCP, in the orientation as shown in the  
figure below, and put it into the supplied DCP  
case. (Ensure the DCP is in the correct  
orientation.)  
We recommend taking the DCP with you when  
leaving the car.  
Removing the DCP  
1. Press the [SRC] button for 1 second or  
longer to switch off the power.  
DCP  
2. Press in the [RELEASE] button.  
[
]
RELEASE button  
DCP case  
CAUTION  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not to  
drop it or subject it to strong shocks.  
• When the Release button is pressed and  
the DCP is unlocked, the car’s vibrations  
may cause it to fall. To prevent damage to  
the DCP, always store it in its case after  
detaching it. (See figure above.)  
The DCP is unlocked  
3. Remove the DCP.  
• The connector connecting the main unit  
and the DCP is an extremely important  
part. Be careful not to damage it by  
pressing on it with fingernails, pens,  
screwdrivers, etc.  
DCP  
DCP Rear Panel  
Main Unit Front  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
2. Insert the left side of the DCP into the main  
unit.  
DCP  
connector  
Main unit connector  
2.  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
DCP  
1.  
10  
DB268RMP/BD269RMP/BD269RGMP  
6. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter 2. CONTROLSon page 5 (unfold).  
Setting the Z-Enhancer  
This unit are provided with 3 types of sound  
CAUTION  
Be sure to lower the volume before switching  
off the unit power or the ignition key. The unit  
remembers its last volume setting. If you  
switch the power off with the volume up,  
when you switch the power back on, the  
sudden loud volume may hurt your hearing  
and damage the unit.  
tone effects stored in memory. Select the one  
you prefer.  
The factory default setting is “Z-EHCR OFF”.  
Each time you press the [Z] button, the tone  
effect changes in the following order:  
Z-ENHANCER 1 Z-ENHANCER 2 ➜  
Z-ENHANCER 3 Z-EHCR OFF ➜  
Z-ENHANCER 1...  
Turning on/off the power  
Note:  
Be careful about using this unit for a long time  
without running the engine. If you drain the cars  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
• Z-ENHANCER 1 : bass emphasized  
• Z-ENHANCER 2 : treble emphasized  
• Z-ENHANCER 3 : bass and treble emphasized  
• Z-EHCR OFF  
: no sound effect  
1. Press the [SRC] button.  
Audio mode adjustments  
1. Press the [A-M] button to select the  
adjustment mode. The mode switches as  
follows each time the [A-M] button is  
pressed:  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
3. Press and hold the [SRC] button for 1  
second or longer to turn off the power for the  
unit.  
BASS TREB BAL FAD Previous  
mode  
When the Z-Enhancer function is turned on,  
BASS (Bass) and TREB (Treble) cannot be  
selected.  
Selecting a mode  
1. Press the [SRC] button to change the  
operation mode.  
2. Turning the [ROTARY] knob to adjust the  
selected audio mode.  
BASS (Bass) : Adjustment range: –7 to +7  
TREB (Treble): Adjustment range: –7 to +7  
2. Each time you press the [SRC] button, the  
operation mode changes in the following  
order:  
BAL (Balance): Adjustment range: L13 to R  
13  
Radio mode CD/MP3 mode Radio  
FAD (Fader) : Adjustment range: F12 to  
R12  
mode...  
Note:  
If the CD/MP3 mode is selected when no disc is  
inserted, the display shows NO DISC.  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
Adjusting the volume  
Note:  
During audio adjustment mode, if no operation is  
performed for more than 7 seconds, this mode  
can be cancelled and return to previous mode.  
Turning the [ROTARY] knob clockwise  
increases the volume; turning it  
counterclockwise decreases the volume.  
The volume level is from 0 (minimum) to 33  
(maximum).  
DB268RMP/BD269RMP/BD269RGMP  
11  
Basic Operations  
Turning on/off MAGNA BASS EX  
The MAGNA BASS EX does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
ADJ mode adjustment  
1. Press [D] button more than 1 second at  
POWER ON mode to enter ADJ mode, the  
previous selected ADJ items will be called  
out.  
The factory default setting is off.  
2. Press [D] button again at ADJ mode will  
cancel ADJ mode and return to previous  
display.  
Press and hold the [A-M] button for 1 second or  
longer to turn the MAGNA BASS EX and M-B  
EXin the display lights on or off.  
3. Press [SRC] button will also release ADJ  
mode.  
Switching display  
Press the [D] button to select the desired  
display.  
4. ADJ mode will also be released when current  
source mode is changed. (Mode changes of  
LOADING, EJECT, interruption and  
interruption release)  
The display switches in the following order:  
5. Press [å]/[] button to switch the ADJ  
Main Display Clock (CT) Display ➜  
Main Display …  
mode items,  
SCRN SVR A-SCROLL TEL-SW  
If the display is changed by other button  
operation when the clock (CT) is displayed, the  
clock display returns automatically after the  
operation.  
6. The ADJ mode title will be display for 2  
seconds before showing the ADJ mode  
setting.  
CT (Clock Time) function  
The CT function enables you to display clock  
time only when CT data is received.  
Adjusting screen saver setting  
1. Press the [D] button and press [å]/[]  
button to select SCRN SVR.  
Press the [D] button, the display switches to CT  
(Clock Time).  
2. SS ONor SS OFFwill be display after 2  
seconds.  
When no CT data is received, CT––:––appears  
in the display.  
3. Turn the [ROTARY] knob clockwise to turn  
on the screen saver or counterclockwise to  
turn off the screen saver.  
Note:  
There are some countries and stations where  
clock time data are not transmitted. In some  
areas, the CT may not be displayed correctly.  
4. If screen saver setting is set to on, screen  
saver will be activated after 30 seconds of no  
key operation.  
Illumination dimmer function  
When the illumination line of this unit is  
connected with the car-side illumination signal  
line, the display illumination of this unit dims in  
connection with turning on the car-side  
illumination.  
Adjusting auto-scroll setting  
1. Press the [D] button and press [å]/[]  
button to select A-SCROLL.  
2. SCRL ONor SCRL OFFwill be display  
after 2 seconds.  
3. Turn the [ROTARY] knob clockwise to turn  
on the auto-scroll or counterclockwise to turn  
off the auto-scroll.  
4. If auto-scroll setting is set to on, the MP3 title  
will scroll continuously in MP3 title display  
mode.  
12  
DB268RMP/BD269RMP/BD269RGMP  
Basic Operations  
Radio Operations  
Adjusting telephone interrupt  
Listening to the radio  
1. Press the [SRC] button and select the radio  
mode. The frequency or PS appears in the  
display.  
setting  
This unit requires special wiring to mute the  
audio signal automatically when a cellular  
telephone rings in the car.  
PS: Programme service name  
2. To select a preset band, press the [BND]  
button, then select one of the preset bands  
such as FM1, FM2, FM3 or AM. Every time  
the [BND] button is pressed, the display will  
change as:  
This function is not compatible with all cellular  
telephones. Contact your local authorized Clarion  
dealer for information on proper installation and  
compatibility.  
The factory default setting is TEL OFF.  
1. Press the [D] button and press [å]/[]  
F1 F2 F3 AM F1...  
button to select TEL-SW.  
3. Press the [å] or [] button to tune in the  
2. TEL ONor TEL OFFwill be display after  
desired station.  
2 seconds.  
3. Turn the [ROTARY] knob clockwise to turn  
on the telephone interrupt or  
counterclockwise to turn off the telephone  
interrupt.  
Tuning  
There are 3 types of tuning mode available,  
seek tuning, manual tuning and preset tuning.  
During telephone interrupt, the display shows  
TEL.  
Seek tuning  
There are 2 types of seek tuning: DX SEEK and  
LOCAL SEEK.  
DX SEEK can automatically tune in to  
receivable broadcast stations; LOCAL SEEK  
can tune in to only broadcast stations with a  
good reception sensitivity.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
2. Tune into a station.  
If MANUis lit in the display, press and hold  
the [BND] button for 1 second or longer.  
If TAis lit in the display, TP stations are  
automatically sought.  
GDX SEEK  
Press the [å] or [] button to automatically  
seek a station.  
When the [] button is pressed, the station is  
sought in the direction of higher frequencies; if  
the [å] button is pressed, the station is sought  
in the direction of lower frequencies.  
When seek tuning starts, DXappears in the  
display.  
GLOCAL SEEK  
If you press and hold the [å] or [] button  
for 1 second or longer, local seek tuning is  
carried out.  
Broadcast stations with good reception  
sensitivity are selected.  
When local seeking starts, LOappears in the  
display.  
DB268RMP/BD269RMP/BD269RGMP  
13  
Radio Operations  
Manual tuning  
Auto store  
There are 2 ways available: Quick tuning and  
step tuning.  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the  
quick tuning mode, you can quickly tune the  
desired frequency.  
Notes:  
The only FM band that can store the stations will  
automatically be stored in FM3.  
When the auto store is performed, the station  
previously stored in the memory at that position is  
overwritten.  
If there are fewer than 6 stations with good  
reception, the stations previously stored at the  
remaining [DIRECT] buttons are not overwritten.  
A station already stored in one of [DIRECT]  
buttons cannot be stored in another [DIRECT]  
buttons.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
If MANUis not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
MANUis lit in the display and manual tuning  
is now available.  
2. Tune into a station.  
GQuick Tuning:  
Press and hold the [å] or [] button for 1  
second or longer to tune in a station.  
1. Press the [BND] button and select the  
GStep Tuning:  
desired band (FM or AM (MW/LW)).  
Press the [å] or [] button to manually tune  
2. Press and hold the [ ] button for 1 second  
or longer. The stations with good reception  
are stored automatically to the preset  
channels.  
in a station.  
If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
Recalling a preset station  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory. Pressing the corresponding  
[DIRECT] button recalls the stored radio  
frequency automatically.  
Preset scan  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for a desired station in memory.  
1. Press the [BND] button and select the  
1. Press the [ ] button.  
desired band (FM or AM (MW/LW)).  
2. When a desired station is tuned in, press the  
2. Press the corresponding [DIRECT] button to  
[
] button again to continue receiving that  
station.  
Note:  
recall the stored station.  
Press and hold one of the [DIRECT] buttons  
for 1 second or longer to store that station into  
preset memory.  
Be careful not to press and hold the [ ] button  
for 1 second or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of the [DIRECT] buttons  
for 1 second or longer to store the current  
station into preset memory.  
14  
DB268RMP/BD269RMP/BD269RGMP  
RDS Operations  
RDS (Radio Data System)  
This unit has a built-in RDS decoder system that  
supports broadcast stations transmitting RDS  
data.  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode so you  
can listen to it. Traffic programme (TP)  
automatic tuning is also possible.  
This system can display the name of the  
broadcast station being received (PS) and can  
automatically switch to the broadcast station  
with the best reception as you move long  
distances (AF switching).  
This function can only be used when TPis lit in  
the display. When TPis lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
Also, if a traffic announcement or programme  
type is broadcast from an RDS station, no  
matter what mode you are in, this broadcast is  
received.  
GSetting the TA standby mode  
If you press the [TA] button when only TPis lit  
in the display, TPand TAlight in the display  
and the unit is set into the TA standby mode  
until a traffic announcement is broadcast. When  
a traffic announcement broadcast starts, TRA  
INFOappears in the display.  
Additionally, if EON information is received, this  
information enables automatic switching of other  
preset stations on the same network and  
interruption of the station being received with  
traffic information from other stations (TP). This  
function is not available in some areas.  
If you press the [TA] button while a traffic  
announcement broadcast is being received, the  
traffic announcement broadcast reception is  
cancelled and the unit goes into the TA standby  
mode.  
When using the RDS function, always set the  
radio to FM mode.  
AF : Alternative Frequency  
PS : Programme Service Name  
PTY : Programme Type  
GCancelling the TA standby mode  
With TPand TAlit in the display, press the  
[TA] button. The TAin the display goes off and  
the TA standby mode is cancelled.  
EON : Enhanced Other Network  
TP : Traffic Programme  
If TPis not lit, pressing the [TA] button searches  
for a TP station.  
RDS interrupt does not function during AM radio  
reception.  
GSearching for a TP station  
When TPis not lit, if you press the [TA] button,  
TAin the display lights and the unit  
automatically receives a TP station.  
Manually tuning a regional station  
in the same network  
1. This function is valid when the AF function is  
ON and the REG function is OFF.  
Note:  
If a TP station is not received, the unit continues  
the search operation. Pressing [TA] button again  
goes off TAin the display and stops TP station  
searching.  
Note:  
This function can be used when a regional  
broadcast of the same network is received.  
2. Press any one of the [DIRECT] buttons to  
call out the regional station.  
RDS mode adjustment  
3. If the reception condition of the called out  
station is bad, press the [DIRECT] button of  
the same number. The unit receives a local  
station on the same network.  
Press and hold the [TA] button for 1 second or  
longer to select the RDS mode.  
The mode switches as follows each time the  
[å] or [] button is pressed:  
1
PTY ON  
PTY-S<E>  
AF ON  
REG  
ON 2 ....  
Press [TA] button to exit RDS mode.  
Notes:  
1 PTY-S<E>only available when PTY ON.  
2 REG ONonly available when AF ON.  
DB268RMP/BD269RMP/BD269RGMP  
15  
RDS Operations  
Adjusting PTY  
PTY preset memory  
This function enables you to listen to a  
broadcast of the selected programme type when  
it starts even if the unit is on a function mode  
other than radio.  
1. Press the [TA] button for 1 second or longer  
and press [å]/[] button to select PTY-  
S<E>. Press [ ] to enter PTY selection  
mode.  
Some countries do not yet have PTY broadcast.  
2. Turn the [ROTARY] knob clockwise or  
counterclockwise to select the desired PTY.  
In the TA standby mode, a TP station has priority  
over a PTY broadcast station.  
The 29 types of PTY below can be selected.  
1. Press the [TA] button for 1 second or longer  
and press [å]/[] button to select PTY  
ONor PTY OFF.  
PTY item  
ENGLISH  
NEWS  
Contents  
News  
2. Turning the [ROTARY] knob clockwise to  
PTY ON; or counterclockwise to PTY  
OFF.  
AFFAIRS  
INFO  
Todays events  
Information  
Sports  
SPORT  
PTY selection  
EDUCATE  
DRAMA  
Education  
Drama  
1. Press the [TA] button for 1 second or longer  
and press [å]/[] button to select PTY-  
S<E>. Press [ ] to enter PTY selection  
mode.  
CULTURE  
SCIENCE  
VARIED  
Culture  
Science  
Variety  
2. Press any one of the [DIRECT] buttons.  
Alternatively, turn the [ROTARY] knob  
clockwise or counterclockwise to select the  
desired PTY.  
POP M  
Pop music  
Rock music  
Easy music  
Light music  
Classics  
Other music  
Weather  
Finance  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL  
Below are the factory default settings stored  
for the [DIRECT] buttons.  
PTY item  
Contents  
News  
Preset  
number  
ENGLISH  
NEWS  
1
2
3
4
5
6
INFO  
Information  
Pop Music  
Sport  
For children  
Social  
POP M  
SPORT  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
Religion  
CLASSICS Serious Classical Music  
EASY M Easy Listening Music  
Phone in  
Travel  
3. The PTY select mode is cancelled  
automatically 7 seconds after a PTY is  
selected.  
Leisure  
Jazz  
COUNTRY  
NATION M  
OLDIES  
Country  
Nation music  
Oldies  
PTY seek  
1. Select desired PTY item.  
FOLK M  
DOCUMENT  
Folk music  
Documentaries  
2. Press the [å] or [] button. If you press  
the [] button, the unit seeks a PTY  
broadcast moving up the frequencies; if you  
press the [å] button, it seeks moving down  
the frequencies.  
3. If you press and hold any one of the  
[DIRECT] buttons for 2 seconds or longer,  
the selected PTY is stored into that preset  
channel memory.  
16  
DB268RMP/BD269RMP/BD269RGMP  
RDS Operations  
CD Mode Operations  
Adjusting AF  
Loading a CD  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
Insert a CD into the center of the CD insertion  
slot with the labeled side facing up. LOADING”  
appears in the display, the CD enters into the  
slot and start playing.  
The factory default setting is ON.  
Notes:  
1. Press the [TA] button for 1 second or longer  
and press [å]/[] button to select AF  
ONor AF OFF.  
Do not put your hand, fingers, or foreign objects  
into the CD insertion slot.  
If a CD has already been loaded, another CD  
cannot be inserted. Do not insert another one  
forcefully.  
2. Turning the [ROTARY] knob clockwise to AF  
ON; turning it counterclockwise to AF  
OFF.  
Discs not bearing the  
played with the unit. CD-ROMs cannot be played.  
Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
mark cannot be  
If the reception of the current broadcast  
station deteriorates, SEARCHappears in the  
display and the radio searches for the same  
programme on another frequency.  
Listening to the disc already  
Adjusting REG  
inserted  
When the REG function is ON, the optimum  
regional station can be received. When this  
function is OFF, if the regional station area  
switches as you drive, a regional station for that  
region is received.  
Press the [SRC] button to select the CD/MP3  
mode, the CD will start playing.  
Stopping (Pausing) playback  
While the CD playing, pressing the [ ] button  
will stop the CD and PAUSEindicate.  
The factory default setting is OFF.  
1. Press the [TA] button for 1 second or longer  
and press [å]/[] button to select REG  
ONor REG OFF.  
Press the [ ] button again to resume  
playback.  
2. Turning the [ROTARY] knob clockwise to  
REG ON; turning it counterclockwise to  
REG OFF.  
Ejecting the CD  
Press the [Q] button, then the CD will be  
ejected.  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
Note:  
If the ejected CD is left as it is, it will be reloaded  
after 15 seconds.  
ALARMappears in the display and the  
emergency broadcast can be heard.  
Top function  
GCancelling an emergency broadcast  
Press the [BND] button, then the CD will start  
playing from the first song (track number 1).  
If you press the [TA] button, emergency  
broadcast reception is cancelled.  
For MP3 mode, it will start playing from the first  
song of current folder.  
Volume setting of TA, emergency  
broadcast (ALARM) and PTY  
The volume for TA, ALARM and PTY interrupts  
can be set during TA, ALARM or PTY interrupt.  
The factory default setting is 15.  
During a TA, ALARM or PTY interrupt, turn the  
[ROTARY] knob clockwise or counterclockwise  
to set the volume to the desired level (0 to 33).  
When the TA, ALARM or PTY interrupt ends, the  
volume returns to the level it had before the  
interrupt.  
DB268RMP/BD269RMP/BD269RGMP  
17  
CD Mode Operations  
MP3 Mode Operations  
Selecting tracks (Songs)  
What is MP3?  
Press the [å] or [] button.  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
This audio compression method has penetrated  
into PC users and become a standard format.  
This MP3 features the original audio data  
compression to about 10 percent of its initial  
size with a high quality sound. This means that  
about 10 music CDs can be recorded on a CD-  
R disc or CD-RW disc to allow a long listening  
time without having to change CDs.  
: Playback will start from the next track.  
å : Playback will start from the beginning of  
the track currently playing. When this  
button is pressed again, the CD will play  
from the previous track.  
For MP3 mode, track selection is only valid in  
current folder.  
Fast-forward and fast-backward  
Press and hold the [å] or [] button.  
: To fast-forward  
å : To fast-backward  
For Audio CD mode pressing the [å] or []  
button for 1 second or longer will move forward or  
backward 5 times faster than normal play, and  
pressing it for 3 seconds or longer will do the  
operation 30 times faster.  
Precautions when creating MP3 disc  
GFile extensions  
Always add a file extension .MP3to MP3 file  
by using single byte letters. If you add a file  
extension other than specified or forget to add  
the file extension, the file cannot be played.  
GLogical format (File system)  
When writing MP3 file on a CD-R disc or CD-  
RW disc, please select ISO9660 level 1, 2,  
Joliet or Romeo as the writing software  
format. Normal play may not be possible if the  
disc is recorded on another format.  
For MP3 mode, pressing the [å] or [] button  
for 1 second or longer will move forward or  
backward 10 times faster than normal play.  
Scan play (Intro Music Scan)  
The folder name and file name can be  
displayed as the title during MP3 play but the  
title must be within 16 (Folder Name) or 28  
(File Name) single byte alphabetical letters  
and numerals (excluding an extension).  
At Audio CD press the [SCN] button, the SCN”  
is lit & display shows TRK SCN, then the CD  
will play the first 10 seconds of each track of the  
whole disc. Press the [SCN] button again to  
disengage the unit from scan play.  
GNumber of files or folders  
A scan play will start from the track following the  
one currently playing.  
The MP3 recording media reproducible on this  
unit has the following limitations :  
1. Maximum number of files : 254  
2. Maximum number of folders : 128  
Repeat play  
At Audio CD press the [RPT] button, the RPT”  
is lit & display shows TRK RPT, then the track  
currently playing will be played repeatedly.  
Press the [RPT] button again to disengage the  
unit from repeat play.  
3. Some noise may occur depending on the  
type of encoder software used while  
recording.  
Folder up down function  
1. This function enables you to search for a  
folder on the MP3 CD. The LCD will show  
the target MP3 CD folder.  
Random play  
At Audio CD press the [RDM] button, the RDM”  
is lit & display shows TRK RDM, then the  
entire tracks on the disc will be played at  
random. Press the [RDM] button again to  
disengage the unit from random play.  
[UP] Folder up  
[DN] Folder down  
2. When a desired folder is selected, the CD  
player will play 1st track of target folder.  
Note:  
The folder which contents of no MP3 file will be  
skipped.  
18  
DB268RMP/BD269RMP/BD269RGMP  
MP3 Mode Operations  
MP3 playing order  
Random  
access  
Function  
Random  
Display Indicator  
When selected for play folder up down  
functions, files and folders are accessed in the  
order in which they were written by the CD-  
ROM writer. Because of this, the order in which  
they are expected to be played may not match  
the order in which they are actually played. You  
may be able to set the order in which MP3 are  
to be played by writing them onto a medium  
such as a CD-R with their file names beginning  
with play sequence numbers such as 01to  
99, depending on your CD writer.  
Press the  
[RDM] button track in  
less than 1  
second  
TRK  
RDM”  
RDM”  
current  
folder  
Press the  
Random  
FLDR ALL···”  
[RDM] button track in all  
more than 1 folders  
second  
RDM”  
&
RDM”  
3. Each time the button is pressed, random  
play turns on or off.  
For example, a medium with the following  
folder/file hierarchy is shown below.  
Repeat MP3 CD  
Example of a mediums folder/file hierarchy  
1. This function enables you to replay the track  
or folder you are listening to.  
2. There are 2 types of repeat play accessible  
for MP3 CD; repeat track and repeat current  
folder.  
Repeat  
access  
Function  
Repeat  
Display Indicator  
TRK RPT”  
Press the  
[RPT] button current song RPT”  
less than 1  
second  
Press the  
Repeat  
FLDR ALL···”  
RPT& RPT”  
[RPT] button current  
more than 1 folder  
second  
3. Each time the button is pressed, repeat play  
turns on or off.  
Scan MP3 CD  
1. This function enables you to play the first 10  
seconds of each track in the MP3 folder or  
the first track of each folder.  
2. There are 2 types of scan play accessible for  
MP3 CD; scan track and scan all folders.  
Random MP3 CD  
Scan access Function  
Press the Scan in  
[SCN] button current  
Display Indicator  
1. This function enables you to play all the  
tracks in the MP3 folder or on the disc in  
random order.  
TRK  
SCN”  
SCN”  
less than 1  
folder  
2. There are 2 types of random play accessible  
for MP3 CDs; random track and random all  
folders.  
second  
Press the  
Scan track  
FLDR ALL···”  
[SCN] button in all folder  
more than 1  
SCN”  
&
SCN”  
second  
DB268RMP/BD269RMP/BD269RGMP  
19  
MP3 Mode Operations  
Notes:  
3. Each time the button is pressed, scan play  
turns on or off.  
The folder name will be displayed as ROOT”  
which the file allocates in the root folder.  
The MP3 player decodes each file ID3 TAG ver 2  
by default, if ID3 TAG ver 2 is unavailable, ID3  
TAG ver 1 will be decoded.  
UNICODE ID3 (Chinese, Japanese and etc) is  
not supported.  
Display selection  
1. You can choose the display type for MP3 CD  
by pressing the [D] button.  
To select the next type, press the [D] button  
again.  
CD-DA/MP3 selection on  
The arrangement is shown below.  
multisession CD  
MAIN-1 ..... T02 02 : 18  
1. If a multisession CD which contains CD-DA  
and MP3 files is being inserted, user can  
select either CD-DA or MP3 files to be  
played.  
(Track No., Play time)  
MAIN-2 ..... F03 T05  
(Folder No., track No.)  
2. Default setting for files to be played on  
multisession CD is CD-DA files.  
TITLE ..... FOLDER  
(Folder)  
Refer to Title display mode”  
3. Press the [BND] button for more than 1  
second will toggle between selection of CD-  
DA and MP3 files to be played.  
CLOCK ..... AM 10: 00  
4. When CD-DA type is selected, display will  
show M-S CD. When MP3 type is selected,  
display will show M-S MP3.  
Title display mode  
1. There are 5 types of display for the title  
display mode.  
5. CD-DA/MP3 selection function can only be  
performed in CD/MP3 mode. It will only  
activate after re-insert CD. For example,  
current setting is CD-DA type. Press [BND]  
button for more than 1 second to set MP3  
type. User has to eject CD and re-insert it  
again as to play MP3 files.  
2. To select the next type, press the [T] button  
for less than 1 second.  
The arrangement is shown below.  
After 2 seconds  
6. Types of recording that can be played are as  
follows.  
FOLDER  
TRACK  
ALBUM  
ARTIST  
TITLE  
Folder Title  
Track Title  
Album tag  
Artist Tag  
Title Tag  
Setting  
Set to CD  
Set to MP3  
Disc  
Mixed with CD and Play CD  
MP3 type tracks  
Play MP3  
CD type track only Play CD  
MP3 type track only Play MP3  
Play CD  
Play MP3  
3. The displayed item can be scrolled by  
pressing the [T] button for more than 1  
second.  
7. When a mixed mode CD is loaded and CD is  
set, the track to be played first is MP3 file  
data and no sound is heard.  
4. If a MP3 file does not support for ID3 TAG,  
the display will show NO TAG.  
5. If a MP3 file encode with ID3 TAG header  
but no consist of any TAG information, the  
display will show nothing.  
20  
DB268RMP/BD269RMP/BD269RGMP  
7. IN CASE OF DIFFICULTY  
Problem  
Cause  
Solution  
Power does not turn  
on. (No sound is  
produced)  
Fuse is blown.  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
Incorrect wiring.  
Consult your store of purchase.  
Compact disc cannot Another compact disc is  
Eject the compact disc before loading the new one.  
be loaded.  
already loaded.  
Sound skips or is  
noisy.  
Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.  
after power is turned the internal lens when the  
on.  
car is parked in a humid  
place.  
Nothing happens  
when button are  
pressed. Display is  
not accurate.  
The microprocessor has  
malfunctioned due to noise, the [RELEASE] button and  
etc.  
Turn off the power, then press  
remove the DCP. Press the  
reset button for about 2  
seconds with a thin rod.  
Reset button  
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with  
are dirty. cleaning alcohol.  
8. ERROR DISPLAYS  
I To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a  
warning is issued by various error displays. Follow the corrective measures and remove the fault.  
Error Display  
Corrective Measure  
ERROR 2  
ERROR 3  
ERROR 6  
This error display indicates that a fault has arisen in the  
mechanism of the source unit (for example, the disc cannot  
be ejected).  
Check the source unit.  
This error display indicates that the pickup focus is off  
because of a scratched disc or some other factor during  
source unit play.  
Check the compact disc.  
This indicates that the CDs TOC (table of contents) cannot  
be read, for example because the selected disc is upside-  
down.  
DB268RMP/BD269RMP/BD269RGMP  
21  
9. SPECIFICATIONS  
FM tuner  
Frequency Range: 87.5 MHz to 108 MHz  
Usable Sensitivity: 11 dBf  
Audio  
Output Power: 4 × 20 W (DIN 45324, +B=14.4 V)  
Bass Control Action (100 Hz): 14 dB  
50 dB Quieting Sensitivity: 17 dBf  
Alternate Channel Selectivity: 75 dB  
Stereo Separation (1 kHz): 35 dB  
Frequency Response ( 3 dB): 30 Hz to 15 kHz  
Treble Control Action (10 kHz): 14 dB  
Line Output (with A/C 1 kHz, 10 k ): 1.8 V  
General  
Power Supply Voltage:  
14.4 V DC (10.8 V to 15.6 V allowable),  
negative ground  
AM tuner  
Frequency Range:  
Current Consumption: Less than 15 A  
Speaker Impedance: 4 (4 to 8 allowable)  
Weight: 1.1 kg  
MW: 531 kHz to 1602 kHz  
LW: 153 kHz to 279 kHz  
Usable Sensitivity: 25 µV  
Dimensions:  
178 mm Width × 50 mm Height × 152 mm  
CD player  
System: Compact disc audio system  
Usable Discs: Compact disc  
Depth  
178 mm  
50 mm  
Frequency Response: 10 Hz to 20 kHz ( 1 dB)  
Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A  
Harmonic Distortion: 0.01%  
MP3  
Decode Format: MPEG 1, 2 and 2.5 -Layer 3  
188 mm  
58 mm  
Sampling rate (kHz):  
MPEG-1: 32, 44.1, 48  
MPEG-2: 16, 22.05, 24  
MPEG-2.5: 11.025, 12  
Bit-rate (kbps):  
Notes:  
Specifications and design are subject to change  
without notice for further improvement.  
Please make sure when connecting external  
power amplifier, that you properly, to the car  
chassis, ground the amplifier.  
8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128,  
144, 160, 192, 224, 256, 320, VBR  
CD-ROM Format:  
If this is not done, severe damage to the source  
unit may happen.  
ISO9660 level 1, 2, Joliet or Romeo  
Folder Level Limit: No limitation  
Folder Support: 128  
File Support: 254  
Folder Name: Maximum 16 characters  
File Name: Maximum 28 characters  
22  
DB268RMP/BD269RMP/BD269RGMP  
Clarion Co., Ltd.  
All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina  
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China  
PE-2794E  
280-8302-00  
2005/12  

ASA Electronics JHD3000 User Manual
Bushnell 20 5105 User Manual
Clarion APX2181 User Manual
Clarion Car Stereo System DXZ738RMP User Manual
Cuisinart SPB 6SS User Manual
Delphi SKYFI2 DPSS 04 E 064 User Manual
Elite Screens Car Video System SPECTRUM User Manual
EverFocus EQ700 User Manual
HP (Hewlett Packard) PAVILION D5064 User Manual
JVC GET0139 001A User Manual