Cateye TOMO CC ST200 User Manual

Setting Values Cross Reference Table  
(The tire size is marked on both sides of the tire.)  
CATEYE TOMO XC  
TIRE SIZE  
20 x 1.75  
24 x 1  
24 x 3/4 Tubular  
24 x 1-1/8 Tubular  
24 x 1-1/4  
24 x 1.75  
24 x 2.00  
24 x 2.125  
26 x 1(559mm)  
26 x 1(650c)  
26 x 1.25  
26 x 1-1/8 Tubular  
26 x 1-3/8  
L(cm) TIRE SIZE  
L(cm) TIRE SIZE  
L(cm)  
211  
207  
209  
209  
210  
211  
214  
217  
216  
213  
217  
218  
222  
150  
175  
178  
179  
191  
189  
192  
196  
191  
195  
195  
197  
207  
210  
26 x 1.40  
26 x 1.50  
26 x 1.75  
26 x 1.95  
26 x 2.00  
26 x 2.1  
26 x 2.125  
26 x 2.35  
27 x 1  
27 x 1-1/8  
27 x 1-1/4  
27 x 1-3/8  
650 x 35A  
650 x 38A  
200  
199  
202  
205  
206  
207  
207  
208  
215  
216  
216  
217  
209  
212  
650 x 38B  
700 x 18C  
700 x 19C  
700 x 20C  
700 x 23C  
700 x 25C  
700 x 28C  
700 x 30C  
700 x 32C  
700C Tubular  
700 x 35C  
700 x 38C  
700 x 44C  
CYCLOCOMPUTER  
Model CC-ST200  
[with Heavy Duty Wire]  
U.S. Pat. Nos. 4636769/4642606/5236759/5226340  
and Design Patented  
26 x 1-1/2  
Copyright© 1999 CATEYE Co., Ltd.  
E
CCMSTxch1-991124 Printed in Malaysia 066600035  
SPECIFICATIONS  
3
Controller ----------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator)  
Display -------------------------------------- Liquid Crystal Display  
Sensor -------------------------------------- No Contact Magnetic Sensor  
Operating Temperature Range ------- 0°C - 40°C (32°F - 104°F)  
Applicable Cycle Sizes ------------------ 130cm - 229cm  
MOUNTING TO BIKE  
The length of the wire ------------------- 70cm  
Applicable Fork Diameter -------------- 11ø - 40ø (S:11 - 26ø L:21 - 40ø)  
Power Supply ----------------------------- Lithium Battery (CR1620 or CR1616) x 1  
Battery Life --------------------------------- Approx. 3 years(The life of the first factory-loaded battery may  
be shorter than this period.)  
Dimension/Weight ------------------------ 1-15/16" x 1-25/32" x 5/8" (49 x 45 x 16 mm) / 0.74 oz (21 g)  
* The specifications and design are subject to change without notice.  
LIMITED WARRANTY  
1-Year Warranty for Main Unit Only  
(Accessories/Attachments and Battery Consumption excluded)  
If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of  
charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully  
and remember to enclose the warranty certificate with instruction for repair. Please write or type your  
name and address clearly on the warranty certificate. Insurance, handling and transportation charges  
to our service shall be borne by person desiring service.  
1. Bracket  
2. Wire  
3. Sensor  
7. Sensor Band Rubber Pad  
8. Bracket Rubber Pad (2 pcs.)  
9. Nylon Tie (3 pcs.)  
4. Sensor Bands-A (S)(L) 10. Sensor Band Screw (S)(L)  
5. Sensor Bands-B  
6. Magnet  
(Address for service)  
11. Spiral Tube  
CO.,LTD.  
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan  
Attn.: CAT EYE Customer Service Section  
Service & Research Address for United States Consumers:  
CAT EYE Service & Research Center  
The spokes must run correctly through the  
inside the magnet as in fig.1.  
1705 14th St. 115 Boulder, CO 80302  
magnet  
Attach the sensor with Sensor Bands-A-B to  
the right fork. Choose a band that fits the fork  
diameter (S size for up to 24ø, L for  
oversize). If the front fork is thick, use the  
longer screw.  
Phone : 303-443-4595  
Fax : 303-473-0006  
Toll Free: 800-5CATEYE  
sporkes  
#169-9731  
Heavy Duty Wire and Bracket Sensor Kit  
1. Insert the band-B into the slit of the band-  
A, and put the rubber pad inside of the  
band-A(fig. 2). Adjust the length in order  
that the screw-fastening part of the bands  
are parallel when mounted to the fork(fig.  
3). *To pull out the band B from band A,  
tug strongly.  
2. Mount the adjusted bands to the fork along  
with the sensor, by temporarily tightening  
the screw(fig. 4).  
Fig.1  
sensor band B  
rubber pad  
#169-9771  
sensor band B  
Bracket Sensor Kit for Extra Large Fork  
sensor  
band A  
Fig.2  
rubber pad  
sensor band A  
sensor band A  
3. Align the magnet's center and the sensor's  
marking line(fig. 5), and make sure of  
2mm clearance between the magnet and  
sensor (fig. 6). Then tighten the screw  
securely. Cut the excess of the band-B  
with a nipper or the like.  
Secure the wire with nylon ties as shown in  
fig. 7. Wind the wire round the outer cable  
and wrap these wires with the spiral tube.  
Adjust the length of the wire. Loosen the wire  
in the area marked with the arrow so that the  
wire does not hinder handlebar operation.  
Use either 1mm- or 2 mm-thick pads if  
necessary, according to handlebar diameter.  
Attach the bracket close to the handlebar  
stem (fig. 8).  
Fig.3  
parallel  
#169-6168  
Bracket Sensor Kit for Aero Bar  
screw  
fork  
Fig.4  
sensor  
markingline  
of sensor  
#169-6167  
center of  
magnet  
Center Mount Bracket Kit  
sensor  
Fig.5  
#169-6169  
about 2mm  
Slide main unit onto the bracket from front  
until it clicks into position. To remove, pull it  
off forward while pushing down the lever. (fig.  
9)  
Stem Mount Bracket Kit  
Fig.6  
magnet  
outer cable  
•Test  
spiral tube  
Mount main unit. If main display does not show  
any figures, press either M button or S/S button  
to release from power saving function. Spin the  
wheel to check if sensor pulse symbol flashes.  
If not, adjust relative positions of magnet and  
sensor following the instructions.  
#169-9750  
#169-9751  
Attachment Kit (For Heavy Duty Wire)  
Attachment Kit (For TOMO XC)  
nyron ties  
wire  
#166-5120  
#169-6180  
Wheel Magnet  
Lithium Battery(CR1620)  
Fig.7  
lever  
bracket  
Fig.9  
Slide the main unit onto the bracket from  
front until it clicks into position. To remove  
it, pull it off forward while pushing down the  
lever. (Fig.9)  
rubber pad  
Fig.8  

Bowers Wilkins 600 Series HTM61 User Manual
Crown Boiler BWC070 User Manual
Genz Benz SHUTTLE 6 2 STL6 2 User Manual
Gitzo Series 5 Systematic GT5530S User Manual
Hamilton Beach 1G901 User Manual
Hamilton Beach Blender Hamilton Beach Single Serve Blender User Manual
Hyundai H CDM8059 User Manual
JVC AA V40EG User Manual
JVC Everio GZ MG750U User Manual
JVC GET0598 002B User Manual