6. Select the add-in that you want to install.
• If you are installing an add-in from the CD-ROM (Physium, Geometry, etc.), navigate to the
CD-ROM that is in your computer’s CD-ROM drive and then select the add-in.
7. Click [Open].
• This should cause the imported add-in file to appear in the Computer window.
* If the “Memory Full Error” occurs, delete files in the Computer window that you no longer
need. Next, right-click “Default” and then select “Optimization” from the shortcut menu that
appears. After that, restart the procedure from step 3.
8 . On the calculator, enter the LINK Mode, and configure the
following settings: Cable Type: USB; Wakeup: On;
Capture: Memory.
9. Use the USB cable to connect the calculator to your computer and then click the
icon.
• This will establish a connection between the calculator and FA-124 PROGRAM-LINK, and
display the contents of calculator memory in the fx-9860 window.
E-2
10. In the Computer window, right-click the add-in application you want to install and then click
“Copy” on the shortcut menu that appears.
11. In the fx-9860 window, right-click the user name and then select “Paste” on the shortcut menu
that appears.
* In place of steps 10 and 11, you could also drag the add-in application from the Computer
window and drop it onto the user name in the fx-9860 window.
E-3
12. The data will be copied from the Computer window to the fx-9860 window.
13. After the copy operation is complete, the add-in application will appear under the user name in
the fx-9860 window.
14. Click the
icon.
• This will terminate the connection between the calculator and
FA-124 PROGRAM-LINK and cause the message “Complete!”
to appear on the calculator display.
15. On the calculator, press the J key and then the m key.
• Confirm that the add-in application’s icon is on the Main Menu.
E-4
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
SA0701-B
|