Thank You for purchasing the
SD-100U
CAR DVD/CD PLAYER
USER MANUAL
V1.2
Bravo View Technology
20153 Paseo Del Prado
Walnut, CA 91789
United States of America
909-869-0699
THANK YOU FOR YOUR PURCHASE!
PLEASE TAKE A MOMENT TO GET FAMILIAR WITH THE PACKAGE CONTENTS
Car DVD/CD Player
3ft A/V Cable
Wire Harness
Infrared Remote
Sensor
Mounting
Brackets
Remote
Control
PRODUCT SPECIFICATIONS
DVD±R / DVD± RW / CD-R/RW
DISC TYPE
MP3 / MP4 / HDCD / WMA / JPEG /
VCD / SVCD / DIVX / CPRM
DIC FORMATS
NTSC OR PAL Format
85 dB
TV SYSTEM
S/N RATIO
DYNAMIC RANGE
AUDIO OUTPUT
VIDEO OUTPUT
POWER
80 dB
1 Composite Audio L+R (RCA)
2 Composite Video (RCA)
DC 12V Consumption 10 Watts
-20°C 80°C
OPERATING TEMPERATURE
UNIT WEIGHT
4.0 lbs ( 1.2kg)
IMPORTANT INFORMATION
Before operating/installing your Car DVD Player, please read these instructions carefully.
1. To ensure the safety of this product during transportation, the internal
mechanism was fixed with security screws. Please remove these screws
before use.
2. To prevent any damage to the internal components of this product, the
mounting screws must be less than 5MM when attaching the mounting
brackets.
3. Do not remove the Serial Number Label on this unit.
4. Install the unit in a dry location and avoid any area where build-up of
condensation is possible.
5. Do not try to load more than 1 DISC at a time. Doing so will jam the
internal mechanism and prevent the unit from functioning.
6. If the unit overheats, or malfunctions, turn off the power. After the unit
has had adequate time to cool down, turn it on again. If the problem
persists, contact the dealer you purchased the unit from.
7. Keep this owners manual for future reference
INTRODUCTION
The Bravo View SD-100U is a full-featured Car DVD/CD Player designed specifically
for the mobile environment. It’s intended for use with other multimedia products
such as roof-mount and headrest LCD screens as well many other mobile video
solutions. SD-100U is equipped with one 3.5mm Audio/Video input. This AUX input
allows the connection optional Audio/Video components such as a camcorder, video
game system, or a portable media player. This DVD Player incorporates several
video output settings to allow the best possible viewing experience, regardless of
what type of video monitor you may be using.
The SD-100U plays DVD discs in NTSC or PAL formats (NTSC is the standard North
American video format), CD-Audio discs, and CD-recordable discs with MP3 files. For
more details on disc types supported, please see “Product Specifications” in the
front page of this manual.
The remote control (included) provides access to the full set of standard DVD
functions, such as subtitle control, digital freeze-frame viewing, viewing from
multiple camera angles, selection of various language audio soundtracks, and digital
playback at fast or slow speeds. The SD-100U remote also supports direct access to
specific DVD chapters or CD tracks.
CARE AND MAINTENANCE
Handling and Cleaning DVD’s and CD’s
Avoid leaving fingerprints on the discs when handling it; always handle a
disc by its edges.
Always store discs in their protective cases.
Always ensure that discs are clean and dry before inserting.
Protect discs from heat and direct sunlight. Dirt, dust, scratches and
warped discs will cause unit malfunction.
DO NOT PUT LABELS ON DISCS
Disc Cleaning
Use a dry soft cloth to wipe the surface of a disc. If a disc is especially dirty use a soft
cloth slightly moistened with ribbing alcohol. Never use solvents such as benzine, or
conventional record cleaners as they may damage the surface of the disc.
Disc Cleaning
REMOTE CONTROL
1. POWER
Press POWER to turn the unit ON or OFF.
2. AUX IN
Switches to 3.5mm AUX input
3. SETUP
For DVD setup, please refer to the “SYSTEM
SETTINGS” section.
4. I
Skip to previous chapter or track.
5. SUBTITLE
Changes the SUBTITLE language on a multi-
subtitle language DVD disc.
6.
In the MENU mode this button serves as a
cursor button to select left.
7. MENU
While playing DVD, push this button to
display the option menu included in the disc
(whether it works depends on the type of
disc).
8.
Rapid Reverse, each time button is pressed,
the speed of rapid reverse changes according
to the disc as follows.
9. LANGUAGE
Multi-language selectable.
10. L/R
Multi-language selectable.
11. SLOW
Slow motion
12. REPEAT
Repeat the selected chapter or title.
13. NUMBER BUTTONS (0-9) number buttons are used to enter number of CD track
or DVD chapter.
14. 10+When you select tracks/chapters over 10, Press 1 time, and then press the next
digits. When you select tracks/chapters over 20, press 2 times, then press the next
digits, for example "13”, press this key, then press "3".
15. EJECT
Press this button; the disc will be unloaded from
the player and press it again the disc will be loaded.
REMOTE CONTROL
16. OSD
Playing time and track information is displaye
on the front display.
17. I
While playing push this button to skip to next
chapter or track.
18.
In the MENU mode this button serves as a
cursor button to select up.
19.
In the MENU mode this button serves as a
cursor button to select right.
20. ENTER
Press this button to execute the entered
number or the selected item.
21.
Search the disc forward.
22.
In the MENU mode this button serves as a
cursor button to select down
23.
Play or Pause current content.
24. STOP
While playing, press this button once to pause playing, and then press
resume playing. But if you press twice, the playing will be stopped completely.
25. STEP
Frame-by-Frame play.
26. USB/SD
Press this button to select USB or SD mode
27. ZOOM
Allows the picture to be increased in size.
28. P/N
No function
29. VOL+
Volume Up.
30. VOL-
Volume Down.
31. MUTE
Audio is temporarily interrupted.
to
FRONT PANEL DESCRIPTION
1. Eject
2. Enter
8. Down (VOL-)
9. Right (Next)
10. Infrared Sensor
11. VFD Display
12. USB/SD Switch
13. USB Port
3. Up (VOL+)
4. Disc Slot
5. Play/Pause
6. Power On / Off
7. Left Button
(Previous)
14. SD Card Slot
REAR PANEL DESCRIPTION
OPTIONAL
UNIVERSAL LCD MONITOR
NOTE:
For Wireless Headphones to
work properly, the White &
Red RCA output must be
connected to your
System’s audio inputs.
BASIC OPERATION
Power On/Off and Playback
1). Press power button on remote control or on the front panel of the player.
2). Insert the disc into the disc slot, with label side facing upward.
3). The player will accept the disc automatically, and begin to read it; it can identify
different disc formats then display it on the TV screen. If directory or menu
picture display in the screen, you can press the direction buttons , , and
buttons in the remote control to move lighting band to desired title and press
[ENTER] button to select it, also you can directly press number buttons to select
track.
Select item through Menu
If the DVD disc has menu, you can display the menu by pressing MENU button,
then you can select a popular item to play according to following procedures.
1). Press MENU
The screen display menu picture, the content to be selected varies with different
discs.
2). Press the directory buttons ,, or to select the desired item.
3). Press ENTER to confirm the selected item.
BASIC OPERATION
Forward/Reverse
When you press FWD/REV under the Play mode, the unit will start to
forward/reverse. You can play discs at various speeds. With each consecutive press
of FWD/REV, the playback speed changes. There are 4 speed levels for DVD discs in
FWD/REV: X2, X4, X6, X8. There are 4 speed levels for disc types other than DVD
disc: X2, X4, X8, X16.Press PLAY to resume the normal playback.
Track Selection
There are more than one operation procedures available
A. Press I or I to skip to the next or the previous track and play.
B. For those discs with track number, directly Press number buttons to enter the No.
of the desired track If the screen displays “Φ” there may be three possible reasons:
(1) the track in the disc is not numbered; (2) the number entered is beyond the
scope; (3) the disc has no number select function.
C. Select among the song track list (such mp3 etc. menu list)
Select Subtitle Language
For DVD discs, you can Press SUBTITLE to switch the subtitle language. Keep
pressing it, and the screen will display available languages alternatively.
Select Audio Channel
For DVD discs, you can press LANGUAGE to switch the audio channel. And for other
discs, press L/R button to switch L/R channel.
OSD
Press OSD button, TV screen will display current playing time and state, i.e. playing
time and remaining time, playing chapter/track information, press OSD each time,
the screen will show a time alternatively.
SYSTEM SETTINGS
System Setup Menu
You can press Setup key on the remote control to bring up the System Setup Menu
when the unit is under the stop/playback mode.
Language Set
Press up /down / Left / Right direction button to select an item, and then press
ENTER.
OSD Language
OSD menu set allow user to choose language for OSD menu and information display
set option (as picture)
SYSTEM SETTINGS
Subtitle
User can set subtitle language (DVD disc) option
Note: Some disc can use subtitle display different from menu set.
Audio
User can set initials dub language by dub language set (DVD disc). Option
Note: Some DVD disc dub language will be different from set dub language.
DVD Menu
User can set DVD menu language (DVD disc) item select as.
Note: Some DVD menu use as different language display.
Video Set
Press up /down / Left / Right direction button to select an item, and then press
ENTER.
Aspect Ratio
16:9 (Widescreen): Choose this setting if your DVD player is connected to a
widescreen monitor. (Use this mode for Bravo OVR-121WFM and OVR-154BL)
4:3 (Letter Box): Choosing this setting if your DVD player is connected to a
normal ratio monitor.
SYSTEM SETTINGS
View Mode
The user can choose 4 display modes.
Fill: the picture will be stretched over entire screen.
Original：the picture will be in its original format
Auto Fit：the picture can automatically adapt to the screen format
Pan Scan: The picture ratio is not changed, it makes picture stretch to whole screen
from up and down or left and right
TV System
According to the Color System of the TV, you can choose the TV System.
AUTO: Choose this settings if your DVD player is connected to a multi-system TV.
NTSC: Choose this settings if your DVD player is connected to a NTSC TV.
PAL: Choose this settings if your DVD player is connected to a PAL TV.
The default setting is NTSC.
SYSTEM SETTINGS
Rating Set
Press up / down/ Left / Right direction button to select an item, than press ENTER.
Set Password
The password option is initialized locked, and you cannot set the ratings limit or
change the password. In order for the Ratings feature work, the password mode
must be turned on. If you want to set the ratings limit, you will need to enter the
default password, which is 8888, then press Enter to confirm. To change the
password, you will be prompted for the old password, than prompted for a new
password. Enter a 4-digit number (this is your password).
Note: the password is a 4-digit number (default is 8888).
The Rating feature is a rating limit system, like movie ratings. It works with DVD
discs that have been assigned a rating. This helps you control the types of DVD’s
that your family watches.
There are two rating options: “NO ADULT” and “KID SAFE”.
Select the “VIEW ALL” option to cancel the rating limit.
The default setting is “VIEW ALL”.
SYSTEM SETTINGS
Misc set
Press up /down / Left / Right direction button to select an item, and then press
ENTER.
Use Default settings:
Choose this option to resume all the setup options to default settings.
Auto play DVD:
The DVD will skip the title menu and directly play the contents.
Memory play:
The user may choose power cut when playing DVD whether need memory last
playing place.
USB/SD CARD OPERATION
When there’s no disc, insert the USB Storage Device into the USB/SD slot. The player
will auto search the directories for saved MP3 / JPEG files. Also you can use the
USB/SD button on remote controller to switch between the USB and DISC.
Note: The USB/SD port function is only valid for flash memory USB/SD devices.
(Supported formats: MP-3, WMA, MP-4 and JPEG)
INSTALLATION
PROFESSIONAL INSTALLATION RECOMMENDED!
5. DC 12V/24V
3. Remote IR
Sensor Input
1. Wire Harness
2. AUX 3.5mm
Audio/Video Input
4. Audio/Video
Outputs
1. Wire Harness
(a) +12V switched lead (red)
Connect the red lead to a suitable +12V circuit switched through the ignition
(b) Battery negative lead (black)
Connect the black lead to a suitable ground (vehicle chassis).
Keep the ground wire as short as possible. Longer ground wires can lead to
engine noise through the speakers. Ground wires should be no longer than
30” in length.
Note: there is no constant wire lead in this system. This DVD player uses
internal flash memory to remember its last position memory.
2. AUX 3.5mm Audio/Video Input
This input can be used with a wide variety of audio/video components. Most
standard 3.5mm plugs can be used with this input.
INSTALLATION
PROFESSIONAL INSTALLATION RECOMMENDED!
3. Remote IR Sensor Input
Plug the supplied the remote sensor jack directly. The IR sensor should be
placed in a direct line of sight in the vehicle. This will allow the remote to
control the DVD player remotely.
4. Audio/Video Outputs
This system features 2 RCA video outputs / 1 audio (L+R) output.
Watch VIDEO and Listen to AUDIO with Wireless Headphones
(a) Connect the video output to the monitor’s video input.
(b) Connect the audio output (L+R) to your universal LCD monitor’s audio
inputs. This connection will supply audio to the built-in IR transmitter so that
you may use wireless headphones.
Listen to AUDIO through your vehicle’s speaker system using an
FM Modulator or FM Transmitter.
(a) Add 2 Y-adapters (1 male-to-2 female) to the audio outputs of this unit.
(b) Connect the audio output (L+R) to your FM Modulator or FM
Transmitter’s audio inputs. This connection will supply audio to the FM
Modulator or FM Transmitter so that you may hear audio. For further
information, see the FM Modulator or FM Transmitter’s installation
manual.
(c) If your car stereo has an AUX input, an FM Modulator or FM Transmitter
is not necessary. Simply run your audio cables (L+R) into the AUX input
of your car stereo. This input may be on the front or rear of your car
stereo.
5. DC 12V/24V Power Input
This outlet can be used with a DC 12V/24V power adapter for home or
vehicle use.
Note: The FM Transmitter, FM Modulator, Wireless Headphones and Y-adapters are
all sold separately. See your retailer for more information on how these accessories
can make your mobile video system more entertaining.
Limited Warranty
Bravo View Technology warrants this product (including any accessory and/or cable) against
defects in material or workmanship as follows:
1.
2.
Labor. For a period of 1 Year from original date of purchase, if the product is determined to be
defective, Bravo View will repair or replace the product at no charge.
Parts. For a period of 1 Year from original date of purchase, Bravo View will at no charge, replace
with new or rebuilt parts in exchange for defective parts. The warranty will either continue from
date of original purchase or 90 days from repair (Whichever is longer).
This warranty does not cover customer misuse, improper installation, poor signal (including any “noise”),
cosmetic damage, damage due by accident, abuse, negligence, commercial use, and improper operation.
Proof of Purchase in the form of a copy of a bill of sale or copy of receipted invoice, which shows clearly
the sale of the unit, is required.
Repair or Replacement as provided under this warranty is the exclusive remedy of the consumer. Bravo
View Technology shall not be liable for any incidental or consequential damage for breach of any express
or implied warranty on this product. In no event shall Bravo View Technology be liable for any incidental
or consequential damage whatsoever arising out of the use or inability to use the product. Under no
circumstance shall Bravo View Technology’s liability exceed the purchase price paid for the product.
Except to the extent prohibited by applicable law, any implied warranty or merchantability or fitness for a
particular purpose on this product is limited in duration to the duration of this warranty.
PROCESS:
1.
Contact Bravo View and describe the problem with the unit. Please have your model number,
date of purchase and where it was purchased ready. If requesting on-line, please include your
name, address and telephone number.
2.
3.
If determined that the item is warrantable, Bravo View will issue a RA# and provide an address
to mail the unit back to.
Bravo View is not responsible for articles lost or stolen during shipping. IT IS ADVISABLE TO
SHIP THE UNIT IN A METHOD IN WHICH YOU CAN TRACK THE PACKAGE, AND POSSIBLY
INSURE THE PACKAGE. Bravo View does not cover the expense of mailing the unit back to us.
Once Bravo View receives and validates the unit to ensure it is within warranty, Bravo View
will replace the unit, fix the unit, or offer a substitute of the unit if a replacement is not
available. Bravo View may send a refurbished unit back.
Bravo View will mail the unit back to you. To obtain warranty service, you must contact Bravo
View Technologies for a Return Authorization Number (RA#). 866-40-BRAVO or visit
4.
5.
|