Models
FP200HC
FP200HS
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid to:
STICK BLENDER
U.S.:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY, 12901
Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC, H4S 1A7
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
OWNER’S MANUAL
Models: FP200HC-FP200HS
120V., 60Hz., 350 Watts
will repair or replace it free of charge. Proof of purchase date must be included. *
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover normal wear of parts and
does not apply to any unit that has been tampered with or used for commercial purposes. This
limited warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This warranty does not cover damage
or defects caused by or resulting from damages from shipping or repairs, service or alterations to
the product or any of its parts, which have been performed by a repair person not authorized by
EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event
is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accompanying instructions. RETURN TO:
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY, 12901
Model FP200HC-FP200HS
_____________________________________________________________________
Appliance model
_____________________________________________________________________
Date purchased
Name of store
_____________________________________________________________________
Owner’s name
USA: EURO-PRO OPERATING LLC
94 Main Mill Street, Door 16
Plattsburg, NY 12901
Canada: EURO-PRO OPERATING LLC
4400 Bois Franc
_____________________________________________________________________
St. Laurent, QC H4S 1A7
Address
City
Prov.
Postal code
Tel.: 1 (800) 798-7398
Copyright © EURO-PRO Operating LLC 2006
Printed in China
7
Operating Instructions
Getting to Know Your Stick Blender
•
•
Do not operate continuously for
more than 1 minute.
Dough Hooks (x2):
For use with light dough ONLY.
If pieces of unprocessed food
remain, or if there are any lumps,
continue pureeing the food,
however, mash the food pieces or
lumps by slightly raising and then
lowering the stick blender over
those pieces.
• Insert stem end of dough hooks (one
at a time) into opening in base of
gear box.
• Rotate slightly while pressing gently
until dough hook “clicks” into place.
• Repeat for second dough hook.
• Ensure that dough hooks are well
seated in mixer gear box.
Multi-Mixer Assembly
CAUTION: Ensure that the
appliance is unplugged from the
electrical power source before
changing attachments. Do not
immerse the mixer gear box in water.
Wire Beaters (2):
Follow same installation procedure as
above.
1. To attach the mixer gear box to the
power pack, line up arrow on the
power pack and mixer gear box.
Wire Whisk:
This attachment is used for beating air
into mixtures such as egg whites, yolks
or creams.
2. Push power pack onto mixer gear
box until seated.
• To install, place stem of wire whisk
into either of the openings in the
mixer gear box.
3. While grasping mixer gear box
rotate it 90º clockwise until the
arrow on the power pack aligns with
the “Square” on the mixer gear box.
• Rotate wire whisk while pushing
gently until wire whisk “clicks” into
place.
4. To disassemble mixer gear box and
power pack rotate mixer gear box
90º counterclockwise.
• Ensure that wire whisk is well seated
in gear box.
Attaching the Attachments to the
Gear Box
CAUTION: Ensure that the
appliance is unplugged from the
electrical power source before
changing attachments. Do not
immerse the gear box in water.
1. 350 Watt Power Pack
2. On/Off Switch
3. Variable Speed Control
4. Gear Box
5. Dough Hooks (x2)
6. Stick Blender
8. Wire Whisk
9. Glass Beaker
10. Wall Bracket
11. Wall mounting hardware
(not illustrated)
Select the desired attachment, either
the dough hooks, wire beaters or
whisk and assemble to gear box as
noted below:
1. After attaching the desired
accessory into the gear box, plug
the mixer into power source.
7. Wire Beaters (x2)
Note: When inserting dough hooks or
beater attachments, make sure to
insert the piece with the ring on the
shaft into the larger opening of the gear
box.
2. Hold the power pack with one hand
and press and hold the On/Off
switch with your index finger.
* Illustrations may differ from actual product.
3. Ensure that there are no
obstructions and that the
accessories are moving freely in the
mixing container.
Technical Specifications
4. When finished using the unit,
unplug the unit before removing the
accessories.
Voltage:
Power:
120V., 60Hz.
350 Watts
5
2
Operating Instructions
Operating Instructions
The STICK BLENDER is an
4. Place the metal stick blender first
Stick Blender Attachment
Assembling the Stick Blender:
indispensable kitchen tool for blending,
chopping, mixing or pureeing when
preparing your favorite recipes. The
interchangeable accessories and
attachments that come with your unit
are powered by a high efficiency 350
watt power pack. For best results, be
sure to carefully read all the
into the food to be chopped or
pureed before pressing the On/Off
Switch to avoid spattering.
Make sure that the unit is unplugged
from power source before attaching
or removing any of the stick blender
attachments.
CAUTION: Blade is sharp. Detach
stick blender from power pack and
wash with warm soapy water. Do not
use any sharp pointed objects to clean
residues from under the blade.
5. Use the variable speed control knob
to select the desired speed.
WARNING: This appliance is
designed for intermittent use.
Maximum running time with the stick
blender is 1 minute. After this time,
allow the unit to cool.
6. Always release the On/Off switch
before removing the stick blender
from the food especially when using
the stick blender in hot liquids.
Always hold the unit with your hand
while processing. Never leave the
unit unattended or hook it on the
wall bracket when it is plugged in.
7. To remove the stick blender
attachment from the power pack,
first unplug the unit from the power
source and turn only the stick
Wall Bracket
A wall bracket is provided with your
stick blender. Install the wall bracket in
any convenient location using the wall
anchors and screws (included). The
Power Pack with or without the Stick
Blender attachment may then be
conveniently stored out of the way.
(Fig. 1)
instructions contained in this book
before using this appliance.
1. Line up arrow of stick blender
attachment with arrow on power
pack. Once fully inserted, rotate stick
blender attachment clockwise 90º
until arrow on power pack aligns with
square on stick blender. (Fig. 2)
350 Watt Power Pack
The 350 Watt Power Pack operates on
120V., 60Hz. electrical power. Never
allow the power pack to become wet
when plugged into an electrical outlet.
IMPORTANT: Install wall mount
bracket high enough above
countertop to allow for clearance of
power pack with stick blender
attached.
WARNING: The power pack should
never be immersed in water.
blender attachment 90° counter-
clockwise and pull it off.
CAUTION: Make sure that the
power pack is unplugged from
power source before attaching or
removing any accessory.
Using the Stick Blender
Pureeing soups, sauces, fruits and
vegetables:
To use the power pack with any of the
Stick Blender accessories, place it on
the attachment shaft aligning the
arrows on the power pack and
accessories to be used and turn it
counterclockwise 90º until the arrow on
the power pack aligns with the square.
To remove the power pack, turn it
clockwise.
•
•
•
•
•
•
•
Fruits and vegetables should be
peeled, cored and seeded.
Meats, poultry, and fish should have
skin and bones removed.
Fig. 2
Food should be cut up into pieces
no larger than 3/4-inch.
2. Plug the cord into an electrical
outlet.
Cook the food in liquid until very soft
and tender.
CAUTION: To avoid splattering,
place the stick blender first in the
food to be beaten or chopped, then
press the button. Always release the
button before removing the stick
blender from the food, especially
when using the stick blender in hot
liquids. Always hold the stick
blender with your hand while
processing. Never leave unit
unattended.
To operate the power pack, press on
the switch button located on the top of
the unit. The power pack will stop
operating when you remove your finger
from the switch button.
Fig. 1
Puree cooked food ONLY after
allowing to cool down.
Food can also be pureed directly in
the pot after being allowed to cool.
Place the Stick Blender in the
center of the food in an upright
position with the processor end
resting directly on the bottom of the
bowl or pot.
Variable Speed Control
There is a variable speed control
located at the top of the power pack.
To vary the speed of your blender
rotate the round knob at the top of the
power pack. From the low setting turn
the variable speed control clockwise to
increase speed and counterclockwise
to reduce speed.
•
The processor end must always be
immersed in the food. DO NOT lift
up and out of food while
operating since the hot food will
splatter and could cause burns.
CAUTION: Do not use the Stick
Blender on the stove. If you want to
use it in a saucepan while cooking,
you must first remove saucepan
from the stove.
•
•
While holding the power pack and
the stick blender in your hand, press
and hold down on the switch with
your index finger.
3. Use the beaker with the stick
blender or you can use another
container. The beaker is intended
only for processing small quantities
of food with the stick blender.
Release once the food has reached
the desired consistency.
3
4
|