MR 4050 CA
MR 4000 CA
450
Watt
Type 4162
1
4
7
2
3
a
5
8
6
b
c
2
1
click!
9
d
max.
300 g
200 g
150 g
+/-
20-30 sec
20-30 sec
8 x 1 sec
1cm
1cm
20 g
20
20 sec
15 sec
150 g
300 g
300 g
10 sec
20 sec
30 sec
3
4
5
How to operate your chopper
attachment
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you thoroughly enjoy your new Braun
appliance.
(a) Chopper gear box
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid
Caution
The chopper is perfectly suited for chopping
meat, cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds etc.
When chopping hard goods (e.g. hard cheese)
use the on/off switch #.
•
Please read the use instructions carefully and
completely before using the appliance.
The blades are very sharp!
Always unplug the appliance when it is left
unattended and before assembling, disas-
sembling, cleaning and storing.
•
•
N.B.: Do not chop extremely hard food, such as
ice cubes, nutmeg, coffee beans or grains.
•
•
The appliance must be kept out of reach of
children.
Do not hold the motor part !nor the whisk
gear box Áunder running water, nor immerse
them in water.
Before chopping ...
–
pre-cut meat, cheese, onions, garlic, carrots
(see processing guide on page 5),
•
Braun electric appliances meet applicable
safety standards. Repairs or the replacement
of the mains cord must only be done by
authorised service personnel. Faulty, unquali-
fied repair work may cause considerable
hazards to the user.
–
–
remove stems from herbs, shell nuts,
remove bones, tendons and gristle from meet.
1. Caution: Carefully remove the plastic cover
from the blade (b). The blade is very sharp!
Always hold it by the upper plastic part. Place
the blade on the centre pin of the chopper
bowl (c). Press it down until it locks into place.
Always place the chopper bowl on the anti-
slip base (d).
2. Place the food in the chopper bowl.
3. Put the gear box (a) on the chopper bowl.
4. Insert the motor part !into the gear box (a)
until it locks into place.
•
Before plugging into a socket, check whether
your voltage corresponds to the voltage
indicated on the appliance.
•
•
The appliance is constructed to process
normal household quantities.
Neither the beaker &, nor the chopper bowl
(c) is microwave-proof.
5. Press switch ‚or #to operate the chopper.
During processing, hold the motor part with
one hand and the chopper bowl with the other.
6. After use, turn the motor part !to remove it
from the gear box.
7. Then remove the gear box.
8. Carefully take out the blade.
9. Remove the processed food from the
chopper bowl. The anti-slip base also serves
as a lid for the chopper bowl.
Description
! Motor part
‚ On/off switch (speed 1)
# On/off switch (speed 2)
$ Blender shaft
% Measuring beaker
& Whisk gear box
Á Whisk
( Chopper («CA»)
Cleaning
How to operate your handblender
Clean the motor part !and the whisk gear box
&with a damp cloth only. The chopper gear box
(a) may be rinsed under the tap. However, do not
immerse it in water.
All other parts can be cleaned in the dishwasher.
However, after processing very salty food, you
should rinse the blades right away. Also, be
careful not to use an overdose of cleaner or
decalcifier in your dishwasher.
The handblender is perfectly suited for preparing
dips, sauces, soups, mayonnaise and baby food
as well as for mixing drinks and milk shakes.
1. Insert the motor part !into the blender shaft
$until it locks into place.
2. Position the handblender deep in the bowl,
then press switch ‚or #.
3. After use, turn the blender shaft to remove it
from the motor part.
When processing foods with colour (e.g. carrots),
the plastic parts of the appliance may become
discoloured. Wipe these parts with vegetable oil
before placing them in the dishwasher.
You can operate the handblender in the
measuring beaker, or in any other container.
When blending directly in the saucepan while
cooking, remove the pan from the stove first to
protect your handblender from overheating.
Accessories
(available at Braun Service Centres; however, not
in every country)
HC-4000: High-speed chopper, ideal for herbs,
onions, garlic, chilis, nuts etc.
How to operate your whisk
Use the whisk only for whipping cream, beating
egg whites and mixing sponges and ready-mix
desserts.
1. Insert the whisk Áinto the whisk gear box &,
then insert the motor part !into the gear box
until it locks into place.
Recipe examples
Mayonnaise (use blender shaft)
200-250 ml oil,
2. Place the whisk deep in a bowl and only then,
press switch ‚(speed 1) to operate it.
3. After use, first turn the whisk gear box to
remove it from the motor part. Then pull the
whisk out of the gear box.
1 egg (yolk and white),
1 tbsp. lemon juice or vinegar, salt and pepper
to taste
Put all ingredients into the beaker according to
the a.m. order. Introduce the handblender to the
base of the beaker. Pressing switch #, keep
the handblender in this position until the oil
emulsifies. Then, without switching off, slowly
move it up and down until the mayonnaise is well
combined.
For best results:
•
•
Do not use the beaker %, but a wider bowl.
Only use switch ‚(speed 1) to operate the
whisk.
•
•
•
Move the whisk clockwise holding it slightly
inclined.
Only whip up to 400 ml chilled cream
(min. 30 % fat content, 4-8 °C).
Only whip up to 4 egg whites.
Avocado dip (use chopper)
Chop 1 clove garlic,
add 2 ripe avocados (quartered, without stone),
1 tbsp. lemon juice
1 tbsp. olive oil
150 ml yoghurt
1 tsp. sugar, salt and pepper. Using switch #,
blend for about 1 minute.
6
Subject to change without notice.
This product conforms to the European
Directives EMC 2004/108/EC and Low
Voltage 2006/95/EC.
Internet:
4-162-368/01/XI-07
China/GB
7
|