Bosch Appliances Camcorder LTC 0435 User Manual

LTC 0435 & LTC 0455  
Installation Manual  
Installatiehandleiding  
Digital Color Cameras  
Digitale Kleurencamera  
EN  
FR  
DE  
ES  
NL  
IT  
Manuel d’installation  
Caméra Numérique  
Couleur  
Manuale d’installazione  
Videocamera Digitale a Colori  
Installationsanleitung  
Manual de Instruções  
Digitale Farbkamera  
Câmara Digital Colorida  
PT  
ZH  
Manual de instalación  
Cámara Digitale de Color  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 2  
7. Do not defeat the purpose of a polarized or grounded mains plug.  
A polarized plug has dissimilar prongs (one wider than the other)  
to ensure correct polarity, while a grounded plug has an  
additional 'ground' prong provided for your safety. If the plug  
supplied with the apparatus does not fit into your outlet, consult  
an electrician for advice.  
8. Protect the power-supply cord from being walked on or pinched,  
particularly close to plugs, receptacles and the point where it exits  
from the apparatus.  
9. Only use attachments and accessories (including stands, tripods,  
mounting brackets and housings) specified or recommended by  
the manufacturer.  
10. Unplug the apparatus during lightning storms and when unused  
for extended periods.  
11. Do not attempt to service this unit yourself as opening or  
removing covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
12. Servicing is required when the apparatus does not function in the  
normal way, has been dropped, if liquid has been spilled on it, or  
if it has been exposed to rain or water. Unplug the unit from the  
outlet and refer servicing to qualified service personnel.  
13. An all-pole mains switch with contact separation of at least 3 mm  
in each pole shall be incorporated in the electrical installation of  
the building.  
EN  
WARNING  
To reduce the risk of fire or electric shock, do not expose  
this apparatus to rain or moisture.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 3  
FCC INFORMATION  
CAUTION  
Any changes or modifications to construction of this  
device that are not expressly approved by the party  
responsible for compliance could void the userfs authority  
to operate the equipment.  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
Re-orient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for  
help.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 4  
SPECIFICATIONS  
LTC 0435/x0  
LTC 0455/x1  
Standard resolution  
High resolution  
Standard  
PAL  
NTSC  
PAL  
752 x 582  
NTSC  
768 x 494  
Active pixels (H x V)  
Imager  
512 x 582  
512 x 492  
1/3" interline CCD  
330 TV lines 540 TV lines  
Resolution  
Minimum illumination  
<0.39 lux  
NA  
<0.65 lux  
<0.26 lux with Nightsense™  
Signal-to-noise ratio  
Video output  
> 50 dB  
1 Vpp, 75  
Y/C output  
Y: 1 Vpp, 75 Ω  
C: 0.3 Vpp 75 Ω  
Synchronization  
Shutter  
Internal or Line-Lock (selectable)  
Auto / Flickerless / Off (selectable)  
PAL: 1/50 - 1/125000 - NTSC: 1/60 - 1/150000  
Nightsense™  
NA  
Auto / Forced / Off  
(selectable)  
Autoblack  
AGC  
On / Off (selectable)  
On (0-21 dB)/ Off (0 dB) (selectable)  
On / Off (selectable)  
BLC  
ATW  
Auto 2500 to 9000 K (with 'Hold' mode)  
C and CS compatible  
Lens mount  
ALC  
Video-iris or DC-iris (auto detect)  
Power supply  
LTC 04x5/1x & /2x: 12 to 28 VAC or 11 to 36 VDC  
LTC 04x5/5x & /6x:  
<4 W  
to 2 VAC  
Power consumption  
Dimensions (HxWxL)  
Weight  
58 x 66 x 122 mm (2.28 x 2.6 x 4.8 inch without lens)  
450 g (0.99 lbs) (without lens)  
Camera mount  
Two 1/4" 20 UNC - isolated (bottom) and non-isolated  
(top)  
Operating temperature  
Controls  
-20ºC to +50ºC (-4ºF to +122ºF)  
On-screen display (OSD) with softkey controls  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 5  
Type number overview  
Low voltage  
High voltage  
PAL (Europe) NTSC (USA) PAL (Europe) NTSC (USA)  
LTC 0435/10 LTC 0435/20 LTC 0435/50 LTC 0435/60  
LTC 0455/11 LTC 0455/21 LTC 0455/51 LTC 0455/61  
Standard resolution  
High resolution  
UNPACKING  
Unpack carefully and handle the equipment with care. The  
packaging contains:  
Camera  
CCD protection cap  
Spare lens connector (male)  
These Instructions  
Note:  
If equipment appears to have been damaged during shipment, repack  
it in the original packaging and notify the shipping agent or supplier.  
CONNECTION  
Power  
LTC 04x5/1x and /2x  
LTC 04x5/5x and /6x  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 6  
To open the quick-connect, push in on the tabs. Connections are not  
polarity sensitive Use stranded or solid wire AWG16 to AWG22, cut  
back 10mm (0.4") of insulation.  
Composite Video  
Y/C output (LTC 0455/x1 only)  
Pin Y/C Socket  
1
2
3
4
GND Y  
GND C  
Y
C
LENS MOUNTING  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 7  
Pin  
1
Video iris lens  
DC iris lens  
Damp-  
Supply (11 V, 50 mA max.)  
Not used  
2
Damp+  
Drive+  
3
Video signal 1 Vpp, 1 kΩ  
Ground  
4
Drive-  
Video-iris and DC-iris lenses are recommended for the best  
picture performance.  
The camera automatically detects the type of lens used, and  
optimizes performance accordingly.  
A spare male lens connector is provided if required.  
CAUTION  
To avoid damaging the CCD sensor when using a C-  
mount lens, turn the 'green' back-focus ring counter  
clockwise until it stops ('Back focus adjustment')  
before mounting the lens.  
Lenses weighing more than 0.5 kg (1.1lbs) must be  
separately supported.  
Note:  
If a short circuit is detected on the lens connector, the on-screen  
display (OSD) failure message 'LENS SHORT CIRCUIT' is shown.  
The lens circuit is automatically disabled to avoid internal damage.  
Remove the lens connector and check the pin connections.  
Back focus adjustment  
Camera accepts both C and CS-  
mount lenses.  
1. Unlock the back focus locking  
button.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 8  
2. Turn the back focus adjustment as required. (See Note 1).  
3. Lock the back focus locking button.  
Notes:  
1. To optimize picture sharpness in  
both bright and low-level lighting, it  
is recommended to adjust the back  
focus when carrying out the set-up  
procedure. The camera's unique  
'Lens Wizard' allows focusing at  
maximum lens opening to ensure that the object of interest  
always remains in focus.  
2. When back focusing vari-focus lenses, it must be possible to  
obtain a sharp picture in both wide-angle and tele positions, and  
for both far and near focus.  
3. When back focusing zoom lenses, ensure the object of interest  
remains in focus throughout the entire zoom range of the lens.  
(See Advanced Set up).  
CAUTION  
Do not point the camera/lens into direct sunlight. When  
viewing an outdoor scene, a video- or DC-iris lens is  
recommended.  
MOUNTING THE CAMERA  
The camera can be mounted from  
the top or bottom.  
Note:  
The BOTTOM mounting is  
isolated from ground.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 9  
ADVANCED SET-UP  
The camera will normally give an optimal picture without the need  
for further adjustments. However for special circumstances advanced  
set up options are available.  
Hints for menu navigation  
How to use the 5 keys  
Up key  
Menu/select key  
Right key  
Left key  
Lock  
Down key  
Press the menu/select key to access the menus or to move to the  
next or previous menu.  
Press the menu/select key for approximately 1.5 seconds to open  
the Installer menu.  
Use the up or down keys to scroll up or down through a menu.  
Use the left or right keys to move through options or to set  
parameters.  
When in a menu, quickly pressing the menu/select key twice  
restores the selected item to its factory default.  
To close all menus at once from any menu, select the Exit item  
and hold down the menu/select key until the menu display  
disappears.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 10  
Menu Navigation  
Press the menu  
button  
MAIN MENU  
SHUT/AGC MENU  
LEVEL  
0
SHUTTER  
AGC  
AES  
ON  
ON  
OFF  
SHUT/AGC  
BLC  
OFF  
COLOR  
SYNC  
VPHASE  
ATW  
LINE LOCK  
0¡  
AUTOBLACK  
NIGHTSENSE  
EXIT  
EXIT  
Shutter/AGC Menu  
Main Menu  
COLOR MENU  
WHITE BAL  
RED-GAIN  
BLUE-GAIN  
ATW  
0
0
EXIT  
Color Menu  
Press the menu button  
for more than 5sec.  
LENS WIZARD  
DETECTED LENS  
DCIRIS  
Lens Wizard Menus  
INSTALLER  
SET BACK FOCUS NOW  
VERSION  
00.0010.XX  
LENS  
AUTO  
FAST  
SPEED  
LENS WIZARD  
EXIT  
WIZARD  
COAX COMM  
ON  
DETECTED LENS  
VIDEO  
DEFAULTS  
SET BACK FOCUS NOW  
EXIT  
SET LVL  
Installer Menu  
EXIT  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 11  
Main menu  
Function  
LEVEL  
Selection  
Description  
-15 - 0 - +15  
Adjusts video level.  
SHUT/AGC  
BLC  
Select next menu Shutter / Automatic Gain Control menu.  
ON  
When 'ON', the level is optimized at the center  
of the screen. Parts outside the center may be  
under- or over-exposed (this is normal).  
OFF  
COLOR*  
SYNC  
ATW  
Select to access the color menu. (See Color  
menu for detailed explanation).  
ATB HOLD  
Select next menu  
LINE LOCK  
INTERNAL  
Select 'LINE LOCK' to synchronize with the  
power supply frequency. Select 'INTERNAL'  
for use with internal synchronization  
(automatically selected with DC supply).  
V PHASE  
EXIT  
0-358º  
Adjusts the vertical phase offset (when in  
'LINE LOCK' mode).  
Exit the menu.  
*Note:  
If the camera (LTC 0455/x1 only) is in black & white high sensitivity  
mode (via NightSense™), the color settings and color menu are not  
accessible. The NightSense™ sensitivity boost must be selected OFF  
to make color adjustments.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 12  
Shutter/AGC menu  
Function  
Selection  
AES  
Description  
SHUTTER  
(AES) Auto-shutter sets the optimum shutter  
speed FL for manual iris lenses. (FL)  
Flickerless mode avoids OFF interference from  
light sources (recommended for use with  
video-iris or DC-iris lenses only).  
AGC  
ON/OFF  
ON/OFF  
Automatic gain control  
AUTOBLACK  
Autoblack automatically increases the visibility  
of details.  
NIGHTSENSE  
AUTO  
FORCED  
OFF  
Nightsense™* extends the low-light  
performance of the camera. AUTO mode, the  
camera automatically inches to monochrome in  
low-light conditions. Forced mode, the picture  
remains a high-sensitivity monochrome image.  
Some active noise or white spots may appear  
in the picture.  
EXIT  
Exit the menu.  
*Note:  
NightSense™ is only available on the LTC 0455/x1 cameras.  
Color Menu  
Function  
Selection  
Description  
WHITE BAL  
ATW  
AWB HOLD  
ATW: Auto tracking white balance allows the  
camera to automatically adjust for optimal  
color reproduction.  
AWB HOLD: Puts the ATW on hold and  
preserves the color settings.  
RED- GAIN*  
BLUE- GAIN*  
EXIT  
-5 - 0 - +5  
-5 - 0 - +5  
Offset factory white point alignment (reducing  
red introduces more cyan).  
Offset factory white point alignment (reducing  
blue introduces more yellow).  
Exit the menu.  
*Note:  
For special scene conditions only, it will be necessary to change the  
white point offsets.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 13  
Accessing installer menu  
To access the installer menu, press and hold the menu/select key  
for five seconds.  
Installer menu  
Function  
Selection  
Description  
VERSION  
Read-only firmware release number (for  
service purposes).  
LENS  
AUTO  
FAST  
Automatically detect lens type.  
A different lens type can be selected.  
SPEED  
Selects the response time of DC-iris lenses.  
Some lenses require slow lens control to avoid  
overshoots.  
WIZARD  
Access the lens wizard menu.  
COAX COM  
DEFAULTS  
ON/OFF  
If OFF Bilinx™ communication is disabled  
Select next menu Return all set-up settings to  
factory defaults.  
EXIT  
Exit the menu.  
Lens wizard menu  
Function  
Description  
SET BACK FOCUS NOW Back focus the lens (see 'Back focus adjustment'). The  
scene is focused at maximum lens opening to ensure  
that the object of interest remains in focus in bright and  
low-light conditions.  
SET LVL  
When a Video-iris lens is detected, a level  
potentiometer is displayed to obtain the best picture  
performance. The lens wizard includes a level detector  
meter that must be set to the center using the  
potentiometer for best results.  
EXIT  
Exit the menu.  
Bosch Security Systems | 2004-12 | Version 3  
LTC 0435 & LTC 0455 | Installation Manual  
EN | 14  
Adjustment procedure DC-iris Lens:  
1. Unlock the back focus locking button.  
2. Access the "Lens Wizard" menu.  
3. The "SET BACK FOCUS NOW" option is highlighted in the  
menu.  
4. Turn the back focus adjustment as required.  
5. Lock the back focus locking button.  
6. Exit the menu.  
Adjustment procedure Manual-iris Lens:  
1. Unlock the back focus locking button.  
2. Adjust the lens to the maximum lens opening.  
3. Turn the back focus adjustment as required.  
4. Lock the back focus locking button.  
Adjustment procedure Video-iris Lens:  
1. Unlock the back focus locking button.  
2. Access the "Lens Wizard" menu.  
3. The "SET BACK FOCUS NOW" option is highlighted in the  
menu.  
4. Turn the back focus adjustment as required.  
5. Select the "SET LVL" option in the menu, and the LEVEL bar  
appears.  
6. Adjust the level potentiometer located on the lens until the  
LEVEL bar is in the central position.  
7. Lock the back focus locking button.  
8. Exit the menu.  
Bosch Security Systems | 2004-12 | Version 3  
Bosch Sicherheitssysteme GmbH  
Ludwig-Bölkow-Allee  
Bosch Security Systems B.V.  
P.O. Box 80002  
85521 Ottobrunn  
5600 JB Eindhoven  
Germany  
The Netherlands  
3122 165 23071 04-05  
© 2003 Bosch Security Systems B.V.  
Subject to change Printed in Portugal  

Alpine TME M710 User Manual
Audiovox PROVE8 User Manual
Blaupunkt CASABLANCA MP56 User Manual
Bryan Boilers Broile System User Manual
Dual XDVD8281 User Manual
FujiFilm FINEPIX 16230243 User Manual
FujiFilm FINEPIX JZ200 User Manual
Fusion Electronics Car Speaker MS BX3020 User Manual
Infinity Softworks Palm Computing Platform User Manual
JVC GR DVX818 User Manual