BlueAnt Wireless X3 User Manual

Quick Start Guide  
Quick Start Guide  
Inside the box  
Pairing the Headset to a Mobile Phone  
One Bluetooth Headset.  
1. Charge the X3 micro for at least 4 hours before use. Reboot the mobile phone.  
2. Long Press the MFB (Multi-Function Button) to turn the X3 micro ON.  
One X3 micro User Guide.  
One Quick Start Guide.  
(The X3 may go straight into Pairing mode and not require the next step,  
LED flashes Red to Blue)  
One USB charging cable.  
One car lighter adapter for USB charging cable.  
One AC wall charger  
3. Long press Vol  
to enter Pairing mode. LED flashes Red to Blue.  
4. Turn Bluetooth ON in your phone.  
One soft gel earbud cover  
One foam earbud cover  
5. Perform a device discovery to search for the X3 micro.  
6. When devices are displayed, select the X3 micro. Enter Passkey “1234”.  
7. Set the X3 micro as a trusted/authorised device, if optional in your phone.  
One removable ear-hook.  
8. Short press the MFB  
Voice dialing will be activated if it is enabled in your phone.  
To cancel voice dialing, hort press the MFB  
once to connect to your phone.  
s
.
9. For X3 operations refer to Function / Button Matrix below.  
To pair up to 2 more devices; phones, smartphones, pda’s or computers  
1. Short press the MFB  
and Vol  
together to disconnect the current phone.  
2. Repeat steps 5 – 8 for each device you want to pair.  
3. See Multi Connect Call Switching below.  
Function / Button matrix  
Reconnecting the Headset  
Once the Headset has been disconnected (by switching off  
or going out of range) you will need to reconnect by:  
Function  
Button  
long press for 3 seconds  
Power on/off  
Pair  
long press for 3 seconds  
1. Short pressing the MFB  
Voice dial using the current connected phone when connected  
Once for the first paired phone  
Voice dial through the first paired phone when not connected  
Twice for the second paired phone  
Three times for the third paired phone.  
Cancel voice dialing  
Cancel last call redial  
Answer a call  
short press 1 time  
2. Voice dialing will be activated if enabled in phone  
End a call  
To cancel voice dialing Short press the MFB  
short press 2 times  
short press 3 times  
short press 5 times  
Voice dial through the second paired phone when not connected  
Voice dial through the third paired phone when not connected  
Multi Connect Call Switching  
To disconnect from the currently connected phone and  
switch to another:  
Turn on/off LED lights (disconnect from phone first)  
1. Short press the MFB  
2. Short press the MFB  
and Vol  
together  
Last call redial using the current connected phone when connected  
Last call redial using the first paired phone when not connected  
long press for 3 seconds  
Reject a call  
long press for 3 seconds  
short press 1 time  
short press 1 time  
short press 1 time  
Once for the first paired phone  
Twice for the second paired phone  
Three times for the third paired phone.  
Volume up  
Volume down  
Mute / Unmute the microphone  
Disconnect the Bluetooth connection to the current phone  
Audio transfer from the headset to your phone  
short press 1 time  
short press 1 time  
Reset (deletes all stored pairing information)  

Arcam Pre amp Processor AVP700 User Manual
Barco R9842040 User Manual
Canon 300 TL User Manual
Electrolux Thermetic 583396 User Manual
Franklin Car Amplifier roadie unplugged mobile amped audio system User Manual
FujiFilm LAS 3000 User Manual
Grace GDI IR2000 User Manual
Hypertec N16638LHY User Manual
JVC Car Video System VC R70P HDA User Manual
JVC GR FXM39 User Manual