Blaupunkt TRAVELPILOT LUCCA 3 3 User Manual

igation

Mobile Nav

TravelPilot Lucca 3.3

Operating Instructions

(long version)

Device Overview

The following button are located be-

side the display:

Power (Screen ON/OFF):

Long press (longer than three

seconds): Switches the power

on/off.

Short press: Switches the screen

on/off. (battery saving mode)

Menu:

Long press (longer than three

seconds): Opens the main menu

screen of the device.

Short press: Opens the quick set-

tings menu.

3. 3.5" LCD Touchscreen:

4. Headphone jack

5. SD card slot

All entries and the control of

Lucca are carried out in a simple

and intuitive way by touching the

buttons displayed on the touch-

screen.

DC power input jack

Device Overview

The underside features the following controls:

7. USB Port

8. Connects the Lucca to the suction cup

Contents

Device Overview......................2

Safety notes.............................9

Safety Notes for Navigation ............ 9

Menu Button ..........................16

Quick Settings ........................... 16

Info ............................................ 16

Additional Functions.................. 16

Safety Notes for Handling the

Lucca .............................................. 9

Operating the Navigation

Menus.....................................17

Initial Startup of Lucca..........10

Lucca Scope of Delivery ............... 10

Protective Films and Covers ......... 11

Power On/Off.........................11

Setting the Language.............12

Charging the Battery .............12

Installation in the Vehicle .....13

Software Keyboard ....................... 17

Entering Blank Spaces............... 17

Deleting Characters................... 17

Switching between Number,

Umlaut and Character Input ...... 18

Lists.............................................. 18

Buttons......................................... 19

Information................................... 19

GPS Status ................................ 19

Navigation..............................21

Attaching the Suction Cup......... 13

Removing the Suction Cup ........ 14

Installing Lucca in the Suction

Cup............................................ 14

General Notes about the

Navigation..................................... 21

Removing the Lucca................... 14

Power On/Off.........................15

Starting the Navigation................. 21

Power-on.................................... 15

Activating the Idle State............. 15

Power-off ................................... 15

Reactivating............................... 15

Entering a Destination ............... 22

Navigating Home........................ 22

Showing a Map .......................... 22

Settings...................................... 22

Contents

Exiting the Menu ....................... 22

Additional Functions.................. 22

GPS Info..................................... 23

Route Planning........................... 23

Select Map................................. 23

Copying the Destination from the

Favourites ..................................... 37

Copying a Favourite for

Destination Guidance ................ 37

Additional Functions ................. 38

Copying one of the Recent

Destinations.................................. 38

Performing Basic Settings ............ 23

Setting the Time Zone ............... 23

Entering the Home Address....... 24

Additional Functions ................. 39

Using Home Address as

Destination ................................... 39

Specifying a Destination............... 25

Entering a Destination ............... 25

Entering a Destination Country . 25

Entering a Destination Address . 26

Additional Functions ................. 27

Managing Destinations..........40

Saving Destinations ...................... 40

Saving one of the Recent

Destinations............................... 41

Selecting a Point of Interest ......... 28

Renaming a Destination............. 41

Deleting a Destination ............... 42

Deleting the Complete List........ 42

Point of Interest in the Current

Vicinity....................................... 28

Additional Functions ................. 30

Point of Interest at a Speciﬁc

Location..................................... 30

Special National Destination ..... 32

Route Planning with Stages...43

Entering Destination Points....... 43

Editing, Saving and Managing

Copying a Destination from

Routes........................................ 44

the Map......................................... 34

Changing the Order ................... 45

Deleting a Route Point............... 45

Deleting a Complete Route List. 45

Moving the Map Section ............ 34

Contents

Managing Routes .......................... 45

Mute........................................... 54

Settings...................................... 54

Block Road, Unblocking............. 54

Inserting an Interim Destination .. 55

Route Options............................ 55

Next Destination........................ 55

Saving a route............................ 45

Loading a route.......................... 46

Calculating a Route....................... 46

Displaying the Route on the Map. 47

Simulation (demo mode)........... 47

Map Display during

Destination Guidance ............56

Navigation Tools......................... 56

Route Information...................... 57

Signpost Information................. 57

Speed Limit ............................... 57

Specifying Route Options......47

Destination Guidance ............49

Disturbed GPS Reception.......... 50

Quitting the Destination

Guidance.................................... 50

Reaching the Place of

Destination ................................ 50

Showing Additional Map

Information................................... 58

Working with the Map...........51

Map Information ........................ 58

Route Information...................... 59

Signpost Information................. 59

Speed ........................................ 59

Map Operation.............................. 51

Showing a Map .......................... 51

Touching the Map ...................... 51

Buttons......................................... 52

Additional Functions during

Navigation..............................61

With Map View without GPS

Reception................................... 52

With Map View with GPS

Reception................................... 52

Inserting an Interim Destination... 61

Approaching the Next Destination.. 62

Blocking route segments.......62

Manual Blocking......................... 62

Additional Functions.................. 54

Day/Night Mode......................... 54

Contents

Unblocking................................. 63

Selecting MP3 Mode..................... 72

Starting Playback.......................... 72

Selecting a MP3 ﬁle...................... 72

Playback the MP3 File................... 73

Repeated Play (Repeat)................ 73

Quitting Playback.......................... 73

Removing the SD Card.................. 74

Picture Viewer Mode .............74

Conﬁguring Lucca/

Basic Settings ........................64

Settings ........................................ 64

Language ................................... 64

Home Address ........................... 65

Map Information ........................ 65

Route Information...................... 65

Routing Options......................... 66

Route Planning........................... 66

Signpost Information................. 66

Speed Limit ............................... 66

Auto Mode ................................. 67

Time Zone.................................. 68

Format ....................................... 68

Representation .......................... 69

Voice command ......................... 69

Factory Settings......................... 69

Touchscreen............................... 69

Product Information .................. 70

Starting the Picture Viewer........... 74

Selecting a Picture ﬁle............... 75

Starting the Slide Show................ 75

Starting the Full Screen................ 76

Removing the SD Card.................. 77

Installing Street Maps ...........77

Removing the SD Card............... 78

Technical Data........................78

Disposal of old unit ...............79

Service ...................................79

Warranty ................................80

GPS Mode of Operation ........70

MP3 Mode..............................71

Preparing the SD Card.................. 71

Inserting the SD Card................... 71

Fault Removal / Frequently

Asked Questions FAQ............80

Safety notes

Notes:

Safety notes

• Routes are best planned before

starting your trip. If you want to

enter a new route while on the

road, please head for the next

parking or rest area!

For your personal beneﬁt, please

carefully read the following safety

notes and warnings before operating

your Lucca for the ﬁrst time.

• If you did not understand the voice

information or if you are not sure

what to do at the next intersec-

tion, use the map or arrow display

for quick orientation.

Safety Notes for Navigation

Caution:

Do not operate the Lucca while driv-

ing to protect yourself and others

against accidents!

View the display only if you are in a

safe travel situation!

Safety Notes for Handling

the Lucca

The street routing and trafﬁc signs

have priority over the instructions of

the navigation system.

Follow the instruction of the Lucca

only if circumstances and trafﬁc regu-

lations allow! Lucca will bring you to

your destination even if you have to

deviate from the planned route.

Caution:

Protect the device against moisture

since it is not waterproof and not

splashproof.

Notes:

• Remove the power supply connec-

tor of the Lucca if you switch off

Safety notes

Initial Startup

the engine since the GPS receiver

constantly uses electricity and

could discharge the vehicle bat-

tery.

Initial Startup of Lucca

If you are starting up the Lucca for

the ﬁrst time, you must set your pre-

ferred language for the menus and

the voice output.

• Do not unplug the connector by

pulling on the wire. The wire could

be damaged!

Note:

Upon purchasing the Lucca the

battery maybe empty. Please

charge the battery before using

the device.

• Do not use harsh solvents to clean

the device; use only a damp, lint-

free cloth.

When starting up the Lucca for the

ﬁrst time please allow the unit a

few minutes to enter navigation

mode.

Lucca Scope of Delivery

The scope of delivery contains the

following components:

Lucca Unit

Suction Cup

Connector charger for connecting

to cigarette lighter (Cigar Plug)

•

User's Manual (short version)

•

Initial Startup

Power on/off

CD/DVD with european road map

•

Power On/Off

and operating instructions (long

versions)

The Power button allows for turning

the Lucca on or off. In its delivery

state, the Lucca is switched off.

Optional Accessories:

➜ Press the Power button on the

bottom left-hand corner of the

Lucca for longer than three sec-

onds.

Carrying Case

DC Adapter

USB Cable

•

• Second car kit

VAN/SUV Suction Cup

•

Holder for air vent opening

Protective Films and Covers

Prior to the initial use, remove the

protective ﬁlms from the display and

front of the housing. Before inserting

an SD card, please remove the dum-

my card. To protect the contacts, you

can apply the elastic cover and dum-

my card again after using the Lucca.

Setting the Language

Charging the Battery

Setting the Language

Charging the Battery

If the Lucca is switched on for the

ﬁrst time, US English is used as the

standard language. If necessary, you

may have to set the desired language

for the menus and the voice output:

The rechargeable battery allows for

operating the Lucca battery-operated

without the external power supply.

The charge indicator of the battery

is located in the top center of the

screen. The symbols have the follow-

ing meaning:

➜ Turn on the Lucca using the

Power button.

A dialogue menu displays. In this

menu you can select your pre-

ferred language.

–

: The device is supplied by

an external power source. The

battery is fully charged.

: The device is supplied by

an external power source. The

battery is being charged.

: The device is supplied by

its internal battery. The charge

state of the battery is sufﬁ-

cient.

➜ Please follow the instructions.

The language is loaded and the

main menu is displayed.

–

: The device is supplied by

its internal battery. The charge

state of the battery is low.

The number of dark block segments

on the battery indicates the charge

Charging the Battery

Installation in the Vehicle

state of the battery (0 to 3 seg-

ments).

Installation in the

Vehicle

Note:

For temporary installation in a vehi-

cle, the Lucca features a suction cup

to attach it to the windshield.

If the charge state of the battery

is very low, a warning message is

displayed.

➜ To charge the battery, attach the

supplied charger to the charging

socket.

Caution:

Install the Lucca so that it does not

block your view and does not distract

from the trafﬁc.

Note:

Use only original chargers for op-

erating and charging the battery.

Do not install the Lucca in the airbag

deployment area.

Ensure that the Lucca does not pose

a threat to passengers in the vehicle

in case of emergency braking.

Note:

Do not discard any batteries in the

household trash; instead, return

them to the corresponding collec-

tion sites.

Attaching the Suction Cup

The Lucca can be installed in the ve-

hicle in a simple and safe way using

the supplied suction cup.

➜ Locate a suitable place for install-

ing the Lucca.

➜ To ensure a perfect hold, the glass

must be free of dust and oil. If nec-

essary, clean the glass ﬁrst.

Installation in the Vehicle

➜ Press the suction plate of the sup-

port against the glass.

➜ Push the lever on the suction cup

towards the glass.

➜ The track for mounting the Lucca

Installing Lucca in the Suction Cup

The suction cup features a track for

mounting the Lucca on the inside.

➜ Carefully push the guide of the

Lucca over the track of the suc-

tion cup.

must be aligned vertically.

Removing the Suction Cup

If you change vehicles, you can simply

remove the suction cup.

➜ Push the lever on the suction cup

away from the glass.

➜ Carefully loosen the suction plate

at the edge from the glass so that

air can enter between suction cup

and glass.

➜ Carefully pull the suction cup off

Removing the Lucca

➜ Pull the Lucca up and out of the

of the glass.

suction cup.

Power on/off

Reactivating

Power On/Off

Power-on

➜ Brieﬂy push the Power button to

power on the Lucca.

➜ To power on the Lucca, push the

Power button.

The device switches on and dis-

plays the logo screen.

Activating the Idle State

➜ To activate the idle state, brieﬂy

push the Power button.

The Lucca switches to the idle

state (screen off state).

Power-off

➜ To power off the device, press and

hold the Power button for longer

than 4 seconds.

The Lucca is switched off.

Note:

In the power-off mode the Lucca

is still using small amount of en-

ergy from the battery. After long

period of time there is a possibil-

ity that the battery may need to be

re-charged.

Menu Button

Additional Functions

Menu Button

Quick Settings

In the Quick Settings menu volume

and brightness can be adjusted. The

Quick Settings menu can be entered

at any time independent of the cur-

rent menu being active.

➜ Touch the More button in the

Quick Settings menu to gain ac-

cess to additional functions.

Information

•

– Touch the Information button

to gain access to product infor-

mation.

➜ Touch the Menu button.

Battery

•

The Quick Settings menu displays.

– Touch the Battery button.

➜ Touch the

volume or brightness.

✚ Touch this button to re-

turn to the previous menu.

buttons to adjust

The battery status displays.

Power Saving

•

➜

– Touch the Power Saving but-

ton. The Power Saving menu

displays.

Note:

After 5 seconds without touching

– Backlight Time Out: Touch the

square on the right side to set

the time until the backlight will

be switched off after the last

operation (for battery saving).

Press the OK button to con-

ﬁrm.

– Battery Warning Time Out:

Touch the square on the right

side to set the timing for the

battery warning. The battery

warning will be displayed ac-

the display Lucca returns automat-

ically to the previous menu.

Info

Prerequisite:

A Navigation is active.

•

➜ Touch the Info button in the Quick

Settings menu.

The last voice instruction is re-

peated.

Menu Button

cordingly before the battery

Operating the Navigation Menus

Operating the

Navigation Menus

runs out. Press the OK button

to conﬁrm.

Software Keyboard

If text entries are required, the touch-

screen displays a software keyboard.

You can perform all entries using your

ﬁnger. Only capital letters can be en-

tered.

You do not have to enter any special

characters or umlauts when entering

city or street names. The Lucca com-

pletes these characters automati-

cally.

Entering Blank Spaces

➜ To enter a blank space, touch the

button.

Deleting Characters

➜ To delete the last character, touch

the

button.

Operating the Navigation Menus

Switching between Number, Umlaut

and Character Input

List

In many cases, you can display lists

from which you can select an entry.

To enter numbers, such as postcode,

touch the

button

➜

This is the case, for example, if you

do not enter the complete name of a

place during the entry. After every en-

try of a letter, the text ﬁeld shows the

ﬁrst entry that starts with the previ-

ously entered characters. To display a

list with additional matching entries,

touch the List button.

To return to the character entry

mode,

touch

➜

To enter an umlaut,

touch the button. The umlaut

➜

keyboard is displayed.

As soon as you enter an umlaut,

the character keyboard is auto-

matically displayed again.

The end of the list features entries

what contain the sequence of previ-

ously entered characters not at the

beginning, but in the middle or at the

end.

One entry of the list is always se-

lected.

Note:

Umlauts do not have to be en-

tered when entering address

information, but they may be

helpful for the description of

stored destinations and routes.

➜ The selected entry can be selected

by touching the OK button.

These lists contain the following but-

tons:

➜

: Touch the OK button to

accept the selected entry. Howev-

Operating the Navigation Menus

er, you can also directly touch an

entry to accept it.

: Touch this button to scroll

up in the list by one page (5 ele-

ments).

: Touch this button to scroll

down in the list by one page

(5 elements).

punkt start screen. Here, you can

open another application, such

as the MP3 player or the Picture

Viewer, or reopen the navigation.

➜

➜ More: Touch this button to obtain

access to additional functions. De-

pending on the menu in which this

button is located, different func-

tions are offered.

If this button is deactivated, no ad-

ditional functions are available.

➜ To scroll through the list by several

pages, repeatedly touch the corre-

sponding button.

Note:

Information

From the Navigation menu, you can

display the current GPS status at any

time.

If the list features more than 5 ele-

ments, the scroll bar indicates the

current position in the list.

➜

: Touch this button to return

to the entry without selecting a

list element.

GPS Status

The GPS status menu contains infor-

mation about your current position

and your current speed. In addition,

you can also save your current posi-

tion.

Buttons

Buttons are located on all menus of

the Lucca:

➜ In the Navigation menu, touch the

➜

: Touch this button to return

to the previously opened menu.

If you are in the Navigation menu,

this button takes you to the Blau-

More button.

The following window displays:

Operating the Navigation Menus

• Satellites: Number of satellites

received. The navigation requires

signals from at least three satel-

lites.

• HDOP: Horizontal Dilution of Pre-

cision. Indicates the quality of the

positioning. Theoretically, values

from 0 to 50 are possible, whereby

the following applies: The lower

the value, the more precise the

positioning (value 0 = no deviation

from the actual position). Values

up to 8 are acceptable for naviga-

tion.

➜ Touch the GPS Info button.

The GPS Status menu displays.

• Speed: Indicates the current

speed of the vehicle.

• Position: Indicates the address of

the current position (if possible).

• Save current position: Touch this

button to save the current posi-

tion to the favourites.

• GMT: Greenwich Mean Time Lon-

don time without daylight savings

time.

• Touch the

button to close the

GPS window.

• Longitude/Latitude, current Posi-

tion: Information of the east longi-

tude and north latitude.

Navigation

Starting the Navigation

➜ Power on the device using the

Navigation

General Notes about the

Navigation

The use of the Lucca is at your own

risk.

Power button.

➜ In the start screen, touch the Navi-

gation button.

Caution:

Do not operate the Lucca while driv-

ing to protect yourself and others

against accidents!

View the display only if you are in a

safe travel situation!

The street routing and trafﬁc signs

have priority over the instructions of

the navigation system.

The Navigation menu displays.

Follow the instruction of the Lucca

only if circumstances and trafﬁc regu-

lations allow! Lucca will bring you to

your destination even if you have to

deviate from the planned route.

Navigation

The Navigation menu allows access to

all the functions of the navigation.

For further details, please read the

section "Conﬁguring Lucca/Basic

Settings".

Entering a Destination

Exiting the Menu

➜ Touch the Destination entry but-

ton to enter a destination for the

navigation.

For further details, please read the

section "Entering a Destination".

➜ In the Navigation menu, touch

to quit the navigation. The

Lucca start screen displays.

Additional Functions

Navigating Home

➜ Touch the More button to gain ac-

cess to additional functions of the

Navigation.

The list of additional functions dis-

plays.

➜ Touch the Home button to use

your stored home address as the

destination for the navigation.

For further details, please read the

section "Using the Home Address as

Destination".

Showing a Map

➜ Touch the Show map button to

display the loaded street map.

For further details, please read the

section "Working with the Map".

Settings

➜ Touch the Settings button to ad-

It contains the following functions:

just the settings of your Lucca.

Navigation

GPS Info

Setting the Time Zone

➜ Touch the GPS Info button to ob-

tain information about the current

GPS status and about your current

position.

➜ In the Navigation menu, touch the

Settings button.

The Settings menu displays.

Touch the

screen displays the Time zone

button.

button until the

➜

Route Planning

➜ Touch the Itinerary button to plan

Next, touch Time zone.

a route with several stages.

The Time zone menu displays.

For further details, please read the

section "Route Planning with Stag-

es".

Select Map

➜ Touch the Select Map button to

choose between different avail-

able road maps.

Performing Basic Settings

Before you work with the Lucca,

• you should set the time zone of for

your position so that the correct

arrival times are displayed during

the navigation, and

• you should enter your home ad-

dress to quickly navigate home

from any location.

Touch Time zone.

➜

➜ Touch the time zone in the list

that is valid for your current

position (GMT without daylight

savings time).

Navigation

Note:

The selection is facilitated by the

display of the capitols in the re-

spective time zone.

➜ Touch the OK button.

➜ If daylight savings time currently

applies to your position, touch the

Daylight saving time button.

The button displays a check mark.

➜ Touch the Enter your home ad-

Note:

dress button.

If the time is changed at your po-

sition or if you drive into a differ-

ent time zone, you must adjust the

corresponding settings.

The Destination entry menu dis-

plays.

➜ Touch the Address button and en-

ter your home address. See "En-

tering a Destination Address".

➜ Touch the OK button.

The Navigation menu displays.

➜ Touch the Set as home address

Entering the Home Address

button.

The address is copied into the

Home address menu.

➜ In the Navigation menu, touch the

Settings button.

➜ Touch the OK button.

The Settings menu displays.

The Navigation menu displays

again.

➜ Repeatedly touch the

buttons

until the Home address button

displays.

➜ Touch the Home address button.

The Home address menu displays.

Navigation

Note:

Specifying a Destination

This entry does not have to be

repeated. If your destination is in

a different country than the pre-

vious one, you must re-enter the

country.

This section contains information

about the different methods for en-

tering, selecting and managing desti-

nations with the Lucca.

How to start the navigation to a des-

tination is described in the chapter

"Destination Guidance".

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

Entering a Destination

With the Lucca, you can enter or se-

lect destinations in different ways:

• Entering a destination address

• Selecting a point of interest

• Copying a destination from the

map

• Copying a destination from the fa-

vourites

• Reusing one of the Last destina-

➜ Touch the Destination entry but-

tions

ton.

• Using the home address

Entering a Destination Country

First, enter the country in which your

destination is located.

The Destination entry menu dis-

plays.

Navigation

Note:

Youcanonlyselectcountrieswhich

are at least partially displayed on

the currently loaded map.

Entering a Destination Address

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

➜ In the Navigation menu, touch the

➜ Touch the Country button.

Destination entry button.

The Destination entry menu dis-

The list of countries displays.

plays.

➜ Touch the Address button.

The Address menu displays.

➜ Touch the country in which your

destination is located.

The Address menu displays.

Navigation

Note:

If the country containing your des-

tination is not displayed in the top

line, touch the button and

ﬁeld to enter the crossroad to the

deﬁned street.

Note:

How to save a deﬁned destination

is described in the chapter "Saving

one of the recent destinations".

select the correct country. How to

select a country is described in

the chapter "Entering a Destina-

tion Country".

Additional Functions

➜ Touch the Town ﬁeld and enter

the target location. You can

➜ Touch the More button to gain ac-

cess to additional functions of the

Address menu.

The list of Additional functions

displays.

The list of Additional functions con-

tains the following functions:

enter either the postcode

or the name of the location.

➜ Touch the Street ﬁeld

and

enter the street.

➜ If you know the house number of

your destination, touch the House

Number ﬁeld to enter the

house number.

• Route options:

– Here you can set the route op-

tions for the next navigation.

Note:

For further details, please read the

chapter "Specifying route options".

If no house number is stored for

the speciﬁed street in the maps,

the House Number ﬁeld is deacti-

vated.

• Show:

– Select this button to view the

speciﬁed address on the map.

For further details, please read the

chapter "Working with the map".

➜

If you want to deﬁne an in-

tersection as the destina-

tion, touch the Intersection

Navigation

➜ In the main menu touch the Navi-

• Save:

gation button.

– This function allows you to save

The Navigation menu displays.

➜ In the Navigation menu, touch the

the speciﬁed address to your

favourites.

For further details, please read the

chapter "Saving one of the recent

destinations".

Destination entry button.

The Destination entry menu dis-

plays.

➜ Touch the Points of interest but-

Selecting a Point of Interest

ton.

Special destinations, also referred to

as POI (Point of interest), are part of

the map and can be displayed on the

map. The points of interest include

airports and ferry harbours, restau-

rants, hotels, ﬁlling stations, public

facilities and more. Special destina-

tions can be used as navigation des-

tinations.

The Point of interest menu dis-

plays.

Point of Interest in the Current

Vicinity

Note:

➜ Touch the ... nearby button.

Special destinations from the cur-

rent vicinity can only be selected if

the GPS reception is sufﬁcient for

determining the position.

The submenu displays.

Navigation

Only those subcategories are avail-

able for selection for which points of

interest can be located in the current

vicinity.

➜

Touch the Point of interest

ﬁeld to select a speciﬁc

target.

The keyboard is displayed. If you

know a part of the description of

the point of interest, it can be en-

tered here to shorten the list.

➜

Touch the Surrounding Ra-

dius ﬁeld and select the

radius in which you are

➜ Touch the List button.

A list with points of interest ap-

pears. The points of interest dis-

played correspond to the selected

category and subcategory. They

also contain the characters you

entered (if you entered any char-

acters).

looking for a point of interest.

Touch the Category ﬁeld

and select the category

(e.g. petrol station) from

which you want to look for points

of interest.

Only those categories are available

for selection for which points of in-

terest can be located in the current

vicinity.

➜ Touch the entry of the point of in-

terest to which you want to navi-

gate.

➜ If you desire more detailed infor-

mation about the point of interest,

touch the More button, followed

by Show details.

➜

Touch the Subcategory

ﬁeld and select the sub-

category (e.g. Aral, BP,

Shell, etc. from which you want to

look for points of interest.

➜ Touch the OK button to accept the

selected point of interest.

Navigation

Note:

Show:

•

You do not have to ﬁll out the

– Select this button to view the

speciﬁed address on the map.

ﬁelds Category and Subcategory.

They are only intended to restrict

the list of points of interest in the

Point of interest ﬁeld. This list can

quickly become very extensive,

particularly at larger locations.

For further details, please read the

chapter "Working with the Map".

Save:

•

– This function allows you to save

the speciﬁed address to your

favourites.

How to save a deﬁned destination is

described in the chapter "Saving one

of the Recent Destinations".

For further details, please read the

chapter "Saving one of the recent

destinations".

Additional Functions

➜ Touch the More button to gain ac-

cess to additional functions of the

Point of interest menu.

The list of Additional functions

displays.

The list of Additional functions con-

tains the following functions:

Point of Interest at a Speciﬁc

Location

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

➜ Touch the Destination entry but-

Route options:

– Here you can set the route op-

tions for the next navigation.

•

ton.

The Destination entry menu dis-

plays.

For further details, please read the

chapter "Specifying Route Options".

➜ In the menu, touch the Points of

interest button.

The Point of interest menu dis-

plays.

Navigation

Note:

If the country containing your des-

tination is not displayed in the ﬁrst

line, touch the

button twice

and select the correct country.

How to select a country is described

in the chapter "Entering a Destination

Country".

➜

Touch the Location ﬁeld

and enter the location in

which you are looking for a point

of interest. You can enter either

the postcode or the name of the

location.

➜ In the Point of interest menu, touch

the ...in a town button.

The submenu displays.

➜

Touch the Category ﬁeld

and select the category

(e.g. culture) from which

you want to look for points of in-

terest.

Only those categories are available

for selection for which points of in-

terest can be located in the speciﬁed

town.

➜

Touch the Subcategory

ﬁeld and select the sub-

Navigation

category (e.g. museum, theatre,

➜ Touch the entry of the point of in-

terest to which you want to navi-

gate.

...) from which you want to look

for points of interest.

Only those subcategories are avail-

able for selection for which points of

interest can be located in the speci-

ﬁed town.

➜ If you desire more detailed infor-

mation about the point of interest,

touch the More button, followed

by Show details.

➜

Touch the Point of Interest

ﬁeld.

➜ Touch the OK button to accept the

selected point of interest.

The keyboard is displayed.

If you know a part of the descrip-

tion of the point of interest, it can

be entered here to shorten the

list. However, you may also con-

tinue without an entry.

Special National Destination

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

➜ Touch the Destination entry but-

ton.

➜ Touch the List button.

The Destination entry menu dis-

plays.

A list with points of interest ap-

pears. The points of interest dis-

played correspond to the selected

category and subcategory. They

also contain the characters you

entered (if you entered any char-

acters).

➜ In the menu, touch the Points of

interest button.

The Point of interest menu dis-

plays.

Navigation

Note:

If the country containing your

destination is not displayed in the

ﬁrst line, touch the

button

twice and select the correct coun-

try. How to select a country is de-

scribed in the chapter "Entering a

Destination Country".

➜

Touch the Category ﬁeld

and select the category

(e.g. airport) from which

➜ In the Point of interest menu, touch

the ...nationwide button.

you want to look for points of in-

terest. The selection offers only

categories whose points of inter-

est have a national meaning.

The submenu displays.

Touch the Point of Interest

ﬁeld.

The keyboard is displayed.

If you know a part of the descrip-

tion of the point of interest, it can

be entered here to shorten the

list. However, you may also con-

tinue without an entry.

➜ Touch the List button.

A list with points of interest ap-

pears. The points of interest dis-

played correspond to the selected

Navigation

category. They also contain the

➜ In the destination entry, touch the

characters you entered (if you en-

tered any characters).

On map button.

The map is displayed.

➜ Touch the entry of the point of in-

terest to which you want to navi-

gate.

➜ If you desire more detailed infor-

mation about the point of interest,

touch the More button, followed

by Show details.

➜ Touch the OK button to accept the

selected point of interest.

Copying a Destination from

the Map

This function allows you to select the

destination for a navigation directly

on the map. In addition to towns and

streets, you can also quickly select

points of interest.

Moving the Map Section

To view the desired destination area

on the map, you can move the map

section and zoom in/out.

• Zooming/Moving

– Touch the Zoom/Move

to switch between zoom and

move mode.

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

– Zoom

➜ Touch the Destination entry but-

In the zoom mode (button not

pressed), you can zoom in and

out on the map. You can zoom

in by plotting a diagonal start-

ton.

The Destination entry menu dis-

plays.

Navigation

ing in the top left corner. You

can zoom out by plotting a di-

agonal starting in the bottom

right corner.

Note:

You can also zoom in and out using

the buttons.

– Move

In the move mode (button

pressed), you can move the

map. For this purpose, touch

the map, hold the pen or your

ﬁnger pressed and move the

map area in the desired direc-

tion.

Information about the selected

location is loaded from the data

stock and displayed. Below the

information ﬁeld are buttons with

which several functions can be

called that are available for the se-

lected route location.

➜ Touch the town (street or point of

interest) to be deﬁned as the des-

tination for a few seconds.

The town is identiﬁed by an or-

ange-dotted circle.

You have the following options:

Navigation

Note:

If you use this function during a

• Touch the Start navigation but-

ton to use the selected location as

place of destination for the naviga-

tion.

navigation, the route is immediate-

ly recalculated and the navigation

is subsequently continued.

Notes:

• Touch the Interim destination

button to add the selected desti-

nation to a route (as the next stage

to be approached). The route is

immediately recalculated and the

navigation is subsequently contin-

ued.

– This function is only available

with GPS reception.

– If you use this function during

a navigation, all previously de-

ﬁned route locations (stages

and destination points) are de-

leted!

• Touch the

button to return to

• Touch the Save button to save

the selected destination. You can

select the destination at any time

from the list of favourites.

the map view without executing a

function.

• Touch the Search nearby button

to search for a point of interest in

the vicinity of the selected desti-

nation.

• Touch the Add button to add the

selected destination to the end

of a route (as the last stage). The

route point is subsequently identi-

ﬁed on the map by a ﬂag and also

entered in the route point list in

the Itinerary menu.

Navigation

Copying the Destination

from the Favourites

The favourites contain all the destina-

tions you saved using the Save but-

ton.

You can perform the following in this

menu:

• Accepting destinations for the

navigation,

• renaming navigation destinations,

and

• deleting saved destinations.

➜ Touch the desired destination.

Note:

If you want to view the address

Copying a Favourite for Destination

Guidance

➜ In the main menu touch the Navi-

of a saved destination, touch this

destination. Touch More, followed

by Show details.

gation button.

The Navigation menu displays.

➜ Touch the OK button.

The Address menu displays. The

address of the selected destina-

tion is entered in the correspond-

ing ﬁelds.

➜ Touch the Destination entry but-

ton.

The Destination entry menu dis-

plays.

How to delete or rename a saved des-

tination is described in the chapter

"Managing Destinations".

➜ Touch the Favourites button.

The Favourites menu displays.

Navigation

Additional Functions

Copying one of the Recent

Destinations

The destinations approached last are

automatically stored in the Last desti-

nations list.

➜ Touch the More button to gain ac-

cess to additional functions of the

Favourites menu.

The list of Additional functions

displays.

It contains the following functions:

You can perform the following in this

list:

• Show details:

• Accepting a destination for the

– Touch the Show details button

to show the address of the se-

lected destination.

navigation,

• saving a navigation destination in

the Favourites, and

• Delete entry:

• deleting entries from the Last des-

– Touch the Delete entry button

to delete the selected destina-

tion.

tinations list.

➜ In the main menu touch the Navi-

gation button.

The Navigation menu displays.

• Delete all:

– Touch the Delete all button to

delete all the destinations from

the Favourites.

➜ Touch the Destination entry but-

ton.

The Destination entry menu dis-

plays.

For further details, please read the

chapter "Deleting a Destination".

➜ Touch the Last destinations but-

• Rename entry

ton.

– Touch the Rename entry but-

ton to change the designation

of the selected destination.

The Last destinations menu dis-

plays.

Navigation

Delete entry:

•

– Touch the Delete entry button

to delete the selected destina-

tion.

• Delete all:

– Touch the Delete all button to

delete all the entries of the Last

destinations list.

• Save under favourites:

– Touch the Save under favour-

ites button to save the selected

destination in the Favourites.

➜ Select the desired destination.

➜ Touch the OK button.

The destination is copied and the

address is entered in the corre-

sponding ﬁelds.

Using Home Address as

Destination

If your home address is saved, you

can quickly navigate home from any

location.

How to save your home address is

described in the chapter "Home ad-

dress".

Additional Functions

➜ Touch the More button to gain ac-

cess to additional functions of the

Last destinations menu.

The list of Additional functions

displays.

➜ In the main menu touch the Navi-

It contains the following functions:

gation button.

• Show details:

The Navigation menu displays.

➜ Touch the Home button.

– Touch the Show details button

to show the address of the se-

lected destination.

The route calculation is performed

and the navigation starts.

Navigation

Note:

Managing Destinations

The route type used for the route

Two lists are available in which indi-

vidual destinations are saved:

calculation is automatically select-

ed from the setting which you de-

ﬁned in the Routing options menu.

• In the Favourites

• In the Last destinations list

Each destination you specify and the

destinations from the Last destina-

tions list can be saved in the Favour-

ites. This is particularly useful if you

want to approach this destination

repeatedly.

Destinations from the Favourites can

be renamed.

You can delete individual destinations

from both lists.

Saving Destinations

Prerequisite:

• You speciﬁed a destination as de-

scribed in the chapter "Entering a

Destination".

➜ Touch the More button.

➜ Touch Save.

Managing Destinations

➜ Touch the More button.

A menu for entering a name is dis-

played.

➜ Touch Save under favourites.

➜ Enter a name for the destination.

➜ Touch the OK button.

The destination is saved in the Fa-

vourites.

Saving one of the Recent

Destinations

Prerequisite:

• You opened the Last destinations

list as described in the chapter

"Copying one of the Recent Desti-

nations".

A menu for entering a name is dis-

played.

➜ Enter a name for the destination.

➜ Select the destination which you

want to save in the Favourites.

➜ Touch the OK button.

The destination is saved in the Fa-

vourites.

Renaming a Destination

➜ Open the Favourites menu as de-

scribed in the chapter "Copying

the Destination from the Favour-

ites".

➜ Select the destination to be re-

named.

Managing Destinations

➜ Touch the More button.

A conﬁrmation menu is displayed.

➜ Touch Rename entry.

A menu for entering a name is dis-

played.

➜ Enter a new name for the destina-

tion.

➜ Touch the OK button.

The destination is renamed.

➜ Touch OK to delete the destina-

tion.

The destination is deleted from

the list.

Deleting a Destination

Prerequisite:

• You opened the Favourites as de-

scribed in the chapter "Copying

the Destination from the Favour-

ites"

Deleting the Complete List

Prerequisite:

• You opened the Favourites as de-

scribed in the chapter "Copying

the Destination from the Favour-

ites"

- or -

• you opened the Last destinations

list as described in the chapter

"Copying one of the Recent Desti-

nations".

➜ Select the destination to be de-

leted from the list.

➜ Touch the More button.

- or -

• you opened the Last destinations

list as described in the chapter

"Copying one of the Recent Desti-

nations".

➜ Touch the More button.

➜ Touch Delete entry.

Managing Destinations

Route Planning

➜ Touch Delete all.

Route Planning with

Stages

A conﬁrmation is displayed.

You can also perform the route plan-

ning without GPS receiver, e.g. in the

comfort of your home. Deﬁned routes

can be saved for reuse so that you

can plan any number of routes, e.g.

for your vacation.

➜ Touch OK to delete the list

- or -

Entering Destination Points

A route is planned as follows:

➜ In the Navigation menu, touch the

➜ touch

not to delete the list.

More button.

➜ Touch Itinerary.

The Itinerary menu displays.

➜ Touch the Add button to deﬁne

the ﬁrst route point.

Route Planning

The Destination entry menu dis-

plays.

saved and used for navigation at a

later time.

➜ Deﬁne the route point similar to

the destination entry. For more in-

formation, see the chapter "Enter-

ing a Destination".

You can insert additional route points

in the routes at any time, change the

order of route points or display the

route on the map.

➜ Touch the Add button.

The Itinerary menu provides various

buttons for this purpose:

➜ Touch the route point you want to

The Itinerary menu displays. The

deﬁned destination is listed as

route point 1.

select.

If the list features more than 3 en-

tries, use the following buttons:

➜ Touch the

the list by one page (3 elements).

➜ Touch the button to scroll

button to scroll up

down the list by one page (3 ele-

ments).

To scroll up or down the list by sev-

eral pages,

➜ touch the corresponding button

repeatedly.

Note:

➜ Repeat the steps for all additional

destinations to be added to the

route.

If the list features more than 3 ele-

ments, the scroll bar indicates the

current position in the list.

Editing, Saving and Managing

Routes

You can plan any number of routes,

e.g. for your vacation. They can be

Route Planning

Deleting a Route Point

Changing the Order

• Move route point up:

➜

Select the route point to be de-

leted.

➜ Select the route point to be

moved.

➜ Touch the More button.

➜ Touch the Move target up button.

➜

Touch the More button.

Touch Delete from route.

The route list is displayed again.

The Itinerary menu is displayed

again, the selected route point is

moved up in the route list by one

position.

Deleting a Complete Route List

➜ While the route list to be deleted

is displayed, touch the More but-

ton.

➜ Repeat this process until the route

point appears at the correct posi-

tion in the route list.

➜ Touch Delete the complete list.

Managing Routes

➜ Move route point down:

Saving a route

➜ Select the route point to be

moved.

➜ Touch the More button.

➜ Touch Save route.

➜ Touch the Move target down but-

A menu for entering a name is dis-

played.

ton.

The Itinerary menu is displayed

again, the selected route point is

moved down in the route list by

one position.

➜ Enter a name for the route.

➜ Touch OK.

Note:

The route points are saved. If you

load a saved route, it must be re-

calculated.

➜ Repeat this process until the route

point appears at the correct posi-

tion in the route list.

Route Planning

Loading a route

complete trip from the ﬁrst to the

last route point and the estimated

travel time for this trip instead of

the Calculate button.

In addition, the distance from the

previous route point and the esti-

mated travel time for this stage are

displayed for each route point.

➜ Touch the More button.

➜ Touch Load route.

➜ Select the desired route.

➜ Touch OK.

Calculating a Route

A planned route can also be calculat-

ed without GPS reception so that you

can gain an overview of the trip.

In this case, the ﬁrst deﬁned route

point is set as the starting point of

the route.

Note:

For a navigation, the current posi-

tion is the starting point. The ﬁrst

stage is the travel to the ﬁrst de-

ﬁned route point.

➜ Touch the Calculate button to cal-

culate the complete distance as

well as the estimated travel time

of the route.

The route is being calculated. A

window displays the progress of

the calculation.

After the calculation is complete,

the Itinerary menu displays the

Route Planning

Specifying Route Options

Displaying the Route on the Map

Specifying Route

Options

➜ Touch the Show button to display

the entire route on the map.

In the Routing options menu, you can

deﬁne the speed proﬁle of your vehi-

cle, select the type of routing and ex-

clude certain streets from usage. The

route options remain valid for each

destination guidance until the next

change of the route options.

The map is displayed.

The route is highlighted in blue.

The speciﬁed route points are

identiﬁed by ﬂags.

Simulation (demo mode)

➜ Touch the map.

A selection menu appears.

➜ Touch "Simulation".

➜ In the Navigation menu, touch the

Settings button.

The Settings menu displays.

The route is automatically travelled

and driving recommendations are

output.

➜ Touch the

the list by one page (3 elements).

➜ Touch the button to scroll

button to scroll up

➜ Touch

to end the simula-

down the list by one page (3 ele-

ments).

To scroll up or down the list by sev-

eral pages,

➜ touch the corresponding button

repeatedly.

➜ In the Settings menu, touch the

tion, otherwise the simulation is

repeated.

Note:

The simulation distance must be

less than 100 kilometres.

Routing options button.

The Routing options menu dis-

plays.

Specifying Route Options

be included in the route calcula-

tion or avoided.

• Permitted

– This option includes the cor-

responding street type in the

calculation of the route.

• Avoid

– This option avoids the corre-

sponding street type as far as

possible.

➜ Touch the Speed proﬁle ﬁeld to

change between the available pro-

ﬁles.

➜ Touch the Type of routing ﬁeld

to change between the various

modes:

• Forbidden

– This option does not include

the corresponding street type

in the calculation of the route.

• Fast route

– This option calculates the

shortest route for the required

time.

• Short route

– This option calculates the

shortest route for the kilome-

tres to be travelled.

➜ Sequentially touch the ﬁelds Mo-

torways, Ferries and Toll roads

and specify whether they should

Destination Guidance

Prerequisite:

• You speciﬁed a place of destina-

tion as described in the chapter

"Entering a Destination"

- or -

• you selected a place of destination

from the Favourites as described in

the chapter "Copying the Destina-

tion from the Favourites"

Notes:

- or -

• The route is calculated using the

currently valid settings for the

route calculation. The settings for

the route options can be viewed

and changed via the Routing op-

tions menu. For detailed infor-

mation, please read the chapter

"Specifying route options".

• you selected a place of destination

from the Last destinations list as

described in the chapter "Copying

one of the Recent Destinations"

- or -

• you planned or loaded a route (as

described in the chapter "Route

Planning with Stages").

• If the navigation for a route is start-

ed, the starting point is always the

current position. The ﬁrst stage of

the route is the ﬁrst deﬁned route

point.

➜ Touch the Start navigation but-

ton.

The route is being calculated.

The map is displayed. Your current

position is represented by a yellow

triangle. The route is highlighted

in blue.

Destination Guidance

Disturbed GPS Reception

Quitting the Destination Guidance

A message appears after entering the

destination if no adequate GPS signal

is received.

➜ Touch this button

to quit

the destination guidance.

A conﬁrmation dialogue appears.

➜ Touch OK to quit the destination

guidance.

If you quit the destination guidance

before reaching your destination, the

Navigation menu opens. You can now

enter a new destination or continue

the navigation to the original destina-

tion by selecting the original desti-

nation again from the "Last destina-

tions".

• If you are in an enclosed room,

move to the outside. The Lucca re-

quires a vertical line towards the

sky.

Reaching the Place of Destination

If the GPS reception is disturbed

during the destination guidance, the

navigation is stopped.

As soon as the reception is re-estab-

lished, the navigation system auto-

matically recognises whether your

position has changed and, if neces-

sary, recalculates the route. At that

time, you can simply continue your

navigation.

As soon as you have reached the des-

tination point, the message "You have

reached your destination" appears.

At this point, the map displays only

your current position (yellow arrow).

Working with the Map

• Via the Show button in the ad-

ditional functions in the Address

menu after selecting a destina-

tion.

Working with the Map

Map Operation

In this section you learn which in-

formation and which processing op-

tions are available in the map view.

Depending on whether you display a

map without or during the navigation,

different options are available for op-

eration.

Touching the Map

➜ Brieﬂy touch the map to display

additional functions.

Depending on whether you are cur-

rently in an active navigation or only

display the map, only certain func-

tions are available.

Showing a Map

You can display the map

• during route planning,

➜ Touch the map for a few seconds

to display information about the

location you touched, and you can

also select it as navigation desti-

nation.

For further details, please read the

section "Copying a Destination from

the Map".

• to display destinations on the

map, or

• to copy destination from the map

for the navigation.

You can open the map view as fol-

lows:

• Via the Show map button in the

Navigation menu.

• Via the On map button in the Des-

tination entry menu.

Working with the Map

Buttons

Different buttons are available in the

map view with which you can adjust

the display according to your needs.

•

The Change button allows

you to display additional options

in map view.

• Fix position/Fix map

– This button is only active dur-

With Map View without GPS

Reception

ing a navigation. Touch the Fix

position/Fix map

but-

• Show/hide buttons

ton to toggle the map view

between "Position ﬁxed" and

"Map ﬁxed".

– More

This button allows you to hide

the other buttons to gain a

better overview of the map.

Touching it again redisplays

the auxiliary buttons.

– Map ﬁxed

In this mode (button not

pressed), the map is ﬁxed and

the current position (yellow ar-

row) moves across the map.

With Map View with GPS Reception

– Position ﬁxed (standard set-

ting)

• Auto mode

– More

In this mode (button pressed),

the map is continually moved

so that the current position

(yellow arrow) is always closely

centred in the bottom third of

the map.

Touch this button to restore

the standard view of the map

after making changes. In doing

so, the settings for the map

orientation and auto zoom are

applied, the auxiliary but-

tons are hidden and the map

is centred according to your

position.

Note:

The "Map ﬁxed" mode is automati-

cally set as soon as you move the

map; otherwise, the map would

Working with the Map

constantly jump back to the cur-

rent position. This mode should

also be set if you want to select

destination points from the map

during the navigation.

• Showing the complete route

– Touch this button to dis-

play the complete route on the

map.

• Map in travel direction/Map to

• Zooming/Moving

north

– Touch the Zoom/Move

button to switch between zoom

and move mode.

– Touch the In travel direction/To

north

button to toggle the

map view between travel direc-

tion and aligned to north.

– Zoom

– Align map to north

In the zoom mode (button not

pressed), you can zoom in and

out on the map. You can zoom

in by plotting a diagonal start-

ing in the top left corner. You

can zoom out by plotting a di-

agonal starting in the bottom

right corner.

Touch this button (button not

pressed) to align the map in the

direction north.

– Map in travel direction

Touch this button (button

pressed) to align the map in the

travel direction.

– Move

• 3D-view

In the move mode (button

pressed), you can move the

map. For this purpose, touch

the map, hold the pen or your

ﬁnger pressed and move the

map area in the desired direc-

tion.

– Touch this button to display

the map in a three-dimensional

representation from a bird's

eye view.

•

2D-view

– Touch the More, button to dis-

play the map in two-dimension-

al form again.

Working with the Map

• Zoom out

– Touch this button

out of the map.

to zoom

• Zooming level bar between the

buttons

– Touch one of the sections of

the bar to zoom in or zoom out

of the map.

• Zoom in

– Touch this button

to zoom in

to quit

Day/Night Mode

on the map.

➜ Touch the Night mode button to

set the map display "Night" or

"Day".

• Quit navigation

– Touch this button

the navigation.

Mute

Additional Functions

➜ Touch the Mute button to switch

➜ Brieﬂy touch any position on the

map to activate additional func-

tions. Depending on whether you

are currently in a navigation or

only display the map, only certain

functions are available.

the voice instructions on or off.

Settings

➜ Touch the Settings button to dis-

play the Settings menu.

For further details, please read the

section "Settings".

The menu with the additional func-

tions displays.

Block Road, Unblocking

The Block road button is only avail-

able during a navigation. For fur-

Working with the Map

ther details, please read the section

"Blocking Route Segments".

➜ Touch the Next destination but-

ton to approach the next to one

route point.

Inserting an Interim Destination

The route is recalculated so that

the next to one route point can be

approached as the next destina-

tion.

➜ Touch the Interim destination

button to insert a new interim des-

tination during the navigation.

The route is recalculated so that

this interim destination can be ap-

proached as the next destination.

Afterwards, all subsequent route

points are selected.

For further details, please read the

section "Approaching the Next Des-

tination".

For further details, please read the

section "Inserting an Interim Destina-

tion".

Route Options

➜ Touch the Route options button to

change the route options.

For further details, please read the

section "Routing options".

Next Destination

This function is only available during

a navigation on a route with at least

one interim point. Use this function

if you want to skip the next route

point.

Map Display during Destination Guidance

• In case of actions that must be

Map Display during

executed in brief succession, the

next to one action is displayed in

the small upper arrow ﬁeld.

Destination Guidance

During a navigation, the map display

shows different navigation tools,

route information and one additional

button:

• The yellow triangle represents

your position on the map. A con-

tinually changing map section en-

sures that the current position is

always closely centred on the map

(so-called moving map).

• The large lower arrow ﬁeld dis-

plays the next action and the dis-

tance to the next action.

Navigation Tools

The left and lower area of the map dis-

play the following navigation tools:

If you come closer to the action

location, a bard is displayed to

the right of the large arrow ﬁeld

instead of the distance:

– The more yellow bars are dis-

played, the closer you are to

the location of the next action.

• The upper street ﬁeld displays the

next street name.

Map Display during Destination Guidance

Signpost Information

• The lower street ﬁeld displays the

current street name.

The upper area of the map displays

signpost information you must fol-

low:

Route Information

The right area of the map displays the

following route information:

Note:

This information can only be dis-

played if it is part of the map ma-

terial.

–

: This symbol represents

stages. All information below it

refers to the next destination.

: Estimated time of ar-

rival.

: Estimated remaining

travel time.

: Remaining kilometres/

miles to destination.

Speed Limit

The right area of the map displays any

speed limit that may apply:

–

Note:

This information can only be dis-

played if it is part of the map ma-

terial.

Map Display during Destination Guidance

Caution

The information on the digital road

maps may be incorrect due to short-

term changes (construction, etc.)!

The trafﬁc situation and the local

signpost information have priority

over the information of the Lucca.

Map Information

➜ Touch Map information.

➜ Activate the Info bar entry so that

the compass and your current

speed are displayed on the map in

the lower right border.

Showing Additional Map

Information

You can use the Lucca to deﬁne which

additional information is displayed on

the map. All settings are performed

in the Settings menu.

The additional information on the

map is activated as follows:

➜ Open the Settings menu by touch-

ing the Settings button in the Nav-

igation menu or by brieﬂy touching

any position on the map and then

selecting the Settings entry.

➜ Activate the Point of interest en-

try so that all points of interest

are displayed on the map (default

setting).

➜ Activate the Street names 2D en-

try so that the street names are

displayed on the map (only pos-

sible in 2-D display).

Map Display during Destination Guidance

button to return

➜ Touch the

to the Settings menu.

Route Information

➜ Select the Route information set-

ting with the button.

➜ Touch the

button to return

to the Settings menu.

Signpost Information

➜ Touch Signpost information.

The Signpost information menu dis-

plays.

➜ Touch the Show trafﬁc signs but-

ton to activate or deactivate the

display of the exit signs.

➜ Touch the

button to return

➜ Switch the desired route informa-

tion on or off with the correspond-

ing buttons.

to the Settings menu.

Speed

The corresponding information for

the next stage (upper area) and

the complete route (lower area) is

displayed on the map.

➜ Touch Speed limit.

The Speed limit menu displays.

Map Display during Destination Guidance

➜ Touch the Warning in urban areas

button to change the value or to

set it to Never.

• Warning outside of towns:

– The Warning outside urban ar-

eas button shows the level of

the speed-reading at which you

are audibly warned outside of

build-up areas.

➜ Touch the Warning outside urban

areas button to change the value

or to set it to Never.

In the Speed limit menu you can de-

ﬁne whether speed limits should be

displayed during the navigation and

whether you should be warned au-

dibly if you are exceeding the speed

limit.

Warning

•

– Activate the Warning button to

receive an audible warning.

➜ Touch the OK button to save your

• Display signs

settings.

Your settings are accepted and

displayed on the map.

➜ Touch the Show trafﬁc signs but-

ton to change between the modes

Show trafﬁc signs: Always, On

speeding only or Never.

• Warning in a town:

– The Warning in urban areas

button shows the level of the

speed-reading at which you are

audibly warned inside of build-

up areas.

Additional Functions during Navigation

➜ Touch the Interim destination

Additional Functions

during Navigation

button.

The Destination entry menu dis-

plays.

➜ Enter the place of destination as

described in "Entering a Destina-

tion".

The following functions can be used

during a navigation:

Inserting an interim destination

Skipping a stage

•

➜ Touch the Set as route point but-

Blocking route segments

•

ton.

Inserting an Interim

Destination

The route is recalculated and the

deﬁned interim destination is se-

lected as the next route point.

During the navigation, you can insert

a new interim destination at any time.

The route is then recalculated so that

this interim destination can be ap-

proached as the next destination. Af-

ter reaching the interim destination,

all remaining places of destination

are selected.

Note:

You can also select the interim

destination directly from the map

as described in the section "Copy-

ing a Destination from the Map".

Next, touch Interim destination.

An interim destination is created as

follows:

Prerequisite:

You are in the map display during

a navigation.

•

➜ Brieﬂy touch any position on the

map.

Additional Functions during Navigation

Blocking route segments

Approaching the Next

Destination

This function is only available during

a navigation on a route with at least

one interim point.

Use this function if you want to skip

the next route point.

➜ Touch the Next destination but-

ton to approach the next to one

route point.

Blocking route

segments

Manual Blocking

You have the option of manually

blocking a route segment located on

your route to evade the road section

blocked for navigation. After a manual

blocking, the route is recalculated.

Supposing that you are on the mo-

torways and hear a trafﬁc announce-

ment on the radio about a trafﬁc jam

of 5 km on your route. In this case,

you can use a manual blocking of the

section to evade the trafﬁc jam.

The route is recalculated so that

the next to one route point can be

approached as the next destina-

tion.

The manual blocking is only applica-

ble to the current navigation and is no

longer available for a new navigation

or after a restart of the program.

Route segments are blocked as fol-

lows:

Prerequisite:

You are in the map display during

a navigation.

•

Blocking route segments

➜ Brieﬂy touch any position on the

The road blocking is cancelled and

the navigation uses once again the

original calculated route.

map.

➜ Select the Block road entry.

The Block road menu displays.

➜ Enter the number of kilometres,

starting with your current posi-

tion, which you want to block.

The route is recalculated and the

blocked route segment is evaded.

The blocked segment is marked in

red.

Unblocking

➜ Brieﬂy touch any position on the

map.

➜ Select the Block road entry.

Conﬁguring Lucca

➜ In the Navigation menu, touch the

Settings menu to conﬁgure the

Lucca.

➜ If you made changes to the set-

tings, you can touch the OK button

of the Settings menu to accept the

changes you made.

Conﬁguring Lucca/

Basic Settings

Settings

You can perform settings in the Lucca

for the following areas:

• Language

• Home address

• Map information

• Route information

• Routing options

• Route planning

• Signpost information

• Speed limit

➜ Touch the

button to exit the

Settings menu without saving the

changes.

Language

In the Language menu, you can select

your preferred for the menus and

voice output.

➜ Touch the Language button.

The current language is displayed.

➜ Touch the Set language.

The language list displays.

• Auto mode

• Time zone

• Format

• Representation

• Voice command

• Factory settings

• Touchscreen

➜ Touch on your preferred language

to select the language.

• Product information

Conﬁguring Lucca

Home Address

• Street names 2D

In the Home address menu, you can

store your home address so that you

can quickly navigate home from any

location.

– If you activate the entry, the

map displays all the street

names.

Route Information

In the Route information menu, you

can perform the following settings:

➜ Touch the Enter your home ad-

dress button.

➜ Touch the Address button and

enter your home address in the

"Entering a destination address"

section.

• Dist. to ﬁnal dest., Time to ﬁnal

dest., ETA at ﬁnal dest.

– If you activate the entries, the

map displays the estimated

time of arrival, the estimated

travel time and the remaining

kilometres/miles to the desti-

nation point.

➜ Touch the Set as home address

button.

The address is copied into the

Home address menu.

Map Information

In the Map information menu, you can

perform the following settings:

• Dist. to next dest., Time to next

dest., ETA at next dest.

– If you activate the entries, the

map displays the estimated

time of arrival, the estimated

travel time and the remaining

kilometres/miles to the next

stage destination.

• Info bar

– If you activate the entry, the

compass, altitude and current

speed are displayed on the

map in the lower right border.

•

Points of interest

– If you activate the entry, the

map displays all the points of

interest.

Conﬁguring Lucca

Note:

stage destination by brieﬂy touching

any position on the map and select-

ing the Next option.

This information is only displayed

if you navigate to several loca-

tions.

Signpost Information

In the Signpost information menu,

you can specify whether signpost

information, which you are to follow,

should be displayed during the navi-

gation or not.

➜ Touch the Show trafﬁc signs but-

ton to activate or deactivate the

display.

Routing Options

In the Routing options menu, you can

deﬁne the speed proﬁle of your ve-

hicle, select the type of routing and

exclude certain streets from usage.

The route options remain valid for

each destination guidance until the

next change of the route options. For

further details, please read the chap-

ter "Specifying Route Options".

Note:

This information can only be dis-

played if it is part of the map ma-

terial.

Route Planning

In the Itinerary menu, you can deﬁne

whether the calculation for the next

stage should automatically be per-

formed after reaching a stage.

If the automatic calculation is activat-

ed, the route to the next stage des-

tination is automatically calculated

upon reaching a stage.

Speed Limit

In the Speed limit menu you can de-

ﬁne whether speed limits should be

displayed during the navigation and

whether you should be warned au-

dibly if you are exceeding the speed

limit.

If the automatic calculation is deac-

tivated, you can navigate to the next

Conﬁguring Lucca

Display signs

• Warning

•

➜ Touch the Show trafﬁc signs but-

ton to change between the follow-

ing modes:

➜ Activate the Warning button to re-

ceive an audible warning.

Note:

– Show trafﬁc signs: Always,

– Show trafﬁc signs: On speed-

ing only or

This information can only be dis-

played if it is part of the map ma-

terial.

– Show trafﬁc signs: Never

• Warning in a town

Caution:

– The Warning in urban areas

button shows the level of the

speed-reading at which you are

audibly warned inside of build-

up areas.

The information in the map material

may be incorrect due to short-term

changes (construction, etc.)!

The trafﬁc situation and the local

signpost information have priority

over the information of the naviga-

tion system.

➜ Touch the Warning in urban areas

button to change the value or to

set it to Never.

• Warning outside of towns

Auto Mode

In the Auto mode menu, you can per-

form the following settings:

– The Warning in rural areas

button shows the level of the

speed-reading at which you

are audibly warned outside of

build-up areas.

• Begin with

– Select whether the map should

be displayed in 3-D view or in

2-D view by default.

➜ Touch the Warning in rural areas

button to change the value or to

set it to Never.

Conﬁguring Lucca

Time Zone

•

3D auto zoom

In the Time zone menu, you can set

the time zone that is valid for your

position. This setting is important for

the correct calculation of estimated

arrival times.

– Select whether you desire auto

zoom or no auto zoom as de-

fault in 3-D view during a navi-

gation.

•

2D auto zoom

• Time zone

– Select whether you desire

low auto zoom, standard auto

zoom, high auto zoom or no

auto zoom during a navigation

with 2-D view.

➜ Touch this ﬁeld to set the time

zone valid for your position.

• Daylight saving time

➜ Touch this ﬁeld to toggle between

daylight savings time (button with

check mark) and winter time (but-

ton without check mark).

Note:

For 2-D and 3-D auto zoom, the

zoom depth is changed in refer-

ence to your speed: If you travel

slowly, the scale becomes smaller.

If you travel faster, the scale be-

comes larger. The deeper the auto

zoom, the smaller the scale of the

map.

Note:

If the time is changed at your loca-

tion or if you drive into a different

time zone, you must adjust the

corresponding settings.

Format

•

2D-view

In the Format menu you can specify

which units of measure should be

used for times and distances and the

language to be used for the menus

and voice output of the Lucca.

– Select whether the map should

be oriented to the north or in

driving direction by default dur-

ing a navigation with 2-D view.

Conﬁguring Lucca

➜ Touch the Voice command but-

Time

•

ton.

➜ Touch this ﬁeld to toggle between

The Voice command menu dis-

plays.

12-hour and 24-hour display.

Distance

➜ Touch this ﬁeld to toggle between

the display in kilometres and

miles.

•

➜ Touch the Radio-mute button to

mute the voice commands.

➜ Touch the OK button to conﬁrm.

Factory Settings

Representation

In the Factory settings menu, you can

reset the navigation software to the

factory settings.

In the Representation menu, you can

set the brightness for day and night

mode.

➜ Touch the Factory settings but-

➜ Touch the Representation but-

ton.

A conﬁrmation is displayed.

The Representation menu dis-

plays.

➜ Conﬁrm the reset to the factory

settings by touching OK.

To avoid resetting the device,

➜ Touch the Brightness Day button

to select the brightness value for

day mode.

➜ touch the

button.

➜ Touch the Brightness Night but-

ton to select the brightness value

for night mode.

Touchscreen

In the Touchscreen menu, you can rec-

alibrate (align) the touchscreen if it

responds imprecisely to touches.

Voice command

In the Voice command menu, you can

mute voice command during naviga-

tion.

➜ Touch the Start calibration button

and follow the instructions on the

display.

Conﬁguring Lucca

GPS Mode of Operation

Product Information

GPS Mode of Operation

➜ Touch this ﬁeld to display the ver-

sion of the map being used and

the version of the navigation soft-

ware.

The Global Positioning System (GPS)

was developed in the 70s by the US

military.

GPS is based on a total of 24 satel-

lites that are orbiting the earth and

sending out signals. The GPS receiver

receives these signals and calculates

its distance to the individual satel-

lites using the propagation time of

the signals. This information is then

used to determine its current geo-

graphical position.

The positioning requires signals from

at least three satellites, and starting

with the fourth one it is also possible

to determine the altitude above sea

level. The positioning is carried out

with an accuracy to 3 metres.

Navigation with GPS. The provided

maps also contain the geographical

coordinates of the displayed points

of interest, streets and towns. This

allows the navigation system to cal-

culate a route from a starting point to

a place of destination.

GPS Mode of Operation

MP3 Mode

If the Lucca receives the signals from

at least 3 satellites, it can determine

its position and display it on the map.

This position can then be used as the

starting point for a route calculation.

Since a positioning and position dis-

play is carried out once every second,

you can view your movement on the

map.

MP3 Mode

The Lucca can be used to play MP3

audio ﬁles in MP3 format from SD

cards. The playback utilises either the

internal loudspeaker or headphones

connected via the headphone jack.

Preparing the SD Card

The Lucca can play MP3 ﬁles from SD

cards. The SD cards should be for-

matted using either the FAT 32 or FAT

16 format.

The MP3 ﬁles can be stored either at

the top directory level or in folders

on the SD card. You can also mix MP3

ﬁles and other ﬁles (e.g. .jpg ﬁles) in

one folder. In MP3 mode, all other

data are ignored by the Lucca and

only MP3 ﬁles are being played.

Inserting the SD Card

The SD card slot is located on the

right side of the Lucca.

MP3 Mode

➜ Push the SD card into the SD card

slot according to the marking on

the slot until the card engages.

Selecting MP3 Mode

If you are in a different operating

mode,

➜ Press the Menu button longer

than 3 seconds.

The main menu displays.

Starting Playback

If you selected the MP3 button, the

previously played MP3 will be played

automatically.

Selecting a MP3 ﬁle

➜ In the MP3 menu, touch the File

button.

The MP3 list menu is displayed.

➜ Touch the Music Player button.

The MP3 menu displays:

MP3 Mode

Repeated Play (Repeat)

You can repeatedly play the current

played ﬁle.

In the MP3 menu, touch the Re-

➜

peat button.

The current played MP3 ﬁle will

repeatedly play.

If you press again the Repeat but-

ton, the repeat function will be

cancelled.

➜ Touch the ﬁle to which you want to

listen by using the arrows to scroll

up and down in the list.

The MP3 menu is displayed again

and the selected MP3 ﬁle starts

playing.

Playback the MP3 File

➜ To select the next ﬁle in the MP3

list, touch the

button in the

MP3 menu.

➜ To select the previous ﬁle in the

MP3 list, touch the

the MP3 menu.

The next or previous track starts

playing.

button in

Quitting Playback

➜ To quit the playback, touch the

Stop button in the MP3 menu.

Playback is stopped.

MP3 Mode

Picture Viewer Mode

Removing the SD Card

Picture Viewer Mode

➜ You quit the MP3 mode by touch-

The Lucca can also be used to view

pictures that are stored on the in-

serted SD card. For this purpose,

the pictures must be stored in the

.jpg or .bmp format on the card. You

can also mix JPG ﬁles and other data

(e.g. MP3 ﬁles) in one folder. In the

Picture Viewer mode, only the .jpg

(.bmp) ﬁles in a folder are displayed

and others are ignored.

ing the

menu.

button in the Mp3

➜ Carefully push on the SD card in

the slot until it disengages.

The SD card is ejected a little bit

and can be removed.

Starting the Picture Viewer

If you are in a different operating

mode,

➜ Press the Menu button longer

than 3 seconds.

The main menu displays.

Picture Viewer Mode

Selecting a Picture ﬁle

To select the next picture in the

ﬁle list, touch the next ﬁle by us-

ing the arrows to scroll down on

the Pictures Viewer menu.

➜

To select the previous picture in

the ﬁle list, touch the previous ﬁle

by using the arrows to scroll up

on the Pictures Viewer menu.

➜

The next or previous picture is

displayed.

➜ Touch the Picture Viewer button.

The Pictures viewer menu displays.

Starting the Slide Show

Touch the Slide button to

start the slide show with all

the pictures in the ﬁle list.

➜

The ﬁrst picture in the picture ﬁle

recognised by the Lucca is dis-

played.

The picture silde is converted at 3

seconds intervals.

Picture Viewer Mode

Starting the Full Screen

Touch the Full button to view the

full screen with all the pictures in

the ﬁle list.

➜

At the last slide the Question No-

tice where the slide show is ﬁn-

ished will appear.

On the full screen mode, you can

move to the previous or next ﬁle

by using the arrow icon.

Picture Viewer Mode

Installing Street Maps

The road map of the country in which

the Lucca was purchased is prein-

stalled in the memory of the Lucca.

The preinstalled road map is also

contained on the enclosed CD/DVD

for a future restore.

Dependend on the purchase version

the CD/DVD contains also other road

maps.

To install a road map from the CD/

DVD, copy it from the CD/DVD to an

SD card or use the USB-port and in-

stall the road map as described be-

low.

Removing the SD Card

➜ You quit the Picture Viewer mode

by touching the

button in

the Pictures viewer menu.

➜ Carefully push on the SD card in

➜ Switch on the Lucca by pressing

the Power button for a few sec-

onds.

➜ Insert the new memory card into

the SD card slot according to the

marking on the card slot.

the slot until it disengages.

The SD card is ejected a little bit

and can be removed.

➜ Connect the Lucca via the USB-

port to your PC.

Installing Street Maps

Technical Data

➜ Switch off and on the Lucca again

by pressing the Power button for

a few seconds.

Technical Data

OS:

Microsoft Win CE 5.0

A dialog menu displays. Follow

the instruction to install the street

map.

CPU:

Atlas II Dual Core Proces-

sor (300MHz)

Main Memory:

RAM(64MB) DRAM

ROM(512MB) NAND Flash

Unit Size(mm):

115(W) x 80(L) x 25(H)

Unit Weight(g):

Determine whether to load the con-

tent of the road map into the main

memory of the device or whether the

Lucca should load the data from the

SD card during the navigation.

Note:

approx. 190

If you load the new road map into

the main memory, the previously

installed road map is overwritten.

GPS:

QuickFind Technology on

Centrality Dual Core Proc-

essor 20 channel

➜ Touch the OK button.

Battery: Rechargeable Battery

(Li-lon 1230mA)

Sound: Max 1.5W Speaker built-in

The selected road map is activated

and the Navigation menu displays.

Removing the SD Card

➜ Carefully push on the SD card in

SD Card: SD Card slot for external

storage (max. 2GB)

Operating temperature:

-20°C ... 60°C

Storage temperature:

-30°C ... 70°C

the slot until it disengages.

The SD card is ejected a little bit

and can be removed.

Disposal of old unit

Service

Disposal of old unit

Service

(EU countries only)

In some countries Blaupunkt offers

a speciﬁc repair service including a

pick-up service.

Do not dispose of your old unit in

the household trash!

In case your Lucca has to be sent to

Blaupunkt for service you can order

a pick-up service for your device on

the internet.

Refer to www.blaupunkt.com to

check if this service is available in

your country.

Please use the return and collection

systems available to dispose of the

old unit.

Warranty

FAQ

Warranty

Fault Removal /

Frequently Asked

Questions FAQ

We provide a manufacturer's warran-

ty for our products purchased within

the European Union. For devices pur-

chased outside the European Union,

the warranty terms issued by our re-

spective responsible domestic agen-

cy are valid.

Why does the Lucca require GPS re-

ception?

The system must know where it is lo-

cated or where it is moving. This is

accomplished with the help of GPS

satellites. Without GPS reception,

navigating is not possible.

The warranty terms can be called up

under www.blaupunkt.com/de or re-

quested directly from:

Blaupunkt GmbH, Hotline

Robert-Bosch-Str. 200

How can I listen to MP3 music?

With the help of a PC, the MP3 ﬁles

are stored on the card which is then

inserted in the SD card slot of the

Lucca. In conjunction with the cradle,

they can also be played over the car

sound system.

D-31139 Hildesheim

Can the navigation software be

changed?

Yes. Simply insert the card in the SD

card slot or use the USB-port and you

can immediately navigate with the

new data.

FAQ

The internal navigation software re-

mains intact and you can use either

the internal navigation software or

the one on the SD card for the selec-

tion.

The loading process lasts approx. 15

minutes and is dependent upon the

data size. For this reason, the indi-

vidual countries are delivered as com-

pletely manufactured maps.

The data do not have to be loaded

from the SD card into the internal

memory.

Is the old internal navigation soft-

ware overwritten with a change of

the navigation software?

No, the system can navigate with

the internal as well as the external

data. If the external data (SD card)

are used for navigation, the SD slot

for the MP3 playback for the Lucca is

unavailable during this time.

Is it possible to play WMA ﬁles with

DRM protection?

The playback of WMA ﬁles with Dig-

ital Rights Management protection

(WMA-DRM) is not possible since the

license key is not transferred during

the transfer of the WMA ﬁle from the

PC.

The playback of WMA ﬁles without

DRM protection is, of course, possi-

ble.

Can the internal navigation software

be changed?

Yes. The data can be loaded in the

internal memory. For this purpose,

insert the SD card in the SD card slot

or connect the Lucca via the USB-port

with your PC and initiate the loading

process via menu.

Which cards can I use?

Commercial SD or MMC cards.

Which data format is required for an

SD card?

FAT 16/32.

How long does the loading take from

the SD card to the internal memo-

ry?

Country:

Germany

Phone:

Fax:/www:

(D)

0180-5000225

05121-49 4002

www.blaupunkt.com

Austria

(A)

(B)

01-610 39 0

02-525 5444

44-898 360

01-610 39 391

02-525 5263

44-898 644

09-435 99236

01-4010 7320

01-89583 8394

210 94 12 711

01-46 66 706

02-369 62464

40 2085

Belgium

Denmark

Finland

France

Great Britain

Greece

Ireland

Italy

Luxembourg

Netherlands

Norway

(DK)

(FIN)

(F)

(GB)

(GR)

(IRL)

(I)

(L)

(NL)

(N)

09-435 991

01-4010 7007

01-89583 8880

210 94 27 337

01-46 66 700

02-369 62331

40 4078

0800 400 1010

66-817 000

0800 400 1040

66-817 157

Portugal

Spain

(P)

(E)

(S)

(CH)

(CZ)

(H)

(PL)

(TR)

2185 00144

902 52 77 70

08-7501850

01-8471644

02-6130 0446

76 511 803

2185 00165

91 410 4078

08-7501810

01-8471650

02-6130 0514

76 511 809

Sweden

Switzerland

Czech. Rep.

Hungary

Poland

0800-118922

0212-335 06 71

022-8771260

0212-346 00 40

Turkey

Blaupunkt GmbH,

Robert-Bosch-Straße 200,

D-31139 Hildesheim

10/06 CM-AS/SCS1 (GB)

8 622 405 254

Mobile Navigation

TravelPilot Lucca 3.3

Die Lucca hat eine neue Ein-/Ausschaltlogik!

Es gibt zwei Ausschaltzustände der Lucca:

1) Den Ruhestand (Kurzdruck auf die Schaltﬂäche Power).

2) Das vollständige Ausschalten aller Funktionen (Langdruck länger als

3 Sekunden auf die Schaltﬂäche Power).

Zum Einschalten drücken Sie die Schaltﬂäche Power kurz, wenn Sie die

Lucca aus dem Ruhestand wecken möchten. Wenn das Gerät vollständig

ausgeschaltet ist, drücken Sie die Schaltﬂäche Power länger als 4 Sekunden.

Wir wünschen Ihnen allzeit gute Fahrt - Ihr Blaupunkt Service Team

The Lucca features a new switch-on/switch-off logic!

The Lucca features to switch-off states:

1) The idle state (short press on the Power button).

2) Complete switch-off of all functions (long press for longer than 3 seconds

on the Power button).

To switch it on, brieﬂy press the Power button to return the Lucca from the

idle state. If the device is completely switched off, press the Power button

for longer than 4 seconds.

Have a safe trip at all times - Your Blaupunkt Service Team

Le Lucca répond à une nouvelle logique de mise en marche et d'arrêt !

Le Lucca peut prendre deux états d'arrêt différents :

1) Etat de repos (pression brève sur le bouton Power).

2) Arrêt complet de toutes les fonctions (pression prolongée, plus de

3 secondes, sur le bouton Power).

Si vous souhaitez sortir le Lucca de l'état de repos et le mettre en marche,

appuyez brièvement sur le bouton Power. Si l'appareil avait été complète-

ment arrêté, appuyez sur le bouton Power pendant plus de 4 secondes.

En vous souhaitant toujours bonne route - votre Service Team Blaupunkt

Il Lucca ha una nuova logica di accensione/spegnimento.

Per il Lucca sono disponibili due modalità di spegnimento:

1) Stand-by (breve pressione del pulsante Power).

2) Completa disattivazione di tutte le funzioni (pressione di durata superiore

a 3 secondi del pulsante Power).

Per l'accensione premere brevemente il pulsante Power, se si intende

riattivare il Lucca dallo stato di stand-by. Premere il pulsante Power per

più di 4 secondi, se l'apparecchio è completamente spento.

Vi auguriamo buon viaggio - Il vostro Blaupunkt Service Team

8 622 405 423

De Lucca is voorzien van een nieuwe aan-/uitschakellogica!

Er zijn twee uitschakeltoestanden van de Lucca:

1) De ruststand (de Power knop kort indrukken).

2) Het volledig uitschakelen van alle functies (langer dan 3 seconden op de

Power knop drukken).

Om het apparaat in te schakelen drukt u kort op de Power knop, wanneer u

de Lucca weer uit de ruststand wilt 'wekken'. Wanneer het apparaat volledig

is uitgeschakeld, druk dan langer dan 4 seconden op de Power knop.

Wij wensen u altijd een goede reis - Uw Blaupunkt Service Team

Lucca har en ny på-/avslagningslogik!

Lucca går att slå av på två olika sätt:

1) Viloläget (kort tryckning på skärmknappen Power).

2) Slå av alla funktioner (lång tryckning (mer än 3 sekunder) på

skärmknappen Power).

För att slå på trycker du kort på skärmknappen Power om du vill

väcka Lucca ur viloläget. När apparaten är helt avstängd trycker du

på skärmknappen Power längre än 4 sekunder.

Blaupunkt Service Team - alltid där för dig

¡El Lucca tiene una nueva lógica de conexión y desconexión!

Hay dos tipos de estado de desconexión:

1) El modo de reposo (pulsación breve del botón Power).

2) La desconexión completa de todas las funciones (pulsación durante

más de 3 segundos del botón Power).

Pulse brevemente el botón Power si desea que el Lucca abandone el modo

de reposo. Si el equipo está totalmente desconectado, pulse el botón Power

durante más de 4 segundos.

Su equipo de servicio Blaupunkt le desea un buen viaje.

O Lucca possui uma nova lógica de activação/desactivação!

Existem dois estados de desactivação do Lucca:

1) O estado de repouso (toque breve no botão Power).

2) A desactivação total de todas as funções (toque longo por mais

de 3 segundos no botão Power).

Para ligar, prima brevemente o botão Power, se pretender reactivar o Lucca

do estado de repouso. Se o aparelho estiver totalmente desligado, prima o

botão Power por mais de 4 segundos.

Desejamos-lhe uma viagem sempre agradável - a sua equipa do serviço

Blaupunkt

Lucca-navigationssystemet er udstyret med et logisk tænd/sluk-system!

Lucca-navigationssystemet har to sluktilstande:

1) Dvaletilstand (kort tryk på skærmknappen Power).

2) Fuldstændig deaktivering af alle funktioner (langt tryk i mere end

3 sekunder på skærmknappen Power).

Hvis du vil tænde for systemet, skal du trykke kort på skærmknappen Power,

hvis Lucca-navigationssystemet beﬁnder sig i dvaletilstand. Hvis systemet er

helt slukket, skal du trykke på skærmknappen Power i mere end 4 sekunder.

Vi ønsker dig god rejse. Hilsen dit Blaupunkt-serviceteam

Lucca har nye logiske funksjoner for å slå apparatet på og av!

Det ﬁnnes to forskjellige tilstander for avslått apparat:

1) Hvilemodus (kort trykk på knappen Power).

2) Alle funksjoner fullstendig avslått (langt trykk i mer enn 3 sekunder på

knappen Power).

For å slå på trykker du kort på knappen Power når du vil aktivere Lucca

fra hviletilstand. Når apparatet er fullstendig avslått trykker du på knappen

Power lenger enn 4 sekunder.

Vi ønsker deg en god reise. Hilsen ditt Blaupunkt serviceteam

Lucca-järjestelmässä on uusi kytkentä-/katkaisulogiikka!

Lucca-järjestelmällä on kaksi erilaista katkaisutilaa:

1) Lepotila (painikkeen Power lyhyt painallus).

2) Kaikkien toimintojen täydellinen sammuttaminen (painikkeen

Power pitkä, yli 3 sekuntia kestävä painallus).

Kun haluat herättää Lucca-järjestelmän lepotilasta, kytke laite päälle paina-

malla lyhyesti painiketta Power. Kun laite on kytketty kokonaan pois päältä,

paina painiketta Power yli 4 sekuntia.

Blaupunkt-palvelutiimi toivottaa sinulle hyvää ja turvallista ajomatkaa

Lucca'da yeni bir açma/kapatma sistemi mevcuttur!

Lucca'da iki kapatma durumu mevcuttur:

1) Hareketsiz durum (Power tuşuna butonuna basma).

2) Tüm fonksiyonları tamamen kapatma (Power butonuna 3 saniyeden fazla

uzun süre basma).

Lucca'yı hareketsiz durumdayken açmak için Power butonuna kısa süre ba-

sınız. Cihaz tamamen kapatılmış durumda ise Power butonuna 4 saniyeden

fazla basınız.

Size iyi sürüşler dileriz - Blaupunkt servis takımınız

A Lucca új be-és kikapcsoló logikával rendelkezik!

A Lucca két kikapcsolási állapottal felszerelt:

1) A nyugalmi állapot (rövid nyomás a Power) kapcsolómezőre.

2) Az összes funkció teljes kikapcsolása (a Power kapcsolófelületet

hosszabban, mint 3 másodperc lenyomva tartani).

Bekapcsoláskor nyomja meg a Power kapcsolófelületet röviden, ha a Lucca

készüléket a nyugalmi állapotból fel kívánná ébreszteni. Ha a készülék telje-

sen ki van kapcsolva, nyomja meg a Power kapcsolófelületet és tartsa

4 másodpercnél hosszabb ideig lenyomva.

Minden időben kellemes utazást kíván Önnek - az Ön Blaupunkt szerviz csapata.

Urządzenie Lucca posiada nowy układ logiczny włączania/wyłączania!

Istnieją dwa stany wyłączenia urządzenia Lucca:

1) Stan spoczynkowy (krótkie naciśnięcie pola wyboru Power).

2) Całkowite wyłączenie wszystkich funkcji (długie naciśnięcie na

ponad 3 sekundy pola wyboru Power).

Aby włączyć urządzenie Lucca, znajdujące się w stanie spoczynkowym, na-

ciśnij krótko pole wyboru Power. Gdy urządzenie jest całkowicie wyłączone,

naciśnij na ponad 4 sekundy pole wyboru Power.

Życzymy szerokiej drogi - Twój serwis Blaupunkt

Přístroj Lucca má nový způsob vypínání/zapínání!

Přístroj Lucca nabízí dva režimy vypínání:

1) klidový režim (krátké stisknutí tlačítka Power).

2) úplné vypnutí všech funkcí (dlouhé stisknutí tlačítka Power po dobu delší

než 3 sekundy).

Pro návrat přístroje Lucca z klidového režimu stiskněte krátce tlačítko Power. Po-

kud je přístroj zcela vypnutý, stiskněte tlačítko Power po dobu delší než 4 sekundy.

Přejeme vám šťastnou cestu - váš servisní team Blaupunkt

Prístroj Lucca má nový spôsob zapínania/vypínania!

Prístroj Lucca ponúka dva režimy vypínania:

1) Kľudový režim (krátké stlačenie tlačítka Power).

2) Úplné vypnutie všetkých funkcií (dlhé stlačenie tlačítka Power na čas

dlhší ako 3 sekundy).

Na návrat prístroja Lucca z kľudového režimu stlačte krátko tlačítko Power. Pokial

je prístroj celkom vypnutý, stlačte tlačítko Power na čas dlhší ako 4 sekundy.

Prajeme vám šťastnú cestu - váš servisný tím Blaupunkt

Το Lucca έχει μια νέα λογική ενεργοποίησης/απενεργοποίησης!

Υπάρχουν δύο καταστάσεις απενεργοποίησης του Lucca:

1) Η κατάσταση αδρανείας (σύντομο πάτημα στο κουμπί Power).

2) Η πλήρης απενεργοποίηση όλων των λειτουργιών (παρατεταμένο πάτημα

περισσότερο από 3 δευτερόλεπτα στο κουμπί Power).

Για την ενεργοποίηση πιέστε για λίγο το κουμπί Power, όταν θέλετε να επαναφέρε-

τε το Lucca από την κατάσταση αδρανείας. Εάν η συσκευή είναι πλήρως απενεργο-

ποιημένη, πιέστε το κουμπί Power περισσότερο από 4 δευτερόλεπτα.

Σας ευχόμαστε καλό δρόμο - το επιτελείο της Blaupunkt

Mobile Navigation

TravelPilot Lucca 3.3 CC

Beiliegendes Kartenmaterial (Backup CD-ROM)

Ihrer Lucca 3.3 CC liegt detailliertes Kartenmaterial zu den auf der Verpa-

ckung genannten Ländern (bzw. dem Land) bei. Entgegen den Angaben in

den Bedienungsanleitungen umfasst dies nicht Gesamt-Europa. Kartenmate-

rial anderer Länder Europas erhalten Sie im Fachhandel.

Enclosed map material (Backup CD-ROM)

Your Lucca 3.3 CC features detailed map material of the countries (or the

country) listed on the packaging. Contrary to the information in the oper-

ating instructions, it does not include all of Europe. Map material of other

countries of Europe is available at specialised dealers.

Données cartographiques jointes (CD-ROM de sauvegarde)

Des données cartographiques détaillées relatives au(x) pays mentionné(s)

sur l'emballage sont jointes à votre Lucca 3.3 CC. Contrairement à ce qui est

indiqué dans la notice d'utilisation, elles ne portent pas sur l'ensemble de

l'Europe. Vous pouvez vous procurer des données cartographiques relatives aux

autres pays d'Europe dans le commerce spécialisé.

Materiale cartograﬁco accluso (CD-ROM di backup)

Insieme al Lucca 3.3 CC viene fornito materiale cartograﬁco dettagliato rela-

tivo al/i Paese/i riportato/i sulla confezione. Contrariamente a quanto indi-

cato nelle istruzioni d’uso queste mappe non comprendono l'intera Europa.

Il materiale cartograﬁco relativo agli altri Stati europei può essere acquistato

separatamente presso rivenditori specializzati.

Meegeleverd kaartmateriaal (back-up CD-ROM)

Bij uw Lucca 3.3 CC wordt gedetailleerd kaartmateriaal meegeleverd van de

op de verpakking vermelde landen (resp. het land). In tegenstelling tot de

informatie in de gebruiksaanwijzing omvat dit materiaal niet geheel Europa.

Kaarten van andere Europese landen kunt u verkrijgen bij uw vakhandel.

Material cartográﬁco adjunto (copia de seguridad en CD-ROM)

Su Lucca 3.3 CC incorpora material cartográﬁco detallado para el/los

país(es) especiﬁcado(s) en el embalaje. A diferencia de lo indicado en el ma-

nual de instrucciones, esto no engloba a toda Europa. El material cartográﬁco

de otros países de Europa puede adquirirse en comercios especializados.

8 622 405 545

Mapas anexos (CD-ROM de segurança)

Juntamente com o seu Lucca 3.3 CC, recebe mapas pormenorizados dos

países (ou país) mencionados na embalagem. Contrariamente às indicações

nas instruções de serviço, eles não abrangem toda a Europa. Poderá adquirir

mapas de outros países europeus no comércio da especialidade.

Ekteki kart malzemesi (Backup CD-ROM)

Lucca 3.3 CC 'nizin detaylı kart malzemesi, adı geçen ülkelerin (veya ülkenin)

ambalajında ektedir. Kullanım kılavuzlarındaki verilere rağmen, bu bütün

Avrupa'yı kapsamaz. Avrupa'nın başka ülkelerinin kart malzemesini uzman

piyasadan edinebilirsiniz.

Advent Audiovox Car Video System ADV48 User Manual
AOSafety MT7H796 01 User Manual
Audiovox P 15 User Manual
Blaupunkt CR127 User Manual
Campbell Hausfeld DG471500CK User Manual
Crown Boiler BSI069 User Manual
Electrolux Thermetic 9CHG83397 User Manual
Ikelite MD255 User Manual
Infinity DMC 1000 User Manual
JVC GET0483 001A User Manual