Radio / Cassette
Augsburg C30
Boston C30
Dublin C30
Minnesota DJ30
Montreux C30
Ontario DJ30
Operating instructions
1
3
5
7
2
6
8
9
10 11 12
4
14
13
17
16
15
3
OPERATING ELEMENTS
1
button to unlock release
panel
(for the Boston C30, Dublin C30,
Montreux C30 and Ontario DJ30
only)
FMT button, selects the FM
memory levels, starts the Travel-
Store function
<
=
CD•C button, switches the
sound source between radio,
cassette and CD changer (if
connected)
AUDIO button, adjusts bass and
treble
2
LD, switches the Loudness func-
tion on/off
(for the Boston C30, Dublin C30,
Montreux C30 and Ontario DJ30
only)
FM button, selects the FM mem-
ory levels
(for the Augsburg C30 and the
Minnesota DJ30 only)
Volume control
>
?
Cursor buttons
MENU button, activates the
menu for the basic settings
, displays the time
1 - 5 buttons
TRAFFIC button, switches traffic
information standby on/off
@
A
3
4
ON button, switches the unit on/
off, mute
5
6
RDS button, switches the RDS
convenience features on/off,
selects display for variable text
M•L button, selects the MW and
LW wavebands
(for the Boston C30, Dublin C30,
Montreux C30 and Ontario DJ30
only)
TS button, starts the TravelStore
function
(for the Augsburg C30 and the
Minnesota DJ30 only)
7
8
9
:
;
Cassette eject
Cassette slot
FR button, fast rewind
FF button, fast forward
GEO button, adjusts balance
and fader
24
CONTENTS
Important information ............ 26 CD changer operation............ 38
Traffic safety .................................. 26 Starting CD changer operation ...... 38
Installation ..................................... 26 Selecting CDs ............................... 38
Accessories .................................. 26 Selecting tracks ............................ 38
Guarantee ..................................... 26 Audible fast forward/reverse
International telephone information .. 26 (CUE/REVIEW)............................. 38
Switching the display mode ........... 38
Repeating individual tracks or
entire CDs (REPEAT) .................... 38
Playing tracks in random order
(MIX) ............................................. 39
Stopping the MIX function ............. 39
Scanning all of the tracks on all
of the CDs (SCAN) ....................... 39
Adjusting Scantime........................ 39
Theft protection system ......... 27
Removable front panel ................... 27
Code theft protection .................... 28
Switching the car audio
system on/off......................... 29
Volume control....................... 30
Adjusting the power-on volume ...... 30
Mute ............................................. 31
Mute during telephone operation ... 31
Switching the beep tone on/off ...... 31
Clock ...................................... 40
Displaying the clock briefly ............ 40
Setting the time ............................. 40
Selecting the 12/24-hour time
display mode ................................. 40
Activating the clock for display
when the car audio system is
switched off................................... 40
Displaying the time briefly when
Radio operation...................... 32
Switching to the radio mode .......... 32
Special RDS functions (AF, REG) .. 32
Selecting wavebands/
memory banks ............................... 32
Tuning into radio stations ............... 33
Adjusting seek tuning sensitivity..... 33
Storing radio stations..................... 33
Recalling stored radio stations ....... 34
Program Type (PTY) ...................... 34
Interference-related treble cut
the car audio system is switched
off ................................................. 40
Adjusting the tone.................. 41
Adjusting the bass ......................... 41
Adjusting the treble ....................... 41
Switching Loudness on/off ............ 41
(HICUT) ........................................ 35
Selecting the display of variable
text ................................................ 35
Adjusting the balance and
Traffic information .................. 36
fader ....................................... 42
Adjusting the balance .................... 42
Adjusting the fader ........................ 42
Tape deck operation .............. 37
Starting tape deck operation.......... 37
Cassette eject ............................... 37
Changing cassette sides ............... 37
Fast forward/rewind ...................... 37
Traffic information during cassette
External audio sources .......... 42
Switching the AUX output on/off.... 42
Specifications ........................ 43
playback........................................ 37
25
IMPORTANT INFORMATION
Important information
Remote control unit
The optionally available RC 08 infrared
remote control unit allows you to con-
veniently operate the most important
system functions from the steering
wheel.
We are happy that you decided to pur-
chase a Blaupunkt car audio system
and hope that you will enjoy your new
sound system.
This instruction manual was designed
to help you use your new car audio sys-
tem in the optimum way. Please take
the time to read the instruction manual
carefully and make yourself familiar with
the audio equipment. Keep this manual
handy in your car for future reference.
Amplifiers
All Blaupunkt amplifiers can be used.
CD changers
The following CD changers can be con-
nected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be
connected with an adapter cable (Blau-
punkt no. 7 607 889 093).
Traffic safety
Traffic safety is always the top
priority. Do not attempt to operate
your car audio system unless the traf-
fic conditions permit. Familiarize
yourself with the equipment before
you start driving.
Always make sure that you are still
able to hear any warning signals
coming from outside the vehicle,
such as police or fire engine sirens,
at all times.
The Minnesota DJ30 and the Ontario
DJ30 both come included with the CDC
A 08 CD changer.
Guarantee
The scope of the guarantee is deter-
mined by the laws in the country where
the unit is purchased.
Regardless of the legal guarantee reg-
ulations, Blaupunkt affords a 12-month
guarantee.
If you have any questions about the
guarantee, please contact your author-
ised Blaupunkt dealer.Your cash regis-
ter receipt is a valid guarantee coupon.
As a result, please always select a
moderate volume for playing your car
audio system while you are driving.
Installation
If you would like to install your new car
stereo yourself or add other audio com-
ponents to the existing ones, then
please read the instructions on installa-
tion and connection at the end of this
manual carefully.
International telephone
information
If you have any questions on the oper-
ation of this equipment or require more
information, just give us a call!
You will find the international telephone
and fax numbers on the last page of this
manual.
Accessories
Use only Blaupunkt-approved accesso-
ries.
26
THEFT PROTECTION SYSTEM
G First pull the operating panel for-
ward and then slide it to the left to
remove it.
Theft protection system
Removable front panel
Your new car audio system (Boston
C30, Dublin C30, Montreux C30 and
Ontario DJ30) has been equipped with
a removable front panel (release pan-
el) to protect it against theft. Without this
operating panel, the equipment is use-
less to thieves.
Protect your car audio system against
theft and take the operating panel with
you each time you leave the vehicle.
Never leave the release panel in the car,
even if it is well hidden. The panel has
been designed so that it is easy to re-
move.
G When you remove the operating
panel, the car audio system will au-
tomatically switch off.
G All of the settings will remain
stored.
G A cassette tape inserted into the
car audio system will remain in
place.
Replacing the operating panel
G Slide the operating panel into the
guides from left to right.
G Press the left-hand side of the pan-
el onto the car audio system until it
locks into place.
Notes:
G Do not drop the release panel.
G Do not expose the release panel to
direct sunlight or other heat sourc-
es.
G Do not expose the release panel to
moisture.
G Store the release panel in the case
supplied.
Note:
Removing the operating panel
G While replacing the panel, be care-
ful not to press on the display.
G Press
The release panel will unlock.
1.
If the car audio system was on when
you removed the panel, it will automat-
ically switch back on using the same
settings when you replace it (radio, tape
deck or CD changer).
1
27
THEFT PROTECTION
Entering the code number
Code theft protection
To protect your car audio system against G Switch on the car audio system.
theft, it has been equipped with a four-
“CODE” and then “0000” will appear in
digit code number. This number has to
the display.
be entered each time the car audio sys-
G Press station key 1 @ repeatedly
tem is disconnected from its power sup-
ply.The code inquiry is not activated for
the car audio system at the factory, but
until the first digit of your code
number appears in the display.
you can activate it yourself.
You will find the code number in the
Radio Pass.
G Press station key 2 @ repeatedly
until the second digit of your code
number appears in the display.
G Press station key 3 @ repeatedly
until the third digit of your code
number appears in the display.
Note:
Do not leave the Radio Pass in your
vehicle!
G Press station key 4 @ repeatedly
until the fourth digit of your code
number appears in the display.
Activating/deactivating the code
G To switch the code on/off, proceed
as follows:
G When the correct code number ap-
G Press 4 to switch the car audio
pears in the display, press >.
system off.
Note:
G Press and hold down station keys
If you enter the code number incorrect-
ly three times in succession, a waiting
period of one hour will go into effect.
“WAIT 1 H” will appear in the display.
During this waiting period, the car au-
dio system must remain switched on.
1 and 4 @ at the same time.
G While holding down these keys,
press 4 to switch the car audio
system on.
G Continue to hold down the keys un-
til “BLAU” - “PUNKT” appears in
the display.
G Release the keys.
The coding has now been activated.
G To deactivate the code, follow ex-
actly the same steps. To ensure
that unauthorized persons do not
deactivate the code, you will be re-
quired to enter the code to finish
the process.
28
THEFT PROTECTION
SWITCHING ON/OFF
Activating/deactivating the LED
code
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
To visibly indicate that the Augsburg C30
and the Minnesota DJ30 are equipped
with theft protection, you can activate
the code LED. The code LED will flash
Switching the car audio system on/
in key 4 when the car audio system is off with the ignition
switched off.
If the car audio system has been con-
nected to your vehicle ignition, it is pos-
sible to switch it on and off with the igni-
tion.
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“LED” appears in the display.
“OFF” or “ON” will appear next to
LED in the display.
You can also switch the car audio sys-
tem on when the ignition is switched off.
G Press down and hold 4 until the
car audio system switches on.
G To switch the LED on or off, press
or >.
Note:
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
G Once you have completed your
settings, press MENU ?.
Switching the car audio system on/
off with the removable front panel
(for the Boston C30, Dublin C30,
Montreux C30 and Ontario DJ30 only)
G Remove the release panel.
The car audio system will switch off.
G Replace the release panel.
The car audio system will switch on
again.The last settings used (radio, tape
deck or CD changer) will be activated.
29
SWITCHING ON/OFF
VOLUME CONTROL
Switching the car audio system on/
off by pressing 4
Volume control
The car audio system volume can be
adjusted to levels from 0 (off) to 66 (max-
imum).
G Press 4 to switch the car audio
system on.
G Press 4 for longer than two sec-
onds to switch the car audio sys-
tem off again.
G To increase the volume, turn the
volume control knob 3 to the
right.
The system will then switch off.
G To decrease the volume, turn the
volume control knob 3 to the left.
Switching the car audio system on
by inserting a cassette tape
Adjusting the power-on volume
If the system is switched off and there
is no cassette in the tape deck,
It is possible to adjust the volume at
which the car audio system switches on.
G insert a cassette into the tape deck
with the open side facing towards
the right until you hear it click into
place. Do not use force.
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“ON VOL” appears in the display.
The audio system will switch on. Tape
playback will begin.
G Press
> to adjust the vol-
ume.
If you adjust this setting to “0”, the car
audio system will switch on at the vol-
ume used before it was switched off.
Warning of serious injury
If the power-on volume is set to the
maximum level, it may be extremely
loud when the car audio system is
switched on.
If the power-on volume is set to 0 and
the car audio system was played at
maximum volume before it was
switched off, it may be extremely loud
when the car audio system is
switched back on. This could result
in serious injury to your ears!
G Once you have selected the de-
sired settings, press MENU ?
twice.
30
VOLUME CONTROL
Mute
Switching the beep tone on/off
You can reduce the volume of the car For a number of functions you will hear
audio system immediately (mute).
a beep if you press a key for longer than
two seconds, e.g. if you want to store a
radio station on a station preset.
G Press 4 briefly.
“MUTE” will appear in the display.
G Press MENU ?.
Selecting the mute level
“MENU” will appear in the display.
It is possible to select the mute level.
G Press or > repeatedly until
“BEEP” appears in the display.
“ON” or “OFF” will appear next to
“BEEP” in the display.
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
G To switch this function on or off,
“MUTE LVL” appears in the display.
press or >.
G Press
> to select the mute
G Once you have adjusted the set-
level.
tings, press MENU ?.
G Once you have made your selec-
tion, press MENU ? twice.
Mute during telephone
operation
If your car audio system is equipped with
a mobile telephone, it will automatically
switch to mute when you use the phone.
This will not work unless the mobile
phone is connected to the car audio
system as described in the installation
instructions.
If a traffic announcement is received
during a phone call and traffic informa-
tion priority has been activated, you will
hear the traffic announcement.For more
information, refer to the section on “Traf-
fic information”.
31
RADIO OPERATION
Radio operation
Note:
It is necessary to activate/deactivate
REG in the menu.
This car audio system has been
equipped with an RDS radio receiver.
Along with their regular station program-
ming, many FM radio stations now
transmit the RDS signal, which contains
such other information as the station
name and the program type (PTY).
As soon as the car audio system receiv-
er detects the station name, it will ap-
pear in the display. It is also possible to
display the program type. For more in-
formation, refer to the section on “Pro-
gram Type (PTY)”.
Switching REG on/off
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“REG” appears in the display.
“OFF” or “ON” will appear next to
“REG”.
G Press or > to switch REG off
or on.
G Once you have completed your
Switching to the radio mode
settings, press MENU ?.
If you are currently using the tape deck
or CD changer,
Switching RDS functions on/off
G To take advantage of the RDS
functions for AF and REG, press
RDS 5.
G press CD•C < repeatedly until
“RADIO” appears in the display.
Special RDS functions (AF, REG)
When the RDS functions have been
activated, RDS will light up in the dis-
play.
The special RDS functions for AF (Al-
ternate Frequency) and REG (Region-
al) enhance the performance of your car
audio system.
Selecting wavebands/memory
banks
G AF. If this RDS function is activat-
ed, the car audio system continu-
ously searches in the background
for the frequency with the best re-
ception for the station you have
tuned into.
Using this car audio system, you can
tune into radio stations on the FM, MW
and LW (AM) wavebands (MW and LW
are not available for the Augsburg C30
and the Minnesota DJ30). There are
three memory banks for the FM wave-
band and one memory bank each for
MW and LW.You can store five stations
in each of these memory banks.
G REG. A number of radio stations
broadcast different regional pro-
gramming at different times of the
day. Use REG to prevent your car
audio system from tuning into alter-
nate frequencies which might have
different programming.
Selecting the FM memory level
G To switch between the FM memory
levels, press FMT or FM 2.
32
RADIO OPERATION
before already. To do this, start the
TravelStore function.
Selecting the MW or LW memory
levels
G To switch between the MW and LW
memory levels, press M•L 6 (not
available for the Augsburg C30 and
the Minnesota DJ30).
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
G Press MENU ?.
“MENU” will appear in the display.
Automatic seek tuning
G Press or > repeatedly until
Press or >.
“SENS” appears in the display.
The radio will tune into the next availa-
ble station within reception range.
The currently selected setting will ap-
pear next to “SENS”. “SENS HI6” indi-
cates the highest level of sensitivity,
“SENS LO1” the lowest. If you select
“SENS LO”, lo will light up in the dis-
play.
Manual station selection
You can also tune into radio stations
manually.
Press or >.
G Press
sensitivity.
> to select the desired
Note:
You cannot use manual tuning unless
the RDS function and the PTY function
are deactivated.
G Once you have made your selec-
tion, press MENU ?.
Storing radio stations
Paging through the broadcasting
network (for FM only)
Storing radio stations manually
If a radio broadcasting network has
more than one station, you can page
through the “station network”.
G Select the desired memory bank
FM1, FM2, FMT or either MW or
LW (MW and LW are not available
for the Augsburg C30 and the Min-
nesota DJ30).
G Press or > to tune into the
next station in the network.
Note:
G Tune the radio into the desired sta-
To take advantage of this function, you
must have activated the RDS functions
and deactivated the PTY function.
tion.
G Press and hold down one of the
station preset buttons 1 to 5 @ on
which you want to store the radio
station for longer than two sec-
onds.
It is only possible to tune into those sta-
tions which have been received once
33
RADIO OPERATION
These program types can include:
Storing radio stations automatically
(TravelStore)
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
You can automatically store the five ra-
dio stations with the strongest reception
in your current reception area (for FM
only). These stations will be stored in
the FMT memory bank.
CLASSICS
Using the PTY function, you can select
the radio station according to the type
of program being broadcast.
Note:
As soon as the radio registers a radio
station broadcasting the program type
selected, it will automatically switch from
the station playing or from the tape deck
or CD changer mode to that station.
Any stations stored previously in the
memory bank will be deleted.
G Press and hold down FMT 2 for
longer than two seconds or press
TS 6 briefly (for the Augsburg
C30 and the Minnesota DJ30 only).
Switching PTY on/off
The storing process will begin. G Press MENU ?.
“T-STORE” will appear in the display.
“MENU” will appear in the display.
After the stations have been stored, the
radio will automatically begin to play the
station stored on preset button 1 for the
FMT memory bank.
G Press or > repeatedly until
“PTY ON” or “PTY OFF” appears in
the display.
G Press or > to switch this
Recalling stored radio stations
function either on or off.
G Select the desired station memory
G Once you have made the desired
bank or waveband.
setting, press MENU ?.
G Press the station button 1 to 5 @
on which you have stored the de-
sired radio station.
Selecting the program type and
starting seek tuning
G Press or >.
The currently selected program type will
appear in the display.
Program Type (PTY)
In addition to the radio station name, a
number of FM stations transmit infor-
mation on the type of program they
broadcast. This car audio system has
been equipped to receive and display
this information.
G If you would like to select a differ-
ent program type, press or
to switch to another program type.
>
G Press or > to start seek tun-
ing.
The next radio station broadcasting the
program selected will begin to play.
34
RADIO OPERATION
Note:
“HICUT 0” indicates that the function is
If the radio is not able to find a station switched off;“HICUT 1” means that the
broadcasting the program type select- treble will be automatically cut as far as
ed, you will hear a beep and “NO PTY” possible.
will appear briefly in the display. The
station selected previously will then
resume play.
G Once you have completed your
settings, press MENU ?.
Selecting the display of variable
Selecting the PTY language
text
It is possible to select the language in
A number of radio stations use the RDS
which the program type is displayed.
signal to transmit advertising or other
texts in place of their station names.
G Press MENU ?.
These “variable texts” will appear in the
display. It is possible to adjust your ra-
dio so that these “variable texts” do not
appear.
“MENU” will appear in the display.
G Press or > repeatedly until
“PTY LANG” appears in the dis-
play.
G Press and hold down RDS 5 until
G Press or > to select from
among German, English and
French.
“NAME FIX” appears in the display.
G To have the “variable texts” dis-
played again, press and hold down
RDS 5 until “NAME VAR” ap-
pears in the display.
G When the language you wish to ac-
tivate appears in the display, press
MENU ? twice.
Interference-related treble cut
(HICUT)
The HICUT function improves reception
when reception begins to deteriorate. If
interference occurs, then the treble and
the noise is cut automatically.
Switching HICUT on/off
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“HICUT” appears in the display.
G Press or > to switch HICUT
on or off.
35
TRAFFIC INFORMATION
Traffic information
Adjusting the volume for traffic
announcements
Switching traffic information
priority on/off
G Press MENU ?.
“MENU” will appear in the display.
G Press TRAFFIC A.
Traffic information priority is activated
when TRAFFIC lights up in the display.
G Press or > repeatedly until
“TAVOLUME” appears in the dis-
play.
Note:
G Press
> to adjust the traffic
announcement volume.
You will hear a warning beep
G if you leave the reception area of
the traffic information station you
are tuned into.
G Once you have adjusted the set-
ting, press MENU ? twice.
G if you are listening to a cassette
tape or a CD, leave the reception
area of the traffic information sta-
tion you are tuned into and the au-
tomatic seek tuning function is una-
ble to find another traffic informa-
tion station.
G if you switch from a traffic informa-
tion station to a station which does
not broadcast traffic information.
Then either switch off traffic information
priority or switch to a different traffic in-
formation station.
Interrupting a traffic announcement
G Press TRAFFIC A during the traf-
fic announcement to interrupt just
this traffic announcement.
The car audio system will switch back
to the previous setting. Traffic informa-
tion priority will remain effective for fur-
ther announcements.
36
TAPE DECK OPERATION
Fast forward/rewind
Tape deck operation
Fast forward
Starting tape deck operation
G Press FF : until it clicks in.
“FORWARD” will appear in the display.
G If there is no cassette in the tape
deck,
G insert a cassette into the tape deck
with the open side facing towards
the right.
Fast rewind
G Press FR 9 until it clicks in.
“REWIND” will appear in the display.
Cassette playback will begin with the
side facing upwards.The cassette sym-
bol will light up in the display.
Stopping fast forward/rewind
G Press the opposite button.
Playback will resume normally.
G If there already is a cassette insert-
ed into the tape deck,
Note:
G press CD•C < repeatedly until
“CASSETTE” appears in the dis-
play.
During fast forward/rewind, the radio
station you are currently tuned into will
play.
Playback will resume on the side of the
tape which was played last.
Traffic information during
cassette playback
Cassette eject
G Press 7.
If you activate the “TRAFFIC” function
(traffic information priority), your car
audio system will always be on stand-
by for traffic information. If a traffic an-
nouncement is received, cassette play-
back will be interrupted and you will hear
the message. For more information, re-
fer to the section on“Traffic information”.
The cassette will eject.
Changing cassette sides
G To switch from SIDE A to SIDE B
and vice versa, press FR 9 and
FF : at the same time.
Note:
Once the tape reaches the end, it will
automatically switch to the other side
(autoreverse).
37
CD CHANGER OPERATION
CD changer operation
Switching the display mode
To switch the display between the track
number and CD number or the track
number and elapsed playing time,
The Minnesota DJ30 and the Ontario
DJ30 come included with the CDC A 08
CD changer.All of the CD changers list-
ed in the section on “Accessories” can
be used in combination with the Augs-
burg C30, the Boston C30, the Dublin
C30 and the Montreux C30.
G press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“CDC DISP” appears in the display.
Note:
G Press or >.
For information on how to handle CDs,
how to insert CDs into the changer and
how to operate the changer, please re-
fer to the instructions included with the
CD changer.
The display setting currently selected
will appear: “TIME” for the display of the
track number and playing time or “CD
NO” for the track number and CD
number.
Starting CD changer operation
G Press or > to make the de-
G Press CD•C < repeatedly until
“CHANGER” appears in the dis-
play.
sired setting.
G Once you have made your set-
tings, press MENU ? twice.
Playback will begin with the first CD the
changer detects in the magazine.
Repeating individual tracks or
entire CDs (REPEAT)
Selecting CDs
G To repeat the track currently play-
G To select a CD up or down in the
magazine, press or > the re-
quired number of times.
ing, press 3 (RPT) @ briefly.
“RPT TRCK” will appear briefly in the
display, RPT will light up in the display.
Selecting tracks
G To repeat the entire CD currently
G To select a different track on the
CD currently playing, press or
> the required number of times.
playing, press 3 (RPT) @ again.
“RPT DISC” will appear briefly in the
display, RPT will light up in the display.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
Stopping the REPEAT function
G To stop the REPEAT function for
the current track or CD, press
3 (RPT) @ repeatedly until “RPT
OFF” appears in the display and
RPT no longer lights up.
G press and hold down either or
>.
38
CD CHANGER OPERATION
Note:
Playing tracks in random order
(MIX)
It is possible to adjust the scan time from
between 5 and 30 seconds in the menu.
G To play the tracks of the currently
selected CD in random order,
press 4 (MIX) @ briefly.
Adjusting Scantime
G Press MENU ?.
“MENU” will appear in the display.
“MIX CD” will appear briefly in the dis-
play, MIX will light up in the display.
G Press or > repeatedly until
“SCANTIME” appears in the dis-
play.
G To play the tracks of all of the CDs
in random order, press 4 (MIX) @
again.
G Press
scan time.
> to select the desired
“MIX ALL” will appear briefly in the dis-
play, MIX will light up in the display.
G Once you have made the settings,
Note:
press MENU ? twice.
The CDC A 08 and the IDC A 09 are
also able to play all of the CDs in the
changer in random order.The other CD
changers first play all of the tracks on a
CD in random order and then select the
next CD in the changer.
Interrupting playback (PAUSE)
G Press 2 ( ) @.
“PAUSE” will appear in the display.
Stopping PAUSE
Stopping the MIX function
G Press 2 ( ) @ during the pause.
Playback will resume.
G To stop the MIX function, press
4 (MIX) @ repeatedly until “MIX
OFF” appears briefly in the display
and MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
G To scan all of the tracks on all of
the CDs in ascending order, press
5 (SCAN) @.
“SCAN” will appear in the display.
Stopping the SCAN function
G To stop the SCAN function, press
5 (SCAN) @.
The track currently scanned will contin-
ue playing.
39
CLOCK
CLOCK
G Once you have selected the mode,
press MENU ?.
Displaying the clock briefly
Activating the clock for display
when the car audio system is
switched off
G Press and hold down MENU (
)
? until the time appears in the dis-
play.
When the car audio system is switched
off, but the vehicle ignition is
switched on, you can activate the clock
display.
Setting the time
G To set the time, press MENU ?.
“MENU” will appear in the display.
G Press MENU ?.
G Press or > repeatedly until
“CLOCKSET” appears in the dis-
play.
“MENU” will appear in the display.
G Press or > repeatedly until
“CLOCKOFF” or “CLOCK ON” ap-
pears in the display.
G Press >.
The time will appear in the display.The
minutes will flash and can be altered.
G Press or > to switch the
clock display on or off.
G Press or > to alter the min-
utes.
G Once you have made the setting,
press MENU ?.
G Once you have altered the min-
utes, press >. The hours will
begin to flash.
Displaying the time briefly when
the car audio system is
switched off
To display the time briefly when the car
audio system is switched off,
G Press or > to alter the
hours.
G Once you have made the settings,
press MENU ? twice.
G press MENU ( ) ?.
Selecting the 12/24-hour time
display mode
The time will then appear in the display
for eight seconds.
G Press MENU ?.
“MENU” will appear in the display.
G Press or > repeatedly until
“24 H MODE” or “12 H MODE” ap-
pears in the display.
G Press or > to switch the dis-
play mode.
40
TONE
Switching Loudness on/off
Adjusting the tone
Loudness boosts the bass and treble
when the volume is low to create a more
natural sound.
Adjusting the bass
G To adjust the bass, press AUDIO
=.
G Press AUDIO (LD) = for more
“BASS” will appear in the display.
than two seconds.
G Press or > to alter the bass.
LD will light up in the display to indicate
that Loudness is active.
G Once you have made the settings,
press AUDIO = twice.
Adjusting Loudness intensity
The Loudness boost can be set in stag-
es from one to six.
Adjusting the treble
G To adjust the treble, press AUDIO
= repeatedly until “TREB” ap-
pears in the display.
G Press MENU ?.
“MENU” will appear in the display.
G Press or > to alter the tre-
G Press or > repeatedly until
“LOUDNESS” appears in the dis-
play.
ble.
G Once you have made the settings,
press AUDIO =.
G Press or > to alter the Loud-
ness setting.
“LOUD 6” is the maximum boost,
“LOUD 1” the minimum.
G Once you have completed adjust-
ing the settings, press MENU ?
twice.
41
BALANCE AND FADER
EXTERNAL AUDIO
SOURCES
Adjusting the balance and
fader
External audio sources
In stead of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
You must activate the AUX output in the
menu.
If you would like to connect another ex-
ternal audio source, you will require an
adapter cable. This adapter cable can
be ordered from any authorized Blau-
punkt dealer.
Adjusting the balance
G To adjust the balance, press GEO
;.
“BAL” will appear in the display.
G Press or > to alter the bal-
ance right/left.
G Once you have made the setting,
press GEO ; twice.
Adjusting the fader
Switching the AUX output on/off
G Press MENU ?.
G To adjust the fader, press GEO ;
repeatedly until “FADER” appears
in the display.
“MENU” will appear in the display.
G Press or > to alter the fader
G Press or > repeatedly until
“AUX OFF” or “AUX ON” appears
in the display.
front/rear.
G Once you have made the setting,
press GEO ;.
G Press or > to switch AUX on
or off.
G Once you have completed your se-
lections, press MENU ?.
Note:
If the AUX input has been switched ON,
you can select it by pressing CD•C <.
“AUX” will then appear in the display.
42
SPECIFICATIONS
Specifications
Amplifier
Output power: 4 x 25 watts RMS
acc. to DIN 45 324
at 14.4 V
4 x 40 watts max.
power
Tuner
Wavebands:
FM
MW :
LW
:
87.5 - 108 MHz
531 - 1602 kHz
153 - 279 kHz
:
(MW and LW are not available for the
Augsburg C30 and the Minnesota DJ30)
FM frequency response:
30 - 15000 Hz
Tape deck
Frequency response:
30 - 18000 Hz
Preamp Out
4 channels:
2 V
AUX IN
AUX:
2 V / 6 kΩ
Subject to technical modification!
43
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Ireland
Danmark
Sverige
Norge
0 18 05 00 02 25
02.525.54.44
014 010 70 07
023 565 63 48
018 958 383 66
(01) 4149400
44 89 83 60
0 51 21 49 40 02
02.525.54.48
014 010 73 20
023 565 63 31
018 958 383 94
(01) 4598830
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Suomi
Österreich
094 359 91
01 610 39 0
015 762 241
094 359 92 36
01 610 39 391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
06/00 TRO
K7/VKD 8 622 402 549
|