Radio / CD
Acapulco RDM 168
Biarritz RDM 169
Montana RDM 169
Sevilla RDM 168
Operating instructions
Display
The display consists of three fields and varies according to the operating mode and function.
Display field 1:
Display field 2:
Display field 3:
Radio mode
Radio mode
Displays active functions
Memory banks and wavebands
Brief indication of preset station (e.g. P1)
Radio frequency or station name
PTY programme type Clock display
- Stereo
- CD inserted
LD - Loudness
CD mode
Current track
CD mode
CD time (elapsed playback time), CD
name, CD number and brief indication of
function switch, Clock display
Radio mode
CD changer mode (optional)
Current track
AF - Alternative Frequency for RDS
PTY - RDS programme type
TA - Priority for traffic information
TP - Traffic programme station
lo - Seek tuning sensitivity
CD changer mode (optional)
Current CD playing
CD time (elapsed time), CD name and brief
indication of changes in function Clock dis-
play
Audio
Numeric and graphic representation of the
volume and audio settings
CD mode
RPT – Repeat function
MIX – Tracks played at random
DSC
Permanent display for DSC programming.
Graphic representation of the volume le-
vel selected.
DSC
Serves as display and input field during
DSC programming Clock display
CD changer mode optional
RPT - Repeat function
MIX - Tracks played at random
Miscellaneous
Indicates new source and the active
functions (e.g. SCAN)
31
Contents
Display .......................................... 31 Selecting a waveband .......................... 42
Traffic programme station
Station tuning ........................................ 42
Scrolling through the broadcast
networks (FM only) ............................... 42
reception with RDS-EON ............. 46
Equipment features list ............... 33
Traffic announcement priority on/off .... 46
Warning beep ....................................... 46
Switching the warning beep off ............ 46
Automatic seek tuning start
(CD mode) ............................................ 46
Adjusting the volume for traffic
Quick reference ............................ 34
Switching between the memory
Remote control operation ..................... 38
banks (FM)............................................ 42
Storing stations ..................................... 42
Storing stations with the strongest
reception automatically with
Travelstore ............................................ 43
Recalling stored stations ...................... 43
Scanning stations with Radio Scan ...... 43 Switching on the CD mode ................... 47
Changing the scan time........................ 43 Inserting a CD ....................................... 47
Important notes ............................ 39
What you need to know ........................ 39
Traffic safety ......................................... 39
Installation............................................. 39
Telephone mute.................................... 39
Accessories (optional) .......................... 39
Additional amplifiers .......................... 39
CD changers ..................................... 39
Remote control unit ........................... 39
announcements and the warning beep.. 46
CD operation................................. 47
Selecting the automatic tuning
Removing a CD .................................... 47
sensitivity .............................................. 43 Selecting a track ................................... 47
Switching between Stereo/Mono (FM) . 44 CD-MIX operation ................................. 47
PTY - Programme Type........................ 44 CD-PAUSE ........................................... 47
Programme types ................................. 44 CD-Repeat (RPT) ................................. 48
Switching PTY ON/OFF........................ 44 CD-Scan ............................................... 48
Checking the programme type of the
CD changer operation.................. 48
station ................................................... 44
Selecting a programme type ................ 44
Removing CDs...................................... 48
Storing programme types ..................... 45
Theft protection system /
Release panel ............................... 40
Detaching the release panel................. 40
Attaching the release panel .................. 40
Care of the control panel ...................... 40
Fixing the release panel ....................... 40
Inserting CDs ........................................ 48
Selecting the operating mode..... 41
CD playback ......................................... 48
Scanning stations with PTY SCAN ...... 45
Selecting a track ................................... 48
PTY priority ........................................... 45
Radio operation with RDS
(Radio Data System ) ................... 41
MIX........................................................ 49
CD-PAUSE ........................................... 49
CD-Scan ............................................... 49
Selecting the display mode .................. 49
AF - Alternative frequency .................... 41
REG - regional programme .................. 41
32
Equipment features list
“Acapulco RDM 168” with multi-colour
CD naming .................................... 50
“Biarritz RDM 169, Montana RDM 169,
Sevilla RDM 168”
display in blue
Start entering CD names ...................... 50
Altering CD names ............................... 50
Deleting CD names .............................. 50
+
+
Digital parametric equalizer (2-band) to
adjust mid-range and high frequencies
Features in common:
•
•
RDS (FM/MW/LW) EON
“SHARX”: automatic intermediate fre-
quency switching designed to reduce
interference from adjacent radio stati-
ons
PTY (Station search according to pro-
gram type)
Clock ............................................. 52
Setting the clock ................................... 52
Displaying the clock .............................. 52
Correcting the time after the power
has been disconnected......................... 52
Deactivating the hour correction
•
•
•
Codem D reception concept
30 station presets
+
CD naming
Clock (precision timing via RDS; swit-
ches automatically between standard
and daylight savings time)
function ................................................. 52
•
Release panel (electronic detachable
operating panel)
Setting the equalizer .................... 53
Notes on making the settings ............... 53
Assistance in setting your equalizer..... 54
•
•
•
•
4-channel preamp out 3V
4 x 40 watts of maximum power output
CD player
DSC programming ....................... 55
Overview of the DSC factory settings .. 57
DMS Disc Management System (CD
changer connection possible)
Specifications............................... 57
•
AUX (connection for auxiliary sound
source)
Amplifier ................................................ 57
Tuner..................................................... 57
CD ......................................................... 57
CD Changer .......................................... 57
•
•
Infrared remote control unit (optional)
Telephone mute (sound sources mu-
ted during telephone calls)
•
•
Bass Logic (1-band equalizer) to adjust
bass and mid-range frequencies
Individual sound settings of each
sound source (“Source Tone Memory”)
33
Quick reference
To prevent the battery from running
down, the system will turn off automati-
cally after approximately one hour of
playback.
function. The “mute” function and the
preset volume can be altered, refer to
“DSC programming”.
1 Detachable operating panel
Press the “REL” button to release the
detachable operating panel and remo-
ve it from the vehicle.
5 CD insert
To re-attach the panel, set it into the
guide on the right-hand side of the
chassis. Gently press in the left side of
the panel until it snaps into place.
Be sure not to press or apply any pres-
sure directly on the display.
3 Eject
After a CD is inserted with the label fa-
cing up, it will automatically be trans-
ported to its playing position. The unit
will automatically switch to playback.
Press this button to eject the CD from
the radio unit.
4 Volume adjustment:
6 Display
The display indicates all settings, ope-
2 Switching the unit on/off
rating modes and functions.
With the operating panel in place and
the ignition switched on, press the on/
off button in the middle of the volume
knob briefly or insert a CD into the unit.
It will play at the preset volume.
7 Rocker switch
When the unit is switched on, it will
play at the preset volume. To adjust
the volume, turn the volume control.
Turn the volume control in a clockwise
direction to raise the volume and in a
counter-clockwise direction to lower
the volume.
Switching on/off with the ignition:
If the unit has been connected as des-
cribed in the instructions, it can also be
turned on and off with the vehicle igniti-
on. The unit will switch on in the mode
used last before it was switched off.
Radio mode
To lower the volume quickly, press the
on/off button briefly. “Mute” will appear
in the display and the volume will drop
to the mute value set in the DSC
menu.
/
Automatic seek tuning
Up
Down
Switching on when the ignition is
off:
It is possible to play the unit with the
ignition turned off (as long as the ope-
rating panel is in place): Press the on/
off button in the middle of the volume
knob briefly to switch the unit on.
<< >> Manual seek tuning
<</>> Up/down in short intervals
(for FM only if “AF” is off)
Press the on/off button again or turn
the volume control to cancel the “mute”
34
For FM only:
Repeat track: press once
briefly.
REVIEW - fast reverse (audi-
ble) - hold button down.
SCAN” will appear in the display,
flashing alternately with the station
name abbreviation of the station cur-
rently being scanned.
<</>> Scrolls through the broadcast net-
works, if AF is on. Example: NDR 1,
2, 4, N-Joy, ...
The stations broadcasting the program
type selected will be scanned.
Stop the Scan/PTY-Scan function:
Press “SC” or the rocker switch briefly.
CD mode
Additional rocker switch functions:
For additional settings use
/
Select track:
AUD
DSC-Mode
PTY
9
8
4
Up
Down,
CD mode
If is pressed only once the unit
will return to the beginning of the
track currently playing.
Important: The corresponding
function must be active.
Press “SC” for approximately 2 secon-
ds. You will hear a beep and “SCAN”
will appear in the display. The tracks
on the CD will be scanned.
Stop the CD Scan function:
Press “SC”.
8 SC-scan/SRC
>>
Fast forward, audible (CUE)
Hold >> pressed down for as long
as necessary.
Radio mode
<<
Fast reverse, audible (REVIEW)
Hold << pressed down for as long
as necessary.
Press “SC” for approximately 2 secon-
ds. You will hear a beep and “SCAN”
will appear in the display, flashing al-
ternately with the station name abbre-
viation of the station currently being
scanned. All of the FM stations within
reception range will be scanned.
CD changer mode
Changer mode
Press “SC” briefly.
All of the CD tracks will be scanned
briefly.
/
Select CD
Up
“SCAN” will appear in the display.
Stop CD-Scan: Press “SC” again.
Down
PTY-Scan
PTY-Scan cannot be started unless
“PTY” is switched on (“PTY” is lit up in
the display).
Press “SC” for approximately 2 secon-
ds. You will hear a beep and “PTY
<< >> Select track
>>
Up: press briefly
CUE - fast forward (audible):
hold button down.
Down: press two or more times
briefly
<<
35
9 AUD
Use this key to activate the menu for
LD - Loudness
Loudness boosts the bass frequency
at low volume.
Loudness on/off: Press AUD until you
hear a beep.
Storing stations
Tune the radio into the station you
would like to store. Press the preset
button on which you want to store this
station (radio will switch to mute) and
hold it down until the radio becomes
audible again and you hear a beep.
tone control.
Treble and bass adjustment
Press “AUD” once briefly: “BASS” will
appear in the display and now you ad-
just this setting as desired by pressing
the rocker switch to the left or the right.
Use the up/down rocker switch keys to
set the treble. “TREBLE” will then ap-
pear in the display.
: DSC (Direct Software Control)
Using “DSC” you can adjust pro-
grammable basic settings to suit your
own personal preferences.
Recalling stored stations
Select the waveband and, on FM the
memory bank (“I”!, “II”, or “T”) as well.
Then press the corresponding preset
button 1-6 briefly to listen to the station
stored there.
Refer to the section on “DSC pro-
gramming” for more information.
Setting the Balance (left/right) and
the Fader (front/rear):
; Clock display
Press “AUD” twice briefly.
When the unit is switched on press
“DIS” briefly and the current time will
appear in the display for approximately
8 seconds.
Additional function for clock display:
Press and hold “DIS” until you hear a
beep to display the time permanently.
If you activate another function, the
time will disappear from the display for
approximately 8 seconds.
Now use the up/down rocker switch to
adjust the volume between the front
and the rear speakers. “FADER” will
appear in the display.
Use the left/right rocker switch keys to
adjust the volume between the left and
right speakers. “BALANCE” will appear
in the display.
Additional function for the station
preset buttons
Storing and recalling the PTY program
type.
When PTY is active (“PTY” will appear
in the display), then you can store and
recall a program type (e.g. rock, pop,
classical, news, etc.) on each for the
station preset buttons for the FM wave-
band.
The selected values will appear in the
display. The last setting is stored auto-
matically.
< Preset buttons 1 to 6
Switch AUD off by pressing the button
again briefly.
Radio mode
CD mode
If you do not make any adjustments to
the tone within 8 seconds, the AUD
mode will quit automatically.
You can store up to six stations in
each memory bank (I, II, and “T”).
On MW and LW you can also store six
stations each.
3/ -Pause
Press the station preset button marked
3/ to interrupt CD playback. “PAU-
36
SE” will appear in the display. Press
button again to resume CD playback.
will appear in the display. Press button = BA/TS
again to resume CD playback.
Switches between the wavebands/me-
mory banks FM I, FM II, TS (Travelsto-
re), MW and LW
4/RPT - Repeat
4/RPT - Repeat
Press the station preset button marked
4/RPT to repeat the CD track currently
playing.
“REPEAT-T” will appear briefly in the
display. “RPT” will light up in display
field 3.
The track title will repeat until 4/RPT is
pressed again or you press the rocker
switch to select a different track.
Press the station preset button marked
4/RPT to repeat the CD track currently
playing.
“REPEAT-T” will appear briefly in the
display.
To activate the repeat function for the
disc currently playing, hold down
4/RPT until you hear a beep.
“REPEAT-D” will appear briefly in the
display.
Extra function: Travelstore
To store the six most powerful radio
stations in the Travelstore bank:
Press BA/TS until a beep sounds or
“T-STORE” appears in the display.
> PTY
(Programme Type)
With “PTY” the station preset buttons
become programme buttons. You can
select a different programme type on
each of the presets, e.g. news, sport,
rock, pop, education, etc. Using the
rocker switch <</>> it is possible to re-
call all of the PTY programme types, if
PTY is activated. Press “PTY” briefly
and “PTY” will light up in the display.
Press “PTY” again to switch the
function off.
5/MIX
Press 4/RPT again to end the repeat
function.
Press the station preset button marked
5/MIX to switch to MIX playback for the
CD currently playing. The tracks on the
CD will be played in random order.
The current setting is briefly indicated
in the display: “MIX CD” will flash
briefly in the display and “MIX” will ap-
pear in display field 3.
5/MIX
Press the station preset button marked
5/MIX to switch to MIX playback for the
CD currently playing. The tracks on the
CD will be played in random order.
The current setting is briefly indicated
in the display: “MIX CD”.
Press 5/MIX again to switch this
function off.
To activate the MIX function for all of
the tracks on the CDs in the magazine, ? AF•TA
CD-Changer mode
hold down 5/MIX until you hear a
beep. “MIX ALL” will appear briefly in
the display.
Press 5/MIX again to switch this
function off.
Alternative Frequency in RDS mode:
Switch the AF function on/off:
Press the “AF” button for approximate-
ly 2 seconds. “AF” will appear in the
display.
3/ - Pause
Press the station preset button marked
3/II to interrupt CD playback. “PAUSE”
37
The radio will use RDS to automatical-
ly search for the best radio frequency
offering the same programme.
To switch the “AF” function off press
the “AF” button for approximately 2 se-
conds and “AF” will disappear in the
display after the beep.
Remote control operation
General information
SRC press briefly: switches audio
sources
press briefly: mutes audio
sources
V+
V-
raises the volume
lowers the volume
TP
“TP” will appear in the display if the ra-
dio station you are currently tuned into
is a traffic information radio station.
TA
Radio mode
seek tuning up
“TA” (Traffic Announcement = priority
for traffic messages)
You can only tune into radio stations
that broadcast traffic information.
TA on/off:
Press “AF.TA” briefly: “TA” will appear
in the display, priority for traffic pro-
grammes activated.
seek tuning down
>>
<<
next FM memory preset, up
press briefly: selects the wave-
band
hold pressed down: Travelstore
CD changer
next CD
previous CD
>>
<<
press briefly: next track
hold pressed down: CUE – fast
forward
press briefly: previous track
hold pressed down: REVIEW –
fast reverse
SRC hold pressed down: List function
38
Important notes
Installation
Accessories (optional)
What you need to know
If you would like to install your new car ste- Use only Blaupunkt-approved accessories
reo yourself or add other audio components and spare parts. You can use the following
to existing ones, then please read the enclo- Blaupunkt products with this audio system:
sed instructions on installation and connec-
Before using your new car audio system,
please read through the following informati-
on carefully.
tion carefully.
Additional amplifiers
Traffic safety
In order to ensure that the unit operates pro-
perly the positive power supply line must be
connected via the ignition and the perma-
nent +12 V lead.
All Blaupunkt amplifiers
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
audio system in a way that could distract
you.
CD changers
Do not ground the loudspeaker outputs! This
will result in damage to the unit output sta-
ges.
Blaupunkt CDC-A 08 and
Blaupunkt CDC-A 072
Please keep in mind that you travel a di-
stance of 14 m per second at a speed of
only 50 km/h.
Remote control unit
Telephone mute
Should the traffic situation become particu-
larly demanding, we advise you not to use
the audio system.
Blaupunkt RC 08 infrared remote control
unit.
If you have installed a car telephone in your
vehicle, it is possible to automatically mute
the radio or CD playback when you use the
telephone (telephone mute).
The RC 08 infrared remote control unit al-
lows you to conveniently operate the most
important functions from the steering wheel.
Always make sure that you are still able to
hear any warning signals coming from out-
side the vehicle, such as police or fire engi-
ne sirens, so that you can react accordin-
gly.
“PHONE” will then appear in the display.
Traffic announcements continue to have
priority if you have activated TA. You can
interrupt traffic messages by pressing TA.
Consequently, you should always select a
moderate volume for playing your car audio
system while you are driving.
39
Theft protection system / Release panel
To best protect your car audio system from
theft, this unit has been equipped with a de-
tachable control panel.
Care of the control panel
Fixing the release panel
After you have removed the release panel, To prevent unauthorised persons from re-
protect it from any form of rough handling. moving the release panel, e. g. from a car
Make sure it does not come into contact with audio systems showroom, you can fix the
any type of fluids. Store it away from direct release panel to the chassis permanently to
sunlight and other sources of heat. The con- lock it into place. Screw the enclosed bolt
nection contact strip which is visible on the into the hole on the left hand side of the unit
rear side of the panel must be in perfect when the release panel is in place, see ar-
condition to ensure that the system is able row.
Detaching the release panel
Press the REL button on the top left of the
radio to release the control panel. Then re-
move the panel. You can remove the panel
regardless of whether the unit is switched
off or on.
to function properly.
It is highly advisable to store the control
panel in the protective case provided.
Attaching the release panel
Slide the panel into the guide points on the
right of the radio unit and then press the left
side into the locking position gently until it
snaps into place. Make sure that you do not
press directly on the display.
The audio system will switch on in the ope-
rating mode last used before the panel was
removed.
40
Selecting the operating
mode
Radio operation with RDS (Radio Data System)
The Radio Data System enhances your en- tomatically searching for an alternative fre-
joyment when you listen to FM radio stati- quency.
Use the SRC (source) button to select bet-
ween radio, CD and CD changer, if applica-
ble.
The CD mode is not available unless a CD
has been inserted.
The CD changer mode is not available un-
less a CD changer is connected and a CD
magazine inserted. Otherwise, “No CD” will
appear in the display.
Press SRC to switch between the operating
modes.
ons.
“SEARCH” will disappear from the display
More and more radio stations now broad- when the alternative frequency has been
cast RDS information along with their regu- found or after the frequency band has run
lar programming.
through completely.
As soon as radio programmes are identified, If the reception quality of the programme
the station name including a regional iden- selected deteriorates beyond a certain point,
tifier, if applicable, will appear in the display, tune into another station.
for example, NDR1 NDS (regional program-
me in Lower Saxony, Germany). When RDS
is activated, the preset buttons become pro-
gramme buttons. You now know exactly
which programme you have tuned into, ma-
king it easy to find the desired station quickly.
But RDS also offers you further advantages:
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers pro-
grammes with different contents in the nor-
thern German states of Schleswig-Holstein,
Hamburg and Lower Saxony at certain times
of the day.
If you are listening to a particular regional
programme and wish to continue doing so,
select “REG ON” in the DSC mode.
If you leave the service area of the regional
programme you are tuned into, or if you
would like to take full advantage of RDS
service, switch to “REG OFF” in the DSC
mode.
AF - Alternative frequency
The “AF” function makes sure that the radio
always tunes into the strongest frequency
for the currently selected programme auto-
matically.
Press the AF•TA button for approximately
2 seconds, until you hear a beep and “AF”
appears in display field 3.
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If “SEARCH” appears in the display when
the radio is switched on or one of the stored
frequencies recalled, the unit is already au-
The display will briefly indicate whether this
function is switched on or off with “REG ON”
or “OFF” when you switch on the “AF”
function.
41
To do this, you can start the Travelstore seek
operation:
Selecting a waveband
Manual tuning with << >>
You can also tune into a station manually.
Important: AF and PTY must be switched
off (i.e. the symbols do not light up in the
display).
If necessary, deactivate these function by
pressing “AF.TA” or “PTY”.
The following wavebands are available:
•
Press “BA/TS” for 2 seconds; the sy-
stem will start to run through the fre-
quency band.
UKW (FM)
MW
LW
87,5 - 108 MHz,
531 - 1602 kHz and
153 - 279 kHz
If “AF” is not lit up,
Press “AF.TA” until you hear a beep.
Press the “BA/TS” button to select the desi-
red waveband.
•
It is now possible to select stations using
<< >>.
Manual tuning:
Station tuning
•
Press << >>; the frequency will change
in short intervals in the corresponding
direction.
Automatic seek tuning
Press / ; the car radio will automati-
cally search for the next station.
If you hold pressed up or down on the
/
Switching between the memory
banks (FM)
•
If you hold << >> pressed to the left or the
right on the rocker switch, the frequency
scan will speed up.
You can switch between the memory banks
I, II and T in order to store stations and re-
call them later.
/
rocker switch, seek tuning will speed up in
the corresponding direction.
The currently selected memory bank will
appear in the display.
Scrolling through the broadcast
networks (FM only)
•
Press the “BA/TS” button as many
times as necessary until the desired
memory bank lights up in the display.
You can use the << >> buttons to tune into
stations in your reception area.
If it is possible to receive several program-
mes in the same broadcast network, you can
scroll through them in the forwards direc-
tion by pressing >>, or backwards using the
<< button, e.g. NDR 1, 2, 3, 4, N-JOY, ...
For this to work properly you must have al-
ready tuned into the stations at least once
and “AF” must be active (lights up in the dis-
play).
Storing stations
Automatic seek tuning
On FM, you can store six stations on the
preset buttons 1 - 6 for each of the memory
banks (I, II, T).
On MW/LW, you can also store six stations
each.
Up
Down
<</>> Up/down in short intervals
(on FM only if “AF” is switched off)
•
Select the appropriate waveband by
pressing BA/TS.
42
•
•
Tune into a station with the rocker
switch (either automatically or manual- on will appear in the display and begin to
ly).
completed, the name of the strongest stati- “AM-SCAN” will light up in the display.
play.
If you want to continue listening to the stati-
If desired, stations can also be stored ma- on which is being scanned, then
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds) or un-
til you hear a beep.
nually in the Travelstore bank, refer to the
section on “Storing stations”.
•
Press “SC” briefly.
This ends the Radio Scan function.
If no station is selected, the scan function
will switch off after the frequency band has
run through. The station selected previous-
ly will resume play.
Recalling stored stations
Now the station has been stored.
The display will indicate which station has
been stored.
You can recall any stored station at the touch
of a button.
•
Select the waveband by pressing BA/
TS. For FM, also choose the corre-
sponding memory bank by pressing
the BA/TS button as many times as
necessary until the desired bank ap-
pears in the display.
Changing the scan time
Note:
If you attempt to store a station which is al-
ready stored, the corresponding station and
the station preset will flash in the display if
you are in a different memory bank.
The scan time per radio station can be set
to between 5 and 20 seconds.
For more detailed information, refer to the
section on “DSC programming - SCANTI-
ME”.
•
Press the corresponding preset button
briefly to recall the station.
Storing stations with the stron-
gest reception automatically
with Travelstore
Selecting the automatic tuning
sensitivity
Scanning stations with Radio
Scan
You can automatically store the six FM sta-
tions with the most powerful signals in your
current reception area sorted according to
their signal strength. This function is parti-
cularly convenient on longer trips.
You can alter the automatic tuning sensiti-
vity.
You can scan through all of the stations in
your reception area.
To start the Scan function:
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, more distant stations.
To switch the automatic tuning sensitivity
and program the sensitivity level, refer to the
section on “DSC programming “.
•
Press “SC” for approximately 2 secon-
ds.
•
Press the “BA/TS” button for 2 seconds.
“T-STORE” will appear in the display.
The scanned frequency or the station name
will start flashing in the display.
During the scanning process “FM-SCAN” or
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
43
Switching between Stereo/Mono Programme types
(FM)
Checking the programme type of
the station
Switch “PTY” on by pressing the “PTY” but-
ton.
You can switch between Stereo/Mono in the
“DSC” menu. This can be an advantage
when the station reception is poor. The car
audio system will select stereo automatical-
ly when it is switched on.
•
Press “PTY” for approximately 2 seconds.
Use <</>> to have the last selected program-
me type displayed and to choose a new one.
You can select any one of the stored types
with the preset buttons 1-6.
After the beep the display will show the pro-
gramme type offered by the station current-
ly playing. If “NONE” appears in the display,
the current station has no PTY code.
The following list indicates some of the pro-
gramme types which are currently available.
POP
ROCK
When reception quality deteriorates, the
system will switch to mono playback.
Refer to the section on Stereo/Mono in
“DSC” programming for information on how
to switch from stereo to mono.
Selecting a programme type
a) Using the preset buttons
When PTY is switched on, you can use
the preset buttons 1-6 to select the
programme types stored at the factory.
WEATHER
CHILDREN
TRAVEL
The playback mode selected is indicated in
the display.
•
•
Press one of the presets 1-6.
The selected programme type will be
displayed for 2 seconds.
HOBBIES
JAZZ
OLDIES
NEWS
SPORT
CULTURE
PTY - Programme Type
PTY is an RDS service offered by an incre-
asing number of broadcasting stations. This
feature allows you to select FM stations
automatically according to their programme
type. After you have chosen the PTY of your
preference, the corresponding stations can
be selected either by seek tuning or using
the scan function.
If you would like to listen to a station
with this PTY, press
seek tuning function.
/
to start the
Refer to “DSC programming – PTY Lang”
to find information on switching the langua-
ge used to display the programme types
between German and English.
If the radio is unable to find a station offe-
ring the selected programme type, the dis-
play will show “NO PTY” and a beep will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
Switching PTY ON/OFF
You can assign different programme types
to each preset position. Please refer to the
next section on “Storing programme types”.
•
Press “PTY”.
When the function is active, the programme
type selected last will briefly appear in the
display and “PTY” will appear permanently.
44
b) Using the <</>> buttons on the rocker
switch
When “PTY” is switched on, you can select
a programme type using buttons <</>>.
•
•
If necessary, press the “PTY” button to As soon as it is possible to receive a pro-
switch on the function.
gramme in the broadcast network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the programme.
Select a programme type using but-
tons <</>> and hold down the desired
preset button (1-6) until you hear a
beep.
•
•
Press << or >>; the programme type
selected last will be displayed for 3 se-
conds.
Example:
-
-
-
-
-
-
-
-
-
Station playing: NDR3.
Now the selected programme type can be
recalled by pressing this preset as long as
“PTY” lights up in the display.
Programme type “POP” selected.
Seek tuning is started.
No station with “PTY-POP” can be found.
The display shows “NO PTY” and
automatically switches back to NDR3.
NDR2 airs a “PTY-POP” programme.
The radio will switch to the linked stati
on NDR2 for the duration of the “POP”
programme.
During this period press >> (forwards)
or << (backwards) to select the desired “PTY” lights up in the display.
type.
•
•
Press << or >> as many times as re-
quired.
Scanning stations with PTY
SCAN
If you would like to listen to a station
Important: “PTY” must appear in the display.
with the selected PTY, press
start the seek tuning function.
/
to
•
Press “SC”.
All of the stations in your current reception
area offering the selected programme type
will be scanned.
If the radio is unable to find a station offe-
ring the selected programme type, the dis-
play will show “NO PTY” and a beep will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
During CD operation, the set will also switch
to the radio programme if the selected PTY
becomes available within the broadcast net-
work.
To switch off PTY-SCAN:
•
Press “SC” or the rocker switch again.
PTY priority
After the PTY programme has ended the
system will switch back to the previous mode
(radio or CD).
Storing programme types
Situation:
PTY is switched on and lights up in the dis-
play.
Each of the preset buttons 1-6 has been
assigned one programme type at the facto-
ry.
If desired, you can also replace these with
other available programme types.
To do so, make sure that “PTY” lights up in
the display.
Note:
No station offering the selected programme
type can be found currently in your recepti-
on range (with seek tuning or scan).
The set will switch back to the station pre-
viously tuned into.
As already mentioned, these functions are
only supported by a limited number of RDS
stations at the present time.
45
Traffic programme station reception with RDS-EON
The abbreviation “EON” stands for Enhan-
ced Other Networks, which means that in-
formation is exchanged within a radio net-
work.
Many FM radio stations provide their ser-
vice area with traffic messages at regular
intervals.
Along with their programmes, all traffic pro-
gramme stations transmit a special carrier
signal, which is decoded by your car radio.
If this signal is identified, “TP” will appear in
the display (Traffic Programme).
In addition to these, there are also stations
which do not actually transmit traffic infor-
mation themselves, but by using RDS-EON
it is possible for them to forward the traffic
messages broadcast by another traffic pro-
•
press a preset button which has a traf-
fic programme station allocated to it.
Traffic announcement priority
on/off
or
If the priority for traffic announcement pro-
grammes is activated, “TA” will light up in
the display.
b) Switch off the priority for traffic an-
nouncements:
To switch the priority on or off:
•
Press “TA”.
•
Press the “AF.TA” button.
“TA” will disappear from the display.
If you press “AF.TA” while a message is
being broadcast, this message only will be
interrupted. The unit will then switch back
to the previous mode. The priority for other
traffic messages remains active.
Please note that several buttons have no
function while a traffic announcement is
broadcast.
Automatic seek tuning start
(CD mode)
If you leave the reception area for the traffic
programme station you have tuned into while
you are listening to a CD, the system will
automatically start searching for a new traf-
fic programme.
If no such station is found within approxi-
mately 30 seconds, a warning beep will
sound every 30 seconds. To switch the
warning beep off, proceed as described abo-
ve.
gramme station in the same radio network. Warning beep
If you want to have the priority for traffic
If you leave the reception area of the traffic
announcements activated while listening to
one of these stations (e.g. NDR3), “TA” must
appear on the display panel.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic programme station (in this case,
NDR2) for the duration of the message and
return to the original programme (NDR3)
afterwards.
programme station currently tuned into, you
will hear a warning beep after approximate-
ly 30 seconds.
This warning will also be emitted if you press
a preset button for a station which does not
send the traffic programme signal (TP).
Adjusting the volume for traffic
announcements and the warning
beep
Switching the warning beep off
Although this volume was preset at the fac-
tory, you can use the DSC function to alter
the setting (see “DSC programming - TA
VOL”).
a) Tune into another station offering traf-
fic information:
•
Press the rocker switch or
46
CD operation
<<
Fast reverse, audible (REVIEW)
Hold << pressed down for as long as
necessary.
This car audio system is also equipped with Removing a CD
a CD player.
•
Press the “Eject” button briefly.
Note:
The CD will eject.
The rocker switch acts as a successive
switch, i.e. press it repeatedly to skip over
several tracks.
The number of the track currently selected
will appear beside “T” in the display.
Use only perfectly circular CDs with a dia-
meter of 12 cm.
CDs with a diameter of 8 cm or CDs manu-
factured in the shape of a butterfly or a beer
mug, for example, are not suitable for use
with this equipment.
Using such CDs can very likely result in the
destruction of the CD and the CD drive.
We assume no responsibility for damages
caused by using unsuitable CDs.
Do not interfere with the automatic CD in-
sert/eject function in any way as this might
damage the mechanism.
If you do not remove the CD, it will be pul-
led back into the unit after approximately 30
seconds.
CD-MIX operation
You can play back the tracks on the CD in
random order. Press “5/MIX” on the station
preset buttons briefly to switch the function
on and off. “MIX” is switched on when “MIX
CD” appears briefly in the display when you
switch audio sources and each time the CD
track changes.
Selecting a track
After you insert a CD, the CD functions will
appear in the display.
Switching on the CD mode
CD is inserted, “CD” lights up in the display.
Press “SCR” to switch the audio source:
•
Press “SRC” as often as necessary un-
til the CD functions appear in the dis-
play (track number and elapsed play-
ing time).
CD-PAUSE
Press the station preset button marked
3/ to interrupt CD playback. “CD-PAUSE”
will appear in the display.
Press this button again to cancel the pause
function. The CD programme will continue
on from where it left off.
/
Select track:
Up
Down
If is pressed only once the unit will
return to the beginning of the track
currently playing.
Inserting a CD
•
•
Switch the car audio system on.
Insert a CD (label facing up) gently into
the CD slot.
>>
Fast forward, audible (CUE)
Hold >> pressed down for as long as
necessary.
The CD will be automatically transported to
its playing position. CD playback will begin.
47
CD changer operation
The CD changer is equipped with a maga-
zine for 10 discs.
Note:
Use only perfectly circular CDs with a dia-
meter of 12 cm.
CDs with a diameter of 8 cm or CDs manu-
factured in the shape of a butterfly or a beer
mug, for example, are not suitable for use
with this equipment.
CD-Repeat (RPT)
CD playback
Press the station preset button marked “4”
during CD playback to repeat the track cur-
rently playing.
“REPEAT” will appear briefly in the display
and the track will repeat until you press sta-
tion button 4/RPT again or press the rocker
switch to select a different track.
Press “SRC” to select the CD changer.
•
Press “SRC” repeatedly until “CHAN-
GER” appears in the display.
CD playback starts with the first CD identi-
fied by the changer.
Selecting a track
Using such CDs can very likely result in the
destruction of the CD and the CD drive.
We assume no responsibility for damages
caused by using unsuitable CDs.
After you have inserted the magazine, keep
the door closed to prevent the magazine
from becoming dusty or dirty.
When CD playback starts, all active CD
functions and the CD identification (e.g.
number, name or elapsed playing time) will
light up in the display.
The name or number of the CD currently
playing will appear in the display.
CD-Scan
You can scan the tracks on a CD.
To start the SCAN function:
•
Press “SC” for approximately 2 secon-
ds. “CD-SCAN” will appear in the dis-
play.
The tracks will be scanned briefly one after
the other in ascending order.
Inserting CDs
Insert one or several CDs into the magazi-
ne (label facing up).
Slide the magazine into the CD changer in
the direction of the arrow.
To end the SCAN function:
•
Press “SC” for approximately 2 seconds.
The track scanned last will begin to play.
The CDs are counted from bottom to top.
>>
<<
Fast forward, audible (CUE).
Fast reverse, audible (REVIEW).
Removing CDs
Press the button repeatedly to skip several
Open the door of the CD changer and press tracks.
the eject button. The number of the selected track will ap-
pear beside “T” (track).
48
RPT
MIX
CD-Scan
CD tracks can be played repeatedly.
The following options are available:
You can have the CD tracks played back in You can scan all of the CD tracks.
random order. To start the SCAN function:
Repeat the current track (“REPEAT-T”) or The following options are available:
Repeat the CD, i.e. all tracks on the current Mix all tracks of one CD (“MIX-CD”) or Mix
•
Press “SC” for approximately 2 secon-
ds. “ SCAN” will appear in the display.
disc (“REPEAT-D”).
all tracks of all CDs (“MIX-ALL”).
All of the tracks on the CDs inserted in the
magazine will be scanned briefly one after
the other in ascending order.
“RPT” will appear in display field 3 as long “MIX” will appear in display field 3 as long
as RPT is active. “REPEAT-T” or “REPEAT- as the MIX function is active.
D” will light up briefly in display field 2 when “MIX-CD” or “MIX-ALL” will light up briefly
you activate this function and each time the in display field 2 when you activate this
To end the SCAN function:
•
Press “SC” for approximately 2
seconds.
track changes.
function and each time the track changes.
Switch REPEAT-T on:
Switch MIX-CD on:
The track scanned last will begin to play.
•
Press “4/RPT” briefly.
Switch REPEAT-D on:
Hold “4/RPT” down for longer.
To switch “RPT” off again: press “4/RPT” To switch “MIX” off again: press “5/MIX”
•
Press “5/MIX” briefly.
Switch MIX-ALL on:
• Hold “5/MIX” down for longer.
Selecting the display mode
•
During CD playback you can select the dis-
play mode:
briefly.
briefly.
“DISC NO” - displays the number of the
CD currently playing.
CD-PAUSE
“NAME”
- displays the name of the CD
currently playing, e.g. “Ma-
donna” (for the Acapulco
RDM 168 only).
Press the station preset button marked
3/ to interrupt CD playback. “CD-PAUSE”
will appear in the display.
Press 3/
again to cancel the pause
“TIME”
- displays the elapsed playing
time of a track, e.g. “2:32”,
in minutes.
function. The CD programme will continue
on from where it left off.
49
CD naming
To switch the display mode:
If the CD has not yet been named, eight
dashes will appear in the display. The first
dash will flash.
Note: The following functions apply to the
“Acapulco RDM 168” only.
You can enter individual names for CDs.
This name (e.g. MADONNA) will then ap-
pear in the display if you have selected “CD
NAME” in the “DSC” menu.
You can enter up to 30 CD names for the
integrated CD player. When you insert the
CD, the player will recognise it and display
the name if you have selected this display
mode in the “DSC” menu.
You can enter up to 99 CD names for the
CD changer. When the CD changer selects
the CD, it will recognise it and display the
name if you have selected this display mode
in the “DSC” menu.
You can switch the display mode in the
“DSC” menu (see DSC programming – CD
DISP).
“TIME” is the factory default setting.
The display mode will appear briefly, follo-
wed by the corresponding value, e.g.
“TIME”, “2:32”.
If you have selected “NAME” and you have
not named the CD playing, the “TIME” dis-
play will appear for this CD.
•
Press << or >> and select a letter,
number or blank space.
Select “_” to enter a blank space.
•
Press << or >> to select the next cha-
racter.
•
Press “DSC” to save the name.
The display will return to the “CDC NAME”
mode.
Also read the section on “CD naming”.
•
Repeat this process to name another
CD.
•
To quit the mode, press “DSC”.
Altering CD names
Start entering CD names
If you want to alter a name which has alrea-
dy been entered, proceed as described in
the section on “Start entering CD names”.
Press “SRC” to select either the CD player
or the CD changer, insert a CD if necessa-
ry.
•
Press “DSC” and
cessary until “CD/CDC NAME” ap-
pears in the display.
/
as often as ne-
Deleting CD names
You can delete individual CD names, the
names for the CD magazine or the comple-
te list of names for the CD player or the CD
changer.
•
Press << >> to switch to “CD naming”.
A CD name or number will appear.
•
•
Press
/
to select the desired CD.
Press << >> to switch to “CD EDIT
MODE”.
Deleting one CD name
•
Activate the “CD NAMING MODE”.
50
•
Select the CD whose name you want
to delete.
Deleting the entire list of names stored
in the CD changer
•
•
Activate the “CD NAME EDIT” mode.
Press “DSC” and hold it down.
•
•
•
Activate the “CD NAMING MODE”.
Activate the “CD NAME EDIT” mode.
Press “DSC” and hold it down.
After 2 seconds (and after 8 and 12 secon-
ds as well) you will hear a beep. After 2 se-
conds “one name” will be deleted. If you
want to delete one name only, then press
DSC for at least 2 seconds but release it
again before 8 seconds have elapsed.
“DELETED” will appear in the display after
the name has been deleted.
You will hear a beep after 2, 8 and 12 se-
conds. The list of names stored in the CD
changer will be deleted after 12 seconds.
Hold the button pressed down for at least
12 seconds.
“DELETED” will appear in the display after
the list of names has been deleted.
The “CDC NAME” mode will appear again
in the display.
The “CDC NAME” mode will appear again
in the display.
Deleting all CD names in a CD
magazine
Deleting the entire list of names stored
in the integral CD player
•
•
•
Activate the “CD NAMING MODE”.
Activate the “CD NAME EDIT” mode.
Press “DSC” and hold it down.
Proceed as described above, except that the
list of names stored in the CD player will
already be deleted after you press and hold
down “DSC” for 8 seconds.
You will hear a beep after 2, 8 and 12 se-
conds. The names in the magazine will be
deleted after 8 seconds. Hold the button
pressed down for at least 8 seconds but re-
lease it before 12 seconds have elapsed.
“DELETED” will appear in the display after
the names have been deleted.
The “CDC NAME” mode will appear again
in the display.
51
Clock
CLK AUTO”. An automatic correction for mi-
nutes will continue to take place.
This is useful if you would like to display the
time for a different time zone, for example.
This car audio system is equipped within a
built-in clock which automatically takes ad-
vantage of RDS to ensure highly accurate
time-keeping (hours, minutes).
For the clock to function properly with RDS,
an RDS station with the CT function (CT –
clock time) must be within reception range.
The automatic correction of the hours can
be switched off. Please be advised that not
all RDS radio stations currently transmit a
time signal (CT – Clock time).
Displaying the clock
You can set the clock to permanent display
in both the radio and CD modes.
If another function is selected, the clock dis-
play will disappear for approximately 8 se-
conds and the station selected, for examp-
le, will appear in the display.
If necessary,
•
Press “DSC” briefly and
/
as often as
required until “CLK MAN/CLK AUTO” ap-
pears in the display.
To switch the display mode:
•
To deactivate the hour correction
function press <</>> to select “CLK MAN”.
Press <</>> to set the hours/minutes.
•
Press “DIS” for approximately 2 secon-
ds until you hear a beep.
•
Correcting the time after the po-
wer has been disconnected
Setting the clock
a) automatically
If the radio has been disconnected from its
power source for any length of time, “0:00”
will appear in the display when it is re-con-
nected.
The time will be set automatically by RDS-
CT, but can also be adjusted manually if
desired.
You need only set the time manually if it is
not possible to receive an RDS station with
CT (clock time).
The clock is set automatically when the
radio is tuned into an RDS station
which has the “CT” function (clock
time).
b) manually with DSC-CLOCKSET
•
Press DSC briefly, the menu will ap-
pear in the display. Press as often
/
as necessary until “CLOCK SET” ap-
pears in the display.
•
•
Press << >> to set the hours/minutes.
You can move to a different position by
pressing / .
Deactivating the hour correction
function
After you have set the clock, press
“DSC” briefly to store the new setting.
In the DSC menu it is possible to switch off
the hour correction function with “CLK MAN/
52
Setting the equalizer
These parametric filters can be adjusted to Now refer to “Sound impression/problem” in
very exact settings even without the help of the table and you will find suggestions to
The acoustic characteristics of the car in-
terior affect the quality of the sound repro-
duced in your vehicle to a much greater ex-
tent than the speakers.
measuring instruments.
eliminate any problems under “What to do”.
The individual steps you have to take to The “HIGH EQ” and “LOW EQ” filters can
make these settings are described in the be set in the “DSC” menu:
following table.
Position, installation and the rear volumes
of, for example, the door or rear window
shelf all play an important role.
•
Press “DSC”. Press
/
as often as
necessary until “HIGH EQ” or “LOW
EQ” appears in the display.
Even the sound produced by well selected Notes on making the settings
and installed speakers can be affected ne-
The following notes are intended as recom-
gatively by the resonance in the vehicle in-
mendations only. They do not necessarily
terior.
•
•
•
Press << or >> once and set the level
in the following table by pressing / .
reflect your own personal sound prefe-
Press << >> to switch the frequency
range.
As a result, the bass sounds may be lost or
rences.
reverberate, the mid-range tones sound too
We recommend that you use a music CD
overpowering and music instruments or
you are familiar with to make the settings.
voices may be distorted or the total sound
The CD should include tracks with different
quality may be completely lifeless.
Press “DSC” to store your settings.
You can switch the equalizer on and off in
the “DSC” menu using the “EQ ON” or “EQ
OFF” option.
instruments and vocals. Purely electronic
The overall sound quality can be greatly
music is not well suited to serve as a basis
Now you can compare the sound produced
by your car stereo with or without the equa-
lizer.
enhanced if certain frequencies are suppres-
sed or boosted.
for making the settings because the original
sounds cannot be determined.
This car audio system is equipped with one
Before you set the equalizer, set bass, treb-
(Biarritz RDM 169, Montana RDM 169, Se-
le, balance and fader to “0” and switch the
villa RDM 168) or two (Acapulco RDM 168)
Loudness function off, if necessary.
parametric filters. The first filter “LOW EQ”
This setting is described in the Quick Refe-
can be set from 32 to 500 Hz, the second
rence under AUD.
filter “HIGH EQ” from 630 to 10,000 Hz. In
Now listen to the CD you have selected.
this context, parametric means that it is pos-
sible to set the frequency and either boost
or reduce it (+10 to –20 dB) individually for
each of these filters.
Evaluate the sound according to your own
personal preferences.
53
Assistance in setting your equalizer
Start to make your settings in the mid-range/treble and end it with the bass range.
Frequency range
Sound impression/problem
What to do
Notes
Bass
30 - 100 Hz
Bass reproduction too weak
Boost the basses with the
“LOW EQ” filter
Frequency: 50 to 100 Hz
Level: +4 to +6 dB
Avoid distortion. Boost the
level carefully if the speaker
diameter is too small
Lower mid-range
100 - 400 Hz
Reduce the lower mid-range
with the “LOW EQ” filter
Frequency: 125 to 400 Hz
Level: approximately –4 dB
The tone may become too
lean and aggressive.
Pay attention to the under-
lying tone of the music.
Unclear bass
Playback reverberates
Unpleasant pressure on the
ears
Mid-range sound
400 - 4.000 Hz
Sound appears to be in the
foreground, very aggressive,
no stereo effect
Reduce the mid-range with
“HIGH EQ” filter
Frequency: 1000 to 2500 Hz
Level: -4 to –6 dB
Playback should not be too
quiet.
Tone too powerless
Boost treble range with
“HIGH EQ” filter
Frequency: approximately
10 kHz
Treble
4.000 - 20.000 Hz
Lifeless reproduction
Lack of transparency
Instruments do not sparkle
Avoid a piercing type of tone
Strong hissing sound un-
pleasant
Level: +2 to +4 dB
54
DSC programming
AM ON/OFF It is possible to block out
one or both of the AM wave-
bands (MW/LW).
CLK. MAN. Switches off hour correction
function.
The car radio has been equipped with DSC
(Direct Software Control) to allow you to cu-
stomise certain programmable, basic set-
tings to suit your personal needs and prefe-
rences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
Read the information in the
section on “Clock “.
This means you will select
only the wavebands you
want when you press “BA/
TS”:
AM ON - all wavebands are
available
CLK. AUTO Automatic hour correction
using the RDS/CT signal.
Refer to the section on
“Clock”.
CLK. 12/24 Switches between 12-h and
MW OFF - LW, FM only
LW OFF - MW, FM only
AM OFF - FM only
24-h clock display.
If you wish to alter any of the programming,
CD DISP.
To select the NAME or
TIME display mode.
•
press “DSC”.
Use the rocker switch to select and set the
functions you wish to change. The display
will show you the setting you have selec-
ted.
AUX IN
If another signal source is
connected to the CD chan-
ger input, you must switch
AUX to ON. Press “SRC” to
select the “AUX” function.
“AUX” will appear in the dis-
play.
Refer to the section on “Sel-
ecting the display mode “.
CDC DISP To select the NAME, TIME
or CD number for the CD
changer.
Press
/
to select the function.
Press << />> on the rocker switch to chan-
ge or recall the values.
Note:
CD NAME
Appears only during CD
playback.
BEEP
Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9. (0 =
off)
Whether the settings listed in the following
are available or not depends on the car au-
dio system model and the features with
which it is equipped.
If you cannot select any of the functions li-
sted here, then your car audio system is not
equipped with that feature and it cannot be
adjusted as a result (also see the section
on “Equipment features list”).
Use this function to give
your CDs individual names.
Refer to the section on “CD
naming”.
DISP.
ON/OFF. Here you can set
the clock to permanent dis-
play when the audio system
is switched off. The clock
display will remain visible
until the ignition is switched
off.
CLOCKSET Sets the clock manually.
Refer to the section on
“Clock”.
55
EQ ON/OFF Switches the equalizer
Refer to the section on
“Equalizer setting”.
SHARX
Activates automatic interme-
diate frequency bandwidth
switching for FM.
In areas where there is a
large number of radio stati-
ons on the air, switch to
“SHARX ON” to reduce in-
terference from adjacent ra-
dio stations.
functions on and off.
HIGH EQ
Equalizer setting:
LOUDNESS Loudness boosts the bass
frequencies at low volume.
LOUD 1 - Low boost
To activate the frequencies
and set the level for the up-
per frequency range.
Refer to the section on
“Equalizer setting”.
LOUD 6 - Max. boost
MUTE
It is possible to lower the au-
dio volume quickly at the
touch of a button. Here you
can program the volume to
which the audio will drop.
HICUT
Reduces interference under
poor reception conditions by
cutting the treble.
STEREO/
MONO
Switches between stereo
and mono manually. The
mode selected will appear
briefly in the display. The
car audio system will select
“STEREO” playback auto-
matically each time it is swit-
ched on.
Select “NO HI-CUT” or
“HI-CUT 1, 2 or 3”.
3 = cuts the treble the most.
PEAK
PEAK ON: Displays the dy-
namics of the music signal.
PEAK OFF: Permanent dis-
play for the volume
LO-DX
Adjusts seek tuning sensiti-
vity.
PTY LANG Allows you to select bet-
ween German and English
for the display of the pro-
gramme types.
“LO” stands for local recepti-
on.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into wea-
ker stations which are furt-
her away.
TA. VOL
Adjusts the volume for traffic
announcements and the
warning beep.
The message will be heard
at this volume, if the stan-
dard volume is lower.
If the standard volume is set
higher than the TA VOL le-
vel, then the traffic report
will be played at the stan-
dard volume.
REG
To listen to a regional radio
programme outside of its
RDS transmission range,
switch on “REG ON”.
For full RDS service, switch
to “REG OFF”.
SCANTIME Use this function to set the
scan time for the radio or
CD player from 5 to 20 se-
conds.
LOW EQ
Equalizer setting:
To activate the frequencies
and set the level for the lo-
wer frequency range.
56
Specifications
ON VOL
Sets the turn-on volume. If
set to “VOL 0”, the unit will
automatically play at the vo-
lume last selected before it
was switched off.
Overview of the DSC factory set-
tings
Amplifier
Output power:
4 x 25 W RMS
power acc. to DIN
45324 at 14.4 V
4 x 40 W max.
power
AM ON/OFF
AUX IN
ON
OFF
BEEP
4
Press “DSC” to save any changes made in
the settings and to quit the “DSC” menu.
CLK MAN/AUTO
CLK 12/24
CD DISP
AUTO
24
Time
Tuner
CDC DISP
DISP ON/OFF
EQ. ON/OFF
HICUT
TIME
OFF
OFF
2
Wavebands:
FM
MW
LW
87,5 - 108 MHz
531 - 1602 kHz
153 - 279 kHz
HIGH EQ
630 Hz / 0 db
LO-DX
LOW EQ
SENS DX 1
32 Hz / 0 db
3
15
ON
English
OFF
10
ON
Stereo
30
FM frequency response:
20 - 16.000 Hz
LOUDNESS
MUTE LEVEL
PEAK ON/OFF
PTY LANG
REG. ON/OFF
SCANTIME
SHARX
CD
Frequency response: 20 - 20.000 Hz
CD Changer
Frequency response: 20 - 20.000 Hz
STEREO/MONO
TA. VOL
T. ON VOL
0
Subject to modification!
57
Service-Nummern / Service numbers / Numéros du service après-vente / Numeri del servizio di assi-
stenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviçco
Tel.:
Fax:
Deutschland
Belgique
France
Nederland
Great Britain
Denmark
Sverige
018 050 002 25
025 255 444
014 010 70 07
023 565 63 48
018 958 383 66
44 89 83 60
051 214 940 02
025 255 448
014 010 73 20
023 565 63 31
018 958 383 94
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Norway
Suomi
Österreich
Greece
094 359 91
045 989 90 28
015 762 241
094 359 92 36
016 103 93 91
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
11/99
K7/VKD 8 622 402 260
|