Blaupunkt BARCELONA RCM 104 A User Manual

Operating instructions  
Barcelona RCM 104 A  
Table of contents  
PTY – Program Type ............................ 36 Scanning cassette titles with SCAN ...... 43  
Station naming ...................................... 37 Dolby B•C NR ....................................... 43  
Skipping unrecorded tape sections with  
Quick instructions ........................ 27  
Important notes ............................ 31  
Reception of traffic announcements  
BLS - Blank Skip ................................... 43  
What you really have to read ................ 31  
Traffic safety ......................................... 31  
Installation/connection .......................... 31  
Optical indication of theft protection .. 32  
KeyCard ................................................ 32  
Replacing a KeyCard......................... 32  
with RDS-EON............................... 38  
Listening to the radio during fast winding  
with RM (Radio Monitor) ....................... 43  
Care of your audio equipment............... 43  
Traffic announcement priority on/off ..... 38  
Warning beep ........................................ 38  
Switching the warning beep off.......... 38  
Automatic seek tuning start................... 39  
Adjusting the traffic message volume ... 39  
DSC programming........................ 44  
CD changer control (option)........ 47  
Selecting the operating mode ..... 33  
Traffic Memo (TIM) ....................... 39  
Switching the CD mode on  
using SRC of the car radio .................... 47  
Selecting a CD/track using the rocker  
switch .................................................... 47  
SCAN .................................................... 47  
MIX ........................................................ 47  
Entering/displaying CD names.............. 48  
Deleting CD names ............................... 48  
Survey of DSC default settings ............. 49  
Radio operation with ADA and  
RDS................................................ 33  
Warning ........................................ 39  
Recalling stored traffic announce-  
ments ................................................. 39  
TIM standby mode when the radio is  
turned off ........................................... 39  
Setting the time in the DSC menu: .... 40  
Adjusting the TIM standby mode/  
TIM time............................................. 40  
Deactivating the TIM standby mode .. 40  
Warning............................................ 40  
RT – Radiotext ...................................... 41  
ADA....................................................... 33  
RDS ...................................................... 33  
AF - Alternative Frequency ................... 33  
REG - Regional ..................................... 34  
Selecting the waveband ........................ 34  
Automatic seek tuning ....................... 34  
Manual seek tuning ........................... 34  
Adjusting the seek tuning sensitivity ..... 34  
Stereo - mono switch (FM).................... 34  
Changing the memory bank (FM) ......... 35  
Storing stations ..................................... 35  
Storing the strongest stations auto-  
Appendix ....................................... 49  
Technical data....................................... 49  
Tape operation.............................. 42  
Inserting a tape ..................................... 42  
Removing a tape ................................... 42  
Fast forward/rewind .............................. 42  
Selecting titles with CPS ....................... 42  
Autoreverse........................................... 42  
Tape type detection .............................. 42  
matically with Travelstore...................... 35  
Recalling stored stations ....................... 35  
Preset scanning .................................... 35  
Scanning stations with Radio Scan....... 36  
26  
Quick instructions  
To operate the set when the ignition is  
switched off (KeyCard is inserted), pro-  
ceed as follows:  
Press “ON” after the double beep tone.  
The set will be turned on.  
To avoid that the battery goes flat, the  
system will be turned off automatically  
after a playback time of one hour.  
4 M•L  
To change between medium wave  
1 Switching on:  
Press the ON button (the KeyCard has  
to be inserted), the set plays with the  
pre-adjusted volume.  
(MW) and long wave (LW) frequencies.  
Switching off:  
5 -dB - for instantly changing the volume.  
Press the -dB button to instantly mute  
the audio source. The display will then  
show MUTE. Return to normal volume  
by pressing either the -dB or the VOL+  
button.  
Press ON for approximately 1 second.  
If the set was turned on by pressing  
ON, the KeyCard can be used for swit-  
ching the system on and off. Please  
read the information of chapter “Key-  
Card”.  
The set may also be turned off via the  
vehicle’s ignition (provided that it was  
connected correspondingly). After the  
ignition was switched off, a double  
beep tone reminds you that you should  
remove the KeyCard before leaving  
your vehicle.  
2 To change the volume:  
Press VOL+/VOL-.  
When pressing VOL-, the normal play-  
back volume is identical to the -dB (mu-  
ted) volume.  
To program the mute volume, proceed  
as follows:  
Each time the set is switched on, it will  
play with the pre-adjusted volume (VOL  
FIX). You may also change the VOL  
FIX setting (see chapter “DSC pro-  
gramming“).  
Adjust the desired volume.  
Press -dB for approximately 2 se-  
conds (beep tone is released).  
3 FMT  
This volume will then be stored as the  
mute volume.  
Extra function:  
Press this button to store the values set  
in the DSC menu.  
Press this button to switch between the  
memory banks I, II, and T (Travelstore).  
As soon as this button is pressed, the  
system will automatically switch to FM.  
Extra function:  
Store the six most powerful stations  
automatically with Travelstore:  
Press FMT until seek tuning starts in  
the display.  
27  
6 Rocker switch  
To stop the function:  
network, e.g. from  
Press the opposite button.  
NDR1 to NDR4 (North  
German broadcaster).  
Radio operation  
/
or << >>  
Changer operation  
Station search  
7 Display  
up  
Selecting a track (upwards): Press briefly  
CUE - fast advance (audible):  
Press and hold down  
Radio mode  
Station name  
(RIAS/DSK)  
Waveband  
Memory bank (FM I)  
down in short  
intervals  
(when AF is off)  
up in short  
intervals  
(when AF is off)  
Cassette mode  
Select disc  
(downwards)  
Select disc  
(upwards)  
TR 1 (track 1)  
Dolby B NR  
down  
CD mode  
(option)  
Repeating a track: Press briefly  
Selecting a track (downwards):  
Briefly press twice or more  
Disc number,  
title number  
Tape operation  
REVIEW - fast reverse (audible):  
Press and hold down  
CPS  
Select title in  
forwards direction  
8 KeyCard  
In order to operate the set, the Key-  
Card has to be inserted.  
Extra functions:  
AUD  
GEO  
see H  
see I  
Fast  
rewind  
Fast  
forward  
DSC - MODE see F  
Select function and  
program parameter.  
“AF” in the display  
Use the << >> buttons  
to scroll through the  
programs of a radio  
AF - MODE  
For this purpose, introduce the Key-  
Card (contact area showing up) into  
CPS  
Select title in  
backwards direction  
28  
the corresponding slot above the Key-  
Card tongue.  
Read also the information given in the  
“KeyCard” chapter.  
To activate/deactivate the priority for  
traffic announcements:  
Press TIM for approximately 2 seconds.  
TA (Traffic Announcement)  
SCAN  
For briefly playing all receivable stati-  
ons or the titles during tape or changer  
operation (option).  
If TA lights up in the display, the system  
will only play traffic stations.  
TA on/off: Press the TIM button for  
approximately 2 seconds.  
To start/stop Scan: Press PS for ap-  
prox. 2 seconds.  
9 AF button (alternative frequency) du-  
ring RDS operation  
The scan time can also be altered (see  
chapter “DSC programming” - SCANTI-  
ME).  
When “AF” lights up in the display, the  
system will automatically seek a fre-  
quency offering better reception of the  
same RDS program.  
Note the warning under “Traffic  
Memo (TIM)”.  
> RM (Radio Monitor)  
< 1, 2, 3, 4, 5, 6 - preset buttons  
You can store 6 stations on each FM  
memory bank (I, II, and “T“) and  
another 6 stations on MW and LW  
each.  
Press this button to listen to the radio  
while fast forwarding or fast rewinding  
the tape.  
“AF” on/off: Press the AF button briefly.  
When pressing the AF button for about  
2 seconds, the display will show REG-  
ON or REG-OFF (see also chapter  
REG - Regional).  
During tape operation:  
To switch RM on/off: Press RM.  
When this function is activated, the  
display shows “RM”.  
To store a station: Press button during  
radio operation and hold down until the  
radio comes on again.  
To recall a station: Select the wave-  
band. On FM, select the desired memo-  
ry bank and press the corresponding  
preset button.  
: PTY button (Program Type)  
Activates the PTY mode. In the PTY  
mode, the station buttons become pro-  
gram buttons, for programs such as  
NEWS, SPORT, POP MUSIC,  
SCIENCE, etc.  
The radio is played during fast tape run.  
? B•C – Dolby B•C NR  
This set allows you to play back tapes  
that have been recorded with Dolby-B  
NR, Dolby-C NR or without Dolby noise  
reduction.  
Press B•C to adjust to the type of Dolby  
NR in which the tape was recorded or  
to disengage Dolby NR. When Dolby is  
active, the corresponding indicator “B”  
or “C” will light up.  
= PS  
; TIM/TA  
Preset Scan  
Press button briefly to scan the stations  
stored on the preset buttons.  
TIM (TraffIc Memo)  
To play all the stored traffic announce-  
ments:  
Press TIM briefly.  
29  
E lo  
To change the seek tuning sensitivity.  
For more information, see chapter  
“DSC programming”.  
@ Eject button  
Press  
.
lo lit up in the display indicates normal  
seek tuning sensitivity (the system will  
only pick up powerful nearby stations).  
lo off indicates high seek tuning sensiti-  
vity (the system will also pick up wea-  
ker stations).  
H AUD  
A Cassette loading slot  
To adjust the treble and bass frequen-  
cies using the rocker button.  
Insert tape (side A or 1 facing up, the  
open side showing to the right).  
Treble  
+
B Tape side selector  
To change the seek tuning sensitivi-  
ty: Press lo.  
Press  
to switch over during tape  
operation. The display shows “TR 1”  
(track) or “TR 2”.  
Using DSC it is possible to preset the  
seek tuning sensitivity for local (“S-LO”)  
and distant reception (“S-DX”). For  
more information read chapter “DSC  
programming”.  
Bass  
+
Bass  
C MIX  
see chapter “CD changer control”.  
D BLS (Blank Skip)  
F DSC (Direct Software Control)  
Use the DSC function to adapt a num-  
ber of programmable basic settings to  
suit your listening preference. For more  
information, read through chapter “DSC  
programming”.  
Treble  
Use this function to skip blank sections  
of the tape.  
The last setting will be automatically  
stored.  
If the setting remains unchanged within  
8 seconds, the display will switch back  
to the previous indication.  
As soon as an unrecorded portion of  
more than 15 seconds is detected du-  
ring playback, the system will automati-  
cally forward the tape to the beginning  
of the next title.  
In this case, the display will show  
“CPS-FF”.  
To switch BLS on/off: Press the BLS  
button.  
G LD (loudness)  
Use this function to boost the low fre-  
quencies for more bass, especially at  
low volume levels.  
To switch LD on/off: Press the button.  
When the loudness function is activa-  
ted, the display shows “LD”.  
When the function is active, “BLS” will  
light up in the display.  
30  
Important notes  
I GEO  
To adjust the Balance (left/right) and  
To switch RT on: Press RT and wait  
until the message text appears on the  
display.  
What you really have to read  
Before you operate your new car radio, plea-  
se read the following information carefully.  
Fader (front/rear) settings.  
To switch RT off: Press RT.  
Fader front  
Traffic safety  
K SRC (source)  
To select between the connected audio  
sources, for example cassette, radio, or  
CD changer (option).  
As the driver of a motor vehicle, it is your  
responsibility to pay attention to the traffic  
situationatalltimes.Neveruseyourcarradio  
in a way that could distract you.  
Please keep in mind that you travel a di-  
stance of 14 m per second at a speed of only  
50 km/h.  
Balance  
left  
Balance  
right  
Do not adjust your radio in difficult driving  
conditions that demand your full attention.  
Always make sure that you are still able to  
hear any warning signals coming from outsi-  
deofthevehicle, suchaspoliceorfireengine  
sirens, so that you can react accordingly.  
Fader rear  
The last setting will be stored automati-  
cally.  
If the setting remains unchanged within  
8 seconds, the display will switch back  
to be previous indication.  
Installation/connection  
In order to ensure that the set functions  
properly it is necessary that the positive po-  
wer supply line is connected to the ignition  
and the permanent +12 V connector of the  
car radio.  
If you would like to install your new car radio  
byyourselforaddotheraudiocomponentsto  
the existing ones, then please read carefully  
the enclosed instructions on installation and  
connection.  
J RT – Radiotext  
Use this function to display message  
texts transmitted by an RDS station. RT  
messages will only be displayed if the  
ignition is switched off.  
Turn on the set.  
31  
Do not connect the loudspeaker outputs to First, slightly press the card in. This releases Replacing a KeyCard  
ground!  
the  
KeyCard;  
the  
display  
shows  
Any KeyCard can only be replaced by a new  
one with the same number (1 or 2). Should  
you wish to replace KeyCard 2, for example:  
Use only the accessory and replacement “LEARNING”. Now you can pull out the card.  
parts approved by Blaupunkt.  
Should the KeyCard be lost or damaged,  
then please contact one of our authorised  
service partners to get a new card.  
Insert KeyCard 1 and switch the radio  
on.  
Optical indication of theft protection  
Theservicecentresaremarked( )inthecar  
radio service centre list. In case of doubt,  
please contact the central service centre in  
your country for more information on the  
KeyCard service centre closest to you.  
Use either KeyCard (1 and 2) to individually  
store the following functions as desired:  
bass, treble, balance and fader settings, pre-  
set stations, loudness, TA (traffic announce-  
ment volume), SPEECH (tone control for  
speech programs), BEEP volume, SCANTI-  
ME, VOLFIX.  
In addition to this, the settings activated be-  
fore switching the radio off, such as the  
waveband, station, TApriority, loudness, AF,  
CPS, Dolby B/C, RM, REG ON/OFF or seek  
tuning sensitivity will also remain stored.  
When you insert your KeyCard, the basic  
settings you have programmed will automa-  
tically be activated.  
When the car is stationary, you can let the  
KeyCardtongueflashinordertoindicatethat  
the set is equipped with security coding. Use  
DSC to select one of two settings: LED ON or  
LED OFF.  
Slightly press the card and it will move  
into the removal position. “LEARNING”  
will then appear in the display.  
Remove KeyCard 1 and insert the new  
KeyCard 2 while the display is still  
showing LEARNING.  
For more information, please read through  
chapter “DSC programming - LED ON/OFF”.  
Now you can operate the set with the new  
KeyCard 2.  
You can switch the radio on only after inser-  
ting either a KeyCard 1 or 2.  
KeyCard  
The car radio can only be operated using  
either KeyCard 1 or 2. Their codes are stored  
in the unit.  
Turn on the set and introduce the KeyCard  
completely. The car radio is now ready for  
operation. When inserting a wrong KeyCard,  
the display will show “----”.  
After approximately 10 seconds, “CARD  
ERR” will appear in the display. In this case  
do not make any further adjustments until  
you have the corresponding KeyCard availa-  
ble.  
Never try to pull out the KeyCard by force.  
32  
Selecting the operating  
mode  
Radio operation with ADA and RDS  
identifier, if applicable, will appear in the  
ADA  
display, for example “NDR1 NDS” (local ra-  
dio program of Lower Saxony, Germany).  
With RDS, the preset buttons become pro-  
gram buttons. Now you know exactly which  
program you have tuned into and in future  
you can select this program directly.  
With the SRC (source) button you can select  
between the following modes:  
This car radio features ADA (Auto Directio-  
nal Antenna).  
The 2-fold ADA system developed by Blau-  
punkt incorporates two tuners (Codem IV  
concept) and sets new standards in recepti-  
on quality, which is clearly superior to other  
systems.  
radio,  
tape,  
CD changer (option), or  
But RDS even offers you more advantages:  
operation of another audio component  
connected.  
With ADA, the set simultaneously analyses  
AF - Alternative Frequency  
To select one of the operating modes, it is of and processes the signals furnished by two  
course necessary that the corresponding antennas. Compared to traditional concepts,  
system is available, i.e. the add-on compo- this leads to a considerable improvement in  
nent must be adequately connected and the the radio reception quality.  
soundcarrier(cassette, disc, changermaga- Also, multipath interference effects (produ-  
zine) inserted.  
TheAFfunctionmakessurethattheradiowill  
always tune into the optimum frequency for  
the RDS station you are listening to.  
This function is activated if “AF” lights up in  
the display.  
ced by hills or buildings) are minimised to an  
To switch over to the next operating mode extent unparalleled so far.  
available,  
In order to switch AF on/off:  
Press the AF button briefly.  
ADA on/off - antenna test  
press the SRC button.  
During seek tuning for the frequency offering  
the best reception of the selected program,  
the radio will be muted briefly.  
WhenSEARCHappearsinthedisplayafter  
the radio has been switched on or one of the  
stored frequencies retrieved, then the radio  
is automatically searching for an alternative  
frequency.  
“SEARCH” goes out as soon as the system  
has found an alternative frequency or after  
the frequency band has been run through  
completely.  
You can switch off ADA and test the anten-  
nas. For more information, read through  
chapter “DSC programming, ADA”.  
RDS (Radio Data System)  
The Radio Data System offers you more  
convenience when listening to FM.  
More and more radio stations have begun to  
broadcast additional RDS information a-  
longside their programs.  
As soon as a radio program has been identi-  
fied, the station name including a regional  
33  
Should the reception quality of the selected  
program become too bad,  
Select the desired waveband by pres-  
sing the FMT or M•L button.  
Adjusting the seek tuning sensi-  
tivity  
tune into another program.  
To switch between MW and LW:  
press M•L.  
The set allows you to modify the seek tuning  
sensitivity.  
If “lo” is indicated, the radio will only pick up  
strong stations (low sensitivity).  
Ifloisdeactivated,theradiowillalsopickup  
less powerful stations (higher sensitivity).  
REG - Regional  
Automatic seek tuning  
Press / . The radio will automatically  
tune into the following station.  
/
Certain radio programs are split up at times  
intoregionalprogramsofferinglocalinforma-  
tion. If you are listening to one program and  
move to an area where another linked regio-  
nal program becomes stronger, the unit will  
If you keep the upper or lower part of the The degree of sensitivity can be separately  
rocker switch  
adjusted for both levels (see chapter “DSC  
programming“).  
/
depressed, seek tuning  
switchtothatprogram.Ifyouwishtocontinue speeds up in upwards or downwards direc-  
tion.  
listening to the first station:  
Press the AF button for about 2 sec.  
The display will show “REG ON”.  
Stereo - mono switch (FM)  
up  
If reception is poor, you may get better sound  
quality if you switch to mono:  
If you leave the service area of the regional  
station tuned into, or if you would like to take  
advantage of the full RDS service, then  
switch to “REG OFF”.  
down in short  
intervals  
(when AF is off)  
up in short  
intervals  
(when AF is off)  
Press lo for approximately 2 seconds.  
Thestereosymbol willdisappearformono  
playback.  
Eachtimethecarradioisswitchedon, stereo  
playback is activated.  
The unit will automatically switch to mono  
playback under poor reception conditions.  
Press the AF button for about 2 sec.  
until “REG OFF” is displayed.  
The display will show “REG ON” or “REG  
OFF” every time the radio is switched on.  
down  
Manual seek tuning << >>  
Prerequisite: AF is switched off!  
Selecting the waveband  
Press << or >> to change the frequency  
in small steps in upwards/ downwards  
direction.  
This car radio can be used in any of the three  
following wavebands:  
FM 87.5 - 108 MHz  
MW 531 - 1602 kHz, and  
LW 153 - 279 kHz  
If you hold down the right or left part of the  
rocker switch, then the car radio will move  
through the stations quickly.  
34  
Note:  
Changing the memory bank (FM)  
Recalling stored stations  
Should you tune into a station which has  
already been stored, the corresponding pre-  
set button and the memory bank will start  
flashing in the display for a short while, if you  
have selected another memory bank.  
YoucanshiftbetweenthememorybanksI,II,  
and “T” to store and to recall preset stations.  
Theselectedmemorybankisindicatedinthe  
display.  
You can recall any stored station by pressing  
the corresponding preset button.  
Press FMT or M•L to select the wave-  
band. For FM, also choose the corre-  
sponding memory bank by pressing  
FMT until the desired bank is indicated  
in the display.  
Press FMT until the desired memory  
bank lights up in the display (press re-  
peatedly if necessary).  
Storing the strongest stations  
automatically with Travelstore  
Briefly press the corresponding preset  
button.  
You can use the Travelstore memory bank to  
automatically store the six strongest FM sta-  
tions sorted on the preset buttons according  
to their signal strength. This feature is espe-  
Storing stations  
Using the preset buttons 1, 2, 3, 4, 5, 6 you  
can store six stations on each FM memory  
bank (I, II, T).  
In the MW/LW range you can store six stati-  
ons each.  
Preset scanning  
cially useful when travelling, because it will You can have all of the stations stored in one  
alwaysgiveyouthemostpowerfulstationsat  
a finger tip as you pass through the various  
reception areas.  
wavebandscannedbyusingthePresetScan  
function. Choose the desired SCANTIME in  
the DSC menu.  
Select the waveband with the FMT or  
M•L button.  
Press FMT for approximately 2 sec.  
Briefly press PS.  
Select a station with the rocker switch  
All of the stations in that waveband will  
be scanned one after another.  
Theradiowillsearchforthesixmostpowerful  
FMstationsandstorethemontheTmemo-  
rybank(Travelstore). Whenthisprocesshas  
been completed, the radio will tune in the  
strongest station.  
FM stations can also be stored manually on  
the Travelstore memory bank (see “Storing  
stations“).  
(either automatically  
<< >>).  
/
or manually  
Depending on which memory bank has been  
activated for FM, all of the stations in either I,  
II or the Travelstore level will be scanned. If  
a preset is not in use, it is skipped.  
To stop the scan:  
Press the desired preset button and  
hold it down. The radio will be muted  
and resumes play after approximately 2  
seconds.  
Press the PS button once again.  
The radio will continue to play the cur-  
rently scanned station.  
Now the station has been stored. The activa-  
ted preset button is indicated in the display.  
35  
responding stations can be selected by seek POP MUSIC  
Scanning stations with Radio  
Scan  
tuning or with the scan function.  
ROCK MUSIC  
M.O.R. M (middle of the road music)  
LIGHT M (light classical)  
CLASSICS (serious classical)  
OTHER M (other music)  
Beginning with the station currently tuned in,  
you can scan the following stations. Choose  
the desired SCANTIME in the DSC menu.  
To activate the scan:  
Switching PTY on/off  
Press PTY.  
When the function is active, the display will  
briefly show the program type selected last;  
“PTY” is permanently indicated in the lower  
right corner of the display.  
PTY 16 to PTY 30 are not yet assigned.  
Press PS for about 2 seconds.  
Either the scanned frequency or the  
station name starts flashing in the dis-  
play. During the actual scan process,  
“SCAN” is flashing.  
Displaying the program type  
Press << or >>.  
Program types  
The program type selected last will be  
briefly displayed.  
To continue listening to a scanned stati-  
on/switch the scan off:  
Use << >> to let the system display the  
program type selected last and to choose a  
new one.  
Selecting a program type  
Briefly press PS.  
a) Using the preset buttons  
You can select stored PTYs with the preset  
buttons 1 - 6. For this it is necessary that the  
PTY function is activated.  
The program types listed below will then be  
available.  
If no station is selected during the scan, the  
scan function will be automatically switched  
off after the entire frequency band has been  
passed through. The radio will revert to the  
station the scan began from.  
If PTY is switched on, you can select  
the program types assigned at the fac-  
tory with preset buttons 1 - 6.  
If you would like to store other PTYs,  
read through chapter “DSC pro-  
gramming - PTY SET”.  
The letters printed in bold correspond to the  
actual PTY indication briefly displayed.  
For more information, please also refer to  
chapter “DSC programming - SCANTIME”.  
Press one of the buttons 1 - 6. The  
display shows the selected program  
type for three seconds.  
NEWS  
CURRENT AFFAIRS  
INFORMATION  
SPORT  
EDUCATE (education)  
DRAMA  
PTY Program Type  
PTY is an RDS service offered by more and  
more radio broadcasters. This feature allows  
you to select FM stations in accordance with  
their program type. As soon as you have  
chosen the PTY of your preference, the cor-  
Press  
/
while the PTY is display-  
ed: This will start seek tuning for a  
station offering the specified pro-  
gram type.  
CULTURE  
SCIENCE  
VARIED  
36  
b) Using the << >> rocker switch  
If PTY is switched on, you can select a  
program type via the << >> rocker  
switch.  
PTY priority  
Station naming  
When PTY is activated, the system will con-  
stantlysearchforthecorrespondingprogram  
type within the station network of the recei-  
ved program.  
If you listen to NDR2, for example, the set will  
alsosearchthroughtheotherNDRprograms  
tofindoutwhetherthereisaprogramoffering  
the desired PTY.  
During radio operation, as soon as such a  
program begins the unit will switch over to  
this program for the duration of the corre-  
sponding broadcast.  
During tape or CD operation, the system will  
release a BEEP and display the program  
type in order to let you know that a program  
offering the desired PTY has started.  
Using the ST NAME item of the DSC menu  
you can enter a name with a maximum of 8  
digits for all stored frequencies of memory  
banks I and II.  
MostoftheFMstationsareRDSstations, the  
names of which will be shown in the display.  
ThedisplayedRDSnamehaspriorityoverall  
entries specified by the user. If you have  
namedanRDSstation, thisnamewillonlybe  
shown briefly and be replaced by the RDS  
name afterwards.  
For this reason we recommend that you only  
name non-RDS stations, which only show  
their frequency but not the name.  
All long-wave stations are provided with a  
station name at the factory.  
Press << or >>. The PTY selected  
last will be displayed for three se-  
conds.  
During this period choose the desi-  
red program type with << (back-  
wards) or >> (forwards direction).  
Press << or >> as many times as  
required.  
Tuning into a station with PTY  
You may let the system find you the stations  
offering the adjusted program type using the  
seek tuning rocker switch or the PS (SCAN)  
button.  
Precondition: “PTY” must be illuminated on  
the display.  
If you wish to listen to this program,  
press SRC to switch to radio operation.  
To start your entry:  
Choose a station,  
Note:  
press DSC,  
Press <<>> or PS.  
As mentioned before, the PTY function is  
presently not available with all RDS stations.  
select item “ST NAME” with rocker  
Seek tuning will stop at the first station offe-  
ring the desired PTY.  
switch  
/
and  
If you have pressed PS (SCAN), the stations  
received will be scanned once until you  
switch SCAN off again (press PS once  
again).  
press -dB.  
The first position is flashing.  
Now select a character with rocker  
switch / .  
You have the choice between the capital  
letters (A-Z), special characters and the  
numbers (0-9).  
37  
Reception of traffic announcements with RDS-EON  
Use the rocker switch << >> to move to  
the next position and select a charac-  
ter.  
Warning beep  
(Enhanced Other Networks)  
Many FM broadcasters provide their service  
area with traffic messages at regular inter-  
vals.  
All traffic program stations transmit a special  
telegram signal alongside their programs,  
which is recognised and decoded by the car  
radio.  
As soon as such a signal is received, the  
display shows “TP” (Traffic Program).  
Other radio stations do not actually air traffic  
announcements themselves, but by using  
RDS-EON they make it possible to receive  
the traffic announcements of another station  
within the same radio network. In this case,  
TP” will light up in the display as soon as the  
priority for traffic announcements is activa-  
ted. The display must then show “TA”.  
If a traffic announcement is broadcast, the  
radio will automatically switch to the linked  
traffic program for the duration of the messa-  
geandreturntotheoriginalprogramafterthe  
end of the message.  
If you leave the reception area of the traffic  
programstationyouarecurrentlylisteningto,  
you will hear a warning beep after approxi-  
mately 30 seconds.  
Thiswarningbeepwillalsobereleasedwhen  
pressing a preset without a traffic program.  
In this way, up to 8 characters can be en-  
tered.  
Once you have completed the name as desi-  
red,  
press -dB;  
now the entry has been stored.  
Switching the warning beep off  
The display returns to “ST NAME”.  
a) Tune to another traffic program station:  
Press the rocker switch, or  
To name the next station:  
Select it with one of the preset buttons  
(1-6); if required, change the memory  
bank and/or waveband.  
press a preset button with a station  
offering traffic information.  
Alternative:  
Then start to enter the next name.  
b) Switch off the priority for traffic an-  
nouncements:  
To finish the entry,  
Press TIM > 2 sec.  
In the display, the “TA” indication  
goes out.  
press DSC.  
You will leave the DSC menu at the  
same time.  
You can reduce the beep tone volume to  
the pre-selected mute volume.  
Any name entered for a preset station will be  
deleted by re-assigning it (either with a name  
or frequency).  
For this purpose, press -dB.  
Traffic announcement priority  
on/off  
If the priority for traffic announcements is  
activated, “TA” will appear in the display. To  
switch the function on/off:  
Press the TIM button > 2 sec.  
38  
Traffic Memo (TIM)  
This set is equipped with a digital speech  
memory, allowing up to 4 traffic messages  
lasting a maximum of 4 minutes to be auto-  
matically recorded.  
As soon as “TP” is displayed, the system will  
record all incoming traffic announcements of  
the adjusted station.  
If the priority for traffic announcements is  
activated (“TA” lights up in the display), the  
setwillalsorecordthetrafficmessagesofthe  
traffic station program within the same radio  
network (see also “Reception of traffic an-  
nouncements with RDS-EON”).  
Depending on the length of the new traffic  
bulletin, the oldest messages will be deleted.  
If a message is longer than four minutes, the  
system will display OVERFLOW after four  
minutesofplayback,andreleaseabeeptone  
to indicate that the message could only be  
recorded partially.  
Recalling stored traffic announcements  
Press the TIM button briefly.  
Automatic seek tuning start  
Prerequisite:  
The display for example shows: NDR2 (sta-  
tion name or frequency), then briefly  
T4 14.30 (T4 = traffic message 4, recorded  
at 14:30). If four traffic messages were recor-  
ded, then “T4” always represents the most  
recent announcement, which will also be  
played first.  
The priority for traffic announcements is ac-  
tivated.Ifyouleavethereceptionareaofyour  
traffic program while listening to a tape or  
disc or when having turned down the volume  
completely, the car radio will automatically  
tune into another traffic program station.  
If no such traffic program station is found  
within approximately 30 seconds, tape or  
disc reproduction will be interrupted and the  
system will release a warning beep. To  
switch the beep off, proceed as described  
above.  
Usethe  
T1 and T4.  
Hold down the  
/
rockerbuttontoswitchbetween  
/
rocker button to move  
through the message in forwards/backwards  
direction quickly.  
Press << to go back to the beginning of the  
currently played message.  
The TIM function is switched off by either  
pressing TIM or >>.  
Adjusting the traffic message  
volume  
The volume of the warning beep and of the  
current traffic message was pre-adjusted at  
the factory. If you would like to alter the  
setting, proceed as described under “DSC  
programming - TA LEVEL”.  
TIM standby mode when the radio is  
turned off  
Warning  
With this system it is possible to record inco-  
ming traffic announcements automatically at  
pre-determined times when the radio is tur-  
ned off.  
You may then recall such messages as des-  
cribed above.  
The motor antenna could be damaged in  
a car wash.  
If you have installed a motor antenna, then  
please take into account the corresponding  
warning note at the end of this chapter.  
If you press the TIM button while a traffic  
announcement is being played (TA lit up in  
thedisplay), therecordingwillbeinterrupted.  
39  
When pressing TIM once again, you will hear  
themessagetextrecordeduntilthatinterrup-  
tion.  
Deactivating the TIM standby mode  
adjusted  
TIM-TIME  
Press DSC with the radio being turned  
on.  
start  
end  
1.5 hours  
1.5 hours  
Use the  
/
rocker button to select the  
The motor antenna  
will be extracted  
Setting the time in the DSC menu:  
item TIM TIME.  
TIM needs the exact time in order to operate  
precisely.Thetimealsohastobere-adjusted  
after every interruption of the power supply.  
Press -dB and switch to TIM OFF with  
Use the rocker button  
TIM-TIME in the DSC menu.  
/
to choose  
rocker button  
/
(you find this item  
between the time settings for 23:00 and  
0:00).  
Press DSC and the time will be display-  
Press << or >> to call up the adjusted  
time.  
If TIM OFF is displayed, the TIM  
function is deactivated.  
ed.  
When TIM OFF is flashing,  
press DSC or -dB.  
Press << to set the hours or >> to ad-  
just the minutes.  
If the motor antenna is retracted immediately  
after selecting TIM OFF, you can be assured  
that the TIM function is deactivated.  
Note:  
If the TIM function is not used for a longer  
period of time, we recommend you to switch  
it off in order to avoid that the battery goes  
flat.  
The corresponding value is flashing.  
To change the setting,  
Use the rocker button  
time.  
/
to set the  
press the rocker button / .  
To confirm your entry,  
press -dB or DSC.  
Use << to move to the hours or >> to  
adjust the minutes.  
Confirm your entry by  
pressing -dB or DSC.  
When pressing the -dB button, you can go on  
working in the DSC menu immediately.  
The TIM-TIME is stored.  
TIM will be active 1.5 hours before and after  
the adjusted TIM-TIME.  
Also, TIM will automatically stay on standby  
for three hours after the radio was turned off.  
When TIM is activated, the display will briefly  
show “TIM ON” when the set is switched off.  
Adjusting the TIM standby mode/TIM  
time  
Warning  
The motor antenna could be damaged in  
a car wash.  
The TIM-TIME to be set corresponds to the  
planned departure time. TIM will then be  
active 1.5 hours before and after this adju-  
sted time, so that the traffic messages will be  
recorded during a period of three hours.  
Note:Duringthisperiod, amotorantennawill  
remain extracted. Please take into account  
the warning note of the end of this chapter.  
If you have a motor antenna installed, it will  
remain extracted after you have turned off  
the radio with the TIM function being activa-  
ted. The antenna may also be extracted in  
the car wash when the set is turned off and  
the TIM function activated.  
40  
TIM is deactivated (TIM OFF), if the For this purpose:  
When activating RT with the ignition being  
switched on, the message “NO TEXT” will  
appear in the display.  
motor antenna is retracted as soon as  
the set is turned off.  
You can now drive through a car wash  
when the radio is off.  
Press DSC with the radio being activa-  
ted.  
Use the  
/
rocker button to select the  
To read radiotext messages, proceed as  
follows:  
Park the vehicle in a suitable place and turn  
off the ignition. The radio will be switched off  
automatically.  
item TIM TIME.  
Do not switch on the radio until you have left  
the car wash.  
If the display shows TIM ON when switching  
off the radio, then the TIM timer is activated.  
The motor antenna will remain extracted.  
If you are sure,  
that now and while being in the car wash you  
are outside the recording period around the  
adjusted TIM-TIME:  
Press -dB and switch to TIM OFF with  
rocker button  
between the time settings for 23:00 and  
0:00).  
/
(you find this item  
In order to re-activate the car radio,  
press the ON button for about 1 se-  
cond.  
If you now turn off the radio, the anten-  
na will be retracted.  
You can now drive into the car wash. After  
you have left the car wash, you may re-  
activate the TIM function according to your  
preference.  
Select a station and press RT.  
It takes some time until the aired messages  
are fully available in the system. In the mean-  
time, the radio will display the message  
“WAIT”.  
Afterwards, the text will be displayed.  
Iftheadjustedstationdoesnotprovideradio-  
text information, the message “NO TEXT” is  
displayed.  
adjusted  
start  
TIM-TIME  
end  
RT – Radiotext  
1.5 hours  
1.5 hours  
Radiotext is an RDS feature used by the  
broadcasters to transmit texts.  
The motor antenna  
will be extracted  
The texts can be displayed in two subse-  
quent lines with a maximum of 64 characters  
each, which are moved through the display  
Switch off the radio and press TIM.  
The display briefly shows STBY OFF.  
To switch off radiotext:  
Press the RT button once again.  
The antenna will then remain retracted when slowly.  
the radio is turned off (until the three-hour Depending on the individual broadcaster,  
recording period starts).  
Attention:  
You should by all means deactivate the  
these texts can be of a different nature, for  
example brief news, program information,  
commercial broadcasts, etc.  
TIM timer (TIM OFF), if the adjusted re- Forsafetyreasons,theradiotextfunctioncan  
cording period is soon to start. only be used if the ignition is switched off.  
41  
Tape operation  
For this purpose,  
Fast forward/rewind  
In order to play a tape, the car radio has to be  
switched on.  
press the rocker switch as many times  
as required.  
Press >> to fast forward a tape (FF).  
The unit automatically switches to tape ope-  
ration when a cassette is inserted.  
Press << to fast rewind a tape. (FR)  
The display will show you the number of titles  
to be skipped.  
Correct your entry by pressing the opposite  
button.  
CPS  
Select title in  
forwards direction  
Inserting a tape  
Press  
to stop the tape immediately.  
Turn on the set.  
Insert the cassette.  
For CPS operation it is necessary that there  
is a blank section of at least 3 seconds  
between the titles.  
The cassette is automatically transported to  
theplaybackposition.Thesystemthenstarts  
to play back side A or 1.  
During tape operation, the display shows  
TR1 or TR2 (=track)  
Fast  
rewind  
Fast  
forward  
Autoreverse  
To switch sides while playing a cassette,  
press  
.
CPS  
Select title in  
backwards direction  
At the end of a side the unit will automatically  
switchover.ThedisplayshowsTR1forside  
1 or “TR2” for side 2.  
Insert cassette with side A o 1  
facing up, the open side facing  
to the right  
Eject  
cassette  
To stop the function:  
Press the opposite button.  
<< >> or / .  
Note:  
Ifthereistoomuchtensiononthetapeduring  
playback, the set may switch over by itself. In  
this case check the condition of the tape.  
Sometimes it helps to rewind the cassette  
tape completely.  
Selecting titles with CPS  
(Cassette Program Search)  
Removing a tape  
Use this function to repeat or skip cassette  
titles with buttons (forwards) or (back-  
wards).  
Press  
.
Tape type detection  
The cassette will eject.  
Correct equalization is automatically selec-  
ted according to the tape used.  
The system allows you to skip up to 9 titles.  
42  
Scanning cassette titles with  
SCAN  
Skipping unrecorded tape sec-  
tions with BLS - Blank Skip  
Care of your audio equipment  
We recommend that you use only C-60/C-90  
cassette tapes in your car radio. Store your  
cassettes in a cool place away from dirt, dust  
and temperatures exceeding 50 °C. During  
cold weather, allow very cold cassettes to  
warm up before playing them in order to  
avoid uneven tape transport. Operating pro-  
blems and sound distortions may occur after  
approximately 100 hours of playing time and  
are caused by dust particles which adhere to  
the rubber roller and the audio head.  
Use a cleaner cassette to remove normal dirt  
build-up. For tougher cases, use a cotton  
swab (Q-tip) soaked with alcohol. Do not  
attempt to clean the mechanism by inserting  
a hard object into the player!  
You can have the cassette titles played As soon as the system detects a blank tape  
briefly by using the scan func tion. If you like section of more than 15 seconds, the casset-  
a title, stop the scan to continue listening to te will automatically be fast forwarded to the  
that track.  
To start/stop the scan:  
beginning of the next track.  
The display will then show “CPS-FF”.  
To switch BLS on/off:  
Press PS briefly.  
Press BLS.  
Choose the desired SCANTIME in the DSC  
menu.  
If the function is active, “BLS” appears in the  
display.  
Dolby B•C NR*  
Listening to the radio during fast  
winding with RM (Radio Monitor)  
Use this button to play tapes recorded with  
Dolby noise reduction.  
Dolby-C NR is a further development of Dol-  
by-B NR and reduces the unwanted tape  
noise even more.  
Press B•C to adjust to the type of Dolby NR  
inwhichthetapewasrecordedortodisenga-  
ge Dolby NR. When Dolby is active, the  
corresponding indicator “B” or “C” will light  
up.  
When the tape is fast forwarded or rewound  
(also with CPS, SCAN, BLS), the radio is  
normally muted. To listen to the radio during  
fast winding:  
Press RM.  
“RM” lights up in the display.  
*
Noise reduction system manufactured under license  
from Dolby Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby Laboratories.  
43  
DSC programming  
Using DSC (Direct Software Control), you  
can adjust certain settings and functions for  
thiscarradiotoyourownlikingandthenstore  
them.  
The basic settings for this audio equipment  
have been made at the factory. Please refer  
tothefollowingoverviewforthesesettingsso  
that you can always reset to these if desired.  
If you wish to alter any of the programming,  
TIME  
The current time will be dis-  
played, or it has to be adju-  
sted.  
Use the rocker button << >>  
to select the hours or minu-  
Test  
If the antenna signal intensi-  
ty between ANT(enna) 1 and  
ANT 2 still varies strongly  
even after having changed  
the vehicle position (by  
metres), you should have the  
antenna furnishing the wea-  
ker signal checked.  
tes (flashing), and the  
/
switch to set the time. Start  
with -dB. The precise time  
setting is required for the  
proper operation of TIM.  
press button DSC.  
ADA ON/OFF  
Use the rocker switch and the -dB button to  
make your selection from the following  
functions and to carry out the desired adjust-  
ments. The current setting for that function  
will appear in the display.  
Normal setting: ADA ON.  
If only one antenna is con-  
nected, you should adjust  
ADA OFF.  
CDC NAME (only if changer is connec-  
ted)  
Use this function to name  
your discs (see also CD  
changer control, “Entering/  
displaying CD names“)  
ANGLE  
Use one of the values -1, 0,  
or +1 to adapt the individual  
viewing angle.  
Select function  
ADA  
To switch the ADA system  
on/off and to test the anten-  
nas.  
Adjust the ANGLE so as to  
provide the best view.  
Set  
Set  
value  
value  
Use the <<>> rocker switch  
to activate one of the follo-  
wing modes: ADA OFF, ANT  
1 X, ANT 2 X, ADA ON X.  
The “X” stands for a number  
between 0 and 9, depending  
on the intensity of the anten-  
na signal.  
BAS F=R  
TRE F=R  
To distribute the bass level  
among the front and rear  
speakers between +6 dB  
front and +6 dB rear.  
Select function  
To distribute the treble level  
among the front and rear  
speakers between +6 dB  
front and +6 dB rear.  
44  
BEEP  
This sound will confirm  
functions which are comple-  
ted by pressing a button for  
longer than 2 seconds.  
Adjust volume between 0  
and 9 (0 = OFF).  
CDC DISP  
(only if changer is connec-  
ted)  
During CD operation, use  
<<>> to select between the  
following displays:  
PTY LANG Use this function to select  
the language for the PTY  
indications in the display.  
Choose between DEUTSCH  
or ENGLISH.  
NAME -  
the CD name specified with  
CDC NAME  
PTY SET  
Use this function to change  
the default allocations of the  
preset buttons.  
Press the preset button to be  
changed. Use the rocker  
switch <</>> to select the  
desired program type and  
press the preset button once  
again.  
BRIGHT  
You can adjust the display  
brightness from values bet-  
ween 1 and 16. You can also  
select one day and one night  
adjustment.  
TIME -  
the playback time  
NUMBER -  
the CD or track number  
Selecting the night bright-  
ness:  
LED ON  
You can select between LED  
ON and LED OFF. When  
setting LED ON, the Key-  
Card tongue will flash for  
additional optical theft pro-  
tection when the set has  
been switched off and the  
KeyCard removed.  
Switch on the vehicle’s light-  
ing system and program the  
brightness value. The audio  
equipment must be connec-  
ted with the vehicle lighting  
for this to function properly.  
SCANTIME Use this function to specify  
the scan time for the radio or  
cassette mode from between  
5 and 30 seconds.  
COLOUR  
Step-by-step adjustment of  
the display colour.  
S-DX 1  
Use this function to adjust  
the seek tuning sensitivity for  
distant reception.  
DX. 1 - high sensitivity  
DX. 3 - low sensitivity  
LOUDNESS When listening at a low level,  
the loudness function will  
create a more natural sound  
by emphasizing the low fre-  
quency range.  
G................. II ................ R  
green  
red  
LOUD 1 - low boost  
LOUD 6 - strong boost  
45  
S-LO 1  
Use this function to adjust  
the seek tuning sensitivity for  
local reception.  
LO 1 - high sensitivity  
LO 3 - low sensitivity  
The seek tuning sensitivity  
values can be separately  
adjusted for AM and FM.  
TIM TIME  
CDC UPD  
To adjust the TIM time.  
To activate/deactivate TIM.  
For more information, see  
chapter “Traffic Memo (TIM),  
Adjusting the TIM standby  
mode).  
(only if changer is connec-  
ted)  
SPEECH  
In future many RDS broad-  
casters will differentiate bet-  
ween music and speech  
programs. Use the SPEECH  
function to separately adjust  
the sound settings for  
Use this function to delete  
disc names in order to get  
new memory capacities for  
other CD names (see also  
CD changer control, “Dele-  
ting CD names“)  
speech programs.  
VOL FIX  
Use this function to adjust  
the initial volume when the  
set is switched on.  
ST NAME  
With this function you can  
name any preset radio stati-  
on with a character se-  
quence of up to 8 digits (see  
“Station naming“).  
Use <<>> to adjust the desi-  
red initial volume.  
To quit the DSC mode and store the set-  
ting:  
TA LEVEL Use this function to adjust  
the volume for the traffic  
announcements and the  
warning beep from between  
1 and 9.  
Press DSC.  
The announcement will then  
be broadcast at this volume.  
46  
CD changer control (option)  
This car radio allows it to remote control one  
of the following Blaupunkt CD changers:  
CDC-A03, -F03, -A05, -F05.  
To stop the scan:  
Selecting a CD/track using the  
rocker switch  
Press PS briefly. The radio will continue  
to play the title scanned last.  
Selecting a track (upwards): Press briefly  
CUE - fast advance (audible):  
Press and hold down  
Switching the CD mode on  
using SRC of the car radio  
MIX  
Use this function for playing the CD tracks at  
random.  
Be sure that a CD magazine is inserted in the  
changer. Use the SRC button to change the  
audio source (radio - changer - cassette).  
MIX CD – The tracks of the selected CD  
are played at random. The fol-  
lowing CDs are selected in nu-  
meric order. Their tracks will  
also be played at random.  
MIX MAG – All tracks of the CD magazine  
are played at random.  
MIX OFF – MIX is switched off. The tracks  
are played in numeric order.  
Select disc  
Select disc  
(upwards)  
Press SRC until the changer functions ap- (downwards)  
pear in the display.  
First, “CD ON” is displayed briefly, then for  
example  
CD1 -T1  
Repeating a track: Press briefly  
Selecting a track (downwards):  
Briefly press twice or more  
REVIEW - fast reverse (audible):  
CD = disc, T = track  
Press and hold down  
CD no.  
Track no.  
To change the MIX mode:  
Press MIX until the desired mode is  
briefly shown in the display.  
The display shows the selected mode.  
If MIX is on, “MIX” will appear in the lower  
right corner of the display.  
SCAN  
The display mode name/time or number can  
be selected under CDC-DISP in the DSC  
menu.  
Use this function for briefly sampling the CD  
tracks.  
To start the scan:  
Press PS on the car radio for approxi-  
mately 1 sec. The tracks will be briefly  
played in ascending order.  
47  
To finish the entry:  
Press <<>> and “LOAD CD” is display-  
ed.  
Entering/displaying CD names  
Press -dB. The entry is stored and you  
can now select another DSC function  
using the rocker switch / .  
Withthissystemyoucannameupto99CDs.  
WhenplayingaCD, thedisplaywillthengive  
you the entered name, for example  
After having read in the CDs of this magazi-  
ne, “NEXT MAG” appears in the display.  
Alternatively:  
Press DSC. The entry is stored and the  
DSC mode is automatically quit.  
To store the entry/choose the next CD:  
Press the EJECT button on the CD  
changer and insert the next magazine.  
“VIVALDI”.  
Precondition: NAME must be selected under  
DSC - CD DISP.  
Repeat these steps for all CDs, the names of  
which you wish to maintain.  
To enter the name:  
To finish your entry, press -dB for  
about 2 sec. until “UPDATING” is dis-  
played. The updating process is com-  
pleted when the display shows  
“READY”.  
Press -dB and select the next CD to be  
named using <<>>.  
First, switch off the priority for traffic an-  
nouncements. Otherwise the entry will be  
deleted if an announcement is broadcast.  
Press the TA button to switch the “TA” dis-  
play off.  
Press -dB and enter a name.  
Any specified name will be deleted by re-  
assigning it with a new CD name.  
The names of all CDs inserted in the maga-  
zine remain stored in the memory. The other  
CD names have been deleted.  
You can interrupt this process by pressing  
DSC.  
Be sure that at least one CD is inserted in the  
CD magazine.  
Deleting CD names  
Press SRC to change to CDC.  
If you try to store more than 99 CD names,  
“FULL” will be shown in the display. In this  
case you can use DSC to delete the name of  
one or more CDs in order to get new memory  
capacity.  
Use the CDC-UPD function to confirm all  
CDs, the names of which you wish to main-  
tain. All the other names will be deleted.  
Press DSC.  
Press the rocker switch  
NAME” is displayed.  
/
until “CD  
Press the -dB button.  
The first character position is flashing.  
Use the rocker switch  
/
to enter the  
first letter, special character or digit  
from 0-9.  
Press DSC.  
Insert a magazine with the CDs, the  
names of which you wish to maintain.  
Use the rocker switch <<>> to change  
to the next position and select a cha-  
racter.  
Press  
ed.  
/
until “CDC UPD” is display-  
Each name may have up to 7 characters.  
48  
Appendix  
Survey of DSC default settings  
Technical data  
TIME  
ADA  
00:00  
ON  
0
Amplifier:  
Output power:  
4 x 20 watts RMS acc.  
to DIN 45 324  
ANGLE  
4 x 25 watts music  
power acc. to  
DIN 45 324  
BAS  
F=R  
TRE  
F=R  
BEEP  
4
BRIGHT  
COLOUR  
CDC DISP  
LED  
16  
FM sensitivity:  
0.7 µV at 26 dB  
S/N ratio  
Medium position (orange)  
NAME  
Frequency response:  
FM  
ON  
35 - 16,000 Hz (-3 dB)  
30 - 18,000 Hz (-3 dB)  
LOUDNESS  
PTY LANG  
PTY SET  
SCANTIME  
S - DX  
3
Tape (metal)  
DEUTSCH  
NACHRICH (TEN)  
10s  
1
S - LO  
1
SPEECH  
TA LEVEL  
TIM TIME  
VOL FIX  
0
5
07:00  
26  
We reserve the right to make changes!  
49  
Blaupunkt-Werke GmbH  
Bosch Gruppe  
1/95  
K7/VKD 3 D94 147 028  
PM  

Atlantis Land I See S150 LCD Monitor A05 15AM C01 User Manual
Bushnell Binoculars 11 0832 User Manual
Bushnell Binoculars 260140 User Manual
Camco VORTEX 4 User Manual
Canon SPEEDLIGHT 550EX User Manual
Casio s v p a m fx 270MS User Manual
Casio TE 100 User Manual
Citizen Calculator CT 666N User Manual
Cuisinart Smart Stick CSB 76 User Manual
JVC Camcorder TK C720U User Manual