Radio / CD
Tokyo RDM 169
Operating instructions
Manuel d’utilisation
Instrucciones de manejo
Instrução de serviço
Installation instructions
Instructions de montage
Instrucciones de montaje
Instruções de montagem
Table of contents
Quick Reference ............................ 4 Changing the memory bank ................. 17 TPM (Track Program Memory)............. 24
Storing stations ..................................... 17
Automatically storing the strongest
stations with Travelstore....................... 18
Storing tracks with TPM .................... 25
Switching TPM playback on/off......... 25
Deleting the TPM .............................. 25
Steering wheel remote control ... 11
Important notes............................ 12
Recalling stored stations ...................... 18 MIX........................................................ 25
Scanning stored stations with Preset To alter the setting: ............................... 25
Scan ...................................................... 18 SCAN .................................................... 26
Scanning stations with Radio Scan ...... 19 Entering CD names .............................. 26
Changing the scan time........................ 19 Deleting CD names/TPM with DSC
Selecting the seek tuning sensitivity .... 19 UPDATE ............................................... 26
What you need to know ........................ 12
Traffic safety ......................................... 12
Installation............................................. 12
Telephone mute.................................... 12
Accessories .......................................... 12
Guarantee/warranty .............................. 12
International telephone information ...... 12
Switching from stereo to mono (FM) .... 19
Automatic bandwidth adjustment
Clock - Time.................................. 27
Setting the clock ................................... 27
(SHARX) ............................................... 19
Displaying the clock .............................. 27
PTY - Program Type............................. 20
Correcting the clock after the power
Program type ........................................ 20
has been disconnected......................... 27
Checking the program type of the
KeyCard theft protection system 13
Putting the unit into operation .............. 13
Removing the KeyCard ........................ 13
“Training” a KeyCard/Replacing a
KeyCard ................................................ 13
Displaying the radio data ...................... 14
Short Additional Memory (S.A.M.)........ 14
Optical display as theft protection ........ 14
Care of your KeyCard ........................... 14
Lost or damaged KeyCard ................... 14
Deactivating the hour correction
station ................................................ 20
function ................................................. 27
Displaying the selected program type .. 20
Selecting a program type .................. 20
Setting the equalizer.................... 28
Storing program types ....................... 21
Scanning stations with PTY SCAN ... 21
PTY priority........................................ 22
Notes on making the settings ............... 28
Assistance in setting your equalizer ..... 29
DSC programming ....................... 30
Overview of the DSC factory settings .. 33
Specifications............................... 33
Selecting the operating mode .... 15
Optimizing display legibility ....... 15
Radio operation with RDS........... 16
CD operation / CD changer
operation....................................... 23
Inserting a CD ....................................... 23
Removing a CD .................................... 23
Switching on CD operation ................... 23
Switching on CD changer operation..... 23
Selecting the display mode .................. 24
Selecting CDs and titles ....................... 24
Repeating tracks/CDs........................... 24
Amplifier ................................................ 33
Tuner..................................................... 33
CD player .............................................. 33
Activating/deactivating the RDS ........... 16
AF - Alternative frequency .................... 16
Selecting a band ................................... 16
Station tuning ........................................ 17
Scrolling through the broadcasting
Glossary........................................ 34
Index.............................................. 35
Installation instructions ............ 138
networks (FM only) ............................... 17
3
Quick Reference
2 ON
Switching the unit on:
Switching the unit on/off with the
KeyCard:
1 Unlocking the fold-down operating
panel
With the KeyCard inserted, press ON
briefly.
The unit will begin to play in the oper-
ating mode selected last at the pre-set
volume.
The unit switches on or off when the
KeyCard is inserted or removed.
Refer to section @ in the Quick Refer-
ence on the KeyCard theft protection
system.
It is possible to insert or remove the
KeyCard and the CD when the operat-
ing panel is unlocked.
To unlock the panel press 1, the op-
erating panel will fold down. The oper-
ating panel cannot be removed. Do not
use the panel as a rest or shelf.
To lock the panel, push it back into its
starting position (arrow 3).
Switching the unit on/off with the
ignition:
If the unit has been connected accord-
ingly, it can be switched on and off
with the car ignition.
After you switch off the ignition, a dou-
ble beep will sound to remind you to
remove the KeyCard and take it with
you.
To switch off the unit:
Press ON for approx. 1 second.
The viewing angle of the display can
be adjusted individually to ensure opti-
mum legibility. If necessary, refer to
the section on “Optimizing the display
legibility”.
1
Switching the unit on with the igni-
tion switched off:
After you have switched off the ignition
(KeyCard is inserted in the unit), you
can continue to operate the unit as fol-
lows:
3
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
Switching the sound on/off:
Press ON briefly. When the sound has
been switched off, “MUTE” will appear
in the display.
After the double beep press ON.
The unit will switch on.
When you leave the vehicle, un-
lock the panel and remove the
KeyCard to protect the equipment
against theft.
After the unit has played for an hour it
will switch off automatically to prevent
the car battery from running down.
The sound can be switched on again
by turning the volume knob 3.
4
Quick Reference
3 Adjusting the volume
Turn the knob to adjust the volume as
desired.
Menu level 1
Station keys and memory levels
Menu level 2
Adjusting the radio functions
The volume level selected will appear
in the display. When the unit is
switched on, it will automatically play
at the pre-set volume (ON VOL).
It is possible to adjust the ON VOL (re-
fer to “DSC programming - ON VOL”).
NEXT - FM
NEXT - FM
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM and AMT
memory banks.
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM banks AM
and AMT.
ST1 - ST6
BND
4 Softkeys / Display
On this memory level it is possible to
store radio stations on the FM levels I, II
and “T” on the keys marked ST1 to ST6.
6 stations each can be stored for the
AM banks AM and AMT.
Selects the band and memory level
(FM I, FM II, FM T, AM, AMT).
Softkey = key with different functions
The functions which appear in the dis-
play can be selected.
SCA - Scan
a) PTY is switched off
Radio operation
Storing a radio station - Press one of
the station keys from ST1 to ST6 until
it is possible to hear the program again
(beep).
Recalling a radio station - Select the
desired band. Press NEXT to select
the memory level required and press
the corresponding station key briefly.
(lettering is lit normally, not highlighted
in the display)
While listening to the radio you can
press TU to switch between menu lev-
el 1 and menu level 2.
The unit will return to menu level 1 au-
tomatically 8 seconds after the last key
is pressed.
Press SCA briefly (Radio Scan) -
“SCAN” will flash in the display alter-
nately with the abbreviation for the sta-
tion being scanned. All of the radio
stations within reception range will be
scanned.
5
Quick Reference
Press SCA for approx. 1 second
(Preset Scan) -
“PTY” must be highlighted in the dis-
play (press PTY if necessary).
Now it is possible to select a program
type and store it on one of the station
keys.
Press << >> to activate the PTY pro-
gram types and press the station keys
to store them (press the key for ap-
prox. 2 seconds, until you hear a
beep).
frequency with better reception for the
station you are tuned into.
You will hear a beep and “SCAN” will
flash in the display alternately with the
abbreviation for the station being
scanned. The radio stations which
have been stored on the station keys
and which are currently within recep-
tion range will be scanned.
AF on/off: Press TU to select menu
level 2 and press AF longer than 2
seconds until you hear a beep.
RDS on/off: Press TU to select menu
level 2 and press AF briefly.
EXIT
Press this key briefly to end or cancel
an adjustment.
Stopping Radio Scan / Preset Scan:
Press SCA or the rocker switch once
again.
CD and changer operation
ENT (Enter)
Press this key briefly to accept or store
an adjustment.
b) PTY is switched on
(lettering is highlighted in the display)
TS (Travelstore)
If you press TS, the radio will switch to
FMT or AMT from any other bank. The
six stations with the strongest recep-
tion will be stored automatically. After
the stations have been stored, the ra-
dio will tune into the station with the
best reception and begin to play.
Use the corresponding softkeys to se-
lect MIX, SCAN, RPT (Repeat) and
TPM in CD and changer operation.
Press SCA -
MIX
the stations broadcasting the pro-
grams for the PTY program type se-
lected will be scanned.
CD tracks will be played in random or-
der.
Press the MIX key to select the follow-
ing functions:
PTY
(Program Type)
With PTY the station keys become pro-
gram type keys.
AF (Alternative Frequency for RDS
operation)
If “AF” is highlighted in the display, the
radio will automatically search for a
6
Quick Reference
- MIX CD = the tracks on the CD will
be played in random order.
- REP TRCK = Repeat track
- REP CD = Repeat CD (for changer
operation only)
6 Rocker switch
Radio operation
If you are using a CD changer, the
CDs will be selected in numerical or-
der and the tracks in random order.
- MIX MAG (for changer operation
only) = all of the tracks on all of the
CDs in the magazine will be played
in random order.
If you press the rocker switch when the
unit is on menu level 2, it will automati-
cally return to menu level 1.
- RPT OFF = switches the function off
TPM - Track Program Memory
To store and play your favorite tracks
in CD or changer operation. Up to 30
CDs for the CD drive and up to 99 CDs
in the CD changer can be stored in the
system with a maximum of 40 tracks
each. (See the section on “TPM - Pro-
gramming”)
- MIX OFF = switches the function off.
SCA - Scan
Scans the tracks (the tracks of all the
CDs for changer operation).
/
Station seek tuning
up
down
CLR
Start Scan:
To clear the TPM memory. (See the
section on “TPM - Deleting the memo-
ry”)
<< / >> down/up in short intervals
(for FM only when AF and PTY are
switched off)
Press SCA. The tracks will be scanned
in ascending order one after the other.
The scan time can be adjusted (see
“DSC programming - SCANTIME”).
5 TA
For FM only:
<< / >> Pages through the station chain
with AF on and PTY off
To activate/deactivate the RDS func-
tion.
Stop Scan:
Press SCA. The track scanned last will
begin to play.
e.g.: NDR 1, 2, 3, 4, ...
RPT - Repeat
CD tracks or CDs in the CD changer
can be repeated as often as desired.
Press the RPT key to select one of the
following functions:
7
Quick Reference
CD and changer operation
7 DSC (Direct Software Control)
Using DSC it is possible to adjust the
programmable basic settings and
equalizer settings.
Use << / >> to select the different
modes.
Use
/
to make the corresponding
settings.
Further information: “DSC program-
ming” and "Setting the equalizer".
The settings selected will appear in the
display. The setting selected last will
be stored automatically.
8 AUD
<< / >> Select CD (for changer operation
Special Loudness feature:
Adjusts treble, bass, balance (left/
right), fader (front/rear) and loudness.
Loudness = Boosts low frequency for
more bass and a better adjustment to
the human ear.
only)
Press
/
to select the setting from
>>
<<
up: Press briefly
down: Press briefly
LOUD 6 to LOUD OFF.
Switching off AUD:
Press EXIT or AUD.
If you do not alter any of the settings,
AUD will switch off automatically after
8 seconds.
/
Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly
briefly
For FM, AM, CD and AUX it is possible
to store different treble, bass and loud-
ness settings.
How to make the settings:
Select the operating mode.
Press AUD once, “BASS” and the level
currently selected will appear in the
display.
To restart the track: Press briefly
REVIEW - fast reverse (audible):
Hold pressed down
Additional functions for the rocker
switch:
Other adjustments are possible with
AUD
DSC-MODE
PTY
8
7
DPE
as long as the corresponding function
is activated.
8
Quick Reference
9 DIS
Changer operation
Selects different display modes.
Press DIS briefly:
- CD number, track number, clock
- CD number, track number, time
played
Radio operation
Press DIS briefly:
- Name of the current radio station
- Current frequency
- CD name, track number
TRACK 13 - CD track number
or
VIVALDI - CD name
or
CD 5 T 2 - CD number and track number
(changer operation)
- PTY code
: Display
This will not work properly unless the
radio is able to receive an RDS station
in adequate reception quality.
MIX
- CD tracks can be played in
random order
SCA
RPT
- CD tracks are being scanned
- Repeat function for CD/
changer operation
- Store and play favorite CD
tracks
NDR2
FM
I, II, T
- station name
- band
- memory level I, II or Travel-
store
- AM band
TPM
CLR
- Delete TPM memory
Press DIS for approx. 2 seconds:
Display will alternate between the
clock and the band (incl. the memory
level).
M
MT
PTY
AF
- AM memory level Travelstore
- Program type is activated
- Alternative frequency for
RDS
CD operation
lo
- Seek tuning sensitivity ad-
justable with DSC
- Equalizer is switched on
- CD is inserted in the unit
Press DIS briefly:
EQ
DISC-IN
FM I, II, T - FM memory level
or
AM,AMT - band or AM memory level T
or
- Track number, clock
- Track number, time played
- CD name, track number
00:20
or
- Time played
12:50
- Clock
9
Quick Reference
The DSC menu settings is switched to
LED ON (factory setting).
Make sure to read the information in
the section on “KeyCard theft protec-
tion system”.
; CDC
Switches to changer operation (only if
a changer is connected).
If there is no changer, the system will
switch to AUX as long as AUX ON is
switched on in the DSC menu.
For more information, refer to “DSC
programming, LED ON/OFF”.
A Eject
Press the CD eject button briefly and
the CD will eject.
@ KeyCard theft protection system
The KeyCard must be inserted before
the unit can be operated.
< CD
Switches to CD operation
= TU (TUNER)
KeyCard
Switches to radio operation. Switches
to the memory levels/bands FM I, FM
II, FMT (Travelstore), AM and AMT
(Travelstore).
Inserting the KeyCard
Press 1 to unlock the operating pan-
el; it will fold down forwards.
Insert the KeyCard with the contact
points facing down (see illustration).
Lock the operating panel.
> CD insert
When the CD is inserted with the label
facing up, it will be automatically trans-
ported into the operating position. The
unit will automatically switch to CD
play.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, un-
lock the panel and remove the
KeyCard to protect the equipment
against theft.
? Visual theft protection
The following conditions must be ful-
filled before the light diode will flash as
a visual indication of theft protection:
The unit is switched off;
1
3
The ignition is switched off;
The operating panel is folded down;
The KeyCard has been removed;
Perform these steps in the reverse or-
der to remove the KeyCard.
10
|