Audiovox Rampage ACC 60 User Manual

OWNER'S MANUAL

SEL

LOUD

PWR

REL

4x40 WATTS

CDC

TUNE

TRK

AS/PS

DISC

SEL

ACC-60

BAND

6^MEM

SCN

RPT

RDM

PGM

CLK

T/F

CLR

AUX

MO/AUX

ACC-60

AM/FM/MPX RADIO

WITH

FOLD-DOWN DETACHABLE FRONT PANEL,

5-DISC COMPACT DISC PLAYER

AND QUARTZ CLOCK

TOLL-FREE INSTALLATION ASSISTANCE

The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you

do, we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days

and hours shown (U.S.A. and Canada only).

TIME ZONE

DAY

PACIFIC

MOUNTAIN

CENTRAL

EASTERN

MON.-FRI.

SATURDAY

8:30AM - 7PM

9AM - 5PM

7:30AM - 6PM

8AM - 4PM

5:30AM - 4PM

6AM - 2PM

6:30AM - 5PM

7AM - 3PM

UNIVERSAL INSTALLATION USING MOUNTING SLEEVE

SLEEVE

ADAPTER

FASTEN THIS END TO SECURE

PART OF DASHBOARD

PERFORATED

SUPPORT STRAP

BOLT

(M4 X 8 MAX)

FASTEN THIS END TO BOLT HOLE

IN REAR CENTER OF CHASSIS

HALF-SLEEVE

BEND BOTTOM

TABS DOWNWARD

BEND TOP

TABS UPWARD

DASHBOARD

SLEEVE

ADAPTER

(REF)

HALF-SLEEVE

(REF)

1. SLIDE RADIO INTO HALF-SLEEVE.

2. SECURE TO STRAP USING BOLT IF POSSIBLE.

3. REINSTALLANY ITEMS YOU REMOVED FROM THE DASHBOARD.

ISO-DIN FINAL INSTALLATION

1. REMOVE TRIM RING FROM FRONT OF RADIO.

2. MOUNT FACTORY BRACKETS ON NEW RADIO

USING EXISTING SCREWS FROM OLD RADIO.

3. SLIDE RADIO AND FRAME INTO DASH OPENING

AND SECURE.

4. INSTALL DASH PANELS PREVIOUSLYREMOVED.

RADIO WIRING

REFER TO PAGE 5 FOR SPEAKER WIRING

SPEAKER WIRING

REFER TO PAGE 4

FOR RADIO WIRING

WARNING!

! NEVERCOMBINE(BRIDGE)OUTPUTSFORUSEWITH1SPEAKER.

! NEVERGROUNDNEGATIVESPEAKERLEADSTOCHASSISGROUND.

! FAILURETOWIREEXACTLYASSHOWNBELOWMAYCAUSEELECTRICALDAMAGETO

THERADIO.

3,4,5,6,7,8

16,32

10,18,19

28,29

13,14,15

SEL

PWR

LOUD

REL

4x40 WATTS

CDC

TUNE

TRK

AS/PS

DISC

SEL

ACC-60

BAND

SCN

RPT

RDM

PGM

T/F

CLK

6^MEM

CLR

MO/AUX

20 21 22 23 25

control. Pressing the Select button once will set

the unit for volume adjustment (VOL will mo-

mentarily appear on the display panel, followed

a few seconds later by V -- and the setting num-

ber). Pressing the button additional times will

select bass adjustment (BAS on display panel),

treble adjustment (TRE), balance (BAL), fader

(FAD), and volume (VOL) again. The display will

return to the normal indication 5 seconds after

the last adjustment or when another function is

POWER (PWR) BUTTON

Press this button to turn the unit on and off.

When the ignition switch is on, the radio will

turn on automatically when the CDC, BAND

or AUX button is pressed.

VOLUME CONTROL

To increase the volume level, rotate the

VOLUME control in the clockwise direction.

The volume will increase and the level will

be shown on the display panel from a

minimum of V -0 to a maximum of V -46

To decrease the volume level, rotate the con-

trol in the counterclockwise direction. The

display will automatically return to the nor-

mal indication 5 seconds after the last vol-

ume adjustment or when another function

is activated. This control is also used in

conjunction with the SEL/LOUD button to

activated. Refer to paragraph

for the LOUD

^f4^{unction of this button.}

BASS CONTROL

To adjust the bass level, first select the Bass

mode by pressing the SEL/LOUD button until the

BAS indication appears on the display panel.

Within 5 seconds of choosing the Bass mode,

rotate the VOLUME Control to adjust the bass

response as desired. The bass level will be

shown on the display panel from a minimum

of B -6 to a maximum of B +6 (B 0 represents flat

response). The display will automatically return

to the normal indication 5 seconds after the last

adjustment or when another function is

activated.

levels as described in

SELECT (SEL)/LOUD BUTTON

^{adjust the bass, treb}4^{le, b}5^alanc6^{e a}7^{nd fader}

This button is used to select the audio

function (volume, bass, treble, balance or

fade) to be adjusted using the VOLUME

compensate for the characteristics of hu-

man hearing. Press and hold the SEL/

LOUD button for at least 2 seconds to acti-

vate this feature as indicated by LOUD on

the display panel. Pressing the button

again for 2 seconds will de-activate the

function and LOUD will disappear from

the display.

TREBLE CONTROL

To adjust the treble level, first select the Treble

mode by pressing the SEL/LOUD button until

the TRE indication appears on the display

panel. Within 5 seconds of choosing the

Treble mode, rotate the VOLUME control to

adjust the treble response as desired. The treble

level will be shown on the display panel from a

minimum of T -6 to a maximum of T +6 (T 0

represents flat response). The display will auto-

matically return to the normal indication 5

seconds after the last adjustment or when

another function is activated.

AM/FM BAND SELECTOR

During radio play, each time the button is

pressed, the radio band changes. The

indications AM^I, AM^II, FM^I, FM^II, or FM^III

will appear on the display panel accord-

ing to your selection.

LEFT/RIGHTBALANCECONTROL

To adjust the left-right speaker balance, first select

the Balance mode by pressing the SEL/LOUD but-

ton until the BAL indication appears on the display

panel. Within 5 seconds of choosing the Balance

mode, rotate the VOLUME control clockwise to ad-

just it to the right channel speakers, or counterclock-

wise to adjust it to the left channel speakers. The

balance position will be shown on the display panel

from L 12 (full left) to R 12 (full right). When the

volume level between the left and right speak-

ers is equal, C 00 will be shown on the display

panel. The display will automatically return to

the normal indication 5 seconds after the last ad-

justment or when another function is activated.

During CD play, pressing this button will

change to radio operation without ejecting the

disc.

UP/DOWN TUNING (

(TRK)SELECTION

)/CD TRACK

During radio operation, each time the Up

TUNE button ( )is pressed, the radio will

tune two frequency steps higher. Similarly,

each press of the Down TUNE button (

)

will tune two frequency steps lower. Press-

ing either button for longer than 1 second

and then releasing will activate the auto-

matic seek tuning function, whereby the ra-

dio will seek the next station in the selected

direction and stop and remain at that fre-

quency.

FRONT/REARFADERCONTROL

To adjust the front-rear speaker balance, first

select the Fader mode by pressing the SEL/

LOUD button until the FAD indication appears on Pressing and holding either button for longer

the display panel. Within 5 seconds of choosing

the Fader mode, rotate the VOLUME control clock-

wise or counterclockwise to adjust the front-rear

speaker levels as desired. The fader position will

be shown on the display panel from F 12 (full front)

to R 12 (full rear). When the volume level between

the front and rear speakers is equal, C 00 will

appear on the display panel. The display will auto-

matically return to the normal indication 5 sec-

onds after the last adjustment or when an-

other function is activated.

than 1 second will cause the radio to con-

tinue tuning rapidly in the selected di-

rection until the next available station and

momentarily stop there. Tuning will continue

unless the button is released at the desired

station.

During CD player operation, these buttons

are used to select a desired track on the

disc. (Refer to Track Select.)

AUTO-STORE TUNING (AS)

PRE-SET SCAN TUNING (PS)

LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this

feature will boost the bass and treble ranges to

Press this button momentarily to scan

the 6 stations in the pre-set memories of

the band in use. The unit will stop at each

pre-set station for 10 seconds before continu-

ing to the next pre-set station (the frequency

on the display panel will flash during Pre-Set

Scan operation). Press the button again

momentarily to stop Pre-Set Scan operation

and remain on the selected frequency.

fortable listening, the stereo indication will ap-

pear intermittently or not at all; if an AM or monau-

ral signal is received, the

icon will disappear

from the display panel.

LIQUID CRYSTAL DISPLAYPANEL

The Liquid Crystal Display (LCD) panel displays

the frequency, time, and activated functions.

Pressing the button for longer than 2 sec-

onds will activate the Auto-Store Tuning fea-

ture. The radio will automatically scan the band

in use and enter strong local stations into

the pre-set memory positions for that

band. LOC will appear on the display as

tuning occurs. If you have already set the

pre-set memories of that band to your favor-

ite stations, activating the Auto-Store Tun-

ing feature will erase those stations and

enter the new stronger stations. This fea-

ture is most useful when traveling in a new

area where you are not familiar with the lo-

cal stations.

NOTE: It is a characteristic of LCD panels that, if

subjected to cold temperatures for an

extended period of time, they may take

longer to illuminate than under normal

conditions. In addition, the visibility of

the numbers on the LCD may slightly

decrease. The LCD readout will return

to normal when the temperature increases

to a normal range.

FUNCTION DISPLAY

The Function Display consists of a single bar

graph which displays a bar graph which provides

a visual representation of the audio signal power

level. As the volume is increased, the number of

illuminated segments will increase.

STATION PRE-SET MEMORIES

To manually set any of the 6 pre-set memory

buttons, use the following procedure:

DISC SLOT

1. Turn the unit on and select the desired band.

2. Select the first station to be pre-set

using the TUNE/TRK buttons.

3. Press and hold the pre-set button to

be set for approximately 2 seconds.

The pre-set number CH 1-6 will appear

on the display, indicating the station is

now set into the memory position of that

pre-set button and can be recalled at any

time by momentarily pressing that button.

With the label surface facing up, gently insert each

disc into the slot until the soft-loading mecha-

nism engages and draws the disc into the player.

The number of discs loaded will appear both on the

front panel display disc icon (flashing white segment)

and on the DISC INF display on the rear of the front

panel. The discs will be loaded in order beginning

with the number (1-5) currently displayed. Disc play

will begin when the CDC button is pressed; and play

will start with track 1 on the last disc loaded, unless

another disc is selected using the DISC SEL

button on the front side of the panel.

4. Repeat the above procedure for the

remaining 5 pre-sets on the band in use

NOTE: This unit is designed for play of standard

5" (12cm) Compact Discs ONLY. Do not

attempt to use 3" (8cm) CD-Singles in

this unit, either with or without an adap-

ter, as damage to the player and/or disc

can occur. Such damage will not be cov-

) on the dis-

ered by the Warranty on this product.

bo^{and for the other 4 bands of the unit.}

FMSTEREO/LOCAL(LOC)INDICATIONS

The unit receives both stereo and monaural

signals. During FM radio operation, the unit

is usually receiving a stereo signal as indi-

cated by the stereo icon (

play. If a stereo signal is too weak for com-

CD PLAY/PAUSE SELECTOR (CDC/ II )

the display panel). Play of the track will con-

tinue to repeat until the button is pressed

again and the RPT indication disappears

from the display panel. Repeat Play mode

will also be canceled by activating the Track

Scan or Random Play functions.

When listening to the radio with a disc loaded in

the unit (

icon disc number segment illumi-

nated on the display panel), press this button to

return to disc play mode from the beginning of the

last track in play.

During disc play, press this button to temporarily

stop play of the disc (PAUS will appear on the

display panel). Press the button again to resume

play from the point at which it was stopped. Pause

mode will also be canceled by activating any other

disc function.

REPEATA- B SELECTOR (RPTA-B)

The Repeat A - B function is used to select a

section of the disc other than a complete

track to be repeated. Press and hold the

button at the beginning of the section that

you wish to have repeated (RPT and A will

appear on the display panel). Allow the disc

to play to the end of the section that you

wish to have repeated and then press and

hold the button again (the A on the dis-

play panel will change to a b). The selected

section will be played repeatedly until the

function is canceled by pressing the RPT

A-B button again or activating any other

disc function.

TRACK (TRK) SELECT (

)

The Track Select functions are used to quickly

access the beginning of a particular track. Each

time the Forward Track Select (

pressed, the next higher track number will be

selected as shown on the display panel. Simi-

larly, each time the Backward Track Select (

) button is

)

button is pressed, the next lower track number

will be selected as shown on the display panel.

RANDOM PLAY SELECTOR (RDM)

CUE/REVIEW FUNCTIONS (

High-speed audible search to any section of the

disc can be made by the Cue and Review

)

During disc play, press this button to play the

tracks on the disc in a random shuffled order

(RDM will appear on the display panel). In

Random Play mode, the Forward Track

functions. Press and hold the Cue button (

)

Select (

random order instead of the normal progres-

) to advance rapidly in the

) will also select tracks in the

to advance rapidly in the forward direction or

the Review button (

sion. Backward Track Select (

) will go

backward direction. During either function, the

elapsed time within each track will automatically

be shown on the display panel.

back to the beginning of the track in play if it

has played longer than 5 seconds or to a

random track if it has played less than 5

seconds. The Random Play mode can be

canceled by pressing the button again

( RDM indication will disappear from the

display panel).

TRACK SCAN SELECTOR (SCN)

During disc play, press this button to play the first

10 seconds of each track on the disc in play (SCN

will appear on the display panel and the track num-

ber will flash). When a desired track is reached,

press the Track Scan button again to cancel the

function and play of the selected track will con-

tinue. Track Scan mode will also be canceled by

activating the Repeat Play or Random Play func-

tions.

MEMORY/CLEARSELECTOR(MEM/CLR)

Up to 18 tracks can be programmed for play

in any order you select. The following pro-

cedure is used to program the order of track

play:

TRACKREPEATPLAYSELECTOR(RPT)

1. Select a disc in the unit to begin disc play.

2. Select the first track to be programmed

using the Track Select buttons

During disc play, press this button to repeat the

play of the selected track (RPT will appear on

(TUNE/TRK) and press the MEMory

Selector button. The indication M - 01

will momentarily appear on the display

panel, indicating that the selected

track has been entered as the first one

to be played in Programmed Play

mode.

panel). PGM will disappear from the display panel,

M --- CL will appear momentarily, and the pro-

gram will be erased. The Programmed Play

memory will also be cleared automatically when

the disc(s) is ejected.

NOTE: Program Play memory will be maintained

if the disc is left in the player when the

unit is shut off.

3. Select the second track to be pro-

grammed (this could be on another disc)

using the Track Select button and then

press the Memory Selector button. M -02

will appear on the display, and the

selected track has been entered as

the second one to be played in Programmed

Play mode.

4. In similar manner, continue selecting

other tracks (up to a maximum of 18) to

be played in programmed order. The

indication FULL will appear on the

display panel if attempting to program

more than 18 selections.

crDISC SELECT (DISC SEL) BUTTON

When this button is pressed during disc play, the

next CD in order is selected for play. The selected

DISC segment number (1-5) is highlighted on the

front panel disc icon (

) and flashes while play

is active. The segment number also flashes dur-

ing radio operation if the disc(s) is still installed.

AUXILIARY (AUX) BUTTON

If an portable audio device, is connected to the

Left and Right auxiliary input jacks, this source

can be selected for play through the radio by

pressing the AUX button. When the button is

pressed, A --in appears on the display panel.

When the auxiliary input is being used, no other

audio input sources (radio or CD) are operational.

PROGRAMMEDPLAYSELECTOR(PGM)

To play the tracks in the selected order after

programming is completed, press the Pro-

grammed Play button so that the PGM indi-

cation appears on the display panel. Play

will begin of the first track selected in

the programmed order. During Pro-

grammed Play mode, the Track Select func-

tions will operate in the programmed order

instead of the normal progression. Track

Scan and Track Repeat can be selected

during Programmed Play and will operate

on the programmed tracks.

ct^{PANEL DISC SELECT (DISC SEL) BUTTON}

The back of the front panel contains a DISC SEL

button which is used in conjunction with the disc

number LCD and Disc Eject ( ) button to select

a particular CD you wish to remove and/or replace.

When the DISC SEL button is pressed, the disc

number display to the left sequences through

discs 1-5. Stop at the number disc you wish to

eject and press the eject button. The selected disc

will be ejected.

DISC EJECT (

)

To de-activate Programmed Play and return

to play of all tracks on the disc in normal

order, press the Programmed Play button

again so that the PGM disappears from the

display panel. Activating the Cue/Review

functions or the Random Play mode will

also cancel Programmed Play mode.

Clearing Programmed Play Memory: To clear

the Programmed Play memory, press the

Memory Clear button at any time during Pro-

grammed Play mode (PGM on display

Disc play is stopped; the disc currently selected

for play is ejected and the unit will revert to radio

operation by pressing this button (EJT will briefly

appear on the display panel). When the disc is

ejected, no cd appears on the display; press BAND to

return to radio operation. The disc must be removed

from the unit or be reloaded. Pressing the Disc

Eject button for at least 2 seconds will eject all

discs from the unit in sequence, beginning with

the disc currently in play.

TIME/FREQUENCYDISPLAYSELECTOR(T/F)

FRONT PANELRELEASE (REL) BUTTON

Press this button to call the time display on the

incorporated quartz clock. Press the button again

to return to radio frequency or disc display, or it

will return automatically after 5 seconds.

This button is used to release the mecha-

nism that holds the front panel to the chas-

sis. To detach the front panel, press the but-

ton; the panel will fold down to the horizontal

position. At the center of the panel, press the

release clip to disengage the panel from the

mounting plate, and pull the panel straight

out until it clears the mounting plate guides.

To re-attach the panel, position the panel so

both sides engage the mounting plate guides;

then slide the panel home until the mecha-

nism locks it into place in the mounting plate.

THEFT-DETERRENT LED

A light-emitting diode (LED) with lens is mounted

on the front of the chassis behind the panel mount-

ing plate; the LED will flash at 1-second intervals

when the panel folds down, and will flash at 2-

second intervals when the panel is removed from

the radio. The flashing light serves as both a

visual reminder that the panel has been released,

or as a warning to a would-be thief that the unit

has been disabled by removal of the front panel.

NOTES ON USE OF FRONT PANEL

1. Make sure the front panel is right-side-up

when attaching it to the chassis as it

cannot be attached when up-side down.

2. Do not press very hard on the front panel

when attaching it to the chassis. No

more than light to moderate pressure

should be needed.

RESET BUTTON

A RESET button is accessible on the rear of the front

panel when it is in the fold-down position. The reset

circuitry is provided to protect the microproces-

sor circuitry and should only be activated un-

der the following circumstances.

1. Upon initial installation after all wiring is

completed.

2. If there is a malfunction of any of the

switches on the unit or of the CD player,

pressing the RESET button may clear the

system and return the unit to normal op-

eration.

3. When attaching the front panel, make

sure the right side is correctly engaged

before pressing the left side to lock it into

position.

4. When taking the front panel with you,

please use the supplied carrying case

to protect the panel from dirt and damage.

CAUTION: Pressing the RESET button will cause

all discs to be ejected. When the RESET button

is pressed be certain that the front panel is in the

down position.

PANELMOUNTING

PLATE

DISC SLOT

THEFT DETERRENT

LED

MOUNTING PLATE

GUIDE (2 PLACES)

DISC SELECT

(DISC SEL)

BUTTON

PANELRELEASE

CLIP (PRESS TO

REMOVE PANEL

FROM MOUNTING

PLATE)

CD EJECT

(

) BUTTON

RESET BUTTON

FRONT PANEL

DISC SELECT

DISPLAY

(32)

SETTING THE CLOCK

1. Switch the vehicle ignition “on” and the radio “on” (radio frequency or disc

track number will be shown on the display panel).

2. Press and hold the time button (T/F) approximately 2 seconds

until the time display appears with AM or PM and the colon ( : ) flashing. Release

the T/F button.

3. Press the Down Tuning button ( ) to adjust the hours and the AM/PM indication,

and the Up Tuning button (

) to adjust the minutes to the correct time.

4. When the correct time is shown on the display panel, wait 5 seconds for the

display to return to the normal indication.

ERROR CODES

If a problem should develop while operating the CD player, the following error codes

may be displayed on the display panel:

_{INF-1: Indicates mechanical malfunction. Press the Reset button}dn_.

_{INF-2: Indicates mechanical malfunction. Press the Reset button}dn_.

_{INF-3: Indicates mechanical malfunction. Press the Reset button}dn_.

_{INF-4: Indicates disc focus error. Press the Reset button}dn_.

_{INF-5: Indicates disc focus error. Press the Reset button}dn_.

_{INF-6: Indicates mechanical malfunction. Press the Reset button}dn_.

_{INF-7: Indicates data error. Press the Reset button}dn_.

INF-8: Indicates disc reading error. Eject the disc, make sure

it is clean, undamaged, and loaded correctly (label side up). Re-load the

disc and check for proper operation or try another disc.

INF-9: Indicates disc lever error. Press eject button.

If the suggested measures do not solve the problem, contact an approved warranty

station near you for further assistance.

SPECIFICATIONS

Size:

7" W x 2" H x 6-1/4" D

178 mm x 50 mm x 160 mm

Operating Voltage:

Output Power:

12 volts DC, negative ground

160 watts maximum

(40 watts x 4 channels)

Output Wiring:

Floating-ground type designed for 4 speaker use.

Front and rear channels CANNOT be combined

(bridged) for use with 2 speakers.

RCA low-level outputs (rear channels).

Output Impedance:

Low-Level Output:

Tuning Range:

Compatible with 4-8 ohm speakers.

2.0 Volts (2000 mv)

AM: 530-1,720 kHz. (10 kHz. step)

FM: 87.5-107.9 MHz. (200 kHz. step)

Sensitivity:

AM: 20 uV.

FM: 3.0 uV.

FM Stereo Separation:

CD Frequency Response:

CD Signal/Noise Ratio:

CD Channel Separation:

CD Distortion:

30 dB

20-20,000 Hz. ±1 dB

70 dB

60 dB

0.10%

*Specifications are subject to change without notice.

CARE AND MAINTENANCE

The radio section of your new sound system does not require any maintenance. We

recommend that you keep this manual for reference on the many features found in this unit as

well as how to set the clock.

The compact disc player section also requires no routine maintenance, but proper

understanding of its use and handling will help you obtain maximum enjoyment of its

capabilities. The following points should be observed:

! When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.

! The CD player is a precision instrument and will not operate properly in extreme heat or cold.

In case of such conditions, wait until the interior temperature of the vehicle reaches a normal

temperature before using the player.

! If the temperature inside the player gets too hot, a protective circuit will automatically stop

play of the disc. In this case, allow the unit to cool off before operating the player again.

! Never insert anything other than 5" (12 cm) compact discs into the player as the

mechanism can be damaged by foreign objects.

! Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an adaptor,

as damage to the player and/or disc may occur. Such damage will not be covered by the

Warranty on this product.

! When not using the disc player, always remove the compact disc. Do not leave an ejected

disc sitting in the disc slot as this can expose it to sunlight and other causes of damage.

! Do not attempt to open the unit chassis. There are no user serviceable parts or adjustments inside.

! When the vehicle warms up during cold weather or under damp conditions, moisture may

condense on the lens of the disc player. Should this occur, the player will not operate properly

until the moisture has evaporated.

! The unit is designed with a vibration dampening CD mechanism to minimize interruption of

disc play due to normal vibration in a moving vehicle. When driving on very rough roads,

however, occasional sound skips may occur. This will not scratch or damage the disc and

normal play will resume when the rough conditions cease.

HANDLING COMPACT DISCS

Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound

quality. Please follow these guidelines to take care of your compact discs:

! Use only compact discs with the mark

! Fingerprints, dust, and dirt should be carefully wiped off the disc’s playing surface (shiny side)

with a soft cloth. Wipe in a straight motion from the inside to the outside of the disc.

! Never use chemicals such as record sprays, household cleaners or thinner to clean compact

discs. Such chemicals can irreparably damage the disc’s surface.

! Discs should be kept in their storage cases when not in use.

! Do not expose discs to direct sunlight, high temperatures or high humidity for extended periods.

! Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type of marker.

12 MONTH LIMITED WARRANTY

AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser

of this product that should this product or any part thereof, under normal use and

conditions, be proven defective in material or workmanship within 12 months from the

date of original purchase, such defect(s) will be repaired or replaced with new or

reconditioned product (at the Company's option) without charge for parts and repair

labor.

To obtain repair or replacement within the terms of this Warranty, the product is to be

delivered withproofofwarrantycoverage(e.g.dated billofsale),specificationofdefect(s),

transportation prepaid, to the warranty center at the address shown below.

ThisWarrantydoesnotextendtotheeliminationofcarstaticormotornoise,tocorrection

of antenna problems, to costs incurred for installation, removal, or reinstallation of the

product,ordamagetotapes,compactdiscs,speakers,accessories,orvehicleelectrical

systems.

This Warranty does not apply to any product or part thereof which, in the opinion of the

Company, has suffered or been damaged through alteration, improper installation,

mishandling,misuse,neglect,accident,orbyremovalordefacementofthefactoryserial

number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER

THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED

ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,

SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY

ACTION FOR BREACH OF ANY WARRANTYHEREUNDERINCLUDINGANYIMPLIED

WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30

MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES

FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. NopersonorrepresentativeisauthorizedtoassumefortheCompany

any liability other than expressed herein in connection with the sale of this product.

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above limitations or

exclusions may not apply to you. This Warranty gives you specific legal rights and you

may also have other rights which vary from state to state.

U.S.A.: AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 • 1-800-645-4994

CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA

FormNo.128-4270E

Printed in China

128-6158

16 of 20

Alpine Electronics Car Stereo System CDE 102E User Manual
Black Decker FP1445C User Manual
Black Decker FX350B User Manual
Bose Bluetooth CINEMATE1SR User Manual
Canon EOS 7D HDMI User Manual
Creative Labs Car Stereo System TX FM User Manual
Eclipse Fujitsu Ten CD3404 User Manual
HP (Hewlett Packard) PhotoSmart User Manual
hussman Corp Carrying Case DCSG User Manual
JVC CD RECEIVER KD LHX501 User Manual