AVD400TA
SLOT-IN DVD PLAYER
WITH BUILT-IN TV TUNER
AVD400TA
DVDPLAYER
DOLBY
Owner’s Manual
SAFETY PRECAUTION
For safety reasons do not allow children to unfasten seat-belts to change
video media or make any adjustments to the system. Enjoy your enter-
tainment system but always remember the safety of all passengers is
the number one priority.
IMPORTANT NOTICE
It is unlawful in most states for a person to drive a motor vehicle which is
equipped with a television viewer or screen that is located in the motor
vehicle at any point forward of the back of the driver’s seat, or that is
visible, directly or indirectly, to the driver while operating the vehicle. In
the interest of safety, this system should never be installed where it will
be visible, directly or indirectly, by the operator of the motor vehicle.
1. OBJECTS AND LIQUID
Do not insert objects of any kind into the system through its open-
ings; do not spill or spray liquid on or into the system (this may
result in a fire or electric shock). Do not place heavy objects on the
unit. To ensure proper ventilation and proper operation, never cover
or block the slots and openings.
2. DISASSEMBLY
Do not attempt to disassemble the unit. There is a risk of electric
shock and/or exposure to Laser Radiation. Contact qualified ser-
vice personnel if your system is in need of repair.
3. CLEANING UNIT
When cleaning, make sure the system is unplugged from the power
source. Do not use any solvents or cleaning materials. Clean the
DVD player using a lightly dampened lint free cloth to wipe the unit.
3
4. DISCS or (DISC Media)
Do not use irregularly shaped discs such as heart or star-shaped
discs as they may cause the unit to malfunction. Do not stick pa-
per, tape or glue on the disc. Do not expose the disc to direct sun-
light or heat sources. Do not touch the surface of the disc. Handle
the disc by its edges. Clean the disc by wiping the disc from the
center out with a soft lint free cleaning cloth. Remove the disc from
the unit and store it in its case after playing. Some playback opera-
tions of discs may be intentionally fixed by software producers. Unit
plays discs according to the disc contents the software producers
designed therefore some playback features may not be available.
Refer to the instructions supplied with the discs.
5. Powering the DVD Player
This system MUST be powered from switched (Accessory) power
as indicated on the marking label. Power should be applied to the
unit when the ignition key is in the Run and/or Accessory positions.
Use only the supplied power cable provided with this set to avoid
electric hazards.
6. Operation
When the temperature rises dramatically from a very low tempera-
ture, moisture may condense inside the AVD400TA and cause the
DVD player to malfunction. If theAVD400TAdoes not operate prop-
erly under these conditions leave the AVD400TA turned on for at
least 30 minutes for the moisture to evaporate.
4
C. Contents
1.
2.
3.
4.
5.
6.
7.
1 Main Unit
1 Remote control with one Battery
1 12VDC Power Harness
2 Brackets with 4 Screws
1 Remote IR Receiver
1 AV cable (RCA to RCA)
1 Owner's Manual (not shown)
1.
2.
AVD400TA
DVDPLAYER
DOLBY
AUDIOVOX
3.
4.
X 4
5.
6.
5
D. Controls
Main Unit (Refer to Figure 1)
1. Power Button
2. Play/Stop/Memory Button
3. Mode Button
4. Remote Control Sensor
5. Video Input
1
10
6. LeftAudio Input
7. RightAudio Input
9
8
AVD400TA
DVDPLAYER
2
DOLBY
8. Next Button
9. Previous Button
3
4
5
6
7
10. Eject Button
11. IR Input
11
12. Antenna Input
DOLBY
C
FC
1
13. Audio R Output Jack
14. Audio L Output Jack
15. Video Output Jack
16. S-Video Output Jack
17. External Remote Eye Input
18. DigitalAudio Output
19
18 17
16 15 14 13
12
Figure 1
19. DC In 12V Power Supply Connector
6
E. Remote Control View (Refer to Figure 2)
2
1
1)
2)
3)
4)
MODE Button
POWER Button
MENU Button
14
13
3
15
16
17
UP/DOWN/
LEFT/RIGHT Button
ENTER/PLAY/ADD Button
VOLUME +/- Buttons
NUMERIC KEYPAD
10+ Button
TITLE Button
AUDIO Button
REPEAT Button
SUBTITLE Button
DISPLAY Button
EJECT Button
SETUP Button
PAUSE Button
STOP MEMORY Button
NEXT CH+ Button
PREVIOUS CH- Button
SCAN FORWARD Button
SCAN REVERSE Button
MUTE Button
GOTO Button
ZOOM Button
5)
6)
7)
8)
9)
4
4
(Ref)
5
6
18
19
20
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
7
21
22
23
8
9
24
25
AUDIOVOX
10
26
11
12 27
Figure 2
A-B REPEAT Button
ANGLE Button
SLOW Button
7
F. Connections
AVD400TA
DVDPLAYER
DOLBY
Front
Yellow Video Input (to DVD Player)
Red Audio In
White Audio In
DOLBY
C
FC
1
TV Antenna
Rear
Yellow Video Out
Red Audio Out
(GND) Black
(ACC) Red
White Audio Out
Figure 3
1. Powering your DVD Player ( Refer to Figure 3)
Connect the black wire (-) to the vehicle ground. Connect the red
wire (+) to a switched (Accessory) 12VDC source. Plug the other
end into the 12VDC input jack on the back of the unit.
2. Remote IR Receiver ( Refer to Figure 3)
Plug the 1/8” plug on the remote IR cable into the IR IN jack on the
back of the DVD player. Place the IR receiver anywhere in the
vehicle to allow remote control from any location.
3. Connecting to a Monitor ( Refer to Figure 3)
a. Match the color-coded plugs to the appropriate jacks on the
back of the DVD Player A/V OUTPUT jacks: Yellow (video) to
Yellow, White (left audio) to White, and Red (right audio) to Red.
8
4. Connecting an External Video Source ( Refer to Figure 3)
To connect a video game or another audio/video source, plug the
A/V cable into the A/V input jacks on the front of the DVD player.
5. Connecting a TV Antenna (Refer to Figure 3)
Connect an optional TV antenna to the “TVANTENNA” jack on the
back of the DVD player.
G. Playing
After connecting power to the unit, press the power button on the
main unit momentarily. Insert the disc into the slot on the front of the
unit, the unit will load the disc and start playing automatically: If there’s
a disc inside the unit, press the POWER button, the unit will start
playing automatically.
1. BASIC OPERATION
POWER
EJECT
PLAY
Turn the unit on/off
Eject/load the disc
Start Play/Execute item or setting
Play at 1/2, 1/4, 1/6 or 1/7 times speed
Still Picture
SLOW
PAUSE
STOP
(1 time) Stop at the present playing point /
(2 times) Stop playing
NEXT
Go to the next chapter, track or scene during play
back
PREVIOUS
Go back to the preceding chapter, track or scene
during play back
FAST FORWARD
FAST REVERSE
Scan forward at 2, 4, 8 or 20 times normal speed
Scan backward at 2, 4, 8 or 20 times normal
speed
UP/DOWN/LEFT/RIGHT
ENTER
Used for Menu Navigation
Execute item or setting
9
1. BASIC OPERATION (CONTINUED)
Select item or setting
NUMBERS
Return
RETURN
Display the root menu of the disc
MENU
Repeat playing title, chapter, or track
Display information (title, chapter, track, time, etc.).
Change the angles of a scene
REPEAT
DISPLAY
ANGLE
SUBTITLE
AUDIO
Select the subtitle language
Select the audio language
Enlarge an image to 2, 3, or 4 times the
original
ZOOM
When the unit is in play mode this button will bring
up a display for Brightness + Sharpness adjustment.
For DVD playback Setup press stop and then press
Setup to select and set items, and exit the setup
menu.
SETUP
2. MENU
A DVD is divided into sections called titles and chapters. When
you play a DVD, a root menu of the disc will appear on the screen of
your TV or Monitor. Contents of the menu will vary depending on the
disc content. Press MENU during playback to display the main
menu. Some DVDs only allow you to select disc playback options
using the DVD root menu.
10
3. DISPLAY
1) Display mode
During playback press DISPLAY once to display items 5, and 7. Press
DISPLAY twice to display the current disc playback information. Press
display again to remove the display.
Display Mode
1. The type of disc.
9. The number of total angles.
2. The number of current title.
3. The number of total titles.
4. The number of current chapter.
5. The elapsed time of title.
6. The number of total chapters.
7. The remaining time of title.
8. The number of the current
angle.
10. The number of the current audio language.
11. The number of total audio languages.
12. The number of current subtitle language.
13. The number of total subtitle languages.
14. Current subtitle language.
15. Dolby audio mode.
16. Current audio language selected.
11
4. ANGLE
During playback pressANGLE to change the current angle of discs contain-
ing multi-angles. (You can see item 8 in the display change) If the disc has
only one angle, you will see on the screen when pressingANGLE indicat-
ing that no other angles are available.
5. SUBTITLE
During disc playback press SUBTITLE* to select the desired subtitle lan-
guage. (You can see item 14 change)
6. AUDIO
During disc playback press AUDIO* to select the desired audio language.
(You can see item 10 in Picture 1 change) *NOTE: Some DVD’s only allow
access to these functions through the DVD menu.
7. ZOOM
2
‘Zoom’ in Display Mode
2
‘Zoom’ Display
During playback press ‘ZOOM’ to enlarge the picture by 2x or 3x with
the current zoom multiple displayed.
8. REPEAT
12
Repeat Chapter
‘Repeat’ Display
During playback press ‘REPEAT’ once to repeatedly play the current
chapter, press a 2nd time to repeat the current title, press a 3rd time
and the repeat function is cancelled and normal playback resumes.
Repeat mode sequence:Repeat Chapter/Repeat Title/Off.
9. PLAYING AUDIO CDS
When playing an audio CD the AVD400TA will automatically display
the disc playback information. The options below show you what
information is displayed. Press the ‘DISPLAY’ button to remove the
display.
1. The current track.
2. The number of total tracks.
3. Playing time of the disc.
4. Remaining time of the disc.
1
2
4
3
Display in Playing CD
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Repeat Single- repeats the track that is playing.
• Repeat All- repeats the disc that is playing.
• Off
13
As you toggle through the options, the repeat option changes. The selected
repeat option loops repeatedly until its turned off.
10. PLAYING MP3 DISCS
MP3 is a digital audio format. An audio CD-quality song is compressed
into the MP3 format with no significant loss of audio quality. CD-R /
RW discs that have been encoded in MP3 format are compatible
with this device.
Insert an MP3 Disc, the DVD player will initialize the disc and the directory
(folder) will be shown on the monitor.
00:00:33
CD-R MENU
0
1
2
3
4
5
6
ROOT
--------28
-----------
------
Name1
Name2
Name3
Name4
Name5
Name6
Mode
Folder Normal
‘MENU Screen’ Display
When an MP3 disc is inserted into the unit, the menu screen appears
automatically. You can use the menu screen to change folders and
songs. The system plays the songs in the order they were recorded
onto the disc.
1. Press the or button to choose a folder from the folder list
on the left side of the screen.
2. Press ENTER to select the highlighted folder. All songs avail-
able under the selected folder will be listed.
3. Use or button to choose a song from the list then press
ENTER to play the selected song.
Use the
( NEXT ) button to move to the next song. Press the
(PREVIOUS) button to move to the beginning of the song.
14
USING THE REPEAT FEATURE
The default mode for the Repeat feature is OFF. Pressing REPEAT
consecutively changes the repeat options:
• Repeat Single(repeat playback of a song)
• Repeat All (repeat playback of all folder)
• Off (normal playback)
Pressing REPEAT a 3rd time will resume normal playback. As you
toggle through the options, the repeat option changes. Selected repeat
option loops repeatedly until you turn it off.
NOTICE
• “ ” sign in front of a file name indicates that this is a folder, not a MP3
file.
• “ ” sign in front of a file name indicates that this is a MP3 file. During
MP3 playback, you cannot access “PLAYMODE”, folders or songs.
11. Playing a JPEG file
1) Insert the JPEG Disc into tray.
2) You can preview the JPEG file by pressing the MENU Button.
3) Press PLAY to playback the JPEGS in order.
4) Press PAUSE to STOP on a picture.
WATCHING TV
1. Select the TV mode by pressing the mode button on the remote or
the front panel. The current channel number will be displayed on the
monitor and tv ch17 will be displayed on the front panel display.
2. Press the STOP/MEMORY button on the remote control to auto-
matically search and store all active channels into memory
3. Use the CH- and CH+ buttons to search through the channels
stored in memory.
15
4. Direct access any channel by using the numeric keypad on the
remote control.
5. Pressing the PLAY/ENTER/ADD button on the remote control
will alternately ADD or DELETE channels from memory.
12. SETUP
Press STOP and then Press ‘SETUP’ to display the Main screen of
the SETUP Menu on the screen. Press ‘SETUP’ again to exit the
SETUP Menu and the unit will resume it’s last playback mode.
Main ‘SETUP’ Menu Screen
1) Select language using the LEFT/RIGHT buttons.
‘Language’ Display Menu
a. Select ‘OSD Menu’ using the UP/DOWN buttons, then press
ENTER to enter the submenu. Select the OSD language you desire
using the UP/DOWN buttons, then press ENTER to confirm the
setting.
‘OSD’ Display Menu
16
b. Select ‘Subtitle’ using the UP/DOWN buttons, then press ENTER
to enter the submenu. Select the ‘Subtitle’ language you desire
using the UP/DOWN buttons, then press ENTER to confirm the
setting.
‘Subtitle’ Display
c. Select “Audio” using the UP/DOWN buttons, then press ENTER
to enter the submenu. Select the audio language you desire using
the UP/DOWN buttons, then press ENTER to confirm the setting.
‘Audio’ Display
d. Select ‘DVD Menu’ using the UP/DOWN buttons, then press ENTER
to enter the submenu. Select the ‘DISC Menu’ language you desire
using the UP/DOWN buttons, then press ENTER to confirm the
setting.
‘DVD Menu’ Display
17
2) Select ‘Video’ by using the LEFT/RIGHT buttons, press ENTER to
enter the Video set up page.
‘Video’ Display
a. Select ‘TV Shape’ using the UP/DOWN buttons, then press ENTER
to enter the submenu. Select the aspect ratio you desire using the
UP/DOWN buttons, then press ENTER to confirm the setting.
‘TV Shape’ Display
* 4:3/PS: When the player is connected to a normal TV, and a wide
picture is shown on the full screen.
* 4:3/LB: When the player is connected to a normal TV, and a wide
picture is shown on the screen with a black strip at both the top and
bottom of the screen.
* 16:9: When the player is connected to a wide screen TV, a wide
picture is shown on the full screen.
18
b. Select ‘TV System’ using the UP/DOWN buttons, then press ENTER
to enter the submenu. Select the TV System you desire using the UP/
DOWN buttons, then press ENTER to confirm the setting.
‘TV System’ Display
3) Select ‘AUDIO’ using the LEFT/RIGHT buttons.
‘AUDIO’ Display Menu
a. Select ‘DIGITALOUT’using the UP/DOWN buttons, then press EN-
TER to enter the submenu. Select the digital output you desire using
the UP/DOWN buttons, then press ENTER to confirm the setting.
‘DIGITAL OUT’ Display Menu
19
b. Select ‘LPCM 48k DS’ using the UP/DOWN buttons, then press
ENTER to enter the submenu. Select the LPCM output you desire
using the UP/DOWN buttons, then press ENTER to confirm the
setting.
‘DTS’ Display
4) Select ‘Rating’ by using the LEFT/RIGHT buttons, press ENTER to
enter the Rating set up page.
‘Rating’ Display
Select ‘Password’ using the UP/DOWN buttons. For first time use the
default password 3308 to unlock the unit. Select ‘Rating’ using the
UP/DOWN buttons. Select the rating level you desire by repeatedly
pressing the ENTER button . Use the UP button to return to ‘Pass-
word‘ and input either the default password or any new 4 digit pass-
word and press ENTER.
Rating:1.Kid Safe 2.G 3.PG 4.PG-13
5.PG-R 6.R 7.NC-17 8.Adult
20
NOTE: For 1st time use the default password is 3308.
NOTE: The Default Password is 3308. This password is always
effective even after you have selected your own password and
changed it. To avoid the possibility of others using the default
password to set the parental level and change the password, you
can record this default password in another area and delete it
from this manual. Some discs can be limited depending on the
age of users while some discs can not.
Restore Default: To restore all of the options to the default settings select
‘RESTORE DEFAULT’ using the UP/DOWN buttons and press ENTER.
This will return all of the settings except parental to the default settings.
21
H. Specification
Supported media
Signal format system
TV System
DVD/CD/MP3/JPEG/CD-R
NTSC/PAL
NTSC VHF UHF
DVD Video format
Horizontal 720 pixel,
vertical 480 pixel
Video output
1.0 Vp-p/75 Ohm
Audio output
1.2 V to 1.8 V
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Wow and flutter
Power source
More than 60 dB
Less than 60 dB
More than 70 dB
Beyond measurable Limits
DC 12 V
Power consumption
Less than 1W in stand-by mode;
and less than 12W in use
0°C (32°F) to +40°C (104°F)
-20°C (-4°F) to +60°C (140°F)
5% to 95%
Operating temperature
Storage temperature
Operating humidity
Dimensions (W x H x D)
7 x 2 x 7.3 inches
(178 x 50 x 186 mm)
3 lbs (1.6 kg)
Weight
22
36 MONTH LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOXELECTRONICSCORP. (theCompany)warrantstotheoriginalretail
purchaser of this product that should this product or any part thereof, under
normal use and conditions, be proven defective in material or workmanship
within 36 months from the date of original purchase, such defect(s) will be
repaired or replaced with reconditioned product (at the Company's option)
without charge for parts and repair labor. A game controller, if supplied, is
similarly waranteed for ninety days.
To obtain repair or replacement within the terms of this Warranty, the product is
to be delivered with proof of warranty coverage (e.g. dated bill of sale),
specification of defect(s), transportation prepaid, to the Company at the address
shown below.
This Warranty does not extend to the elimination of externally generated static
or noise, to correction of antenna problems, to costs incurred for installation,
removal or reinstallation of the product, or to damage to digital memory cards,
discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion
of the Company, has suffered or been damaged through alteration, improper
installation, mishandling, misuse, neglect, accident, or by removal or deface-
ment of the factory serial number/bar code label(s). THE EXTENT OF THE
COMPANY'SLIABILITYUNDERTHISWARRANTYISLIMITEDTOTHEREPAIR
OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABIL-
ITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING
ANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHIN
APERIODOF48MONTHSFROMDATEOFORIGINALPURCHASE. INNOCASE
SHALLTHECOMPANYBELIABLEFORANYCONSEQUENTIALORINCIDEN-
TALDAMAGESFORBREACHOFTHISORANYOTHERWARRANTY,EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.,
HAUPPAUGE, NEW YORK 11788 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION
SERVING YOURAREA
© 2005 Audiovox Electronics Corporation
1285148E
23
© 2005 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788
128-7394
|