EN
FR
ES
R
CD Receiver
CDE-124SXM/CDE-123/CDE-122
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
Phone 03-8787-1200
Phone 02-484781
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
68-16909Z42-B
ENGLISH
Contents
Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left and
Loudness/Defeat.......................................................14
Adjusting the Parametric Equalizer Curve
Set your favorite source to the FAV button
Set your favorite source to the FAV button
Setting the AUX REAR Setup Mode
Setting the AUX REAR Level (AUX-R GAIN)
Folder/File Name Search
Connecting to an External Amplifier
3-EN
ENGLISH
Contents
SiriusXM (SXM) Satellite Radio Setting
(CDE-124SXM/CDE-123 only) (Only when
current source is Satellite Radio
(SIRIUSXM))............................................................. 21
Confirming the strength of the SiriusXM
Select Playlist/Artist/Album/Genre/
Flash Memory/Portable audio player
When connect Flash Memory to Front USB
Remove Flash Memory from Front USB
Using the Flash Memory/Portable audio
Searching by Explorer (FILE NAME) mode
Select Playlist/Artist/Album/Genre/
Alphabet Skip Function
SiriusXM Satellite Radio Operation
optional)
Receiving Channels with the SiriusXM Tuner
optional).......................................................................31
Using Jump Memory and Jump Recall
4-EN
ENGLISH
Contents
Indication for Flash Memory/Portable audio
SiriusXM Advisory Messages
iPod/iPhone Connection
Rear Flash Memory Connection
5-EN
Operating Instructions
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
WARNING
WARNING
This symbol means important instructions. Failure
to heed them can result in serious injury or death.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and −10°C (+14°F) before turning your unit on.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
for servicing.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Never Attempt the Following
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
Inserting Discs
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
CAUTION
This symbol means important instructions. Failure
to heed them can result in injury or material
property damage.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
6-EN
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
New Discs
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then
insert the disc again.
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Center Hole
Center Hole
New Disc
Outside
(Bumps)
Bumps
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use any
special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Installation Location
Make sure this unit will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
Excessive vibrations
To customers using CD-R/CD-RW
•
If a CD-R/CD-RW cannot be played back, make sure the last
Correct Handling
recording session was closed (finalized).
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
•
Finalize the CD-R/CD-RW if necessary, and attempt playback again.
About media that can be played
The following table shows which discs can be played on which
models.
CORRECT
CD
CD-TEXT
MP3
WMA
AAC
CDE-124SXM
/CDE-122
CDE-123
INCORRECT
CORRECT
Use only compact discs with the label side showing the CD logo
marks below.
Disc Cleaning
If you use non-standard compact discs, correct performance cannot
be guaranteed.
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
You can play CD-Rs (CD-Recordables)/CD-RWs
(CD-ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3 formatted
audio files.
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording failed
7-EN
or a re-recording was attempted, copy-protected CDs which do not
conform to the audio CD industry standard.
Use discs with compressed audio files written in a format compatible
Data files, other than audio, on the disc are ignored and are not
played back.
•
•
•
Fix the Portable audio player in a location where driver operation will
not be hindered.
Portable audio player may not function correctly at high or low
temperature.
Depending on the settings of the Portable audio player type, memory
state or encoding software, the unit may not play back or display
properly.
•
•
•
•
If the Portable audio player has an MSC/MTP setting, set to MTP.
A Portable audio player in which data is stored by USB Mass Storage
may not be playable on the unit.
Depending on the Portable audio player settings, USB Mass Storage
may be supported. For setting, refer to the Owner’s Manual of the
player.
The unit can play back MP3/WMA files synchronized by Windows
Media Player (Ver. 7, 8, 9), and are then forwarded to the player. The
“mp3” or “wma” extensions are playable.
If data is not synchronized by Windows Media Player and is
forwarded in another way, the unit may not be able to correctly play
back the files.
A file that is copy-protected (copyright protection) cannot be played
back.
It is recommended to back up important data on a personal
computer.
Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, then remove the USB device
to prevent possible damage to its memory.
When Nokia is used as a Portable audio player:
Not all the Nokia mobile phones can be used as Portable audio
players.
Protecting the USB Connection Terminal
•
•
•
Only USB Flash Memory devices, Portable audio player or iPod/
iPhone can be connected to the USB connection terminal on this
unit. Correct performance using other USB products cannot be
guaranteed. A USB hub is not supported.
Do not connect Flash Memory over 20 mm wide to front USB
terminal.
Also, avoid connecting Flash Memory to the front USB terminal and
connecting Front Aux at the same time.
If a USB device is inserted in the unit, it projects out and may be a
danger while driving.
•
•
•
•
•
•
Use a commercially available USB extension cable, and connect it in a
safe way.
Depending on the connected Flash Memory device, the unit may not
function or some functions may not be performed.
The audio file format that can be played back on the unit is MP3/
WMA/AAC.
•
•
•
Artist/song name, etc., can be displayed, however characters may not
be correctly displayed.
•
On Handling USB Flash Memory
If the Nokia mobile phone fails to work as a Portable audio player
while connected, set it to Mass Storage mode and reconnect to this
unit. For details, refer to Owner’s Manual of the Nokia mobile phone.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
•
Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
•
•
To prevent malfunction or damage, note the following points.
Read the Flash Memory Owner’s Manual thoroughly.
Fix the Flash Memory in a location where driver operation will not be
hindered.
•
•
iPhone, iPod, iPod classic, iPod nano, iPod touch, and iTunes are
trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod,” and “Made for iPhone,” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards.
Pandora and the Pandora logo are registered trademarks of Pandora
Media, Inc. All rights reserved.
Due to music licensing restrictions, the Pandora radio service is only
available in the United States.
•
•
Flash Memory may not function correctly at high or low temperature.
Use only certified USB Flash Memory Devices. Please pay attention
that even certified Flash Memory, may not function correctly
depending on its type or state.
•
•
•
•
Flash Memory function is not guaranteed. Use Flash Memory
according to the terms of agreement.
Depending on the settings of the Flash Memory type, memory state
or encoding software, the unit may not play back or display properly.
A file that is copy-protected (copyright protection) cannot be played
back.
Flash Memory may take time to start playback. If there is a particular
file other than audio in the Flash Memory, it may take considerable
time before the file is played back or searched.
•
This device will control Pandora when connected to a compatible
iPhone.
•
•
SiriusXM and all related marks and logos are trademarks of
SiriusXM Radio Inc. and its subsidiaries. All rights reserved.
•
•
The unit can play back “mp3”, “wma” or “m4a” file extensions.
Do not add the above extensions to a file other than audio data. This
non-audio data will not be recognized. The resulting playback may
contain noise that can damage speakers and/or amplifiers.
It is recommended to back up important data on a personal
computer.
Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, then remove the USB device
to prevent possible damage to its memory.
®
The BLUETOOTH word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Alpine Electronics, Inc. is under license.
•
•
•
•
“MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.”
“Supply of this product only conveys a licence for private,
non-commercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenue-generation)
real time broadcasting (terrestrial, satellite, cable and/or any other
media), broadcasting/streaming via internet, intranets and/or other
networks or in other electronic content distribution systems, such as
pay-audio or audio-on-demand applications. An independent
license for such use is required. For details, please visit http://
www.mp3licensing.com”
On Handling Portable audio player
•
The unit can control a Portable audio player with the USB interface.
Playable audio file formats are MP3 and WMA.
•
Portable audio player function is not guaranteed. Use Portable audio
player according to the terms of agreement. Read the Portable audio
player Owner’s Manual thoroughly.
8-EN
*4 The Pandora source can be displayed only when PANDORA is
set to ON. For details, refer to “Setting the Pandora Source” on
page 22. For CDE-123, during PANDORA F source, you can
switch to PANDORA R source by pressing BAND/F/R; for
CDE-124SXM/CDE-122, the source name is PANDORA.
only)
For CDE-123, during AUX source, you can switch to AUX
REAR source by pressing BAND/F/R when ON is set in “Setting
the AUX REAR Setup Mode (AUX-R SET)” (refer to “Setting the
page 19).
Getting Started
Rotary encoder/ /ENTER
AUDIO/SETUP
FAV
SOURCE/
Note
•
You can recall your favorite source by pressing FAV directly. For details,
FUNC./VIEW
BAND/ F/R
*
The illustration is for CDE-123.
Detaching and Attaching the Front Panel
Accessory List
Detaching
•
•
•
•
•
•
•
•
•
•
Head Unit ..................................................................................1
Power Cable ..............................................................................1
USB Cable (CDE-123 only)........................................................1
Interface cable for iPod (CDE-123 only) .................................1
SiriusXM Tuner (CDE-124SXM only)........................................1
Mounting Sleeve ......................................................................1
Carrying Case............................................................................1
Bracket key ...............................................................................2
Screw (M5 × 8) ..........................................................................4
Owner’s Manual..................................................................1 set
1
2
Turn off the unit power.
Press e (Release) at the lower left side until the front
panel pops out.
3
Grasp the left side of the front panel and pull it out.
Turning Power On and Off
Notes
Press SOURCE to turn on the unit.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
Note
•
The unit can be turned on by pressing any other button except and
e (Release).
•
•
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it may
result in malfunction.
Press and hold SOURCE for at least 2 seconds to turn
off the unit.
Attaching
Note
•
The first time power is turned on, the volume will start from level 12.
1
2
Insert the right side of the front panel into the main unit.
Align the groove on the front panel with the projections
on the main unit.
Source Selection
Push the left side of the front panel until it locks firmly into
the main unit.
Press SOURCE to change the source.
TUNER SIRIUSXM*1 DISC USB FRONT*2/iPod FRONT*3
PANDORA F*4 BT AUDIO*5 AUXILIARY*6 TUNER
*1 Displayed only when a SiriusXM Tuner is connected.
(CDE-124SXM/CDE-123 only)
*2 Displayed only when no iPod/iPhone is connected. For
CDE-123, during USB FRONT source, you can switch to USB
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is USB AUDIO.
*3 Displayed only when the iPod/iPhone is connected. For
CDE-123, during iPod FRONT source, you can switch to iPod
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is iPod.
9-EN
Notes
Notes
•
Before attaching the front panel, make sure that there is no dirt or dust
on the connector terminals and no foreign object between the front
panel and the main unit.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold ENTER for at least 2 seconds after
setting the “hour”. Minutes will reset to “00”. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Press to return to the previous mode.
•
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
•
•
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Initial System Start-Up
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer.
Point the optional remote control transmitter at the remote control
sensor.
Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
2
3
Turn off the unit power.
Remote control sensor
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar pointed object.
RESET switch
Connectable to Steering Remote Control Interface Box (CDE-123
only)
You can operate this unit from the vehicle’s control unit when an
Alpine Steering Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
Setting the Time
1
2
Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.
Turn the Rotary encoder to select the GENERAL mode,
and then press ENTER.
BLUETOOTH*1 GENERAL AUDIO DISPLAY SXM SETUP*2
iPod & USB
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO. (CDE-123 only)
*2 Displayed only when a SiriusXM Tuner is connected and the
current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/
CDE-123 only)
3
Turn the Rotary encoder to select CLOCK ADJ, and then
press ENTER.
The time indication will blink.
4
5
6
Turn the Rotary encoder to adjust the hours while the
time indication is blinking, and then press ENTER.
Turn the Rotary encoder to adjust the minutes while the
time indication is blinking.
Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
10-EN
Presetting Stations Automatically
Radio
1
2
Press BAND repeatedly until the desired radio band is
displayed.
Rotary encoder//ENTER
SOURCE/
Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.
TUNE/A.ME
BAND
•
Preset buttons
(1 through 6)
*
The illustration is for CDE-123.
Tuning to Preset Stations
Listening to Radio
Select the band, and then press any one of the station
preset buttons (1 through 6) that has your desired radio
station in memory.
1
2
Press SOURCE to select TUNER mode.
The display shows the band, preset number and frequency of
the station selected.
Press BAND repeatedly until the desired radio band is
displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
Frequency Search Function
3
Press TUNEA.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual
mode) DX SEEK
You can search for a radio station by its frequency.
Note
1
Press and hold ENTER for at least 2 seconds in Radio
mode to activate Frequency search mode.
•
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
2
3
Turn the Rotary encoder to select the desired frequency.
Local mode:
Press ENTER to receive the selected frequency.
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Note
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
•
Press in the search mode to cancel. Or, the search mode will be
canceled if no operation is performed for 10 seconds.
4
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Presetting Stations Manually
While receiving the station that you want to store, press
and hold, for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The display shows the band, preset number and station
frequency memorized.
Notes
•
A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
•
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
11-EN
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
CD/MP3/WMA/AAC
Repeat Play
Rotary encoder/ /ENTER
SOURCE/
1
Press a 4.
The song is played back repeatedly.
*1
*2
a
a (off) a
*1 Only a track is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3/WMA/
AAC mode only)
2
To cancel repeat play, select (off) with the above
procedure.
*
The illustration is for CDE-123.
M.I.X. (Random Play)
Playback
1
Press 5s.
The songs are played back in random sequence.
The following table shows which discs can be played on which models.
*1
*2
s s ALL (off) s
CD
CD-TEXT
MP3
WMA
AAC
*1 Only files in a folder are played back in random sequence.
(MP3/WMA/AAC mode only)
CDE-124SXM
/CDE-122
*2 The tracks/files are played back in random sequence.
CDE-123
2
To cancel M.I.X. play, select (off) with the above procedure.
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
2
Press ENTER during play.
This will set the search mode, and the “” indicator lights up.
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Note
•
When a disc is already inserted, press SOURCE to switch to the
DISC mode.
Notes
2
3
While playing back MP3/WMA/AAC, press or to select
the desired folder.
•
Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
•
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
Folder/File Name Search (concerning MP3/
WMA/AAC)
4
5
To pause playback, press .
Pressing again will resume playback.
To eject the disc, press .
Folder and file names may be searched and displayed during playback.
Notes
Folder Name Search mode
•
Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
The “” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs can not be used.
•
•
•
1
2
During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The “” indicator lights up.
Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
•
12-EN
What is MP3?
3
4
Turn the Rotary encoder to select the desired folder.
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression
standard prescribed by the ISO, the International Standardization
Organization and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable of
compressing audio data at extremely high ratios, reducing the size of
music files to as much as one-tenth their original size. This is achieved
while still maintaining near CD quality. The MP3 format realizes such
high compression ratios by eliminating the sounds that are either
inaudible to the human ear or masked by other sounds.
Press and hold ENTER for at least 2 seconds to play
back the first file in the selected folder.
Notes
•
Press and hold for at least 2 seconds in the search mode to cancel.
Or, the search mode is canceled if no operation is performed for
60 seconds.
•
•
To search for files in the Folder Name Search mode, press ENTER.
Files in the folder may be searched.
What is WMA?
Press to exit Folder Name Search mode in step 3 in order to select
File Name Search mode.
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality sound
with small file sizes.
•
•
The root folder is displayed as “\ROOT”.
When Folder Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
format of audio compression used by MPEG2 or MPEG4.
File Name Search mode
Method for creating MP3/WMA/AAC files
1
2
During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
Audio data is compressed using software with MP3/WMA/AAC codecs.
For details on creating MP3/WMA/AAC files, refer to the user’s manual
for that software.
The “” indicator lights up.
MP3/WMA/AAC files that are playable on this device have the file
extensions “mp3” / “wma” / “m4a”. Files with no extension cannot be
played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are
not supported, neither are raw AAC files (using the “.aac” extension).
There are many different versions of the AAC format. Confirm that the
software being used conforms to the acceptable formats listed above.
It’s possible that the format may be unplayable even though the
extension is valid.
Turn the Rotary encoder to select File Name Search mode,
and then press ENTER.
3
4
Select the desired file by turning the Rotary encoder.
Press ENTER to play back the selected file.
Playback of AAC files encoded by iTunes is supported.
Notes
Supported playback sampling rates and bit rates
MP3
•
Press and hold for at least 2 seconds in the search mode to cancel.
Or, the search mode is canceled if no operation is performed for
60 seconds.
Press in the search mode to return to the previous mode.
When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
Sampling rates:
48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
•
•
Bit rates:
8 - 320 kbps
WMA
Sampling rates:
Bit rates:
48 kHz, 44.1 kHz, 32 kHz
48 - 192 kbps
Quick Search
AAC
Sampling rates:
48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
16 - 320 kbps
You can search for tracks (files).
Bit rates:
1
Press and hold ENTER for at least 2 seconds in the CD/
MP3/WMA/AAC mode to activate Quick Search mode.
This device may not play back correctly depending on sampling rates.
ID3 tags/WMA tags
The “” indicator lights up.
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric characters (up to
30 for ID3 tags and up to 15 for WMA tags) and the underscore. For
non-supported characters, “NO SUPPORT” is displayed.
If information contains characters other than ID3 tag information, the
audio file may not be played back.
2
Turn the Rotary encoder to select a desired track (file),
and then press ENTER.
The selected track is played back immediately.
Note
Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 10 seconds.
•
The tag information may not be correctly displayed, depending on the
contents.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW
using CD-R writing software. A disc can hold up to 510 files/folders
(including Root Folders), and the maximum number of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
About MP3/WMA/AAC
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs, and
CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember.
13-EN
The maximum nested folder depth is 8 (including the root directory).
The number of characters for a folder/file name is limited.
Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Sound Setting
Rotary encoder/ /ENTER
AUDIO/SETUP
Formats supported
This device supports CD-ROW XA, Mixed Mode CD, Enhanced CD
(CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with Track At
Once or packet writing.
Order of files
Files are played back in the order that the writing software writes them
to the disc. Therefore, the playback order may not be what is expected.
Verify the writing order in the software’s documentation. The playback
order of the folders and files is as follows.
*
The illustration is for CDE-123.
Root folder
Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Loudness/Defeat
1
Press AUDIO repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBW*1 BASS*2 MID*2 TREBLE*2 BAL FAD LOUD*2
DEFEAT VOLUME SUBW
*1 When the subwoofer mode is set to OFF, its level cannot be
*2 Adjustable only when DEFEAT is OFF.
Subwoofer
Bass level
Mid level
Treble level
Balance
0 ~ +15
-7 ~ +7
-7 ~ +7
Folder
MP3/WMA/AAC File
-7 ~ +7
*
The folder No./ folder Name will not be displayed if no file is contained
in the folder.
L15 ~ R15
R15 ~ F15
ON/OFF
ON/OFF
0 ~ 35
Fader
Loudness
Defeat
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Volume
Notes
•
If no operation is performed for 5 seconds, the unit automatically
Sampling rate
returns to normal mode.
•
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
Encoding
By setting DEFEAT ON, previously adjusted level settings of
BASS, MID, and TREBLE will return to the factory defaults.
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format.
Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.
14-EN
Setting the Bass Control
Sound Setting
1
After selecting BASS from the 3BAND EQ adjustment
mode, turn the Rotary encoder to select the desired Bass
setting item, and then press ENTER.
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
WIDTH (Q) CENTER FRQ LEVEL
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
Press to return to the previous step.
Setting the Bass Bandwidth (WIDTH (Q))
Turn the Rotary encoder to select AUDIO, and then press
Turn the Rotary encoder to select the desired bass
bandwidth.
ENTER.
BLUETOOTH*1 GENERAL AUDIO DISPLAY SXM SETUP*2
WIDE 0.50 MEDIUM 1.00 MEDIUM 1.50 NARROW 2.00
Changes the boosted bass bandwidth to wide or narrow. A wider setting
will boost a wide range of frequencies above and below the center
frequency. A narrower setting will boost only frequencies near the
center frequency.
iPod & USB
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO. (CDE-123 only)
*2 Displayed only when a SiriusXM Tuner is connected and the
current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/
CDE-123 only)
Setting the Bass Center Frequency (CENTER FRQ)
3
Turn the Rotary encoder to select the desired sound
Turn the Rotary encoder to select the desired bass center
frequency.
60 (Hz) 80 (Hz) (Initial setting) 100 (Hz) 120 (Hz)
setting menu, and then press ENTER.
FACTORY EQ*3/*4 3BAND EQ*3/*5 HPF*3 SUBWOOFER
SUBW LPF*6 SUBW PHASE*6 SUBW SYS*6
Emphasizes the displayed bass frequency ranges.
*3 Adjustment cannot be performed when DEFEAT is set to ON.
*4 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage.
Setting the Bass Level
*5 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage. In step 3, three sound adjustment items (Bass,
Mid and Treble) can be selected in 3BAND EQ mode, turn the
Rotary encoder to select the desired item, and then press
ENTER to continue to step 4.
Turn the Rotary encoder to select the desired bass level
(-7~+7) .
*
You can emphasize or weaken the bass level.
*
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
*6 These functions are inoperable when Subwoofer is set to OFF.
4
5
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select SUBWOOFER ON or SUBWOOFER OFF)
Setting the Mid Control
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
1
After selecting MID from the 3BAND EQ adjustment mode,
turn the Rotary encoder to select the desired Mediant
setting item, and then press ENTER.
Notes
•
•
Pressing returns to the previous Sound menu mode.
If no operation is performed for 60 seconds, Sound menu mode is
canceled.
WIDTH (Q) CENTER FRQ LEVEL
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
Equalizer Presets (FACTORY EQ)
Press to return to the previous step.
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting the Mid Bandwidth (WIDTH (Q))
USER FLAT POPS ROCK NEWS JAZZ ELEC
DANCE HIP HOP EASY LIS COUNTRY CLASSICAL
Turn the Rotary encoder to select the desired Mid
bandwidth.
Adjusting the Parametric Equalizer Curve
(3BAND EQ)
WIDE 0.75 MEDIUM 1.00 MEDIUM 1.25 NARROW 1.50
Setting the Mid Center Frequency (CENTER FRQ)
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can
be adjusted in this mode.
Turn the Rotary encoder to select the desired Mid center
frequency.
500 (Hz) 1.0k (Hz) (Initial setting) 1.5k (Hz) 2.5k (Hz)
15-EN
Setting the Mid Level
Turning Subwoofer ON/OFF
Turn the Rotary encoder to select the desired Mid level (-7
When the subwoofer is on, you can adjust the subwoofer output level
*
~ +7) .
You can emphasize or weaken the Mid level.
*
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Setting item: SUBWOOFER
Setting contents:
ON (Initial setting) / OFF
ON:
Setting the Treble Control
The subwoofer signal is output from the Subwoofer RCA
1
After selecting TREBLE from the 3BAND EQ adjustment
mode, turn the Rotary encoder to select the desired
Treble setting item, and then press ENTER.
OFF:
No subwoofer signal is output from the Subwoofer RCA
WIDTH (Q) CENTER FRQ LEVEL
Adjusting the Low Pass Filter
2
3
Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
The Low Pass Filter on this unit can be adjusted to suit your personal
taste.
Press to return to the previous step.
Setting item: SUBW LPF
Setting the Treble Bandwidth (WIDTH (Q))
Setting contents:
OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) / LPF 120 (Hz) /
LPF 160 (Hz)
All frequencies lower than the selected cutoff are output.
Turn the Rotary encoder to select the desired treble
bandwidth.
WIDE 0.75 NARROW 1.25
Setting the Subwoofer Phase
Setting the Treble Center Frequency (CENTER FRQ)
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder.
Turn the Rotary encoder to select the desired treble
center frequency.
7.5K (Hz) 10.0K (Hz) (Initial setting) 12.5K (Hz) 15.0K (Hz)
Setting item: SUBW PHASE
Setting the Treble Level
Setting contents:
NORMAL (Initial setting) / REVERSE
Turn the Rotary encoder to select the desired treble level
(-7~+7) .
*
Setting the Subwoofer System
You can emphasize or weaken the treble level.
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
desired subwoofer effect.
*
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Setting item: SUBW SYS
Setting contents:
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Adjusting the High Pass Filter
SUBW SYS 1:
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
Subwoofer level changes according to the main volume setting.
SUBW SYS 2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
Setting item: HPF
Setting contents:
OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)
All frequencies above the selected cutoff are output.
16-EN
About the indication display
Other Functions
When displaying Text, the following indicators are lit according to the
mode.
SOURCE/
MP3/WMA/
Indica-
tor/
Mode
iPod/
iPhone
Mode
Satellite
Radio
mode
AAC/USB
AUDIO
Mode
CD Mode
Folder
*2
Name
—
—
—
being dis-
played
Artist
Name
Artist
Name
Artist
Name
*1
*1
*1
—
being dis-
played
being dis-
played
being dis-
played
VIEW
BAND/ F/R
Text (Disc
*3
Album
Name
being dis-
played
Album
Name
being dis-
played
Content
info.
being dis-
played
*
The illustration is for CDE-123.
*1
*1
*4
Name
)
being dis-
played
Displaying the Text
Song
*1
Text ( Track
*3
Song
Name
being dis-
played
Name
/
Song Title
being dis-
played
*1
Name
)
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
File Name
being dis-
played
being dis-
played
Category
name
being dis-
played
—
—
—
Press VIEW.
The display will change every time the button is pressed.
Note
*1 Tag information:
•
When the TEXT SCR is set to SCR MANUAL, press and hold for at
least 2 seconds, the current text will be scrolled one time (except Radio
mode).
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
*2 The root folder is displayed as “\ROOT”.
*3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
The display in Radio mode:
FREQUENCY CLOCK FREQUENCY
*4 If there is no text information, nothing will be displayed.
The display in CD mode:
TRACK NO./ELAPSED TIME TRACK NO./CLOCK TEXT (DISC
NAME)*1 TEXT (TRACK NAME)*1 TRACK NO./ELAPSED TIME
About “Text”
The display in MP3/WMA/AAC mode:
Text compatible CDs contain text information such as the disc name and
track name. Such text information is referred to as “text”.
FILE NO./ELAPSED TIME (FOLDER NO./FILE NO.)*2 FILE NO./
CLOCK FOLDER NAME FILE NAME ARTIST NAME*3
ALBUM NAME*3 SONG NAME*3 FILE NO./ELAPSED TIME
Notes
•
•
•
Some characters may not be displayed correctly with this device,
*1 Displayed during playback of a disc with CD text.
*2 Only for MP3/WMA/AAC disc mode.
*3 ID3 tag/WMA tag
depending on the character type.
“NO SUPPORT” is displayed when the desired text information cannot
be displayed on this unit.
The text or tag information may not be correctly displayed, depending
on the contents.
If an MP3/WMA/AAC file contains ID3 tag/WMA tag
information, the ID3 tag/WMA tag information is displayed
(e.g., song name, artist name, and album name). All other
tag data is ignored.
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
17-EN
Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
SETUP
Portable player, etc.
Main unit
Rotary encoder/ /ENTER
AUDIO/SETUP
FAV
or
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
*
The illustration is for CDE-123.
Notes
Setting
•
This function is available only when AUX SETUP is set to ON. For
For CDE-123, during AUX source, you can switch to AUX REAR source
If a Flash Memory Device is directly connected to the front USB
terminal, the size or shape may interfere with driving operations,
therefore, avoid connecting an AUX input terminal and a Flash
Memory Device at the same time.
You can customize the unit to suit your own preferences and usage.
From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can
be modified.
•
•
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
2
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
Set your favorite source to the FAV button
(FAV SETUP)
Turn the Rotary encoder to select the desired item, and
then press ENTER.
BLUETOOTH*1 GENERAL AUDIO*2 DISPLAY SXM
You can set a favorite source to the FAV button by following steps. Once
this is set, you can switch to favorite source directly by pressing FAV.
SETUP*3 iPod & USB
(e.g. Select GENERAL)
BLUETOOTH:
BT IN
Set your favorite source
GENERAL:
1
2
Press and hold FAV for at least 2 seconds to activate FAV
setup mode.
CLOCK ADJ*4 FAV SETUP*5 PLAY MODE INT MUTE*6
AUX-R SET*9 AUX-R NAME*7 AUX SETUP AUX NAME*8
AUX GAIN*8 AUX-R GAIN*7 POWER IC DEMO
Turn the Rotary encoder to select a favorite source, and
then press ENTER.
DISPLAY:
DIMMER SCROLLTYPE TEXT SCR
The favorite source is set.
SXM SETUP: (SiriusXM Mode)
Notes
ALERTSETUP GAME ALERT P-LOCK SIGNAL IND
•
•
If you do not want to use this function, select “OFF”.
iPod & USB:
If no operation is performed for 10 seconds, the unit automatically
returns to normal mode.
USB SEARCH USB SKIP PANDORA PANDORA VL*10
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO. (CDE-123 only)
Recall your favorite source
*3 Displayed only when a SiriusXM Tuner is connected and the
current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/
CDE-123 only)
Once a source is set to FAV button, press FAV to recall the
source directly.
Note
Depending on the setting, even though you set a source to FAV, it may
not be available. For example, when you set AUX as your favorite
source and OFF is set in “Setting the AUX SETUP Mode” (refer to
“Setting the AUX SETUP Mode” on page 20), the AUX source will not
be recalled by pressing FAV.
*5 You can also set this in “Set your favorite source to the FAV
•
*6 For CDE-123, displayed only when BT IN is OFF.
*7 Displayed only when AUX-R SET is set to ON. (CDE-123 only)
*8 Displayed only when AUX SETUP is set to ON.
*9 CDE-123 only
*10 Displayed only when PANDORA is set to ON.
18-EN
3
4
5
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select POWER IC)
Notes
•
•
•
Depending on the setting, some item may not be selectable.
If you do not want to use this function, select “FAV OFF”.
This setting can also be activated by pressing and holding FAV for at
least 2 seconds.
Turn the Rotary encoder to change the setting, and then
press ENTER.
Playing MP3/WMA/AAC Data (PLAY MODE)
(e.g. Select POWER IC ON or POWER IC OFF.)
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•
•
Press to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting item: PLAY MODE
BLUETOOTH Setting (CDE-123 only)
Setting contents:
CD-DA (Initial setting) / CDDA/MP3
Select BLUETOOTH from the setup main menu in step 2 above.
CD-DA:
Only the CD data in Session 1 can be played back.
Setting the BLUETOOTH Connection
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
If an optional BLUETOOTH INTERFACE is connected, you can place a
hands-free call by a BLUETOOTH-equipped mobile phone. Make this
setting when the BLUETOOTH INTERFACE is connected and the
BLUETOOTH function is used. For details, refer to the Owner’s Manual
of the optional BLUETOOTH INTERFACE.
Note
•
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Setting item: BT IN
Turning Mute Mode On/Off (INT MUTE)
Setting contents:
OFF (Initial setting) / HFP / HFP+AUDIO
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
OFF:
This option does not allow this unit to recognize connection with
BLUETOOTH INTERFACE.
Setting item: INT MUTE
HFP:
Setting contents:
OFF AUX (Initial setting) / OFF AUX-R (CDE-123 only) / ON
Set this item when BLUETOOTH INTERFACE (KCE-250BT) is
connected. (Hands-free Phone is available, but the BT Audio
source is not displayed.)
OFF AUX:
HFP+AUDIO:
When the interrupt signal is received from device, the AUX source
volume will be output from the unit.
Set this item when BLUETOOTH INTERFACE (KCE-400BT) is
connected. (Hands-free Phone is available, and BT Audio source is
also available.)
OFF AUX-R (CDE-123 only):
When the interrupt signal is received from device, the AUX REAR
source volume will be output from the unit.
Notes
•
•
•
•
After the above setting, turn the ignition key off (ACC OFF) and on
ON:
When the interrupt signal is received from device, no sound will
be output.
again (ACC ON).
The w button can be used only when the optional BLUETOOTH
INTERFACE is connected.
If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
When INT MUTE is set to ON, the BLUETOOTH setting cannot be
made. When the BLUETOOTH INTERFACE is connected, set INT
Setting the AUX REAR Setup Mode (AUX-R SET)
(CDE-123 only)
You can input the audio of an external device, (such as a Portable audio
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
A portable music device and a BLUETOOTH INTERFACE cannot be
connected to the BLUETOOTH interface connector at the same time.
General Setting
GENERAL is selected on the setup main menu in step 2.
Setting item: AUX-R SET
Set your favorite source to the FAV button (FAV
SETUP)
Setting contents:
ON / OFF (Initial setting)
ON*:
You can select one source as your favorite source. Once this is set, you
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX REAR is selected, the sound of the portable
device is input to the unit.
can switch to favorite source directly by pressing FAV.
PANDORA F*1 PANDORA*2 PANDORA R*1 FM1 FM2 AM
AUX AUX REAR*1 DISC BT AUDIO*1 SIRIUSXM*3 USB*2
USB FRONT*1 USB REAR*1 FAV OFF
*
You can change the AUX-R NAME display when AUX-R SET is
set to ON. Press ENTER when AUX-R SET is set to ON,
and select AUX-R NAME by turning the Rotary encoder,
then press ENTER. After that, turn the Rotary encoder
to select the desired AUX-R NAME.
*1 CDE-123 only.
*2 CDE-124SXM/CDE-122 only.
*3 CDE-124SXM/CDE-123 only
19-EN
ON:
Note
•
When the PORTABLE is set, PMD is displayed on the unit.
Speakers
OFF:
SPEAKER
RIGHT FRONT
When set to OFF, AUX REAR source cannot be selected.
Front
right
Setting the AUX SETUP Mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
SPEAKER
RIGHT REAR
Rear
right
Setting item: AUX SETUP
Setting contents:
ON (Initial setting) / OFF
SPEAKER
LEFT REAR
ON*:
Rear
left
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
*
You can change the AUX NAME display when AUX SETUP is
set to ON. Press ENTER when AUX SETUP is set to ON,
and select AUX NAME by turning the Rotary encoder, then
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
SPEAKER
LEFT FRONT
Front
left
OFF:
Note
•
CDE-123:
When the PORTABLE is set, PMD is displayed on the unit.
OFF:
Front
left
When set to OFF, AUX source cannot be selected.
Amplifier
Amplifier
Front
right
Setting the AUX Level (AUX GAIN)
After setting to ON in “Setting the AUX SETUP Mode”, this setting can
be carried out.
Rear
left
Rear
right
Setting item: AUX GAIN
Setting contents:
LOW (Initial setting) / HIGH
CDE-124SXM/CDE-122:
LOW:
Decreases the external input audio level.
Front
left
HIGH:
Amplifier
Increases the external input audio level.
Front
right
Setting the AUX REAR Level (AUX-R GAIN)
(CDE-123 only)
Note
•
No sound is produced by the system when the power output is set to
OFF.
After setting to ON in “Setting the AUX REAR Setup Mode”, this setting
can be carried out.
Demonstration
Setting item: AUX-R GAIN
This unit has a demonstration feature for the display.
Setting contents:
LOW / HIGH (Initial setting)
Setting item: DEMO
LOW:
Decreases the external input audio level.
Setting contents:
DEMO ON / DEMO OFF (Initial setting)
HIGH:
Increases the external input audio level.
Note
•
To quit Demo mode, set to DEMO OFF.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
Setting item: POWER IC
Setting contents:
ON (Initial setting) / OFF
ON:
The speakers are driven by the built-in amplifier.
OFF:
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and cannot drive speakers.
20-EN
Display Setting
SiriusXM (SXM) Satellite Radio Setting
(CDE-124SXM/CDE-123 only) (Only when
a SiriusXM Tuner is connected and the
current source is Satellite Radio
(SIRIUSXM))
DISPLAY is selected on the setup main menu in step 2.
Dimmer Control
Set the Dimmer control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
SXM SETUP is selected on the setup main menu in step 2.
Setting item: DIMMER
Managing Artist and Song Alerts
Setting contents:
DIM AUTO (Initial setting) / DIM MANUAL
The following operations can be performed to change the Alert settings.
The Artist and Song Alerts feature allows you to mark Artists and Songs
from the current channel and then the unit alerts you later when the
marked Artists or Songs are playing on other channels.
Scroll Type Setting
Choose from two scrolling methods.
Select the type you prefer.
Setting item: ALERTSETUP
Setting contents:
ALERT LIST / ALERT / DELETE ALL
Setting item: SCROLLTYPE
ALERT LIST
Setting contents:
This menu option allows you to enable the Artist/Song alert for
individual Artist/Songs (ALERT ON or OFF) or to delete individual
stored Artist/Song alerts (DELETE).
SCR TYPE1 / SCR TYPE2 (Initial setting)
SCR TYPE1:
The characters scroll from right to left, a single character at a time.
1
2
3
Turn the Rotary encoder to select ALERT LIST and then press
ENTER.
SCR TYPE2:
Words are built up from left to right, a single character at a time.
When the display is filled, it is cleared and the remaining words are
displayed the same way until all words of the title have been
shown.
Turn the Rotary encoder to select a stored Artist or Song and
then press ENTER.
Turn the Rotary encoder to ALERT to enable (ALERT ON) or
disable (ALERT OFF) the alert for the selected Artist/Song or
turn the Rotary encoder to select DELETE to delete the
selected Artist/Song from memory.
Scroll Setting (TEXT SCR)
ALERT
This menu option allows you to temporarily disable the Artist/
Song Alerts for all Artists/Songs. When the Alerts are re-enabled,
individual Artist/Song Alert disabled in the ALERT LIST menu
setting remain disabled.
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names, tags and SiriusXM (SXM) Satellite Radio.
Setting item: TEXT SCR
Turn the Rotary encoder to select ALERT ON or OFF, and
then press ENTER.
If ON is set, the alert for all stored Artists/Songs is enabled.
If OFF is set, the alerts for all stored Artists/Songs are disabled.
Setting contents:
SCR AUTO / SCR MANUAL (Initial setting)
SCR AUTO:
DELETE ALL
The current text information of CD, folder, tag, etc. is scrolled
automatically.
This operation will delete all alerts (artists, songs and team) stored
in memory.
After selecting this item,
SCR MANUAL:
The display is scrolled when a disc is loaded or when a track is
changed, etc.
Turn the Rotary encoder to select DELETE YES, and then
press ENTER.
Note
Setting the Favorite Sports Team Alerts
•
The unit scrolls CD text names, folder names, file names or tag display.
This menu option allows you to select your favorite teams, organized by
leagues, so that you will be alerted later when your favorite teams are
playing on other channels.
Setting item: GAME ALERT
Setting content:
LEAGUE LIST
LEAGUE LIST
After selecting GAME ALERT, a sports league list will be displayed.
1
Turn the Rotary encoder to select the desired league, and
then press ENTER.
2
Turn the Rotary encoder to select a team you want to store,
and then press ENTER.
A “TEAM SAVED” pop-up screen is followed by an “X U(sed)/Y
E(mpty)”.
X is the total number of Artist/Song/Game alert items stored in
memory, and Y is the total number of memory slots still
available for storage.
Note
•
Select “NONE” on the team list if you do not want to store in
memory.
21-EN
Setting the Parental Control
iPod/iPhone and USB Setting
You can lock out channels with passcode protection. Channels that are
locked cannot be accessed without entering the passcode. You can
unlock a channel or change the passcode using this menu option.
“iPod & USB” is selected on the setup main menu in step 2.
Setting the USB Search Mode
Setting item: P-LOCK
The unit allows you to search for the USB Audio files by Tag information
or Explorer (FILE NAME) mode.
Setting contents:
CLEAR ALL / LOCKED CH / EDIT CODE
Setting item: USB SEARCH
How to input passcode?
Setting contents:
1
2
After select P-LOCK, a passcode input screen will be
displayed.
TAG (Initial setting) / FILE NAME
TAG:
When TAG is selected, you can use Playlists/Artists/Albums/Songs/
Genres/Composers/Folders/Files search mode to narrow searches.
Input the passcode using the Rotary encoder.
FILE NAME:
The initial default 4-digit passcode is set to 0000.
The passcode is entered one digit at a time with the Rotary
encoder.
When FILE NAME is selected, you can search a folder/file as search
files on PC.
For example, by turning to clockwise 2 steps, the number 1 is
selected.
After entering the digit, it is displayed as “*” (asterisk).
Notes
•
After the above setting, turn the ignition key off (ACC OFF) and on
again (ACC ON).
•
For search mode details, refer to “Searching for a desired Song” on
3
4
Press and then input the next digit of the passcode as
described in step 2.
Setting the USB Skip function
Repeat steps 2 to 3 until the 4 digits of the passcode are
entered and then press ENTER.
After the correct passcode is entered, the LOCKED CH/CLEAR
ALL/EDIT CODE items can be adjusted.
During Explorer (FILE NAME) searching, you can skip over designated
folders/files by pressing . For example, if you select 10FILE in the
Explorer (FILE NAME) searching mode, by pressing you can skip
forward 10 folders/files from the current folder/file; by pressing you
can skip backward 10 folders/files from the current folder/file. If the
folders/files searched are less than the assigned skipped-over ones,
pressing will skip to the first or last folder/file.
LOCKED CH:
After selecting this item, turn the Rotary encoder to select a
channel from channel list, press ENTER to select to lock or
unlock the channel. Locked channels cannot be tuned without
entering the passcode.
Setting item: USB SKIP
The locked channel will be displayed with “L” before channel No.
CLEAR ALL:
Setting contents:
10FILE (Initial setting) / 20FILE / 50FILE / 100FILE
Unlock all locked channels.
Turn the Rotary encoder to select CLEAR YES, and then press
ENTER.
Setting the Pandora Source
EDIT CODE:
Change the passcode.
You can select to turn on or off the Pandora source.
1
Input the old passcode as steps 1 to 4 in “How to input
passcode?”.
Setting item: PANDORA
After the old passcode is entered, the new passcode input
screen will be displayed.
Input the new passcode as steps 1 to 4 in “How to input
passcode?”.
Setting contents:
ON (Initial setting) / OFF
2
ON:
A confirm screen (CNFIRM) will be displayed and the new
passcode must be entered again for confirmation.
When the passcode is changed successfully, the unit will
display CODE SAVED.
The Pandora source can be switched by pressing SOURCE.
OFF:
The Pandora source is not available.
Note
Setting the Pandora Volume
•
Keep a note of the numbers somewhere safe in case you should
forget it.
When PANDORA is ON, you can adjust the Pandora source volume
memory.
Use this function to match the Pandora source volume to the other
sources, as closely as possible.
Confirming the strength of the SiriusXM signal
You can check the signal strength through this setting item.
Setting item: PANDORA VL
Setting item: SIGNAL IND
Setting contents:
0~ 9dB (The initial value is 0 dB)
Setting content:
SIGNAL IND
SIGNAL IND:
This menu item displays the SiriusXM signal strength as STRONG,
GOOD, WEAK or NO SIGNAL.
22-EN
Remove Flash Memory from Front USB
Connection Terminal
Flash Memory/Portable
audio player (optional)
1
2
Carefully, pull out the Flash Memory from the USB cable or
the USB Connection Terminal.
Close the cover of the USB Connection Terminal.
Rotary encoder/ /ENTER
SOURCE/
Notes
•
Change to a source other than the Flash Memory mode, then remove
the Flash Memory. If the Flash Memory is removed in the Flash
Memory mode, data may be damaged.
•
•
When removing Flash Memory, pull it out straight.
If sound is not output or Flash Memory is not recognized even when
Flash Memory is connected, remove Flash Memory once, and then
connection it again.
Route the USB cable away from another cables, etc.
After removing the Flash Memory, close the cover of the USB
Connection Terminal to prevent dust or foreign objects from entering
and causing a malfunction.
•
•
VIEW
BAND/ F/R
Preset buttons
(1 through 6)
•
On how to connect an Flash Memory to Rear USB Connector, refer to
*
The illustration is for CDE-123.
Connecting the Flash Memory (optional)
Using the Flash Memory/Portable audio
player Banking Function
If a Flash Memory device/Portable audio player is connected to the unit,
MP3/WMA/AAC files can be played back.
Note
Note
•
•
When TAG is set in “Setting the USB Search Mode” (refer to “Setting the
USB Search Mode” on page 22), in the USB mode, when this unit is
reset, ACC is switched from OFF to ON, or when the USB is connected
to this unit, “BANKING” is displayed for several seconds.
When a Flash Memory is connected, the following description is
available only when TAG is set in “Setting the USB Search Mode” (refer
What is a Bank?
There are two USB connectors on CDE-123, you can choose to connect
an Flash Memory to Front USB Connection Terminal or Rear USB
Connector. There is only one USB connector (Front USB Terminal) on
CDE-124SXM/CDE-122.
A bank is a unit of up to 1,000 songs, which is stored in memory.
“BANKING” refers to the grouping of songs available in Flash Memory, in
banks of 1,000 songs each. However, when a Flash Memory is
connected, 1BANK can store up to 1,000 songs under the following
conditions. Otherwise, the number of songs that can be stored may be
less than 1,000.
When connect Flash Memory to Front USB
Connection Terminal
Conditions (general estimate values)
Playlists: 20 (32 characters; 64 bytes)
Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
Albums: 100 (32 characters; 64 bytes)
Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
File Paths: 1,000 (128 characters; 256 bytes)
1
2
Open the cover of the USB Connection Terminal.
Connect the Flash Memory directly to the USB Connection
Terminal, or via the USB cable.
This unit
USB Connection Terminal
Flash Memory
(sold separately)
About Banking
While a bank is being built up, “BANKING” is displayed. Banking occurs
whenever a Flash Memory device/Portable audio player is connected or
after power to the head unit turns on.
or
It can take anywhere from a few seconds to up to several minutes for
banking to complete. This depends on the number of files and folders
in Flash Memory/Portable audio player.
Available operations while Banking
•
•
•
•
During Banking, the information display changes so the VIEW
operation is not available.
Flash Memory
(sold separately)
Cable (sold
separately)
With a song playing, Regular fast-forwarding and next song selection is
available.
While Banking, the song playback order may differ from the song order
in the Flash Memory device/Portable audio player.
Searching is not recommended during the Banking process as the
database is under construction at this time, and malfunction may result
in some cases.
23-EN
This unit has a BANK function that automatically divides every 1,000
songs stored in Flash Memory/Portable audio player into individual
banks to make searching and playing back a song easier. A maximum of
1,000 songs for one bank can be stored according to the order stored in
Flash Memory/Portable audio player. A maximum of 20 banks (20,000
songs) can be recognized.
Searching for a desired Song
You can select to search a song by Tag information or Explorer (FILE
NAME) mode. Before you search a song, select your desired search
mode in “Setting the USB Search Mode” (refer to “Setting the USB
Bank No.
Bank1
Bank2
Song number
1~1,000
Searching by Tag information
1,001~2,000
Before performing the following procedures, make sure TAG is selected
in “Setting the USB Search Mode” (refer to “Setting the USB Search
Bank20
19,001~20,000
A Flash Memory Device or Portable audio player can contain hundreds
of songs. By using file tag information and keeping these songs
organized in playlists, this unit’s search functions will ease song searches.
Playback
*1
Each music category has its own individual hierarchy. Use the Bank
/
*2
Playlists /Artists/Albums/Songs/Genres/Composers/Folders/Files
The following table shows which file can be played on which models.
search mode to narrow searches based on the table below.
MP3
WMA
AAC
Hierarchy
1
Hierarchy
2
Hierarchy
3
Hierarchy
4
Hierarchy
5
CDE-124SXM/
CDE-122
*1
*2
Bank
Playlist
Song
—
Song
—
—
—
CDE-123
*1
*
*
Bank
Artist
Album
*1
*
Bank
Album
Song
—
—
1
2
Press SOURCE to select the USB mode.
*1
Bank
Song
—
—
For CDE-123, depending on which USB Connector you used,
press BAND/F/R to switch USB source between FRONT and
REAR.
*1
*
*
*
Bank
Genre
Artist
Album
Song
—
*1
*
*
Bank
Composer
Folder
File
Album
Song
—
*1
Bank
File
—
—
Press or to select the desired track (file).
*1
Bank
—
—
Pressing and holding or will fast backward/fast
forward track continuously.
*1 A maximum of 1,000 songs for one bank can be stored according to
the order stored in Flash Memory/Portable audio player. However,
song stored order in bank may differ from the song order in the Flash
Memory device/Portable audio player in some case.
*2 Playlist search is not available when a Portable audio player is
connected.
Note
•
Depending on the connected portable audio player, fast-forwarding/
fast-reversing may not be available.
3
To pause playback, press .
Pressing again will resume playback.
For example:
Searching by Artist name
Notes
The following example explains how an Artists search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
•
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
Searching by artist name
•
•
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
If there is tag information, artist name/album name/track name is
displayed.
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
“NO SUPPORT” is displayed when text information is not compatible
with this unit.
Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
1
2
Press ENTER to activate the search selection mode.
Turn the Rotary encoder to select a desired Bank, and
then press ENTER.
“BANKING” may be displayed for a few seconds.
•
•
•
3
Turn the Rotary encoder to select the Artist search mode,
and then press ENTER.
PLAYLIST ARTIST ALBUM SONG GENRE COMPOSER
FOLDER FILE PLAYLIST
4
5
6
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
Turn the Rotary encoder to select an album, and then
press ENTER.
Turn the Rotary encoder to select a song and press
ENTER.
The selected song is played back.
24-EN
Searching by Explorer (FILE NAME) mode
(Flash Memory only)
Repeat Play
1
Press a 4.
The song is played back repeatedly.
Before performing the following procedures, make sure FILE NAME is
selected in “Setting the USB Search Mode” (refer to “Setting the USB
Flash Memory can contain hundreds of songs. By organizing songs by
folder, you can quickly find a desired folder/file. This operation is
similar to search a folder/file from PC.
When a song is searched by Tag information
a*1 a*2 a*3 (off) a
When a folder/file is searched by Explorer (FILE NAME) mode (Flash
Memory only)
a*1 a*4 (off) a
1
2
Press ENTER to activate the search mode.
*1 Only a file is repeatedly played back.
*2 According to the artist information of the current song, a playlist
about all the songs with the same artist of the Bank are made
into a playlist, which then starts to play back.
Turn the Rotary encoder to select a desired folder/file.
When a folder is searched, indicator lights up.
When a file is searched, indicator lights up.
*3 According to the album information of the current song, a
playlist about all the songs with the same album of the Bank are
made into a playlist, which then starts to play back.
*4 Only files in a folder are repeatedly played back.
3
Press ENTER to play the selected file or enter the
selected folder.
Press and hold ENTER for at least 2 seconds to play back all
2
To cancel repeat play, select (off) with the above
procedure.
songs in the selected folder.
4
Repeat steps 2 to 3 until the desired folder/file is found
when a folder is entered in step 3.
Note
•
During repeat play, setting M.I.X. to ON will cancel the repeat play.
Notes
•
•
•
When a portable audio player is connected, even though FILE NAME is
set in “Setting the USB Search Mode” (refer to “Setting the USB Search
Mode” on page 22), the Tag information search mode will be applied.
In the Tag search mode, after pressing and holding ENTER for at
least 2 seconds while in each hierarchy (except Song and File hierarchy),
all songs of the selected hierarchy are played back.
M.I.X. (Random Play)
1
Press 5 s.
The songs are played back in random sequence.
*
After selecting [ALL] in the Tag search mode with “ ”, press and hold
When a song is searched by Tag information
s*1 s ALL*2 (off) s
ENTER for at least 2 seconds to play back all songs in the selected
search mode.
When a folder/file is searched by Explorer (FILE NAME) mode (Flash
Memory only)
s*3 s ALL*4 (off) s
•
•
Even if the songs belong to the same playlist, they may be saved as
different BANK.
While in the search mode, if you press and hold for at least
2 seconds, or no operation is performed for 60 seconds, the search mode
is canceled.
*1 Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
*2 All songs in the current Bank are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
*3 All songs in the current folder are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
•
•
The root folder of Flash Memory/Portable audio player is displayed as
“\ROOT”.
When the bank is changed during Repeat play, the Repeat play will be
canceled.
In the search mode, pressing will return to the previous mode.
When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
•
•
•
•
•
•
If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
In the Tag search mode, a search can be made quickly by Alphabet skip
function to find the desired artist or song, etc. For details, refer to
In the Explorer (FILE NAME) search mode, a search can be made
quickly by USB Skip function to find the desired folder/file. For details,
When searching for a song, artist, etc., in Flash Memory, the display
order may be incorrect if the character code of the file tag information is
mixed.
*4 All songs in the Flash Memory are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
2
To cancel M.I.X. play, select (off) with the above procedure.
Notes
•
When a song is played back during Random (M.I.X.) play in the USB
mode, the song can be played back again randomly even if not all songs
in the current Bank or Flash Memory have been played back.
During M.I.X. play, setting repeat play to ON will cancel the M.I.X.
play.
•
•
During repeat play, etc., the track number display for M.I.X. play may
be incorrect.
25-EN
Select Playlist/Artist/Album/Genre/
Composer/Folder
iPod/iPhone (optional)
*
Playlist /Artist/Album/Genre/Composer/Folder can be easily changed.
Rotary encoder/ /ENTER
SOURCE/
For example, if you listen to a song from a selected album, the album can
be changed.
*
Press or to select the desired Playlist /Artist/Album/
Genre/Composer/Folder.
*
This item is invalid when a portable audio player is connected.
Notes
•
•
•
•
•
If the song search mode was used to select a song, this function is
inactive.
VIEW
6
BAND/ F/R
If an album is selected during an artist search, other albums by that
artist are searchable.
Preset buttons
(1 through 6)
For Flash Memory, this function is inactive during M.I.X. ALL/M.I.X.
Song playback.
*
The illustration is for CDE-123.
For Portable audio player, this function is inactive during M.I.X.
playback.
This function is inactive during RPT ALBUM/RPT ARTIST playback.
Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (CDE-124SXM/CDE-122, sold separately; CDE-123,
supplied). When an iPod/iPhone is connected to this unit, you can
choose to control the iPod/iPhone using its own controls or by the head
unit controls. For details, refer to “Setting the iPod Control” on page 27.
The Owner’s Manual only introduces on how to control an iPod/iPhone
via this unit. So before the following operation, make sure to set HEAD
UNIT in “Setting the iPod Control” (refer to “Setting the iPod Control”
on page 27). On how to control an iPod/iPhone on itself, refer to
Owner’s Manual of iPod/iPhone.
Alphabet Skip Function (Tag search mode
only)
The initial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing .
During Tag search mode, press or to perform the
Alphabet Skip Function.
Notes
A list is skipped to the next number, symbol or letter.
•
Internet and telephone functions of the iPod touch or iPhone, etc., can
also be used while connected to this unit. Using these functions will stop
or pause the currently playing songs. During this time, do not operate
the unit to avoid a malfunction.
Notes
•
Characters defined for skipping are from the UTF-16 standard common
in many computer systems.
•
If the Song search mode is activated in Playlist search, this function is
invalid.
•
•
If you connect an iPhone to CDE-123, it can be used as an iPod. If you
use iPhone as a hands-free phone, you need the optional BLUETOOTH
INTERFACE.
There are two USB connectors on CDE-123, you can choose to connect
an iPod/iPhone to Front USB Connection Terminal or Rear USB
Connector. On how to connect an iPod/iPhone to this unit, refer to
Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
Quick Search
You can search for a song from all songs in current bank of Flash
Memory/Portable audio player without selecting an album, artist, etc.
•
About iPod/iPhone models usable with this unit
1
2
Press and hold ENTER for at least 2 seconds to activate
Quick Search mode.
•
Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.4.2.1
iPod nano (6th generation): Ver.1.0
Turn the Rotary encoder to select a desired track (file).
The selected track is played back immediately.
iPod touch (3rd generation): Ver.4.2.1
iPod nano (5th generation): Ver.1.0.2 PC
iPod classic (160GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120GB): Ver.2.0.1
Note
Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 10 seconds.
•
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3 PC
iPod classic (80GB, 160GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
Search Position Memory
During playback, you can quickly return to the last-selected hierarchy
level in the search mode.
iPod nano (1st generation): Ver.1.3.1
Confirmed devices regarding Made for iPhone. Correct function of
earlier versions cannot be guaranteed.
iPhone 4: Ver.4.2.1
Press .
•
The hierarchy you selected last in the search mode is displayed.
26-EN
iPhone 3GS: Ver.4.2.1
Hierarchy 1
Song
Hierarchy 2
—
Hierarchy 3
Hierarchy 4
iPhone 3G: Ver.4.2.1
—
—
—
—
iPhone: Ver.3.1.3
Podcast
Episode
•
•
For clarity in identifying your model of iPod, please see Apple’s own
HT1353
*
*
*
Genre
Artist
Album
Song
—
*
*
Composer
Album
Song
—
This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable.
Audiobook
—
—
For example:
Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Setting the iPod Control
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
2
Press ENTER to activate the search selection mode.
The “” indicator lights up.
Press and hold ENTER for at least 2 seconds to switch
iPod control mode between HU (HEAD UNIT) and iPod.
Turn the Rotary encoder to select the ARTIST search
mode, and then press ENTER.
PLAYLIST ARTIST ALBUM SONG PODCAST GENRE
COMPOSER AUDIOBOOK PLAYLIST
Once the control mode is changed, this will set pause status,
press to continue.
HU (HEAD UNIT):
Operate the iPod/iPhone via this unit.
iPod:
3
4
5
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
Operate the iPod/iPhone using its own controls. When iPod is
selected, some functions will not be operable via the head unit.
Note
Turn the Rotary encoder to select the desired Album, and
then press ENTER.
•
Depending upon the iPod used, iPod control may not be selectable. Or,
if iPod is selected, operation must still be from the head unit.
Turn the Rotary encoder to select the desired Song, and
then press ENTER.
Playback
Notes
•
This function is unavailable when iPod is selected in “Setting the iPod
1
Press SOURCE to switch to the iPod mode.
After pressing and holding ENTER for at least 2 seconds while in
each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs
of the selected hierarchy are played back.
•
For CDE-123, depending on which USB Connector you used,
press BAND/F/R to switch iPod source between FRONT and
REAR.
*
•
•
After selecting [ALL] in the search mode with “ ”, press and hold
ENTER for at least 2 seconds to play back all songs in the iPod/
iPhone or selected search mode.
2
3
Press or to select the desired song.
Pressing and holding or will fast backward/fast
forward the current track.
While in the search mode, if you press and hold for 2 seconds, or no
operation is performed for 60 seconds, the search mode is canceled.
In the search mode, pressing will return to the previous mode.
When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
•
•
To pause playback, press .
Pressing again will resume playback.
•
•
•
•
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
Notes
•
•
•
A song playing on the iPod/iPhone while it is connected to this unit will
“NO PODCAST” will be displayed if there is no podcast data in the
iPod/iPhone in the PODCAST search mode.
continue to play from where it was paused after disconnection.
If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing or .
“NOAUDIOBOK” will be displayed if there is no audiobook data in the
iPod/iPhone in AUDIOBOOK search mode.
An episode may have several chapters. The chapter can be changed by
pressing or .
If “iPod name” stored in the iPod/iPhone is selected in the desired
Playlist search mode, and ENTER is pressed, you can search for all
songs in the iPod/iPhone. Also, if you press and hold ENTER for at
least 2 seconds, all songs in the iPod/iPhone are played back.
Depending on the iPod/iPhone, podcast search is not supported.
If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
•
•
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlist
Song
—
Song
—
—
—
—
*
*
Artist
Album
*
Album
Song
27-EN
Direct Search Function
Search Position Memory
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song.
During iPod/iPhone playback, you can quickly return to the
last-selected hierarchy level in the search mode.
Press .
The hierarchy you selected last in the search mode is displayed.
In the search mode, press any one of the preset buttons (1
through 6) to quickly skip over a designated percent of
your song content.
Note
•
This function is unavailable when iPod is selected in “Setting the iPod
Song search example:
If there are 100 songs in your iPod/iPhone, they are divided into 6
groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Random Play Shuffle (M.I.X.)
Example 1:
The Shuffle function of the iPod/iPhone is displayed as s on this unit.
Suppose the song you are searching for is located at around the
middle (50%) of your library: press button 4 to jump to the 50th
song and turn the Rotary encoder to find the desired song.
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is selected
randomly. This continues until all albums have been played.
Example 2:
Suppose the song you are searching for is located near the end
(83%) of your library: press button 6 to jump to the 83rd song
and turn the Rotary encoder to find the desired song.
Shuffle Songs:
Song shuffle randomly plays back songs within a selected category
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
All 100 songs (100%)
0%
17%
33%
50%
67%
83%
1
2
Press 5 s.
Preset
buttons
1
2
3
4
5
6
The songs are played back in random sequence.
*1
*2
s s (off) s
1st
song
17th
song
33rd
song
50th
song
67th
song
83rd
song
Songs
*1 Shuffle Albums.
*2 Shuffle Songs.
To cancel M.I.X. play, select (off) with the above procedure.
Select Playlist/Artist/Album/Genre/
Composer/Episode
Note
•
If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle Albums
is selected.
Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.
For example, if you listen to a song from a selected album, the album can
be changed.
Shuffle ALL:
Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
song does not play back again until all songs have been played back.
Press or to select the desired Playlist/Artist/Album/
Genre/Composer/Episode.
1
Press 6.
The songs are played back in random sequence.
s ALL (off) s ALL
Notes
•
•
•
If the song search mode was used to select a song, this function is
*
Shuffle ALL.
inactive.
If an album is selected during an artist search, other albums by that
artist are searchable.
2
To cancel M.I.X. play, select (off) with the above procedure.
This function is inactive during shuffle (M.I.X.) playback.
Notes
•
If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
•
This function is unavailable when iPod is selected in “Setting the iPod
Alphabet Skip Function
The initial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing .
During search mode, press or to perform the
Alphabet Skip Function.
A list is skipped to the next number, symbol or letter.
28-EN
Repeat Play
Pandora Radio (iPhone)
(Optional)
Only Repeat One is available for the iPod/iPhone.
Repeat One:
A single song is repeatedly played back.
Rotary encoder/ /ENTER
SOURCE/
1
Press a 4.
The song is played back repeatedly.
1
2
*
a (off) a
*
Repeat One.
2
To cancel repeat play, select (off) with the above
procedure.
Note
Depending on the connected iPod, track up/down may be not available
during Repeat play.
•
VIEW
BAND/ F/R
*
The illustration is for CDE-123.
Displaying the Text
Pandora Radio is your own FREE personalized radio now available to
stream music on your iPhone.
You can display the tag information of a song in the iPod/iPhone.
Just start with the name of one of your favorite artists, songs or classical
composers and Pandora will create a “station” that plays their music and
more music like it.
Press VIEW.
Each press changes the display.
The CDE-124SXM/CDE-123/CDE-122 enables you to interact with
your Pandora account, by connecting an iPhone that has the Pandora
Compatible Application for iPhone already installed.
For details on the Pandora Compatible Application for iPhone, visit:
To control Pandora through this CDE-124SXM/CDE-123/CDE-122,
you must be running a version of Pandora’s mobile application that
supports Pandora link, on a compatible smartphone. For information on
Note
•
When the TEXT SCR is set to SCR MANUAL, press and hold for at
least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME*
ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME
*
TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
Notes
Notes
•
•
•
•
Only alphanumeric characters (ASCII) can be displayed.
The maximum number of characters for the head unit is 128 (128 byte).
Some characters may not be correctly displayed.
“NO SUPPORT” is displayed if text information is not supported by the
unit.
•
Some of the Pandora Compatible Application for iPhone functions are
not controllable from the CDE-124SXM/CDE-123/CDE-122.
•
Pandora is also controllable from an iPod touch with Wi-Fi connection.
Listening to Pandora
1
2
Launch the Pandora Application on the iPhone.
Press SOURCE to switch to the PANDORA mode.
Notes
•
•
•
For CDE-123, depending on which USB Connector you used, press
BAND/F/R to switch Pandora source between FRONT and REAR.
The Pandora source can be displayed only when PANDORA is set to
When PANDORA VL is set to other than 0 dB in “Setting the Pandora
source volume may be higher than other sources.
3
4
To pause playback, press .
Pressing again will resume playback.
To skip to the next song, press .
Notes
•
•
The operation to replay a previous song is not available.
Pandora limits the number of skips allowed on their service. If you
attempt to skip songs beyond the limit, “SKIP LIMIT” is displayed.
29-EN
•
CDE-124SXM/CDE-123/CDE-122 remembers the source just before
turning off the power. Even if you reconnect an iPod/iPhone without
launching Pandora Application while the power is off, Pandora mode
(not iPod mode) is displayed when power is turned back on.
Depending on the signal status, song may be stopped during playback.
The display content may various when advertisement is received.
The playback time may not be correctly displayed.
QuickMix
Use QuickMix to create a playlist based on two or more of your Pandora
stations. Edit your QuickMix station selections on the Pandora
Compatible Application for iPhone when it is not connected to the
CDE-124SXM/CDE-123/CDE-122.
•
•
•
1
2
Press ENTER to activate the Search mode.
“Thumbs” Feedback
Turn the Rotary encoder to select “A-Z” or “BY DATE”, and
then press ENTER.
The “A-Z” or “By Date” search mode is activated and the station
name is displayed.
You can personalize your stations with “Thumbs Up” or “Thumbs
Down” feedback, which the system takes into account for future music
selections.
During playback, press u or d for thumbs up or thumbs
down.
3
Press ENTER while selecting “QUICKMIX”.
Notes
•
The songs from the created stations are played back in random
u: The “u” indicator appears in the display. Pandora will
sequence.
add similar music to your station.
•
Select other station during search mode to cancel QuickMix.
d: The “d” indicator is displayed. Pandora will ban that
song from your station, and the current song is skipped.
If the number of skips allowed has reached its limit, the
current song continues to play back.
Bookmarking a Desired Song or Artist
The currently playing song or artist can be bookmarked and saved to
your Pandora account.
Note
•
In some situations, “Thumbs” feedback may not be available.
1
2
During playback, press 1b (Bookmarks).
The Pandora Bookmark screen is displayed.
Searching for a Desired Station
Turn the Rotary encoder to select “SONG (Bookmark)” or
“ARTIST (Bookmark)”, and then press ENTER.
The current song or artist is bookmarked. “BMK SONG” or “BMK
ARTIST” is displayed.
You can display your station list and select stations directly from the
CDE-124SXM/CDE-123/CDE-122.
Alphabet Search:
Notes
1
2
Press ENTER to activate the Search mode.
•
Your bookmarks can be viewed on your “Profile” page at
Turn the Rotary encoder to select “A-Z”, and then press
ENTER.
•
•
In some situations, bookmarks may not be available.
When Bookmark operation is failed, BMK N/A will be displayed.
The “A-Z” search mode is activated and the station names are
listed alphabetically.
Creating a New Station
3
Turn the Rotary encoder to select the desired station, and
then press ENTER.
Pandora will play that station.
Based on currently playing song or artist, you can create a new station
and save to your Pandora account.
Search by Date Added:
1
2
During playback, press n 2 (New Station).
The Pandora New Station screen is displayed.
1
2
Press ENTER to activate the Search mode.
Turn the Rotary encoder to select “SONG” or “ARTIST”, and
then press ENTER.
Turn the Rotary encoder to select “BY DATE”, and then
press ENTER.
A “NEW SONG” or “NEW ARTIST” pop-up screen.
A New Station based on current song or artist is created.
The “By Date” search mode is activated and the station names
are listed by the date they were added to the account.
Notes
3
Turn the Rotary encoder to select the desired station, and
then press ENTER.
Pandora will play that station.
•
Your New Station can be viewed on your “Profile” page at
•
In some situations, creating a new station function may not be
available.
Note
•
•
•
When this operation is failed, N/A will be displayed.
When the iPhone is not connected to this unit, you can create
personalized Pandora stations using the Pandora Application on your
If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
30-EN
Search Position Memory
SiriusXM Satellite Radio
Operation (CDE-124SXM,
supplied; CDE-123,
optional)
During playback, you can quickly return to the last-selected hierarchy
level in the search mode.
Press .
The hierarchy you selected last in the search mode is displayed.
Changing the Display
Rotary encoder/ /ENTER/ Tag
SOURCE/
Press VIEW.
*
Elapsed Time
Artist Name
Elapsed Time
Station Name
Song Title
Clock
*
*
*
Album Name
*
TAG information
If there is no text information, nothing will be displayed.
FUNC./VIEW
Preset buttons
(1 through 6)
BAND
Notes
•
•
•
Only alphanumeric characters can be displayed.
The maximum number of characters is 128 (128 byte).
Some characters may not be correctly displayed.
*
The illustration is for CDE-123.
SiriusXM Tuner operation:
When a SiriusXM Tuner is connected to this unit, the following
operations may be performed.
Receiving Channels with the SiriusXM Tuner
(CDE-124SXM, supplied; CDE-123, optional)
About SiriusXM Satellite Radio
Everything worth listening to is on SiriusXM. get over 130 channels,
including the most commercial-free music, plus the best sports, news,
talk and entertainment. A SiriusXM Tuner and Subscription are required.
Note
•
The SiriusXM Satellite Radio controls on this unit are available only
when a SiriusXM Tuner is connected.
1
Press SOURCE to activate the Satellite Radio
(SIRIUSXM) mode.
2
Press or to select the desired channel.
Holding down or will rapidly browse through the
channels.
Alternatively, you can enter the number of the desired channel
using the numeric keypad on an optional remote control.
31-EN
Checking the SiriusXM Radio ID Number
Category Browsing
To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:
1
Press or in the SiriusXM mode to activate the
Category Browsing mode.
2
3
Press or to select desired category.
Turn the Rotary encoder to select a desired channel
within the selected Category , and then press /ENTER.
1
While in the Satellite Radio Mode, press or to
select channel “0”.
Note
If no operation is performed for 10 seconds, the Category Browsing
mode is canceled.
The unit displays “RADIO ID” and ID number alternately.
•
Note
•
The Radio ID does not include the letters I, O, S or F.
2
To cancel the ID number display, select a channel other
than “0”.
Storing the desired Artist/Song
While listening to SiriusXM Satellite Radio, you can be alerted when
your favorite songs or artists are playing on other channels. An
interruption ALERT will be displayed when a matching artist or song is
found on another channel. For receiving interruption ALERT
Storing Channel Presets
1
2
3
Press BAND to select the desired band you want to store
the preset in.
1
Press and hold FUNC./VIEW for at least 2 seconds when a
Song or the song of an Artist you want to store is playing.
There are 3 Satellite Radio Preset bands.
Each press of BAND changes the band: SXM1 SXM2 SXM3
SXM1
The indicator lights up.
2
Press the 1 (preset) button to store the Artist/Song.
A note to memorize the ART (artist name) or the SNG (song title)
is displayed.
Tune to the desired channel and then press and hold one
of the preset buttons (1 through 6), for at least 2 seconds,
to store the channel.
The display then shows the stored Band and preset number (for
example, SXM1-3 is shown when preset 3 of band 1 is selected).
Note
•
If either the artist name or song title is not available to save,
UNAVAILABL will be displayed.
Repeat the procedure to store up to 5 other channels onto
the same band.
3
4
Turn the Rotary encoder to choose SAVE ART or SAVE SNG
(when available) and then press ENTER.
Notes
•
A total of 18 channels can be stored in the preset memory, 6 Channels
The new alert was stored in memory.
for each band (SXM1, SXM2 and SXM3).
If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the new
one.
An “ART/SONG SAVED” pop-up screen is followed by an “X
U(sed)/Y E(mpty)”.
•
X is the total number of song titles or artist names stored in
memory, and Y is the total number of memory locations still
available for storage.
Tuning Channels using Presets
Notes
•
If you try to store when the memory is full, “MEM FULL” is displayed
followed by “REPLACE/CANCEL”. If you want to replace an existing
alert item, select “REPLACE” by turning Rotary encoder, and then
press ENTER, the existing alert list stored in memory is displayed.
Select one of the stored alerts using the Rotary encoder. To replace the
selected alert, press ENTER and an “ART/SONG SAVED” pop-up
screen is followed by an “X U(sed)/Y E(mpty)”.
You can manage the stored Alert memory setting on Setup mode, for
If no operation is perform for 10 seconds, the setting mode is canceled.
1
2
Press BAND to select the desired band of Presets you wish
to access.
Press the preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in memory.
•
•
32-EN
Receiving and Tuning to an Alert
Using Jump Memory and Jump Recall
function
Whenever a stored sports team, artist, or song is playing on another
channel, an interruption ALERT appears on the unit display. To tune to
the game, artist or song identified by the alert, follow the steps below:
1
2
3
While in SiriusXM mode, select your favorite SiriusXM
Channel.
1
2
Turn the Rotary encoder to select the desired game, artist
or song from the list of active alerts.
Press and hold for at least 2 seconds.
The channel you selected is stored as the Jump Source.
Press ENTER.
Press and hold for at least 2 seconds to recall and tune
to the saved Jump Source channel.
Notes
•
If no operation is performed for 5 seconds, the unit returns to normal
mode.
Note
•
Sports teams/Artist name and Song title which you have stored and
which are currently playing will be displayed in a category called “MY
GAMES”/“MY MUSIC” in search mode. For details, refer to “Search
•
Pressing and holding again for at least 2 seconds will jump back to
the previous mode or SiriusXM channel.
Instant Replay Function
Search Function
In SiriusXM mode, you can pause, rewind and replay up to 30 minutes
of live SiriusXM Satellite Radio.
You can search for SiriusXM programming content by Category or by
Channel.
1
While listening to a SiriusXM channel, press to enter
the Replay mode, which mutes the audio.
1
2
Press ENTER in the SiriusXM mode.
The display will show “PAUSED” while in this mode.
Turn the Rotary encoder to select the desired Category,
and then press ENTER.
2
Press again to resume playback of the stored audio
from the point at which it was paused.
During playback, the SiriusXM Tuner will continue to store the
channel audio until you exit the Instant Replay mode (up to 30
minutes).
3
Turn the Rotary encoder to select the desired Channel
Name, and then press ENTER.
Notes
•
•
During REPLAY playback:
During channel search, pressing or to select another Category.
•
•
•
Fast rewind:
Press and hold .
Fast forward:
Press and hold .
Returning to the beginning of the current song:
Press . (If you press in the first 2 seconds of a song,
you return to the beginning of the previous song.)
Advancing to the beginning of the next song:
Press .
The Search mode is canceled if you press and hold for at least
2 seconds, or no operation is performed for 60 seconds in Search mode.
During Channel search, You can toggle the display between the channel
name list, artist name list and the song/program title list by pressing
VIEW.
•
•
When GAME ALERT is set to ON (refer to “Managing Artist and Song
Alerts” on page 21) and receives a match to one of your favorite teams
GAMES” category will be created and will display all stored sports
teams that are currently playing at that time. The MY GAMES category
list will also be accessible via the Search function. To select a game,
follow steps 2 and 3 above.
•
Notes
•
If you continue to press Fast forward until the end, the Instant Replay
mode is canceled, and the unit will change to live SiriusXM radio
mode.
•
•
When either an ARTIST or SONG ALERT program match has been
found, the “MY MUSIC” category list will be created and will be
accessible via the Search function. To select a Song or Artist from the
list, follow steps 2 and 3 above.
•
If you change channels while in Replay mode, the unit will exit Replay
mode to live Satellite Radio mode and clear the Replay memory.
Press in the search mode to return to the previous mode.
3
Press to cancel the INSTANT REPLAY mode.
The unit returns to live SiriusXM radio mode.
Using iTunes tagging
iTunes Tagging lets you tag songs you hear on SiriusXM channels with
your new CDE-124SXM/CDE-123 and then preview, buy, and
download them later from your iTunes Tagged playlist the next time you
sync your iPod/iPhone.
Note
•
For details on the iPod/iPhone models usable with this unit, refer to
1
A song may be tagged while listening to a SiriusXM
channel if the display shows the "Tag" icon.
33-EN
2
3
Press and hold Tag for at least 2 seconds while the desired
song is playing.
Information
The “Tag” blinks at the same time the “TAGGING” is displayed.
When completed, “TAG STORED” is displayed and the
*
“Tag” indicator lights up .
In Case of Difficulty
*
When completed, “TAG COUNT X” (X is the total amount of
stored tag information) is displayed if no iPod/iPhone is
connected.
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Notes
•
During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
When the memory of iPod/iPhone is full, “iPod FULL” is displayed. The
tag information will be stored to the unit.
If the tagging operation is interrupted by a source or channel change,
the tagging operation will be canceled and the unit may not display
“CANNOT TAG”.
This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “MEMO FULL” may be displayed.
When an iPod that doesn't support the tagging function is connected,
“NON-TAGGING IPOD” may be displayed.
When the iPod/iPhone is disconnected from the unit during tagging, its
tag information will be stored in the unit.
If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information will
be transferred to the iPod/iPhone automatically. When the iPod/iPhone
memory becomes full, “iPod FULL” will be displayed, and any
remaining tag information on the unit will not be transferred to the
iPod/iPhone.
If tag information already exists, “ALREADY TAGGED” will be
displayed when you try to tag information again.
Tagging may be canceled by changing the frequency or station, and the
message “CANNOT TAG”, etc., may not be displayed.
If a song is tagged and the remaining storage volume of the connected
iPod/iPhone is sufficient to hold the song’s tag information, it will be
saved on the iPod/iPhone.
If there is stored tag information on CDE-123, when two iPod/iPhone
models supporting the tag function are connected, the Tag information
will be transferred to the iPod/iPhone with which the USB terminal is
activated automatically. When the iPod/iPhone memory becomes full,
“iPod FULL” will be displayed, and any remaining tag information on
the unit will not be transferred to the iPod/iPhone.
•
•
Basic
No function or display.
Vehicle’s ignition is off.
•
–
If connected following instructions, the unit will not operate with
the vehicle’s ignition off.
•
•
•
•
•
•
Improper power lead (Red) and battery lead (Yellow) connections.
Check power lead and battery lead connections.
Blown fuse.
–
–
Check the fuse of the unit; replace with the proper value if
necessary.
•
Internal micro-computer malfunctioned due to interference noise
etc.
–
Press the RESET switch with a ballpoint pen or other pointed
article.
•
•
•
Radio
Unable to receive stations.
No antenna or open connection in cable.
•
–
Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
•
Unable to tune stations in the seek mode.
You are in a weak signal area.
•
–
Make sure the tuner is in the DX mode.
•
If the area you are in is a primary signal area, the antenna may not be
grounded and connected properly.
–
Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
•
The antenna may not be the proper length.
–
Changing the Display
Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Text information, such as the channel name, artist name/feature and
song/program title, is available with each SiriusXM channel. The unit
can display this text information as explained below.
Broadcast is noisy.
•
The antenna is not the proper length.
Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
Make sure the antenna is grounded properly at its mounting
location.
–
•
1
In SiriusXM mode, press VIEW.
–
Each time you press this button, the display changes as shown
below.
Band/Channel Number Clock Channel Name*1 Artist
CD
Name*1 Song Title*1 Content info.*1 Category Name*1
Band/Channel Number
CD Player not functioning.
Out of operating temperature range +50°C (+120°F) for CD.
Allow the vehicle’s interior (or trunk) temperature to cool.
•
*1 If there is no text information, nothing will be displayed.
–
Note
CD playback sound is wavering.
Moisture condensation in the CD Module.
•
When the “TEXT SCR” (refer to “Scroll Setting (TEXT SCR)” on
“TEXT SCR” is set to “MANUAL,” the display scrolls only once after
any function is performed (PRESET, BAND, SEARCH, etc.).
•
–
Allow enough time for the condensation to evaporate (about
1 hour).
CD insertion not possible.
A CD is already in the CD player.
Eject the CD and remove it.
•
–
34-EN
•
The CD is being improperly inserted.
Make sure the CD is being inserted following instructions in the
CD Player Operation section.
–
•
•
Mechanism error.
Unable to fast forward or backward the CD.
The CD has been damaged.
•
1
Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
–
Eject the CD and discard it; using a damaged CD in your unit can
cause damage to the mechanism.
2
When the error indication remains after ejecting, press the
button again.
CD playback sound skips due to vibration.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
If the disc still cannot be ejected, consult your Alpine dealer.
•
•
•
•
Improper mounting of the unit.
Securely re-mount the unit.
The disc is very dirty.
Clean the disc.
The disc has scratches.
Change the disc.
The pick-up lens is dirty.
–
–
–
–
Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
•
•
A copy-protected WMA file was played back.
CD playback sound skips without vibration.
The disc is dirty or scratched.
Clean the disc; damaged disc should be replaced.
–
You can only play back non-copy-protected files.
•
–
Error displays (built-in CD player only).
Mechanical error
•
A sampling rate/bit rate not supported by the unit is used.
Use a sampling rate/bit rate that is supported by the unit.
–
Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the problem,
consult your nearest Alpine dealer.
–
Indication for Flash Memory/Portable
audio player
CD-R/CD-RW playback not possible.
Close session (finalization) has not been performed.
Perform finalization and attempt playback again.
•
–
MP3/WMA/AAC
•
•
Database error or decoder error.
MP3, WMA or AAC is not played back.
–
You can solve the problem by switching the source.
•
Writing error occurred. The MP3/WMA/AAC format is not
compatible.
–
Make sure the MP3/WMA/AAC has been written in a supported
rewrite in the format supported by this device.
Communication error or boot error, etc.
–
You can solve the problem by reconnecting the Flash Memory/
Portable audio player or changing source.
Audio
The sound is not output from the speakers.
Unit has no output signal of the internal amplifier.
•
–
•
•
Abnormal current is run to the USB connector device.
–
You can solve the problem by switching the source.
iPod
iPod does not play and no sound is output.
The iPod has not been recognized.
or
•
–
Reset this unit and the iPod. Refer to “Initial System Start-Up” on
No song (file) is stored in the Flash Memory/Portable audio player.
–
Connect the Flash Memory device/Portable audio player after
storing songs (files).
Indication for CD Player
•
•
A sampling rate/bit rate not supported by the unit is used.
Use a sampling rate/bit rate that is supported by the unit.
•
•
No CD is inserted.
–
–
Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the unit does
not start to play or eject the disc.
–
Remove the disc by following these steps:
Press the button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
A copy-protected WMA file was played back.
You can only play back non-copy-protected files.
–
35-EN
SiriusXM Advisory Messages
(CDE-124SXM/CDE-123 only)
NO SUPPORT
•
Text information that is not recognizable by the unit has been input.
The following messages may be displayed while operating the unit in
SiriusXM mode.
–
Use a Flash Memory device with input text information that is
supported by the unit.
Indication for iPod Mode
•
The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
Connect the Tuner or check the Tuner connection to the back of
the unit.
–
•
•
•
There are no songs in the iPod/iPhone.
–
Download songs to the iPod/iPhone and connect to this unit.
•
The SiriusXM Satellite Radio antenna or cable is either damaged or
not connected correctly to the SiriusXM Tuner.
Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked or
otherwise damaged. Replace the antenna if necessary.
Database error or decoder error.
You can solve the problem by switching the source.
–
–
Communication error or boot error, etc.
–
You can solve the problem by reconnecting the iPod/iPhone or
changing source.
•
•
The SiriusXM satellite signal is too weak at the current location.
–
Move the vehicle to a location with a clear view of the southern
sky.
Make sure the Satellite Radio antenna is properly mounted and not
obstructed by metal objects.
–
•
•
The iPod/iPhone is not verified.
You can solve the problem by reconnecting the iPod/iPhone.
–
The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
Abnormal current is run to the USB connector device.
You can solve the problem by switching the source.
Note
–
•
The unit will revert to the previous selected channel or to channel 1
automatically.
–
channel.
Indication for Pandora Radio Mode
NO STATION
•
•
You have not created any personalized Pandora Stations.
When you are not driving, use the Pandora Compatible
Application for iPhone to create your Pandora station(s).
•
The active channel is no longer in the SiriusXM channel lineup or the
user has entered an invalid channel number.
–
Note
•
The unit will revert to the previous channel or to channel 1
automatically.
SEE DEVICE
–
lineup.
The music cannot be played because the Pandora Compatible
Application for iPhone requires the user’s attention.
–
When you are not driving, please see the Pandora Compatible
Application for iPhone.
•
Your subscription has been updated.
Press any button to clear this message.
–
NO SERVICE
•
You switched CDE-124SXM/CDE-123/CDE-122 to Pandora mode
by pressing SOURCE with an iPhone or iPod touch connected,
without launching or installing the Pandora Application.
–
–
Launch the Pandora Application on the iPhone or iPod touch.
Select a source other than Pandora by pressing SOURCE.
36-EN
•
A locked channel is selected.
–
Input the passcode. On how to input passcode, refer to “How to
Note
•
If wrong passcode is input, “WRONG CODE” will be displayed and the
unit will revert to the previous selected channel.
•
•
Buffer for Instant Replay will full within 11 seconds.
Buffer for Instant Replay is full.
37-EN
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
161 mm (6~3/8")
Specifications
FM TUNER SECTION
Tuning Range
87.7~107.9 MHz
NOSEPIECE SIZE
Width
Height
Depth
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
9.3 dBf (0.8 μV/75 ohms)
13.5 dBf (1.3 μV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
170 mm (6~3/4")
46 mm (1~13/16")
25 mm (1")
Note
•
Due to continuous product improvement, specifications and design are
subject to change without notice.
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530-1,710 kHz
22.5 μV/27 dB
CD PLAYER SECTION
Frequency Response
5~20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
USB SECTION
USB requirements
USB 1.1/2.0
Max. Power Consumption
USB Class
500 mA
Mass Storage
File System
FAT 12/16/32
MPEG-1/2 AUDIO Layer-3
Windows Media Audio
AAC-LC format “.m4a” file
2-Channel (Stereo)
5~20,000 Hz ( 1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
MP3 Decoding
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response
Total Harmonic Distortion
Dynamic Range
™
*
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
*
Frequency response may differ depending on the encoder software/bit
rate.
PICKUP
Wave length
795 nm
Laser power
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11~16 V allowable)
*
Power Output
18 W RMS × 4
Maximum Pre-Output Voltage
CDE-123
CDE-124SXM/CDE-122
4 V/10 k ohms
2 V/10 k ohms
14 dB at 100 Hz
14 dB at 1 kHz
14 dB at 10 kHz
1.6 kg (3 lbs. 8 oz)
Bass
Mid
Treble
Weight
*
Primary amplifier ratings per CEA-2006 Standard
•
•
Power output: measured at 4 Ohms and ≤ 1% THD+N
S/N: 80 dBA (reference: 1 W into 4 Ohms)
38-EN
Installation and Connections
Before installing or connecting the unit, please read the following
CAUTION
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
WARNING
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or
product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
METAL EDGE.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
PRECAUTIONS
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
•
•
•
Be sure to disconnect the cable from the (−) battery post before
installing your CDE-124SXM/CDE-123/CDE-122. This will reduce
any chance of damage to the unit in case of a short-circuit.
Be sure to connect the color coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage
to the vehicle’s electrical system.
When making connections to the vehicle’s electrical system, be aware
of the factory installed components (e.g. on-board computer). Do not
tap into these leads to provide power for this unit. When connecting
the CDE-124SXM/CDE-123/CDE-122 to the fuse box, make sure the
fuse for the intended circuit of the CDE-124SXM/CDE-123/CDE-122
has the appropriate amperage. Failure to do so may result in damage
to the unit and/or the vehicle. When in doubt, consult your Alpine
dealer.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult
a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
•
•
The CDE-124SXM/CDE-123/CDE-122 uses female RCA-type jacks
for connection to other units (e.g. amplifier) having RCA connectors.
You may need an adaptor to connect other units. If so, please contact
your authorized Alpine dealer for assistance.
Be sure to connect the speaker (−) leads to the speaker (−) terminal.
Never connect left and right channel speaker cables to each other or
to the vehicle body.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
SERIAL NUMBER: [
]
]
]
]
INSTALLATION DATE: [
INSTALLATION TECHNICIAN: [
PLACE OF PURCHASE: [
39-EN
Screw
Hex Nut (M5)
Installation
2
*
Bolt Stud
Caution
When you install this unit in your car, do not remove the
detachable front panel.
Metal
Mounting
Strap
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
The main unit must be mounted within 35 degrees of the
horizontal plane, back to front.
1
*
This unit
Ground Lead
Chassis
Note
•
Detachable Front
Panel
For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
3
Slide the CDE-124SXM/CDE-123/CDE-122 into the
dashboard until it clicks. This ensures that the unit is
properly locked and will not accidentally come out from
the dashboard.
Less than 35°
Removal
1
Remove the mounting sleeve from the main unit (refer to
1
2
Remove the detachable front panel.
Insert the bracket keys into the unit, along the guides on
either side. The unit can now be removed from the
mounting sleeve.
Mounting Sleeve (Included)
Dashboard
This unit
Bracket keys
(Included)
Pressure Plates*
This unit
3
Pull the unit out, keeping it unlocked as you do so.
*
If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
JAPANESE CAR
2
Reinforce the head unit with the metal mounting strap
(not supplied). Secure the ground lead of the unit to a
clean metal spot using a screw ( ) already attached to the
*1
Front Frame
vehicle’s chassis.
Connect each input lead coming from an amplifier or equalizer
to the corresponding output lead coming from the left rear of
the CDE-124SXM/CDE-123/CDE-122. Connect all other leads of
the CDE-124SXM/CDE-123/CDE-122 according to details
described in the CONNECTlONS section.
Screws (M5 × 8)
(Included)
This unit
Ground Lead
3
*
Mounting Bracket
Note
Secure the ground lead of the unit to a clean metal spot using a screw
•
*3
(
) already attached to the vehicle’s chassis.
40-EN
Remove the iPod/iPhone
iPod/iPhone Connection (sold separately)
Remove the iPod/iPhone from Interface cable for iPod.
1
Connect USB cable to an iPod/iPhone with Interface cable
for iPod.
USB cable (CDE-124SXM/CDE-122,
sold separately; CDE-123, supplied)
Notes
•
This unit can charge the iPod/iPhone of the current source, and it may
stop charging when another source is switched.
•
After changing the unit to a source other than the USB iPod, remove the
iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data
may cause damage.
Interface cable for iPod (CDE-124SXM/CDE-122, sold separately;
CDE-123, supplied)
•
•
If sound is not output or the iPod/iPhone is not recognized even when
the iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod.
Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and you may not be able to play
it again.
2
Connect the USB cable to the USB connector of this unit.
When connect to Front USB Connection Terminal
1
2
Open the cover of the USB Connection Terminal.
Rear Flash Memory Connection (CDE-123
only) (sold separately)
Connect the Interface cable for iPod directly to the USB
Connection Terminal, or via the USB cable.
This unit
USB Connection Terminal
Connect Flash Memory
Connect the USB cable to the Rear USB connector of the unit, and then
secure the connection using the lock case supplied with USB cable as
shown below.
Flash Memory
(sold separately)
lock case
This unit
or
Cable (supplied)
USB Connector
Cable (sold
separately)
Interface cable for iPod
(CDE-124SXM/CDE-122, sold separately;
CDE-123, supplied)
Remove Flash Memory
Pull out Flash Memory squarely from the USB cable.
Flash Memory
(sold separately)
This unit
USB Connector
When connect to Rear USB Connector (CDE-123
only)
Connect the USB cable to the Rear USB connector of the unit, and then
secure the connection using the lock case supplied with USB cable as
shown below.
Cable (supplied)
Notes
•
•
When removing Flash Memory, pull it out straight.
If sound is not output or Flash Memory is not recognized even when
Flash Memory is connected, remove Flash Memory once, then connect
it again.
Interface cable for iPod (supplied)
lock case
This unit
•
•
Change to a source other than the Flash Memory mode, then remove
the Flash Memory. If the Flash Memory is removed in the Flash
Memory mode, data may be damaged.
Route the USB cable away from another cables.
Cable (supplied)
Rear USB Connector
41-EN
Connections
CDE-123 only
To BLUETOOTH INTERFACE
(sold separately)
To steering remote control
interface box
To Flash memory/Portable audio
player or iPod/iPhone
Antenna
(Blue)
POWER ANT
To power antenna
REMOTE TURN-ON
(Blue/White)
To amplifier
AUDIO INTERRUPT IN
ILLUMINATION
(Pink/Black)
(Orange)
To vehicle phone
To the instrument cluster
illumination lead
(Red)
IGNITION
BATTERY
Ignition Key
(Yellow)
(Black)
GND
Battery
(Gray)
Speakers
Front right
SPEAKER
RIGHT FRONT
(Gray/Black)
(Violet/Black)
SPEAKER
RIGHT REAR
Rear right
Rear left
(Violet)
(Green)
SPEAKER
LEFT REAR
(Green/Black)
(White/Black)
SPEAKER
LEFT FRONT
Front left
(White)
Speakers
Front Left
CDE-123 only
Amplifier
Front Right
Rear Left
Amplifier
Amplifier
Rear Right
CDE-123:
Subwoofers
CDE-124SXM/CDE-122:
Front or Subwoofers*1
*1 When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.
42-EN
BLUETOOTH interface Connector (CDE-123 only)
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Connect this to an optional BLUETOOTH INTERFACE. To use a
hands-free mobile phone, an optional BLUETOOTH INTERFACE
connection is required. For details on connection, refer to the
Owner’s Manual of the BLUETOOTH INTERFACE.
You can also connect this to an external device (such as a portable
player) by using Conversion cable (KCE-237B) for building up the AUX
IN (sold separately).
Note
•
AUX-R ON :
When the external device is connected.
AUX-R OFF :
When set to OFF, AUX REAR source cannot be selected.
SiriusXM Tuner connector (CDE-124SXM/CDE-123 only)
Connect to a SiriusXM Tuner.
Steering Remote Control Interface Connector (CDE-123
only)
To steering remote control interface box. For details, contact your
Alpine dealer.
Front Output RCA Connectors
RED is right and WHITE is left.
Rear Output RCA Connectors
RED is right and WHITE is left.
Rear USB Connector (CDE-123 only)
Connect this to an Flash Memory/Portable audio player or to an iPod/
iPhone. To use an iPod/iPhone, Interface cable for iPod connection is
required.
Subwoofer Output RCA Connectors (CDE-123 only)
RED is right and WHITE is left.
Front/Subwoofer Output RCA Connectors (CDE-124SXM/
CDE-122 only)
RED is right and WHITE is left.
Notes
•
Use the supplied USB cable. If a USB cable other than the supplied is
used, correct performance cannot be guaranteed.
Power Supply Connector
•
Route the USB cable away from other cables.
Antenna Receptacle
RCA Extension Cable (sold separately)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna, if
applicable.
BLUETOOTH INTERFACE Connection Cable (Included with
BLUETOOTH INTERFACE)
Front AUX Input Terminal
This terminal allows for input of audio from an external device (such
as a portable player), using a commercially-available converter cable.
Note
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
Front USB Terminal
Connect this to an Flash Memory/Portable audio player or to an iPod/
iPhone. To use an iPod/iPhone, Interface cable for iPod connection is
required.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your amplifier.
Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular phone
which provides ground shorting when a call is received.
To prevent external noise from entering the audio system.
•
•
•
•
Locate the unit and route the leads at least 10 cm away from the
car harness.
Keep the battery power leads as far away from other leads as
possible.
Connect the ground lead securely to a bare metal spot (remove
any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away
from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
Your Alpine dealer knows best about noise prevention
measures so consult your dealer for further information.
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument cluster
illumination lead. This will allow the backlighting of the
CDE-124SXM/CDE-123/CDE-122 to dim whenever the vehicle’s lights
are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or
another unused power source which provides (+)12V only when the
ignition is turned on or in the accessory position.
•
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s battery.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure
the connection is made to bare metal and is securely fastened using
the sheet metal screw provided.
43-EN
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and are pleased to offer
this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the
telephone numbers listed below.
You must supply proof of your purchase of the product.
PRODUCTS COVERED:
You must package the product securely to avoid damage during
shipment. To prevent lost packages it is recommended to use a
carrier that provides a tracking service.
This Warranty covers Car Audio Products and Related Accessories (“the
product”). Products purchased in the Canada are covered only in the
Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
HOW WE LIMIT IMPLIED WARRANTIES:
LENGTH OF WARRANTY:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND
MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF THE PRODUCT.
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who
must reside in the United States, Puerto Rico or Canada.
HOW WE EXCLUDE CERTAIN DAMAGES:
WHAT IS COVERED:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND
CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM
“INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING
THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE
ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT,
BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE
AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL
DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER
PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT
WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
This Warranty covers defects in materials or workmanship (parts and
labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
Damage occurring during shipment of the product to Alpine for
repair (claims must be presented to the carrier).
Damage caused by accident or abuse, including burned voice coils
caused by over-driving the speaker (amplifier level is turned up
and driven into distortion or clipping). Speaker mechanical failure
(e.g. punctures, tears or rips). Cracked or damaged LCD panels.
Dropped or damaged hard drives.
Damage caused by negligence, misuse, improper operation or
failure to follow instructions contained in the Owner’s manual.
Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of the
product.
Service performed by an unauthorized person, company or
association.
Any product which has the serial number defaced, altered or
removed.
Any product which has been adjusted, altered or modified without
Alpine’s consent.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state and province to province. In
addition, some states/provinces do not allow limitations on how long
an implied warranty lasts, and some do not allow the exclusion or
limitation of incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has
been installed in your vehicle by an Authorized Installation Center, and
this warranty stamped upon installation by the installation center.
Any product not distributed by Alpine within the United States,
Puerto Rico or Canada.
Any product not purchased from an Authorized Alpine Dealer.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number
for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
HOW TO OBTAIN WARRANTY SERVICE:
You are responsible for delivery of the product to an Authorized
Alpine Service Center or Alpine for repair and for payment of any
initial shipping charges. Alpine will, at its option, repair or replace
the product with a new or reconditioned product without charge.
If the repairs are covered by the warranty, and if the product was
shipped to an Authorized Alpine Service Center or Alpine, Alpine
will pay the return shipping charges.
NAVIGATION
You should provide a detailed description of the problem(s) for
which service is required.
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
|