Alpine CDA 7995 User Manual

FM/AM CD Receiver

C^FD^M/A^AM-^C7^{D P}9^la9^yer5/CDA-7894

FM/AM CD Receiver

CDA-7893/CDA-7892

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d'utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku,

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy, Charles De Gaulle

Cedex, France

Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen, Germany

Tel.: 02102-45 50

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

ALPINE ELECTRONICS OF U.K., LTD.

13 Tanners Drive, Blakelands, Milton Keynes

MK14 5BU, U.K.

ALPINE ITALIA S.p.A.

Via C. Colombo 8, 20090 Trezzano Sul Naviglio

MI, Italy

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Tel.: 01908-61 15 56

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 02-48 47 81

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal De Gamarra 36, Pabellón 32

01013 Vitoria (Alava)-Apdo. 133, Spain

Tel.: 34-45-283588

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Printed in China (Y)

68P01434K99-O

Melyi Printing Factory, Dalian, China

No. 28 Chang Qing Street, Xl Gang District, Dalian, China

ENGLISH

Contents

Operating Instructions

SETUP Operation

Switching the Tuner Mode.............................. 14

Changing Lighting Color (CDA-7894 only)... 14

Dimmer Control (CDA-7995/CDA-7894/

WARNING

WARNING..................................................3

CAUTION ...................................................3

PRECAUTIONS .........................................3

CDA-7893 only) .......................................... 14

Subwoofer On and Off .................................... 14

Sound (Beep) Guide Function ........................ 15

Turning Mute Mode On/Off............................ 15

Scroll Setting................................................... 15

Setting the AUX Mode (V-Link)..................... 15

Connecting to an External Amplifier

Basic Operation

Detaching the Front Panel................................. 5

Attaching the Front Panel ................................. 5

Initial System Start-Up ..................................... 5

Turning Power On and Off ............................... 5

Display Angle Adjustment ................................ 5

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear)/

(CDA-7894/CDA-7893/CDA-7892 Only) .. 16

Setting the Defeat of the External Input ......... 16

Demonstration................................................. 17

Adjusting Display Contrast

(CDA-7995 only)......................................... 17

Defeat ............................................................ 6

Audio Mute Function ........................................ 6

Displaying Time................................................ 6

Setting Time ...................................................... 6

Setting the Bass Control ................................... 7

Setting the Treble Control ................................. 7

Adjusting the built-in Crossover ....................... 7

About the Time Correction ............................... 8

Bass Focus ........................................................ 9

Time Correction .............................................. 10

Setting the MX Mode ..................................... 10

Quick Searching Function .............................. 11

Blackout Mode On and Off (CDA-7995/

Radio Operation

Manual Tuning ................................................ 18

Automatic Seek Tuning .................................. 18

Manual Storing of Station Presets .................. 18

Automatic Memory of Station Presets ............ 19

Tuning to Preset Stations ................................ 19

CD Player Operation

Opening and Closing the Movable display ..... 20

Playback .......................................................... 20

Music Sensor (Skip)........................................ 21

Fast Forward and Backward ........................... 21

Repeat Play ..................................................... 21

M.I.X. (Random Play) .................................... 22

Scanning Programs ......................................... 22

Controlling CD Changer (Optional) ............... 22

Multi-Changer Selection ................................. 23

CDA-7894 only) .......................................... 11

Changing the Audio Level Display Pattern..... 11

Displaying the Title/Text................................. 12

Titling Discs/Stations ...................................... 13

Erasing Disc Title/Station Title ....................... 13

1-EN

MP3 Operation

Installation and Connections

Playing MP3 Files (CDA-7995/

Warning ........................................................... 36

Caution ............................................................ 36

Precautions ...................................................... 36

Installation ...................................................... 37

Connections .................................................... 38

CDA-7894 only) .......................................... 24

Playing MP3 Files with the CD Changer

(Optional) .................................................... 24

Music Sensor (Skip)........................................ 24

Fast Forward and Backward ........................... 25

Selecting Folders............................................. 25

File Search ...................................................... 25

Repeat Play ..................................................... 25

M.I.X. (Random Play) .................................... 25

Scanning Programs ......................................... 25

Setting the Range of MP3 File Selection ........ 26

Playing MP3 Data ........................................... 26

About MP3...................................................... 26

LIMITED WARRANTY

XM Radio Operation

Receiving XM Channels with the XM Receiver

(Optional) .................................................... 28

Checking the XM Radio ID Number .............. 28

Storing XM Channel Presets........................... 29

Receiving Stored XM Channels...................... 29

Category Search .............................................. 29

Changing the Display...................................... 29

Remote Control Operation

Controls on Remote Control ........................... 30

Battery Replacement ....................................... 31

Information

In Case of Difficulty ....................................... 32

Specifications .................................................. 35

2-EN

WARNING

CAUTION

This symbol means important instructions. Failure

to heed them can result in serious injury or death.

This symbol means important instructions. Failure

to heed them can result in injury or material

property damage.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR

ATTENTION AWAY FROM SAFELY DRIVING YOUR

VEHICLE.

Any function that requires your prolonged attention should only

be performed after coming to a complete stop. Always stop the

vehicle in a safe location before performing these functions.

Failure to do so may result in an accident.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to the

product. Return it to your authorized Alpine dealer or the nearest

Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.

INSERT WITH THE CORRECT BATTERY POLARITY.

When inserting the batteries, be sure to observe proper polarity (+

and –) as instructed. Rupture or chemical leakage from the

battery may cause fire or personal injury.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL

HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking ahead of

the vehicle and cause an accident.

PANEL OR MOVING MONITOR IS IN MOTION.

Failure to do so may result in personal injury or damage to the

product.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

PRECAUTIONS

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in fire, etc.

Temperature

Be sure the temperature inside the vehicle is between +60°C

(+140°F) and –10°C (+14°F) before turning your unit on.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE

REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed,

Moisture Condensation

You may notice the CD playback sound wavering due to

condensation. If this happens, remove the disc from the player

and wait about an hour for the moisture to evaporate.

consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACING

FUSES.

Damaged Disc

Failure to do so may result in fire or electric shock.

Do not attempt to play cracked, warped, or damaged discs.

Playing a bad disc could severely damage the playback

mechanism.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

Maintenance

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire,

electric shock or other injury.

If you have problems, do not attempt to repair the unit yourself.

Return it to your Alpine dealer or the nearest Alpine Service

Station for servicing.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS

IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the product.

3-EN

WARNING

PRECAUTIONS

Correct Handling

Do not drop the disc while handling. Hold the disc so you will

not leave fingerprints on the surface. Do not affix tape, paper, or

gummed labels to the disc. Do not write on the disc.

Never Attempt the Following

Do not grip or pull out the disc while it is being pulled back into

the player by the automatic reloading mechanism.

Do not attempt to insert a disc into the unit when the unit power

is off.

CORRECT

INCORRECT

Inserting Discs

Disc Cleaning

Your player accepts only one disc at a time for playback. Do not

attempt to load more than one disc.

Fingerprints, dust, or soil on the surface of the disc could cause

the CD player to skip. For routine cleaning, wipe the playing

surface with a clean, soft cloth from the centre of the disc to the

outer edge. If the surface is heavily soiled, dampen a clean, soft

cloth in a solution of mild neutral detergent before cleaning the

disc.

Make sure the label side is facing up when you insert the disc.

Your player will automatically eject any disc that is inserted

incorrectly. If the player continues to eject a correctly inserted

disc, push the RESET switch with a pointed object such as a

ballpoint pen.

Playing a disc while driving on a very bumpy road may result in

skips, but this will not scratch the disc or damage the player.

New Discs

As a protective measure to prevent the CD from jamming, the CD

player will automatically eject discs with irregular surfaces or

inserted incorrectly. When a new disc is inserted into the player

and ejected after initial loading, using your finger, feel around the

inside of the centre hole and outside edge of the disc. If you feel

any small bumps or irregularities, this could inhibit proper

loading of the disc. To remove the bumps, rub the inside edge of

the hole and outside edge of the disc with a ballpoint pen or other

such instrument, then insert the disc again.

Disc Accessories

There are various accessories available on the market for

protecting the disc surface and improving sound quality.

However, most of them will influence the thickness and/or

diameter of the disc. Using such accessories can cause the disc to

be out of standard specifications and may create operational

problems. We recommend not using these accessories on discs

played in Alpine CD players.

Center Hole

New

Disc

Bumps

Outside

(Bumps)

Transparent Sheet

Disc Stabilizer

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use

any special shape discs.

Use of special shape discs may cause damage to the mechanism.

Installation Location

Make sure the CDA-7995/CDA-7894/CDA-7893/CDA-7892 will

not be installed in a location subjected to:

•

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

4-EN

Basic Operation

Initial System Start-Up

Be sure to press the RESET switch when using the unit

for the first time, after installing the CD changer, etc., or

after changing the car battery.

POWER

RESET

Make sure that the power of the unit is off. If the power

is on, press and hold the POWER button for at least 3

seconds to turn off the unit.

Press the RESET switch with a ballpoint pen, or any

other pointed object.

ANGLE 89

Detaching the Front Panel

Turning Power On and Off

Press and hold the POWER button for more than 3

seconds to turn off the power.

Press the POWER button to turn on the unit.

Press the

(Release) button at upper left side until

NOTE

the front panel pops out.

The unit can be turned on by pressing any other button except

the eject c and CLK/TITLE button.

Grasp the left side of the front panel and pull it out.

The volume level gradually increases to the previous

level you were listening to before the unit was turned

off. Press and hold the POWER button for at least 3

seconds to turn off the unit.

NOTES

NOTE

•

The front panel may become hot in normal usage (especially

the connector terminals on the back of the front panel.) This is

not a malfunction.

The first time power is turned on, the volume will start from level

12.

•

To protect the front panel, place it in the supplied carrying

case.

Display Angle Adjustment

Movable display

Attaching the Front Panel

The movable display may be adjusted to 3 different

angles depending upon user preference.

First, insert the right side of the front panel into the

main unit. Align the groove on the front panel with the

projections on the main unit.

Press the ANGLE 89 button to adjust the angle of the

movable display.

Push the left side of the front panel until it locks firmly

into the main unit.

NOTES

•

The display will close a half minute after the ignition key is

turned to the OFF position.

•

The adjusted angle of the display is stored in memory. There

is no need to re-adjust the angle when the power is turned

back on.

CAUTION

Keep hands (or any other object) away from the display while it

is opening or closing to avoid damage or injury. The back of the

movable display will get very warm under normal operating

conditions. This is not a malfunction. Do not touch.

NOTES

•

Before attaching the front panel, make sure that there is no

dirt or dust on the connector terminals and no foreign object

between the front panel and the main unit.

•

Attaching the front panel carefully, holding the sides of the

front panel to avoid pushing buttons by mistake.

5-EN

Basic Operation

Displaying Time

Press the CLK (clock) button repeatedly until the time

is displayed.

g DN

BAND

MODE (Rotary encoder)

Each press changes the modes as follows:

Radio mode

Clock priority

mode

→

Radio frequency

→

TITLE mode

CD Player/Changer modes

f UP X-OVER CENTER f CLK

MUTE

DISC TEXT

mode

Playing time

mode

Clock priority

mode

→

←

TRACK

TEXT mode

TITLE mode

←

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

NOTES

•

Selecting any tuner or CD function while in the clock priority

mode will interrupt the time display momentarily. The

function selected will be displayed for about 5 seconds before

the time returns to the display.

Press the MODE (Rotary encoder) button repeatedly

to choose the desired mode.

•

When the power is off but the ignition key is on, press the CLK

button to display the time.

•∗ For CDA-7893/CDA-7892 models, the display above is shown

Each press changes the modes as follows:

→ BALANCE → FADER → DEFEAT

SUBWOOFER*← VOLUME ←

with a CD-TEXT compatible changer connected.

Setting Time

Volume : 0 ~ 35

Balance : L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

In the Clock priority mode, press and hold the CLK

(clock) button for at least 3 seconds while the time is

displayed. The time indication will blink.

NOTES

•

If the MODE button is not pressed within 5 seconds after

selecting the BALANCE, FADER, DEFEAT or SUBWOOFER

mode, the unit automatically returns to the VOLUME mode.

*When the subwoofer mode is OFF, its level cannot be

adjusted.

Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

•

When the hour has been adjusted, press the Rotary

encoder.

Turn the Rotary encoder until the desired sound is

obtained in each mode.

By setting Defeat ON, previously adjusted settings of

BASS, TREBLE will return to the factory defaults, but

MX will be turned off.

Turn the Rotary encoder to adjust the minutes while

the time indication is blinking. The time is automatically

set 5 seconds after the minute adjustment. The time

can also be manually set by pressing the Rotary

encoder.

NOTE

Depending on the connected devices, some functions and display

indications do not work.

Audio Mute Function

Activating this function will instantly lower the volume

level by 20 dB.

Press the MUTE button to activate the MUTE mode.

The audio level will decrease by about

20 dB.

Pressing the MUTE button again will bring the audio

back to its previous level.

6-EN

Setting the Bass Control

2-2

Setting the treble Level:

Turn the Rotary encoder to select the desired Treble

Level (–7~+7).

You can change the Bass Frequency emphasis to

create your own tonal preference.

You can emphasize the treble frequency.

NOTES

•

If no buttons are pressed within 5 seconds, the Treble control

setting will be turned off automatically.

Press the CENTER f button to select the BASS (bass

Center frequency) control mode.

•

The settings of the Treble Level will be individually

memorized for each source (FM, AM, XM, CD, etc.) until the

setting is changed. Once you set Treble frequency for one of

sources (FM, AM, XM, CD, etc.), this setting becomes

effective for all those sources. Depending on the connected

devices, some functions and display indications do not work.

This function is inoperable when DEFEAT is ON.

→ BASS → TREBLE → normal mode

2-1

Setting the bass Center frequency:

Press the g DN or f UP button to select the

desired bass center frequency.

•

→ 60Hz

↔

70Hz

↔

80Hz

↔

90Hz

←

Adjusting the built-in Crossover

→ 180Hz ↔ 150Hz ↔ 130Hz ↔ 100Hz

Emphasizes the displayed Bass frequency ranges.

The High and Low Pass Filters on this unit can be

adjusted to suit your personal taste.

2-2

Setting the bass Band Width (Q-Factor):

Press the BAND button to select the desired bass

Press and hold the X-OVER button for at least 2

seconds.

Band Width.

→ B. Width1 → B. Width2 → B. Width3 → B. Width4

Repeat this procedure to select the desired parameter.

(Wide) ..................................... (Narrow)

←

→

→ HPF → LPF∗ → normal mode

Changes the bass boost band width to wide or narrow.

A wide setting will boost a wide range of frequencies

above and below the center frequency. A narrower

setting will boost only frequencies near the center

frequency.

∗ When the subwoofer output of this unit is turned

OFF, LPF and phase are deactivated.

Press the g DN or f UP button to select the

desired setting.

2-3

Setting the bass Level:

Turn the Rotary encoder to select the desired bass

Level (–7~+7).

1. HPF (Setting the High Pass Filter):

FLAT (OFF) ↔ 80Hz ↔ 120Hz ↔160Hz

Outputs all frequencies higher than that selected

according to your preference.

You can emphasize or weaken the bass frequency.

NOTES

• If no buttons are pressed within 5 seconds, the Bass control

setting will be turned off automatically.

2. LPF(Setting the Low Pass Filter):

FLAT (OFF) ↔ 80Hz ↔ 120Hz ↔160Hz

• The settings of the Bass Level will be individually memorized

for each source (FM, AM, XM, CD, etc.) until the setting is

changed. Once you set Bass frequency and Bass Band Width for

one of sources (FM, AM, XM, CD, etc.), this setting becomes

effective for all those sources. Depending on the connected

devices, some functions and display indications do not work.

• This function is inoperable when DEFEAT is ON.

Outputs all frequencies lower than that selected

according to your preference.

(Only available when using the subwoofer output from

this unit.)

NOTES

•

If no buttons are pressed within 5 seconds, the setup menu

returns to the normal audio display.

These functions are inoperative when an external, Ai-NET

processor is connected.

If HPF, LPF, Bass Control and Treble Control are all set to

ON, depending on the Bass Control and Treble Control

settings, you may not be able to reinforce the sound effect.

Except when the HPF and LPF is turned OFF, the subwoofer

is in monaural mode.

Setting the Treble Control

You can change the Treble Frequency emphasis to

create your own tonal preference.

•

Press the CENTER f button to select the TREBLE

(treble Center frequency) control mode.

When the subwoofer is set to OFF, LPF mode and change of

phase does not work.

→ BASS → TREBLE → normal mode

2-1Setting the treble Center frequency:

Press g DN or f UP button to select the desired

treble Center frequency.

→ 10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz

←

Emphasizes the displayed Treble frequency ranges.

7-EN

Basic Operation

Here we calculate the time correction value for the front left

speaker in the diagram at the left.

BAND

Rotary encoder

Conditions:

Farthest Speaker – listening position: 2.25 m (88-9/16")

Front left speaker – listening position : 0.5 m (19-11/16")

Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")

Time correction = 1.75 ÷ 343* × 1000 = 5.1 (ms)

*Speed of sound: 343 m/s (765 mph) at 20˚C

In other words, giving the front left speaker a time

correction value of 5.1 ms makes it seem as if the distance

to the front left speaker is the same as the distance to the

farthest speaker.

T. CORR

The sound is not balanced because the distance between

the listening position and the various speakers is different.

The difference in distance between the front left speaker

and the rear right speaker is 1.75 m (68-7/8").

About the Time Correction

The distance between the listener and the speakers in a

car vary widely due to the special conditions of the mobile

environment. This difference in the distances from the

speakers to the listener creates a shift in the sounds image

and frequency characteristics. This is caused by the time

delay between the sound reaching the listener’s right

versus the left ear.

Time correction eliminates the differences in the time

required for the sound to reach the listening position.

The time of the front left speaker is corrected by 5.1 ms so

that its sound reaches the listening position at the same

time as the sound of other speakers.

To correct this, the CDA-7995/CDA-7894/CDA-7893/CDA-

7892 is able to delay the audio signal to the speakers

closest to the listener. This effectively creates a perception

of increased distance for those speakers. The listener can

be placed at an equal distance between the left and right

speakers for optimum staging.

Example 2. Listening Position: All Seats

Adjust the time correction level of each speaker to almost

the same level.

Sit in the listening position (driver’s seat, etc.) and

measure the distance (in meters) between your head

and the various speakers.

The adjustment will be made for each speaker in a step of

0.1 ms.

Calculate the difference between the distance to the

farthest speaker and the other speakers.

L = (distance to farthest speaker) – (distance to other

speakers)

Example 1. Listening Position: Front Left Seat

Adjust the time correction level of the front left speaker to a

high value and the rear right to zero or a low value.

Divide the distances calculated for the speakers by the

speed of sound (343 m/s (765 mph) at 20˚C).

These values are the time correction values for the

different speakers.

5.1ms

0.5m

2.25m

∗

Tips

* Subwoofer speaker.

You cannot change the Time Correction value for the

subwoofer, but you can set the subwoofer's apparent position

to the front by adjusting the Time Correction value of the front

and rear speakers.

For details, refer to the "Tips" on page 9.

8-EN

Example of Steps 2 and 3 Setting

Bass Focus

(1) After entering corrections for the front (left and right)

speakers in STEP 5, the time difference is 1.5 ms for

both front-left and front-right speakers.

The time difference between the front-rear/left-right

speakers, can be adjusted at the same time. With an

initial delay of 0.3 ms for each of the 0 to 39 steps,

audible time correction can be done. For finer

adjustment, use the procedure in the previous section

"Time Correction," for which the delay steps are 0.1 ms.

1.5ms

Press the T.CORR button to select the Bass Focus

mode.

→ Bass Focus mode → Time correction mode

∗

Normal mode ←

Press the BAND button to select the front-rear / left-

right speakers.

(2) After entering corrections for the left (front and rear)

speakers in STEP 5, the time difference becomes 3.0

ms* for the front left speaker and 1.5 ms for the left

rear speaker.

* Because the time difference was already set to 1.5 ms

for the front left speaker in STEP 1, the additional

correction in STEP 5 makes the time difference of the

front left speaker 3.0 ms.

→

Front (left-right)

speakers

Left (front-rear)

speakers

3.0ms

←

1.5ms

Rear (left-right)

speakers

Right (front-rear)

speakers

∗

Turn the Rotary encoder to adjust the front-rear / left-

right delay.

Tips

* Subwoofer speaker.

For setting another channel (speaker), repeat the steps

2 and 3.

Delay (turn the rotary encoder) the audio signal to the front

(left and right) speakers to make the apparent position of the

subwoofer to be at the front. In doing this, the apparent

position between the front (left and right) speakers and

subwoofer will appear equal to the driver. After performing

above, you can change the positions of left and right speakers

by delaying the time .

After setting, press the T.CORR to return to the normal

mode.

NOTES

•

Any manual time correction adjustments will also affect

corrections made in Bass Focus. However, since the interval

of the manual mode is 0.1ms and that of Bass Focus is 1 step

(0.3ms), some difference may occur.

•

Time Correction mode is automatically canceled if no buttons

are pressed within 15 seconds.

Continued

9-EN

Basic Operation

Setting the MX Mode

MX (Media Xpander) makes vocals or instruments

sound distinct regardless of the music source. The radio,

CD, and MP3, will be able to reproduce the music

clearly even in cars with a lot of road noise.

Rotary encoder/Q. S.

SOURCE BAND DISP/B. OUT

Press the MX button to select MX ON.

Press the SOURCE button to select the source you

want to MX (Media Xpander)-correct.

T.CORR

Press and hold the MX button for at least 2 seconds to

select the MX mode.

Time Difference Table

Turn the Rotary encoder to select your preferred

mode or OFF (NON EFECT).

Time

Difference

(ms)

Time

Difference

(ms)

Number of

Steps

Number of

Steps

Number of

Steps

Difference

(ms)

FM (MX level 1 to 3):

The medium to high frequencies become more clear,

and produces well balanced sound in all the bands.

CD (MX level 1 to 3):

CD mode processes a large quantity of data. This data

is used to reproduce the sound cleanly by making use

of the data quantity.

0.0

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

3.0

3.3

3.6

3.9

4.2

4.5

4.8

5.1

5.4

5.7

6.0

6.3

6.6

6.9

7.2

7.5

7.8

8.1

8.4

8.7

9.0

9.3

9.6

9.9

MP3/XM (MX level 1 to 3):

10.2

10.5

10.8

11.1

11.4

11.6

This corrects information that was omitted at the time

of compression. This reproduces a well-balanced

sound close to the original.

DVD (Video CD) (MX level 1 to 2):

The dialog portion of the video is reproduced more

clearly.

DVD (CD) (MX level 1):

This disk contains a large quantity of data such as

music clip. MX uses this data to reproduce the sound

accurately.

Time Correction

AUX (MX level 1):

Choose the MX mode (MP3, MUSIC, or MOVIE) that

corresponds to the media connected.

Before performing the following procedures, refer to

"About the Time Correction" (page 8).

Make time corrections by pressing the T.CORR button.

After setting, press the Rotary encoder to return to the

normal mode.

Each press changes the modes as follows:

NOTES

→ Bass Focus mode → Time correction mode

•

By “Setting the Defeat of the external input” (page 16) to ON,

operation is bypassed.

To cancel MX mode for all music sources, press the MX

button to turn MX off.

MX mode is automatically canceled if no buttons are pressed

within 15 seconds.

Each music source, such as radio, CD, and MP3 can have its

own MX setting.

On disks with both MP3 and CD-DA, when the source

changes from “MP3 to CD-DA” or “CD-DA to MP3”, the

MX-mode switching process may take a little time before a

piece is played due to.

Normal mode ←

Select a speaker to be adjusted by pressing the BAND

button.

→ F – L → F – R → R – L → R – R

Adjust the desired time correction value by turning the

Rotary encoder.

•

Setting to MX OFF makes MX mode of each music source

OFF.

This function is inoperable when DEFEAT is ON.

For setting another speaker, repeat the step 2 and 3.

After setting, press the Rotary encoder to return to the

normal mode.

NOTE

Time Correction mode is automatically canceled if no buttons

are pressed within 15 seconds.

10-EN

Quick Searching Function

Changing the Audio Level Display

Pattern

You can easily select tracks and files.

You can select the Audio Level Display from three

display patterns (For the CDA-7892 model, only pattern

1 is displayed).You can also deactivate the display.

Press the SOURCE button to set the desired source

mode.

( CD mode is explained here as an example)

When setting the CD mode, press and hold the Q.S.

button for at least 2 seconds. The mode changes to the

Q.S. (Quick Search) setting.

Press DISP button to switch the display pattern.

CDA-7995/CDA-7894/CDA-7893:

→ Pattern1 → Pattern2 → Pattern3 → OFF

Select a desired track by turning the Rotary encoder

to the right or left.

CDA-7892:

Pattern display

↔

OFF

• CD/Changer mode: Track can be selected.

• XM mode: Channel can be selected. (It is not

possible to select in the tuner mode)

• MP3 mode: File number can be selected.

When the setting is completed, the Q.S. mode is

canceled by pressing the Rotary encoder.

NOTES

The Q.S. mode is automatically canceled after 10 seconds if no

buttons are pressed during step 2 and 3.

Blackout Mode On and Off

(CDA-7995/CDA-7894 only)

When the Blackout mode is turned on, the display will

turn off to reduce power consumption.

This additional power enhances the sound quality.

Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so the

display will turn off.

NOTE

If any button on the unit is pressed during the blackout mode, the

function will be displayed for 5 seconds to show the operation

before returning to Blackout mode.

To cancel the blackout mode, press and hold the

B.OUT button for at least 3 seconds.

11-EN

Basic Operation

MP3 mode: (MP3 files can be played back with the

CDA-7893/CDA-7892 models if an MP3 compatible

changer is connected.)

-/J BAND

Rotary encoder

↓

ELAPSED TIME DISPLAY

↓

CLOCK DISPLAY

↓

FOLDER NAME DISPLAY

↓

FILE NAME DISPLAY

↓

ID3 TAG DISPLAY^∗2

↓

g DN f UP

TITLE

FRAME DISPLAY^∗3

∗1

Displayed during playback of a disc with CD Text.

“ NO TEXT” will be displayed when the CD contains

no Text data.

Displaying the Title/Text

Text cannot be displayed for the CDA-7893/CDA-

7892 models.

If an MP3 file contains ID3 tag information, all the

ID3 tag information is displayed (e.g., track name,

artist name, and album name). All other tag data is

ignored.

“NO TAG” will be displayed when an MP3 file

contains no ID3 tag information.

The recording sampling rate and bit rate of the MP3

file are displayed.

It is possible to display the CD/Station title if the title has

been previously inputted. For details, see

“Titling Disc/

∗2

Stations (page 13). Text information, such as the disc

”

name and the track name, will be displayed if playing a

CD text compatible disc. It is also possible to display the

folder name, the file name, and the ID3 tag, etc. while

playing MP3 files.

∗3

Press the TITLE button.

The mode will change every time the button is

pressed.

NOTES

•

Some characters may not be displayed correctly with this

device, depending on the character type.

The CD changer must also be CD Text compatible for the Text

information to be displayed.

When the Scroll Setting (refer to page 15) is set to “SCROLL

MANUAL”, press and hold the TITLE button for at least 3

seconds to scroll the Text information only once (TEXT

DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY

or ID3 TAG DISPLAY mode).

“NO SUPPORT” (CDA-7892: "NO SUPRT") is displayed

when the desired text information cannot be displayed on this

unit.

About “Title” and “Text”

Title: With this device, it is possible to input the CD/

Station name (refer to page 13). This inputted name

is referred to as a “title.”

You cannot input or display titles on MP3 discs.

Text: Text compatible CDs contain text information such

as the disc name and track name. Such text

information is referred to as “text.”

•

Radio mode:

If the title was not previously input, “NO TITLE” is

displayed.

↓

FREQUENCY DISPLAY

↓

CLOCK DISPLAY

↓

TITLE DISPLAY

CD mode: (Text is displayed for the CDA-7893/CDA-

7892 models when a compatible changer with CD text

is connected.)

↓

ELAPSED TIME DISPLAY

↓

CLOCK DISPLAY

↓

TEXT DISPLAY (DISC NAME)^∗1

↓

TEXT DISPLAY (TRACK NAME)^∗1

↓

TITLE DISPLAY

12-EN

Titling Discs/Stations

Erasing Disc Title/Station Title

Press the TITLE button to select the titling mode. Then,

press and hold for at least 3 seconds.

It is possible to title your favorite CD's or radio stations.

You cannot input titles on MP3 discs (Except when a

changer is connected).

Press and hold the -/J button for at least 2 seconds

to activate the title scanning mode. The title in the

display will blink.

Press the TITLE button and select the title display

mode.

For details, see “Displaying the Title/Text” (page 12).

Press the g DN or f UP button repeatedly until

the title you want to erase is displayed.

Press and hold the TITLE button for at least 3 seconds.

The first character will blink.

Press and hold the -/J button for at least 2 seconds

to erase the title displayed.

CDA-7995 only:

Press the BAND button to select the characters/

symbols.

Press the TITLE button to cancel the title erasing

mode.

→ Upper case → Lower case → Numeral/Symbol

NOTE

You cannot erase CD-TEXT.

Turn the Rotary encoder to select the desired letter/

numeral/symbol available for naming.

Press the Rotary encoder to store the first character.

The first character will stop blinking and the display will

automatically advance to the next character. When that

character begins to blink, you may choose the next

letter or symbol of your title.

Repeat the steps 3 and 4 above to complete the titling.

Pressing the Rotary encoder after entering the 8th

character, automatically stores the title into memory.

When entering a title of less than 8 characters (for

example, 3 character title):

After entering 3 characters to complete your title, the

4th character space will be blinking. Go to step 6 to

complete the title.

Press the TITLE button to record the title.

NOTES

•

You can enter 24 radio station titles and 18 CD titles on this

unit. If you try to store beyond the limit, the display will show

“FULL DATA.” At this point, no more titles can be stored.

The CD Changer title length or memory capacity varies

depending upon the model being used.

To input a new title, one of the previously inputted titles must

first be deleted.

When you want to erase a title, enter the “ ”, “ ” (CDA-

7995 only) symbol into all spaces.

•

The operations described in steps 3 to 5 must be made within

10 seconds. The input mode will be cancelled if no action is

taken for over 10 seconds.

•

Removing power from the unit may delete these titles. Use

caution when manipulating the power cord.

13-EN

SETUP Operation

Dimmer Control

(CDA-7995/CDA-7894/CDA-7893 only)

SOURCE BAND

MODE/Rotary encoder

Set the DIMMER control to AUTO to decrease the

illumination brightness of the unit with the head lights of

the vehicle ON. This mode is useful if you feel the unit's

backlighting is too bright at night.

Press and hold the SETUP button for at least 3

seconds.

g DN f UP

SETUP

Press the f UP or g DN button to select

“DIM”(DIMMER).

Switching the Tuner Mode

Press the BAND button to select the Dimmer mode.

Each press toggles between DIM AUTO and DIM

MANUAL.

The CDA-7995/CDA-7894/CDA-7893/CDA-7892

incorporates the MAX TUNE SQ for the highest quality

tuner audio. Moreover, you can choose between two

settings to suit your own personal sound preferences

and usage.

Press the SETUP button to activate the normal mode.

Subwoofer On and Off

Press and hold the SETUP button for at least 3

seconds.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select

"NORMAL or HI-FI."

Press the f UP or g DN button to select “SUB

(Subwoofer).”

Press the BAND button to switch the TUNER mode.

Press the BAND button to toggle mode between

SUB W ON and SUB-W OFF (CDA-7892: SUB W

OFF).

HI-FI ←→ NORMAL

NORMAL: Standard setting

HI-FI: Sound quality priority setting

NOTE

The initial setting at the factory is subwoofer ON.

NOTES

•

The initial setting at the factory is "NORMAL."

If you find the sound is very noisy while listening to the tuner

in the HI-FI mode, we recommend you change to the

NORMAL mode.

Press the SETUP button after setting the SUB-W ON.

Press the MODE button repeatedly to select the

SUB-W mode.

When the setting is completed, press the SETUP

button to return to the normal mode.

→ SUB-W

→ BALANCE

VOLUME ← DEFEAT ← FADER ←

NOTE

"MP3 File Selection" and "Playing MP3 data" in the "SETUP"

mode section are described in MP3 Operation on page 26.

Press the g DN or f UP button after selecting the

SUB-W mode, and the subwoofer output phase is

toggled SUBW NOR (0°) or SUBW REV (180°).

Changing Lighting Color

(CDA-7894 only)

Turn Rotary encoder until the desired sound is

obtained in each mode.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select

“AMBER”.

Press the BAND button to toggle the mode between

AMBER ON (amber) and AMBER OFF (green).

Press the SETUP button to set the selected mode.

14-EN

Press the BAND button to toggle the mode between

SCR AUTO and MANUAL (For CDA-7892 model:

MANU is displayed).

Sound (Beep) Guide Function

This function will give audible feedback with varying

tones depending upon the button pressed.

• SCR AUTO: the CD text information, the text

information of folder and file names, and the ID3

tags are scrolled automatically.

• SCR MANUAL: the display is scrolled only when a disc

is loaded or when a track is changed, etc.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select “BEEP.”

When the setting is completed, press the SETUP

button to return to the normal mode.

Press the BAND button to toggle the mode between

BEEP ON and BEEP OFF.

NOTES

NOTE

•

Initial mode is “SCR MANUAL.”

The initial setting at the factory is BEEP ON.

The unit scrolls CD text names, folder names, file names or

ID3 tag display. The disc titles input manually (refer to page

13) cannot be scrolled.

Press the SETUP button to set the selected mode.

Turning Mute Mode On/Off

Setting the AUX Mode (V-Link)

If a device having the interrupt feature is connected,

audio will be automatically muted whenever the interrupt

signal is received from the device. This function can be

turned ON or OFF from the head unit by following

procedure below.

You can input TV/video sound by connecting an optional

Ai-NET/RCA Interface cable (KCA-121B) or Versatile

Link Terminal (KCA-410C) to this component.

Press and hold the SETUP button for at least 3

seconds.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select “AUX.”

Press the f UP or g DN button to select the

MUTE mode.

Press the BAND button to toggle the mode between

AUX ON and AUX OFF.

Press the BAND button to turn on or off the MUTE

mode.

Each press toggles between the MUTE ON and OFF

modes.

NOTES

•

The initial setting at the factory is AUX OFF.

You can set the AUX mode display by pressing the

g DN or f UP button after AUX ON is set, select the

AUX mode display setting, and then press the BAND button.

When connecting the KCA-410C, you can set two AUX mode

displays.

NOTE

The initial setting at the factory is “MUTE ON.”

•

Press the SETUP button again to return to normal

operation.

Press the SETUP button to return to normal mode.

Scroll Setting

To adjust the volume, etc., first press the SOURCE

button and select the AUX mode, then make the

necessary adjustment.

This CD player can scroll the disc and track names

recorded on CD-TEXT discs, as well as the text

information of MP3 files, folder names, and ID3 tags.

(This function can be used for CDA-7893/CDA-7892

models if the changer compatible with CD-Text is

connected).

NOTE

When using the Versatile Link Terminal (KCA-410C), you can

connect two external inputs. To select the mode, press the BAND

button on the unit.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select

“SCR”(SCROLL).

15-EN

SETUP Operation

PWR-IC ON (CDA-7892: PWR ON):

The speakers are driven by the built-in amplifier.

BAND

Rotary encoder

Speakers

SPEAKER

RIGHT FRONT

Front

right

SPEAKER

RIGHT REAR

Rear

right

g DN f UP

SETUP

SPEAKER

LEFT REAR

Rear

left

SPEAKER

LEFT FRONT

Connecting to an External Amplifier

(CDA-7894/CDA-7893/CDA-7892 only)

Front

left

NOTE

When an external amplifier is connected, sound quality

can be improved by stopping the power supply of the

buit-in amplifier. The power output is set to OFF by the

following procedure.

No sound is produced by the system when the power output is set

to OFF

Press the SETUP button to return to normal mode.

Press and hold the SETUP button for at least 3

seconds.

Setting the Defeat of the External

Input

Press the f UP or g DN button to select "PWR-

IC" (CDA-7892: "PWR").

When auxiliary devices such as a TV or video game,

etc., are used with this unit, you can use the audio

function to set the mode between BASS, TREBLE and

MX Defeat ON/OFF.

Press the BAND button to toggle the mode between

PWR-IC ON (CDA-7892: PWR ON) and PWR-IC OFF

(CDA-7892: PWR OFF).

Press and hold the SETUP button for at least 3

seconds.

PWR-IC OFF (CDA-7892: PWR OFF):

When activating the speakers, this setting can be

performed by connecting between the front and rear

pre-amplifier of the unit and the external amplifier. In

this setting, nothing is output to the speakers.

Press the f UP or g DN button to select "INT."

Press the BAND button to toggle the mode between

INT ON and INT OFF.

Front

left

When using Initial mode, set this to ON.

When the Initial mode is not selected, set this to OFF.

Amplifier

Front

right

Press the SETUP button to return to normal mode.

Rear

left

Amplifier

Rear

right

16-EN

Demonstration

Adjusting Display Contrast

(CDA-7995 only)

This unit has a Demonstration feature which simulates the

display functions.

You can adjust the display contrast for better visibility.

Press and hold the SETUP button for at least 3

seconds.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP or g DN button to select the

DEMO mode.

Press the f UP or g DN button to select

“CONTRAST.”

Press the BAND button to turn on or off the DEMO

mode.

Each press toggles between DEMO ON and DEMO

OFF.

Turn the Rotary encoder to adjust the contrast of the

display.You can adjust in a range of -6 and +6.

The initial setting at the factory is "0."

Press the SETUP button to set the selected mode.

If no button is pressed for 30 seconds, the DEMO

mode activates.

NOTES

•

The initial setting at the factory is “DEMO OFF.”

To quit DEMO mode, set to “DEMO OFF.”

Press the SETUP button again to return to normal

operation.

17-EN

Radio Operation

Press the TUNE button to illuminate the DX and SEEK

indicators in the display.

With the DX (Distance) mode activated, both strong

and weak stations will be tuned in the Auto-Seek

operation.

Press again to return to the local mode. The DX

indicator will turn off and the SEEK indicator will

remain illuminated. Now, only strong stations will be

tuned.

SOURCE

TUNE/A.ME

BAND

Press the g DN or f UP button to automatically

seek for a station downward or upward respectively.

The unit will stop at the next station it finds.

g DN f UP

Preset buttons (1 through 6)

Press the same button again to seek the next station.

Manual Storing of Station Presets

Manual Tuning

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

Press the SOURCE button until a radio frequency

appears in the display.

Press and hold any one of the Preset buttons

(1 through 6) that you want to store the station on for

at least 2 seconds. The selected station is stored.

The display shows the band, preset No. with a triangle

(9) and station frequency memorized.

Press the BAND button repeatedly until the desired

radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → AM

Repeat the procedure to store up to 5 other stations

onto the same band.

To use this procedure for other bands, simply select

the band desired and repeat the procedure.

A total of 18 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2 and AM).

Press the TUNE button repeatedly until “DX SEEK” and

“SEEK” disappear from the display.

NOTE

The initial mode is DX SEEK.

NOTE

Press the g DN or f UP button to move

downward or upward one step respectively until the

desired station frequency is displayed.

If you store a station in a preset memory which already has a

station, the current station will be cleared and replaced with the

new station.

NOTE

The ST indicator appears on the display when a Stereo FM

station is tuned in.

Automatic Seek Tuning

Press the SOURCE button until a radio frequency

appears in the display.

Press the BAND button repeatedly until the desired

radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → AM

18-EN

Automatic Memory of Station Presets

Tuning to Preset Stations

Press the SOURCE button to select the radio mode.

Press the BAND button repeatedly until the desired

radio band is displayed.

Press the BAND button repeatedly until the desired

band is displayed.

Press and hold the A. ME button for at least 2 seconds.

The frequency on the display continues to change

while the automatic memory is in progress. The tuner

will automatically seek and store 6 strong stations in

the selected band. They will be stored into buttons 1 to

6 in order of signal strength.

Press the station Preset button that has your desired

radio station in memory.

The display shows the band, preset number with a

triangle and frequency of the station selected.

When the automatic memory has been completed, the

tuner goes to the station stored in the preset location

No. 1.

NOTE

If no stations are stored, the tuner will return to the original

station you were listening to before the auto memory procedure

began.

19-EN

CD Player Operation

Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The

movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE

button to switch to the CD mode.

SOURCE

-/J

The mode will change every time the button is pressed.

→ TUNER → CD → CD CHANGER∗

(∗ Only when the CD changer is connected)

g DN f UP

REPEAT

To pause playback, press the -/J button.

Pressing the -/J button again will resume playback.

To eject the disc, press the c button.

Opening and Closing the Movable

display

NOTES

•

Do not insert or remove a CD when loading or ejecting a CD,

as malfunction may result.

•

If the CD does not eject, press c button again for more than

3 seconds with the movable display open.

Press the c button.

The movable display will open.

About discs that can be used with the

CDA-7995/CDA-7894 models.

We recommend using only compact discs containing the

marks shown below.

You can play CD-Rs (CD-Recordable)/CD-RWs (CD-

ReWritable) for audio use on this unit.You can also play

CD-Rs/CD-RWs containing MP3 formatted audio files.

To close the movable display, press the c button

again.

• Some of the following CDs may not play on this unit:

Flawed CDs, CDs with fingerprints, CDs exposed to

extreme temperatures or sunlight (e.g., left in the car

or this unit), CDs recorded under unstable conditions,

CDs on which a recording failed or a re-recording was

attempted.

• Use discs with MP3 files written in the format

compliant with ISO 9660 level 1 or level 2. For details,

see page 26-27.

The movable display will close.

NOTES

•

Do not apply shock to the movable display when it is open as

it may result in malfunction of the unit.

•

The display may be dim during low temperatures and

immediately after turning on the power. The brightness will

return to normal as time elapses.

•

The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it

is opening or closing to avoid damage or injury. The back of the

movable display will get very warm under normal operating

conditions. This is not a malfunction. Do not touch.

Playback

Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

20-EN

Music Sensor (Skip)

About discs that can be used with the

CDA-7893/CDA-7892 models.

Momentarily press the g DN button once during CD

play to return to the beginning of the current track. If

you wish to access the beginning of a track further

back, repeatedly press until you reach the desired

track.

We recommend using only compact discs containing the

marks shown below.

You can play CD-Rs (CD-Recordable)/CD-RWs (CD-

ReWritable) for audio use on this unit.You can not play

CD-Rs/CD-RWs containing MP3 formatted audio files.

Press the f UP button once to advance to the

beginning of the next track. If you wish to access the

beginning of a track further ahead, press repeatedly

until the desired track is reached.

• Some of the following CDs may not play on this unit:

Flawed CDs, CDs with fingerprints, CDs exposed to

extreme temperatures or sunlight (e.g., left in the car or

this unit), CDs recorded under unstable conditions,

CDs not designed for audio use, CDs on which a

recording failed or a re-recording was attempted.

NOTE

The music sensor feature is functional in the play or pause

mode.

Fast Forward and Backward

Press and hold the g DN or f UP button to

quickly move backward or forward until you reach the

desired section of the track.

Repeat Play

On handling Compact Discs (CD/CD-R/

CD-RW)

Press the REPEAT button to play back repeatedly the

track being played.

• Do not touch the surface.

The track will be played repeatedly.

• Do not expose the disc to direct sunlight.

• Do not affix stickers or labels and do not write on the

surface.

Press the REPEAT button again and select OFF to

deactivate the repeat play.

NOTES

• Clean the disc when it is dusty.

• Make sure that there are no bumps around the disc.

• Do not use commercially available disc accessories.

•

If a CD Changer is connected and the RPT ALL mode is

selected, the unit repeatedly plays back all tracks on the disc

selected.

→ RPT → RPT ALL

→

(off)

Do not leave the disc in the car or the unit for a long

time. Never expose the disc to direct sunlight. Heat

and humidity may damage the CD and you may not be

able to play it again.

•

In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

In case a 12-disc CD changer is connected:

In changer mode, press the “F” button twice to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

21-EN

CD Player Operation

Controlling CD Changer (Optional)

SOURCE BAND

Select buttons (1 through 6)

An optional 6-disc or 12-disc CD Changer may be

connected to the CDA-7995/CDA-7894/CDA-7893/CDA-

7892 if it is Ai-NET compatible. With a CD Changer

connected to the Ai-NET input of the CDA-7995/CDA-

7894/CDA-7893/CDA-7892, the CD Changer will be

controllable from the CDA-7995/CDA-7894/CDA-7893/

CDA-7892.

Using the KCA-400C (Multi-Changer Switching device) or

the KCA-410C (Versatile Link Terminal) multiple

changers can be controlled by the CDA-7995/CDA-7894/

CDA-7893/CDA-7892.

M.I.X.

SCAN

See the Multi-Changer Selection section on page 23 for

selecting the CD Changers.

M.I.X. (Random Play)

NOTES

Press the M.I.X. button in the play or pause mode.

The tracks on the disc will be played back in a random

sequence.

• The controls on the CDA-7995/CDA-7894/CDA-7893/CDA-

7892 for CD Changer operation are operative only when a CD

Changer is connected.

• The “Changer” indicator illuminates when a CD Changer is

connected.

To cancel M.I.X. play, press the M.I.X. button again to

• The DVD changer (optional) is controllable from the CDA-7995/

CDA-7894/CDA-7893/CDA-7892 as well as the CD changer.

turn off the M.I.X.

NOTES

• If a CD Changer equipped with the ALL M.I.X. function is

connected, ALL M.I.X. will also be selectable.

In this mode, the tracks on all the CDs in the current

magazine will be included in the random playback sequence.

Press the SOURCE button to activate the CHANGER

mode. The display shows the disc number and track

number.

→ M.I.X. → ALL M.I.X. → (off)

NOTE

The source indicator varies depending on the connected source.

•

In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to illuminate

the "FUNC" indicator and go to step 1 within 5 seconds.

Press the Disc Select buttons (1 through 6)

corresponding to one of the discs loaded in the CD

Changer. The selected disc number appears in the

display and CD playback starts.

NOTES

•

After selecting the desired disc, you can operate in the same

way as for the CDA-7995/CDA-7894/CDA-7893/CDA-7892

CD player.

Scanning Programs

Press the SCAN button to activate the Scan mode.

The first 10 seconds of each track will be played back

in succession.

For details, please see the CD Operation section.

If the "FUNC" indicator is illuminated the Disc Select buttons

become nonfunctional.

•

To stop scanning, press the SCAN button and

When a 12-disc CD Changer is connected:

deactivate the Scan mode.

To select discs numbered from 1 to 6, the procedure is

the same as for the 6-disc CD Changer. To select discs

numbered from 7 to 12, first press the “F” button. This

changes the “D” indicator to “d.” Then press the desired

Preset button. With the “F” button activated, the Preset

buttons 1 to 6 will represent discs 7 to 12 respectively.

NOTES

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

•

In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to illuminate

the "FUNC" indicator and go to step 1 within 5 seconds.

22-EN

Multi-Changer Selection

The CD Changer Selection mode remains active for 8

seconds after step 2 is performed. Press the BAND

button until the desired CD Changer indicator appears

on the display.

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers, the

KCA-400C (Multi-Changer Switching device) must be

used. If you use 1 Switching device, you can connect up

to 4 CD Changers. If you use 2 Switching devices, you

can connect up to 6 CD Changers. When using KCA-

410C (Versatile Link Terminal), you can connect two

changers and two external outputs (AUX).

NOTE

If the selected CD Changer is not connected, the display will

show “NO CHGR .”

Alternatively press the BAND button on the Remote

Control until the desired changer indicator appears on

the display.

To operate the selected changer, see “CD Player

Operation” section.

Press the SOURCE button on the CDA-7995/CDA-

7894/CDA-7893/CDA-7892 to activate the CD Changer

mode.

NOTE

For further details about the external input (AUX) when using

KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 15.

Alternatively, press the SOURCE button on the Remote

Control (RUE-4187) to activate the CD Changer mode.

SOURCE

BAND

Press the BAND button on the CDA-7995/CDA-7894/

CDA-7893/CDA-7892 or the RUE-4187 to activate the

CD Changer Selection mode.

23-EN

MP3 Operation

Playing MP3 Files with the CD

Changer (Optional)

Select buttons (1 through 6)

SOURCE

-/J

Rotary encoder

SCAN

If you connect a changer compatible with MP3, you can

play CD-ROMs, CD-Rs, and CD-RWs containing MP3

files on the CDA-7995/CDA-7894/CDA-7893/CDA-7892.

Press the SOURCE button to switch to the MP3

Changer mode.

The mode will change every time the button is

pressed.

g DN f UP FOLDER DN

FILE SEARCH

M. I. X.

The display shows the disc number and Folder

number.

FOLDER UP

REPEAT

For CDA-7995/CDA-7894/CDA-7893, Folder Number,

File Number and Elapsed Time are displayed. For

CDA-7892, File Number, Folder Number∗ and Elapsed

Time are displayed.

∗Press and hold the TITLE button for at least 3

seconds to change the File Number display to the

Folder Number display alternately.

Playing MP3 Files

(CDA-7995/CDA-7894 only)

The CDA-7995/CDA-7894 models include a built-in MP3

unit.You can play CD-ROMs, CD-Rs, and CD-RWs

containing MP3 files on this unit. Use the format

compliant with ISO 9660 level 1 or level 2.

For further information about playing or storing MP3

files, refer to pages 26 - 27 before using the unit.

Press the Disc Select buttons (1 through 6)

corresponding to one of the discs loaded in the CD

Changer.

To pause playback, press the -/J button.

Pressing the -/J button again will resume playback.

Press the c button.

The movable display will open.

NOTE

The unit can play discs containing both audio data and MP3

data.

Music Sensor (Skip)

Momentarily press the g DN button once during CD

play to return to the beginning of the current file. If you

wish to access the beginning of a file further back,

repeatedly press until you reach the desired file.

Insert a disc containing an MP3 file with the label

side facing up.

Insert a disc containing an MP3 file with the label side

facing up.

The disc will be pulled into the unit automatically. The

movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE

button to switch to the CD mode.

Press the f UP button once to advance to the

beginning of the next file. If you wish to access the

beginning of a file further ahead, press repeatedly until

the desired file is reached.

NOTES

•

The music sensor feature is functional in the play or pause

mode.

The mode will change every time the button is pressed.

→ TUNER

→ CD → CD CHANGER∗

•

Files are played back in their pathname order which was

used when they were written to the CD.

(∗ Only when the CD changer is connected)

To pause playback, press the -/J button.

Pressing the -/J button again will resume playback.

To eject the disc, press the c button.

NOTES

•

The unit can play discs containing both audio data and MP3

data.

•

The MP3 indicator is lit during MP3 playback.

24-EN

M.I.X. (Random Play)

Fast Forward and Backward

Press the M.I.X. button in the play or pause mode.

The files on the disc will be played back in a random

sequence.

Press and hold the g DN or f UP button to

quickly move backward or forward until you reach the

desired section of the file.

NOTE

To cancel M.I.X. play, press the M.I.X. button again to

turn off the M.I.X.

There is no audio output during fast forward/backward for MP3

files.

NOTES

• If an MP3 compatible CD changer with the ALL M.I.X.

function is connected, ALL M.I.X. will also be selectable.

When setting to M.I.X., the unit will play back the next disc

after playing back all files in the current disc. When set to

ALL M.I.X., the unit will play one file from each disc

sequentially.

Selecting Folders

Press the FOLDER DN or FOLDER UP button to

select the folder.

NOTE

→ M.I.X. → ALL M.I.X. → (off)

If a CD changer applicable to MP3 is connected:

In CD changer mode, press the “F” button to illuminate the

“FUNC” indicator and go to step 1 within 5 seconds.

•

When you select "FOLDER" and set to M.I.X. in the "Setting

the Range of MP3 File Selection" section on page 26, the

Files in the Folder are played back in random sequence. After

all the files have been played back, play does not shift to the

next Folder.

In case an MP3 compatible CD changer is connected:

In CD changer mode, press the “F” button to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

File Search

You can locate all the files on a disc and play them.

Press the FILE SEARCH button during playback.

The unit switches to File Search mode.

Scanning Programs

Turn the Rotary encoder to select the desired file.

Press the SCAN button to activate the Scan mode.

The first 10 seconds of each file will be played back in

succession.

Press the Rotary encoder to execute the setting.

The selected file starts to play.

To stop scanning, press the SCAN button and

deactivate the Scan mode.

NOTES

•

During search, press the FILE SEARCH button to cancel the

File Search mode.

NOTES

•

If a CD changer applicable to MP3 is connected:

In CD changer mode, press the “F” button to illuminate the

“FUNC” indicator and go to step 1 within 5 seconds.

•

When you select "FOLDER" in the "Setting the Range of MP3

File Selection" section on page 26, the first 10 seconds of

each File in the Folder will be played back.

•

If a CD changer applicable to MP3 is connected:

In CD changer mode, press the “F” button to illuminate the

"FUNC" indicator and go to step 1 within 5 seconds.

Repeat Play

Press the REPEAT button to play back repeatedly the

file being played.

The file will be played repeatedly.

Press the REPEAT button again and select OFF

to deactivate the repeat play.

NOTES

•

If a CD changer applicable to MP3 is connected and the RPT

ALL mode is selected, the unit repeatedly plays back all files

on the selected disc.

→ RPT → RPT ALL

→

(off)

•

When you select “FOLDER” and set to RPT ALL in the

"Setting the Range of MP3 File Selection" section on page 26,

the Files will be repeatedly played back.

If a CD changer applicable to MP3 is connected:

In CD changer mode, press the “F” button to illuminate the

“FUNC” indicator and go to step 1 within 5 seconds.

25-EN

MP3 Operation

Press the f UP or g DN button to select "CD-

DA/MP3."

BAND

Press the BAND button to toggle the mode between

CD-DA and CD-DA/MP3 (CD/MP3 is displayed on the

CDA-7892 model).

• CD-DA: Only CD data can be played back.

• CD-DA/MP3: Both CD data and MP3 file tracks can

be played back.

(For the CDA-7892 model, CD/MP3 are displayed)

g DN f UP

SETUP

Press the SETUP button to return to normal mode.

About MP3

Setting the Range of MP3 File

Selection

CAUTION

Except for personal enjoyment, duplicating audio data

(including MP3 data) or distributing, transferring, or

copying it, whether for free or for a fee, without the

permission of the copyright holder is strictly prohibited

by the Copyright Act and by international treaty.

You can set the range of MP3 file selection to “entire

disc contents” or “folder contents only.”

Press and hold the SETUP button for at least 3

seconds.

• What is MP3?

MP3, whose official name is “MPEG Audio Layer 3”, is a

compression standard prescribed by the ISO, the

International Standardization Organization and MPEG

which is a joint activity institution of the IEC.

Press the f UP or g DN button to select DISC/

FOLDER (file selection range).

Press the BAND button to toggle the mode between

DISC ALL and FOLDER.

MP3 files contain compressed audio data. MP3 encoding

is capable of compressing the audio data at extremely

high ratios shrinking music files by as much as one-tenth

their original size. This is achieved while still maintaining

near CD quality. The MP3 format realizes such high

compression

• DISC ALL : plays all the files on one disc

• FOLDER : plays files in the selected folder only.

NOTE

The initial setting at the factory is DISC ALL.

ratios by eliminating the sounds that are either inaudible

to the human ear or masked by other sounds.

Press the SETUP button to set the selected mode.

• Method for creating MP3 files

Playing MP3 Data

The software used to create MP3 files is widely sold or

free from various sources. For details on creating MP3

files, refer to the user's manual for that software.

The MP3 files that can be played back by this device

have the file extension “mp3”. Files with no extension can

not be played back.

You can select either playback only of CD data, or

playback of formatted CD data and MP3 files.

When a disc contains CD or the MP3 file data, playback

starts from the CD data portion of the disc.

Press and hold the SETUP button for at least 3

seconds.

26-EN

• Supported playback sampling rates and bit rates

• Formats supported

Sampling rates: 8 kHz - 44.1 kHz, bit rates: 8 - 320 kbps

Note that for sampling rates such as 11,025 kHz, this

device’s frame display (Page 12) may not display

correctly.

This device supports CD-ROM XA, Mixed Mode CD,

Enhanced CD (CD-Extra) and Multi-Session.

This device can not correctly play back discs recorded

with Track At Once or packet writing.

• ID3 tags

• Order of tracks

This device supports ID3 tag v1.

Track playback is based on the pathname order used for

the files when they were written to the CD.

If ID3 tag data is in an MP3 file, this device can display

the title (track title), artist name, and album name ID3 tag

data.

• When CD audio and MP3 files are both present on a

disk, playback starts from Folder No. 1.

This device can only display single-byte alphanumeric

characters and the underscore. For non-supported

characters, “NO SUPPORT” is displayed.

Also, the track display for CD audio data playback is the

track numbers recorded on the disc.

Terminology

Bit rate

• Producing MP3 discs

MP3 files are prepared, then written to a CD-R or CD-RW

using CD-R writing software. A disc can hold up to 512

files/folders (including Root Folders).

This is the “sound” compression rate specified for

encoding. The higher the bit rate, the higher the sound

quality, but also the larger the files.

• Media supported

Sampling rate

This value shows how many times per second the data

is sampled (recorded). For example, music CDs use a

sampling rate of 44.1 kHz, so the sound level is

sampled (recorded) 44,100 times per second. The

higher the sampling rate, the higher the sound quality,

but also the larger the volume of data.

The media that this device can play back are CD-ROMs,

CD-Rs, and CD-RWs.

• Corresponding File Systems

This device supports discs formatted with ISO9660 Level

1 or Level 2.

Encoding

Under the ISO9660 standard,

Converting music CDs, WAVE (AIFF) files, and other

sound files into the specified audio compression

format.

there are some restrictions to remember.

The maximum nested folder depth is 8 (including the

root directory). File/folder names are limited to 31

characters (including the extension).

Valid characters for folder/file names are letters A-Z (all

caps), numbers 0-9, and ‘_’ (underscore).

ID3 tag

Song information such as track titles, artist names,

album names, etc., written into MP3 files.

This device also can play back discs in Joliet, and other

standards that conform to ISO9660. However,

sometimes the file names, folder names, etc. are not

displayed correctly.

27-EN

XM Radio Operation

Press the g DN or f UP button to select the

desired channel. Holding the g DN or f UP

buttons will change channels continuously.

SOURCE CAT BAND

Preset buttons (1 through 6)

Checking the XM Radio ID Number

You need to provide XM with the unique XM Radio ID

number for your XM Radio Receiver in order to

subscribe to XM's programming.

This number is an 8 character alphanumeric number

that is printed on a label directly on the XM Receiver.

It can also be displayed on the screen of the CDA-7995/

CDA-7894/CDA-7893/CDA-7892 in the following way.

g DN f UP TITLE

SETUP

Receiving XM Channels with the XM

Receiver (Optional)

While receiving XM1/XM2, press the g DN or f

UP button to select channel “0.”

The unit alternately displays “RADIO ID” for 2 seconds,

then the ID number for 10 seconds.

∗

XM Satellite Radio is the next generation of audio

entertainment, with up to 100 brand-new digital

channels. For a small monthly fee, subscribers can hear

crystal-clear music, sports, news and talk, coast-to-

coast via satellite. For more information, visit XM’s

website at www.xmradio.com or call 1-877-XMRADIO.

To cancel the ID number display, set the channel to

other than “0.”

Tips

There is another way to display your ID number.

An optional XM Satellite Radio Receiver (TUA-T020XM)

may be connected to the CDA-7995/CDA-7894/CDA-

7893/CDA-7892 if it is Ai-NET compatible. With an XM

Receiver connected to the Ai-NET input of the CDA-

7995/CDA-7894/CDA-7893/CDA-7892, the XM Receiver

will be controllable from theCDA-7995/CDA-7894/CDA-

7893/CDA-7892.

1. Press and hold the SETUP button for at least 3 seconds.

2. Press the f UP or g DN button repeatedly to select

“ID.”

3. Press the BAND button to display your ID number.

4. After checking your ID number, press the SETUP button to

return to the normal display.

NOTES

∗ XM and its corresponding logos are trademarks of XM

Satellite Radio Inc.

•

You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.

You can check your ID number printed on the label on the

package of your XM Satellite Radio Receiver (TUA-T020XM).

NOTES

• The controls on the CDA-7995/CDA-7894/CDA-7893/

CDA-7892 for XM Receiver operation are operative

only when an XM Receiver is connected.

• The XM1 or XM2 band illuminates when in XM mode.

Press the SOURCE button to select RADIO Mode.

Press the BAND button to select XM1 or XM2.

Each press changes the band:

→ FM1 → FM2 → XM1 → XM2 → AM

28-EN

Storing XM Channel Presets

Changing the Display

Press the BAND button to select the desired band

(XM1 or XM2) you want to store.

Text information, such as the channel name, artist

name/feature, and song/program title, is available with

each XM channel. The unit can display this text

information as explained below.

After tuning in the desired channel, press and hold any

one of the Preset buttons (1 through 6) that you want

to store the station on for at least 2 seconds. The

selected station is stored.

In XM mode, press the TITLE button.

Each time you press this button, the display changes

as shown below.

Repeat the procedure to store up to 5 other channels

onto the same band.

To use this procedure for other bands, simply select

the band desired and repeat the procedure.

A total of 12 channels can be stored in the preset

memory (6 channels for each band; XM1 and XM2).

Channel Number

display

CLOCK

display

Channel Name

display

→

Song Title

display

Artist Name

display

←

NOTE

If you store a channel in a preset memory which already has a

station, the current channel will be cleared and replaced with the

new one.

NOTES

•

When The “Scroll Setting” (refer to page 15) is set to “SCR

AUTO”, the display scrolls.

When the CD Text Scroll Setting is set to “SCR MANUAL”

(CDA-7892: "SCR MANU"), the display scrolls only when

you operate the unit (POWER ON, BAND, etc., are

displayed.)

Receiving Stored XM Channels

Press and hold the TITLE button for more than 3 seconds to

scroll the display again.

“Channel Number” and “Clock” displays do not scroll.

Depending on the model, the display may differ from the one

shown above.

Press the BAND button to select the desired band

(XM1 or XM2).

•

→ FM1 → FM2 → XM1 → XM2 → AM

Press the channel Preset button that has your desired

satellite channel in memory.

Category Search

Category Search functionality allows you to search for a

specific channel by the category of programming it

offers, or to surf within a given category.

In XM mode, press the CAT button to display the

category of the channel that is currently selected for 5

seconds.

While the category is displayed, press the

g DN or f UP button to select a different

category (or leave it to stay with the same category.)

Within 5 seconds of selecting the category, press the

CAT button again to select the next channel within that

category. Repeatedly press the CAT button within 5

seconds to select additional channels within that

category.

When tuned in, the category is displayed for 5

seconds, then the display returns to normal mode.

NOTE

If you cannot find your desired category, the display shows

“----” for 2 seconds automatically.

29-EN

Remote Control Operation

g DN Button

Controls on Remote Control

Radio mode: SEEK (DN) Button

CD mode: Press the button to go back to the beginning

of the current track.

Power Button

Press the button to turn the power on/off.

f UP Button

Source Button

Press to select the audio source.

Radio mode: SEEK (UP) Button

CD mode: Press the button to advance to the

beginning of the next track.

-/J Button

Press the button to switch between the Play and Pause

modes for CD.

9 Button

Radio mode: Pressing the button will select, in

descending order, stations programmed into the radio's

presets as shown below.

ANGLE 89 Buttons

Press the button to adjust the angle of the movable

display.

→ 6 → 5 ... 1

Band/Program Button

Radio mode: BAND Button

Press the button and the band will change as shown

below.

CD Changer mode: DISC Select (DN) Button

Press the button to select a disc in descending order.

Mute Button

→ FM1 → FM2 → XM1 → XM2 → AM

Press the button to lower the volume by 20 dB instantly.

Press the button again to cancel.

Volume Adjustment Buttons

To increase the volume level:

Press the Lbutton

To decrease the volume level:

Press the Kbutton

Audio Processor Button∗∗

Press the button to call the external audio processor

mode.∗

∗

For the operation of external audio processor, refer to the Owner's

Manual of the external audio processor you purchased.

8 Button

∗∗ This button is used in conjunction with an optional Ai-NET

Radio mode: Pressing the button will select, in

ascending order, stations programmed into the radio's

presets as shown below.

processor.

→ 1 → 2 ... 6

CD Changer mode: DISC Select (UP) Button

Press the button to select a disc in ascending order.

30-EN

Battery Replacement

Applicable battery: Use two “AAA” sized dry batteries or

equivalent.

Point the remote control transmitter at the remote

control sensor.

Remote control sensor

Opening the battery cover

Slide out the battery cover while firmly pressing the

direction of arrow.

Replacing the battery

Put the batteries in the case observing the polarities as

illustrated.

Closing the cover

Push the cover as illustrated until a click is heard.

31-EN

Information

In Case of Difficulty

CD Player/Changer not functioning.

•

Out of operating temperature range +50˚C (+120˚F) for CD.

- Allow the vehicle's interior (or trunk) temperature to

cool.

If you encounter a problem, please turn the power off,

then on again. If the unit is still not functioning normally,

please review the items in the following checklist. This

guide will help you isolate the problem if the unit is at

fault. Otherwise, make sure the rest of your system is

properly connected or consult your authorized Alpine

dealer.

CD playback sound is wavering.

•

Moisture condensation in the CD Module.

- Allow enough time for the condensation to evaporate

(about 1 hour).

CD insertion not possible.

•

A CD is already in the CD player.

- Eject the CD and remove it.

Basic

No function or display.

•

The CD is being improperly inserted.

- Make sure the CD is being inserted following

instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

The CD has been damaged.

- Eject the CD and discard it; using a damaged CD in

your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

Improper mounting of the unit.

- Securely re-mount the unit.

Disc is very dirty.

•

Vehicle's ignition is off.

- If connected following instructions, the unit will not

operate with the vehicle's ignition off.

Improper power lead connections.

- Check power lead connections.

Blown fuse.

•

- Check the fuse on the battery lead of the unit; replace

with the proper value if necessary.

Internal micro-computer malfunctioned due to interference

noise etc.

•

- Clean the disc.

Disc has scratches.

- Change the disc.

The pick-up lens is dirty.

- Press the RESET switch with a ballpoint pen or other

pointed article.

- Do not use a commercial available lens cleaner disc.

Consult your nearest ALPINE dealer.

Radio

Unable to receive stations.

CD playback sound skips without vibration.

•

No antenna or open connection in cable.

- Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

•

Dirty or scratched disc.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

Unable to tune stations in the seek mode.

•

Mechanical error

•

You are in a weak signal area.

- Make sure the tuner is in the DX mode.

If the area you are in is a primary signal area, the antenna may

not be grounded and connected properly.

- Press the c button. After the error indication disappears,

insert the disc again. If the above-mentioned solution does

not solve the problem, consult your nearest ALPINE dealer.

•

- Check your antenna connections; make sure the antenna is

properly grounded at its mounting location.

The antenna may not be the proper length.

- Make sure the antenna is fully extended; if broken, replace

the antenna with a new one.

MP3

•

MP3 is not played back.

•

Writing error occurred. The CD format is not compatible.

- Make sure the CD has been written in a supported format.

Refer to "About MP3" on pages 26-27, then rewrite in the

format supported by this device.

Broadcast is noisy.

•

The antenna is not the proper length.

- Extend the antenna fully; replace it if it is broken.

The antenna is poorly grounded.

•

- Make sure the antenna is grounded properly at its mounting

location.

32-EN

Indication for CD Player

HI TEMP

Indication for CD Changer

HI TEMP

•

Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature returns to

within operation range.

•

Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature returns to

within operation range.

ERROR - 01

NO DISC

•

No CD is inserted.

- Insert a CD.

Although a disc is inserted, “NO DISC” is displayed and the

unit does not start to play or eject the disc.

- Remove the disc by following these steps:

1) Press the c button.

•

Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.

Check the indication. Insert the magazine again.

If the magazine cannot be pulled out, consult your Alpine

dealer.

The movable display will open.

Magazine ejection not possible.

2) Press the c button again for at least 3 seconds while the

movable display is open.

- Press the magazine eject button. If the magazine does

not eject, consult your Alpine dealer.

ERROR

ERROR - 02

•

Mechanism error.

•

A disc is left inside the CD Changer.

1) Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press the

c button again.

- Press the Eject button to activate the eject function. When the

CD Changer finishes the eject function, insert an empty CD

magazine into the CD Changer to receive the disc left inside

the CD Changer.

If the error indication still does not turn off after pressing

the c button for a few times, consult your Alpine dealer.

NO MAGZINE

(CDA-7995/CDA-7894/CDA-7893)

NOTE

When the “ERROR” is displayed:

In case that the disc cannot be ejected by pressing the c button,

press the RESET switch (refer to page 5) and press the c button

again.

NO MAGZN

(CDA-7892)

•

No magazine is loaded into the CD Changer.

- Insert a magazine.

If not ejecting, consult your Alpine dealer.

NO DISC

No indicated disc.

- Choose another disc.

33-EN

Information

Indication for XM Radio Mode

OFF AIR

ANTENNA

•

The channel currently selected has stopped broadcasting.

- Select another channel.

•

The XM antenna is not connected to the XM radio module.

- Check whether the XM antenna cable is attached securely to

the XM radio module.

– – – – –

(CDA-7995-CDA-7894/CDA-7893 only)

UPDATING

– – – –

(CDA-7892 only)

•

Radio is being updated with latest encryption code.

- Wait until encryption code is being updated. Channels

0 and 1 should function normally.

•

The user has selected a Channel Number that does not exist or

is not subscribed to.

- The unit will revert back to the previously selected channel.

There is no artist name/feature, song/program title, or

additional information associated with the channel at that time.

- No action needed.

NO SIGNL

•

XM signal is too weak at the current location.

- Wait until the car reaches a location with a stronger signal.

Radio is acquiring audio or program information.

- Wait until the radio has received the information.

34-EN

Specifications

FMTUNER SECTION

Tuning Range

GENERAL

Power Requirement

87.7 – 107.9 MHz

14.4 V DC

Mono Usable Sensitivity

50 dB Quieting Sensitivity

Alternate Channel Selectivity

Signal-to-Noise Ratio

Stereo Separation

9.3 dBf (0.8 µV/75 ohms)

(11–16 V allowable)

60 W × 4 (CDA-7894/CDA-

7893 only)

13.5 dBf (1.3 µV/75 ohms)

Maximum Power Output

80 dB

45 dB

2.0 dB

50W × 4 (CDA-7892 only)

4 V/10 k ohms (CDA-7995/

CDA-7894 only)

Maximum Pre-Output Voltage

Capture Ratio

2V/10k ohms (CDA-7893/

CDA-7892 only)

AM TUNER SECTION

Tuning Range

530 – 1,710 kHz

Maximum Subwoofer Output

Sensitivity (IEC Standard)

22.5 µV/27 dB

Voltage

Bass

4 V/10 k ohms

CD PLAYER SECTION

Frequency Response

14 dB at 60 Hz

14 dB at 10 kHz

1.5 kg (3 lbs. 5 oz)

5 – 20,000 Hz ( 1 dB)

Below measurable limits

0.008% (at 1 kHz)

95 dB (at 1 kHz)

105 dB

Treble

Weight

Wow & Flutter (% WRMS)

Total Harmonic Distortion

Dynamic Range

CHASSIS SIZE

Width

178 mm (7")

50 mm (2")

Signal-to-Noise Ratio

Channel Separation

Height

85 dB (at 1 kHz)

Depth

155 mm (6-1/8")

PICKUP

Wave length

NOSEPIECE SIZE

795 nm

Width

Height

Depth

170 mm (6-11/16")

46 mm (1-13/16")

18 mm (11/16")

Laser power

CLASS I

REMOTE CONTROL

Battery Type

Width

AAA batteries (2 pcs.)

42 mm (1-21/32")

121 mm (4-25/32")

23 mm (29/32")

Height

Due to continuous product improvement, specifications and design

are subject to change without notice.

Depth

Weight

50 g (1.8 oz)

35-EN

Installation and Connections

Before installing or connecting the unit, please read the

Caution

following and pages 3 and 4 of this manual thoroughly

for proper use.

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit requires special technical

skill and experience. To ensure safety, always contact the dealer

where you purchased this product to have the work done.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or

product damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM

SECURELY.

Be sure to use only the specified accessory parts. Use of other than

designated parts may damage this unit internally or may not securely

install the unit in place. This may cause parts to become loose

resulting in hazards or product failure.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the

seat rails) or sharp or pointed edges. This will prevent crimping and

damage to the wiring. If wiring passes through a hole in metal, use a

rubber grommet to prevent the wire’s insulation from being cut by

the metal edge of the hole.

NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to

electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN

SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to

prevent obstructions when driving. Cables or wiring that obstruct

or hang up on places such as the steering wheel, gear lever, brake

pedals, etc. can be extremely hazardous.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE

OR DUST.

Avoid installing the unit in locations with high incidence of

moisture or dust. Moisture or dust that penetrates into this unit

may result in product failure.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other

equipment. Doing so will exceed the current carrying capacity of

the wire and result in fire or electric shock.

Precautions

• Be sure to disconnect the cable from the (–) battery post before

installing your CDA-7995/CDA-7894/CDA-7893/CDA-7892.

This will reduce any chance of damage to the unit in case of a

short-circuit.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING

HOLES.

When drilling holes in the chassis for installation, take

precautions so as not to contact, damage or obstruct pipes, fuel

lines, tanks or electrical wiring. Failure to take such precautions

may result in fire.

• Be sure to connect the color coded leads according to the

diagram. Incorrect connections may cause the unit to

malfunction or damage to the vehicle's electrical system.

• When making connections to the vehicle's electrical system, be

aware of the factory installed components (e.g. on-board

computer). Do not tap into these leads to provide power for this

unit. When connecting the CDA-7995/CDA-7894/CDA-7893/

CDA-7892 to the fuse box, make sure the fuse for the intended

circuit of the CDA-7995/CDA-7894/CDA-7893/CDA-7892 has

the appropriate amperage. Failure to do so may result in damage

to the unit and/or the vehicle. When in doubt, consult your

ALPINE dealer.

• The CDA-7995/CDA-7894/CDA-7893/CDA-7892 uses female

RCA-type jacks for connection to other units (e.g. amplifier)

having RCA connectors. You may need an adaptor to connect

other units. If so, please contact your authorized ALPINE

dealer for assistance.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other

safety-related system), or tanks should NEVER be used for

installations or ground connections. Using such parts could

disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE

REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER

VEHICLE OPERATION, SUCH AS THE STEERING WHEEL

OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc.

and results in serious accident.

• Be sure to connect the speaker (–) leads to the speaker (–)

terminal. Never connect left and right channel speaker cables

to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space

provided below and keep it as a permanent record. The serial

number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

36-EN

Connect each input lead coming from an amplifier or

equalizer to the corresponding output lead coming from the

left rear of the CDA-7995/CDA-7894/CDA-7893/CDA-7892.

Connect all other leads of the CDA-7995/CDA-7894/CDA-

7893/CDA-7892 according to details described in the

CONNECTlONS section.

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove the

Detachable Front Panel.

If the Detachable Front Panel is removed during installation,

you might press too hard and warp the metal plate that holds it

in place.

Lock Pin

Slide the CDA-7995/CDA-7894/CDA-7893/CDA-7892 into

the dashboard. When the unit is in place, make sure the

locking pins are fully seated in the down position. This can

be done by pressing firmly in on the unit while pushing the

locking pin down with a small screwdriver. This ensures that

the unit is properly locked and will not accidentally come

out from the dashboard. Install the Detachable Front Panel.

Mounting Sleeve

(Included)

Dashboard

Removal

1 Remove the DETACHABLE FRONT PANEL.

2 Use a small screwdriver (or similar tool) to push the

locking pins to the “up” position (see above drawing). As

each pin is unlocked, gently pull out on the unit to make

sure it does not re-lock before unlocking the second pin.

3 Pull the unit out, keeping it unlocked as you do so.

CDA-7995/CDA-7894/CDA-7893/CDA-7892

Slide the mounting sleeve into the dashboard.

Screw

Hex Nut (M5)

∗∗

Bolt Stud

Face Plate

Metal

Mounting

Strap

∗

CDA-7995/

Ground Lead

CDA-7894/

CDA-7893/

CDA-7892

CDA-7995/

CDA-7894/

CDA-7893/

Chassis

Screws (M5 × 8)

(Included)

CDA-7892

Reinforce the head unit with the metal mounting strap (not

supplied). Secure the ground lead of the unit to a clean

Ground Lead

metal spot using a screw ( ) already attached to the

vehicle's chassis.

∗

NOTE

^{For the screw marked}**^{, use an appropriate screw for the}

Mounting Bracket

chosen mounting location.

NOTE

Secure the ground lead of the unit to a clean metal spot using a

screw ( ) already attached to the vehicle's chassis.

∗

37-EN

Installation and Connections

Connections

Antenna

Blue

POWER ANT

To power antenna

REMOTE

TURN-ON

Blue/White

To amplifier or equalizer

AUDIO

INTERRUPT IN

Pink/Black

Orange

To vehicle phone

ILLUMINATION

To the instrument cluster illumination

lead

(CDA-7995/CDA-7894/

CDA-7893 only)

IGNITION

BATTERY

Red

Choke coil

Ignition Key

Yellow

Black

GND

Battery

(CDA-7894/CDA-7893/

Speakers

CDA-7892 only)

Gray

SPEAKER

Gray/

RIGHT FRONT

Black

Front right

Violet/

Black

SPEAKER

RIGHT REAR

Violet

Rear right

Ai-NET

Green

(

NORM

EQ/DIV

SPEAKER

LEFT REAR

Green/

Black

Rear left

Front left

White/

Black

)

SPEAKER

LEFT FRONT White

CD Changer

Speakers

(Sold Separately)

;

Front Left

Amplifier

Front Right

;

Rear Left

Amplifier

Rear Right

Subwoofers

38-EN

Antenna Receptacle

(

)

Right Rear (+) Speaker Output Lead (Violet) (CDA-

7894/CDA-7893/CDA-7892 only)

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna,

if applicable.

Left Rear (+) Speaker Output Lead (Green) (CDA-

7894/CDA-7893/CDA-7892 only)

Left Rear (–) Speaker Output Lead (Green/Black)

(CDA-7894/CDA-7893/CDA-7892 only)

NOTE

This lead should be used only for controlling the vehicle's power

antenna. Do not use this lead to turn on an amplifier or a signal

processor, etc.

Left Front (–) Speaker Output Lead (White/Black)

(CDA-7894/CDA-7893/CDA-7892 only)

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

Left Front (+) Speaker Output Lead (White) (CDA-

7894/CDA-7893/CDA-7892 only)

Ai-NET Connector

Audio Interrupt In Lead (Pink/Black)

Connect this to the output or input connector of other

product (CD Changer, Equalizer, etc.) equipped with Ai-

NET.

Illumination Lead (Orange)

This lead may be connected to the vehicle's instrument

cluster illumination lead. This will allow the backlighting of

the CDA-7995/CDA-7894/CDA-7893 to dim whenever the

vehicle's lights are turned on.

NOTE

You can input TV/video sound by connecting an optional Ai-

NET/RCA Interface cable (KCA-121B) to this component.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's fuse

box or another unused power source which provides (+)12V

only when the ignition is turned on or in the accessory

position.

DC/DC Converter (CDA-7995/CDA-7894 only)

NOTES

•

Do not install the converter at a location subjected to water

such as under the floor mat or air conditioner. This may cause

a malfunction.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle's

battery.

•

Do not bundle the DC/DC converter cable with other audio

cables. Doing so may induce noise into your system.

Keep the DC/DC converter away from the Antenna cables and

the rear side of the unit, otherwise noise may be generated

when receiving radio broadcast.

NOTE (CDA-7894/CDA-7893 only)

Use an extension battery lead (20A)(sold separately) and

connect it directly to the positive (+) side of the vehicle's battery.

Ai-NET Cable (Included with CD Changer)

Front Output RCA Connectors

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle.

Make sure the connection is made to bare metal and is

securely fastened using the sheet metal screw provided.

Rear Output RCA Connectors

RED is right and WHITE is left.

Subwoofer RCA Connectors

RED is right and WHITE is left.

Fuse Holder

(5A ........ CDA-7995 only)

(15A ...... CDA-7892 only)

(20A ...... CDA-7894/CDA-7893 only)

;

RCA Extension Cable (Sold Separately)

System Switch

When connecting a processor or divider using Ai-NET, place

this switch in the EQ/DIV position. When no device is

connected, leave the switch in the NORM position.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray) (CDA-

7894/CDA-7893/CDA-7892 only)

NOTE

Right Front (–) Speaker Output Lead (Gray/Black)

(CDA-7894/CDA-7893/CDA-7892 only)

Be sure to turn the power off to the unit before changing the

switch position.

Right Rear (–) Speaker Output Lead (Violet/Black)

(CDA-7894/CDA-7893/CDA-7892 only)

To prevent external noise from entering the audio system.

• Locate the unit and route the leads at least 10 cm away from the car harness.

• Keep the battery power leads as far away from other leads as possible.

• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise

suppressors, contact them for further information.

• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

39-EN

40-EN

LIMITED WARRANTY

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality

craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any

questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

2 You should provide a detailed description of the

[PRODUCTS COVERED:

problem(s) for which service is required.

3 You must supply proof of your purchase of the product.

4 You must package the product securely to avoid

damage during shipment.

This Warranty covers Car Audio/Visual Products and

Related Accessories ("the product"). Products purchased in

the Canada are covered only in the Canada. Products

purchased in the U.S.A. are covered only in the U.S.A.

[HOW WE LIMIT IMPLIED WARRANTIES:

ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR

USE AND MERCHANTABILITY ARE LIMITED IN

DURATION TO THE PERIOD OF THE EXPRESS

WARRANTY SET FORTH ABOVE AND NO PERSON IS

AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE

PRODUCT.

[LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the

first consumer purchase.

[LIFETIME TAPE HEAD WARRANTY:

All Alpine Car Audio analog tape heads excluding Video

tape heads are warranted for life against manufacturing

defects causing failure.

[WHO IS COVERED:

This Warranty only covers the original purchaser of the

product, who must reside in the United States, Puerto Rico

or Canada.

[HOW WE EXCLUDE CERTAIN DAMAGES:

ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR

INCIDENTAL AND CONSEQUENTIAL DAMAGES

CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL

DAMAGES" REFERS TO EXPENSES OF

[WHAT IS COVERED:

This Warranty covers defects in materials or workmanship

(parts and labor) in the product.

TRANSPORTING THE PRODUCT TO THE ALPINE

SERVICE CENTER, LOSS OF THE ORIGINAL

PURCHASER'S TIME, LOSS OF THE USE OF THE

PRODUCT, BUS FARES, CAR RENTALS OR OTHERS

COSTS RELATING TO THE CARE AND CUSTODY OF

THE PRODUCT. THE TERM "CONSEQUENTIAL

DAMAGES" REFERS TO THE COST OF REPAIRING OR

REPLACING OTHER PROPERTY WHICH IS DAMAGED

WHEN THIS PRODUCT DOES NOT WORK PROPERLY.

THE REMEDIES PROVIDED UNDER THIS WARRANTY

ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.

[WHAT IS NOT COVERED:

This Warranty does not cover the following:

1 Damage occurring during shipment of the product to

Alpine for repair (claims must be presented to the

carrier).

2 Damage caused by accident, abuse, negligence,

misuse, improper connections, improper operation or

failure to follow instructions contained in the Owner's

manual.

3 Damage caused by act of God, including without

limitation, earthquake, fire, flood, storms or other acts of

nature.

4 Any cost or expense related to the removal or

reinstallation of the product.

5 Service performed by an unauthorized person, company

or association.

6 Any product which has the serial number defaced,

altered or removed.

7 Any product which has been adjusted, altered or

modified without Alpine's consent.

8 Any product not distributed by Alpine within the United

States, Puerto Rico or Canada.

9 Any product not purchased from an Authorized Alpine

Dealer.

[HOW STATE/PROVINCIAL LAW RELATES TO THE

WARRANTY:

This Warranty gives you specific legal rights, and you may

also have other rights which vary form state to state and

province to province. In addition, some states/provinces do

not allow limitations on how long an implied warranty lasts,

and some do not allow the exclusion or limitation of

incidental or consequential damages. Accordingly,

limitations as to these matters contained herein may not

apply to you.

[IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio

product has been installed in your vehicle by an Authorized

Installation Center, and this warranty stamped upon

installation by the installation center.

! Any product that has been determined to contain an

excessive amount of dust or dirt and any product that

contains other contaminants including liquid or foreign

objects.

[HOW TO CONTACT CUSTOMER SERVICE:

Should the product require service, please call the following

number for your nearest Authorized Alpine Service Center.

[HOW TO OBTAIN WARRANTY SERVICE:

U.S.A.

CANADA

1-800-ALPINE-1 (1-800-257-4631)

1 You are responsible for delivery of the product to an

Authorized Alpine Service Center or Alpine for repair

and for payment of any initial shipping charges. Alpine

will, at its option, repair or replace the product with a

new or reconditioned product without charge. If the

repairs are covered by the warranty, and if the product

was shipped to an Authorized Alpine Service Center or

Alpine, Alpine will pay the return shipping charges.

Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada

Audison LRX 5 600 User Manual
Braun MX 2050 User Manual
BT 6170 User Manual
Canon 166 A User Manual
Canon Camcorder 700D User Manual
Carson Manufacturing Company, Inc Car Amplifier SC 411 RD 1014 User Manual
Fusion Electronics Car Amplifier MS DA51600 User Manual
Hifionics Hifonics Maxxsonics Inc Car Amplifier BRZ1200 1D User Manual
JVC GR DV808 User Manual
JVC GR SXM525 User Manual