Acclaim Lighting Camera Accessories ISO13405 User Manual

®
USB Onl y  
I ntraoral Di gi tal Vi deo  
Camera System  
Part Number A5500  
Operator’s Manual  
CONGRATULATIONS  
®
Congratulations on your purchase of the Acclaim USB Only Intraoral Digital  
Video Camera System, the latest camera in the dental video imaging product line  
from Air Techniques, a leading manufacturer of dental and veterinary equipment  
since 1962.  
The Acclaim USB Only Camera System design offers the flexible benefits of USB  
Plug-N-Play technology that is easily integrated into any practice. The very light-  
weight one-piece toothbrush-size Acclaim Camera Handpiece is an extremely  
®
maneuverable instrument, which produces crisp, clear images. The Acclaim USB  
Only Intraoral Digital Video Camera System is hereafter referred to as the Acclaim  
System in this manual.  
Review and follow the guidelines included in this Operator’s Manual to ensure  
that your Acclaim System gives you the highest level of service.  
For product support and information on how to expand your Acclaim System,  
contact your authorized Air Techniques dealer.  
WARRANTY  
This Air Techniques equipment is warranted to be free from defects in material  
and workmanship from the date of installation for a period of 3 years.  
Any item returned to our factory through your authorized Air Techniques dealer,  
will be repaired or replaced at our option at no charge provided that our inspec-  
tion shall indicate it to have been defective. Dealer labor, shipping and handling  
charges are not covered by this warranty.  
This warranty does not apply to damage due to shipping, misuse, careless han-  
dling or repairs by other than authorized service personnel. Warranty void if  
installed or serviced by other than your authorized Air Techniques dealer service  
personnel. Air Techniques, Inc. is not liable for indirect or consequential damage  
or loss of any nature in connection with this equipment.  
This warranty is in lieu of all other warranties expressed or implied. No represen-  
tative or person is authorized to assume for us any liability in connection with the  
sale of our equipment.  
ON-LINE WARRANTY REGISTRATION  
Quickly and easily register your new Acclaim Camera on-line. Just have your  
product model and serial numbers available. Then go to either the Air  
warranty link  
, click the  
and complete the registration form.  
This on-line registration ensures a record for the warranty period and helps us  
keep you informed of product updates and other valuable information.  
3
SAFETY NOTICE  
GENERAL  
This equipment has been designed to minimize exposure of personnel to hazards.  
While the Acclaim System is designed for safe operation, certain precautions must  
be observed. Use of the Acclaim System not in conformance with the instructions  
specified in this manual may result in permanent failure of the unit.  
KNOWLEDGE OF WARNINGS AND CAUTIONS  
Users must exercise every precaution to ensure personnel safety, and be familiar  
with the warnings and cautions presented throughout this manual and summa-  
rized below.  
CAUTION: There are no user-serviceable parts inside. Servicing should be  
performed by qualified dealer service representatives only.  
K Connecting any device to the Acclaim System that does not meet the equiv-  
alent safety requirements of the system may reduce the safety effectiveness  
of the Acclaim System.  
K Unplug the system components from power before performing cleaning  
procedures.  
WARNING: To prevent fire or electrical shock, do not expose this equipment  
to rain or moisture.  
K Do not spray cleaning liquids or disinfectants directly on the camera hand-  
piece or the USB Umbilical. Use care not to allow liquids to run into inter-  
nal circuitry.  
K Do not wipe the surfaces using benzine, thinner, etc. as this may degrade  
the finish.  
DO NOT ATTEMPT INTERNAL SERVICE  
The interior of each component of the Acclaim System is only accessible by  
removing hardware with tools and should only be opened and serviced by an  
authorized service technician. Please contact your local authorized dealer for  
service. Failure to heed this warning may result in equipment damage and void-  
ing the warranty.  
Markings.  
The following terms or symbols are used on the equipment or in this manual  
to denote information of special importance:  
Alerts users to important Operating  
and Maintenance instructions. Read  
carefully to avoid any problems.  
Indicates type B equipment  
in accordance with IEC  
60601-1  
Alerts users that the infection control sheath must be  
used for only one patient and disposed of properly in  
accordance with local code.  
2
ATTENTION USERS:  
Manufacturing date code on serial number label is in the format:MONTH YYYY.  
4
SAFETY NOTICE  
Use of Accessory Equipment.  
The use of ACCESSORY equipment not complying with the equivalent safety  
requirements of this equipment may lead to a reduced level of safety of the  
resulting system. Consideration relating to the choice shall include:  
Use of the accessory in the PATIENT VICINITY  
Evidence that the safety certification of the ACCESSORY has been  
performed in accordance to the appropriate IEC 60601-1 and/or IEC  
60601-1-1 harmonized national standard.  
Use of ACCESSORIES or cables other than those specified or provided by Air  
Techniques or its ALLPRO Imaging division may result in increased EMISSIONS  
or decreased IMMUNITY of the EQUIPMENT.  
IMPORTANT INFORMATION  
General Notes.  
K All instructions in this manual form an integral part of the unit. They must  
be kept close to the unit and in readiness whenever required. Precise  
observance of these instructions is a pre-condition for use of the unit for  
the intended purpose and for its correct operation. This manual should be  
passed on to any future purchaser or operator.  
K Safety of the operator as well as trouble-free operation of the unit are only  
ensured if use is made of original equipment parts. Moreover, use may  
only be made of those accessories that are specified in the technical  
documentation or that have been expressly approved and released by the  
manufacturer for the intended purpose. The manufacturer cannot warranty  
for the safety or proper functioning of this unit in the case where parts or  
accessories are used that are not supplied by the manufacturer.  
K There is no guarantee against damage arising where parts or accessories  
are used that are not supplied by the manufacturer.  
K Observe the usage and storage conditions.  
K The Acclaim System may only be operated using authorized software.  
K The manufacturer regard themselves as being responsible for the equipment  
with regard to safety, reliability and proper functioning only if assembly,  
resetting, changes or modifications and repairs have been carried out by  
an authorized dealer and if the equipment is used in conformity with the  
instructions contained in this manual.  
K The device conforms to the relevant safety standards valid at this time.  
K Any reprinting of the technical documentation, in whole or in part, is subject  
to prior written approval by the manufacturer.  
Incorrect Usage  
K Any use that is not described in this manual as correct usage is considered  
as incorrect usage. The manufacturer is not to be held liable for any damage  
caused as a result of incorrect usage. The operator bears all risks.  
5
KEY PARTS IDENTIFICATION  
The Acclaim System is comprised of a Camera Handpiece and USB Umbilical.  
Each is boxed separately along with associated accessories and is available  
individually by their selling numbers A5520 and A5550 respectively. When  
shipped together as a complete Acclaim System, the sperate boxes are packed  
in a single box as selling number A5500. The following lists the components  
included with the Acclaim System.  
A5520 Camera Handpiece box includes:  
Item  
Qty  
Camera Handpiece  
1
Disposable Infection Control Sheaths  
Sample Pack for Camera Handpiece  
20  
1
Camera Handpiece Instruction Sheet  
Part Number A5537  
A5550 USB Umbilical box includes:  
Item  
Qty  
1
USB Umbilical  
(with embedded USB 2.0 interface  
control module)  
Camera Handpiece Holder  
Part Number A5145  
1
1
Operator’s Manual  
CD containing -  
Part Number A5551  
Part Number A5552  
WDM video drivers for DirectX 9 compli-  
ant streaming video capture software  
applications.  
1
USB Video Diagnostic Software  
PDF version of Operator’s Manual  
6
COMPONENT DESCRIPTION  
The Acclaim System is an intraoral camera system designed for dental and  
veterinary applications that consists of the Camera Handpiece, Camera  
Handpiece Holder and the USB Umbilical as described below.  
NOTE:  
Air Techniques’ VISIX Imaging Software is fully compatible with the Acclaim  
System. Contact your authorized Air Techniques dealer to acquire VISIX.  
Camera Handpiece - The Camera Handpiece is extremely lightweight with a  
high resolution, high sensitivity, auto-exposure controlled CCD sensor and a  
high performance lens system illuminated by ultra-bright white LED lamps. The  
fixed focus lens has a broad depth of field bringing all objects measuring  
between 6 and 50 mm into focus enabling the camera to finely detail a section  
of a single tooth to a full smile. The Camera Handpiece has the rich look and  
tactile feel of a metallic handpiece and provides 2 keypad buttons for fingertip oper-  
ating control of the system. The specific functions performed by the keypad  
buttons depend on the user-supplied compatible streaming video capture soft-  
ware application used.  
Camera Handpiece Holder - The Camera Handpiece Holder can be  
fastened in a convenient location for safe storage of the Camera Handpiece  
when it is not in use. In addition to storage, the Camera Handpiece Holder  
also has built-in magnet that turns off the Camera Handpiece power. This  
feature conserves energy and equipment wear so the camera is ready and  
operational when needed.  
USB Umbilical - An overall 13.5-foot cable assembly comprised of an USB  
2.0 high speed interface control module with an associated 4-foot USB 2.0  
cable and a 9-foot control umbilical. The USB 2.0 cable is terminated with a  
Type A USB connector while the control umbilical uses a quick-disconnect con-  
nector. The USB Umbilical connects between the Camera Handpiece and the  
user’s computer and provides a digital video output for use with a PC with user-  
supplied compatible streaming video capture software application.  
UNPACKING AND INSPECTION  
Unpack each component of the Acclaim System and inspect for physical  
damage such as scratched panels, damaged connectors, etc. If any damage is  
noted, immediately notify your Air Techniques authorized dealer immediately so  
corrective action can be taken.  
Make sure to save all packaging material in case repackaging and shipment is  
necessary.  
Verify that all listed items were received. If any item is missing, notify your Air  
Techniques authorized dealer.  
7
PRE-INSTALLATION INFORMATION  
IMPORTANT:  
When operating the Acclaim System connected to the USB port on a  
Computer System, the computer must be loaded with Air Techniques  
Authorized DirectX 9 compliant streaming video software application  
and authorized imaging software such as VISIX. Contact your dealer  
for available Computer Systems and software options.  
NOTE:  
VISIX Imaging Software is fully compatible with Acclaim Systems.  
Minimum Computer System Requirements - The Computer System (lap-  
top or computer, monitor, etc.) and any related peripheral or other equipment,  
supplied by the user, or a third party, must comply with the requirements for  
accessory Equipment as specified in the appropriate IEC 60601-1 and/or IEC  
60601-1-1 harmonized national standard.  
Unless otherwise stated, the components of the computer system must comply  
with the minimum requirements listed below.  
CPU Speed:  
Pentium-4, 2 GHz or higher  
Operating System:  
Windows 2000 Service Pack 4 or Windows  
XP Service Pack 1 with Microsoft knowledge  
base KB822603 update  
DirectX 9 compliant streaming video  
software application installed  
System RAM:  
CD ROM Drive:  
Monitor :  
256 MB  
24X or higher  
SVGA 17" with 800 x 600 resolution or  
higher  
Video Display Adapter:  
USB Port:  
16 MB video card with 800 x 600 pixel  
resolution and 32-bit color  
Must be USB 2.0 high speed, high power  
port  
System Properties.  
If unsure of the operating system version installed,  
check that it meets the necessary requirements by  
checking the System Properties window.  
This is done simply by right clicking the My Computer  
icon. Selecting Properties from the menu list displays the  
System Properties  
window as shown. The installed oper-  
General Tab.  
ating system version is listed under the  
System Properties window can also be displayed  
The  
from the Desktop Start button. Just press the Start button  
and select SettingsControl Panel and then System.  
8
HANDPIECE KEYPAD BUTTON FUNCTIONS  
1
2
3
Acclaim Camera  
Handpiece  
A5520  
Keypad Buttons - Each keypad button provides the Acclaim Camera  
Handpiece fingertip control over the PC streaming video capture software via the  
USB Umbilical. The specific functions performed by the keypad buttons depend  
on a software installation that supports the 2-button handpiece. Typical keypad  
actions provided below.  
NOTE:  
Simultaneously depressing both keypad buttons for approximately 3 seconds  
deactivates the Camera Handpiece LED light source. This is commonly used  
when imaging an X-ray on a light box.  
(1) Top Keypad Button  
Sends a Button 1 command to the PC.  
While the specific function performed  
depends on the setting of the video capture  
software application installed on the PC,  
this command typically freezes and  
unfreezes the image that is displayed on the  
computer monitor. (Press to go live. Release  
to freeze.)  
(2) Bottom Keypad Button  
(3) Handpiece Connector  
Sends a Button 2 command to the PC.  
While the specific action depends on the  
video capture software installed, it typically  
saves the image displayed on the computer  
monitor to the computer hard disk.  
An 8-pin connector socket that accepts  
connection of the keyed 8-pin quick  
disconnect plug end of the USB  
Umbilical.  
9
SYSTEM SETUP  
Installing the Acclaim System is as simple as making the necessary connections  
of the USB Umbilical between a PC loaded with an Air Techniques Authorized  
DirectX 9 compliant user-supplied streaming video software application such as  
VISIX and the Camera Handpiece. Perform the following procedures to set up the  
Acclaim System.  
Notes: Authorized Imaging Software, such as VISIX, supplied by the dealer or other  
company, must be installed on the computer in order to operate the Acclaim  
System.  
A Microsoft® Driver Not Signed statement may appear. If it does, click  
Continue to proceed with installation.  
WDM Driver Installation - Before connecting the Acclaim System to your  
computer or attempting to use it for the first time, run the Setup program on the  
Acclaim System Drivers and Utilities Disk included with the Acclaim System. The  
supplied CD provides the WDM drivers needed to communicate between the  
Acclaim System and the associated user-supplied USB streaming video software  
application installed on the PC computer system. Normally, this program runs  
automatically when the CD is inserted into the drive for the first time. If not, run the  
setup program located in the root directory of the CD (typically D:\Acclaim. msi).  
The Setup program guides the user through updating the computer library files,  
which must be completed before the Acclaim System will operate properly. More  
information can be found in the Installation Instructions and Notes file on the  
Acclaim System Drivers and Utilities Disk included with the system.  
Do not use the A5020 Camera Handpiece (blue and white plastic). Only the A5520  
Camera Handpiece (metallic) can be used with the USB Only Acclaim System.  
Do not twist or turn the cable connectors. The USB Umbilical connector is keyed  
and mates straight on with the A5520 Handpiece connector.  
Camera Handpiece Connection - Carefully connect the A5520 Camera  
Handpiece to the supplied USB Umbilical as follows:  
Connector  
1. Using the gray molded connector  
Key  
end of the USB Umbilical, align  
the connector key with the keyway  
of the Handpiece connector.  
2. Insert straight into Handpiece  
connector until it securely snaps  
into place.  
Camera  
Handpiece  
Camera Handpiece Connection  
(A5520 only)  
10  
SYSTEM SETUP  
USB Interface Connection - Connect the USB Type A connector side of the  
USB Umbilical to any available USB 2.0 High Speed port on the user supplied  
use the same USB port  
Computer System. Always make sure to  
nection of the USB cable is necessary.  
whenever recon-  
Computer  
USB Port  
USB Type A  
Connector  
USB  
Umbilical  
USB Interface Connection  
Use care when adhering the handpiece holder to selected surface.  
The double-sided adhesive fastens quickly and permanently.  
Camera Handpiece Holder Installation - Using the supplied double-  
sided adhesive fastener, the Camera Handpiece Holder, part number A5145,  
can be fastened to any convenient location for safe storage of the USB Umbilical  
or Camera Handpiece when not in use.  
Install the Camera Handpiece Holder as follows:  
1. Remove the protective film from the double-sided adhesive on the  
Handpiece Holder  
2. Attach the Camera Handpiece Holder to a flat, clean dry surface where  
the Acclaim Camera Handpiece or USB Umbilical can be located for  
convenient storage.  
11  
INFECTION CONTROL SHEATH  
The Acclaim System should be used with an infection control sheath  
covering the handpiece. Make sure to use a new disposable infection  
control sheath for each patient.  
The infection control sheath must be used for only one  
patient and disposed of properly in accordance with  
2
local code.  
NOTE:  
For optimum image clarity, the optically clear section of the sheath must be  
aligned with the camera lens by facing the camera/light source section of the  
handpiece down toward the paper layer.  
Disposable Sheath Installation - Install a new infection control sheath  
on the Camera Handpiece for each patient as follows:  
1. Remove the Camera Handpiece from the holder.  
2. Insert the Camera Handpiece tip between the second and third layers  
(between the outer paper and plastic layers) with the camera/light facing  
towards the paper layer. See A.  
3. Push the Camera Handpiece completely in until the tip is fully inserted into  
the narrow tip of the sheath. See B.  
4. Gently squeeze the illuminated tip of the Camera Handpiece between the  
thumb and index finger to ensure that the optically clear area of the sheath  
is flat against the lens tip. See C.  
5. Peel away and discard the top plastic layer and the bottom paper layer.  
See D.  
12  
SYSTEM OPERATION  
Verify that the video capture software is running and correctly configured.  
The Acclaim System is operated connected directly to a computer system running  
various PC USB streaming video capture software applications such as VISIX.  
The camera provides the image/video source while the computer and associated  
software are used to display and save the resultant images. Perform the following  
procedures to operate the Acclaim System when correctly connected to a  
computer.  
1. Remove the Camera Handpiece from the handpiece holder and observe  
that the computer display shows the high-resolution live video images  
taken by the camera.  
2. Place the camera lens window over area of interest and view image on  
display.  
3. Press the appropriate keypad button on the Camera Handpiece to freeze  
(ie. capture) the displayed image on the computer monitor screen. Press  
the keypad button again to unfreeze the displayed image. The keypad  
button used depends on the video capture software installed.  
4. Press the appropriate keypad button on the Camera Handpiece to save the  
captured image to the computer hard drive and then to return to a live  
image display. The keypad button used depends on the video capture  
software installed.  
5. Repeat steps 2 through 4 as necessary.  
6. When imaging an X-ray film on a light box, deactivate the LED light  
source by depressing both Camera Handpiece buttons simultaneously  
for approximately 3 seconds. Perform steps 2 through 4 to freeze and  
save the X-ray film image as desired.  
7. Return the Camera Handpiece to the holder when done. Verify that the LED  
light source and camera turns OFF.  
13  
CAMERA PORTABILITY  
Do not twist or turn the Handpiece Cable connector. The connector is keyed and  
mates straight on with Camera Handpiece connector.  
Whether detaching just the Camera Handpiece from the USB Umbilical and  
using with additional Acclaim USB Umbilicals installed on other computers or  
bringing the complete system (handpiece and umbilical), the Acclaim System is  
easily shared among patient operatories.  
Refer to the corresponding illustrations and perform the following when trans-  
porting only the Camera Handpiece.  
1. Retract collar of quick disconnect connector and simultaneously pull  
straight from the Handpiece connector.  
2. Release connector quick disconnect collar.  
3. Store the USB Umbilical by placing cable slide holder into the Handpiece  
Holder.  
4. Transport Handpiece to next operatory.  
5. Connect Handpiece at new location by aligning the connector key with the  
keyway of the mating USB Umbilical connector.  
6. Insert straight into Handpiece connector until it securely snaps into place.  
When transporting the complete Acclaim System (handpiece and umbilical)  
among patient operatories, simply disconnect the the USB connector end of the  
USB Umbilical, transport the system and reconnect to the new computer. Make  
sure that the computer in the new operatory is using compliant software.  
Connector Key  
Camera  
Handpiece  
Quick Disconnect  
Collar  
Camera Handpiece  
Detaching Camera Handpiece  
Connecting Camera Handpiece  
Quick Disconnect  
Connector End  
Handpiece Holder  
Cable Slide Holder  
Control Umbilical  
Stored USB Umbilical  
14  
FINAL SYSTEM CHECK  
USB Video Diagnostic - If live video is not displayed on the PC monitor of  
the Acclaim System when the streaming video capture software application is  
running, there could be a problem with the settings in the software application  
or with the camera system.  
Perform the USB Video Diagnostic procedure to check the following:  
K The camera and the USB 2.0 interface control module of the USB  
Umbilical are working correctly.  
K The USB Umbilical is correctly connected between the camera and the  
computer  
K The camera USB driver files are installed correctly on the PC.  
Conduct the USB Video Diagnostic by performing procedure the following steps.  
1. Go to the Start button and select Programs.  
2. Select the Acclaim program option and click on AMCAP and observe that  
the AMCAP screen opens.  
3. On the AMCAP screen, click DEVICES on the menu bar along the top of the  
RA is selected from  
screen and make sure that ACCLAIM USB ONLY CAMER  
the drop down list.  
4. Click OPTIONS on the menu bar along the top of the AMCAP screen and  
make sure that PREVIEW is selected from the drop down list.  
5. Depending on the outcome of the USB Video Diagnostic, perform one of  
the following:  
a. If a live image is correctly displayed, exit from AMCAP application and  
make sure that the streaming video capture software application is  
configured correctly.  
b. If a live image is not displayed, exit from AMCAP application and  
check the camera, USB Umbilical and USB driver file installation.  
c. If a live image is displayed but the image colors are not correct, reset  
the driver's video settings by performing the procedures of step 6.  
6. Reset the driver's video settings by performing the following:  
OPTIONS  
a. On the AMCAP screen, click  
on the menu bar along the  
top of the screen and select VIDEO CAPTURE FILTER from the drop  
down list.  
b. On the Properties screen select the VIDEO PROC AMP tab and then  
click the DEFAULT button. The image colors should now be correct.  
OK  
Click  
to close the Properties screen and exit from AMCAP  
application.  
15  
MAINTENANCE  
INSPECTION AND CLEANING  
Perform the following inspection and cleaning procedures periodically as a  
preventive maintenance measure to keep the Acclaim System in optimal  
condition resulting in trouble-free operation producing crisp, clear images.  
Do not attempt any internal service of Acclaim System components. Contact your  
local authorized air techniques dealer for service. Failure to heed this warning may  
result in equipment damage and voiding the warranty.  
Inspection - Routinely inspect each component of the Acclaim System for pos-  
sible defects as follows:  
1. Camera Handpiece -  
a. Check overall handpiece for chips, cracks or other irregularities.  
b. Check the lens window for debris or spots.  
c. Check the connector socket for damage.  
2. Cables and Connectors -  
a. Check cables for damaged or deteriorated insulation kinking or  
twisting.  
b. Check connectors for loose, bent or missing pins.  
c. Check that the quick-disconnect plug end snaps close to snugly  
secure the Camera Handpiece connector.  
Do not spray cleaning liquids or disinfectants directly on the camera hand-  
piece. Use care not to allow liquids to run into internal circuitry.  
Do not wipe the surfaces using benzine, thinner, etc. as this may degrade  
the finish.  
Do not autoclave the Camera Handpiece.  
CAUTION: Unplug the Acclaim System components before performing cleaning.  
The infection control sheath must be used for only one  
patient and disposed of properly in accordance with  
2
local code.  
Cleaning - Clean each component of the Acclaim System as necessary by  
performing the following procedures.  
1. Camera Handpiece - Following every patient use, remove the infection  
control sheath from the Camera Handpiece and dispose in accordance  
with local regulations. The Camera Handpiece can be wiped clean and  
disinfected with any non-corrosive surface disinfectant such as Birex® se.  
2. Camera Window Lens - Remove debris or spots from lens window by  
cleaning with alcohol and cotton swabs.  
16  
SPECIFICATIONS  
Power Consumption:  
USB powered device using less than 500  
mA. No external power supply is  
required.  
Video Outputs:  
Sensor:  
High Speed USB 2.0 Video  
¼ Inch CCD  
Format:  
NTSC  
Pixels:  
768 H X 494 V  
470 TV lines  
Resolution:  
Signal to Noise Ratio:  
Exposure Control:  
Illumination:  
> 50 dB  
Automatic  
Ultra-bright white LED lamps  
Normal, not mirrored  
50 Degrees horizontal  
10º to 40º C  
Image:  
Viewing Angle:  
Operating Temperature:  
Storage Temperature:  
Humidity:  
0º to 70º C  
10 to 90% non-condensing  
Classifications:  
Portable, Continuous Operation, Class  
2, Type B  
Protection for Ingress  
of Water:  
Ordinary  
Flammable Atmosphere:  
Cannot use in the vicinity of flammable  
anesthetic mixtures of air, oxygen or  
nitrous oxide.  
Minimum PC Requirements for USB Video:  
CPU Speed:  
Pentium-4, 2 GHz or higher  
Operating System:  
Windows 2000 Service Pack 4 or  
Windows XP Service Pack 1 with  
Microsoft knowledge base KB822603  
update  
DirectX 9 compliant streaming video  
software application installed  
USB Port:  
Must be USB 2.0 high speed, high power  
port  
17  
PHYSICAL CHARACTERISTICS  
Dimensions  
Length  
Width  
Height  
Weight  
Handpiece A5520:  
8.3 inches 1.0 inches 0.9 inches  
(21.08 cm) (2.54 cm) (2.29 cm)  
2.1 oz.  
(59 g)  
USB Umbilical A5550:  
13.5 feet  
(4.11 m)  
7.8 ounces  
(221.12 g)  
USB 2.0 Interface  
Control Module  
5.9 inches 1.9 inches 0.9 inches  
(15.0 cm)  
(4.8 cm)  
(2.3 cm)  
USB 2.0 Cable  
4 feet  
(1.22 m)  
Control Umbilical  
9 feet  
(2.74 m)  
ACCESSORIES  
The following lists the ordering number and description for accessory compo-  
nents available to maintain and expand the Acclaim USB Only Camera System  
to meet your professional needs. Contact your Air Techniques Dealer for  
information.  
Order  
Number  
Description  
A5500  
A5520  
A5550  
A5145  
Complete Acclaim System consisting of the following:  
Acclaim Camera Handpiece Assembly  
USB Umbilical  
Camera Handpiece Holder with Double-Sided Adhesive  
Fastener  
Replacement Disposable Infection Control Sheaths for Camera Handpiece  
A5110  
A5100  
Box of 100  
Box of 500  
74500  
VISIX Imaging Software, 5 Licenses, see page 19.  
18  
VISIX IMAGING SOFTWARE  
Consider VISIX, our new comprehensive digital imaging software application,  
providing seamless integration with our digital imaging suite; the Accent CCD  
Intraoral Sensor, ScanX PSP Systems and Acclaim Intraoral Cameras.  
Key Features.  
K Easy to learn.  
K Simple to use.  
K Acquire, mount, view and store images with just a few mouse clicks.  
K Customize images to personal preferences with our simple Set-Up 1-2-3  
tool.  
K Exposure - Our Stop Light Exposure System is a unique indicator to ensure  
optimum data capture. It helps you acquire great images by monitoring  
X-ray exposure.  
K Viewing - VISIX provides automatic image mounting that is completely  
customizable.  
K Flexibility - VISIX includes a built-in bridging solution to over 35 Practice  
Management Software titles.  
VISIX is the superb software complement for Acclaim. Contact your authorized  
dealer for further information.  
19  
Air Techniques and ALLPRO Imaging are leading manufacturers of  
fine dental, medical and veterinary equipment from air and vacuum  
systems and X-ray film processors, to an impressive line of new  
products incorporating the most recent technological advances.  
These new products, vital components of the innovative professional  
practice, include intraoral cameras, digital imaging systems, which  
utilizes phosphor plate technology and, most recently, an intraoral  
digital X-ray system using sensor technology.  
Air Techniques and ALLPRO Imaging have been manufacturing  
quality products for the dental, medical and veterinary professional  
since 1962.  
Air Techniques and ALLPRO Imaging products are distributed only  
K
K
K
K
K
K
K
K
K
K
K
K
AccentJ Intraoral Digital X-ray Image System  
Acclaim® USB Only Intraoral Digital Video Camera System  
Acclaim® Intraoral Digital Video Camera System  
AirStar®  
A/T 2000® XR  
GuardianJ Amalgam Collector  
1-800-AIR-TECH  
Peri-Pro®  
(1-800-247-8324)  
Provecta 70J  
Rinsendo Root Canal Disinfection System  
ScanX®  
STSJ  
VacStarJ  
K
K
K
K
K
K
K
K
K
K
K
K
100 Plus  
2010  
Medscope  
Provecta V  
ScanX® 12  
ScanX® DVM  
ScanX® 12DVM  
ScanX® NDT  
ScanX® 12 Portable  
1-800-AIR-TECH  
ScanX® 14 Portable  
(1-800-247-8324)  
ScanX® NDT Portable  
ScanX® 14 In-Counter  
ALLPRO Imaging is a Division of Air Techniques, Inc  
© Copyright 2006, P/N A5551 Rev. C  

Bogen Communications Car Amplifier HTA 125A User Manual
Burley Kazoo User Manual
Bushnell Binoculars 26 2024W User Manual
Canon Camera Accessories 5D MK II User Manual
Epson SR 600 User Manual
Equator BCR 500 User Manual
Farenheit Technologies DVD 34TV User Manual
Honeywell 88065 User Manual
IDEAL INDUSTRIES 30 User Manual
JVC Car Stereo System KD R820BT User Manual