Quick Start Guide
12" and 15" Modero Color Video Touch Panels (Firmware version G4)
For more detailed installation, configuration, programming, file transfer, and
operating instructions, refer to the 12" and 15" Modero Touch Panel Series
Modero CV Specifications (Cont.)
Operating /Storage
Environments:
•
•
•
•
Operating Temperature: 10° C (50° F) to 40° C (104° F)
Operating Humidity: 20% - 85% RH
Storage Temperature: -20° C (-4° F) to 60° C (140° F)
Storage Humidity: 5% - 85% RH
NXD panel
(Wall Mount)
NXA-AVB:
A/V Breakout Box:
FG2254-01 (FIG. 2)
•
•
Included accessory with CV12 and CV15 panels
Provides video/audio distribution to the A/V panel over CAT5 cable
(up to 200’/60.96 m) and accepts either Composite or S-Video
Supported Audio
Sample Rates:
•
•
•
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz,
12000Hz,11025Hz, and 8000Hz.
NXT panel
(Table Top)
Included
Accessories:
Installation Kit for 12"/15" panels (KA2250-02):
- One 2-pin mini-Phoenix connector (41-5025) and
- Three Phillips-head screws (#4-20 x 0.250 Black) (80-0114-08)
Modero Table Top Cable (CA2250-50) provided with all NXT panels.
Optional
Accessories:
•
•
•
CB-TP12 Conduit/Wallbox (FG031-10)
CB-TP15 Conduit/Wallbox (FG032-10)
FIG. 1 Sample Wall Mount and Table Top CV Touch Panels
MB-TP12 Universal VESA Mounting Box (FG031-50):
- One strain relief grommet (45-0004-03)
ATTENTION!
- One black metallic VESA back box (62-0031-50)
- One black plastic cover (with grommet opening) (60-0031-50)
- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)
- Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139)
Verify you are using the latest NetLinx Master Firmware (available from
www.amx.com) on your ME260/64 and NI-Series Controllers. Verify the
TPDesign4 program being used is Version 2.4 or higher.
•
MB-TP15 Universal VESA Mounting Box (FG032-50):
- One strain relief grommet (45-0004-03)
- One black metallic VESA back box (62-0032-50)
- One black plastic cover (with grommet opening) (60-0032-50)
- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)
- Twelve Phillips-head screws (#6-32 x 0.500 Black) (80-0139)
NXA-BASE/B Battery Base Kit (FG2255K)
1 battery base (FG2255) and 2 NXT-BP batteries (FG2255-10)
NXA-RK12 Rackmount kit for 12" Wall Mount panels (FG2904-50)
NXA-RK15 Rackmount kit for 15" Wall Mount panels (FG2904-51)
NXA-WC80211b, 802.11B Wireless Card (FG2255-02)
NXT-CHG Kit (FG2250-50K):
1 charger (FG2250-50) and 2 NXT-BP batteries (FG2255-10)
Overview
The 12" (NXT/NXD-CV12) and 15" (NXT/NXD-CV15) Video panels are
4th generation graphics touch panels that provide richer colors and crisper
contrast than any panels currently on the market.
•
•
•
•
•
Modero tilt panels now come with an optional NXA-BASE/B battery base
that allows it to function off the collective charge of two internal
NXT-BP batteries that can be charged either in the base or in an optional
NXT-CHG charger.
•
•
•
PSN4.4 Power Supply (12 VDC) (FG423-45)
PSN6.5 Power Supply (12 VDC) (FG423-41)
Upgrade SDRAM memory:
NXA-EXM128M - 128 MB memory card (FG079-01)
NXA-EXM256M - 256 MB memory card (FG079-02)
Specifications
•
Upgrade Compact Flash (factory programmed with firmware):
NXA-CFTP128M - 128 MB compact flash card (FG2116-22)
NXA-CFTP256M - 256 MB compact flash card (FG2116-23)
NXA-CFTP512M - 512 MB compact flash card (FG2116-24)
NXA-CFTP1GB - 1 GB compact flash card (FG2116-25)
Modero CV Specifications
Dimensions (HWD):
NXT-CV15
(FG2252-11)
NXD-CV15
(FG2253-12)
CB-TP15
(FG032-10)
•
12.94" x 14.95" x 11.73" (32.87 cm x 37.97 cm x 29.78 cm)
Fully lowered height: 7.45" (18.92 cm)
NXA-AVB A/V Breakout Box
•
•
Decor faceplate included: 14.37" x 15.20" x 3.31"
(36.50 cm x 38.61 cm x 8.40 cm)
Conduit/wallbox: 13.48" x 14.18" x 3.49"
(34.24 cm x 36.00 cm x 8.85 cm) (optional)
FIG. 2 shows the front and rear connectors on the Breakout Box.
Composite/
S-Video
Luma
S-Video Chroma
ICSNet (to panel)
Dimensions (HWD):
NXT-CV12
(FG2250-11)
(front)
Power In
•
10.91" x 12.34" x 12.50" (27.70 cm x 31.33 cm x 31.75 cm)
Fully lowered height: 6.77" (17.20 cm)
NXD-CV12
(FG2251-12)
CB-TP12
(FG031-10)
•
•
Decor faceplate included: 12.38" x 12.59" x 3.25"
(31.43 cm x 31.97 cm x 8.25 cm)
Conduit/wallbox: 11.52" x 11.60" x 3.50"
(29.27 cm x 29.47 cm x 8.89 cm) (optional)
(rear)
Audio
In
Audio/Video
(to panel)
Power Requirements
(CV12):
•
•
Constant current draw: 2.04 A @ 12 VDC (stand-alone)
Startup current draw: 3.0 A @ 12 VDC (stand-alone)
Power (to panel)
ICSNet In
Mic Out
Power Requirements
(CV15):
•
•
Constant current draw: 3.45 A @ 12 VDC (stand-alone)
Startup current draw: 5.1 A @ 12 VDC (stand-alone)
FIG. 2 Connector layouts on the NXA-AVB Breakout Box (included)
Minimum power
supply required:
•
•
CV12: requires a PSN4.4 Power Supply (FG423-45)
Connections and Wiring
- using accessories can increase the power draw requirements
CV15: requires a PSN6.5 Power Supply (FG423-41)
- using accessories can increase the power draw requirements
FIG. 3 shows the layout of the connectors (located on the rear of the base
on the NXT and on the left side panel of the NXD panels).
Memory:
•
•
64 MB SDRAM (upgradable to 256 MB)
64 MB Compact Flash (upgradable to 1 GB factory programmed)
Audio-Video from NXA-AVB
(CAT5)
Ethernet (CAT5)
Resolutions:
Front Panel:
•
•
12" panels: 800 x 600 pixels
15" panels: 1024 x 768 pixels
ICSNet
(CAT5)
•
•
•
Light Sensor: Photosensitive light detector for automatic adjustment of
the panel brightness
Motion Sensor (PIR): Proximity Infrared Detector to wake the panel
when panel is approached
Sleep Button: Pushbutton (grey) used to either put the panel into a
"sleep" or "wake" state
Microphone: Used for intercom applications
Speakers: Frequency response 450 Hz - 7 KHz
A
L
12VDC
PWR
AUDIO
VIDEO
/
ETHERNET
10/100
ICSNet
PCMCIA/
Cardbus slot
•
•
Power
Stereo Output
Rear Connectors:
•
•
PCMCIA Card Slot: Provides wireless connectivity (with upgrade)
Stereo Ouput Connector: Stereo output through a 3.5mm mini-jack
(for use with external speakers or headphones)
FIG. 3 Connector layout on the CV Touch Panels
•
Audio/Video Connector: RJ-45 connection for A/V signals between the
NXA-AVB Breakout Box and the panel
Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication
ICSNet Connector: RJ-45 connection for ICSNet interface
Power Connection
•
•
A PSN4.4 or PSN6.5 Power Supply can indirectly supply power to the
Modero panels via the NXA-AVB Breakout Box. FIG. 4 shows a sample
wiring configuration using both an indirect or direct PSN power connection
for a CV Modero Panel.
|