Monarch 938 User Manual

Monarch® 938™ Verifier  
Product Specification  
• Assure High Quality Bar Codes  
• Performs Industry Standard Bar  
Code Tests  
• Fully Integrated Printer Interface  
• Used with 9855 , 9855™RFID or  
9860 Printers  
• Rugged Stand to assure  
Alignment  
Standard Features  
Dimensions:  
Height – 2.4" (61 mm)  
Width – 4.4" (112 mm)  
Communications Interface:  
DB 9 pin (male) connecting to printer serial port with  
baud rates up to 115200  
Depth – 5.2" (132 mm)  
Weight (Verifier only) – 2.0 lbs. (0.9 kg)  
Shipping Wt. (w/ stand) – 15 lbs. (6.8 kg)  
Display:  
Five LEDs – Power/Sync, Calibration, Read and 2  
programmable  
Supported Bar Code:  
Code 128, Code 39, Code 93, Codabar, Interleaved 2  
of 5, UPC versions A and E (including +2 and +5),  
EAN-13 and EAN-8 (including +2 and +5)  
Warranty:  
One (1) year parts and labor (ship-in).  
Full written warranty statement is available on request.  
Environment Ranges  
Operating Temperature:  
40° to 104° F (4° to 40° C)  
Humidity/Operating and Storage:  
10% to 90% non-condensing  
Storage:  
-4°F to 140°F (-20°C to 60°C)  
Performance  
Laser:  
Power Source:  
Supplied by the printer, no external power is required  
Focus Distance – 8" (203 mm)  
X Dimension – 0.0067" (0.17 mm) minimum  
Wavelength – 650-670 nm  
Bar Code Verification:  
ANSI Method, Traditional Method, Encoded data  
format checks, laser scanning type analyses  
Speed:  
Verifies bar codes at print speeds up to 12 ips  
Stores & Uploads:  
ANSI grade data  
Special Considerations  
• Support parallel (picket fence) bar codes only  
• Bar code must be in the beam for at least 5 scans  
• May require a reduction in print speed based upon  
bar code height  
• Maximum of four parallel bar codes across  
• Minimum horizontal gap between codes 0.5" (13 mm)  
• Minimum feed length for verification is 1.2" (30 mm)  
• Maximum number of codes per label is 10  
• Allow a 0.5" (13 mm) no scan zone at trailing of  
each label  
• Does not work with 926™ knife  
• For use with 9855®, requires metal cover or plastic  
verifier cover  
• Printer must be configured as verifier-ready  
• Documentation available at www.monarch.com  
Avery Dennison Printer Systems Division  
170 Monarch Lane Miamisburg, OH 45342  
1.800.543.6650 Monday-Friday, 8 AM-6:30 PM ET  
©2008 Avery Dennison. All rights reserved.  
Printed in U.S.A. BC-SP-028 Rev. 8/08  

Xerox Colorqubetm 9203 User Manual
Worth Data C488 User Manual
Ricoh Sp3510sf User Manual
Ricoh Aficio Mp 1350 User Manual
Philips Lr14ps8c User Manual
Panasonic Cw Xc100au User Manual
LG AS65GD User Manual
HP ELITEBOOK 2760P User Manual
HITACHI 36FX49B User Manual
DARTA DRT150 User Manual