LA36 ACTUATOR
To learn more about LINAK please visit:
W W W. L I N A K . C O M
Contents
Preface .................................................................................................................................................................4
Safety instructions...............................................................................................................................................5
Declarations of conformity .................................................................................................................................6
Warranty...............................................................................................................................................................8
Maintenance.........................................................................................................................................................8
Specifications .......................................................................................................................................................9
Mounting guidelines .........................................................................................................................................10
Applications hints ..............................................................................................................................................11
Manual hand crank............................................................................................................................................11
Electrical installation..........................................................................................................................................12
Motor connection ..........................................................................................................................................12
Connection of LA36 with CS16 .........................................................................................................................15
Troubleshooting.................................................................................................................................................15
Mounting of cables............................................................................................................................................16
Accessories .........................................................................................................................................................16
Drawings (dimensions)......................................................................................................................................17
Main groups of disposal ...................................................................................................................................18
Label ..................................................................................................................................................................18
Addresses ...........................................................................................................................................................20
3
Preface
We are delighted that you have chosen a product from LINAK. LINAK
systems are high-tech products based on many years of experience in the
manufacture and development of actuators, electronic control boxes,
controls, and chargers. We are also constantly improving our products to
meet customer requirements.
This user manual will tell you how to install, use, and maintain your LINAK
LA36 actuator.
We are sure that the LA36 actuator will give you a problemfree operation.
Before our products leave the factory they undergo full function and quality
testing. Should you nevertheless experience problems with your LINAK pro-
ducts, you are always welcome to contact our service departments or service
centres.
Most LINAK subsidiaries have authorised service centres, which are always
ready to help you.
LINAK provides a warranty on all its products. This warranty, however, is
subject to correct use in accordance with the specifications, maintenance
being done correctly and any repairs being carried out at a service centre,
which is authorised to repair LINAK products.
LINAK A/S
4
Safety instructions
Please read the following safety information carefully
.
Ensure that all staff who are to connect, mount, or use the actuator are in
possession of the necessary information and that they have access to this user
manual.
Persons who do not have the necessary experience or knowledge of the
product/products must not use the product/ products. Besides, persons with
reduced physical or mental abilities must not use the product/products,
unless they are under surveillance or they have been thoroughly instructed
in the use of the apparatus by a person who is responsible for the safety of
these persons.
Moreover, children must be under surveillance to ensure that they do not
play with the product.
Before you start mounting/dismounting, ensur
are observed:
e that the following points
• The actuator is not in operation.
• The mains current supply is switched of
f and the plug has been pulled out.
• The actuator is free from loads that could be released during this work.
Before you put the actuator into operation, check the following:
• The actuator is correctly mounted as indicated in the relevant user instructions.
• The equipment can be freely moved over the actuator’
area.
s whole working
• The actuator is connected to a mains electricity supply/transformer with
the correct voltage and which is dimensioned and adapted to the actuator
in question.
During operation
• Listen for unusual sounds and watch out for uneven running. Stop the
actuator immediately if anything unusual is observed.
When the equipment is not in use
• Switch off the mains supply or pull out the plug in order to prevent
unintentional operation.
Classification
The equipment is not suitable for use in the presence of a flammable
anaesthetic mixture with air or with oxygen or nitrous oxide.
5
Important information
Information about the actuators is described under the following two
headings:
Warning!
Failing to follow these instructions can cause accidents resulting in
serious personal injury.
Failing to follow these instructions can result in the actuator suffering
damage or being ruined.
6
7
Misc. on the TECHLINETM actuator system
Warranty
There is a 12 months’ warranty on the TECHLINE products against
manufacturing faults calculated from the production date of the individual
products (see label). LINAK’s warranty is only valid in so far as the equipment
has been used and maintained correctly and has not been tampered with.
Furthermore, the actuator must not be exposed to violent treatment. In the
event of this, the warranty will be ineffective/invalid. For further details,
please see LINAK A/S ordinary conditions of sale.
Maintenance
• The actuator must be cleaned at regular intervals to remove dust and
dirt and inspected for mechanical damages or wear.
• Inspect attachment points, wires, piston rod, cabinet, and plug, as well
as check that the actuator functions correctly.
•
•
The actuator is a closed unit and requires no internal maintenance.
To ensure that the pregreased inner tube remains lubricated the actuator
must only be washed down when the piston rod is fully retracted.
Warning!
If irregularities are observed, the actuator must be replaced.
8
Specifications
Motor:
Permanent magnet motor 12, 24, or 36V
Motor protection:
Automatic protection resets thermal overload
Cable:
Motor: 2 x 14 AWG PVC cable
Control: 6 x 20 AWG PVC cable
Gear ratio:
Slip clutch:
Brake:
4 different gear ratios available in steel (2600 N/1700 N,
4500 N, and 10,000 N)
Mechanical - overload protection through an integrated
slip clutch is optional adjusted to 1.2-1.4 times max. load
Integrated brake ensures a high self-locking ability.
The brake is deactivated when the actuator is
powered in order to obtain a high efficiency
Hand crank:
Housing:
As a standard feature the actuator can be operated
manually
The housing is made of casted aluminium, coated for
outdoor out and in harsh conditions
Spindle part:
Outer tube: Extended aluminium anodised
Inner tube: Stainless steel AISi304/SS2333
Acme spindle: Trapezoidal spindle with high efficiency
Temperature range: - 30o C to +65o C
- 22o F to +150o F
Full performance +5o C to +40o C
End play:
2 mm maximum
Weather protection: Rated IP 66 for outdoor use. Furthermore the actuator
can be washed down with a high-pressure washer.
9
Mounting guidelines
X
LINAK® linear actuators are quickly
and easily mounted by slipping pins
through the holes on each end of
the units and into brackets on the
machine frame and the load.
The mounting pins must be parallel
to each other as shown in Figure 1.
Pins, which are not parallel to each
other, may cause the actuator to
bind and be damaged.
X
Figure 1
The load should act along the
stroke axis of the actuator since
off centre loads may cause
bending and lead to premature
failure. See Figure 2.
Make sure the mounting pins are
supported in both ends. Failure to
do so could shorten the life of the
actuator. Cantilever mounts are
unacceptable.
WRONG
RIGHT
WRONG
Figure 2
Warning!
If the actuator is used for pull in an application where personal injury
can occur, the following is valid:
It is the application manufacturer’s responsibility to incorporate a
suitable safety arrangement, which will prevent personal injury from
occurring, if the actuator should fail.
Warning!
LINAK’s actuators are not constructed for use within the following
fields:
• Offshore installations
• Aeroplanes and other aircraft
• Explosive environments
• Nuclear power generation
10
Application hints
The actuator is weather proof for use in outdoor applications. The actuator
can be washed down with a high pressure washer, but it should not be used
under water.
Optionally the actuator is overload protected with a slip clutch. The clutch will
slip when the load exceeds approx. 1.2 - 1.4 times the actuators rating.
The duty cycle at max. load is 20% on time. This means if the actuator
runs continuously for 20 seconds it must remain off for 80 seconds before
operating again.
Manual hand crank
The manual hand crank can be used in the case of power failure.
6 mm Allen key
The cover over the Allen key socket must be unscrewed before the Allen
key can be inserted and the Hand Crank operated.
Hand Crank Torque: 6 - 8 Nm ( 2600 N – 6800 N load )
Piston Rod movement per turn
Gear A = 10.5 mm
Gear B = 6.0 mm
Gear C = 4.0 mm
Note: The power supply has to be disconnected during manual
operation.
11
Electrical installation
Motor connection
Wiring: The actuator direction (forward, reverse) is controlled with a
doublethrow switch with the centre postion “off”.
+
Motor
Actuation
To extend the actuator, connect brown to positive and blue to negative.
To retract the actuator, connect blue to positive and brown to negative.
Connections diagram: For 36xxxxx0H/Pxxxxxx and 36xxxxx1H/Pxxxxxx
Power cable
P
C
B
:
0
0
L
A
3
6
M
H
P
-
X
-
X
B
r
o
w
n
+
M
o
t
o
r
P
o
w
e
r
+
/
-
(
o
u
t
/
i
n
)
1
2
V
/
2
4
V
/
3
6
V
B
l
u
e
-
S
i
g
n
a
l
s
O
U
T
1
0
R
e
d
S
u
p
p
l
y
+
1
2
v
t
o
3
6
V
B
A
8
0
m
A
1
0
Y
e
l
l
o
w
H
a
l
l
A
(
E
n
d
I
N
)
5
K
6
1
0
G
r
e
e
n
H
a
l
l
B
(
E
n
d
O
U
T
)
5
K
6
1
0
W
h
i
t
e
+
1
0
V
e
x
i
t
a
t
i
o
n
0
0
1
K
V
i
o
l
e
t
0
-
1
0
V
O
u
t
1
0
K
B
l
a
c
k
G
N
D
Signal cable
12
Connections diagram: For 36xxxxx2Pxxxxxx and 36xxxxx20xxxxxx:
Power cable
P
C
B
:
0
0
L
A
3
6
W
P
E
-
C
-
X
B
r
o
e
w
d
n
+
M
o
t
o
r
P
o
w
e
r
+
/
-
(
o
u
t
/
i
n
)
1
2
V
/
2
4
V
/
3
6
V
B
l
u
e
-
S
i
g
n
a
l
s
O
U
T
R
S
u
p
p
l
y
+
1
2
v
t
o
3
6
V
1
0
8
0
m
A
E
n
d
I
N
1
1
0
0
Y
e
l
l
o
w
E
I
n
d
N
E
O
n
d
E
n
d
O
U
T
G
r
e
e
n
U
T
5
K
6
5
K
6
0
W
h
i
t
t
e
+
1
0
V
e
x
i
t
a
t
i
o
n
0
1
K
V
i
o
l
e
l
0
-
1
0
V
O
u
t
1
0
K
0
B
a
c
k
G
N
D
Note:
If you wish to
use the end-stop
signals, you will
have to keep
power on the
brown and blue
wires, otherwise
the signal will be
lost.
Signal cable
Power cable
Connections diagram: For 36xxxxx2Hxxxxxx
P
C
B
:
0
0
L
A
3
6
M
H
P
-
X
-
X
B
r
o
e
w
d
n
+
M
o
t
o
r
P
o
w
e
r
+
/
-
(
o
u
t
/
i
n
)
1
2
V
/
2
4
V
/
3
6
V
B
l
u
e
-
S
i
g
n
a
l
s
O
U
T
1
0
R
S
u
p
p
l
y
+
1
2
v
t
o
3
6
V
B
A
8
0
m
A
1
0
Y
e
l
l
o
w
H
a
l
l
A
(
E
n
d
I
N
)
5
K
6
1
0
G
r
e
e
n
H
a
l
l
B
(
E
n
d
O
U
T
)
5
K
6
1
0
W
h
i
t
e
+
1
0
V
e
x
i
t
a
t
i
o
n
0
0
1
K
V
i
o
l
e
t
0
-
1
0
V
O
u
t
1
0
K
B
l
a
c
k
G
N
D
Signal cable
13
Connections diagram: For 36xxxxx3xxxxBxx + 36xxxxx40xxxBxx:
Power cable
P
C
B
:
0
0
N
C
S
3
6
-
X
-
0
B
r
o
w
n
+
E
D
E
N
D
M
o
t
o
r
P
o
w
e
r
2
4
V
/
3
6
V
B
l
u
e
-
S
i
g
n
a
l
s
O
U
T
1
0
R
e
d
S
u
p
p
l
y
+
1
2
v
t
o
2
4
V
I
N
O
U
T
8
0
m
A
B
A
1
0
Y
e
l
l
o
w
H
a
l
l
A
(
E
n
d
I
N
)
5
K
6
1
0
G
r
e
e
n
H
a
l
l
B
(
E
n
d
O
U
T
)
5
K
6
1
1
K
K
O
U
T
W
h
i
t
e
7
4
V
V
I
N
V
i
o
l
e
t
7
4
V
V
5
K
6
5
K
6
B
l
a
c
k
G
N
D
Signal cable
14
Connection of the LA36 with the CS16
MAX MIN
P
HB40 serie
CS16-4-24
1
2
3
4
5
6
7
8
9
10 11 12
R GR O
R = RED . O = ORANGE . GR = GREEN
-
+
Troubleshooting
Possible cause
Symptom
Action
• The actuator is not connected
to the power supply
No motor sound or
movement of piston rod
• Connect the actuator to the
power supply
• Cable damaged
• Change cable
• Send actuator for repair
• Misalignment or overload in
application
• Align or reduce load
• Send actuator for repair
Excessive electricity
consumption
• Gearwheel or spindle
damaged
Motor runs but spindle
does not move
• Send actuator for repair
• Send actuator for repair
• Clutch is worn
• Motor is damaged
Actuator cannot lift full
load
• Cable damaged
• Change cable
No signal from
• Potentiometer damaged
• Send actuator for repair
potentiometer or hall
effect sensor
• Increase power supply
• Thicker cable
• Insufficient power supply
• Voltage drop in cable
Motor runs too slowly or
does not give full force
Actuator cannot hold the
chosen load
• Reduce load
• Load is higher than specified
15
Mounting of cables
TORX 25IP
• Unscrew the cover and remove the two blind plugs
• Plug in the power cable and/or the signal cable
• Slide the cover onto the actuator.
The torque of the cover screw is +/- 0.3 Nm
Accessories
Cables:
Power cables (Ordered separately) Order no.
1.5 m cable
5 m
0.2 m cable (AMP connectors)
0367002-1500
0367002-5000
0367006
Signal cable (Ordered separately)
Order no.
1.5 m cable
5 m
0367003-1500
0367003-5000
16
DRAWING APPENDIX
TM
TECHLINE LA36:
LA36
STROKE <= 300
STROKE => 300
=
=
200
250
+
+
STROKE
STROKE
02= Turned 90˚
01= Standard
LA36 with adapter
STROKE <= 300
STROKE => 300
=
=
188
238
+
+
STROKE
STROKE
17
Main groups of disposal
Product
LA36
Metal scrap
X
Cable scrap
X
Electronic scrap Plastic recycling or
combustion
X
X
LINAK’s products may be disposed of, possibly by dividing them into different
waste groups for recycling or combustion.
We recommend that our product is disassembled as much as possible at the
disposal and that you try to recycle it. As examples of main groups within
sorting of waste we can mention the following:
Metal scrap
Plastic scrap
Cable scrap
Combustible material and collection for recoverable resources.
Some of these main groups can be sub-divided into groups e.g. metal can be
divided into steel and aluminium or plastic can be divided into ABS and PP.
Label for LA36
18
LINAK APPLICATION POLICY
The purpose of the application policy is to define areas of responsibilities
in relation to applying a LINAK product defined as hardware, software,
technical advice, etc. related to an existing or new customer application.
LINAK products as defined above are applicable for a wide range of
applications within the Medical, Furniture, Desk, and Industry areas. Yet,
LINAK cannot know all the conditions under which LINAK products will be
installed, used, and operated, as each individual application is unique.
The suitability and functionality of the LINAK product and its performance
under varying conditions (application, vibration, load, humidity,
temperature, frequency, etc.) can only be verified by testing, and shall
ultimately be the responsibility of the LINAK customer using any LINAK
product.
LINAK shall be responsible solely that the LINAK products comply with the
specifications set out by LINAK and it shall be the responsibility of the LINAK
customer to ensure that the specific LINAK product can be used for the
application in question.
19
FACTORIES
INDONESIA
NORWAY
CHINA
PT. HIMALAYA EVEREST JAYA
Phone: +6 221 544 8956/65 Fax: +6 221 619 4658/1925
E-mail: [email protected]
LINAK Norge AS
Phone: +47 32 82 90 90 Fax: +47 32 82 90 98
LINAK (Shenzhen) Actuator Systems, Ltd.
.
.
.
Phone: +86 755 8610 6656 Fax: +86 755 8610 6990
.
.
IRAN
Bod Inc.
POLAND
LINAK Polska
DENMARK
LINAK A/S Group Headquarters Guderup
Phone: +45 73 15 15 15 Fax: +45 74 45 80 48
Fax (Sales): +45 73 15 16 13
.
.
.
.
Phone: +98 21 88527255 Fax: +98 21 88514037
Phone: +48 (22) 500 28 74 Fax: +48 (22) 500 28 75
.
.
.
MEXICO
SPAIN
ILSA S.A. de C.V.
Phone: +[52] (55) 5388-3960 Fax: +[52] (55) 5388-3966
LINAK Actuadores S.L.
Phone: +34 93 588 27 77 Fax: +34 93 588 27 85
SLOVAKIA
LINAK Slovakia s.r.o.
Phone: +421 517563 414 Fax: +421 517563 410
.
.
.
.
.
.
RUSSIAN FEDERATION
SWEDEN
000 FAM
LINAK Scandinavia AB
USA
LINAK U.S. Inc.
North and South American Headquarters
Phone: +1 502 253 5595 Fax: +1 502 253 5596
.
.
Phone: +7 812 3319333 Fax: +7 812 3271454
Phone: +46 8 732 20 00 Fax: +46 8 732 20 50
.
.
.
.
SINGAPORE
SERVO DYNAMICS PTE. Ltd.
Phone: +65 6844 0288 Fax: +65 6844 0070
SWITZERLAND
LINAK AG
.
.
Phone: +41 43 388 31 88 Fax: +41 43 388 31 87
.
.
SUBSIDIARIES
AUSTRALIA
LINAK Australia Pty. Ltd
Phone: +61 3 8796 9777 Fax: +61 3 8796 9778
SOUTH KOREA
UNITEK ENG.
Phone: +82 2 567 0888 Fax: +82 2 3453 1177
TAIWAN
LINAK A/S Taiwan Representative Office
Phone: +886 2 25080296 Fax: +886 2 25080296
.
.
.
.
.
.
AUSTRIA
LINAK GmbH
Phone: +43 2746 21036 Fax: +43 2746 21044
UNITED ARAB EMIRATES
Mechatronics
Phone.: +971 4 267 4311 Fax: +971 4 267 4312
E-mail: [email protected]
TURKEY
LINAK A/S Turkey Representative Office
Phone: +90 312 4726338-59 Fax: +90 312 4726635
.
.
.
.
BELGIUM & LUXEMBOURG
LINAK Actuator-Systems NV/SA
Phone: +32 (0)9 230 01 09 Fax: +32 (0)9 230 88 80
UNITED KINGDOM
LINAK UK Limited
Phone: +44(0)121 544 2211 Fax: +44(0)121 544 2552
.
.
.
For contact details on other countries please visit
.
BRAZIL
LINAK do Brasil Comércio de Atuadores Ltda.
LINAK INTERNATIONAL
DISTRIBUTORS
ARGENTINA
NOVOTEC ARGENTINA SRL
.
Phone: +55 (11) 6832-7070 Fax: +55 (11) 6832-7060
Fax: +45 74 45 90 10
.
.
.
Phone: +[54] (11) 4303-8900/89 Fax: +[54] (11) 4032-0184
CANADA
E-mail: [email protected]
LINAK Canada Inc.
Phone: +1 905 821 7727 Fax: +1 905 821 4281
.
.
COLOMBIA
MEM Ltda
CZECH REPUBLIC
LINAK C&S S.R.O.
Phone: +420581741814 Fax: +420581702452
.
Phone: +[57] (1) 334-7666 Fax: +[57] (1) 282-1684
E-mail: [email protected]
.
.
ESTONIA
DENMARK
TECHTRADE OÜ
Phone: + 372 50 67040
LINAK DANMARK A/S
Phone: +45 86 80 36 11 Fax: +45 86 82 90 51
.
.
.
FINLAND
LINAK OY
.
Phone: +358 9 8700 130 Fax: +358 9 8700 1355
.
FRANCE
LINAK FRANCE S.A.R.L
.
Phone: +33 (0)2 4136 3434 Fax: +33 (0)2 4136 3500
.
GERMANY
LINAK GmbH
Phone: +49 6043 9655 0 Fax: +49 6043 9655 60
.
.
INDIA
LINAK A/S India Liaison Office
.
Phone: +91 80 2212 0015 Fax: +91 80 2207 2186
.
IRELAND
LINAK UK Limited
Phone: +44(0)121 544 2211 Fax: +44(0)121 544 2552
.
.
The user is responsible for determining the suitability of LINAK
products for a specific application.
ITALY
LINAK ITALIA S.r.l.
Phone: +39 02 48 46 33 66 Fax: +39 02 48 46 82 52
LINAK A/S takes great care in providing accurate and up-to-
date information on its products. However, due to continuing
developments in order to improve its products, LINAK products
are subject to frequent modifications and changes without prior
notice. Therefore, LINAK cannot guarantee the correct and actual
status of said information on its products. While LINAK uses its
best efforts to fulfil orders, LINAK cannot, for the same reasons
as mentioned above, guarantee the availability of any particular
product. Therefore, LINAK reserves the right to discontinue
the sale of any product displayed on its website or listed in its
catalogues or other written material drawn up by LINAK.
.
.
JAPAN
LINAK K.K.
.
Phone: +81 45 533 0802 Fax: +81 45 533 0803
.
MALAYSIA
LINAK A/S Asian Representative Office
Phone: +60 4 210 6500 Fax: +60 4 226 8901
.
All sales are subject to the Standard Terms of Sale and Delivery
for LINAK A/S. For a copy hereof, please contact LINAK.
.
NETHERLANDS
LINAK Actuator-Systems B.V.
.
Phone: +31 76 5 42 44 40 Fax: +31 76 5 42 61 10
.
NEW ZEALAND
LINAK New Zealand Ltd.
.
Phone: +64 9580 2071 Fax: +64 9580 2072
.
|