Item #1000 018 755
Model #L-GZ680PST-M
USE AND CARE GUIDE
HARPER GAZEBO 10 FT. X 10 FT.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Hampton Bay!
Pre-Assembly
PLANNING INSTALLATION
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
EE
BB
FF
CC
DD
GG
HH
II
Part
AA
BB
CC
DD
EE
Description
M6X15 bolt
Quantity
80
276
116
16
16
16
32
16
2
M6 flat washer
M6X15 screw
M6X60 screw
M6 nut
FF
M6X40 screw
M6X40 bolt
GG
HH
II
Dia.8X250 stake
M6 wrench
3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
PACKAGE CONTENTS
A
B
J2
J3
J4
C
D1
J5
K
D2
L
E
F
M1
M2
H
G
I1
I2
N1
N2
I3
I4
O
J1
4
Q
T
R
P
U
S
Part
Description
Quantity
Part
Description
Quantity
A
Post
4
J3
Middle cover
4
B
C
Cover
Stake base
Decorative groove
Corner part
Support
4
4
4
4
8
4
4
4
4
4
4
4
4
4
J4
J5
K
Right middle cover
Right small cover
Coping
4
4
4
8
4
4
4
4
4
4
4
1
1
1
1
D1
D2
E
L
Decorative connector
Cover tablet 1
Cover tablet 2
Top connector
Top beam
M1
M2
N1
N2
O
F
Long beam
Connector
G
H
Middle beam
Beam 1
I1
I2
I3
I4
J1
J2
Small roof beam
Small roof cover
Small roof board
Small roof connector
Small roof cap
Finial
Beam 2
P
Beam 3
Q
Beam 4
R
Left small cover
Left middle cover
S
T
U
Hook
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
Attaching the decorative
connector
Insert the decorative connector (L) into the decorative groove
(D1) and corner part (D2). Then use bolts (AA) and flat washers
(BB) to secure.
Attaching the top connector to the
top beam
Attaching the top connector (N1) to the top beam (N2) using
screw (CC) and flat washers (BB).
1
2
□
□
NOTE: To avoid destroying the finish, please handle it with
care
NOTE: To avoid destroying the finish, please handle it with
care.
Attaching the beams
Securing the beams to the frame
3
4
□
Insert the long beam (F) to the beam connector and secure using
screws (DD), flat washers (BB) and nuts (EE).
□
Secure the long beams (F) to the top connectors (N1) using bolts
(AA) and flat washers (BB).
NOTE: To avoid destroying the finish, please handle it with
care.
NOTE: To avoid destroying the finish, please handle it with
care.
6
Assembly (continued)
Securing the middle beam to the
connector
Secure the middle beams (H) to the connectors (G) using
screws (DD), flat washers (BB), and nuts (EE).
Securing the connectors
5
6
□
Secure the connector (G) to the decorative groove (D1) using
bolts (AA) and flat washers (BB).
□
NOTE: To avoid destroying the finish, please handle it with
care.
NOTE: To avoid destroying the finish, please handle it with
care
Securing the middle beam to the
frame
Securing the beams to the long
beams
7
8
□
Use bolts (AA) and flat washers (BB) to secure the middle beam
(H) to the frame (N).
□
Secure the beam 1 (I1) and beam 3 (I3) to beams (F) using
screws (CC) and flat washers (BB). Repeat this step for beam
2 (I2) and beam 4 (I4).
7
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
Securing the beams to the middle
beams
Secure the other end of beam 1 (I1) and beam 3 (I3) to the middle
beam (H) using a screw (CC) and flat washer (BB). Repeat this
step for beam 2 (I2) and beam 4 (I4).
Attaching the small roof beams
to the connector
Attach the small roof beams (O) to the small roof connector
(R) using screws (DD), flat washers (BB), and nuts (EE). Then
install the hook (U) to the small roof connector (R).
9
10
□
□
Attaching the small roof beams to
the frame
Securing the small roof cover to
the small roof beam
11
12
□
Attach the small roof beams (O) to the frame (N) using screws
(CC) and flat washer (BB).
□
Secure the small roof covers (P) to the small roof beams (O)
using screws (CC) and flat washers (BB).
8
Assembly (continued)
Attaching the small roof boards
and covers to the roof beam
Attach the small roof boards (Q) to the small roof
covers (P) and secure them to the small roof beams (O) using
screws (FF) and flat washers (BB).
Attaching the small roof cap
and finial
13
14
Attach the small roof cap (S) to the small roof assembly.
Attach the finial (T) to the top of the small roof cap (S).
□
□
Attaching the left small and
middle covers
Attach the left middle covers (J2) to the left small
covers (J1) as shown.
Securing the left middle and
15
16
Attaching the left middle covers (J2) and the left small
covers (J1) to beam.
left small covers
□
□
9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
Attaching the right middle cover
to the right small cover
Attaching the right middle covers
17
18
right middle cover (J4) and right small cover (J5) to the beam.
□
Attach the middle covers (J3) to the left middle covers (J2).
Attach the right middle covers (J4) to the middle covers (J3).
Attach the right small covers (J5) to right middle covers (J4).
□
Use the screws (CC) and flat washers (BB) to secure the
Attaching the coping to the small
roof beam
Securing the copings to the
beams
19
20
□
Insert one end of the copings (K) to the holes of the small roof
beams (O).
□
Use the screws (FF) and flat washers (BB) to secure the
copings (K) to the beam.
10
Assembly (continued)
Connecting the stake base and
post
Attach the covers (B) to the posts (A) and connect the stake
bases (C) and posts (A) by using the screws (CC) and flat
washer (BB).
Attaching the cover tablets
21
22
□
Use the screws (CC) and flat washers (BB) to install the cover
tablets (M) to the decorative grooves (D1).
□
Connecting the top assembly to
the posts
Raise the top assembly and insert the posts (A) into the cannula
of the decorative grooves (D1). Then connect them using bolts
(AA) and flat washers (BB).
Attaching the supports
23
24
(E) to the corners of the posts (A) and decorative grooves (D1).
□
□
Use the bolts (GG) and flat washers (BB) to install the supports
11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
Securing the gazebo
25
□
Lift the covers (B) and use the stakes (HH) to secure the whole
gazebo to the ground.
12
Care and Cleaning
□
□
□
Before using, clean the gazebo completely with a soft dry towel.
Do not put your gazebo in wet conditions where there is a risk of rust developing.
When not in use, store in a cool, dry area.
13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
|