HITACHI CP X430W User Manual
00CP-S420/CP-X430 03.9.2 0:08 PM ページ 2  
Liquid Crystal Projector  
CP-S420/CP-X430  
CP-S420WA/CP-X430WA/CP-X430W  
USER'S MANUAL  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
BEDIENUNGSANLEITUNG  
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung  
aufmerksam.  
MANUEL D'UTILISATION  
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le  
fonctionnement de l'appareil.  
MANUALE D'ISTRUZIONI  
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter  
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.  
MANUAL DE USUARIO  
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el  
producto.  
GEBRUIKSAANWIJIZING  
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te  
hebben van de uitgebreide mogelijkheden.  
BRUKERHÅNDBOK  
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.  
INSTRUÇÕES DO PROPRIETÁRIO  
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do  
usuário.  
TECHNICAL  
REGULATORY NOTICES  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 2  
FEATURES  
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /  
SECAM video signals onto a screen. Little space is required for installation and large images can  
easily be realized.  
Outstanding Brightness  
The UHB lamp and high-efficiency optical system assure a high level of brightness.  
Partial Magnification Function  
Interesting parts of images can be magnified for closer viewing.  
Distortion Correction Function  
Distortion-free images are quickly available.  
Extra-low Noise Function  
Acoustic noise level from the unit can be reduced.  
BEFORE USE  
Contents of Package  
Make sure all of the following items are included in the package. If anything is missing, please  
contact your dealer.  
WARNING • Keep the original packing material for future reshipment. To  
avoid penetration of foreign objects, do not put the projector into a case or  
bag together with anything except the accessories of the projector, signal cables  
and connectors.  
Power Cord  
(UK Type)  
Power Cord  
(Europe Type)  
Power Cord  
(US Type)  
Projector  
(with Lens Cap)  
Liquid Crystal Projector  
CP-S420/CP-X430  
CP-S420WA/CP-X430WA/CP-X430W  
USER'S MANUAL  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
BEDIENUNGSANLEITUNG  
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung  
aufmerksam.  
MANUEL D'UTILISATION  
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le  
fonctionnement de l'appareil.  
MANUALE D'ISTRUZIONI  
Vi preghiamo voler leggere attentamente il manuale d'sitruzioni in modo tale da poter  
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.  
MANUAL DE USUARIO  
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el  
producto.  
GEBRUIKSAANWIJIZING  
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te  
hebben van de uitgebreide mogelijkheden.  
Mouse cable  
(PS/2)  
Component  
Video Cable  
RGB Cable  
BRUKERHÅNDBOK  
Vennligst les denne bruksanvisningen grundig for  
å
være garantert driftssikker bruk.  
INSTRUÇÕES DO PROPRIETÁRIO  
uso correto do equipamento, por favor leia atentamente este manual do  
Para assegurar  
usuário.  
o
TECHNICAL  
REGULATORY NOTICES  
User’s Manual  
(this manual)  
STANDBY/ON  
BLANK  
RGB  
LASER  
VIDEO  
Safety Instructions  
AUTO  
MENU  
KEYSTONE  
MENU SELECT  
POSITION  
RESET  
FREEZE  
OFF  
PinP  
Batteries  
for Remote Control  
Transmitter  
MAGNIFY  
MUTE  
VOLUME  
Remote Control  
Transmitter  
Soft case  
ENGLISH-2  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 3  
BEFORE USE (continued)  
Part Names  
Speaker  
Zoom Knob  
Focus Ring  
Carrying Handle  
Remote Control Sensor  
Lens  
Foot Adjuster  
AC Inlet  
(to the Power Cord)  
Lens Cap  
Power Switch  
Foot Adjuster  
Ventilation Openings  
FRONT/LEFT VIEW OF  
THE PROJECTOR  
(Intake)  
Control Panel (Refer to P.9 "OPERATIONS")  
INPUT Button  
STANDBY/ON Button  
KEYSTONE Button  
LAMP Indicator  
TEMP Indicator  
POWER Indicator  
RESET Button  
MENU Button  
Foot Adjuster Button  
Filter Cover  
Air Filter and Intake  
for the Cooling Fan  
(
)
Ventilation Openings  
(exhaust)  
REAR/RIGHT VIEW OF  
THE PROJECTOR  
Terminal Panel  
(Refer below)  
S-VIDEO Terminal  
Remote Control Sensor  
DVI Terminal (CP-X430 only)  
RGB IN 1 Terminal  
COMPONENT VIDEO  
Y Terminal  
CB/PB Terminal  
CR/PR Terminal  
COMPONENT VIDEO  
DVI  
RGB IN 2 Terminal  
C
R/PR  
C
B/PB  
Y
1
RGB IN  
2
S-VIDEO IN  
VIDEO IN  
AUDIO  
R
L
VIDEO IN Terminal  
AUDIO IN R Terminal  
AUDIO IN L Terminal  
AUDIO IN 1 Terminal  
AUDIO IN 2 Terminal  
AUDIO OUT Terminal  
IN  
AUDIO  
IN  
1
2
AUDIO OUT  
USB  
RGB OUT  
CONTROL  
CONTROL Terminal  
RGB OUT Terminal  
USB Terminal  
TERMINAL PANEL  
ENGLISH-3  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 4  
BEFORE USE (continued)  
Part Names (continued)  
BLANK Button  
STANDBY/ON Button  
VIDEO Button  
Disk Pad  
LASER Button  
RGB Button  
MOUSE / RIGHT Button  
Used to operate the  
mouse shift function and  
left click function.  
Used to click the right  
mouse button.  
KEYSTONE Button  
RESET Button  
AUTO Button  
MENU Button  
Used to click the right  
mouse button.  
MENU SELECT Button  
Used to click the left  
mouse button.  
PinP Button  
FREEZE Button  
MUTE Button  
VOLUME Button  
,
,
,
Button  
Used to operate the  
mouse shift function.  
POSITION Button  
MAGNIFY Button  
REMOTE CONTROL  
TRANSMITTER  
(Refer to P.9 "OPERATIONS")  
These functions work when the mouse control function is activated. Remember, the POSITION,  
BLANK ON and MENU ON functions disable the mouse control function.  
WARNING • The laser pointer of the remote control transmitter is used in  
place of a finger or rod. Never look directly into the laser beam outlet or point  
the laser beam at other people. The laser beam can cause vision problems.  
CAUTION • Use of controls or adjustments or performance of procedures  
other than those specified herein may result in hazardous radiation exposure.  
AVOID EXPOSURE-  
C
A
LASER RADIATION-  
U
T
I
O
N
LASER RADIATIONS IS  
EMITTED FROM THIS  
APERTURE  
DO NOT STARE INTO BEAM  
MAX. OUTPUT: 1mW  
WAVE LENGTH 650nm  
:
CLASS2 LASER PRODUCT  
LASER RADIATION  
DO NOT STARE INTO BEAM  
CLASS2 LASER PRODUCT  
MAX. OUTPUT: 1mW  
WAVE LENGTH: 650nm  
IEC60825-1:1993+A1:1997  
Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations  
pursuant to Laser Notice No.50, dated 2001.7.26  
SMK CORPORATION  
6-5-5 Togoshi Shinagawa-ku, Tokyo, JAPAN 142-8511  
MANUFACTURED Novemver 2001  
PLACE OF MANUFACTURER:  
A
NOTE • Keep the remote control transmitter away from children and pets.  
• Do not give the remote control transmitter any physical impact. Take care not to drop.  
• Do not place the heavy objects on the remote control transmitter.  
• Do not wet the remote control transmitter or place it on any wet object.  
• Do not place the remote control transmitter close to the cooling fan of the projector.  
• Do not disassemble the remote control transmitter.  
ENGLISH-4  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 5  
BEFORE USE (continued)  
Loading the Batteries  
Install the AA batteries into the remote control  
transmitter.  
1. Remove the battery cover.  
Push the knob while lifting up the battery cover.  
2. Load the batteries.  
Make sure the plus and minus poles are correctly  
oriented.  
1
2
3. Close the battery cover.  
CAUTION • Use only the specified batteries with this remote control  
transmitter. Also, do not mix new and old batteries. This could cause battery  
cracking or leakage, which could result in fire or personal injury.  
• When loading the batteries, make sure the plus and minus terminals are  
correctly oriented as indicated in the remote control transmitter. Incorrect  
orientation could cause battery cracking or leakage, which could result in  
personal injury or pollution of the surrounding environment.  
• When you dispose the battery, you should obey the law in the relative area or  
country.  
• Keep the battery away from children and pets.  
• When not to be used for an extended period, remove the batteries from the  
remote control transmitter.  
NOTE Replace the batteries when remote control transmitter operation becomes difficult.  
ENGLISH-5  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 6  
INSTALLATION  
Installation of the Projector and Screen  
Refer to the drawing and table below for determining the screen size and projection distance.  
The projection distances shown in the table below are for full  
size (CP-S420:800 x 600 pixels , CP-X430:1024 x 768 pixels).  
a: Distance from the projector to the screen. ( 10%)  
Table 1. Installation Reference  
a [inches (m)]  
Screen size  
[inches (m)]  
Min.  
Max.  
Top View  
40 (1.0)  
60 (1.5)  
62 (1.6)  
94 (2.4)  
82 (2.1)  
123 (3.1)  
164 (4.2)  
205 (5.2)  
246 (6.3)  
308 (7.8)  
411 (10.4)  
80 (2.0)  
127 (3.2)  
160 (4.1)  
192 (4.9)  
241 (6.1)  
323 (8.2)  
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.0)  
a
Side View  
CAUTION • Install the projector in a suitable environment according to instructions of  
the accompanying manual “SAFETY INSTRUCTIONS” and this manual.  
• When you fix this unit with a metal tool and the like, you must connect it with ground  
wire; otherwise, fire or electric shock can result.  
Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the  
building using an optional three-core power-supply cord.  
• Please basically use liquid crystal projector at the horizontal position. If you use liquid  
crystal projector by the lens up position, the lens down position and the side up position, this  
may cause the heat inside to build up and cause damage. Be especially careful not to install it  
with ventilation holes blocked.  
• Do not install LCD projector in smoke effected environment. Smoke residue may buildup  
on critical parts (i.e.LCD panel, Lens Assy etc.).  
Angle Adjustment  
Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable  
within 0˚ to 9˚ approximately.  
Press the foot  
Foot Adjusters  
adjuster button  
1. Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection  
angle.  
2. Release the button to lock at the desired angle.  
3. Use the foot adjusters for fine adjustment. Do not force the adjuster screws. This could damage  
the adjusters or cause the lock to fail.  
CAUTION • Do not release the foot adjuster button unless the projector is being held;  
otherwise, the projector could overturn or fingers could get caught and cause personal  
injury.  
ENGLISH-6  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 7  
INSTALLATION (continued)  
Cabling  
Refer to the table below for connecting each terminal of the projector to a device.  
Table 2. Cabling  
Function  
Terminal  
Cable  
RGB IN 1  
RGB IN 2  
RGB OUT  
DVI  
RGB input  
RGB cable with D-sub 15-pin shrink jack  
and inch thread screws  
RGB output  
DVI input (CP-X430 only)  
DVI cable with inch thread screws  
Audio cable with stereo mini jack  
AUDIO IN 1  
(interlocked with RGB IN 1 or DVI)  
Audio input  
(from the computer)  
AUDIO IN 2  
(interlocked with RGB IN 2)  
PS/2 mouse control  
ADB mouse control  
Serial mouse control  
RS-232C communication  
USB mouse control  
S-video input  
PS/2 mouse cable  
ADB mouse cable  
Serial mouse cable  
RS-232C cable  
CONTROL  
USB  
USB cable  
S-VIDEO IN  
S-video cable with mini DIN 4-pin jack  
Video/Audio cable  
Video input  
VIDEO IN  
COMPONENT VIDEO Y  
COMPONENT VIDEO CB/PB  
COMPONENT VIDEO CR/PR  
AUDIO IN L  
Component video input  
Component Video cable  
Audio input  
Video/Audio cable  
(from video equipment)  
or Audio cable with RCA jack  
AUDIO IN R  
Audio output  
AUDIO OUT  
Audio cable with stereo mini jack  
CAUTION • Incorrect connecting could result in fire or electrical shock.  
Please read this manual and the separate “SAFETY INSTRUCTIONS”.  
• Before connecting, turn off to all devices to be connected, except for the USB  
cable.  
• The cables may have to be used with the core set to the projector side. Use the  
cables which are included with the projector or specified.  
NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the  
projector is compatible with the device.  
• Secure the screws on the connectors and tighten.  
• For some RGB input modes, the optional Mac adapter is necessary.  
• To select the DVI input, the comuter may need some settings. See the manuals of the computer for details.  
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible  
with this projector.  
• Refer to the “TECHNICAL” section for the pin assignment of connectors and RS-232C communication data.  
• When the DVI terminal is used, the RGB OUT terminal may not function.  
ENGLISH-7  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 8  
INSTALLATION (continued)  
Power Connection  
Use the correct power cord depending on the power outlet to be used.  
Connect the AC inlet of the projector to the power outlet firmly by the power cord.  
CAUTION • Be carful in handling the power  
cord according to instructions of the  
accompanying manual "SAFETY INSTRUCTIONS"  
and this manual.  
Power  
outlet  
• Connect the power cord firmly. Avoid using a  
loose, unsound outlet or failed contact.  
Power Cord  
AC Inlet  
Example of System Setup  
Display  
Monitor  
COMPONENT VIDEO  
CR/PR CB/PB  
Y
*DVI:CP-X430 only  
DVI  
DVD Player  
1
RGB IN  
2
S-VIDEO IN  
VIDEO IN  
R
L
AUDIO  
IN  
AUDIO 1  
IN  
2
AUDIO OUT  
USB  
RGB OUT  
CONTROL  
S-Video Tape  
Recorder  
Computer  
(notebook type)  
Speaker with  
amplifier  
Computer  
(desktop type)  
NOTE • When connecting with a notebook computer, set the proper RGB external image output  
(setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of  
the notebook for more information.  
Plug & Play  
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer  
that is VESA DDC (Display Data Channel) compatible.  
Please use this function by connecting the RGB cable with RGB IN 1 terminal (DDC 1/2B  
compatible), or by connecting a DVI cable with DVI terminal (CP-X430 only/DDC 2B  
compatible). Plug & play may not operate by other connections.  
NOTE • Plug & play is a system configured with peripheral equipment including a computer,  
display and an operating system.  
• This projector is recognized as a plug & play monitor. Use the standard display drivers.  
• Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug &  
play does not operate correctly.  
ENGLISH-8  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 9  
OPERATIONS  
BLANK  
RGB  
STANDBY/ON  
VIDEO  
STANDBY/  
ON Button  
LASER  
STANDBY/ON Button  
POWER Indicator  
Zoom Knob  
Focus Ring  
AUTO  
MENU  
KEYSTONE  
MENU SELECT  
RESET  
POSITION  
FREEZE  
OFF  
PinP  
Power Switch  
MAGNIFY  
MUTE  
Lens Cap  
Power ON  
1. Check that the power cord is connected correctly.  
2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to  
orange.  
3. Press the STANDBY/ON button  
on the control panel or the remote control transmitter.  
Warm-up begins and the POWER indicator blinks in green.  
4. The POWER indicator ceases blinking and turns to green when power is on. Remove the lens  
cap.  
5. Adjust picture size using the zoom knob.  
6. Adjust focus using the focus ring .  
Power OFF  
1. Press the STANDBY/ON button  
on the control panel or the remote controller. Then,the  
message "Power off?" will appear on the screen, and the message will disappear by any operation  
or no operation for 5 seconds. During this message indication, press the STANDBY/ON  
button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator  
blinks orange during lamp cooling. Pressing the STANDBY/ON button  
the POWER indicator is blinking.  
has no effect while  
2. The system assumes the Standby mode when cooling is complete, and the POWER indicator  
ceases blinking and changes to orange. Check that the indicator is orange and set the power  
switch to [O].  
3. The POWER indicator is extinguished when power is off. Do not forget to attach the lens cap.  
WARNING • Please read this manual, and the separate “SAFETY  
INSTRUCTIONS” thoroughly before using the equipment. Always ensure that  
the equipment is used safely.  
NOTE • Except in emergencies, follow the above-mentioned procedure for turning power off. If the  
projector is used improperly, it may very difficult to turn off the projector caused by heating inside the  
unit. And the reduction of life time of lamp and LCD panels will be caused by incorrect procedure.  
• To prevent any trouble, turn on/off the projector when the computer or video tape recorder is OFF.  
Providing a RS-232C cable is connected, turn on the computer before the projector.  
• When a projector continues projecting the same image, the image may remain as an afterimage.  
Please do not project the image same for a long time.  
ENGLISH-9  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 10  
OPERATIONS (continued)  
Basic Operation  
The basic operations shown in Table 3 is performed from the supplied remote control transmitter or  
the projector control panel. Items indicated by (*) may be used from the control panel.  
Table 3 . Basic Operation  
Item  
Description  
Select Input Signal (*) : Press the INPUT button.  
RGB IN 1→RGB IN 2→DVI→ VIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ RGB IN 1)  
Select RGB Input : Press the RGB button.  
VIDEO IN / S-VIDEO IN / COMPONENT VIDEO → RGB IN 1 / RGB IN 2 / DVI  
RGB IN 1 → RGB IN 2 → DVI (→ RGB IN 1)  
Select Video Input : Press the VIDEO button.  
RGB IN 1 / RGB IN 2 / DVI → VIDEO IN / S-VIDEO IN / COMPONENT VIDEO  
VIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ VIDEO IN)  
• The selected signal name is displayed for approximately 3 seconds when the input  
signal is changed.  
INPUT  
SELECT  
• Only for CP-X430, DVI exists.  
Set/Clear Position Adjustment Mode : Press the POSITION button.  
The [ ] icon is displayed in the POSITION mode.  
Image Position Adjustment: Press the  
,
,
and  
buttons in the  
POSITION mode.  
• Valid only in the MAGNIFY mode with a video signal is input.  
POSITION  
• After approximately 10 seconds of inactivity the [ ] icon is extinguished and the  
POSITION mode is cleared automatically.  
•
,
,
and  
buttons may operate as the mouse control button. Refer to page 4.  
Initialize Each Item : Select an item and press the RESET button.  
Initialize Position Adjustment : Press the RESET button and the  
POSITION mode. This function is valid only when RGB signal is input.  
• Valid except for the VOLUME, LANGUAGE and H PHASE.  
RESET (*)  
• The RESET button may operate as the mouse control button. Refer to page 4.  
Set MAGNIFY Mode : Press the MAGNIFY  
button.  
Move Magnified Area : Run the POSITION in the MAGNIFY mode.  
Adjust Magnification : Press the MAGNIFY  
mode.  
Clear MAGNIFY Mode : Press the MAGNIFY  
• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT  
/
button in MAGNIFY  
MAGNIFY  
OFF  
button.  
SELECT or VIDEO, or by changing the input signal.  
Set/Clear FREEZE Mode : Press the FREEZE button. The [  
II] icon is  
displayed, and the image is frozen, in the FREEZE mode.  
• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,  
Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the  
input signal.  
FREEZE  
• Do not forget to clear frozen static images.  
NOTE • Strong light and obstacles will interfere with operation of the remote control transmitter.  
ENGLISH-10  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 11  
OPERATIONS (continued)  
Items indicated by (*) may be used from the control panel.  
Table 3. Basic Operation (continued)  
Item  
Description  
VOLUME  
Volume Adjustment : Press the VOLUME  
/
button.  
Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the  
MUTE mode.  
MUTE  
AUTO  
Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal  
position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE),  
and horizontal size(H.SIZE) are automatically adjusted. Use with the  
window at maximum size in the application display.  
Automatic Adjustment at Video Input : Press the AUTO button. A signal  
type appropriate for the input signal is selected automatically. Valid only  
when AUTO is set for VIDEO on the menu.  
• This operation requires approximately 10 seconds. It may not function correctly  
with some input signals.  
BLANK  
Set/Clear Blank Mode: Press the BLANK button. No image is displayed in  
ON/OFF  
the Blank mode. The screen color is as set in BLANK on the Image menu.  
Menu Display Start/Stop: Press the MENU button.  
• The menu display is terminated automatically after approximately 10 seconds of  
inactivity.  
MENU  
ON/OFF (*)  
Select Menu Type: Press the MENU SELECT button. Allows the user to  
select the normal menu or the single menu. Only the selected item is  
displayed on the single menu, and other items are displayed with the  
and  
buttons as with the normal menu.  
• Valid only when the Setup menu is used. Push the MENU SELECT button after  
selecting items such as "BRIGHTNESS".  
• The MENU SELECT button may operate as the mouse control button. Refer to  
page 4.  
MENU  
SELECT  
Normal menu  
Single menu  
(MENU SELECT)  
SETUP  
INPUT  
IMAGE  
OPT.  
BRIGHT  
CONTRAST  
0
-2  
V
H
H
POSIT  
POSIT  
PHASE  
100  
100  
+1  
H
SIZE  
800  
COLOR BAL  
COLOR BAL  
ASPECT  
R
B
0
0
CONTRAST  
-2  
Select Mode of P.IN P. Display : Press the PinP button.  
Small → Large → P.IN P. off ( → Small)  
• P.IN P. function superimposes a video image over RGB or DVI signals.  
P.IN P.  
MODE  
Set / Clear KEYSTONE Mode (*) : Press the KEYSTONE  
Select KEYSTONE Mode : Press the button in the KEYSTONE  
mode. Vertical Horizontal  
Adjust KEYSTONE : Press the  
button.  
/
↔
KEYSTONE  
/
button.  
• The image may not be appeared properly when this function is activated on same  
input signals.  
• The adjustable range of distortion correction will be different among input signals.  
ENGLISH-11  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 12  
OPERATIONS (continued)  
SETUP  
BRIGHT  
CONTRAST  
SHARPNESS  
COLOR  
TINT  
H PHASE  
COLOR BAL  
COLOR BAL  
ASPECT  
INPUT  
IMAGE  
OPT.  
0
+1  
+1  
0
0
0
0
0
SETUP  
INPUT  
IMAGE  
OPT.  
Setup Menu  
0
-2  
BRIGHT  
CONTRAST  
V POSIT  
H POSIT  
H PHASE  
The following adjustments and settings are possible  
when SETUP is selected at the top of the menu. Part  
of the Setup menu differs between RGB input and  
100  
100  
+1  
H SIZE  
800  
R
B
0
0
COLOR BAL R  
COLOR BAL B  
ASPECT  
video input. Select an item with the  
and  
buttons, and start operation. Use the Single menu to  
reduce menu size (see Table 3, MENU SELECT).  
RGB IN 1  
RGB IN 2  
VIDEO  
S-VIDEO  
DVI (CP-X430 only)  
COMPONENT VIDEO  
Table 4. Setup Menu  
DVI  
(CP-  
RGB IN 2 X430  
only)  
VIDEO  
S-VIDEO  
COMPONENT  
RGB IN 1  
Item  
Description  
✔
✔
✔
✔
✔
✔
-
✔
✔
-
BRIGHT  
Adjustment: Dark  
Adjustment: Weak  
Adjustment: Down  
Adjustment: Left  
Adjustment: Left  
↔ Light  
↔ Strong  
↔ Up  
CONTRAST  
V POSIT  
H POSIT  
↔ Right  
↔ Right  
-
-
✔
✔
✔
H PHASE  
H SIZE  
-
• Adjust to eliminate flicker.  
Adjustment: Small ↔ Large  
• The image may not be displayed correctly if the horizontal  
size is excessive. In such cases, press the RESET button,  
and initialize the horizontal size.  
-
-
✔
✔
SHARPNESS  
COLOR  
Adjustment: Soft  
Adjustment: Light  
Adjustment: Red  
↔ Clear  
↔ Dark  
↔ Green  
-
-
-
-
✔
TINT  
-
-
• Valid only when NTSC or NTSC 4.43 signal is received.  
✔
✔
✔
✔
✔
✔
COLOR BAL R  
COLOR BAL B  
Adjustment: Light  
↔ Dark  
Adjustment: Light  
↔ Dark  
Select Image Aspect Ratio :  
Full [ 16:9[  
Select Position of Image:  
]
↔
]
✔
✔
-
Press the  
button while 16:9[  
] is selected.  
Center →  
Down →  
Up ( → Center )  
Select Image Aspect Ratio:  
4:3[ 16:9[  
Select Position of Image :  
]
↔
]
↔
4:3 small[  
]
]
ASPECT  
Press the  
is selected.  
Center →  
button while 16:9[  
] / 4:3 small[  
✔
-
-
Down →  
Up ( → Center  
)
• 4:3 small cannot be selected with the input of 720p or  
1080i component.  
• 4:3 small may not be displayed correctly with some input  
signals.  
ENGLISH-12  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 13  
OPERATIONS (continued)  
Input Menu  
menu. Select an item with the  
operation with the and  
SETUP  
AUTO  
RGB  
VIDEO  
HDTV  
INPUT  
IMAGE  
OPT.  
The following functions are available when INPUT is selected on the  
EXECUTE  
CANCEL  
and  
buttons, and start or stop  
buttons. The function indicated (**) are  
effective on video input mode only, not on RGB input mode, except in  
the P.IN P. window on RGB input mode.  
Table 5. Input Menu  
Item  
Description  
Automatic Adjustment at RGB Input: Select the EXECUTE with the  
button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock  
phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.  
Use with the window at maximum size in the application display.  
Automatic Adjustment at Video Input: Select the EXECUTE with the  
button. A signal type appropriate for the input signal is selected  
automatically when EXECUTE is selected automatically. Valid only when  
AUTO is set for VIDEO on the menu.  
AUTO  
•
This operation requires approximately 10 seconds. It may not function correctly with  
some input signals. Pressing the AUTO button in this case may correct this problem.  
• This function is the same as for the AUTO function in Basic operation.  
Displays RGB Input Frequency: Displays the horizontal and vertical sync  
signal frequencies for RGB input.  
RGB  
• Valid only at RGB input.  
Select Video Signal Type: Select the signal type with the  
and  
buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as  
appropriate for the input signal. The selection of AUTO enables and  
executes the function AUTO (Automatic Adjustment at Video Input), except  
for the N-PAL input.  
• Use this function when the image becomes unstable (eg. the image becomes  
VIDEO (**) irregular, or lacks color) at VIDEO/S-VIDEO input.  
• Automatic Adjustment requires approximately 10 seconds. It may not function  
correctly with some input signals. Pressing the AUTO button in this case may correct  
this problem except for the N-PAL input.  
• For the COMPONENT VIDEO input, this function is not effective and the signal  
type is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the  
signal of HDTV.  
Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the  
HDTV  
input signal with the  
/
button.  
ENGLISH-13  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 14  
OPERATIONS (continued)  
Image Menu  
SETUP  
BLANK  
START UP  
MyScreen  
INPUT  
IMAGE  
OPT.  
MyScreen  
ORIGINAL  
The following adjustments and settings are available when IMAGE is  
selected on the menu. Select an item with the  
start or stop operation with the  
and  
buttons, and  
MIRROR  
P. IN P. POSIT  
P. IN P. INPUT  
GAMMA  
and  
buttons.  
Table 6. Image Menu  
Item  
Description  
Select Blank Screen: Select the screen in case of the BLANK mode with the  
/
button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the  
BLANK mode is ON.  
BLANK  
MyScreen is a mode that the customer-customized screen is displayed. This is the  
blue screen at the factory setting. Refer to the description of MyScreen below.  
ORIGINAL is a mode that the factory fixed screen is displayed.  
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.  
Select Start Up Screen: Select the screen in case of no signal input with the  
/
button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when  
no signal is input.  
My Screen is a mode that the customer-customized screen is displayed. This is the  
blue screen at the factory setting. Refer to the description of MyScreen below.  
ORIGINAL is a mode that the factory fixed screen is displayed.  
TURN OFF displays the blue screen.  
START UP  
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.  
Set MyScreen Mode: Select the EXECUTE with the  
button to display the  
MyScreen menu and set the MyScreen mode for BLANK and START UP functions.  
ESC clears and closes the menu box.  
NORM. is default of the MyScreen menu.  
FREEZE freezes the image and displays the frame to capture.  
Press the  
button after freeze to go to the MyScreen Capture Position mode.  
In the MyScreen Capture Position mode, the buttons  
move the frame to capture.  
,
,
and  
allow to  
After adjusting the position, press the KEYSTONE button to go to the MyScreen  
Display Size mode.  
MyScreen  
To cancel freezing and return to the NORM. of the MyScreen menu, press the  
RESET button.  
In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with  
the button  
/
. After selecting the magnification, press the KEYSTONE button to  
go to the CAPT. mode and start capturing.  
To return to the MyScreen Capture Position mode, press the RESET button.  
CAPT. executes a capturing the image. It requires about 20 seconds. After capturing,  
the captured image will be displayed for about 10 seconds.  
MIRROR  
Select Mirror Status: Select mirror status with  
/
button.  
button.  
Select Position of P. in P. Display : Press the  
or  
P. IN P.  
POSIT  
↔
↔
↔
• P.IN P. function superimposes a video image over RGB or DVI signals.  
Select signal of P. in P. Display : Press the or button.  
VIDEO S-VIDEO  
Select Gamma Mode: Select the gamma mode with the  
NORMAL CINEMA DYNAMIC  
P. IN P.  
INPUT  
↔
/
button.  
GAMMA  
↔
↔
ENGLISH-14  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 15  
OPERATIONS (continued)  
Options Menu  
SETUP  
VOLUME  
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
INPUT  
IMAGE  
OPT.  
16  
The following adjustments and settings are available when OPT. is  
selected on the menu. Select an item with the  
start or stop operation with the  
and  
buttons, and  
and  
buttons.  
IR REMOTE  
Table 7. Options Menu  
Item  
Description  
VOLUME  
Reduce  
↔
Increase  
MENU COLOR Select Menu Background Color: Select with the  
/
/
button.  
button.  
LANGUAGE  
Select Menu Display Language: Select with the  
Set AUTO OFF: Set 1~99 minutes with the  
/
button. The system  
automatically enters the standby mode when a signal is not received for  
the set time.  
AUTO OFF  
Clear AUTO OFF: Select STOP (0 min.) with the  
button. When  
STOP is selected the system does not enter the standby mode even if  
no signal is received.  
SYNC ON G Valid: Select TURN ON with the  
button.  
SYNC ON G Invalid: Select TURN OFF with the  
button.  
SYNC ON G  
WHISPER  
• May not be displayed correctly with some input signals when SYNC ON G is  
valid. In such cases, remove the signal connector so that no signal is received,  
set SYNC ON G to invalid, and reconnect the signal.  
Set / Crear WHISPER Mode: Press the  
/
button. When the  
WHISPER is selected, the WHISPER mode is active. In the WHISPER  
mode, acoustic noise level from the unit is reduced, and brightness level  
on screen is a little lower.  
Select Remote Control Sensor: Select the sensors to activate along  
the menu with the  
/
button. Use this function if the remote does  
not work stably. The ambient light may affect the remote.  
• Strong light and obstacles will interfere with operation of the remote control  
transmitter.  
SETUP  
INPUT  
IMAGE  
OPT.  
IR REMOTE  
VOLUME  
2
3
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
1
1
2
3
: active  
: inactive  
IR REMOTE  
ENGLISH-15  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 16  
OPERATIONS (continued)  
No Signal Menu  
VOLUME  
BLANK  
START UP  
MIRROR  
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
IR REMOTE  
16  
The same adjustments and settings are available with the Image and  
Options menus when the MENU button is pressed during display of the  
“NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE  
ON ***” message while no signal is received.Select an item with the  
and  
buttons, and start or stop operation with the  
and  
buttons.  
Table 8. No Signal Menu  
Item  
Description  
Reduce  
↔
Increase  
• When this function is used, audio input is automatically switched to video. The audio input can  
VOLUME  
BLANK  
be switched by moving the DISK PAD left and right during the display of the volume adjustment  
bar. The volume adjustment bar is displayed by pressing VOLUME  
/
button.  
Select Blank Screen: Select the screen in case of the BLANK mode with the  
/
button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the  
BLANK mode is ON.  
MyScreen is a mode that the customer-customized screen is displayed. This is the  
blue screen at the factory setting. Refer to the description of MyScreen below.  
ORIGINAL is a mode that the factory fixed screen is displayed.  
•
When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.  
Select Start Up Screen: Select the screen in case of no signal input with the button.  
/
The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when no signal is input.  
My Screen is a mode that the customer-customized screen is displayed. This is the  
blue screen at the factory setting. Refer to the description of MyScreen below.  
ORIGINAL is a mode that the factory fixed screen is displayed.  
START UP  
TURN OFF displays the blue screen.  
• When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes.  
MIRROR  
Select Mirror Status: Select the mirror status with the  
/
button.  
button.  
button.  
MENU COLOR  
LANGUAGE  
Select Menu Background Color: Select the color with the  
/
Select Menu Display Language: Select the language with the  
/
Set AUTO OFF: Set 1~99 minutes with the  
automatically enters the standby mode when a signal is not received for the set time.  
Clear AUTO OFF: Select the STOP (0 min.) with the button. When the STOP is  
selected the system does not enter the standby mode even if no signal is received.  
/
button. The system  
AUTO OFF  
SYNC ON G Valid: Select the TURN ON with the  
SYNC ON G Invalid: Select the TURN OFF with the  
button.  
button.  
SYNC ON G  
WHISPER  
• May not be displayed correctly with some input signals when the SYNC ON G is valid. In such  
cases, remove the signal connector so that no signal is received, set the SYNC ON G to invalid,  
and reconnect the signal.  
Set / Crear WHISPER Mode: Press the  
/
button. When the WHISPER is  
selected, the WHISPER mode is active. In the WHISPER mode, acoustic moise level  
from the unit is reduced, and brightness level on screen is a little lower.  
Select Remote Control Sensor: Select the sensors to activate along the menu with  
the  
/
button. Use this function if the remote does not work stably. The ambient  
light may affect the remote.  
VOLUME  
BLANK  
START UP  
MIRROR  
2
IR REMOTE  
3
1
1
2
3
MENU COLOR  
LANGUAGE  
AUTO OFF  
SYNC ON G  
WHISPER  
: active  
: inactive  
IR REMOTE  
ENGLISH-16  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 17  
MAINTENANCE  
Lamp  
HIGH VOLTAGE  
HIGH TEMPERATURE  
HIGH PRESSURE  
Contact your dealer before replacing the lamp.  
For the optional lamp, see the item “Optional Parts” of the Table 12.  
Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and  
wait approximately 45 minutes until the lamp has cooled. The lamp may explode if handled at high  
temperatures.  
WARNING A mercury lamp used in this LCD projector is made of glass and has high  
internal pressure. The mercury lamp can burst with a big noise due to deterioration  
resulting from a shock, crack and passage of time, and can end its service life in unlit  
condition. Lamps also have a considerably different service life and can sometimes end up  
in burst or turn to unlit condition soon after use. Furthermore, when the lamp is blown up,  
glass fragments can get scattered around the lamp house and some gas containing mercury  
inside the lamp can leak out of the projector’s air vent.  
• Handle the lamp with utmost care as it can burst during use if subjected to a shock or  
impact or if scratched or cracked.  
• Probability for the burst will increase if the lamp is used for extended period of time or  
used exceeding the period of replacement. You are advised to follow instructions for lamp  
replacement as soon as they are given (Refer to Table 9 of Page 20, Table 10 of Page 21).  
Avoid any reuse of an old lamp (used lamp) since such reuse can result in burst.  
• In case the lamp gets blown up in a short period of time after use, some electrical failures  
or troubles other than the lamp itself may be suspected as causes. Under such  
circumstances, consult the store where you purchased it or a service company.  
• Should the lamp burst (accompanied by a big bursting noise), perform ventilation  
sufficiently, and exercise maximum caution not to inhale any gas out of the projector’s air  
vent or not to let it enter your eyes or mouth.  
• Should the lamp burst (accompanied by a big bursting noise), make absolutely sure to  
unplug the power cord from the outlet and ask the store where you bought the lamp for  
immediate replacement. You should not engage in cleanup or replacement of the lamp by  
yourself since scattered glass fragments can damage the inside of projector or can result in  
personal injury when you handle it.  
• When you dispose of any used lamps, be sure to observe and follow local ordinances and  
regulations of the area or district where they are subjected to disposal. Generally speaking,  
the lamps are treated similarly as glasses and bottles in most cases, but there are areas or  
districts where lamps are classified as a separate collection, and so be sure to use caution.  
• Never use the lamp in a state where the lamp cover is removed.  
Lamp Life  
Projector lamps have a finite life. The image will become darker, and hues will become weaker,  
after a lamp has been used for a long period of time.  
Replace the lamp if the LAMP indicator is red, or the CHANGE THE LAMP message appears  
when the projector is switched ON. See Table 9 of P.20 and Table 10 of P.21.  
NOTE • The LAMP indicator is also red when the lamp unit reaches high temperature. Before  
replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again.  
If the LAMP indicator is still red, replace the lamp.  
ENGLISH-17  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 18  
MAINTENANCE (continued)  
Replacing the Lamp  
1. Switch the projector OFF, remove the power cord from the  
power outlet, and wait at least 45 minutes for the unit to cool.  
2. Prepare a new lamp.  
3. Check that the projector has cooled sufficiently, and gently  
turn it upside down.  
4. Loosen the two screws as shown in the diagram, and remove  
the lamp cover.  
5. Loosen the three screws, and gently remove the lamp while  
holding the grips. Touching the inside of the lamp case may  
result in uneven coloring.  
6. Install the new lamp and tighten the three screws firmly.  
Also steadily push the opposite side of the screwed lamp into  
the unit.  
7. Replace the lamp cover in position and tighten the two  
screws firmly.  
8. Gently turn the projector right-side up.  
CAUTION • Ensure that screws are tightened  
properly. Screws not tightened fully may result  
in injury or accidents.  
• Do not use the projector with the lamp cover  
removed.  
Resetting the Lamp Timer  
Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP  
indicator is red, or the CHANGE THE LAMP message is displayed, complete the following  
operation within ten minutes of switching power ON. The power will be turned off automatically in  
over 10 minutes.  
1. Switch power ON, and press the RESET button, for approximately three seconds. The ‘LAMP  
xxxx hr’ message will appear on the lamp timer on the bottom of the screen.  
2. Press the MENU button on the remote control transmitter, or the RESET button on the control  
panel, while the lamp timer is displayed. The ‘LAMP xxxx → 0 I CANCEL’ message will  
then appear.  
3. Press the  
and select 0, and wait until the timer display is cleared.  
NOTE • Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always  
when replacing the lamp. The message functions will not operate properly if the lamp timer is not  
reset correctly.  
ENGLISH-18  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 19  
MAINTENANCE (continued)  
Air Filter  
Cleaning the air Filter  
The air filter should be cleaned as described below at intervals of approximately 100 hours.  
1. Switch the projector power supply OFF, and remove the power cord from the power outlet.  
2. Clean the air filter with a vacuum cleaner.  
Replacing the Air Filter  
Replace the air filter if contamination cannot be removed, or if it is damaged.  
1. Remove the filter cover.  
2. Remove the old filter.  
3. Set the new filter and the filter cover.  
CAUTION • Switch power OFF and remove the power cord from the power  
outlet before beginning maintenance work. Please read the separate “SAFETY  
INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.  
• Replace the air filter if contamination cannot be removed, or if it is damaged.  
Contact your dealer in such case. For the optional air filter, see the item “Optional  
Parts” of the Table 12.  
• Do not use the equipment with the air filter removed.  
• When the air filter is clogged with dust etc. the power supply is switched OFF  
automatically to prevent the temperature rising inside the projector.  
Other Maintenance  
Maintenance Inside the Equipment  
For safety reasons, ensure that the equipment is cleaned and checked by the dealer once every two  
years. Maintaining the equipment by yourself is dangerous.  
Cleaning the Lens  
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.  
Cleaning the Cabinet and Remote control transmitter  
Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth  
dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.  
CAUTION • Switch power OFF and remove the power cord from the power  
outlet before beginning maintenance work. Please read the separate “SAFETY  
INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.  
• Do not use detergents or chemicals other than those noted above (e.g. benzene  
or thinners).  
• Do not use cleaning sprays.  
• Do not rub with hard materials, or tap the equipment.  
NOTE • When this projector is brought into a warm room from a cold outdoor, condensation can  
take place on the projection lens and mirror inside, blurring the screen and reducing your eyesight,  
but do not worry. The condensation will disappear and the screen will return to a normal condition  
no sooner than the projector acclimates to the surrounding temperature.  
ENGLISH-19  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 20  
TROUBLESHOOTING  
OSD Message  
The messages as described below may appear on the screen at power ON. Take the appropriate  
measures when such messages appears.  
Table 9. OSD Message  
Message  
Contents  
The usage time of lamp will be reaching 2000 hr  
shortly.(*2)  
It is recommended to replace the lamp soon. Prepare a  
new lamp as a replacement.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
(*1)  
The usage time of lamp will be reaching 2000 hr shortly.  
It is recommended to replace the lamp within * *  
hours.(*2)  
It might be happened that the lamp is cut off before * * hr  
by any chance. Power will be switched OFF  
automatically in * * hours. Replace the lamp as shown in  
P.17~18 “Lamp”. Always reset the lamp timer after  
replacing the lamp.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
THE POWER WILL TURN OFF  
AFTER ** hr.  
(*1)  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIME.  
THE POWER WILL  
TURN OFF  
The usage time of lamp is about to reach. Power will be  
switched OFF in a few minutes.(*2)  
Switch power OFF immediately and replace the lamp as  
shown in P.17 ~18 “Lamp”. Always reset the lamp timer  
after replacing the lamp.  
AFTER 0 hr.  
NO INPUT IS DETECTED  
No input signal found.  
Check signal input connections and signal sources.  
ON ***  
The horizontal or vertical frequency of the input signal is  
not within the specified range.  
Check the specifications of the equipment and the signal  
source.  
SYNC IS OUT OF RANGE  
ON ***  
The internal temperature has risen.  
Switch power OFF, and wait 20 minutes until the  
equipment cools.  
Check the following and Switch power ON again.  
* Are the ventilation openings blocked.  
* Is the air filter dirty.  
CHECK THE AIR FLOW  
* Is the ambient temperature in excess of 35°C.  
NOTE (*1) This message is cleared automatically after approximately three minutes, and  
appears every time power is switched ON.  
(*2) The unit has a function to turn the power off which will be active when the usage time reaches  
2000 hr. However the life of lamp might be much different among lamps, so that it might be  
happened that a lamp is cut off before the function is active.  
ENGLISH-20  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 21  
TROUBLESHOOTING (continued)  
Indicators Message  
The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the  
appropriate measures.  
Table 10. Indicators Message  
POWER LAMP TEMP  
Contents  
indicator indicator indicator  
Lights  
Turns off Turns off The Standby mode has been set.  
orange  
Blinks  
Turns off Turns off Warming up. Please wait.  
green  
Lights  
Turns off Turns off ON. Normal operation possible.  
green  
Blinks  
orange  
Turns off Turns off Cooling. Please wait.  
Cooling. Please wait.  
Blinks red  
-
-
The error is found. Take the appropriate measures when the  
POWER indicator ceases blinking  
Lamp is not lit.  
The interior of the equipment may be too hot. Switch power OFF,  
wait 20 minutes until the equipment cools, and check whether the  
ventilation openings are blocked, whether the air filter is dirty, or  
whether the ambient temperature exceeds 35 °C. And switch  
power ON again. Replace the lamp if the same problem occurs.  
Blinks  
/Lights red  
Lights  
red  
Turns off  
Lamp or lamp cover is not found, or hasn’t been fitted in correctly.  
Switch power OFF, and wait for 45 minutes until the equipment  
cools. Check fitting of the lamp and lamp cover, and switch power  
ON again. Contact your dealer if the same problem occurs again.  
Blinks  
/Lights red  
Blinks  
red  
Turns off  
The cooling fan is not operating.  
Blinks  
/Lights red  
Blinks Switch power OFF, and wait for 20 minutes until the equipment  
Turns off  
cools. Check for foreign matters in the fan, and switch power ON  
again. Contact your dealer if the same problem occurs again.  
red  
The interior of the equipment is too hot.  
Switch power OFF, and wait for 20 minutes until the equipment  
cools. Check whether the ventilation openings are blocked,  
whether the air filter is dirty, or whether the ambient temperature  
exceeds 35 °C. Then switch power ON again. Contact your dealer if  
the same problem occurs again.  
Blinks  
/Lights red  
Turns off Lights red  
The interior of the equipment is too cool.  
Lights  
green  
Blinks  
red  
Blinks Check whether the ambient temperature is below 0°C. Contact your  
dealer if the same problem occurs when the ambient temperature is  
red  
0~35°C.  
NOTE When the internal temperature becomes excessive power is switched OFF automatically  
for safety reasons, and the indicator is extinguished. Set the power switch to [  
O] and wait for 20  
minutes until the equipment has cooled sufficiently.  
ENGLISH-21  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 22  
TROUBLESHOOTING (continued)  
Symptom  
Before requesting repair, check in accordance with the following chart. If the situation cannot be  
corrected, then contact your dealer.  
Table 11. Symptom  
Symptom  
Possible cause  
Remedy  
Page  
The main power switch is not  
turned on.  
Turn on the main power switch.  
8,9  
The power cord is  
disconnected.  
Plug the power cord into an AC  
power outlet.  
The power is not  
turned on.  
Turn off the projector with the main  
power switch (set the power switch  
The main power was  
disconnected during operation to [O]), and wait for about 20  
by the power failure and so on. minutes. When the equipment has  
cooled enough, turn power on.  
9
The input is not correctly set.  
No signal input.  
Use the projector or remote control  
Connect correctly.  
10  
7,8  
7,8  
No video or audio.  
The projector is not correctly  
connected.  
Connect correctly.  
Press VOLUME  
control or display the menu screen  
and adjust the volume.  
on the remote  
Video is present but  
no audio.  
The volume is set to minimum.  
11,15  
Mute is turned on.  
Press the MUTE  
Connect correctly.  
button.  
11  
7,8  
12  
9
The projector is not correctly  
connected.  
Audio is present but  
no video.  
The brightness adjustment knob Select BRIGHT with the MENU  
is rotated fully clockwise.  
button and the press the  
button.  
The lens cap is still attached.  
Remove the lens cap.  
Colors are pale and Color density and color  
Adjust the video.  
12  
color matching is  
Images are dark.  
Video is blurred.  
matching are not correctly  
Brightness and contrast are not  
correctly adjusted.  
Adjust the video.  
12  
17  
The lamp is nearing the end of  
its service life.  
Replace with a new lamp.  
Clear WHISPER mode.  
WHISPER mode is set.  
15  
Focus or H PHASE is out of  
adjustment.  
Adjust the focus or H PHASE.  
9,12  
ENGLISH-22  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 23  
SPECIFICATIONS  
Table 12. Specifications  
Item  
Specification  
Product name  
Liquid crystal projector  
Panel size  
2.3 cm (0.9 type)  
TFT active matrix  
Liquid  
crystal  
panel  
Drive system  
CP-X430:786,432 pixels (1024 horizontal x 768 vertical)  
CP-S420:480,000 pixels (800 horizontal x 600 vertical)  
Pixels  
Lens  
Zoom lens F=1.7 ~ 2.1 f=36.8 ~ 47.8 mm  
250 W UHB  
Lamp  
Speaker  
1.0W+1.0W (stereo)  
Power supply  
Power consumption  
Temperature range  
Size  
AC100 ~ 120V, 4.5A / AC220 ~ 240V, 1.9A  
410W  
0 ~ 35°C (Operating)  
360 (W) x 106 (H) x 256.5 (D) mm  
4.5 kg  
Weight (mass)  
Video: Analog 0.7Vp-p, 75Ω terminator (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
1
2
RGB IN  
D-sub 15-pin shrink jack  
RGB  
signal  
input  
TMDS, DC: 150~1200 mV / AC: 1.56 Vp-p  
TTL Level (Positive/Negative)  
DVI (CP-X430 only)  
RGB1  
200mVrms, 50 kΩ (max. 3.0Vp-p)  
Stereo mini jack  
DVI (CP-  
X430 only)  
AUDIO IN  
RGB2  
1.0Vp-p, 75Ω terminator  
RCA jack  
VIDEO IN  
Brightness signal: 1.0Vp-p, 75Ω terminator  
Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator  
0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator  
Mini DIN 4-pin jack  
S-VIDEO IN  
Video  
signal  
input  
Y
1.0 Vp-p, 75 Ω Terminator (Positive)  
COMPONENT  
VIDEO  
CB/PB 0.7 Vp-p, 75 Ω Terminator (Positive)  
CR/PR 0.7 Vp-p, 75 Ω Terminator (Positive)  
L
200mVrms, 50 kΩ (max. 3.0Vp-p)  
RCA jack  
AUDIO IN  
R
Video: Analog 0.7Vp-p, 75Ω output impedance (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
RGB OUT  
Signal  
output  
D-sub 15-pin shrink jack  
200mVrms, output impedance 1 kΩ (max. 3.0Vp-p)  
Stereo mini jack  
AUDIO OUT  
CONTROL  
USB  
D-sub 15-pin shrink plug  
USB jack (B type)  
Control  
functions  
Lamp: DT00471  
Air Filter: NJ06131  
Optional Parts  
* For others, consult your dealer.  
NOTE • This specifications are subject to change without notice.  
ENGLISH-23  
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 24  
WARRANTY AND AFTER-SERVICE  
If a problem occurs with the equipment, first refer to the P.20 “TROUBLESHOOTING” section and  
run through the suggested checks. If this does not resolve the problem contact your dealer or service  
company. They will tell you what warranty condition is applied.  
ENGLISH-24  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 1  
TECHNICAL  
Dimension Diagram  
O C N T R O L  
R G B O U T  
I N  
A U D I O  
S B U  
A U D I  
2 O  
O U T  
R
1
I N  
A U D I O  
V I D E O I N L  
S - V I D E O I N  
R G B I N  
1
2
Y
B
/ P B  
C
R
/ P R  
C
D V I  
C O M P O N E N T V I D E O  
360  
108.4  
Unit : mm  
Signal Connector Pin Assignment  
1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT)  
Pin No  
Signal  
Video input Red  
Video input Green  
Video input Blue  
-
Pin No  
Signal  
Pin No  
Signal  
1
2
3
4
5
6
7
8
9
-
RGB IN 1: SCL(DDC)  
10  
Ground  
15  
RGB IN 2:  
RGB OUT:  
-
11  
-
-
RGB IN 1: SDA(DDC)  
Ground  
12  
RGB IN 2:  
RGB OUT:  
-
Ground Red  
Ground Green  
Ground Blue  
-
13  
14  
H. sync./ Composite sync.  
Vertical sync  
2. Digital Receptacle Connector (DVI) (*CP-X430 only)  
Pin No  
Signal  
T.M.D.S. Data 2 -  
T.M.D.S. Data 2 +  
T.M.D.S. Data 2 / 4 Shield  
-
Pin No  
Signal  
Pin No  
Signal  
-
1
2
11  
T.M.D.S. Data 1 / 3 Shield  
21  
12  
-
-
22  
T.M.D.S. Clock Shield  
T.M.D.S. Clock +  
T.M.D.S. Clock -  
3
13  
23  
4
14  
+5V Power  
24  
5
-
15  
Ground (+5V, Analog H/V Sync.)  
Hot-Plug Sense  
T.M.D.S. Data 0 -  
T.M.D.S. Data 0 +  
T.M.D.S. Data 0 / 5 Shield  
-
6
DDC Clock  
16  
7
DDC Data  
17  
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
8
Analog V. Sync.  
T.M.D.S. Data 1 -  
T.M.D.S. Data 1 +  
18  
17 18 19 20 21 22 23 24  
9
19  
10  
20  
3. Mini Din 4-pin Connector (S-VIDEO)  
Pin No  
Signal  
Color:0.286Vp-p (NTSC, burst signal),75Ω terminator  
1
0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator  
2
3
4
Brightness:1.0Vp-p, 75Ω terminator  
Ground  
Ground  
TECHNICAL - 1  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 2  
TECHNICAL (continued)  
Example of computer signal  
Display mode  
CP-S420  
Resolution  
fH (kHz)  
fV (Hz)  
Rating  
Signal mode  
H × V  
CP-X430  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
640 × 350  
640 × 400  
720 × 400  
640 × 480  
640 × 480  
640 × 480  
640 × 480  
640 × 480  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
832 × 624  
1024 × 768  
1024 × 768  
1024 × 768  
1024 × 768  
1152 × 864  
1280 × 960  
1280 × 1024  
37.9  
37.9  
37.9  
31.5  
35.0  
37.9  
37.5  
43.3  
35.2  
37.9  
48.1  
46.9  
53.7  
49.7  
48.4  
56.5  
60.0  
68.7  
67.5  
60.0  
64.0  
85.1  
85.1  
85.0  
59.9  
66.7  
72.8  
75.0  
85.0  
56.3  
60.3  
72.2  
75.0  
85.1  
74.5  
60.0  
70.1  
75.0  
85.0  
75.0  
60.0  
60.0  
VESA  
VESA  
VESA  
VESA  
VGA-1  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
VGA-2  
TEXT  
VGA (60Hz)  
Mac13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
SXGA (75Hz)  
SXGA (60Hz)  
SXGA (60Hz)  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
1280 × 1024  
80.0  
75.0  
VESA  
SXGA (75Hz)  
Zoom out  
NOTE • Some computers may have multiple display screen modes. Use of some of these modes  
will not be possible with this projector.  
• Be sure to check jack type, signal level, timing and resolution before connecting this projector to a  
computer.  
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the  
number of display pixels above.  
• The image may not be displayed correctly when the input sync. signal is "Composite Sync." or  
"Sync. on G".  
• The image might be something wrong with computer by computer on the DVI mode. In the case, it  
is recommended to reduce the resolution and / or reflesh rate.(CP-X430 only)  
TECHNICAL - 2  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 3  
TECHNICAL (continued)  
Initial set signals  
The following signals are used for the initial settings.  
The signal timing of some computer models may be different. In such case, refer to adjust the  
V.POSIT and H.POSIT of the menu.  
Back porch b  
Front porch d  
Back porch b  
Display interval c  
Front porch d  
Display interval c  
Sync a  
Sync a  
Computer /  
Signal  
Horizontal signal timing (µs)  
Computer /  
Signal  
Vertical signal timimg (lines)  
a
b
c
d
a
3
b
60  
c
350  
d
32  
VGA-1 (85Hz)  
VGA-2 (85Hz)  
TEXT  
2.0  
3.0  
20.3  
1.0  
VGA-1 (85Hz)  
VGA-2 (85Hz)  
TEXT  
2.0  
2.0  
3.8  
2.1  
1.3  
2.0  
1.6  
2.0  
3.2  
2.4  
1.6  
1.1  
1.1  
2.1  
1.8  
1.2  
1.0  
1.2  
1.0  
1.0  
1.1  
3.0  
3.0  
1.9  
3.2  
3.8  
3.8  
2.2  
3.6  
2.2  
1.3  
3.2  
2.7  
3.9  
2.5  
1.9  
2.2  
2.2  
2.4  
2.9  
2.3  
1.8  
20.3  
20.3  
25.4  
21.2  
20.3  
20.3  
17.8  
22.2  
20.0  
16.0  
16.2  
14.2  
14.5  
15.8  
13.7  
13.0  
10.8  
10.7  
11.9  
11.9  
9.5  
1.0  
1.0  
0.6  
2.1  
1.0  
0.5  
1.6  
0.7  
1.0  
1.1  
0.3  
0.6  
0.6  
0.4  
0.3  
0.2  
0.5  
0.6  
0.9  
0.4  
0.1  
3
3
2
3
3
3
3
2
4
6
3
3
3
6
6
3
3
3
3
3
3
41  
42  
33  
39  
28  
16  
25  
22  
23  
23  
21  
27  
39  
29  
29  
28  
36  
32  
36  
38  
38  
400  
480  
480  
480  
480  
480  
480  
600  
600  
600  
600  
600  
624  
768  
768  
768  
768  
864  
960  
1024  
1024  
1
1
VGA (60Hz)  
Mac 13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac 16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
1152×864 (75Hz)  
1280×960 (60Hz)  
1280×1024 (60Hz)  
1280×1024 (75Hz)  
VGA (60Hz)  
Mac 13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac 16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
1152×864 (75Hz)  
1280×960 (60Hz)  
1280×1024 (60Hz)  
1280×1024 (75Hz)  
10  
3
9
1
1
1
1
37  
1
1
1
3
3
1
1
1
1
1
1
TECHNICAL - 3  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 4  
TECHNICAL (continued)  
Connection to the Mouse Control  
1. PS/2, ADB or Serial Mouse  
(1) Turn off the projector and computer, and connect the two units with the appropriate cable. For  
PS/2 mouse control (for IBM and compatible), use the enclosed mouse cable. For others, consult  
your dealer.  
(2) Disconnect the USB cable from the projector if it is connected. Then turn on the projector.  
(3) Turn on the computer.  
(4) Start the mouse function. If the mouse has not been started, reboot the computer (soft reboot or  
reboot buttons). Refer to the descriptions of “DISC PAD” and “MOUSE/RIGHT button” of page 4.  
2. USB Mouse  
(1) Connect the projector and computer with a suitable commercially available USB cable. Consult  
your dealer to get the cable, if you need.  
(2) Start the mouse function. Refer to the descriptions of “DISC PAD” and “MOUSE/RIGHT  
button” of page 4.  
NOTE • Before connecting, read the instruction manuals of the devices to be connected.  
• In the case of notebook type computers with an internal pointing device, the mouse control  
function will not work unless the internal pointing device is disabled. In such case, disable the  
internal pointing device and change the BIOS setting to select an external mouse before the  
operations described in (1) to (4) above.  
Also, some computers may not have a utility program to operate a mouse.  
Refer to the computer hardware manual for detail.  
PS/2 Mouse  
Projector  
1
Computer  
1
2
3
4
5
6
DATA  
CLK  
DATA  
2
3
Mouse jack  
Mini DIN 6-pin  
CONTROL Terminal  
GND  
+5V  
CLK  
4
D-sub 15-pin shrink jack  
5
6
7
SEL0  
RTS  
6
5
4
3
8
2
1
+5V  
9
10  
11  
12  
13  
14  
15  
GND  
TECHNICAL - 4  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 5  
TECHNICAL (continued)  
ADB Mouse  
Projector  
Computer  
1
2
3
4
5
6
1
2
3
4
ADB  
(
)
POWER ON  
CONTROL Terminal  
DATA  
RTS  
+5V  
GND  
Mouse jack  
Mini DIN 4-pin  
D-sub 15-pin shrink jack  
7
8
9
3
4
+5V  
GND  
10  
11  
12  
13  
14  
15  
1
2
Serial Mouse  
Projector  
Computer  
CD  
RD  
1
2
3
4
5
1
2
3
4
5
6
7
8
9
CONTROL Terminal  
TD  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
Mouse jack  
D-sub 9-pin  
D-sub 15-pin shrink jack  
SEL0  
RTS  
6
7
1
2
3
4
5
8
9
8
9
6
7
10  
11  
12  
13  
14  
15  
GND  
TD  
USB Mouse  
USB jack  
(B type)  
Projector  
Computer  
1 +5V  
USB jack  
(A type)  
+
5V  
1
2
3
1
4
—
—
DATA  
DATA  
2
2
3
4
+
+
DATA  
DATA 3  
1
2
3
4
GND  
GND  
4
USB cable  
TECHNICAL - 5  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 6  
TECHNICAL (continued)  
RS-232C communication  
(1) Turn off the projector and computer power supplies and connect with the RS-232C cable.  
(2) Turn on the computer power supply and, after the computer has started up, turn on the projector  
power supply.  
Projector  
Computer  
RS-232C jack  
D-sub 9-pin  
1
2
3
4
5
1
2
3
4
5
6
7
8
9
CD  
RD  
Control jack  
D-sub 15-pin shrink jack  
TD  
2
3
4
5
1
DTR  
GND  
DSR  
RTS  
CTS  
RI  
6
7
8
9
SELO  
RTS  
6
7
8
9
GND  
10  
11  
12  
13  
14  
15  
RD  
TD  
Communications setting  
19200bps, 8N1  
1 Protocol  
Consist of header (7 bytes) + command data (6 bytes).  
2 Header  
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high  
CRC_low : Lower byte of CRC flag for command data.  
CRC_high : Upper byte of CRC flag for command data.  
3 Command data  
Command data chart  
byte_0  
byte_1  
high  
byte_2  
byte_3  
byte_4  
Setting code  
low high  
byte_5  
Action  
Type  
low  
low  
high  
Action (byte_0 - 1)  
Action  
Classification  
Content  
1
2
4
5
6
SET  
GET  
Change setting to desired value.  
Read projector internal setup value.  
Increment setup value by 1.  
Decrement setup value by 1.  
Run a command.  
INCREMENT  
DECREMENT  
EXECUTE  
TECHNICAL - 6  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 7  
TECHNICAL (continued)  
Requesting projector status (Get command)  
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’)  
from the computer to the projector.  
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.  
Changing the projector settings (Set command)  
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2  
bytes)) from the computer to the projector.  
(2) The projector changes the setting based on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
Using the projector default settings (Reset Command)  
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2  
bytes) +‘00H’+‘00H’) to the projector.  
(2) The projector changes the specified setting to the default value.  
(3) The projector returns the response code ‘06H’ to the computer.  
Increasing the projector setting value (Increment command)  
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes)  
+‘00H’+‘00H’) to the projector.  
(2) The projector in creases the setting value on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
Decreasing the projector setting value (Decrement command)  
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes)  
+‘00H’ + ‘00H’) to the projector.  
(2) The projector decreases the setting value on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
When a command sent by the projector cannot be understood by the computer  
When the command sent by the projector cannot be understood, the error command ‘15H’ is  
returned by the computer. Some times, the projector ignores RS-232C commands during other  
works. If the error command ‘15H’ is returned, please send the same command again.  
When data sent by the projector cannot be practice  
When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is  
returned.  
When the data length is greater than indicated by the data length code, the projector will ignore the  
excess data code.  
Conversely, when the data length is shorter than indicated by the data length code, an error code  
will be returned to the projector.  
NOTE • Operation cannot be guaranteed when the projector receives an undefined command or  
data.  
•
Provide an interval of at least 40ms between the response code and any other code.  
• The projector outputs test data when the power supply is switched ON, and when the lamp is lit.  
Ignore this data.  
• Commands are not accepted during warm-up.  
TECHNICAL - 7  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 8  
TECHNICAL (continued)  
Command data chart  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
Red  
Orange  
Green  
Blue  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 3B D3 01 00 00 30  
06 00 AB D2 01 00 00 30  
06 00 5B D2 01 00 00 30  
06 00 CB D3 01 00 00 30  
06 00 FB D1 01 00 00 30  
06 00 6B D0 01 00 00 30  
06 00 9B D0 01 00 00 30  
06 00 FB CA 01 00 00 30  
06 00 FB E2 01 00 00 30  
06 00 08 D3 02 00 00 30  
06 00 C7 D2 01 00 01 30  
06 00 57 D3 01 00 01 30  
06 00 A7 D3 01 00 01 30  
06 00 37 D2 01 00 01 30  
06 00 F4 D2 02 00 01 30  
06 00 83 D2 01 00 02 30  
06 00 13 D3 01 00 02 30  
06 00 B0 D2 02 00 02 30  
06 00 7F D3 01 00 03 30  
06 00 EF D2 01 00 03 30  
06 00 1F D2 01 00 03 30  
06 00 8F D3 01 00 03 30  
06 00 BF D1 01 00 03 30  
06 00 2F D0 01 00 03 30  
06 00 DF D0 01 00 03 30  
06 00 4C D3 02 00 03 30  
06 00 0B D2 01 00 04 30  
06 00 9B D3 01 00 04 30  
06 00 CB CB 01 00 04 30  
06 00 38 D2 02 00 04 30  
06 00 F7 D3 01 00 05 30  
06 00 67 D2 01 00 05 30  
06 00 97 D2 01 00 05 30  
06 00 07 D3 01 00 05 30  
06 00 37 D1 01 00 05 30  
06 00 A7 D0 01 00 05 30  
06 00 57 D0 01 00 05 30  
06 00 C7 D1 01 00 05 30  
06 00 37 D4 01 00 05 30  
06 00 C4 D3 02 00 05 30  
00 00  
01 00  
02 00  
03 00  
04 00  
05 00  
06 00  
20 00  
40 00  
00 00  
00 00  
01 00  
02 00  
03 00  
00 00  
00 00  
01 00  
00 00  
00 00  
01 00  
02 00  
03 00  
04 00  
05 00  
06 00  
00 00  
00 00  
01 00  
20 00  
00 00  
00 00  
01 00  
02 00  
03 00  
04 00  
05 00  
06 00  
07 00  
08 00  
00 00  
Purple  
White  
Set  
Blank Color  
Black  
MyScreen  
ORIGNAL  
Get  
Normal  
H Inverse  
V lnverse  
H&V Inverse  
Get  
Set  
Set  
Mirror  
Normal  
Freeze  
Get  
Freeze  
Red  
Orange  
Green  
Set  
Set  
Blue  
Menu Color  
Purple  
Transparent  
Gray  
Get  
ORIGNAL  
OFF  
Startup  
MyScreen  
Get  
English  
Français  
Deutsch  
Español  
Italiano  
Norsk  
Set  
Language  
Nederlands  
Português  
Japanese  
Get  
TECHNICAL - 8  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 9  
TECHNICAL (continued)  
Command data chart  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 7C D2 02 00 07 30  
06 00 1A D2 04 00 07 30  
06 00 CB D3 05 00 07 30  
06 00 08 86 02 00 10 31  
06 00 6E 86 04 00 10 31  
06 00 BF 87 05 00 10 31  
06 00 58 D3 06 00 00 70  
06 00 A4 D2 06 00 01 70  
06 00 E0 D2 06 00 02 70  
06 00 IC D3 06 00 03 70  
06 00 68 D2 06 00 04 70  
06 00 94 D3 06 00 05 70  
06 00 D0 D3 06 00 06 70  
06 00 C4 D0 06 00 09 70  
06 00 80 D0 06 00 0A 70  
06 00 7C D1 06 00 0B 70  
06 00 08 D0 06 00 0C 70  
06 00 98 D8 06 00 20 70  
06 00 91 D0 06 00 0A 20  
06 00 FB D8 01 00 20 30  
06 00 6B D9 01 00 20 30  
06 00 C8 D8 02 00 20 30  
06 00 D9 D8 02 00 20 60  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
01 00  
00 00  
00 00  
Magnify  
Increment  
Decrement  
Get  
Auto off  
Increment  
Decrement  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Brightness Reset  
Contrast Reset  
V.Position Reset  
H.Position Reset  
H.Size Reset  
Color Balance R Reset  
Color Balance B Reset  
Sharpness Reset  
Color Reset  
Tint Reset  
Keystone_V Reset  
Keystone_H Reset  
Auto  
off  
Set  
on  
Blank on/off  
Get  
Get  
(Example of Return)  
00 00 01 00  
(Normal) (Cover-error)  
02 00  
03 00  
(Lamp-error)  
Error Status  
Power  
(Fan-error)  
04 00  
(Temp-error)  
05 00  
(Air flow-error)  
06 00  
(Lamp-Time-over)  
OFF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00 2A D3 01 00 00 60  
06 00 BA D2 01 00 00 60  
06 00 19 D3 02 00 00 60  
00 00  
01 00  
00 00  
Set  
ON  
Get  
RGB1  
RGB2  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 FE D2 01 00 00 20  
06 00 3E D0 01 00 00 20  
06 00 0E D2 01 00 00 20  
06 00 6E D3 01 00 00 20  
06 00 9E D3 01 00 00 20  
06 00 AE D1 01 00 00 20  
06 00 CD D2 02 00 00 20  
06 00 31 D3 02 00 01 20  
06 00 57 D3 04 00 01 20  
00 00  
04 00  
03 00  
01 00  
02 00  
05 00  
00 00  
00 00  
00 00  
DVI  
Set  
Input Source  
Video  
SVideo  
Component BE EF  
Get  
Get  
BE EF  
BE EF  
BE EF  
Increment  
Volume  
Decrement  
BE EF  
03  
06 00 86 D2 05 00 01 20  
00 00  
TECHNICAL - 9  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 10  
TECHNICAL (continued)  
Command data chart  
Command data  
Type Setting code  
Names  
Mute  
Operation type  
Normal  
Header  
CRC Action  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 46 D3 01 00 02 20  
06 00 D6 D2 01 00 02 20  
06 00 75 D3 02 00 02 20  
06 00 89 D2 02 00 03 20  
06 00 EF D2 04 00 03 20  
06 00 3E D3 05 00 03 20  
06 00 FD D3 02 00 04 20  
06 00 9B D3 04 00 04 20  
06 00 4A D2 05 00 04 20  
06 00 01 D2 02 00 05 20  
06 00 67 D2 04 00 05 20  
06 00 B6 D3 05 00 05 20  
06 00 45 D2 02 00 06 20  
06 00 23 D2 04 00 06 20  
06 00 F2 D3 05 00 06 20  
06 00 B9 D3 02 00 07 20  
06 00 DF D3 04 00 07 20  
06 00 0E D2 05 00 07 20  
00 00  
01 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Set  
Mute  
Get  
Get  
Brightness  
Contrast  
Increment  
Decrement  
Get  
Increment  
Decrement  
Get  
Color  
Balance R  
Increment  
Decrement  
Get  
Color  
Balance B  
Increment  
Decrement  
Get  
Increment  
Decrement  
Keystone_V  
Keystone_H  
Get  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00 E9 D0 02 00 0B 20  
06 00 8F D0 04 00 0B 20  
06 00 5E D1 05 00 0B 20  
00 00  
00 00  
00 00  
Increment  
Decrement  
4:3, Full  
16:9  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 9E D0 01 00 08 20  
06 00 0E D1 01 00 08 20  
06 00 FE D1 01 00 08 20  
06 00 AD D0 02 00 08 20  
06 00 62 D1 01 00 09 20  
06 00 F2 D0 01 00 09 20  
06 00 02 D0 01 00 09 20  
06 00 51 D1 02 00 09 20  
06 00 0D 83 02 00 00 21  
06 00 6B 83 04 00 00 21  
06 00 BA 82 05 00 00 21  
06 00 F1 82 02 00 01 21  
06 00 97 82 04 00 01 21  
06 00 46 83 05 00 01 21  
06 00 B5 82 02 00 02 21  
06 00 D3 82 04 00 02 21  
06 00 02 83 05 00 02 21  
06 00 49 83 02 00 03 21  
06 00 2F 83 04 00 03 21  
06 00 FE 82 05 00 03 21  
00 00  
01 00  
02 00  
00 00  
00 00  
01 00  
02 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Set  
Set  
Aspect  
Small  
Get  
Default  
Bottom  
Top  
Display  
Position at  
16 : 9 or Small  
Get  
Get  
V.Position  
H.Position  
H.Size  
Increment  
Decrement  
Get  
Increment  
Decrement  
Get  
Increment  
Decrement  
Get  
Increment  
Decrement  
H.Phase  
TECHNICAL - 10  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 11  
TECHNICAL (continued)  
Command data chart  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00 F1 72 02 00 01 22  
06 00 97 72 04 00 01 22  
06 00 46 73 05 00 01 22  
06 00 B5 72 02 00 02 22  
06 00 D3 72 04 00 02 22  
06 00 02 73 05 00 02 22  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Sharpness  
Increment  
Decrement  
Get  
Increment  
Decrement  
Color  
Tint  
Get  
Increment  
Decrement  
Auto  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 49 73 02 00 03 22  
06 00 2F 73 04 00 03 22  
06 00 FE 72 05 00 03 22  
06 00 9E 75 01 00 00 22  
06 00 FE 71 01 00 00 22  
06 00 6E 70 01 00 00 22  
06 00 6E 75 01 00 00 22  
06 00 5E 72 01 00 00 22  
06 00 FE 74 01 00 00 22  
06 00 0E 71 01 00 00 22  
00 00  
00 00  
00 00  
0A 00  
04 00  
05 00  
09 00  
02 00  
08 00  
07 00  
NTSC  
PAL  
SECAM  
NTSC 4.43  
M-PAL  
Set  
Video Format  
N-PAL  
Get  
BE EF  
03  
06 00 0D 73 02 00 00 22  
00 00  
1080i  
1035i  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 F2 73 01 00 05 22  
06 00 62 72 01 00 05 22  
06 00 C1 73 02 00 05 22  
06 00 FE 22 01 00 00 23  
06 00 6E 23 01 00 00 23  
06 00 9E 23 01 00 00 23  
06 00 CD 22 02 00 00 23  
06 00 02 23 01 00 01 23  
06 00 92 22 01 00 01 23  
06 00 62 22 01 00 01 23  
06 00 F2 23 01 00 01 23  
00 00  
01 00  
00 00  
00 00  
01 00  
02 00  
00 00  
00 00  
01 00  
03 00  
02 00  
Set  
Set  
HDTV  
Get  
off  
Large  
PinP Size  
Small  
Get  
Upper left  
Upper right  
bottom left  
bottom right  
Set  
PinP Position  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00 31 23 02 00 01 23  
06 00 BA 22 01 00 03 23  
06 00 2A 23 01 00 03 23  
06 00 89 22 02 00 03 23  
06 00 D6 22 01 00 02 23  
06 00 26 22 01 00 02 23  
00 00  
00 00  
01 00  
00 00  
01 00  
02 00  
RGB  
Video  
Get  
Set  
Set  
PinP Audio ch  
PinP Input  
Video  
S-Video  
Get  
BE EF  
03  
06 00 75 23 02 00 02 23  
00 00  
TECHNICAL - 11  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 12  
TECHNICAL (continued)  
Command data chart  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
off  
on  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00 CB D0 01 00 08 30  
06 00 5B D1 01 00 08 30  
06 00 68 D1 02 00 08 30  
01 00  
00 00  
00 00  
Set  
Set  
Sync on G  
Get  
NORMAL  
WHISPER  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 3B 23 01 00 00 33  
06 00 AB 22 01 00 00 33  
06 00 08 23 02 00 00 33  
06 00 C7 F0 01 00 A1 30  
06 00 57 F1 01 00 A1 30  
06 00 A7 F1 01 00 A1 30  
06 00 F4 F0 02 00 A1 30  
06 00 FF 32 01 00 00 26  
06 00 6F 33 01 00 00 26  
06 00 CC 32 02 00 00 26  
06 00 03 33 01 00 01 26  
06 00 93 32 01 00 01 26  
06 00 30 33 02 00 01 26  
06 00 47 33 01 00 02 26  
06 00 D7 32 01 00 02 26  
00 00  
01 00  
00 00  
00 00  
01 00  
02 00  
00 00  
00 00  
01 00  
00 00  
00 00  
01 00  
00 00  
00 00  
01 00  
WHISPER  
GAMMA  
NORMAL  
CINEMA  
DYNAMIC  
Get  
Set  
off  
Set  
Set  
Set  
IR Remote Front  
IR Remote Rear  
on  
Get  
off  
on  
Get  
off  
on  
IR Remote Top  
Get  
BE EF  
03  
06 00 74 33 02 00 02 26  
00 00  
NOTE • The max. 2 IR remote out of 3 (front, rear and top) can be activated.  
TECHNICAL - 12  
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 13  
REGULATORY NOTICES  
FCC Statement Warning  
WARNING: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
INSTRUCTIONS TO USERS: This equipment complies with the requirements  
of FCC (Federal Communication Commission) equipment provided that the  
following conditions are met.  
The cables may have to be used with the core set to the projector side. Use  
the cables which are included with the projector or specified.  
Core  
CAUTION: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate the  
equipment.  
For the Customers in CANADA  
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.  
Pour les utilisateurs au Canada  
AVIS: Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du  
Canada.  
REGULATORY NOTICES - 1  
00CP-S420/CP-X430 03.9.2 0:08 PM ページ 1  
Hitachi America, Ltd., Digital Media Division  
2000 Sierra Point Parkway, MS760 Brisbane,  
CA 94005-1835 USA  
Hitachi Europe AB. (Finnish branch)  
Askonkatu 9 C, FIN-15100 Lahti FINLAND  
Tel: +358-3885-8266 Fax: +358-3885-8272  
Tel: +1-800-225-1741 Fax: +1-650-244-7776  
www.hitachi.us/digitalmedia  
Hitachi Europe S.A., Digital Media Group  
364 Kifissias & 1 Delfon Ste., 152 33 Chalandri  
GREECE  
Hitachi Canada, Ltd.  
6740 Campobello Road, Mississauga, Ontario,  
L5N2L8 CANADA  
Tel: +30-210-6837200 Fax: +30-210-6835694  
Hitachi Europe S.A. (France–Lyon Office),  
Digital Medial Group  
Tel: +1-905-821-4545 Fax: +1-905-821-1101  
Hitachi Europe, Digital Media Group  
Whitebrook Park, Lower Cookham Road,  
Maidenhead, Berkshire, SL6 8YA UK  
B.P. 45, 4 Allee des Sorbiers,  
69671 BRON CEDEX FRANCE  
Tel: +33-4-72142970 Fax: +33-4-72-142999  
Tel: +44-1628 643000 Fax: +44-162-864-3400  
Hitachi Europe S.A. Digital Media Group  
Gran Via Carlos III, 101, 1, 08028 Barcelona SPAIN  
Tel: +34-93-409-2549 Fax: +34-934-901-863  
Hitachi Europe, Digital Media Group  
Bergensesteenweg 421, 1600 Sint-Pieters-Leeuw  
BELGIUM  
Hitachi Home Electronics Asia, (S) Pte Ltd.  
16 Collyer Quay #20-00 Hitachi Tower Singapore  
049318 SINGAPORE  
Tel: +32-2-363-9901 Fax: +34-2-363-9900  
Hitachi Europe, Digital Media Group  
Gewerbepark, Hintermattlistr. 3, 5506 Magenwil  
SWITZERLAND  
Tel: +65-6536-2520 Fax: +65-6536-2521  
Hitachi Sales (Malaysia) Sdn. Bhd.  
Wisma Hitachi, No.2, Lorong 13/6A,  
46200 Petaling Jaya, Selangor Darul Ehsan  
MALAYSIA  
Tel: +41-62-889-8011 Fax: +41-62-896-4771  
Hitachi Europe S.r.1, Digital Media Group  
Via T. Gulli, 39, 20147 Milano ITALY  
Tel: +39-02-487861 Fax: +39-02-48786391  
Tel: +60-3-79573455 Fax: +60-3-79556090  
Hitachi Europe GmbH, Digital Media Group  
Dornacher Strasser3,  
85622 Feldkirchen bei Muenchen GERMANY  
Tel: +49-89-991800 Fax: +49-89-99-180-353  
Hitachi Sales (Thailand), Ltd.  
994, 996 Soi Thonglor, Sukhumvit 55 Road,  
Klongton, Klongtoey, Bangkok 10110 THAILAND  
Tel: +66-2-381-8381 Fax: +66-2-381-9520  
Hitachi Europe Ltd., Digital Media Group  
Na Sychrove 975/8, 101 27 Praha 10- Bohdalec  
CZECH REPUBLIC  
Hitachi (Hong Kong), Ltd.  
18/F., EverGain Centre, 28 On Muk Street.,  
Shatin, N.T. HONG KONG  
Tel: +420-267212383 Fax ;420-267-212-384  
Tel: +852-2-1138883 Fax: +852-2-7838535  
Hitachi Europe Ltd. (Moscow office), Digital  
Media Group  
Hitachi Sales Corp. of Taiwan  
2nd Floor, No.65, Nanking East Road, Section 3,  
Taipei TAIWAN  
Millenium House, 12 Trubnaya Stree, Moscow  
103045 RUSSIA  
Tel: +886-2-516-0500 Fax: +886-2-516-1501  
Tel: +7-095-787-40 23 Fax: +7-095-787-4021  
Hitachi Australia Ltd.  
Hitachi Europe AB.  
Level 3, 82 Waterloo Road  
Box 77 (postal address only), S-164 94 Kista  
SWEDEN  
North Ryde N.S.W 2113 AUSTRALIA  
Tel: +61-2-9888-4100 Fax: +61-2-9888-4144  
Tel: +46 8 562 711 00 Fax: +46 8562 711 13  
Hitachi, Ltd.  
Hitachi Europe AB. (Norway branch)  
Strandveien 18, N-1366 Lysaker NORWAY  
Tel: +47-6751-9030 Fax: +47-3399-3900  
15-12, Nishi Simbashi 2-chome, Minato-ku,  
Tokyo, 105 JAPAN  
Tel: +81-3-3502-2111 Fax: +81-3-3506-1440  
Hitachi Europe AB. (Dannish branch)  
Egebaekgaard, Egebaekvej 98, 2850 Naerum  
DENMARK  
Tel: +45-4343-6050 Fax: +45-4343-6051  
Printed in Japan  
*QR51562*  

Spt Wa 1300h User Manual
Schumacher Sc 12000a User Manual
Sanyo 12rls11 User Manual
Mitsubishi Electronics Mr Slim Pla A Aa User Manual
MAYTAG MVWX700X User Manual
LG DN191H User Manual1
DELL VOSTRO 410 User Manual
DELL SC180 User Manual1
Blackstone 36 Griddle User Manual
ACER D1P1818 User Manual