Projector
CP-S335/X340/X345
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that , if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that , if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to chance without notice.
• The manufacture assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of the Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of the Microsoft Corporation.
• Internet Explorer is a trademark of the Microsoft Corporation.
All other trademarks are the property of their respective owners.
1
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NTSC / PAL
/ SECAM video signals onto a screen. It requires just a little space for installation
and gets a large image from short distance.
High Brightness
Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher
brightness image on a screen. The image can be still kept as bright and clean
enough for use in bright rooms.
Low Noise
WHISPER mode is equipped for reducing acoustic noise to realize quieter
operation. It is perfect for use in low luminance rooms where low noise is more
important than brightness.
Rich Connectivity
This projector has a variety of I/O ports. It can be easily connected to many
signal sources like PC, DVD and so on. The rich connectivity provides you
more options to make your presentation impressive.
Compact Body
Even with its many features, this projector is extremely compact and slim,
which gives you more flexibility and usability to use it where you want.
Preparations
About contents of package
Please see the "Contents of package" of the "User's manual - Quick guide". Your
projector should come with the items shown there. Contact immediately your
dealer if anything is missing.
NOTE • Keep the original packing materials for future reshipment. For
moving the projector, be sure to use the original packing material. Use special
caution for the lens part.
3
Part names
Part names
Projector
Remote sensor ( 15)
Zoom knob ( 18)
Speaker
Focus ring ( 18)
Vent ( 6)
Elevator button ( 8)
Lens cover ( 16)
(Slide door)
Elevator foot ( 8)
Front-Right side
Lens ( 16)
Lamp cover
Filter cover ( 40)
(Lamp unit is inside.)
(Air filter and intake vent
are inside.)
(
38)
Bottom side
Power switch ( 16)
Control buttons
AC inlet ( 13)
(See the following page.)
(
5)
Elevator button ( 8)
Ports
(See below.)
Elevator foot ( 8)
Vent ( 6)
Rear-Left side
Restart switch (*) ( 46)
AUDIO OUT port ( 11)
RGB IN1 port ( 11)
AUDIO IN1 port ( 11)
RGB IN2 port ( 11)
S-VIDEO port ( 12)
AUDIO IN1
Y
RGB OUT port ( 11)
COMPONENT
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
CB/PB
VIDEO ports ( 12)
AUDIO IN2
VIDEO
CONTROL port ( 11)
CR/PR
S-VIDEO
Y
USB
COMPONENT VIDEO
CONTROL
Kensington lock slot
CB/PB
CR/PR
Ports
VIDEO port ( 12)
AUDIO IN2 port ( 11)
USB port ( 21)
NOTE (*) About Restart switch: This Projector is controlled by an internal
microprocessor. Under certain exceptional circumstances, the projector may not
operate correctly and the microprocessor will need to be reset. In such a case,
please push the Restart switch by using a cocktail stick or similar and before
turning on again, make the projector cool down at least 10 minutes without
operating. Only push the Restart switch in these exceptional instances.
4
Part names
Control buttons
LAMP indicator ( 44)
LAMP
TEMP indicator ( 44)
TEMP
POWER indicator ( 16)
POWER
Cursor buttons
▲,▼,◄,► ( 22)
STANDBY/ON
INPUT
MENU
STANDBY/ON button ( 16)
INPUT button ( 17)
Remote control
SEARCH button ( 18)
RGB button ( 17)
STANDBY/ON button ( 16)
VIDEO button ( 17)
STANDBY/ON
SEARCH
VIDEO
RGB
AUTO button ( 19)
ASPECT button ( 18)
BLANK
ASPECT
AUTO
BLANK button ( 20)
HOME button ( 21)
HOME
END
PAGE UP
VOLUME
MUTE
MAGNIFY
ON
VOLUME button ( 17)
MAGNIFY ( 20)
PAGE DOWN
ON button
OFF button
PAGE UP button ( 21)
OFF
FREEZE
KEYSTONE
MUTE button ( 17)
END button ( 21)
PAGE DOWN button ( 21)
FREEZE button ( 20)
MENU
POSITION
KEYSTONE button ( 19)
POSITION button ( 19)
MENU button ( 22)
ENTER
Cursor buttons
▲,▼,◄,►( 22)
ENTER button ( 22)
RESET
ESC
ESC button ( 22)
RESET button ( 22)
5
Setting up
Setting up
WARNING ►Place the projector in a stable position horizontally. A fall or
a turnover could cause an injury and/or damage to the projector. Then using
damaged projector could result in a fire and/or an electric shock.
• Don’t place the projector on an unstable, slant or vibrant surface such as a
wobbly or inclined stand.
• Do not place the projector in the side/front/rear-up position, except care of the
air filter.
• For the projector installed bottom-up, use the accessory filter cover for bottom-
up use. And in the case of a ceiling installation or the like, contact your dealer
before installation.
►Place the projection in a cool place, and pay attention enough to ventilation.
The high temperature of the projector could cause a fire, a burn and/or
malfunction to the projector.
• Don’t stop up, block and cover the projector's vents.
• Keep a space of 30 cm or more between the sides and other objects such as
walls.
• Don’t place the projector on a metallic thing or anything weak in heat.
• Don’t place the projector on a carpet, cushion or bedding.
• Don’t place the projector in direct sunlight or near a hot object such as heater.
• Put nothing about lens and vents of the projector. Put nothing on the projector.
• Put nothing that is sucked or sticks to the bottom of projector. This projector
has some intake vents also on the bottom.
►Do not place the projector on the place that gets wet. Damping the projector
or inserting liquid in the projector could cause a fire, an electric shock and/or
malfunction to the projector.
• Don’t place the projector in a bathroom or the outdoors.
• Put nothing containing the liquid near the projector.
CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector
in such place could cause a fire, an electric shock and/or malfunction to the
projector.
• Don’t place the projector near a humidifier, a smoking space or a kitchen.
• Put nothing containing the liquid near the projector.
►Adjust the direction of the projector to keep light from directly hitting the
projector's remote sensor.
6
Setting up
Arrangement
Refer to the illustrations and tables below to determine the screen size and projection
distance.
The values shown in the table are calculated for a full size screen: 800 x 600 for CP-S335 /
1024 x 768 for CP-X340, CP-X345
(a) The screen size (diagonal)
(b) Distance from the projector to the screen (±10%)
(c) The height of the screen (±10%)
(b)
4:3
(a)
16:9
(a)
(c) up
(c) down
At 4:3 screen
(b) Projection distance [m (inch)]
(c) Screen height [cm (inch)]
(a) Screen size
[inch (m)]
min.
max.
down
up
30
40
50
60
70
80
90
(0.8)
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.1
3.7
4.6
6.1
7.6
9.2
(35)
(47)
(59)
(72)
(84)
(96)
(108)
(120)
(144)
(181)
(242)
(303)
1.1
1.4
1.8
2.2
2.5
2.9
3.3
3.6
4.4
5.5
7.3
9.2
(42)
(56)
(71)
5
6
8
9
11
12
14
15
18
23
30
38
46
(2)
(2)
(3)
(4)
(4)
(5)
(5)
(6)
(7)
(9)
41
55
69
82
96
(16)
(22)
(27)
(32)
(38)
(43)
(49)
(54)
(65)
(81)
(1.0)
(1.3)
(1.5)
(1.8)
(2.0)
(2.3)
(85)
(100)
(114)
(129)
(143)
(172)
(216)
(288)
(361)
110
123
137
165
206
274 (108)
343 (135)
411
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.1)
250 (6.4)
300 (7.6)
(12)
(15)
(18)
(363) 11.0 (433)
(162)
At 16:9 screen
(b) Projection distance [m (inch)]
(c) Screen height [cm (inch)]
down up
(a) Screen size
[inch (m)]
min.
max.
30
40
50
60
70
80
90
(0.8)
(1.0)
(1.3)
(1.5)
(1.8)
(2.0)
(2.3)
1.0
1.3
1.6
2.0
2.3
2.7
3.0
3.3
4.0
5.0
6.7
8.4
(38)
(52)
(65)
(78)
(91)
(105)
(118)
(131)
(158)
(197)
(264)
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.8
6.0
8.0
(46)
(62)
(77)
-1
-2
-2
-2
-3
-3
-4
-4
-5
-6
-8
-10
-12
(0)
39
51
64
77
90
(15)
(20)
(25)
(30)
(35)
(41)
(46)
(51)
(61)
(76)
(-1)
(-1)
(-1)
(-1)
(-1)
(-1)
(-2)
(-2)
(-2)
(-3)
(-4)
(-5)
(93)
(109)
(125)
(140)
(156)
(188)
(235)
(314)
103
116
129
154
193
257 (101)
322 (127)
386 (152)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.1)
250 (6.4)
(330) 10.0 (393)
300 (7.6) 10.1 (396) 12.0 (472)
7
Setting up
Adjusting the projector's elevator
WARNING ►Do not adjust the projector’s elevator during use or
immediately after use. Handling while the projector is in a high temperature
could cause a burn and/or malfunction to the projector.
CAUTION ►If you press the elevator button without holding the projector,
the projector might crash down, overturn, smash your fingers and possibly
result in malfunction. To prevent damaging the projector and injuring yourself,
always hold the projector whenever using the elevator buttons to adjust the
elevator feet.
►Except for inclining by the elevator feet adjustment, place the projector
horizontally.
You can use the elevator feet to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator feet is 0 to 9 degrees.
Elevator feet
Elevator button
After making sure that the projector is cool adequately, press and hold in the
elevator buttons while holding the projector.
The elevator buttons and the elevator feet are on the both sides.
1.
2.
3.
Raise or lower the projector to the desired height and the release the elevator
buttons.
When you release the elevator buttons, the elevator feet will lock into position.
As necessary, you can also finely adjust the height of the projector by twisting
the elevator feet by hand.
8
Setting up
About the filter cover for bottom-up use
WARNING ►Do not replace the filter cover during use or immediately
after use. While the projector connects with a power supply, or the projector is
in a high temperature state, handling could cause an electric shock, a fire, a
burn and/or malfunction to the projector.Before handling, make sure the power
switch is off and the power cord is not plugged in, then wait at least 45 minutes.
When the projector is installed bottom up, please use the accessory filter cover
for bottom-up use. It is higher than usual filter cover, to keep the space for intake
ventilation. Please change in the following procedure.
Filter cover’s knob
Filter cover’s knob
To remove
Filter cover for bottom-up use
To set
Filter cover
After making sure that the projector is cool adequately, slowly turn the
projector so that the lens-side is facing up. Please be careful for a projector
not to fall. While the projector is placed lens-side up, hold the projector.
1.
Putting a finger on the filter cover’s knob, slide the filter cover in the direction
of the arrow to remove it.
2.
3. Replace the filter cover for bottom-up use and snap it back into place.
4. Slowly turn the projector so that the top is facing up.
9
Setting up
Connecting your devices
CAUTION ►Turn off all devices prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely
loud noises or other abnormalities that may result in malfunction and/or damage
to the device and/or projector.
►Use the accessory cable or a designated-type cable for the connection.
Some cables have to be used with core set. A too long cable may cause a
certain picture degradation. Please consult with your dealer for details. For
cables that have a core only at one end, connect the core to the projector.
►Make sure that you connect devices to the correct port. Incorrect connection
may result in malfunction and/or damage to the device and/or projector.
NOTE • Whenever attempting to connect a laptop computer to the projector, be sure
to activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to the
instruction manual of the corresponding laptop computer.
• Secure the screws on the connectors and tighten.
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• For some RGB signal modes, the optional Mac adapter is necessary.
• When the image resolution is changed on a computer, depending on an input,
automatic adjust function may take some time and may not be completed. In this case,
you may not be able to see a check box to select “Yes/No” for the new resolution on
Windows. Then the resolution will go back to the original. It might be recommended to
use other CRT or LCD monitors to change the resolution.
About Plug-and-Play capability
Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC
2B. Plug-and-Play can be achieved by connecting this projector to computers that are
VESA DDC (display data channel) compatible.
• Please take advantage of this function by connecting the accessory RGB cable to the
RGB IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other
type of connection is attempted.
• Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
10
Setting up
Examples of connection with a computer
* AUDIO IN1
is linked to
RGB IN1.
RGB cable
Stereo mini
audio cable
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
C
C
B/PB
R/PR
AUDIO IN2
VIDEO
S-VIDEO
Audio out
USB(A)
USB
RGB out RS-232C
COMPONENT VIDEO
CONTROL
USB
cable
RS-232C
cable
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
C
C
B/PB
R/PR
AUDIO IN2
RGB out
Audio out
VIDEO
S-VIDEO
USB
COMPONENT VIDEO
CONTROL
Stereo mini
audio cable
RGB cable
Connecting to a monitor (output)
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
C
B/PB
R/PR
AUDIO IN2
VIDEO
RGB in
C
S-VIDEO
USB
COMPONENT VIDEO
CONTROL
RGB cable
Connecting to a speaker with amplifier (output)
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
C
B/PB
R/PR
Audio in
AUDIO IN2
VIDEO
C
S-VIDEO
USB
COMPONENT VIDEO
CONTROL
Stereo mini
audio cable
11
Setting up
Examples of connection with a VCR/DVD player
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
Audio out
Video out
C
B/PB
R/PR
AUDIO IN2
VIDEO
C
S-VIDEO
USB
COMPONENT VIDEO
CONTROL
Video cable
Stereo mini audio cable
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
Audio out
S-Video out
C
C
B/PB
R/PR
AUDIO IN2
VIDEO
S-VIDEO
USB
COMPONENT VIDEO
CONTROL
S-Video cable
Stereo mini audio cable
Component video out
Y
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
Audio out
C
B/PB
R/PR
CB/PB
AUDIO IN2
VIDEO
C
S-VIDEO
USB
CR/PR
COMPONENT VIDEO
CONTROL
Component video cable
Stereo mini audio cable
Component video out
Y
AUDIO IN1
Y
AUDIO OUT
RGB IN1
RGB IN2
RGB OUT
Audio out
C
C
B/PB
R/PR
CB/PB
AUDIO IN2
VIDEO
S-VIDEO
USB
CR/PR
COMPONENT VIDEO
CONTROL
Component video cable
Stereo mini audio cable
12
Setting up
Connecting power supply
WARNING ►Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection
of the three-pronged plug.
AC inlet
Connector
of the power cord
Connect the connector of the power cord to the
AC inlet of the projector.
1.
2. Firmly plug the power cord's plug into the outlet.
13
Remote control
Remote control
Putting batteries
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a
battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry
place.
• If you observe a leakage of a battery, wipe out the flower and then replace
a battery. If the flower adheres your body or clothes, rinse well with water
immediately.
Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
1.
Insert the batteries.
Align and insert the two AA batteries according to their plus and minus
terminals as indicated in the remote control.
2.
Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into
place.
3.
14
Remote control
Using the remote control
CAUTION ►Be careful in handling the remote control.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may
result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if
you won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely close
range (such as from an inverter fluorescent lamp), hit the projector’s remote
sensor, the remote control may cause to function. Adjust the direction of the
projector to keep light from directly hitting the projector’s remote sensor.
The remote control works with the projector’s remote sensor.
approx. 3 meters
30º
30º
• The range of the remote sensor is 3 meters with a 60- degree range (30 degrees
to the left and right of the remote sensor).
• Also a remote signal reflected in the screen etc. may be available. If it is difficult
to send a remote signal to the sensor directly, please try.
• Since the remote control uses infrared light to send signals to the projector
(Class1 LED), be sure to use the remote control in an area free from obstacles
that could block the remote control’s output signal to the projector.
15
Power on/off
Power on/off
WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE • Turn the power on/off in right order. Please power on the projector
before the connected devices. Power off the projector after the connected devices.
LAMP
STANDBY/ON
BLANK
TEMP
VIDEO
RGB
SEARCH
AUTO
POWER
ASPECT
POWER
indicator
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
STANDBY/ON
INPUT
STANDBY/ON
button
PAGE DOWN
OFF
MENU
FREEZE
KEYSTONE
POSITION
MENU
ENTER
Power switch
ESC
RESET
POWER
Turning on the power
(Solid orange)
POWER
Make sure that the power cord is firmly and correctly
connected to the projector and outlet.
1.
2.
Open the lens cover, and set the power switch to the
ON position.
The power indicator will light to solid orange. Then wait
several seconds because buttons may not function for
these several seconds.
(Blinking green)
POWER
(Solid green)
Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking
green. When the power is completely on, the indicator will stop blinking light
green.
3.
To display the picture, select an input signal according to the section "Selecting an
(
17)
.
input signal"
Turning off the power
Power off?
Press the STANDBY/ON button on the projector or
1.
remote control.
The message "Power off?" will appear on the screen for
approximately 5 seconds.
POWER
(Blinking orange)
Press the STANDBY/ON button on the projector or
2.
remote control again while the message is visible.
POWER
The projector lamp will go off, and the POWER indicator
will begin blinking orange.
(Solid orange)
Then the POWER indicator will stop blinking and light to
solid orange when the lamp cooling is complete.
Make sure that the power indicator lights to solid orange, set the power switch
to the OFF position. The POWER indicator will go off. Close the lens cover.
3.
16
Operating
Operating
STANDBY/ON
BLANK
VIDEO
RGB
SEARCH
AUTO
Adjusting the volume
STANDBY/ON
ASPECT
SEARCH
AUTO
VIDEO
RGB
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
BLANK
ASPECT
OFF
Press the VOLUME button on the remote control.
1.
FREEZE
KEYSTONE
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
POSITION
MENU
A dialog will appear on the screen to aid you in adjusting
the volume.
ENTER
ESC
RESET
PAGE DOWN
2. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button
again. Even if you don’t do anything, the dialog will automatically disappear
after a few seconds.
STANDBY/ON
VIDEO
RGB
SEARCH
Temporarily muting the sound
ASPECT
AUTO
BLANK
BLANK
ASPECT
AUTO
MAGNIFY
ON
HOME
PAGE UP
VOLUME
MUTE
END
PAGE DOWN
OFF
PAGE UP
VOLUME
MUTE
MAGNIFY
ON
HOME
END
Press the MUTE button on the remote control.
1.
FREEZE
KEYSTONE
PAGE DOWN
POSITION
MENU
A dialog will appear on the screen indicating that you have
muted the sound.
OFF
ENTER
ESC
RESET
FREEZE
KEYSTONE
To restore the sound, press the MUTE or VOLUME button.
Even if you don’t do anything, the dialog will automatically disappear after a few
seconds.
LAMP
Selecting an input signal
TEMP
POWER
Press the INPUT button on the projector.
STANDBY/ON
INPUT
1.
MENU
Each time you press the button, the projector switches its
input port as below.
RGB IN1 RGB IN2 VIDEO
COMPONENT VIDEO
S-VIDEO
STANDBY/ON
BLANK
VIDEO
RGB
SEARCH
AUTO
Press the RGB button on the remote control to select an
input port for RGB signal.
ASPECT
1.
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
STANDBY/ON
OFF
SEARCH
VIDEO
RGB
FREEZE
KEYSTONE
Each time you press the button, the projector switches its
RGB input port as below.
BLANK
ASPECT
AUTO
POSITION
MENU
ENTER
ESC
RESET
RGB IN1
RGB IN2
( 36)
● When the TURN ON is selected to the item SEARCH of OPTION menu
,
the projector selects the RGB IN1 port at first. If no input is detected at the RGB
IN1 port, projector will check the RGB IN2 port.
STANDBY/ON
VIDEO
RGB
SEARCH
Press the VIDEO button on the remote control to select
an input port for video signal.
Each time you press the button, the projector switches its
video input port as below.
ASPECT
AUTO
BLANK
1.
MAGNIFY
ON
HOME
PAGE UP
VOLUME
MUTE
END
PAGE DOWN
STANDBY/ON
BLANK
OFF
SEARCH
AUTO
VIDEO
RGB
FREEZE
KEYSTONE
ASPECT
POSITION
MENU
ENTER
ESC
RESET
COMPONENT VIDEO
S-VIDEO
VIDEO
( 36)
● When the TURN ON is selected to the item SEARCH of OPTION menu
the projector selects the COMPONENT VIDEO port at first. If no input is
,
detected at the COMPONENT VIDEO port, projector will begin to check other
ports.
17
Operating
STANDBY/ON
BLANK
VIDEO
RGB
SEARCH
AUTO
Searching an input signal
ASPECT
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
STANDBY/ON
BLANK
PAGE DOWN
OFF
SEARCH
AUTO
VIDEO
RGB
Press the SEARCH button on the remote control.
1.
FREEZE
KEYSTONE
ASPECT
POSITION
MENU
The projector will begin to check its input ports in order to
find any input signals.
ENTER
ESC
RESET
Then when an input is found, the projector will stop
searching and display the image. If no signal is found, the projector will return
to the state selected before the operation.
RGB IN1
RGB IN2
COMPONENT VIDEO
S-VIDEO
VIDEO
Selecting an aspect ratio
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
1.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
STANDBY/ON
At a RGB signal
NORMAL 4:3
ASPECT
BLANK
SEARCH
AUTO
VIDEO
RGB
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
16:9
BLANK
VOLUME
ASPECT
OFF
FREEZE
KEYSTONE
MAGNIFY
ON
HOME
PAGE UP
POSITION
MENU
ENTER
ESC
RESET
At a video signal /no signal
4:3 16:9 SMALL
● The NORMAL mode keeps the original aspect ratio of the signal.
● At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT VIDEO
input, only 16:9 mode can be selected.
● Performing the automatic adjustment initializes the aspect ratio setting.
Zoom knob
Adjusting the zoom and focus
1. Use the zoom knob to adjust the screen size.
Focus ring
2. Use the focus ring to focus the picture.
18
Operating
STANDBY/ON
BLANK
VIDEO
RGB
SEARCH
AUTO
Using the automatic adjustment feature
STANDBY/ON
ASPECT
SEARCH
AUTO
VIDEO
RGB
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
OFF
BLANK
VOLUME
ASPECT
1. Press the AUTO button on the remote control.
FREEZE
KEYSTONE
POSITION
MENU
MAGNIFY
HOME
PAGE UP
ENTER
ESC
RESET
At a RGB signal
The vertical position, the horizontal position, the clock
phase and horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size prior to
attempting to use this feature. A dark picture may still be incorrectly adjusted.
Use a bright picture when adjusting.
At a video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO mode is selected to the item
(
30)
. For a component video signal,
VIDEO FORMAT of the INPUT menu
the signal type is identified automatically independently of this function.
● The automatic adjustment operation requires approximately 10 seconds. Also
please note that it may not function correctly with some input.
STANDBY/ON
VIDEO
RGB
SEARCH
Adjusting the position
ASPECT
AUTO
BLANK
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
POSITION
MENU
PAGE DOWN
MUTE
Press the POSITION button on the remote control.
OFF
FREEZE
KEYSTONE
1.
ENTER
The “POSITION” indication will appear on the screen.
POSITION
MENU
ENTER
ESC
RESET
Use the cursor buttons ▲/▼/◄/► to adjust the picture
position.
2.
When you want to reset the operation, press the RESET button on the remote
control during the operation.
To complete this operation, press the POSITION button again. Even if you don’t
do anything, the dialog will automatically disappear after a few seconds.
● When this function is performed at a video signal, a certain extra such as a line
may appear outside a picture.
STANDBY/ON
ON
VIDEO
RGB
SEARCH
Correcting the keystone distortions
ASPECT
AUTO
BLANK
PAGE DOWN
MUTE
END
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
OFF
PAGE DOWN
OFF
FREEZE
KEYSTONE
Press the KEYSTONE button on the remote control.
1.
FREEZE
KEYSTONE
POSITION
MENU
A dialog will appear on the screen to aid you in correcting
the distortion.
ENTER
ESC
RESET
2. Use the cursor buttons ▲/▼ to correct the distortion.
To close the dialog and complete this operation, press the KEYSTONE button
again. Even if you don’t do anything, the dialog will automatically disappear
after a few seconds.
● This function may not be work well with some input.
● The adjustable range for correcting will vary among inputs.
19
Operating
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
BLANK
ASPECT
AUTO
Using the magnify feature
ASPECT
BLANK
VOLUME
MAGNIFY
ON
HOME
END
PAGE UP
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
MUTE
Press the ON button of MAGNIFY on the remote control.
OFF
FREEZE
KEYSTONE
1.
PAGE DOWN
The “MAGNIFY” indication will appear on the screen
POSITION
MENU
OFF
ENTER
(although the indication will disappear after several
seconds with no operation.), and the projector will enter the
MAGNIFY mode.
ESC
RESET
2. Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the
zoom area, press the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits the MAGNIFY mode when the input signal
changes, or when an operation of changing the display condition (automatic
adjustment, etc.) is executed.
● Although in the MAGNIFY mode, the keystone distortion condition may vary, it
will be restored when the projector exit the MAGNIFY mode.
STANDBY/ON
VIDEO
RGB
SEARCH
ON
Freezing the screen
ASPECT
AUTO
BLANK
PAGE DOWN
MUTE
END
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
OFF
PAGE DOWN
OFF
FREEZE
KEYSTONE
Press the FREEZE button on the remote control.
1.
FREEZE
KEYSTONE
POSITION
MENU
The “FREEZE” indication will appear on the screen, and
the projector will enter the FREEZE mode.
ENTER
ESC
RESET
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits the FREEZE mode when the input signal
changes, or when one of the projector’s buttons or the remote control buttons
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION and MENU is pressed.
● If the projector continues projecting a still image for long time, the LCD panel
might possibly be printed. Do not leave the projector in FREEZE mode for too
long.
STANDBY/ON
VIDEO
RGB
SEARCH
Temporarily blanking the screen
ASPECT
AUTO
BLANK
STANDBY/ON
SEARCH
AUTO
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
VIDEO
RGB
PAGE DOWN
OFF
Press the BLANK button on the remote control.
1.
FREEZE
KEYSTONE
ASPECT
BLANK
VOLUME
POSITION
MENU
The blank screen will be displayed instead of the screen
of input signal. Please refer to the item BLANK of section
MAGNIFY
HOME
PAGE UP
ENTER
ESC
RESET
(
33).
SCREEN menu
To remove the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when the input
signal changes, or when one of the projector’s buttons or the remote control
buttons are pressed.
20
Operating
Operating the computer screen
CAUTION ►Mistaken use of the mouse/keyboard control could damage
your equipment.
• While using this function, please connect only with a computer.
• Before connecting, read the manuals of the computer you will connect.
NOTE • It may not be possible to control notebook PC, and other computers with
built-in pointing device (e.g. track ball), using this remote control. In this case, before
connecting go into BIOS (system setup) and select external mouse, and disable the
pointing device. In addition, the mouse may not function if the computer does not have
the needed utility program. See your computer’s hardware manual for details.
• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be
possible to use the remote control, depending on the computer’s configurations and
mouse drivers.
• The USB control can be used only for the functions listed below. You cannot do things
like press two buttons at once (for instance, pressing two buttons at the same time to
move the mouse pointer diagonally).
• This function is not available while the lamp is warming up (the POWER indicator
flashes green), and while adjusting the volume and display, correcting for trapezoidal
distortion, zooming in on the screen, using the BLANK function, or displaying the menu
screen.
USB mouse and keyboard control
1. Connect the projector’s USB port to the computer via the mouse cable.
Available function
Remote control operation
Move pointer
Left click with mouse
Right click with mouse
Use ▲, ▼, ◄, ► buttons
Press ENTER button
Press RESET button
Press HOME button
Press END button
Press PAGE UP button
Press PAGE DOWN button
Press ESC button
Press keyboard’s HOME key
Press keyboard’s END key
Press keyboard’s PAGE UP key
Press keyboard’s PAGE DOWN key
Press keyboard’s ESC key
21
Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP,
SCREEN, OPTION and EASY MENU. Each of these menus is operated using the
same methods. The basic operations of these menus are as follows.
STANDBY/ON
VIDEO
RGB
SEARCH
AUTO
LAMP
MENU button
Cursor buttons
ENTER button
RESET button
ASPECT
BLANK
MENU
POSITION
TEMP
MAGNIFY
ON
HOME
END
PAGE UP
VOLUME
MUTE
PAGE DOWN
POWER
OFF
FREEZE
KEYSTONE
ENTER
STANDBY/ON
INPUT
POSITION
MENU
ENTER
RESET
ESC
MENU
ESC
RESET
[
]
MENU RGB
:SELECT
Press the MENU button on the remote control or one of the
cursor buttons on the projector.
The advanced MENU or EASY MENU will appear.
1.
PICTURE
IMAGE
BRIGHT
+0
CONTRAST
GAMMA
+0
INPUT
#1 DEFAULT
SETUP
SCREEN
OPTION
COLOR TEMP
COLOR
LOW
+0
TINT
+0
2. Use the cursor buttons ▲/▼ to select a menu.
EASY MENU
SHARPNESS
+0
PROGRESSIVE TURN OFF
MY MEMORY SAVE 1
At the EASY MENU
Advanced MENU
If you want to change it to the advanced MENU, select the
"Go to Advanced Menu".
EASY MENU
ASPECT
KEYSTONE
MODE
4:3
At the advanced MENU
Select a menu of PICTURE, IMAGE, INPUT, SETUP,
SCREEN or OPTION.
If you want to change it to the EASY MENU, select the
EASY MENU.
+0
NORMAL
+0
BRIGHT
CONTRAST
COLOR
+0
+0
+0
+3
TINT
SHRPNESS
WHISPER
MIRROR
RESET
NORMAL
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to
progress.
NORMAL
3.
FILTER TIME
LANGUAGE
0
ENGLISH
Go To Advance Menu...
The display of the selected menu will be active.
EASY MENU
Use the cursor buttons ▲/▼ to select an item to operate.
4.
Then press the cursor button ► on the projector or remote control, or the
ENTER button on the remote control to progress.
The operation menu of the selected item will appear.
5. Use the cursor buttons▲/▼ to operate the item.
When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that items whose functions are performed
simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset.
When you want to return to the previous display, press the cursor button ◄ on
the projector or remote control, or the ESC button on the remote control.
Press the MENU button on the remote control again to close the menu and
complete this operation.
Even if you don't do anything, the dialog will automatically disappear after about
6.
10 seconds.
22
Multifunctional settings
EASY MENU
EASY Menu
ASPECT
KEYSTONE
MODE
4:3
+0
NORMAL
+0
With the EASY MENU, items shown in the table below can
be performed.
BRIGHT
CONTRAST
COLOR
+0
+0
+0
+3
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
TINT
SHRPNESS
WHISPER
MIRROR
RESET
NORMAL
NORMAL
FILTER TIME
LANGUAGE
0
ENGLISH
Go To Advance Menu...
Item
Description
Using the buttons ◄/► switches the mode for aspect ratio.
ASPECT
See the item ASPECT of section IMAGE menu ( 28).
Using the buttons ◄/► corrects the keystone distortion.
KEYSTONE
See the item KEYSTONE of section SETUP menu ( 32).
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
MODE
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
MODE is “CUSTOM”. Please refer to the items GAMMA ( 25) and
COLOR TEMP ( 26) of PICTURE menu.
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHT of section PICTURE menu ( 25).
BRIGHT
CONTRAST
COLOR
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu
(
25).
Using the buttons ◄/► adjusts the strength of whole color.
See the item COLOR of section PICTURE menu ( 26).
Using the buttons ◄/► adjusts the tint.
See the item TINT of section PICTURE menu ( 26).
TINT
23
Multifunctional settings
EASY Menu (continued)
Item
Description
Using the buttons ◄/► adjusts the sharpness.
See the item SHARPNESS of section PICTURE menu
SHARPNESS
WHISPER
MIRROR
(
26).
Using the buttons ◄/► turns off/on the whisper mode.
See the item WHISPER of section SETUP menu ( 32).
Using the buttons ◄/► switches the mode for mirror status.
See the item MIRROR of section SETUP menu ( 32).
Performing this item resets all of the items of EASY MENU except
FILTER TIME and LANGUAGE.
A dialog is displayed to make sure. Selecting RESET using the
button ▲ performs reset.
RESET
Performing this item resets the filter timer which counts use time of
air filter.
A dialog is displayed to make sure. Selecting RESET using the
button ▲ performs reset.
FILTER TIME
See the item FILTER TIME of section OPTION menu ( 37).
Select the LANGUAGE to toggle the menu language. Refer to
LANGUAGE
Go To
description of LANGUAGE in the SCREEN menu ( 33).
Select the “Go To Advanced Menu” to use the menu of PICTURE,
Advanced Menu IMAGE, INPUT, SETUP, SCREEN or OPTION.
24
Multifunctional settings
PICTURE Menu
[
]
MENU RGB
:SELECT
With the PICTURE menu, items shown in the table below
can be performed.
PICTURE
IMAGE
BRIGHT
+0
CONTRAST
GAMMA
+0
INPUT
#1 DEFAULT
SETUP
SCREEN
OPTION
COLOR TEMP
COLOR
LOW
+0
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
TINT
+0
EASY MENU
SHARPNESS
+0
PROGRESSIVE TURN OFF
MY MEMORY SAVE 1
Item
Description
BRIGHT
Using the buttons ▲/▼ adjusts the brightness. : Light
Using the buttons ▲/▼ adjusts the contrast. : Strong
Using the buttons ▲/▼ switches the GAMMA mode.
Dark
CONTRAST
Weak
#1 DEFAULT
#1 CUSTOM
#2 DEFAULT
#3 CUSTOM
#3 DEFAULT
#2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then
ENTER
:
pressing the button ► or the ENTER button
displays a dialog to aid you in adjusting the
mode.
1
2
3
4
5
6
7
8
This function is useful when you want to
change the brightness of particular tones.
+0 +0 +0 +0 +0 +0 +0 +0
[
]
GAMMA CUSTOM 1
Choose an item using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
GAMMA
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
Eight of equalizing bars corresponds to eight of tone level of test
pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
25
Multifunctional settings
PICTURE Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the mode of color temperature.
HIGH MIDDLE LOW CUSTOM
To adjust CUSTOM
Selecting the CUSTOM and then pressing the
button ► or the ENTER button displays a dialog
to aid you in adjusting the OFFSET and/or GAIN
of CUSTOM mode.
ENTER
:
OFFSET
G
GAIN
G
R
B
R
B
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
+0 +0 +0
+0 +0 +0
COLOR TEMP
COLOR TEMP
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the buttons ◄/►, and adjust the level using
the buttons ▲/▼.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp Gray scale of 15 steps
Using the buttons ▲/▼ adjusts the strength of whole color.
COLOR
Strong
Weak
• This item can be selected only at a video signal.
Using the buttons ▲/▼ adjusts the tint.
Green
Red
TINT
• This item can be selected only at a video signal except for
SECAM.
Using the buttons ▲/▼ adjusts the sharpness.
SHARPNESS
Strong
Weak
26
Multifunctional settings
PICTURE Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the progressive mode.
TV FILM TURN OFF
• This function performs only at an interlaced signal of a VIDEO
input, a S-VIDEO input or a COMPONENT VIDEO input of 525i
(480i) or 625i (576i) signal.
PROGRESSIVE
• When the TV or FILM is selected, the screen image will be crisper.
The FILM mode is adaptable to the 2-3 Pull-Down system to the
conversion. But these may cause a certain defect (for example,
jagged line) of the picture at a quick moving object. In such a case,
please select the TURN OFF, even though the screen image may
lose the crisp.
Selecting a mode of MY MEMORY using the buttons ▲/▼ and then
pressing the button ► or the ENTER button performs each function.
LOAD1
LOAD2
LOAD3
LOAD4
SAVE4 SAVE3
SAVE2
SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on
the memory whose number corresponds with the command’s number,
and adjusts the picture automatically depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current
adjustment data on the memory whose number corresponds with
the command’s number.
MY MEMORY
27
Multifunctional settings
IMAGE Menu
[
]
MENU RGB
:SELECT
With the IMAGE menu, items shown in the table below can
be performed.
PICTURE
IMAGE
ASPECT
4:3
95
OVER SCAN
V POSITION
H POSITION
H PHASE
INPUT
25
SETUP
SCREEN
OPTION
142
16
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
H SIZE
1344
EASY MENU
AUTO ADJUST
Item
Description
Using the buttons ▲/▼ switches the mode for aspect ratio.
At a RGB signal
4:3
16:9 NORMAL
At a video signal / no signal
4:3 16:9 SMALL
ASPECT
• The NORMAL mode keeps the original aspect ratio of the signal.
• At a HDTV signal of 1125i (1080i) or 750p (720p) of COMPONENT
VIDEO input, this item can't be selected.
• Performing the automatic adjustment initializes the aspect ratio
setting.
Using the buttons ▲/▼ adjusts the over-scan ratio.
Large (It reduces picture)
Small (It magnifies picture)
OVER SCAN
• This item can be selected only at a video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the buttons ▲/▼ adjusts the vertical position.
V POSITION
H POSITION
Up
Down
Using the buttons ▲/▼ adjusts the horizontal position.
Left Right
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
flicker.
H PHASE
Right
Left
• This item can be selected only at a RGB signal or a component
video signal.
28
Multifunctional settings
IMAGE Menu (continued)
Item
Description
Using the buttons ▲/▼ adjusts the horizontal size.
Large Small
• This item can be selected only at a RGB signal.
H SIZE
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
pressing the RESET button on the remote control during this
operation.
Selecting this item performs the automatic adjustment feature.
At a RGB signal
The vertical position, the horizontal position, the clock phase and
horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
At a video signal
The video format best suited for the respective input signal will be
selected automatically.
AUTO ADJUST
This function is available only when the AUTO mode is selected to
the item VIDEO FORMAT of INPUT menu. For a component video
signal, the signal type is identified automatically independently of
this function.
• The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.
29
Multifunctional settings
INPUT Menu
[
]
MENU RGB
:SELECT
With the INPUT menu, items shown in the table below can
be performed.
PICTURE
IMAGE
COLOR SPACE AUTO
COMPONENT COMPONENT
VIDEO FORMAT AUTO
INPUT
SETUP
SCREEN
OPTION
FRAME LOCK
INFORMATION
TURN ON
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
EASY MENU
Item
Description
Using the buttons ▲/▼ switches the mode for color space.
AUTO RGB SMPTE240 REC709 REC601
COLOR SPACE
•
This item can be selected only at a RGB signal or a component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select the SMPTE240 or the REC709.
Using the buttons ▲/▼ switches the function of COMPONENT
VIDEO port.
COMPONENT
SCART RGB
COMPONENT
When the SCART RGB is selected, the COMPONENT VIDEO port
function as a port for a SCART RGB signal input. A SCART adapter
and SCART cable realize a SCART RGB input to the projector. For
details, ask your dealer.
Using the buttons ▲/▼ switches the mode for video format.
AUTO
NTSC
PAL SECAM
N-PAL
M-PAL NTSC4.43
• This item performs only at a video signal from the VIDEO port or
the S-VIDEO port. For a component video signal, the signal type is
identified automatically independently of this function.
VIDEO FORMAT
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
Using the buttons ▲/▼ turns the frame lock function on/off.
TURN ON
TURN OFF
• This item performs only at a RGB signal with vertical frequency of
50 to 60 Hz for the models CP-X340 and CP-X345, or 50 to 72Hz
for the model CP-S335.
FRAME LOCK
• When the TURN ON is selected, a moving picture is displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the TURN OFF.
30
Multifunctional settings
INPUT Menu (continued)
Item
Description
Selecting this item displays a dialog titled “INPUT INFORMATION”.
It shows the information about the current input.
INPUT-INFORMATION
RGB
1024x768 @60.0
FRAME LOCK
INPUT-INFORMATION
S-VIDEO
INPUT-INFORMATION
COMPONENT
576i @50
SECAM
AUTO
SCART RGB
• The “FRAME LOCK” message on the dialog means the frame lock
INFORMATION
function is working ( 30).
• The “SCART RGB” message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the item
COMPONENT in this section. ( 30)
• This item is can't be selected at no signal.
31
Multifunctional settings
SETUP Menu
[
]
MENU RGB
:SELECT
With the SETUP menu, items shown in the table below can
be performed.
PICTURE
IMAGE
KEYSTONE
WHISPER
MIRROR
+0
NORMAL
NORMAL
16
INPUT
SETUP
SCREEN
OPTION
VOLUME
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
EASY MENU
Item
Description
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the
item MIRROR, if the projector screen is inclined or if the projector is
angled downward, this function may not work correctly.
KEYSTONE
• When the zoom adjustment is set to the TELE side, this correction
may be excessive. This function should be used with zoom set to
WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL
WHISPER
WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
MIRROR
VOLUME
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High Low
32
Multifunctional settings
SCREEN Menu
[
]
MENU RGB
:SELECT
ENGLISH
With the SCREEN menu, items shown in the table below can
be performed.
PICTURE
IMAGE
LANGUAGE
MENU POSITION
OSD BRIGHT
BLANK
INPUT
5
SETUP
SCREEN
OPTION
BLACK
ORIGINAL
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
START UP
MyScreen
EASY MENU
MyScreen Lock
MESSAGE
TURN OFF
TURN ON
Item
Description
Using the buttons ▲/▼ switches the OSD (On Screen Display)
language.
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
NORSK NEDERLANDS PORTUGUÊS
SVENSKA SUOMI POLSKI
Using the buttons ◄/►/▲/▼ adjusts the menu position.
LANGUAGE
MENU POSITION To quit the operation, press the MENU button on the remote control
or keep no operation for 10 seconds.
Using the buttons ▲/▼ switches the brightness level of the OSD (On
Screen Display).
OSD BRIGHT
Bright Dark
Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is the screen for the temporarily blanking feature
(
20). It is displayed by pressing the BLANK button on the remote
control.
MyScreen
ORIGINAL
BLUE
WHITE
BLACK
BLANK
MyScreen is the screen you can register a desired screen.
ORIGINAL screen is the existing standard screen. BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
• For the MyScreen, please refer to the item MyScreen ( 34).
33
Multifunctional settings
SCREEN Menu (continued)
Item
Description
Using the buttons ▲/▼ switches the mode for the start up screen.
The start up screen is the screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ORIGINAL
TURN OFF
MyScreen is the screen you can register a desired screen.
ORIGINAL screen is the existing standard screen. When the TURN
OFF is selected, the BLUE screen is used.
START UP
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen
About the BLUE, BLACK and BLANK screens, please refer to the
.
below
item BLANK ( 33).
This item functions for capturing the MyScreen of the blank screen
and the start up screen. Please execute displaying the input
including the picture you want to capture.
1. Selecting this item displays a dialog titled “MyScreen”. It will ask
you if you start capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press the
ENTER button on the remote control when the picture is display.
The picture will freeze and the frame for capturing appears.
To stop performing, press the RESET or ESC button on the
remote control.
2. Using the buttons ◄/►/▲/▼ adjust the frame position. Please
move the frame to the position of the picture which you want to
use.
My Screen
To start registration, press the ENTER button on the remote
control.
To restore the screen and return to the previous dialog, press the
RESET or ESC button on the remote control.
Registration takes several minutes. When the registration is
completed, the registered screen and the message “MyScreen
registration is finished.” are displayed for several seconds. If the
registration failed, the message “A capturing error has occurred.
Please try again.” is displayed.
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON
TURN OFF
My Screen Lock
When the TURN ON is selected, the item MyScreen cannot be
performed. Use this function for protecting the current MyScreen.
34
Multifunctional settings
SCREEN Menu (continued)
Item
Description
Using the buttons ▲/▼ turns on/off the message function.
TURN ON TURN OFF
When the TURN ON is selected, the following message function
works.
“AUTO IN PROGRESS” while automatically adjusting
”NO INPUT IS DETECTED”
MESSAGE
”SYNC IS OUT OF RANGE”
”Searching ....” while searching for an input signal
”Detecting….” when an input signal is detected
The indication of the input signal by changing
The indication of the aspect ration by changing
35
Multifunctional settings
OPTION Menu
[
]
MENU RGB
:SELECT
With the OPTION menu, items shown in the table below can
be performed.
PICTURE
IMAGE
SEARCH
TURN ON
AUTO OFF
LAMP TIME
FILTER TIME
SERVICE
0
0
0
INPUT
Select an item using the cursor buttons ▲/▼ on the projector
or remote control, and press the cursor button ► on the
projector or remote control, or the ENTER button on the
remote control to progress, except for the items LAMP TIME
and FILTER TIME. Then perform it referring to the following
table.
SETUP
SCREEN
OPTION
EASY MENU
Item
Description
Using the buttons ▲/▼ turns on/off the automatic signal search
function.
TURN ON
TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in order of following. Then when an input
is found, the projector will stop searching and display the image.
SEARCH
RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO
Using the buttons ▲/▼ adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
AUTO OFF
DISABLE
1
0
AUTO OFF
When the time is set to 0, the projector is not turned off
automatically.
When the time is set to 1 to 99, and when the passed time with
a no-signal or an unsuitable signal reaches at the set time, the
projector lamp will go off and the power indicator begins blinking.
Please refer to the section “Turning off the power” ( 16).
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the use time of the lamp.
Pressing the RESET button on the remote control for about 3
seconds displays a dialog. To reset the lamp time, select the
RESET using the button ▲.
LAMP TIME
RESET CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for correct messages about the lamp.
• About the lamp replacement, please see the section "Lamp" (
38, 39).
36
Multifunctional settings
OPTION Menu (continued)
Item
Description
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the air filter.
Pressing the RESET button on the remote control for about 3
seconds displays a dialog. To reset the filter time, select the RESET
using the button ▲.
FILTER TIME
RESET CANCEL
• Please reset the filter time only when you have cleaned or
replaced the air filter, for correct messages about the air filter.
• About the caring the air filter, please see the section "Air filter" (
40).
Selecting this item displays the SERVICE menu.
Select an item using the buttons ▲/▼, and press the button ► or
the ENTER button on the remote control to progress.
FAN SPEED
GHOST
FACTORY RESET
FAN SPEED
Using the buttons ▲/▼ switches the rotation speed of the cooling
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH
NORMAL
SERVICE
GHOST
1. Select a color element of ghost using the buttons ◄/►.
2. Adjust the selected element using the buttons ▲/▼ to disappear
ghost.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this
function, all the items in all of menu will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME and
LANGUAGE are not reset.
RESET CANCEL
37
Maintenance
Maintenance
Lamp
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
WARNING
►The projector uses a high-pressure mercury glass lamp. The lamp can break
with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn
over time. Note that each lamp has a different lifetime, and some may burst or
burn out soon after you start using them. In addition, when the bulb bursts, it is
possible for shards of glass to fly into the lamp housing, and for gas containing
mercury to escape from the projector’s vent holes.
►About disposal of a lamp • This product contains a mercury lamp; do not
put in trash. Dispose of in accord with environmental laws.
For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does),
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
Disconnect
the plug
from the
power
• If the lamp should break (it will make a loud bang when it does),
ventilate the room well, and make sure not to breathe the gas that
comes out of the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, turn the projector off and unplug the power
outlet
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the
lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from
above. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible
that there are electrical problems elsewhere besides the lamp. If this
happens, contact your local dealer or a service representative.
•
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• If the indicators or a message prompts you to replace the lamp (see
the section "Related Messages" and "Regarding the indicator Lamps"),
replace the lamp as soon as possible. Using the lamp for long periods
of time, or past the replacement date, could cause it to burst. Do not
use old (used) lamps; this is a cause of breakage.
38
Maintenance
Lamp (continued)
When the indicators or a message prompts you to replace the lamp, replace the
lamp as soon as possible.
Turn the projector off, and unplug the power cord. Allow the lamp to cool for
at least 45 minutes.
1.
To prepare a new lamp, contact your dealer and tell the lamp type number
= DT00671. If the projector is mounted on the ceiling, or if the lamp has
2.
broken, also ask the dealer to replace the lamp.
Lamp cover
In the case of replacement by yourself,
After making sure that the projector has
3.
cooled adequately, slowly turn over the
projector, so that the bottom is facing up.
Claws
Please unhook the claws of the lamp cover
using a minus screwdriver or similar, and
remove the lamp cover.
Screws marked
4.
by arrow
Loosen the 2 screws (marked by arrow) of
the lamp, and slowly pick up the lamp by the
handles.
5.
Insert the new lamp, and retighten firmly two
screws that are loosened in the previous
process to lock it in place.
6.
Interlocking the 2 tabs of the lamp cover to
7.
the projector, position the lamp cover on the
projector. Then push the center point of two
claws to fix the lamp cover.
Tabs
Slowly turn the projector so that the top is
facing up.
Center point
of claws
8.
Turn the projector on, and reset the lamp time
using the LAMP TIME function of OPTION
9.
(
36)
.
menu
Claws
NOTE • When the lamp has been replaced after the message of "THE
POWER WILL TURN OFF AFTER 0hr." is displayed, complete the following
operation within 10 minutes of switching power on.
• Incorrectly resetting of the lamp timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
39
Maintenance
Air filter
WARNING ►Before caring, make sure the power switch is off and the
power cable is not plugged in, then allow the projector to cool sufficiently. The
care in a high temperature state of the projector could cause a burn and/or
malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector with the
air filter and filter cover removed.
►Avoid wetting the projector or inserting liquids in the projector. It could result
in a fire, an electric shock, and and/or malfunction to the projector.
CAUTION ►Please replace the air filter when it is damaged or too soiled,
and also when you replace the lamp.
When the indicators or a message prompts you to clean the air filter, clean the air filter as
soon as possible. If the air filter becomes clogged by dust or the like, internal temperatures
rise and the power may be automatically turned off for malfunction prevention.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes. And
prepare a vacuum cleaner.
Filter cover’s knob
1.
After making sure that the projector is cool adequately,
2.
slowly turn the projector so that the lens-side is facing
up. Please be careful for a projector not to fall. While the
projector is placed lens-side up, hold the projector.
Putting a finger on the filter cover’s knob, slide the
filter cover in the direction of the arrow to remove it.
Filter cover
Air filter’s knob
3.
4. Holding the air filter’s knob, pull the air filter off.
Apply a vacuum cleaner to the vent of the projector for the
air filter. And then slowly turn the projector bottom up.
5.
Apply a vacuum cleaner to the air filter and filter cover.
6.
Please replace the air filter when it is damaged or too soiled.
To prepare a new air filter, contact your dealer and tell the air
Air filter
filter type number = NJ09702.
An air filter of specified type will come even with the replacement lamp for this projector.
Position the cleaned air filter or a new air filter into place, and push the points
of "PUSH" word with claws to fix the air filter.
7.
8. Replace the filter cover and snap it back into place.
9. Slowly turn the projector so that the top is facing up.
Turn the projector on, and reset the filter time using the FILTER TIME
10.
(
37)
.
function of OPTION menu
NOTE • Incorrectly resetting of the filter timer (resetting without replacement,
or neglect of resetting after replacement) will result in incorrect message
functions.
40
Maintenance
Other care
WARNING ►Before caring, make sure the power switch is off and the
power cable is not plugged in, and then allow the projector to cool sufficiently.
The care in a high temperature state of the projector could cause a burn and/or
malfunction to the projector.
►Never try to care for the inside of the projector personally. Doing is so
dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result
in a fire, an electric shock, and/or malfunction to the projector.
• Don’t put a container containing water, cleaner or chemicals near the
projector.
• Don’t use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every 2 years.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display
quality. Please take care of the lens, being cautious of the handling.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint,
etc.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufficiently.
1.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,
and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
2.
41
Troubleshooting
Troubleshooting
Related messages
When the unit's power is on, messages such as those shown below may be
displayed. When any such message is displayed on the screen, please respond
as described below. If the same message is displayed after the treatment, or if a
message other than the following appears, please contact your dealer or service
company.
Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message
Description
The time the lamp timer has counted is approaching
2000 hours.
CHANGE THE LAMP
Preparation of a new lamp, and an early lamp change is
recommended. After you have change the lamp, please be
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
sure to reset the lamp timer ( 36).
The time the lamp timer has counted is approaching
2000 hours, so a lamp change within ** hours is
recommended.
When lamp usage reaches 2000 hours, the power will
automatically be turned off. Please change the lamp by
referring to the section “Lamp”. After you have changed the
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER ** hr.
lamp, please be sure to reset the lamp timer ( 36).
CHANGE THE LAMP
As the time the lamp timer has counted has reached
2000 hours, the power will soon be automatically
turned off.
Please immediately turn the power off, and change the lamp
by referring to the section “Lamp”. After changing the lamp,
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER 0 hr.
please be sure to reset the lamp timer ( 36).
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
NO INPUT IS DETECTED
ON ***
The horizontal or vertical wavelength of the inputted
signal is outside of the response parameters of this unit.
Please confirm the specs for this unit or the signal source specs.
SYNC IS OUT OF RANGE
ON *** fH *****kHz fV *****Hz
The internal portion temperature is rising.
Please turn the power OFF, and allow the unit to cool down at least 20 minutes.
After having confirmed the following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
CHECK THE AIR FLOW
• Does the peripheral temperature exceed 35°C?
•
If the same indication is displayed after the treatment, please set the
HIGH at the FAN SPEED of the item SERVICE of the OPTION menu.
42
Troubleshooting
Related messages (continued)
Message
Description
CLEAN THE AIR FILTER
A note of precaution when cleaning the air filter.
Please immediately turn the power OFF, and clean or
change the air filter by referring to the “Air Filter” section of
this manual. After you have cleaned or changed the air filter,
POWER OFF FIRST,
THEN CLEAN THE AIR
FILTER.
AFTER CLEANING THE AIR
FILTER,
please be sure to reset the filter timer ( 37).
RESET THE FILTER TIMER.
NOTE • A lamp has a finite product life. Lamps are characterized by the
fact that, after long hours of usage, a lamp will no longer light up, or the lamp
will break or burst, etc. This projector is equipped with an automatic shut-down
function, such that the power will automatically be turned off when lamp usage
time has reached 2000 hours. Please be aware, however, that among lamp
types, there are major differences in product lifetimes; a lamp may thus fail to
light even prior to the functioning of the automatic shut-down function of this
projector.
43
Troubleshooting
Regarding the indicator lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP
indicator have the meanings as described in the table below. Please respond
in accordance with the instructions within the table. If the same indication is
displayed after the treatment, or if an indication other than the following is
displayed, please contact your dealer or service company.
POWER
indicator indicator indicator
LAMP
TEMP
Description
Lighting
In Orange
Turned
off
Turned
off
The projector is in a standby state.
Please refer to the section “Power On/Off”.
Blinking
In Green
Turned
off
Turned
off
The projector is warming up.
Please wait.
Lighting
In Green
Turned
off
Turned
off
The projector is in an on state.
Ordinary operations may be performed.
Blinking
In Orange
Turned
off
Turned
off
The projector is cooling down.
Please wait.
The projector is cooling down. A certain error
has been detected.
Please wait until the POWER indicator finishes blink,
and then perform the proper response measure using
the item descriptions below as reference.
Blinking
In Red
(discre- (discre-
tionary) tionary)
The lamp does not light, and there is a
possibility that interior portion has become
heated.
Please turn the power off, and allow the unit to cool
down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
Blinking
In Red
or
Lighting
In Red
Lighting Turned
In Red
off
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treatment,
please change the lamp by referring to the section
“Lamp”.
The lamp cover has not been properly fixed
(attached).
Please turn the power off, and allow the unit to cool
down at least 45 minutes. After the projector has
Blinking Turned sufficiently cooled down, please make confirmation
Blinking
In Red
or
Lighting
In Red
In Red
off
of the attachment state of the lamp cover. After
performing any needed maintenance, turn the power
on again. If the same indication is displayed after
the treatment, please contact your dealer or service
company.
44
Troubleshooting
Regarding the indicator lamps (continued)
POWER
indicator indicator indicator
LAMP
TEMP
Description
The cooling fan is not operating.
Please turn the power off, and allow the unit to cool
down at least 20 minutes. After the projector has
Turned Blinking sufficiently cooled down, please make confirmation
Blinking
In Red
or
Lighting
In Red
off
In Red that no foreign matter has become caught in the fan,
etc., and then turn the power on again.
If the same indication is displayed after the treatment,
please contact your dealer or service company.
There is a possibility that the interior portion
has become heated.
Please turn the power off, and allow the unit to cool
down at least 20 minutes. After the projector has
sufficiently cooled down, please make confirmation of
Blinking
In Red
or
Lighting
In Red
Turned Lighting the following items, and then turn the power on again.
off
In Red • Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after the treatment,
please set the HIGH at the FAN SPEED of the item
SERVICE of the OPTION menu.
There is a possibility that the interior portion
has become overcooled.
Please use the unit within the usage temperature
parameters (5°C to 35°C). After the treatment, resent
the power to ON.
Lighting
In Green
Alternative
blinking in Red
It is time to clean the air filter.
Please immediately turn the power OFF, and clean
or change the air filter by referring to the section “Air
Filter”. After cleaning or changed the air filter, please
be sure to reset the filter timer. After the treatment,
resent the power to ON.
Lighting
In Green
Simultaneous
blinking in Red
NOTE • When the interior portion has become overheated, for safety
purposes, the power source is automatically turned off, and the indicator lamps
may also be turned off. In such a case, press the “” (OFF) side of the power
switch, and wait at least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of the lamp and lamp
cover, and then turn the power on again.
45
Troubleshooting
Phenomena that may easily be mistaken for machine defects
WARNING ►Never use the projector if abnormal operations such as
smoke, strange odor, excessive sound, damaged casing or elements or cables,
penetration of liquids or foreign matter, etc. should occur. In such cases,
immediately turn off the power switch and then disconnect the power plug from
the power outlet. After making sure that the smoke or odor has stopped, contact
your dealer or service company.
Before requesting repair, please check in accordance with the following chart.
This operation sometimes resolves your problem.
1.
If the situation cannot be corrected,
The projector’s microprocessor may need to be reset. Please push the
Restart switch by using a cocktail stick or similar and the projector will restart.
2.
Some setting may be wrong. Please use the FACTORY RESET function of
3.
(
37)
to reset all settings to factory
SERVICE menu in the OPTION menu
default.
Then, if the problem is not removed after maintenance, please contact your dealer
or service company.
Reference
page
Phenomenon
Cases not involving a machine defect
The electrical power cord is not plugged in.
Correctly connect the power cord.
13
The power switch is not set to the on position.
Set the power switch to [ | ] (On).
16
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Please turn the power off, and allow the unit to cool down at
least 20 minutes. After the projector has sufficiently cooled
down, please turn the power on again.
16
Power does not
come on.
Either there is no lamp and/or lamp cover, or either
of these has not been properly fixed.
Please turn the power off, and allow the unit to cool down at
least 45 minutes. After the projector has sufficiently cooled
down, please make confirmation of the attachment state of
the lamp and lamp cover, and then turn the power on again.
38, 39
46
Troubleshooting
Phenomena that may easily be mistaken for machine defects (continued)
Reference
Phenomenon
Cases not involving a machine defect
page
The lens cover is closed.
Remove the lens cover.
4, 16
The signal cables are not correctly connected.
Correctly connect the connection cables.
10
The brightness is adjusted to an extremely low level.
Adjust the BRIGHT to a higher level using the menu function 23, 25
or the remote control.
No pictures are
displayed.
The computer cannot detect the projector as a plug
and play monitor.
Make sure that the computer’s can detect a plug and play
10
monitor using other plug and play monitor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR
TEMP, COLOR, TINT and/or COLOR SPACE settings,
using the menu functions.
23, 25,
30
Colors have a
faded- out
appearance, or
Color tone is
poor.
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB,
SMPTE240 , REC709 or REC601.
30
The brightness and/or contrast are adjusted to an
extremely low level.
Adjust the BRIGHT and/or CONTRAST settings to a higher
level using the menu function.
24, 25
Pictures appear
dark.
The WHISPER function is working.
Select the NORMAL to the item WHISPER in the SETUP
menu.
24, 32
38, 39
The lamp is approaching the end of its product
lifetime.
Replace the lamp.
Either the focus and/or horizontal phase settings are
not properly.
Adjust the focus using the focus ring, and/or H PHASE
using the menu function.
18, 28
41
Pictures appear
blurry.
The lens is dirty or misty.
Clean the lens by referring to the section “Caring for the
lens”.
NOTE • Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and such do not constitute or
imply a machine defect.
47
Warranty And After-Service
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and
run through the suggested checks. If this does not resolve the problem, please
contact your dealer or the service company. They will tell you what warranty
condition is applied.
Specifications
Specifications
NOTE • This specifications are subject to change without notice.
Item
Specification
Product name
Liquid crystal projector
1.8 cm (0.7 type)
Panel size
Liquid
Crystal
panel
Drive system TFT active matrix
CP-S335: 480,000 pixels (800 horizontal x 600 vertical)
Pixels
CP-X340/X345: 786,432 pixels (1024 horizontal x 768 vertical)
Lens
Zoom lens F=1.7 ~ 1.9 f=21.8 ~ 26.2 mm
165W UHB
Lamp
Power Supply
AC100-120V/2.7A, AC220-240V/1.5A
240W
Power Consumption
Temperature range
5 ~ 35°C (Operating)
297 (W) x 64 (H) x 233 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
Size
Weight (mass)
2.5 kg
RGB input:
Video input:
RGB IN1..D-sub 15pin mini x1 COMPONENT VIDEO
RGB IN2..D-sub 15pin mini x1
Y............................... RCA x1
CB/PB....................... RCA x 1
CR/PR ...................... RCA x 1
S-Video ................................ 1
Video .................................... 1
RGB output:
RGB OUT D-sub 15pin mini x1
Communication port:
CONTROL............D-sub 9pin x1
USB....................... USB(B) x1
Ports
Audio input:
AUDIO IN1 ...... Stereo mini x1
AUDIO IN2 ...... Stereo mini x1
Audio output:
AUDIO OUT ... Stereo mini x1
Lamp
DT00671
Optional
Air filter
parts
NJ09702
Others
• Please consult your dealer.
48
Specifications
Specifications (continued)
84.5
297.0
[unit: mm]
49
|
