Projector
CP-X8170/CP-WX8265/CP-WU8460
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING Ź%HIRUHꢀXVLQJꢀWKLVꢀSURGXFWꢁꢀEHꢀVXUHꢀWRꢀUHDGꢀDOOꢀPDQXDOVꢀIRUꢀWKLVꢀ
product. After reading them, store them in a safe place for future reference.
Ź+HHGꢀDOOꢀWKHꢀZDUQLQJVꢀDQGꢀFDXWLRQVꢀLQꢀWKHꢀPDQXDOVꢀRUꢀRQꢀWKHꢀSURGXFWꢂ
Ź)ROORZꢀDOOꢀWKHꢀLQVWUXFWLRQVꢀLQꢀWKHꢀPDQXDOVꢀRUꢀRQꢀWKHꢀSURGXFWꢂ
NOTEꢀꢀ‡ꢀ,QꢀWKLVꢀPDQXDOꢁꢀXQOHVVꢀDQ\ꢀFRPPHQWVꢀDUHꢀDFFRPSDQLHGꢁꢀ³WKHꢀ
PDQXDOV´ꢀPHDQVꢀDOOꢀWKHꢀGRFXPHQWVꢀSURYLGHGꢀZLWKꢀWKLVꢀSURGXFWꢁꢀDQGꢀ³WKHꢀSURGXFW´ꢀ
means this projector and all the accessories came with the projector.
Contents
)LUVWꢀRIꢀDOO............................................ 2 Connecting power supply................... 8
Entries and graphical symbols explanation......2
Turning on the power.......................... 9
Adjusting the projector's elevator ..... 10
Important safety instruction ..............................2
Regulatory notices.............................. 3 Adjusting the lens position................ 10
About Electro-Magnetic Interference................3
Displaying the picture....................... 11
Turning off the power........................ 12
About Waste Electrical and Electronic Equipment...4
Contents of package........................... 4 Replacing the lamp........................... 13
Preparing for the remote control......... 5 &OHDQLQJꢀDQGꢀUHSODFLQJꢀWKHꢀDLUꢀ¿OWHU .. 15
Arrangement....................................... 6 Using the CD manual ....................... 17
Connecting with your devices............. 7 6SHFL¿FDWLRQV ................................... 18
)DVWHQLQJꢀWKHꢀDGDSWHUꢀFRYHU............... 8 Troubleshooting
- Warranty and after-service........... 20
1
Regulatory notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
This product may cause interference if used in residential areas. Such use must
be avoided unless the user takes special measures to reduce electromagnetic
emissions to prevent interference to the reception of radio and television
broadcasts.
In Canada
This Class A digital apparatus complies with Canadian ICES-003.
In the US and places where the FCC regulations are applicable
7KLVꢀGHYLFHꢀFRPSOLHVꢀZLWKꢀSDUWꢀꢃꢄꢀRIꢀWKHꢀ)&&ꢀ5XOHVꢂꢀ2SHUDWLRQꢀLVꢀVXEMHFWꢀ
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
&ODVVꢀ$ꢀGLJLWDOꢀGHYLFHꢁꢀSXUVXDQWꢀWRꢀ3DUWꢀꢃꢄꢀRIꢀWKHꢀ)&&ꢀ5XOHVꢂꢀ
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to case harmful interference in which case the user will be required to
correct the interference at his own expense.
INSTRUCTIONS TO USERS: Some cables have to be used with the core set.
8VHꢀWKHꢀDFFHVVRU\ꢀFDEOHꢀRUꢀDꢀGHVLJQDWHGꢀW\SHꢀFDEOHꢀIRUꢀWKHꢀFRQQHFWLRQꢂꢀ)RUꢀFDEOHVꢀ
that have a core only at one end, connect the core to the projector.
CAUTION: &KDQJHVꢀRUꢀPRGL¿FDWLRQVꢀQRWꢀH[SUHVVO\ꢀDSSURYHGꢀE\ꢀWKHꢀSDUW\ꢀ
responsible for compliance could void the user’s authority to operate the
equipment.
3
Regulatory notices (continued)
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment
including any spent or discarded batteries or accumulators as unsorted
municipal waste, but use the return and collection systems available.
If the batteries or accumulators included with this equipment, display
the chemical symbol Hg, Cd, or Pb, then it means that the battery has a
heavy metal content of more than 0.0005% Mercury or more than, 0.002%
Cadmium, or more than 0.004% Lead.
Contents of package
(4)
(1)
Your projector should come with the items
shown below. Check that all the items are
included. Require of your dealer immediately if
any items are missing.
(5)
(1) Remote control with two AA batteries
(2) Power cord
(3) Computer cable
(4) Lens cover
ꢅꢄꢆꢀꢀ8VHU¶VꢀPDQXDOVꢀꢅ%RRNꢀ[ꢃꢁꢀ&'ꢀ[ꢃꢆ
(6) Security label
(2)
(3)
(6)
(7)
(7) Application CD
(8) Adapter cover
(8)
WARNING Ź.HHSꢀVPDOOꢀSDUWVꢀDZD\ꢀIURPꢀFKLOGUHQꢀDQGꢀSHWVꢂꢀ7DNHꢀFDUHꢀ
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
NOTEꢀꢀ‡ꢀ.HHSꢀWKHꢀRULJLQDOꢀSDFNLQJꢀPDWHULDOVꢀIRUꢀIXWXUHꢀUHVKLSPHQWꢂꢀ%HꢀVXUHꢀ
to use the original packing materials when moving the projector. Use special
caution for the lens.
‡ꢀ7KHꢀSURMHFWRUꢀPD\ꢀPDNHꢀDꢀUDWWOLQJꢀVRXQGꢀZKHQꢀWLOWHGꢁꢀPRYHGꢀRUꢀVKDNHQꢁꢀVLQFHꢀ
DꢀÀDSꢀWRꢀFRQWUROꢀWKHꢀDLUꢀÀRZꢀLQVLGHꢀRIꢀWKHꢀSURMHFWRUꢀKDVꢀPRYHGꢂꢀ%HꢀDZDUHꢀWKDWꢀ
this is not a failure or malfunction.
4
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1
3
Holding the hook part of the battery
cover, remove it.
1.
2.
Align and insert the two AA batteries
(HITACHI MAXELL ENERGY, Part
No.LR6 or R6P) according to their plus
and minus terminals as indicated in the
remote control.
2
Replace the battery cover in the direction of the arrow
and snap it back into place.
3.
WARNING ŹAlways handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
ZKLFKꢀFRXOGꢀUHVXOWꢀLQꢀ¿UHꢁꢀLQMXU\ꢀDQGꢇRUꢀSROOXWLRQꢀRIꢀWKHꢀVXUURXQGLQJꢀHQYLURQPHQWꢂ
‡ꢀWhen replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
‡ꢀ%HꢀVXUHꢀWRꢀXVHꢀRQO\ꢀWKHꢀEDWWHULHVꢀVSHFL¿HGꢂꢀ'RꢀQRWꢀXVHꢀEDWWHULHVꢀRIꢀGLIIHUHQWꢀ
types at the same time. Do not mix a new battery with used one.
‡ꢀMake sure the plus and minus terminals are correctly aligned when loading a battery.
‡ꢀ.HHSꢀDꢀEDWWHU\ꢀDZD\ꢀIURPꢀFKLOGUHQꢀDQGꢀSHWVꢂ
‡ꢀDo not recharge, short circuit, solder or disassemble a battery.
‡ꢀ'RꢀQRWꢀSODFHꢀDꢀEDWWHU\ꢀLQꢀDꢀ¿UHꢀRUꢀZDWHUꢂꢀ.HHSꢀEDWWHULHVꢀLQꢀDꢀGDUNꢁꢀFRROꢀDQGꢀGU\ꢀSODFHꢂ
‡ꢀIf you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
‡ꢀObey the local laws on disposing the battery.
5
Arrangement
Refer to tables T-1 to T-3 at the back of this manual as well as the following to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
Screen size
Ⓗ × Ⓥ :
Projection distance
(from the front of the
projector unit)
ⓐ :
Projector top
,
: Screen height
ⓑ ⓒ
Projector bottom
WARNING ŹInstall the projector where you can access the power outlet
easily.
ŹInstall the projector in a stable horizontal position.
‡ꢀ'RꢀQRWꢀXVHꢀDQ\ꢀPRXQWLQJꢀDFFHVVRULHVꢀH[FHSWꢀWKHꢀDFFHVVRULHVꢀVSHFL¿HGꢀE\ꢀWKHꢀ
manufacturer. Read and keep the manuals of the accessories used.
‡ꢀ)RUꢀVSHFLDOꢀLQVWDOODWLRQꢀVXFKꢀDVꢀFHLOLQJꢀPRXQWLQJꢁꢀEHꢀVXUHꢀWRꢀFRQVXOWꢀ\RXUꢀ
GHDOHUꢀEHIRUHKDQGꢂꢀ6SHFL¿FꢀPRXQWLQJꢀDFFHVVRULHVꢀDQGꢀVHUYLFHVꢀPD\ꢀEHꢀ
required.
‡ꢀ'RꢀQRWꢀSXWꢀWKHꢀSURMHFWRUꢀRQꢀLWVꢀVLGHꢁꢀIURQWꢀRUꢀUHDUꢀSRVLWLRQꢂ
‡ꢀ'ꢀ RꢀQRWꢀDWWDFKꢀQRUꢀSODFHꢀDQ\WKLQJꢀRQꢀWKHꢀSURMHFWRUꢀXQOHVVꢀRWKHUZLVHꢀVSHFL¿HGꢀ
in the manual.
Ź'RꢀQRWꢀLQVWDOOꢀWKHꢀSURMHFWRUꢀQHDUꢀWKHUPDOO\ꢀFRQGXFWLYHꢀRUꢀÀDPPDEOHꢀWKLQJVꢂ
ŹDo not place the projector where any oils, such as cooking or machine oil, are
used.
ŹDo not place the projector in a place where it may get wet.
CAUTION Ź3ODFHꢀWKHꢀSURMHFWRUꢀLQꢀDꢀFRROꢀSODFHꢀZLWKꢀVXI¿FLHQWꢀYHQWLODWLRQꢂ
‡ꢀ.HHSꢀDꢀVSDFHꢀRIꢀꢈꢉꢀFPꢀRUꢀPRUHꢀEHWZHHQꢀDꢀVLGHꢀRIꢀWKHꢀSURMHFWRUꢀDQGꢀRWKHUꢀ
objects such as walls.
‡ꢀDo not stop up, block nor cover the projector's vent holes.
‡ꢀ'RꢀQRWꢀSODFHꢀWKHꢀSURMHFWRUꢀDWꢀSODFHVꢀWKDWꢀDUHꢀH[SRVHGꢀWRꢀPDJQHWLFꢀ¿HOGVꢁꢀGRLQJꢀ
so can cause the cooling fans inside the projector to malfunction.
ŹAvoid placing the projector in smoky, humid or dusty place.
‡ꢀ'RꢀQRWꢀSODFHꢀWKHꢀSURMHFWRUꢀQHDUꢀKXPLGL¿HUVꢂꢀ
NOTICE Ź3RVLWLRQꢀWKHꢀSURMHFWRUꢀWRꢀSUHYHQWꢀOLJKWꢀIURPꢀGLUHFWO\ꢀKLWWLQJꢀWKHꢀ
projector’s remote sensor.
Ź'RꢀQRWꢀSODFHꢀWKHꢀSURGXFWꢀLQꢀDꢀSODFHꢀZKHUHꢀUDGLRꢀLQWHUIHUHQFHꢀPD\ꢀEHꢀFDXVHGꢂ
ŹSet the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is
recommended to leave it at AUTO usually. If the projector is used with a wrong
setting, it may cause damage to the projector itself or the parts inside.ꢀ)RUꢀ
details, see User’s Manual -Operating Guide.
6
Connecting with your devices
%HIRUHꢀFRQQHFWLQJꢀWKHꢀSURMHFWRUꢀWRꢀDꢀGHYLFHꢁꢀFRQVXOWꢀWKHꢀPDQXDOꢀRIꢀWKHꢀGHYLFHꢀWRꢀ
FRQ¿UPꢀWKDWꢀWKHꢀGHYLFHꢀLVꢀVXLWDEOHꢀIRUꢀFRQQHFWLQJꢀZLWKꢀWKLVꢀSURMHFWRUꢀDQGꢀSUHSDUHꢀ
the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the
FRQQHFWLRQꢁꢀDFFRUGLQJꢀWRꢀWKHꢀIROORZLQJꢀLQVWUXFWLRQVꢂꢀ5HIHUꢀWRꢀ¿gures F-1 to F-4 at the
back of this manual.
)RUꢀGHWDLOVꢁꢀVHHꢀUser’s Manual - Operating Guideꢂꢀ%HIRUHꢀFRQQHFWLQJꢀWKHꢀSURMHFWRUꢀ
to a network system, be sure to read User’s Manual - Network Guide too.
WARNING Ź8VHꢀRQO\ꢀWKHꢀDSSURSULDWHꢀDFFHVVRULHVꢂꢀ2WKHUZLVHꢀLWꢀFRXOGꢀ
FDXVHꢀDꢀ¿UHꢀRUꢀGDPDJHꢀWKHꢀSURMHFWRUꢀDQGꢀGHYLFHVꢂ
‡ꢀ8ꢀ VHꢀRQO\ꢀWKHꢀDFFHVVRULHVꢀVSHFL¿HGꢀRUꢀUHFRPPHQGHGꢀE\ꢀWKHꢀSURMHFWRU¶Vꢀ
manufacturer. It may be regulated under some standard.
‡ꢀ1ꢀ HLWKHUꢀGLVDVVHPEOHꢀQRUꢀPRGLI\ꢀWKHꢀSURMHFWRUꢀDQGꢀWKHꢀDFFHVVRULHVꢂ
‡ꢀ'ꢀ RꢀQRWꢀXVHꢀWKHꢀGDPDJHGꢀDFFHVVRU\ꢂꢀ%HꢀFDUHIXOꢀQRWꢀWRꢀGDPDJHꢀWKHꢀDFFHVVR-
ries. Route a cable so that it is neither stepped on nor pinched out.
Ź+HDWꢀPD\ꢀEXLOGꢀXSꢀLQꢀWKHꢀ86%ꢀZLUHOHVVꢀDGDSWHUꢁꢀWRꢀDYRLGꢀSRVVLEOHꢀEXUQVꢀGLV-
connect the projector power cord for 10 minutes before touching the adapter.
‡ꢀ:ꢀ KHQꢀXVLQJꢀWKHꢀ86%ꢀZLUHOHVVꢀDGDSWHUꢁꢀEHꢀVXUHꢀWRꢀFRQQHFWꢀWKHꢀDGDSWHUꢀWRꢀWKHꢀ
further USB TYPE A port from the LAN port and use the supplied adapter
cover ( 8).
CAUTION Ź)RUꢀDꢀFDEOHꢀZLWKꢀDꢀFRUHꢀDWꢀRQO\ꢀRQHꢀHQGꢁꢀFRQQHFWꢀWKHꢀHQGꢀZLWKꢀ
the core to the projector. That may be required by EMI regulations.
Ź%HIRUHꢀFRQQHFWLQJꢀWKHꢀSURMHFWRUꢀWRꢀDꢀQHWZRUNꢀV\VWHPꢀEHꢀVXUHꢀWRꢀREWDLQꢀWKHꢀ
consent of the administrator of the network.
ŹDo not connect the LAN port to any network that might have the excessive
voltage.
Ź
7KHꢀGHVLJQDWHGꢀ86%ꢀZLUHOHVVꢀDGDSWHUꢀWKDWꢀLVꢀVROGꢀDVꢀDQꢀRSWLRQꢀLVꢀUHTXLUHGꢀWRꢀXVHꢀ
WKHꢀZLUHOHVVꢀQHWZRUNꢀIXQFWLRQꢀRIꢀWKLVꢀSURMHFWRUꢂꢀ%HIRUHꢀFRQQHFWLQJꢀWKHꢀ86%ꢀZLUHOHVVꢀ
adapter, turn off the power of the projector and disconnect the power cord.
Ź%HIRUHꢀUHPRYLQJꢀWKHꢀ86%ꢀVWRUDJHꢀGHYLFHꢀIURPꢀWKHꢀSRUWꢀRIꢀWKHꢀSURMHFWRUꢁꢀEHꢀVXUHꢀ
WRꢀXVHꢀWKHꢀ5(029(ꢀ86%ꢀIXQFWLRQꢀRQꢀWKHꢀWKXPEQDLOꢀVFUHHQꢀWRꢀVHFXUHꢀ\RXUꢀGDWDꢂꢀ
NOTE ‡ꢀ'RꢀQRWꢀWXUQꢀRQꢀRUꢀRIIꢀWKHꢀSURMHFWRUꢀZKLOHꢀFRQQHFWHGꢀWRꢀDꢀGHYLFHꢀLQꢀ
operation, unless that is directed in the manual of the device.
‡ꢀ6RPHꢀLQSXWꢀSRUWVꢀDUHꢀVHOHFWDEOHꢀLQꢀWKHꢀXVHꢂꢀ)RUꢀGHWDLOVꢁꢀVHHꢀUser's Manual -
Operating Guide.
‡ꢀ%HꢀFDUHIXOꢀQRWꢀWRꢀPLVWDNHQO\ꢀFRQQHFWꢀDꢀFRQQHFWRUꢀWRꢀDꢀZURQJꢀSRUWꢂ
‡ꢀ,IꢀDQꢀRYHUVL]HGꢀ86%ꢀVWRUDJHꢀGHYLFHꢀEORFNVꢀWKHꢀLANꢀSRUWꢁꢀXVHꢀDꢀ86%ꢀH[WHQVLRQꢀ
FDEOHꢀWRꢀFRQQHFWꢀWKHꢀ86%ꢀVWRUDJHꢀGHYLFHꢂ
7
Fastening the adapter cover
1
:KHQꢀXVLQJꢀWKHꢀ86%ꢀZLUHOHVVꢀDGDSWHUꢁꢀEHꢀ
sure to connect the adapter to the further USB
TYPE A port from the LAN port and use the
supplied adapter cover
.
2
3
Tab
Loosen the screw (marked with triangle) on
1.
2.
3.
the bottom left of the USB TYPE A ports.
Insert the tab of the cover into the hole at the upper right of
the USB TYPE A ports in the direction of the arrow.
Align the screw holes on the projector and the cover. Then
insert the screw removed from the projector into the hole and
tighten the screw.
WARNING Ź.HHSꢀVPDOOꢀSDUWVꢀDZD\ꢀIURPꢀFKLOGUHQꢀDQGꢀ
pets. Take care not to put in the mouth.
Ź+HDWꢀPD\ꢀEXLOGꢀXSꢀLQꢀWKHꢀ86%ꢀZLUHOHVVꢀDGDSWHUꢁꢀWRꢀDYRLGꢀ
possible burns disconnect the projector power cord for 10
minutes before touching the adapter.
Connecting power supply
AC
Put the connector of the power cord into the AC (AC
Power
cord
1.
2.
inlet) of the projector.
)LUPO\ꢀSOXJꢀWKHꢀSRZHUꢀFRUG¶VꢀSOXJꢀLQWRꢀWKHꢀRXWOHWꢂꢀ,QꢀDꢀ
couple of seconds after the power supply connection,
the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON
function activated, the connection of the power supply
make the projector turn on.
WARNINGꢀꢀŹ'RꢀQRWꢀFRQQHFWꢀWKHꢀSURMHFWRUꢀWRꢀDꢀSRZHUꢀVXSSO\ꢀZKLOHꢀQRꢀOHQVꢀ
unit is attached to it.
ŹPlease use extra caution when connecting the power cord, as incorrect or
IDXOW\ꢀFRQQHFWLRQVꢀPD\ꢀUHVXOWꢀLQꢀ¿ꢀUHꢀDQGꢇRUꢀHOHFWULFDOꢀVKRFNꢂ
‡ꢀ'RꢀQRWꢀWRXFKꢀWKHꢀSRZHUꢀFRUGꢀZLWKꢀDꢀZHWꢀKDQGꢂ
‡ꢀOnly use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord.
‡ꢀOnly plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Remove the power cord for complete separation.
‡ꢀ'ꢀ RꢀQRWꢀGLVWULEXWHꢀWKHꢀSRZHUꢀVXSSO\ꢀWRꢀPXOWLSOHꢀGHYLFHVꢂꢀ'RLQJꢀVRꢀPD\ꢀRYHUORDGꢀ
WKHꢀRXWOHWꢀDQGꢀFRQQHFWRUVꢁꢀORRVHQꢀWKHꢀFRQQHFWLRQꢁꢀRUꢀUHVXOWꢀLQꢀ¿ꢀUHꢁꢀHOHFWULFꢀ
shock or other accidents.
‡ꢀ&ꢀ RQQHFWꢀWKHꢀJURXQGꢀWHUPLQDOꢀIRUꢀWKHꢀ$&ꢀLQOHWꢀRIꢀWKLVꢀXQLWꢀWRꢀWKHꢀJURXQGꢀWHUPLQDOꢀ
of the building using an appropriate power cord (bundled).
NOTICEꢀꢀŹ7KLVꢀSURGXFWꢀLVꢀDOVRꢀGHVLJQHGꢀIRUꢀ,7ꢀSRZHUꢀV\VWHPVꢀZLWKꢀDꢀSKDVHꢊ
to-phase voltage of 220 to 240 V.
8
Turning on the power
0DNHꢀVXUHꢀWKDWꢀWKHꢀSRZHUꢀFRUGꢀLVꢀ¿UPO\ꢀDQGꢀFRUUHFWO\ꢀFRQQHFWHGꢀWRꢀWKHꢀ
1.
2.
projector and the outlet.
Make sure that the POWER indicator is
POWER indicator
lighted in steady orange. Then remove the
lens cover.
ON button
Press the STANDBY/ON button on
the projector or the ON button on the
remote control.
3.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
STANDBY/ON button
WARNING Ź$ꢀVWURQJꢀOLJKWꢀLVꢀHPLWWHGꢀZKHQꢀWKHꢀSURMHFWRU¶VꢀSRZHUꢀLVꢀRQꢂꢀ'Rꢀ
not look into the lens of the projector or look inside of the projector through any
of the projector’s openings.
NOTEꢀꢀ‡ꢀ3OHDVHꢀSRZHUꢀRQꢀWKHꢀSURMHFWRUꢀSULRUꢀWRꢀWKHꢀFRQQHFWHGꢀGHYLFHVꢂ
‡ꢀ7KHꢀSURMHFWRUꢀKDVꢀWKHꢀ',5(&7ꢀ32:(5ꢀ21ꢀIXQFWLRQꢁꢀZKLFKꢀFDQꢀPDNHꢀWKHꢀ
SURMHFWRUꢀDXWRPDWLFDOO\ꢀWXUQꢀRQꢂꢀ)RUꢀPRUHꢀLQIRUPDWLRQꢁꢀSOHDVHꢀVHHꢀUser’s
Manual - Operating Guide.
9
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to
the left or right, use the elevator feet to place the projector
horizontally. Using the feet can also tilt the projector
in order to project at a suitable angle to the screen,
elevating the front side of the projector within 9 degrees.
This projector has 2 elevator feet and 2 elevator buttons.
An elevator foot is adjustable while pushing the elevator
button on the same side as it.
To loose an
Holding the projector, push the elevator buttons to
loose the elevator feet.
elevator foot,
push the elevator
button on the
same side as it.
1.
Position the front side of the projector to the desired
height.
2.
Release the elevator buttons in order to lock the
elevator feet.
3.
After making sure that the elevator feet are locked,
put the projector down gently.
4.
7Rꢀ¿ꢀQHO\ꢀ
adjust, twist
the foot.
If necessary, the elevator feet can be manually
twisted to make more precise adjustments. Hold the
projector when twisting the feet.
5.
CAUTION Ź'RꢀQRWꢀKDQGOHꢀWKHꢀHOHYDWRUꢀEXWWRQVꢀZLWKRXWꢀKROGLQJꢀWKHꢀ
projector, since the projector may drop down.
Ź'RꢀQRWꢀWLOWꢀWKHꢀSURMHFWRUꢀRWKHUꢀWKDQꢀHOHYDWLQJꢀLWVꢀIURQWꢀZLWKLQꢀꢋꢀGHJUHHVꢀXVLQJꢀ
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
,WꢀLVꢀSRVVLEOHꢀWRꢀLQVWDOOꢀWKHꢀSURMHFWRUꢀIRUꢀDQ\ꢀGLUHFWLRQꢀZLWKꢀVSHFL¿ꢀHGꢀPRXQWLQJꢀ
accessories. Consult with your dealer about such a special installation.
Adjusting the lens position
LENS SHIFT button
Shifting the lens position shifts the projection
position.
After pressing the LENS SHIFT button on the
control panel or the remote control, use the
cursor buttons to shift the lens position.
CAUTION Ź'RꢀQRWꢀSXWꢀ\RXUꢀ¿ꢀQJHUVꢀRUꢀDQ\ꢀRWKHUꢀ
things around the lens. The moving lens could catch
them in the space around the lens and result in an injury.
LENS SHIFT
button
NOTEꢀꢀ‡ꢀThe projector may ignore operation by buttons while moving the lens.
‡ꢀ*HQHUDOO\ꢁꢀEHWWHUꢀLPDJHꢀTXDOLW\ꢀFDQꢀEHꢀJRWꢀZKHQꢀWKHꢀOHQVꢀLVꢀVHWꢀWRꢀWKHꢀFHQWHUꢂ
10
Displaying the picture
Activate your signal source. Turn the signal
1.
source on, and make it send the signal to the
projector.
VOL + / -
buttons
Press the INPUT button on the projector.
2.
Each time you press the button, the projector
switches its input port in turn.
You can also use the remote control to select
an input signal. Press any of the buttons from
COMPUTER 1 / 2, LAN, USB TYPE A / B, HDMI
1 / 2, COMPONENT, S-VIDEO or VIDEO to
select the input signal from each port.
INPUT button
Use the VOL + / - buttons to adjust the volume.
3.
The projector is not equipped with an internal
speaker. The audio is output from the external
%XWWRQVꢀIRUꢀLQSXWꢀSRUWV
audio system connected to the AUDIO OUT port.
Press the ASPECT button on the remote control.
4.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
Use the ZOOM + / - buttons on the remote
5.
control or ZOOM EXWWRQꢀDQGꢀŻꢇŹꢀFXUVRUꢀEXWWRQVꢀ
on the projector to adjust the screen size.
ASPECT
button
Use the FOCUS + / - buttons on the projector or
the remote control to focus the picture.
6.
ZOOM button
ZOOM + / -
buttons
FOCUS + / -
buttons
FOCUS - / + buttons
CAUTIONꢀꢀŹ,Iꢀ\RXꢀZLVKꢀWRꢀKDYHꢀDꢀEODQNꢀVFUHHQꢀZKLOHꢀWKHꢀSURMHFWRUꢌVꢀODPSꢀLVꢀ
on, use the lens shade or AV MUTE function (see User’s Manual - Operating
Guide). Taking any other action may cause the damage on the projector.
NOTEꢀꢀ‡ꢀThe ASPECT button does not work when no proper signal is inputted.
‡ꢀ7KHUHꢀPD\ꢀEHꢀVRPHꢀQRLVHꢀDQGꢇRUꢀWKHꢀVFUHHQꢀPD\ꢀÀꢀLFNHUꢀIRUꢀDꢀPRPHQWꢀZKHQꢀDQꢀ
operation is made. This is not a malfunction.
‡ꢀ)RUꢀWKHꢀGHWDLOVꢀRIꢀKRZꢀWRꢀDGMXVWꢀWKHꢀSLFWXUHꢁꢀSOHDVHꢀVHHꢀUser’s Manual -
Operating Guide.
11
Turning off the power
POWER indicator
STANDBY
Press the STANDBY/ON button on the
1.
projector or the STANDBY button on
the remote control.
button
7KHꢀPHVVDJHꢀ³3RZHUꢀRII"´ꢀZLOOꢀDSSHDUꢀ
on the screen for about 5 seconds.
Press the STANDBY/ON or STANDBY
button again while the message
appears.
2.
The projector lamp will go off, and the
POWER indicator will begin blinking in
orange. Then the POWER indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
STANDBY/ON button
3. Attach the lens cover, after the POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the
lamp.
WARNING Ź'RꢀQRWꢀWRXFKꢀDURXQGꢀWKHꢀODPSꢀFRYHUꢀDQGꢀWKHꢀH[KDXVWꢀYHQWVꢀ
during use or just after use, since it is too hot.
Ź5HPRYHꢀWKHꢀSRZHUꢀFRUGꢀIRUꢀFRPSOHWHꢀVHSDUDWLRQꢂꢀ7KHꢀSRZHUꢀRXWOHWꢀVKRXOGꢀ
be close to the projector and easily accessible.
NOTEꢀꢀ‡ꢀ3OHDVHꢀSRZHUꢀRIIꢀWKHꢀSURMHFWRUꢀDIWHUꢀDQ\ꢀFRQQHFWHGꢀGHYLFHVꢀDUHꢀ
powered off.
‡ꢀ7KLVꢀSURMHFWRUꢀKDVꢀWKHꢀ$872ꢀ32:(5ꢀ2))ꢀIXQFWLRQꢀWKDWꢀFDQꢀPDNHꢀWKHꢀ
SURMHFWRUꢀWXUQꢀRIIꢀDXWRPDWLFDOO\ꢂꢀ)RUꢀPRUHꢀLQIRUPDWLRQꢁꢀSOHDVHꢀVHHꢀUser’s
Manual - Operating Guide.
12
Replacing the lamp
$ꢀODPSꢀKDVꢀ¿QLWHꢀSURGXFWꢀOLIHꢂꢀ8VLQJꢀWKHꢀODPSꢀIRUꢀORQJꢀSHULRGVꢀRIꢀWLPHꢀFRXOGꢀFDXVHꢀ
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, make contact with your dealer and tell the lamp type number.
Type number : DT01471
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
1.
3
Prepare a new lamp. If the projector is mounted
ZLWKꢀVSHFL¿HGꢀPRXQWLQJꢀDFFHVVRULHVꢁꢀRUꢀLIꢀWKHꢀODPSꢀ
has broken, also ask the dealer to replace the lamp.
2.
In case of replacement by yourself, follow the following
procedure.
Lamp cover
Loosen the screw (marked by arrow) of the lamp cover
and then slide down and lift the lamp cover to remove it.
3.
4.
Loosen the 3 screws (marked by arrow) of the
lamp, and slowly pull the lamp out by the handles.
Never loosen any other screws.
,QVHUWꢀWKHꢀQHZꢀODPSꢁꢀDQGꢀUHWLJKWHQꢀ¿UPO\ꢀWKHꢀ
3 screws of the lamp that are loosened in
the previous process to lock it in place.
5.
6.
Handles
4, 5
While putting the interlocking parts of the lamp
cover and the projector together, slide the lamp
FRYHUꢀEDFNꢀLQꢀSODFHꢂꢀ7KHQꢀ¿UPO\ꢀIDVWHQꢀWKHꢀVFUHZꢀ
of the lamp cover.
Turn the projector on and reset the lamp time
using the LAMP TIME item in the OPTION menu.
7.
6
(1) Press the MENU button to display a menu.
ꢅꢍꢆꢀ3RLQWꢀDWꢀWKHꢀ$'9$1&('ꢀ0(18ꢀLQꢀWKHꢀPHQXꢀXVLQJꢀWKHꢀźꢇŸꢀ
EXWWRQꢁꢀWKHQꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢂ
(3) Point at the OPTION in the left column of the menu using
WKHꢀźꢇŸEXWWRQꢁꢀWKHQꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢂ
ꢅꢎꢆꢀ3RLQWꢀDWꢀWKHꢀ/$03ꢀ7,0(ꢀXVLQJꢀWKHꢀźꢇŸꢀEXWWRQꢁꢀWKHQꢀSUHVVꢀ
WKHꢀŹꢀEXWWRQꢂꢀ$ꢀGLDORJꢀZLOOꢀDSSHDUꢂ
Ź
(5) Press the button to select ³2.” on the dialog. It performs resetting the lamp time.
CAUTION Ź'RꢀQRWꢀWRXFKꢀWKHꢀLQWHULRUꢀRIꢀWKHꢀSURMHFWRUꢁꢀZKLOHꢀWKHꢀODPSꢀLVꢀ
taken out.
NOTEꢀꢀ‡ꢀ3OHDVHꢀUHVHWꢀWKHꢀODPSꢀWLPHꢀRQO\ꢀZKHQꢀ\RXꢀKDYHꢀUHSODFHGꢀWKHꢀODPSꢁꢀ
for a suitable indication about the lamp.
13
Replacing the lamp (continued)
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
WARNING ŹThe projector uses a high-pressure mercury glass lamp. The
lamp can break with a loud bang, or burn out, if jolted or scratched, handled
while hot, or worn over time. Note that each lamp has a different lifetime, and
some may burst or burn out soon after you start using them. In addition, if the
EXOEꢀEXUVWVꢁꢀLWꢀLVꢀSRVVLEOHꢀIRUꢀVKDUGVꢀRIꢀJODVVꢀWRꢀÀ\ꢀLQWRꢀWKHꢀODPSꢀKRXVLQJꢁꢀDQGꢀ
IRUꢀJDVꢀFRQWDLQLQJꢀPHUFXU\ꢀDQGꢀGXVWꢀFRQWDLQLQJꢀ¿QHꢀSDUWLFOHVꢀRIꢀJODVVꢀWRꢀHVFDSHꢀ
from the projector’s vent holes.
ŹAbout disposal of a lamp: This product contains a mercury lamp; do not put
it in a trash. Dispose of it in accordance with environmental laws.
‡ꢀ)ꢀ RUꢀSURGXFWꢀGLVSRVDOꢁꢀFRQVXOWꢀ\RXUꢀORFDOꢀJRYHUQPHQWꢀDJHQF\ꢀ
)RUꢀPRUHꢀLQIRUPDWLRQꢁꢀDVNꢀ\RXUꢀGHDOHUꢂ
‡ꢀ,IꢀWKHꢀODPSꢀVKRXOGꢀEUHDNꢀꢅLWꢀZLOOꢀPDNHꢀDꢀORXGꢀEDQJꢀZKHQꢀLWꢀGRHVꢆꢁꢀ
unplug the power cord from the outlet, and make sure to request a
replacement lamp from your local dealer. Note that shards of glass
could damage the projector’s internals, or cause injury during handling,
so please do not try to clean the projector or replace the lamp yourself.
‡ꢀ,IꢀWKHꢀODPSꢀVKRXOGꢀEUHDNꢀꢅLWꢀZLOOꢀPDNHꢀDꢀORXGꢀEDQJꢀZKHQꢀLWꢀGRHVꢆꢁꢀ
ventilate the room well, and make sure not to inhale the gas or fine
particles that come out from the projector's vent holes, and not to get
them into your eyes or mouth.
‡ꢀ%HIRUHꢀUHSODFLQJꢀWKHꢀODPSꢁꢀWXUQꢀWKHꢀSURMHFWRUꢀRIIꢀDQGꢀXQSOXJꢀWKHꢀSRZHUꢀ
cord, then wait at least 45 minutes for the lamp to cool sufficiently.
Handling the lamp while hot can cause burns, as well as damaging the lamp.
Disconnect
the plug
from the
power
outlet
‡ꢀ1HYHUꢀXQVFUHZꢀH[FHSWꢀWKHꢀDSSRLQWHGꢀꢅPDUNHGꢀE\ꢀDQꢀDUURZꢆꢀVFUHZVꢂ
‡ꢀ'RꢀQRWꢀRSHQꢀWKHꢀODPSꢀFRYHUꢀZKLOHꢀWKHꢀSURMHFWRUꢀLVꢀVXVSHQGHGꢀIURPꢀ
a ceiling. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in
high places is dangerous, so ask your local dealer to have the lamp
replaced even if the bulb is not broken.
‡ꢀ'RꢀQRWꢀXVHꢀWKHꢀSURMHFWRUꢀZLWKꢀWKHꢀODPSꢀFRYHUꢀUHPRYHGꢂꢀ$WꢀWKHꢀODPSꢀ
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
‡ꢀUse only the lamp of the specified type. Use of a lamp that does not
PHHWꢀWKHꢀODPSꢀVSHFL¿FDWLRQVꢀIRUꢀWKLVꢀPRGHOꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢁꢀGDPDJHꢀRUꢀ
shorten the life of this product.
‡ꢀ,IꢀWKHꢀODPSꢀEUHDNVꢀVRRQꢀDIWHUꢀWKHꢀILUVWꢀWLPHꢀLWꢀLVꢀXVHGꢁꢀLWꢀLVꢀSRVVLEOHꢀ
that there are electrical problems elsewhere besides the lamp. If this
happens, consult your local dealer or a service representative.
‡ꢀHandle with care: jolting or scratching could cause the lamp bulb to burst during use.
‡ꢀ8VLQJꢀWKHꢀODPSꢀIRUꢀORQJꢀSHULRGVꢀRIꢀWLPHꢁꢀFRXOGꢀFDXVHꢀLWꢀGDUNꢁꢀQRWꢀWRꢀOLJKWꢀ
up or to burst. When the pictures appear dark, or when the color tone
is poor, please replace the lamp as soon as possible. Do not use old
(used) lamps; this is a cause of breakage.
14
&OHDQLQJꢀDQGꢀUHSODFLQJꢀWKHꢀDLUꢀÀOWHU
Please check and cleDQꢀWKHꢀDLUꢀ¿OWHUꢀSHULRGLFDOO\ꢂꢀ:KHQꢀWKHꢀLQGLFDWRUVꢀRUꢀDꢀ
PHVVDJHꢀSURPSWVꢀ\RXꢀWRꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢁꢀFRPSO\ꢀZLWKꢀLWꢀDVꢀVRRQꢀDVꢀSRVVLEOHꢂ
7KHꢀ¿OWHUꢀXQLWꢀZLWKꢀꢍꢀVKHHWVꢀRIꢀ¿OWHUVꢀLVꢀLQVLGHꢀRIꢀWKHꢀ¿OWHUꢀFRYHUꢂꢀ,QꢀDGGLWLRQꢁꢀWKHꢀH[WUDꢀ
DLUꢀ¿OWHUꢀLVꢀDWWDFKHGꢀWRꢀLQQHUꢀVLGHꢀRIꢀWKHꢀ¿OWHUꢀFRYHUꢂꢀ,IꢀRQHꢀRIꢀWKHꢀ¿OWHUVꢀLVꢀGDPDJHGꢀ
RUꢀKHDYLO\ꢀVRLOHGꢁꢀUHSODFHꢀZKROHꢀ¿OWHUꢀVHWꢀZLWKꢀDꢀQHZꢀRQHꢂ
5HTXHVWꢀIRUꢀDꢀ¿OWHUꢀVHWꢀZLWKꢀWKHꢀIROORZLQJꢀW\SHꢀQXPEHUꢀIURPꢀ\RXUꢀGHDOHUꢀZKHQꢀ
purchasing a new one.
Type number : UX38242
2
Turn the projector off, and unplug the power
FRUGꢂꢀ$OORZꢀWKHꢀSURMHFWRUꢀWRꢀVXI¿FLHQWO\ꢀFRROꢀ
down.
1.
Use a vacuum cleaner on and around the
¿OWHUꢀFRYHUꢂ
2.
3.
4.
3LFNꢀDQGꢀSXOOꢀXSꢀWKHꢀ¿OWHUꢀFRYHUꢀNQREVꢀWRꢀ
take it off.
)LOWHUꢀFRYHU
3
Press up slightly the bottom side knobs
WRꢀXQORFNꢀWKHꢀERWWRPꢀVLGHꢀRIꢀWKHꢀ¿OWHUꢀXQLWꢂꢀ
3XOOꢀWKHꢀFHQWHUꢀNQREꢀWRꢀWDNHꢀWKHꢀ¿OWHUꢀXQLWꢀ
off.
)LOWHUꢀFRYHUꢀ
knobs
Extra
DLUꢀ¿OWHU
8VHꢀDꢀYDFXXPꢀFOHDQHUꢀIRUꢀWKHꢀ¿OWHUꢀYHQWꢀ
of the projector and the outer side of the
¿OWHUꢀXQLWꢂ
5.
6.
7.
7KHꢀ¿OWHUꢀXQLWꢀFRQVLVWVꢀRIꢀWZRꢀSDUWVꢂꢀ3UHVVꢀ
down around the interlocking parts to
unlock, then separate the two parts.
4, 5
)LOWHUꢀXQLW
Use a vacuum cleaner for the inner side
RIꢀHDFKꢀSDUWꢀRIꢀWKHꢀ¿OWHUꢀXQLWꢀWRꢀFOHDQꢀWKHPꢀ
XSꢂꢀ,IꢀWKHꢀ¿OWHUVꢀDUHꢀGDPDJHGꢀRUꢀKHDYLO\ꢀ
soiled, replace them with the new ones.
)LOWHUꢀXQLWꢀ
knobs
6
Combine the two parts to reassemble the
¿OWHUꢀXQLWꢂ
8.
9.
Interlocking
parts
3XWꢀWKHꢀ¿OWHUꢀXQLWꢀEDFNꢀLQWRꢀWKHꢀSURMHFWRUꢂ
7
(continued on next page)
15
&OHDQLQJꢀDQGꢀUHSODFLQJꢀWKHꢀDLUꢀ¿OWHUꢀꢀꢁFRQWLQXHGꢂ
3XWꢀWKHꢀ¿OWHUꢀFRYHUꢀEDFNꢀLQWRꢀWKHꢀSODFHꢂ
10.
7XUQꢀWKHꢀSURMHFWRUꢀRQꢀDQGꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢀXVLQJꢀWKHꢀ),/7(5ꢀ7,0(ꢀLWHPꢀ
in the EASY MENU.
(1) Press the MENU button to display a menu.
11.
ꢅꢍꢆꢀꢀ3RLQWꢀDWꢀWKHꢀ),/7(5ꢀ7,0(ꢀXVLQJꢀWKHꢀŸ/ź cursor buttons, then press the
Ź cursor (or the ENTER / the RESET) button. A dialog will appear.
ꢅꢈꢆꢀꢀ3UHVVꢀWKHꢀŹꢀFXUVRUꢀEXWWRQꢀWRꢀVHOHFWꢀWKHꢀ³2.´ꢀRQꢀWKHꢀGLDORJꢂꢀ,WꢀSHUIRUPVꢀ
UHVHWWLQJꢀWKHꢀ¿OWHUꢀWLPHꢂ
WARNINGꢀꢀꢀŹꢀ%HIRUHꢀWDNLQJꢀFDUHꢀRIꢀWKHꢀDLUꢀ¿OWHUꢁꢀPDNHꢀVXUHꢀWKHꢀSRZHUꢀ
FDEOHꢀLVꢀQRWꢀSOXJJHGꢀLQꢁꢀWKHQꢀDOORZꢀWKHꢀSURMHFWRUꢀWRꢀFRROꢀVXI¿FLHQWO\ꢂ
Ź8VHꢀRQO\ꢀWKHꢀDLUꢀ¿OWHUꢀRIꢀWKHꢀVSHFL¿HGꢀW\SHꢂꢀ'RꢀQRWꢀXVHꢀWKHꢀSURMHFWRUꢀZLWKRXWꢀ
WKHꢀDLUꢀ¿OWHUꢀRUꢀWKHꢀ¿OWHUꢀFRYHUꢂꢀ,WꢀFRXOGꢀUHVXOWꢀLQꢀDꢀ¿UHꢀRUꢀPDOIXQFWLRQꢀWRꢀWKHꢀ
projector.
Ź&OHDQꢀWKHꢀDLUꢀ¿OWHUꢀSHULRGLFDOO\ꢂꢀ,IꢀWKHꢀDLUꢀ¿OWHUꢀEHFRPHVꢀFORJJHGꢀE\ꢀGXVWꢀRUꢀWKHꢀ
OLNHꢁꢀLQWHUQDOꢀWHPSHUDWXUHVꢀULVHꢀDQGꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢁꢀDꢀEXUQꢀRUꢀPDOIXQFWLRQꢀWRꢀ
the projector.
NOTE ‡ꢀ3OHDVHꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢀRQO\ꢀZKHQꢀ\RXꢀKDYHꢀFOHDQHGꢀRUꢀUHSODFHGꢀ
WKHꢀDLUꢀ¿OWHUꢁꢀIRUꢀDꢀVXLWDEOHꢀLQGLFDWLRQꢀDERXWꢀWKHꢀDLUꢀ¿OWHUꢂ
‡ꢀ7KHꢀSURMHFWRUꢀPD\ꢀGLVSOD\ꢀWKHꢀPHVVDJHꢀVXFKꢀDVꢀWKHꢀ³&+(&.ꢀ7+(ꢀ$,5ꢀ
)/2:´ꢀRUꢀWXUQꢀRIIꢀWKHꢀSURMHFWRUꢁꢀWRꢀSUHYHQWꢀWKHꢀLQWHUQDOꢀKHDWꢀOHYHOꢀULVLQJꢂ
16
Using the CD manual
The other manuals for this product are written into the included CD-ROM titled
³8VHU¶Vꢀ0DQXDOꢀꢅGHWDLOHGꢆ´ꢂꢀ%HIRUHꢀXVLQJꢀWKHꢀ&'ꢊ520ꢁꢀSOHDVHꢀUHDGꢀWKHꢀIROORZLQJꢀ
to ensure the proper use.
System requirements
The system for using the CD-ROM requires the following.
Windows®:
OS:Windows® XP, Windows Vista®, Windows® 7 or later
Macintosh®:
OS:Mac OS® 10.2 or later
CD-ROM/DVD-ROM drive
Applications:
Microsoft® Internet Explorer®6.0 and
Adobe® Acrobat® Reader® 8.0 or later
How to use the CD
1. Insert CD into computer’s CD-ROM drive.
Windows®:
In a while, Web browser automatically starts. Start up
window comes up.
ꢅꢃꢆꢀ'RXEOHꢊFOLFNꢀRQꢀWKHꢀ³352-(&7256´ꢀLFRQꢀDSSHDUHGꢀRQꢀ
the desktop screen.
Macintosh®:
ꢅꢍꢆꢀ:KHQꢀ³PDLQꢂKWPO´ꢀILOHꢀLVꢀFOLFNHGꢁꢀ:HEꢀEURZVHUꢀZLOOꢀVWDUWꢀ
and Initial window will appear.
2. Click the model name of your projector first, and then click language you want
from the displayed list. The User’s manual (detailed) will open.
CAUTION Ź2QO\ꢀXVHꢀWKHꢀ&'ꢊ520ꢀLQꢀDꢀFRPSXWHUꢀ&'ꢇ'9'ꢀGULYHꢂꢀ7KHꢀ
CD-ROM is designed for computer use only. NEVER INSERT THE CD-ROM
INTO A NON-COMPUTER CD/DVD PLAYER! Inserting the CD-ROM into an
incompatible CD/DVD drive may produce a loud noise, which in turn MAY
5(68/7ꢀ,1ꢀ($5ꢀ$1'ꢀ63($.(5ꢀ'$0$*(ꢏꢀ
‡ꢀAfter using CD-ROM, please put it into CD case and keep it. Please keep
the CD neither in direct sunlight nor in a high temperature and high humidity
environment.
NOTEꢀꢀ‡ꢀ7KHꢀLQIRUPDWLRQꢀLQꢀWKHꢀ&'ꢊ520ꢀLVꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀQRWLFHꢂ
3OHDVHꢀFKHFNꢀRXUꢀZHEVLWHꢀZKHUHꢀ\RXꢀPD\ꢀ¿QGꢀWKHꢀODWHVWꢀLQIRUPDWLRQꢀIRUꢀWKLVꢀ
projector. ( 20)
‡ꢀ1RꢀUHVSRQVLELOLW\ꢀLVꢀWDNHQꢀIRUꢀDQ\ꢀREVWDFOHꢀDQGꢀGHIHFWꢀWRꢀKDUGZDUHꢀDQGꢀ
software of your computer as a result of the use of the CD-ROM.
‡ꢀ$OOꢀRUꢀ$Q\ꢀSDUWꢀRIꢀWKHꢀLQIRUPDWLRQꢀLQꢀWKHꢀ&'ꢊ520ꢀPXVWꢀQRWꢀEHꢀFRSLHGꢁꢀ
reproduced or republished without notice to our company.
17
6SHFLÀFDWLRQV
Item
6SHFL¿FDWLRQ
Product name
Liquid crystal projector
CP-X8170:
786,432 pixels (1024 horizontal x 768 vertical)
CP-WX8265:
1,024,000 pixels (1280 horizontal x 800 vertical)
CP-WU8460:
Liquid Crystal
Panel
2,304,000 pixels (1920 horizontal x 1200 vertical)
Lamp
365W UHP
Power supply,
Rated current
AC100-120 V: 5.1 A, AC220-240 V: 2.5 A
Power
consumption
AC100-120 V: 500 W, AC220-240 V: 480 W
0 ~ 45 °C (Operating)
* When the projector is used at high altitudes, the service
life of the optical components may be reduced by peripheral
temperatures of over about 40°C. It is recommended to
reduce the temperature as far as possible.
Temperature
range
498 (W) x 135 (H) x 396 (D) mm
Size
ꢐꢀ1RWꢀLQFOXGLQJꢀSURWUXGLQJꢀSDUWVꢂꢀ5HIHUꢀWRꢀ¿JXUHꢀF-5 at the back
of this manual.
Weight (mass) approx. 8.6 kg
(continued on next page)
18
6SHFL¿FDWLRQVꢀꢁFRQWLQXHGꢂ
6SHFL¿FDWLRQ
Item
COMPUTER IN1 .......................... D-sub 15 pin mini jack x1
COMPUTER IN2ꢀꢅ+ꢁꢀ9ꢁꢀ*ꢇ<ꢁꢀ%ꢇ&Eꢇ3Eꢁꢀ5ꢇ&Uꢇ3Uꢆꢀ ... ꢀ%1&ꢀMDFNꢀ[ꢄ
HDMI 1 ................................................... HDMI connector x1
HDMI 2 ................................................... HDMI connector x1
MONITOR OUT ............................. D-sub 15 pin mini jack x1
COMPONENT (Y, Cb/Pb, Cr/Pr) ....................... RCA jack x3
S-VIDEO ............................................. Mini DIN 4 pin jack x1
VIDEO ............................................................... RCA jack x1
AUDIO IN1 ............................... 3.5 mm (stereo) mini jack x1
AUDIO IN2 ............................... 3.5 mm (stereo) mini jack x1
AUDIO IN3 (L, R) .............................................. RCA jack x2
AUDIO OUT (L, R) ............................................ RCA jack x2
USB TYPE A .................................ꢀ86%ꢀW\SHꢀ$ꢀFRQQHFWRUꢀ[ꢍ
USB TYPE B .................................ꢀ86%ꢀW\SHꢀ%ꢀFRQQHFWRUꢀ[ꢃ
CONTROL .............................................. D-sub 9 pin plug x1
LAN .................................................................. ꢀ5-ꢎꢄꢀMDFNꢀ[ꢃ
REMOTE CONTROL IN ........... 3.5 mm (stereo) mini jack x1
REMOTE CONTROL OUT ....... 3.5 mm (stereo) mini jack x1
Ports
Lamp: DT01471
Filter set: UX38242
Lens unit: )/ꢊꢑꢉꢃꢀꢅ)L[HGꢀVKRUWꢀWKURZꢀOHQVꢆ
SL-702 (Short throw lens)
ML-703 (Middle throw lens)
LL-704 (Long throw lens)
UL-705 (Ultra long throw lens)
Optional parts
Mounting accessory:
+$6ꢊꢒꢃꢄꢉꢀꢅ%UDFNHWꢀIRUꢀ¿[LQJꢀPRXQWꢆ
+$6ꢊꢍꢉꢎ/ꢀꢅ6WDQGDUGꢀDGDSWRUꢀIRUꢀ¿[LQJꢀPRXQWꢆ
+$6ꢊꢈꢉꢎ+ꢀꢅ/RQJꢀDGDSWRUꢀIRUꢀ¿[LQJꢀPRXQWꢆ
USB wireless adapter:ꢀ86%ꢊ:/ꢊꢃꢃ1
ꢐꢀ)RUꢀPRUHꢀLQIRUPDWLRQꢁꢀSOHDVHꢀFRQVXOWꢀ\RXUꢀGHDOHUꢂ
19
Troubleshooting - Warranty and after-service
If an abnormal operation (such as smoke, strange odor or excessive sound)
should occur, stop using the projector immediately.
2WKHUZLVHꢀLIꢀDꢀSUREOHPꢀRFFXUVꢀZLWKꢀWKHꢀSURMHFWRUꢁꢀ¿UVWꢀUHIHUꢀWRꢀ³7URXEOHVKRRWLQJ´ꢀRIꢀ
User’s Manual - Operating Guide, Instant Stack Guide and Network Guide,
and run through the suggested checks.
If this does not resolve the problem, please consult your dealer or service
company. They will tell you what warranty condition is applied.
3OHDVHꢀFKHFNꢀWKHꢀIROORZLQJꢀZHEꢀDGGUHVVꢀZKHUHꢀ\RXꢀPD\ꢀ¿QGꢀWKHꢀODWHVWꢀLQIRUPDWLRQꢀ
for this projector.
Product
information and
Manuals :
Production
information :
userguides.htm
Direct link to
manual download :
NOTE ‡ꢀ7KHꢀLQIRUPDWLRQꢀLQꢀWKLVꢀPDQXDOꢀLVꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀQRWLFHꢂ
‡ꢀ7KHꢀLOOXVWUDWLRQVꢀVKRZQꢀLQꢀWKLVꢀPDQXDOꢀDUHꢀRQHꢀH[DPSOHꢀIRUꢀH[SODQDWLRQꢂꢀ2Qꢀ
your projector, there may be some differences from the illustrations.
‡ꢀ7KHꢀPDQXIDFWXUHUꢀDVVXPHVꢀQRꢀUHVSRQVLELOLW\ꢀIRUꢀDQ\ꢀHUURUVꢀWKDWꢀPD\ꢀDSSHDUꢀLQꢀ
this manual.
‡ꢀ7KHꢀUHSURGXFWLRQꢁꢀWUDQVIHUꢀRUꢀFRS\ꢀRIꢀDOOꢀRUꢀDQ\ꢀSDUWꢀRIꢀWKLVꢀGRFXPHQWꢀLVꢀQRWꢀ
permitted without express written consent.
Trademark acknowledgment
‡ꢀ0ꢀ DF®, Macintosh® and Mac OS® are registered trademarks of Apple Inc.
‡ꢀ3ꢀ HQWLXP® is a registered trademark of Intel Corp.
‡ꢀAꢀ
dobe® and Acrobat®, Reader® are registered trademarks of Adobe Systems Incorporated.
‡ꢀ0ꢀ LFURVRIW®, Internet Explorer®, Windows®, Windows NT® and Windows Vista® are
registered trademarks of Microsoft Corporation in the U.S. and/or other countries.
‡ꢀHDMITMꢁꢀWKHꢀ+'0,ꢀORJRꢀDQGꢀ+LJKꢊ'H¿QLWLRQꢀ0XOWLPHGLDꢀ,QWHUIDFHꢀDUHꢀWUDGHPDUNVꢀRUꢀ
registered trademarks of HDMI Licensing LLC in the United States and other countries.
‡ꢀ%ꢀ OXꢊUD\ꢀ'LVFTMꢀDQGꢀ%OXꢊUD\TMꢀDUHꢀWUDGHPDUNVꢀRIꢀ%OXꢊUD\ꢀ'LVFꢀ$VVRFLDWLRQꢂ
All other trademarks are the properties of their respective owners.
End User License Agreement for the Projector Software
‡ꢀ6RIWZDUHꢀLQꢀWKHꢀSURMHFWRUꢀFRQVLVWVꢀRIꢀWKHꢀSOXUDOꢀQXPEHUꢀRIꢀLQGHSHQGHQWꢀ
software modules and there exist our copyright or/and third party copyrights for
each of such software modules.
‡ꢀ%HꢀVXUHꢀWRꢀUHDGꢀ³(QGꢀ8VHUꢀ/LFHQVHꢀ$JUHHPHQWꢀIRUꢀWKHꢀ3URMHFWRUꢀ6RIWZDUH´ꢀ
which is separated document. (in the CD)
20
|