nüvifone™ M10
owner’s manual
Introduction
Update the Software
download the latest software update.
Introduction
The nüvifone™ M10 is a multi-
media mobile phone with integrated
navigation and services.
before updating the nüvifone software.
Get Support
in-country and regional support
information.
nüMaps Guarantee™
To receive one free map update (if
available), register your nüvifone at
www.garminasus.com within 60 days
of acquiring satellites while driving
with your nüvifone. You are not
eligible for the free map update if you
register by phone or wait longer than
60 days after the first time you acquire
satellites while driving with your
nüvifone.
Register Your Product
Register your product at
www.garminasus.com to help us better
support you. Keep the original sales
receipt, or a photocopy, in a safe place.
Note: If you have registered for
Additional Maps
You can purchase additional maps for
your nüvifone. To see a list of maps
that are compatible with your nüvifone,
0700
nüvifone M10 Owner’s Manual
i
Table of Contents
Table of Contents
ii
nüvifone M10 Owner’s Manual
Table of Contents
nüvifone M10 Owner’s Manual
iii
Table of Contents
iv
nüvifone M10 Owner’s Manual
Table of Contents
nüvifone M10 Owner’s Manual
v
Table of Contents
vi
nüvifone M10 Owner’s Manual
Get Started
Get Started
WARNING
product warnings and other important information.
nüvifone Device Features
Power key
Headphone
connector
Volume
keys
Micro-USB
connector
for power
and
computer
connection
Camera lens
(on back)
Power
connector
for
Send
key
End key
navigation
cradle
Start
menu
key
Stylus
7
nüvifone M10 Owner’s Manual
Get Started
Battery cover
Setting Up the Device
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to extreme
heat, remove the device from the
vehicle when exiting or store it out of
direct sunlight.
Install the SIM Card
1. Slide the SIM card holder toward
the outside edge of the device and
lift up, as directed on the holder.
2. Place the SIM card in the device
with the gold contacts facing down
and the notched corner near the
center of the device.
1. Remove the battery cover.
2. Install the SIM card.
3. Install the microSD card (optional).
Reset button
SIM card holder
5. Replace the battery cover. See
Remove the Battery Cover
Slide the battery cover off the back of
the nüvifone.
microSD card holder
8
nüvifone M10 Owner’s Manual
Get Started
3. Close the card holder.
Install the Battery
1. Locate the battery that came in the
product box.
4. Slide the card holder toward the
center of the device to lock it.
2. Locate the metal contacts on the
end of the battery and in the battery
compartment.
Install the microSD Card
You can use an optional microSD card
to hold more data.
3. Insert the battery with the large
Garmin-Asus logo facing down and
the metal contacts on the battery
aligned with the contacts in the
battery compartment.
1. Slide the microSD card holder
toward the top edge of the device
and lift up.
2. Place the microSD card in the
device with the gold contacts facing
down.
Battery
3. Close the card holder.
4. Slide the card holder toward the
center of the device to lock it.
Note: For more battery information,
nüvifone M10 Owner’s Manual
9
Get Started
4. Plug the AC adapter into a power
outlet.
Replace the Battery Cover
Slide the battery cover onto the back of
the device until it clicks.
If you completely discharge the battery,
recharge it for at least 20 minutes
before turning on your nüvifone.
Charge the Battery
Notice
Alternate Charging Methods
Your nüvifone will not charge if it
has exceeded the maximum charging
temperature of 122°F (50°C). If the
nüvifone is mounted in the windshield,
remove it from the mount and place it
somewhere out of direct sunlight.
•
(Preferred and fastest method)
Insert your nüvifone into the cradle,
and connect the vehicle power
cable to the cradle.
•
•
Connect the vehicle power cable to
your nüvifone.
Charge the battery for at least four
hours before using the nüvifone for the
first time.
Connect your nüvifone to a
computer using the USB cable
included in the box.
1. Insert the plug into the AC power
adapter, if necessary.
•
Insert the battery into the battery
charger (accessory). For more
information about accessories, go to
2. Plug the USB cable into the AC
adapter.
3. Connect the micro-USB end of the
USB cable to the connector on the
side of the device.
10
nüvifone M10 Owner’s Manual
Get Started
Cradle
Suction
cup mount
Turn On Your nüvifone
Press and hold the Power key to turn
on the nüvifone.
Mount the nüvifone in
Your Vehicle
The vehicle mount and power cable are
available in some nüvifone packages.
To purchase accessories, go to
Vehicle power
cable
5. Flip the lever back, toward the
windshield.
6. Snap the cradle onto the suction
cup arm.
1. Plug the vehicle power cable into
the power connector on the side of
the cradle.
7. Fit the gold contacts on the left side
of your nüvifone into the cradle.
8. Tilt the nüvifone back until it snaps
into the cradle.
2. Remove the clear plastic from the
suction cup.
9. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
3. Clean and dry your windshield and
the suction cup with a lint-free cloth.
4. Place the suction cup on the
windshield.
tIP: When you take your nüvifone out
of the mounting cradle, your current
location is saved, making it easy to find
your parking spot.
nüvifone M10 Owner’s Manual
11
Get to Know Your nüvifone
Get to Know Your
nüvifone
➋
➌
Current date and time, based
on the network. Tap to view the
alarms and global clocks.
Use the Home Screen
Application shortcut icons. Tap an
icon to open the application. Drag
your finger horizontally across the
Home screen icons to view more
icons. Touch and hold an icon to
edit the applications on the Home
screen.
➊
➋
➌
➍
➎
➏
Tap to place a phone call and
access contacts.
➍ ➎
➏
Tap to find and navigate to a
location.
Tap to view the map.
➊
Status bar. Tap to view the device
status and notifications, and to
search for locations.
12
nüvifone M10 Owner’s Manual
Get to Know Your nüvifone
Use the Keys
Scroll the Screen
•
Touch and drag your finger to
slowly scroll the screen.
Key
Use
Press to open the phone.
Press to send a call.
•
Touch, drag, and quickly remove
your finger to continue scrolling
after removing your finger.
Press to open the Start
menu.
•
Tap the screen to stop scrolling.
Press and hold to close or
switch applications.
You can scroll the screen both
vertically and horizontally.
Press to end a phone call.
When not on a phone call,
press to open the Home
screen.
Use the On-Screen
Buttons
Volume Press to increase or
up and decrease the audio level.
down
•
•
•
Tap
to access the menu for a
particular page.
Tap
page.
to return to the previous
Tap
to minimize the application.
nüvifone M10 Owner’s Manual
13
Get to Know Your nüvifone
Use the On-screen
Keyboard
Rotate the nüvifone
Rotate your nüvifone to the left or the
right to view in horizontal (landscape)
mode.
1. When available, tap
keyboard.
to open the
2. Tap the keys to enter data.
From horizontal mode, rotate your
nüvifone to the left or the right to view
in vertical (portrait) mode.
3. Tap
to close the keyboard.
Use the Stylus
The stylus is a pen-like device. To
remove the stylus, pull it out of the
lower-right corner of your nüvifone.
Some applications are only viewed
in one orientation. For example, the
camera is only available in landscape
mode.
•
•
•
•
Use the stylus to write, draw, select,
or drag an item on the screen.
Learn More
1. Press the
key.
Single-tap an item to select it or
open it.
2. Tap Getting Started >
Garmin-Asus.
Touch and drag an item to see the
menu.
3. Tap a topic.
Use the stylus to press the reset
button under the battery cover.
14
nüvifone M10 Owner’s Manual
Get to Know Your nüvifone
View the Status
1. Tap the status bar along the top of
the screen.
Lock Your nüvifone
Lock the touchscreen on your nüvifone
to prevent accidental taps.
1. Press the
2. Tap
key.
.
2. From the slider menu at the top of
the screen, select Status, Search,
or Notification.
Unlock Your nüvifone
1. Quickly press the Power key, if
necessary.
3. Tap an item to update it or view
more information about it.
2. Slide
. If there are multiple
unlock icons, tap and slide the icon
for the item you want to open.
Adjust the Volume
1. Press the volume key up or down.
2. Adjust the volume:
•
•
•
Move the slider up and down to
adjust the volume.
Tap
vibrate mode.
Tap to mute the device.
to place the device in
Note: To customize your system
nüvifone M10 Owner’s Manual
15
Get to Know Your nüvifone
Acquire GPS Satellite
Signals
Your nüvifone must acquire GPS
(Global Positioning System) satellite
signals to navigate. The nüvifone
automatically attempts to acquire
satellite signals.
Close Applications
1. Press and hold the
key.
2. Tap the screen and drag diagonally
to scroll through all the open
applications.
3. Tap
to minimize the application,
or tap End All Tasks to close all
open applications.
To acquire satellite signals more
quickly, take your nüvifone outside to
an area free from tall obstructions.
Switch Between
Applications
1. Press and hold the
key.
Update GPS Data Manually
You can also increase the speed of GPS
positioning by updating your GPS data
regularly.
2. Tap an application to open it.
1. Press the
key.
2. Tap Settings > Navigation > GPS
> GPS Data Update.
3. Tap Update.
16
nüvifone M10 Owner’s Manual
Get to Know Your nüvifone
Status Bar Icons
The icons along the top of the screen indicate the status of various system items.
You can tap some of the icons to access more information.
Type
Icon Description
Call in progress
Call forwarded
Call on hold
Call status
Missed call
GPRS available
General Packet Radio
Service (GPRS)
Connecting using GPRS
connection status*
Connected using GPRS
3rd Generation (3G) service available
HSPA available
* This icon depends
on your location
and mobile service
provider.
EDGE available
nüvifone M10 Owner’s Manual
17
Get to Know Your nüvifone
Messaging status
New messages
Multiple messages; tap the icon to view all
messages.
Battery fully charged
Battery partially charged
Battery charging
Battery status
Signal status
Battery is very low
No cellular phone service
No signal
Number of bars indicate signal strength
Phone off
ActiveSync synchronization in progress
Connecting with ActiveSync
ActiveSync connection not active
Synchronization error
ActiveSync®
connection status
18
nüvifone M10 Owner’s Manual
Get to Know Your nüvifone
Sound on
Sound status
Wi-Fi® status
Sound off
Wi-Fi is available
Wi-Fi connected
Bluetooth technology
headset connection
Bluetooth stereo headset connected
Roaming service. This icon appears if you have
the international roaming feature.
Roaming service
Mode status
Vibrate or Meeting mode on
Speakerphone on
Alarm is set
Speakerphone status
Alarm status
Timer status
Timer is running
SIM card status
No SIM card installed
Location Search
Tap to find information about this location.
GPS searching
GPS off
GPS status
nüvifone M10 Owner’s Manual
19
Use the Phone
Use the Phone
Open the Phone
Application
Use one of the following methods to
open the phone application:
•
•
Press the
key.
From the Home screen, tap Call.
Dial a Number
4. Tap a number in the list to call the
number, or press the key.
1. Press the
key.
2. Tap to open the keypad.
3. Dial the number. As you dial, a list
appears showing similar numbers
you have dialed and contacts that
have matching numbers or letters.
20
nüvifone M10 Owner’s Manual
Use the Phone
•
•
Contacts—view your contacts.
Use In-Call Options
While you are in a call, the following
options appear:
Note—write a note related to this
call. You can view the note by
tapping the call in your call history.
•
Speaker—activate the
speakerphone.
•
—view the following options:
◦
turn Hands-free off—turn
off the hands-free function, if
available.
•
Mute—mute
the audio
input.
◦
◦
◦
Record—record the phone call.
•
•
Hold—place
the current call
on hold.
Calendar—view the calendar.
History—view your call
history.
Add—place a
new call. The
first call is
◦
Conference—start a conference
call, if you have a call on hold
and another call active.
placed on hold.
•
Swap—change between the current
call and the call on hold, if you are
on call waiting.
The phone hides these options if you
are in a call and do not interact with
the phone for 4 seconds. To show the
options again, press the Power key.
nüvifone M10 Owner’s Manual
21
Use the Phone
Record a Phone Call
1. While on a phone call, tap
Record.
Receive a Call
When there in an incoming phone call,
the Incoming Call page appears. Select
an option:
>
2. When finished recording, tap
>
Stop Recording.
•
•
Tap Answer to answer the call.
To listen to the recording press the
key, and then tap Notes.
Tap Ignore to reject the call or send
the call to voice mail, if voice mail
is set up.
End a Call
To end a call, press the
•
Tap Ignore with SMS to send an
SMS/text message to the caller.
This will also send the call to voice
mail, if voice mail is set up.
key.
Set Up Voice Mail
1. Press the
key.
2. Tap Settings > Personal > Phone.
If you answer a call while you are
already on another call, the original
call is placed on hold.
3. From the slider menu at the top of
the screen, select Services.
4. Tap Voice Mail and Text Messages
> Get Settings.
5. Verify that your voice mail number is
correct, and tap OK.
22
nüvifone M10 Owner’s Manual
Use the Phone
To view the other members of the
conference call, tap More.
Call Voice Mail
1. Press the
key.
2. Tap
.
If you receive a call while you are
already on another call, you can
start a conference call by tapping
Conference.
3. Touch and hold 1.
Place a Conference Call
Note: Not all mobile phone networks
support conference call. Contact your
service provider for details.
Speak Privately During a
Conference Call
You can speak privately with another
member of the conference call.
1. Place a call to the first phone
number.
1. During the conference call, tap
2. Tap Add.
More.
3. Place a call to the second phone
number.
2. Tap the contact with whom you
would like to speak privately, and
tap Private. The other members of
the conference call can continue to
speak to each other.
4. Tap Conference.
3. To end the private conversation, tap
Conference.
nüvifone M10 Owner’s Manual
23
Use the Phone
Clear Your Call History
View Call History
1. Press the
key.
1. Press the
key.
2. Tap
3. Tap
.
2. Tap
, if necessary.
> Clear All.
3. Tap a number or a contact in the
list to view your call history for that
number or contact.
Turn Off the Phone
1. Press the
key.
4. If a call in the list is marked with
, tap the call to view the notes
associated with that call.
2. Tap Settings > Wireless Manager
> Phone.
5. Select an option:
Turn on Flight Mode
•
•
•
•
Tap Call or press the
place a call.
key to
1. Press the
key.
2. Tap Settings > Wireless Manager
Tap Text to send a text
message.
> Flight Mode.
When Flight Mode is on, the telephone,
the network, Bluetooth, and GPS
features are deactivated. You cannot
send or receive new e-mail or SMS/
MMS messages.
Tap More to view the contact
information, if available.
Tap
for more options: Save
to Contacts, Delete, and Send
My Location.
24
nüvifone M10 Owner’s Manual
Manage Your Contacts
About Your Company Directory
You can search your company
directory, if available. You must
first set up the device to use your
company’s Microsoft® Exchange
Server. An active Internet connection
is required.
Manage Your Contacts
Add a Contact
1. Press the
key.
2. Tap
>
> New Contact.
3. Tap an option.
4. Tap an item to enter the information.
About the White Pages
Tap Done when finished.
You can search the regional white
pages. This service may be available as
a paid Connected Services subscription
in your area. A data connection is
required for this feature.
5. Tap
to save the contact.
Call a Contact
1. Press the
key.
2. Tap
.
Search a Directory
3. Tap a contact.
1. Press the
key.
4. Tap Phone.
2. Tap
3. Tap More.
4. Select a directory.
>
.
Search for a Contact
1. Press the
key.
2. Tap
>
.
3. Enter the contact name.
nüvifone M10 Owner’s Manual
25
Manage Your Contacts
Navigate to a Contact
Copy from Contacts to
Your SIM Card
1. Press the
key.
TIP: You can also tap Search >
1. Press the
key.
Contacts.
2. Tap Settings > Applications
> Phone and Contacts > SIM
Manager.
2. Tap
.
3. Select a contact.
4. Tap Go!.
3. Tap Menu > Retrieve from
Contacts.
4. Select the contacts that you want to
copy to the SIM card, or tap Menu >
Select All.
Add a Contact to
Favorites
You can include up to 18 contacts in
favorites.
5. Tap Retrieve.
1. Press the
2. Tap
key.
>
.
3. Tap the contact you want to add.
26
nüvifone M10 Owner’s Manual
Manage Your Contacts
Copy Items from Your SIM Add Items to Your SIM
Card to Contacts
Card
1. Press the
1. Press the
key.
key.
2. Tap Settings > Applications
> Phone and Contacts > SIM
Manager.
2. Tap Settings > Applications
> Phone and Contacts > SIM
Manager.
3. Select the SIM card contacts that
you want to copy to your contacts,
or tap Menu > Select All.
3. Tap New.
4. Enter a name and phone number.
5. Tap Done.
4. Tap Menu > Copy to Contacts.
Edit Items On Your SIM Card
5. Tap Copy.
1. Press the
key.
2. Tap Settings > Applications
> Phone and Contacts > SIM
Manager.
3. Select the contact that you want to
edit, and tap Menu > Edit.
4. Edit the name and phone number.
5. Tap Done.
nüvifone M10 Owner’s Manual
27
Search for Locations
Go Home
After you have saved your home
location, you can create a route to it.
Search for Locations
The Search menu provides several
different categories you can use to
search for locations.
Tap Search > Home.
Note: Depending on the version of
the built-in map data on your device,
the button names and the order of steps
could be slightly different than the
following procedures.
Find an Address
1. From the Home screen, tap Search
> Addresses.
2. If necessary, tap
to change the
state, country, or province.
3. To search all cities, tap Search All
Cities. You can also tap Spell City,
enter all or part of the name, and
then tap the city in the list.
Set Your Home Location
You can save a favorite called “Home”
and quickly generate a route to it.
4. Enter all or part of the street name
or number, and tap Done. Tap the
street in the list.
1. From the Home screen, tap Search
> Home.
2. Tap Enter My Address, Use
Current Location, or Use Recent
Finds.
5. Enter the house number and then
tap Done.
6. Tap the correct address in the list.
28
nüvifone M10 Owner’s Manual
Search for Locations
Go! Page Options
After you find a location, an
Find a Nearby Location
1. Find a location.
informational page appears, displaying
the address and the phone number (if
known) of the location.
2. On the information page, tap
>
Find Nearby.
3. Select an option to search for a
location.
➊
➍
Learn About Locations
A data connection is required for this
feature. This service is only available
in some areas.
➋
➌
1. Find a location.
➊
➋
➌
➍
Tap to dial the phone number of
the location, if available.
2. On the information page, tap
> Find Nearby > Connected
Services > WiKiKnow.
Tap to view the location on the
map.
The browser opens to a Web page
containing information about the
selected location.
Tap to create a route to the
location.
Tap for more options.
nüvifone M10 Owner’s Manual
29
Search for Locations
Find a Location Near Your
Route
Send a Found Location
You can find a location and send it to
people using messaging or e-mail.
1. From the Home screen, tap Search.
2. Tap
> Near.
1. Find a location.
3. Tap the appropriate option, and then
2. On the information page, tap
>
tap Done.
Send Location.
Find a Location Near a
Different City
3. Tap an account.
4. To attach a map of your location,
1. From the Home screen, tap Search.
tap Yes.
2. Tap
> Near.
5. To edit the message, tap
6. Tap a contact.
.
3. Tap Near Other.
4. Tap Spell City or Browse Map.
7. Tap send.
5. Find the location, and then tap
Done.
Change the Search Area
By default, your nüvifone finds
locations near your current location.
Find a Point of Interest
The detailed maps loaded in your
nüvifone contain millions of points of
interest, such as restaurants, hotels, and
auto services.
30
nüvifone M10 Owner’s Manual
Search for Locations
Find by Category
1. From the Home screen, tap Search
> Points of Interest.
Find a Location Using
Local Search
Local search enables you to search for
the most current location information.
In addition to searching by spelling the
name of a location, you can also spell
the names of categories, like “salon” or
“coffee.”
2. Tap a category.
3. Tap a subcategory or All
Categories. A list of items near your
current location appears.
4. To narrow the search, tap the
data entry field along the top of
the screen, enter the text, and tap
Done.
Local Search is not available in all
areas. A data connection is required for
this feature.
5. Tap the item you want.
1. From the Home screen, tap Search
Find by Spelling the Name
1. From the Home screen, tap Search
> Points of Interest.
> Local Search.
2. Enter your search term, and tap
Done.
2. Tap Spell Name, enter all or part of
3. Tap the item you want.
the name, and tap Done.
3. Tap the item you want.
tIP: You can also search using Local
Search. Tap Connected Services >
Local Search.
nüvifone M10 Owner’s Manual
31
Search for Locations
Find Favorites
Find Recently Found
Locations
The nüvifone stores the last 40
locations you have found.
1. From the Home screen, tap Search
> Favorites.
2. To search by name, tap the box
at the top, enter all or part of the
name, and tap Done.
1. From the Home screen, tap Search
> Recent Finds.
3. Tap the item you want.
2. Tap the item you want.
Save a Found Location
1. Search for an item.
Find a Location Using the
Map
Use one of the following methods to
open the map to find a location:
2. Tap the item to open the information
page.
3. Tap
> Save to Favorites.
Save My Current Location
1. From the Home screen, tap View
Map.
•
•
Tap Search > Browse Map
Tap View Map and tap anywhere
on the map.
2. Tap the vehicle icon.
3. Tap
> Save to Favorites.
32
nüvifone M10 Owner’s Manual
Search for Locations
Browsing the Map
Find Cities
1. From the Home screen, tap Search
> Cities. A list of cities near your
current location appears.
•
Touch and drag to view different
parts of the map.
•
•
Tap and to zoom in and out.
2. To search by name, tap the edit box
along the top of the screen, enter
the name, and then tap Done.
Tap anywhere on the map. An
arrow points to the location.
•
•
Tap
for more options.
3. Tap a city.
As you zoom out, the map changes
to a digital elevation map showing
the contours of the area.
•
Zoom far out to view a globe.
Touch and drag to spin the globe.
Note: You can only see detailed map
information about areas for which you
have maps loaded on your nüvifone.
nüvifone M10 Owner’s Manual
33
Search for Locations
Find Intersections
Enter Coordinates
1. From the Home screen, tap Search
If you know the geographic coordinates
of your destination, you can use your
nüvifone to navigate there. This can be
especially helpful when geocaching.
> Intersection.
2. If necessary, select the state,
country, or province.
3. To search all cities, tap Search All
Cities. You can also tap Spell City,
enter all or part of the name, and
then tap the city.
1. From the Home screen, tap Search
> Coordinates.
2. Tap a field, and enter the
coordinates.
4. Enter all or part of the first street
name or number, and then tap the
street.
3. When finished, tap Next.
Find Selected Text
You can find location information for
selected text in your Web browser.
5. Enter all or part of the second street
name or number, and then tap the
street.
6. Tap the correct intersection in the
list.
1. Drag to select the text.
2. Tap the status bar.
3. From the slider menu at the top of
the screen, select Search.
4. Select an option to find the location.
34
nüvifone M10 Owner’s Manual
Follow Your Route
Follow Your Route
➊
➌
➋
After you select a location and tap Go!,
your nüvifone creates a route to the
location. Your route is marked with a
magenta line.
➍
➎
➏
➐
➐
➑
As you travel, your nüvifone guides
you to your destination with voice
prompts, arrows on the map, and
directions at the top of the map. A
checkered flag marks your destination.
➊
➋
➌
Tap to view the next turn.
Tap to view the route details.
Tap to view the Traffic menu,
when available. Traffic services
If you deviate from the original route,
your nüvifone recalculates the route
and provides new directions.
require an additional subscription
and data plan charges.
A speed-limit icon may appear as you
travel on major roadways. This icon
displays the current speed limit of the
roadway.
➍
➎
Tap to zoom in and zoom out.
Tap anywhere on the map to
browse the map.
➏
Tap to view the Where Am I?
page.
Use the Navigation Map
From the Home screen, tap View Map
to open the map.
➐
➑
Tap to view the trip computer.
Tap to return to the Home screen.
nüvifone M10 Owner’s Manual
35
Follow Your Route
View the Route Details
When you are navigating a route, you
can view all of the turns for your entire
route and the distance between turns.
See the Next Turn
When you are navigating a route, you
can view the turn on the map and the
distance and time left before you reach
the turn.
Use one of the following methods to
open the route details:
1. While navigating to a destination,
tap the turn bubble on the map, or
tap any turn in the route details list.
•
While navigating to a destination,
tap the text bar on the top of the
map.
2. Tap the arrows to see more turns in
the route.
•
Press the
Route Details.
key. Tap tools >
3. Tap
prompt.
> Speak to play the voice
36
nüvifone M10 Owner’s Manual
Follow Your Route
Use one of the following methods to
open the trip computer:
Junction View
When available for your route, the
map displays a view of the upcoming
junction and in which lane you should
be driving. Tap the turn bubble on the
map to view the junction instead of the
next turn.
•
Tap Speed, Arrival, or Heading on
the map.
•
Press the
Computer.
key. Tap tools > trip
Reset the Trip Computer
Reset the trip computer before
beginning a trip.
View the Trip Computer
The trip computer displays your current
speed and provides helpful statistics
about your trip.
1. While viewing the map, tap Speed,
Arrival, or Heading.
2. Tap
.
If you make frequent stops, leave your
nüvifone turned on so it can accurately
measure elapsed time during the trip.
3. Select an item to reset.
nüvifone M10 Owner’s Manual
37
Follow Your Route
5. Tap Done when finished.
Take a Detour
1. While navigating a route, tap
2. Tap Detour.
You can also add intermediate points to
a route using the Search button.
.
While navigating a route, tap Search
and find an intermediate stop. Tap Go!.
When prompted to add the point as an
intermediate point to the current route,
tap Yes.
If the route you are currently taking
is the only reasonable option, the
nüvifone might not calculate a detour.
Stop the Route
1. While navigating a route, tap
.
Save the Active Route
2. Tap Stop.
You can save the route you are
currently navigating and use it again
later.
Add Points to the Active
Route
1. While navigating a route, tap the
text bar at the top of the map.
1. Press the
key.
2. Tap Tools > Manage My Data >
2. Tap
> Edit.
Routes.
3. Tap Add Start Point or Add End
3. Tap Active Route.
Point.
4. Tap
> Save.
4. Select a method to add an
intermediate point.
5. Tap OK.
38
nüvifone M10 Owner’s Manual
Follow Your Route
transparent—traffic information not
available.
About Traffic
This service may be available as a
paid Connected Services subscription,
and is not available in all areas. A data
connection is required for this feature.
Green—traffic is flowing freely.
Yellow—traffic is moving but there is a
delay, moderate traffic congestion.
Note: Garmin and ASUS are not
responsible for the accuracy of the
traffic information.
Red—traffic is not moving or moving
very slowly, severe delay.
Traffic on Your Route
About the Traffic Icon
When calculating your route, the
nüvifone examines the current traffic
and automatically optimizes the route
for the shortest time. If a severe traffic
delay occurs on your route while
you are navigating, the nüvifone
automatically recalculates the route.
You might still be routed through
traffic if no better alternative routes
exist.
When you are receiving traffic
information, a traffic icon appears
in the upper-left corner of the Map
page. The traffic icon changes color
to indicate the severity of traffic
conditions on your route or on the road
you are currently travelling.
nüvifone M10 Owner’s Manual
39
Follow Your Route
If a non-severe traffic delay occurs on
your route, the traffic icon shows how
much time the delay has added to your
route. This time is already included in
your estimated arrival time.
View the Traffic Map
The traffic map shows color-coded
traffic flow and delays on nearby roads.
1. On the Map page, tap the traffic
icon.
2. Tap Show Traffic Map.
Manually Avoid Traffic on Your
Route
To return to the normal map, tap the
traffic icon, and then tap Show Normal
Map.
1. On the Map page, tap the traffic
icon.
2. Tap Traffic On Route.
View Traffic Delays
1. On the Map page, tap the traffic
icon.
3. Tap Avoid.
You might still be routed through
traffic if no better alternative routes
exist.
2. Tap Traffic Search to view a list of
traffic delays.
3. Tap an item in the list to view the
delay on a map and details about
the delay. If there is more than one
delay, tap the arrows to view the
additional delays.
40
nüvifone M10 Owner’s Manual
Use the Navigation Tools
3. Tap + to zoom in. Tap - to zoom out.
Use the Navigation
Tools
4. Tap a location on the map, and then
tap
for more options.
Use the Where Am I?
Page
The Where Am I? page displays
information about your current
location. This is a helpful feature if you
need to tell emergency personnel your
location.
Browse the Map
1. Use one of the following methods to
open the Browse Map:
1. Use one of the following methods to
open the Where Am I? page:
•
Press the
> Where Am I?.
key, and tap Tools
•
Press the
> Browse Map.
key, and tap Tools
•
Tap View Map, and then tap the
vehicle icon.
•
Tap View Map, and then tap
anywhere on the map.
2. Tap a button to view the nearest
locations in that category.
2. Drag to move the map.
3. Tap
for more options.
nüvifone M10 Owner’s Manual
41
Use the Navigation Tools
Delete a Favorite
Work with Favorites
1. Press the
key.
Save a Location as a Favorite
1. Find the item you want to mark as a
favorite.
2. Tap Tools > Manage My Data >
Favorites.
3. Tap a favorite.
2. On the Go! page, tap
> Save to
4. Tap Delete.
Favorites.
Save My Current Location
1. From the Home screen, tap View
Map.
Work with Routes
Plan a Route
1. Press the
key.
2. Tap the vehicle icon.
2. Tap Tools > Manage My Data >
3. Tap
> Save to Favorites.
Routes.
Edit Favorites
3. Tap
> New.
1. Press the
key.
4. Select a starting point.
2. Tap Tools > Manage My Data >
5. Select a final destination.
Favorites.
6. Add intermediate points as
3. Tap a favorite.
necessary, or tap None.
4. Tap
.
7. Tap your route calculation
preference.
5. Make changes as needed.
8. Tap
> Save to save the route.
42
nüvifone M10 Owner’s Manual
Use the Navigation Tools
Add Points to a Saved Route
Delete a Saved Route
1. Press the
key.
1. Press the
key.
2. Tap Tools > Manage My Data >
2. Tap Tools > Manage My Data >
Routes.
Routes.
3. Tap a route.
3. Tap a route.
4. Tap
> Edit/Review Points.
4. Tap Delete.
5. Tap Add Start Point or Add End
Navigate a Saved Route
Point.
1. Press the
key.
6. Select a method to add an
intermediate point.
2. Tap Tools > Manage My Data >
Routes.
7. Tap Done when finished.
3. Tap the route you want to navigate.
Edit a Saved Route Using the
Map
4. Tap Go!.
1. Press the
key.
2. Tap Tools > Manage My Data >
Routes.
3. Tap a route.
4. Tap
5. Tap a point on the map.
6. Tap > Add.
> Shape Route.
nüvifone M10 Owner’s Manual
43
Use the Navigation Tools
Simulate a Route
If the GPS is off, you can simulate
driving a route.
Edit Avoidances
1. Press the
key.
2. Tap Settings > Navigation >
Routing > Avoidance Setup >
> Custom > View List.
1. Press the
key.
2. Tap Settings > Navigation > GPS
3. Tap the avoidance you want to edit.
4. Select an option.
> GPS Status >
GPS.
> Disable
3. Find a destination and tap Go!.
Deactivate Avoidances
4. Tap Tools > Simulate Route.
1. Press the
key.
2. Tap Settings > Navigation >
Avoid a Road or Area
Routing > Avoidance Setup.
1. Press the
key.
3. Clear the avoidance check box.
2. Tap Settings > Navigation >
Routing > Avoidance Setup >
> Custom > Add New Road or
Add New Area.
3. Select the road or area you want to
avoid, and tap Next.
4. Tap OK to save the avoidance.
44
nüvifone M10 Owner’s Manual
Use the Navigation Tools
After you save a track, it is
Work with Tracks
recommended that you clear the track
memory by tapping Clear Active
track.
Record a Track
You can record the path you travel
(called a “track”) and view it as a
dotted line on the map.
Saved tracks appear on the map
automatically.
1. Press the
key.
2. Tap Tools > Manage My Data >
View and Rename a Saved
Track
Tracks.
1. Press the
key.
3. Tap
> Settings.
2. Tap Tools > Manage My Data >
4. Select the recording options.
Tracks.
After you record tracks, you can save
them and view them on the map.
3. Tap a track.
4. To view the track on the map, tap
Save a Track
> Map.
1. Press the
key.
5. To rename or delete the track, tap
> Rename, and then select an
option.
2. Tap Tools > Manage My Data >
Tracks.
3. Tap
> Save Active Track.
4. Tap Save.
nüvifone M10 Owner’s Manual
45
Use Connected Services
Find Fuel Prices
Use Connected
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
Services
About Connected
Services
Use Connected Services to search for
location-relevant information such
as live weather data, flight status,
and photos. You can also access local
search using the Internet.
1. From the Home screen, tap
Connected Services.
2. Tap Fuel Prices.
3. Tap
> Change Category.
. A list
4. Tap a fuel type, and tap
of fuel prices near your current
location appears.
Not all services are available in all
areas.
5. To sort the list by lowest price, tap
Sort. To sort by distance, tap Sort
again.
Additional services are available with a
subscription. For more information, go
6. Tap an item in the list.
tIP: You can also find fuel prices
under Search > Points of Interest >
Fuel > Fuel Prices.
Your phone must have a data
connection to access Connected
Services. Your regular data transfer
charges apply.
46
nüvifone M10 Owner’s Manual
Use Connected Services
Find Local Events
Find Movie Times
Search for upcoming events, such as art This service may be available as a paid
shows and sporting events. This service Connected Services subscription in
may be available as a paid Connected
Services subscription in your area. A
data connection is required for this
feature.
your area. A data connection is required
for this feature.
1. From the Home screen, tap
Connected Services.
1. From the Home screen, tap
2. Tap Movie Times.
Connected Services.
3. Tap the arrows or the date to select
a different date, if necessary.
2. Tap Local Events.
3. Tap a category.
4. Tap Find by Movie Title or Find by
Movie Theater.
4. Tap the arrows or the date to select
a different date, if necessary.
5. Tap a movie title and a theatre.
5. Tap an event to view more
information.
6. Tap a show time to add it as an
appointment on your calendar. If the
movie begins within two hours of
the current time, you can tap Go! to
create a route.
6. To add the event as an appointment
on your calendar, tap Remind Me!.
If the event begins within two hours
of the current time, you can tap Go!
to navigate to the event.
tIP: You can also find movie times by
tapping Search > Points of Interest >
entertainment > Movie times.
tIP: You can also find local events by
tapping Search > Points of Interest >
entertainment > Local events.
nüvifone M10 Owner’s Manual
47
Use Connected Services
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
Find Parking
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
1. From the Home screen, tap
Connected Services.
1. From the Home screen, tap Search
> Points of Interest > Auto
2. Tap Safety Cameras.
Services > Connected Parking.
3. Tap a region or regions in the list,
and then tap Done.
2. Tap a location in the list to view
more information.
Use the White Pages
Phone Directory
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
Download Safety
Cameras
CAUTION
Garmin and ASUS are not
responsible for the accuracy of, or the
consequences of using, a custom point
of interest (POI) or a safety camera
database.
48
nüvifone M10 Owner’s Manual
Use Connected Services
Find by Name
View GeoNews
1. From the Home screen, tap
Connected Services.
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
2. Tap White Pages > By Name.
3. Enter the last name, and tap Done.
4. Enter the first name (optional), and
1. From the Home screen, tap
tap Done.
Connected Services.
5. Enter the postal code, if necessary.
2. Tap GeoNews.
6. To search near a different location,
3. To select a different location, tap
> GeoNews Near, and select a
location.
tap Near, and tap a location.
Find by Phone Number
This search feature is not available in
some areas.
4. Tap a news service.
5. Tap an item in the list to view
details.
1. From the Home screen, tap
Connected Services.
2. Tap White Pages > By Phone
Number.
3. Enter the area code and phone
number, and tap OK.
nüvifone M10 Owner’s Manual
49
Send Messages
Send a Multimedia
Message (MMS)
Send and Receive
Messages
Your regular messaging fees apply
1. From the Home screen, tap Text.
2. Tap
> New > Multimedia
when sending and receiving messages.
Message.
3. Tap Select.
Send an SMS/Text
Message
4. Enter a recipient, or tap Menu
> Recipient to select from your
Contacts list.
1. From the Home screen, tap Text.
2. Tap
> New > Text Message.
> Add
5. Tap below the subject line to attach
an image or video.
3. Enter a recipient, or tap
Recipient to select from your
Contacts list.
6. Tap Menu > Insert, and select an
item to insert.
4. Enter the text message.
7. Tap Send to send the message.
5. Tap
to send the message.
50
nüvifone M10 Owner’s Manual
Send Messages
Create a Voice MMS
Message
Send a Location Message
CAUTION
1. From the Home screen, tap Text.
Use caution when sharing your location
information with others.
2. Tap
> New > Voice MMS.
3. Enter a recipient.
Location messages allow you to send
your current location information to
other people. Sending a map image
requires MMS picture messaging
support on the phones of both the
sender and the receiver.
4. Tap Record to record the voice
message.
5. Tap Stop to stop recording the
voice message.
6. Tap Send to send the message.
1. Create a message, and then tap
> Location Info.
2. Follow the instructions on the
screen.
3. To attach a map of your location,
tap Yes.
4. To edit the message, tap
.
5. Tap to send the message.
nüvifone M10 Owner’s Manual
51
Send Messages
You can also send location messages
when you view a contact, when you
finish a phone call, or when you find a
location.
Reply to a Message
1. From the Home screen, tap Text.
2. Tap a message.
3. Tap
4. Enter the reply message.
5. Tap to send the message.
.
Read Messages
A number appears on the Text icon
showing the number of unread
messages in your inbox.
Forward a Message
1. From the Home screen, tap Text.
2. Tap a message.
1. From the Home screen, tap Text.
The inbox appears, containing Short
Message Service (SMS) messages
and Multimedia Messaging Service
(MMS) notifications/messages
3. Tap
> Forward.
4. Enter the number or address to
which you want to forward the
message.
received from other devices.
Unread messages are displayed in
bold.
2. Tap a message to read it.
52
nüvifone M10 Owner’s Manual
Send Messages
Delete Messages
Set Up an E-mail Account
Your nüvifone can automatically
configure account information for some
e-mail accounts.
1. From the Home screen, tap Text.
2. Tap a message.
3. Tap
> Delete. The message is
moved to the Deleted Items folder.
If additional information is required,
see your e-mail account provider.
tIP: If you have a Windows Live™ ID,
To recover a deleted message, move
the message back from the Deleted
Items folder.
you can set up your e-mail account by
To empty the Deleted Items folder, tap
pressing the
key, and then tapping
> tools > empty Deleted Items.
If a message is deleted from the
Deleted Items folder, it cannot be
recovered.
1. From the Home screen, tap E-mail.
2. Enter your e-mail address and
password.
3. Tap Next to obtain your e-mail
settings from the Internet.
4. Follow the on-screen instructions to
set up your e-mail account on your
device.
nüvifone M10 Owner’s Manual
53
Send Messages
Send an E-mail Message
Manually Send/Receive
E-mail Messages
1. From the Home screen, tap E-mail.
2. Tap
3. Enter an e-mail address in the To
field, or tap > Add Recipient
> New.
1. From the Home screen, tap E-mail.
2. Tap an e-mail account.
3. Tap
> Send/Receive.
to select from your Contacts list.
Separate multiple e-mail addresses
with a semicolon (;).
4. To stop this process, tap
> Stop
Send/Receive.
4. Enter your message in the message
field.
Synchronize E-mail
Messages
5. Tap
to send the message.
You can include e-mail messages as
part of the general synchronization
directly to an e-mail server, see the
ActiveSync Help file.
If you are working offline, e-mail
messages are saved to the Outbox
folder and sent the next time you
connect.
Read an E-mail Message
1. From the Home screen, tap E-mail.
2. Tap an e-mail message to view it.
tip: To quickly show a different e-mail
account, scroll the screen horizontally.
54
nüvifone M10 Owner’s Manual
Connect with Friends
Register Your Device
Connect with Friends
1. Press the
key.
Use Ciao!™
A data connection is required for this
feature. Ciao! is not available in all
areas.
2. Tap Ciao!.
3. Read and accept the on-screen
messages.
4. Tap Register. The Web browser
launches.
Ciao! periodically sends your location
to our partner networks and downloads
the most recent location of your
friends. This application only submits
your location when you tell it to, unless
you enable automatic updates.
5. Follow the steps to register your
device. After registering, you will
receive an SMS message for
verification.
6. Open the SMS message, and tap
the link to complete the verification
process.
Note: Use caution when sharing your
location information with others. Go
Garmin online privacy statement.
You can also register your device at
nüvifone M10 Owner’s Manual
55
Connect with Friends
Join Ciao!
Before you join Ciao! for the first time,
you must register your device.
Invite a Friend by Phone
Number
1. Press the
key.
2. Tap Ciao! > Invite > Phone
1. Press the
key.
Number.
2. Tap Ciao!.
3. Enter the phone number.
3. Read and accept the registration
information.
4. To change the country, tap the
button below Friend’s Country,
and select a country.
4. Tap a type of location update,
Manual or Automatic.
5. Tap Done.
5. Enter a display name, and tap
6. Select the network your friend is
using. If your friend is using Ciao!,
you can select any network in the
list. Tap OK.
Done.
6. Tap Complete. Your location is
updated, and it becomes available
in the network.
Accept or Decline an Invitation
Change Your Display Name
1. Press the
key.
1. Press the
key.
2. Tap Ciao!.
2. Tap Ciao! > My Details
>
3. Tap the friend that sent you the
invitation.
Change Name.
3. Enter a new name, and tap Done.
4. Tap Accept or Decline.
56
nüvifone M10 Owner’s Manual
Connect with Friends
Update your Status
View Friends
1. Press the
key.
Your list of friends shows the status,
distance to, and direction to your
friends.
2. Tap Ciao! > My Details > Change
Status.
3. Enter a new status message, and
1. Press the
key.
tap Done.
2. Tap Ciao!.
Send a Location Update
3. Tap a friend in the list. The status
and location information for the
friend appears.
1. Press the
key.
2. Tap Ciao! > My Details > Send
Update.
4. Tap Go! to create a route to the
friend, or tap Map to view the
friend’s location on the map.
To change how you update your
location information, tap
Updates, and select an option.
> Change
To view all of your friends on the map,
tap Ciao! >
> View Map.
nüvifone M10 Owner’s Manual
57
Connect with Friends
Remove an Invitation
View Ciao! Networks
1. Press the
key.
If a friend is marked Invited, you have
invited the friend, but the friend has not
accepted or declined the invitation.
2. Tap Ciao! >
> Privacy >
>
>
Networks.
1. Press the
key.
Disable Ciao!
1. Press the
key.
> Privacy >
2. Tap Ciao!.
2. Tap Ciao! >
3. Tap an invited friend in the list.
Disable Ciao!.
4. Tap Remove Invitation.
All the Ciao! information stored on
your device is removed. You no longer
send any position updates.
Hide Your Location
Tap Ciao! >
> Hide. Your current
location is hidden from your friends.
To enable Ciao!, you must join Ciao!
again.
To stop hiding, tap Ciao! >
Hiding.
> Stop
Remove a Friend
1. Press the
key.
2. Tap Ciao!.
3. Tap a friend in the list, and tap
>
Remove.
4. Tap Yes.
58
nüvifone M10 Owner’s Manual
Connect with Friends
Send a Message
Connect with Friends on
Facebook™
1. From the Home screen, tap
Facebook.
Facebook is not available in all areas.
Before using Facebook, you need to
create a Facebook account. Tap Sign
up and follow the on-screen directions
to create an account, if necessary.
2. Tap
> Compose.
3. Tap Add, and select a contact.
4. Tap next to Subject, and enter a
subject.
5. Tap the main area to enter the
message.
Sign In to Facebook
1. From the Home screen, tap
Facebook.
6. Tap Send.
2. Enter your e-mail and password.
Use Messenger
3. Tap the check box next to Save
1. Press the
key.
Login, if necessary.
2. Tap Messenger and sign in. (See
4. Tap OK.
page 86.)
5. Read the terms of use, and tap I
3. Update your status and
Agree.
communicate with your contacts.
Update your Status
1. From the Home screen, tap
Facebook.
2. Tap
your status update.
3. Tap Post.
> Update >
, and enter
nüvifone M10 Owner’s Manual
59
Use the Browser
Use the Browser
➊
➋
Search the Internet
1. From the Home screen, tap Internet
Explorer.
➌
2. Tap the Web tab, if necessary.
3. Enter a search term or a URL, and
tap
.
4. Tap the Web site you want to open.
Look Up a Term in a Wiki
Web Site
➍ ➎ ➏
Tap to open and edit your list of
favorite Web sites.
➊
1. From the Home screen, tap Internet
Explorer.
➋
➌
➍
Tap to open the URL.
Tap to zoom in and out.
2. Tap the WiKiKnow tab.
3. Enter a search term, and tap
.
Tap to return to the previous Web
page.
Use the Browser
Tap
to show the browser controls.
➎
➏
Tap to open the keyboard.
Tap to access more options.
60
nüvifone M10 Owner’s Manual
Use the Browser
Adjust the Web Page View Save a Web Page to
1. From the Home screen, tap Internet
Favorites
1. From the Web page you want to
Explorer.
2. Tap
3. Tap View.
4. Select a view:
>
.
add, tap
>
>
.
2. Enter a name, if necessary.
3. Tap OK.
•
•
•
Mobile—display Web pages
designed for viewing on mobile
devices.
Desktop—display Web pages
as they appear when using a
desktop computer.
Automatic—automatically
display the Web pages in the
optimal view.
nüvifone M10 Owner’s Manual
61
Read the News
Manually Update Articles
Read the News
1. Press the
key.
2. Tap Newstation.
3. Tap a category.
4. Tap Menu.
Use Newstation
Newstation delivers breaking news
and headline news to your device by
retrieving the most current news from
various Internet news sources.
5. Tap Update to update the RSS
feeds in the selected channel, or tap
Update All to update the RSS feeds
for all channels.
Your device must be connected to the
Internet to use Newstation.
Your news articles are stored as RSS
news feeds on your device. You
may read the articles without being
connected to the Internet.
Automatically Update Articles
1. Press the
key.
2. Tap Newstation.
3. Tap Menu > Settings.
Read News Articles
4. Select an option to set the
automatic update parameters.
1. Press the
key.
2. Tap Newstation.
3. Tap a category and a channel.
4. Tap an article.
5. Tap Menu for more options.
62
nüvifone M10 Owner’s Manual
Read the News
Create a New Category
Edit a Channel
1. Press the
key.
1. Press the
key.
2. Tap Newstation.
2. Tap Newstation.
3. Tap Menu > New Category.
4. Enter a category name.
3. Tap a category, and tap a channel.
4. Tap Menu > Properties.
5. Change the information for the
channel.
Add a Channel
1. Press the
key.
6. To automatically update the
selected channel, select the Auto
update this channel check box.
2. Tap Newstation.
3. Tap a category.
4. Tap Menu > New Channel.
5. Select an import method:
7. Tap Done when you are finished.
Export Content
•
Tap Input from URL, enter the
URL address, and tap Next.
1. Press the
key.
2. Tap Newstation.
•
Tap Import from a file > Next.
Select a folder and a file. Select
a channel, and tap Next.
3. Tap Menu, and select an item to
export.
4. Enter the necessary information.
6. Select a category for this new
channel.
7. Tap Finish.
nüvifone M10 Owner’s Manual
63
Read the News
Add a New Channel
Set Up SMS Cell
Broadcast
If SMS Cell Broadcast is supported by
your service provider and region, you
can receive text messages broadcast to
multiple subscribers in the area.
1. Press the
key.
2. Tap Settings > Personal > Phone.
3. From the slider menu at the top of
the screen, select Channel.
4. Tap Set Channels > New.
5. Enter the channel name and
1. Press the
key.
number, and tap OK.
2. Tap Settings > Personal > Phone.
3. From the slider menu at the top of
the screen, select Channel.
4. Select the Enable SMS Cell
Broadcast check box.
5. Tap Set Languages, select one or
more languages, and tap OK.
6. Tap Set Channels, select one or
more channels, and tap OK.
64
nüvifone M10 Owner’s Manual
Play Music
Play a Song
Play Music
The music player supports the
following file types:
1. From the Home screen, tap Music
>
.
2. Tap a category. Drag the slider
menu at the top of the screen to
view more categories.
•
•
•
•
MP3
WMA
3. Tap a subcategory, if necessary.
AAC/AAC+
WAV
4. Tap a song in the list. The music
player plays the song and the
following songs in the list.
The music library automatically
includes all songs you have saved in all
of the following locations:
5. Tap the progress bar and drag to
jump to a different point in the song.
6. Tap
for more options.
•
•
•
My Documents\My Music
My Storage\My Music
Storage Card\My Music
For more information on copying files
from your computer to your device, see
ActiveSync Help on your computer.
nüvifone M10 Owner’s Manual
65
Play Music
Use the Headset to
Control Playback
1. Plug the headset into the headset
jack on top of the phone.
Save a Song as a Ring
Tone
1. From the Home screen, tap Music
>
.
2. From the Home screen, tap Music
2. Select a song.
>
, and play a song.
3. Tap
> Save as Ring Tone.
3. If you are listening to music in
the background while you are
using another application, press
the headset button once to begin
controlling music playback.
4. Touch and drag the pointers to
select the portion of the song you
want to save as a ring tone.
5. Tap Preview to play a preview of
the selected portion of the song.
4. Use the controls on the headset
cable:
6. Tap Save.
•
Press the button once to
pause the song, and to resume
playback.
•
•
Press the button twice to skip to
the next song in the list.
Turn the knobs on the headset
cable to adjust the volume.
66
nüvifone M10 Owner’s Manual
Take and View Pictures and Videos
2. Tap
>
.
Take and View
Pictures and Videos
Note: Remove the plastic film from
the camera lens before using the
camera.
3. Tap Video or MMS Video.
4. Tap
out.
to zoom in or
to zoom
5. Tap
6. Tap
to start recording the video.
to stop recording the video.
Take a Picture
Send a Picture or Video
1. After taking the picture or video, tap
for more options.
1. From the Home screen, tap
Camera.
2. Aim the viewfinder.
2. Tap Send via e-mail or Send via
MMS.
3. Tap
to take a picture.
3. Enter a recipient, or tap
Recipient to select a contact.
4. Enter a message, and tap
> Add
Take a Picture with GPS
Information
.
1. From the Home screen, tap
Camera.
2. Tap
>
> GPS.
3. Aim the viewfinder, and tap
.
Record a Video
1. From the Home screen, tap
Camera.
nüvifone M10 Owner’s Manual
67
Take and View Pictures and Videos
Change the Advanced Settings
Some settings are only available in
Camera or Video mode.
Change the Camera and
Video Settings
1. From the Home screen, tap
Camera.
1. From the Home screen, tap
Camera.
2. Tap
for more options.
2. Tap
•
>
.
—adjust the exposure.
Resolution—select a quality.
The finer the quality, the larger
the file size.
—adjust the White Balance.
Select a setting, such as
Sunny or Cloudy, to achieve
the color that you want in your
photos.
•
•
Self-timer—select a count-down
time for taking self-portraits.
—select to take 3 Pictures with
each tap or only 1 (Off).
Effect—select an effect: None,
Black-and-White, Negative, or
Sepia.
—open the advanced camera
settings.
•
•
•
Metering Range—select a
metering range.
—open Media Gallery.
Wide Screen—turn on to take
wider pictures.
Shutter Sound—play a sound
when you take a photo.
68
nüvifone M10 Owner’s Manual
Take and View Pictures and Videos
•
•
•
•
•
Preview Time—select a length
of time to preview the pictures
you take prior to saving them.
Copy Pictures and Videos
to Your Device
Copy pictures and videos from your
computer to the following folders on
your device:
Recording Format—select a
video recording format: MP4,
3GP, or H264.
Recording with Audio—select
to record video with or without
audio.
•
•
•
\My Documents\My Pictures
\My Storage\My Pictures
\Storage Card\My Pictures
Save To—select the location
to which you want to save the
pictures you take.
For more information on copying
files from your Computer to your
device, see ActiveSync Help on your
Computer.
Power Saving Mode—select a
length of time before the camera
will go into power saving mode.
Your device supports the following file
types:
•
•
AC Frequency—select a
frequency.
•
•
Picture: JPG, PNG, BMP, GIF
Video: 3GP, WMV, MP4, H264
Restore Defaults—restore the
original settings.
nüvifone M10 Owner’s Manual
69
Take and View Pictures and Videos
View Pictures
1. From the Home screen, tap Media
Delete a Picture or Video
1. From the Home screen, tap Media
Gallery.
Gallery.
2. From the slider menu at the top
of the screen, select a category, if
necessary.
2. Tap a picture.
3. Tap the screen to view additional
buttons.
3. Drag vertically to view additional
pictures, if necessary.
4. Tap
.
4. Tap a picture.
View a Slideshow
•
Tap + to zoom in. Tap – to zoom
out. Touch and drag to quickly
zoom.
1. From the Home screen, tap Media
Gallery.
2. Tap a picture.
•
Double-tap the picture to
zoom in to the maximum level.
Double-tap to zoom out.
3. Tap the screen to view additional
buttons.
4. Tap
.
•
•
After you zoom in, drag to view
different areas of the picture.
Slideshow Tips
•
Tap the screen to display the
Slideshow controls.
Touch and drag horizontally to
view other pictures.
5. Tap the screen to view additional
buttons.
•
Rotate the device to change the
orientation of the pictures in the
slideshow.
6. Tap
to view more options.
70
nüvifone M10 Owner’s Manual
Take and View Pictures and Videos
Play a Video
Upload Pictures and
1. From the Home screen, tap Media
Video
Gallery.
If you have a Gmail™ or Google Mail™
Web mail service, you can upload
pictures and video to Picasa™ photo
organizing software.
2. From the slider menu at the top
of the screen, select a category, if
necessary.
3. Tap a video.
1. From the Home screen, tap Media
4. Tap
.
Gallery.
5. Tap the screen to view the video
controls.
2. From the slider menu at the top
of the screen, select a category, if
necessary.
6. Drag the progress bar to jump to a
different spot in the video.
3. Tap a picture or a video.
7. Tap
to delete the video from the
4. Tap
> Send and Upload >
device memory.
Picasa Web Albums.
8. Tap
for more options.
5. Enter your account information, if
necessary, and tap Done.
6. Tap Caption, and enter a caption
for the image or video, if necessary.
7. Tap Upload.
nüvifone M10 Owner’s Manual
71
Take and View Pictures and Videos
Play a Stream at a Specific
Point
Change Media Gallery
Settings
1. Play a stream from the network.
1. Press the
key.
2. Touch and drag the slider to where
you want to continue playback (on-
demand streaming only).
2. Tap Settings > Applications >
Media Gallery.
3. Select an item to change.
Manage Bookmarks
1. While the stream is playing, tap
Menu > Add to Bookmark.
Play a Video Stream
1. Press the
key.
2. Tap Menu > Bookmark Manager to
manage the Bookmarks and create
new folders.
2. Tap Streaming Player > Open.
3. Tap Connect with tracking history
or manual input, manually enter
the stream URL, or select it from the
drop-down list in the History link.
3. While adding/editing a bookmark
entry, confirm or change the name
and select a folder in which to store
the bookmark entry.
4. To select a link from a bookmark,
tap Connect with Bookmark.
5. Tap Connect to start streaming.
72
nüvifone M10 Owner’s Manual
Take and View Pictures and Videos
MPEG-4 EULA
AVC EULA
This product is licensed under the
MPEG-4 Visual Patent Portfolio
License for the personal and non-
commercial use of a consumer for (i)
encoding video in compliance with
the MPEG-4 visual standard (“MPEG-
4 Video”) and/or (ii) decoding
MPEG-4 video that was encoded by
a consumer engaged in a personal
and non-commercial activity and/or
was obtained from a video provider
licensed by MPEG LA to provide
MPEG-4 video. No license is granted
or shall be implied for any other use.
Additional information including that
relating to promotional, internal, and
commercial uses and licensing may be
obtained from MPEG LA, LLC. See
This product is licensed under the
AVC Patent Portfolio License for the
personal and non-commercial use
of a consumer to (i) encode video in
compliance with the AVC standard
(“AVC Video”) and/or (ii) decode
AVC video that was encoded by
a consumer engaged in a personal
and non-commercial activity and/or
was obtained from a video provider
licensed to provide AVC video.
No license is granted or shall be
implied for any other use. Additional
information may be obtained from
MPEG LA, LLC. See www.MPEGLA
.com.
nüvifone M10 Owner’s Manual
73
Organize Your Life
Schedule an Appointment
Organize Your Life
1. Press the
key.
Synchronize your phone with your
computer to keep your task list and
calendar up-to-date in both locations.
2. Tap Calendar >
> New
Appointment.
3. Enter information about the
appointment.
Use the Calendar
4. To make this appointment recurring,
Use the calendar to schedule
appointments. If you use Microsoft
Office® Outlook® on your computer,
you can synchronize your calendar
between your phone and computer. See
tap Occurs, and select an option.
5. Tap OK.
Change the View
1. Press the
key.
2. Tap Calendar >
> View.
3. Select a view, such as Agenda or
View Appointments
Month.
1. Press the
key.
tIP: To quickly change the view, tap
.
2. Tap Calendar.
3. Drag the screen horizontally to view
a different date.
74
nüvifone M10 Owner’s Manual
Organize Your Life
4. Tap an airport in the list.
5. Select an option to find a flight:
Navigate to an Appointment
You can create a route to an
appointment in your calendar.
•
•
•
Flight Number—enter a flight
number, and then tap Done. Tap
a flight in the list.
1. From your calendar, tap an
appointment.
Departures—tap an option,
enter the appropriate data, and
then tap a flight in the list.
2. Tap Menu > Location Info.
3. Select an option to find the
appointment location.
Arrivals—tap an airline, and
then tap a flight in the list.
4. Tap the location.
5. Tap Go!.
6. If your flight has multiple
connections, tap
and then tap the next flight.
> Next Leg,
Check Flight Status
This service may be available as a paid
Connected Services subscription in
your area. A data connection is required
for this feature.
tIP: You can also check the flight
status by tapping Search > Points of
Interest > transportation > Flight
Status.
1. Press the
key.
2. Tap Flight Status.
3. To view flight information from an
airport in another city, tap
> New
City.
nüvifone M10 Owner’s Manual
75
Organize Your Life
Check the Weather
A data connection is required for this
feature.
View Stock Information
1. Press the
key.
2. Tap MSN Money.
3. Tap Refresh to update the stock
1. Press the
key.
prices.
2. Tap Weather. Weather data for your
current location appears.
Add a Stock
1. Press the
3. Select an option:
key.
•
•
To view details, tap a day.
2. Tap MSN Money > Menu >
Settings > Add Stock.
To show weather for a different
location, tap
> New City,
3. Tap the data entry field at the top of
the screen.
and spell a city name.
4. Enter the stock name, and tap
View Weather for Other Cities
Search.
1. Press the
key.
5. Tap
to add the stock.
2. Tap Weather >
> Add and
Remove Cities > Add.
3. Enter the city name, and tap Done.
tIP: To change the units of measure,
76
nüvifone M10 Owner’s Manual
Organize Your Life
Filter and Sort the Task List
Use Tasks
1. Press the
key.
The task list is your “things to do” list.
If you use Microsoft Office Outlook on
your computer, you can synchronize
tasks between your phone and
2. Tap Tasks >
> Sort by.
3. Select a sort option or
and select a category.
> Filter,
Use the Alarms
Create a Task
Set an Alarm
1. Press the
1. Press the
key.
> New Task.
key.
2. Tap Tasks >
2. Tap Clock >
>
> Add
3. Enter the task name and details,
Alarm.
and tap OK.
3. Use the arrows to set the alarm
time.
Mark a Task as Completed
1. Press the
key.
4. Customize the alarm as necessary.
2. Tap Tasks.
5. Tap Done to save this alarm.
3. Tap the check box next to the task.
Turn Off an Alarm
1. Press the
key.
2. Tap Clock >
.
3. Clear the check box next to the
alarm.
nüvifone M10 Owner’s Manual
77
Organize Your Life
Edit an Alarm
Add a World Clock
1. Press the
key.
.
1. Press the
key.
2. Tap Clock >
2. Tap Clock >
>
> Add World
3. Tap
to edit.
next to the alarm you want
Clock.
3. Tap a region, and tap Next.
4. Edit the alarm as needed.
4. Tap a city, and tap Done.
5. Tap Done to save the changes.
The city now appears in the World
Clock list. The time in that city is listed
in the far-right column.
Delete an Alarm
1. Press the
key.
2. Tap Clock >
.
Delete a World Clock
3. Tap
next to the alarm you want
1. Press the
key.
to delete.
2. Tap Clock >
>
> Delete.
4. Tap
> Delete Alarm.
3. Select the clock you want to delete,
and tap OK.
78
nüvifone M10 Owner’s Manual
Organize Your Life
Use the Count-down
Timer
Convert Currency
A data connection is required for this
feature.
1. Press the
key.
2. Tap Clock >
.
1. Press the
key.
3. Tap the arrows to set the timer.
2. Tap Currency Converter.
4. Tap Ringtone, select a ringtone,
3. To change the currency, tap a
currency button, and tap a currency.
and tap
.
NOTE: You must have the system
volume turned on to hear the timer
ringtone.
4. Repeat to change the second
currency.
5. Tap the rectangle below the
currency you want to convert.
5. Tap Start to begin the count-down.
6. Enter the number, and tap Done.
Use the Stopwatch
Update Conversion Rates
1. Press the
key.
1. Press the
key.
2. Tap Clock >
> Start.
2. Tap Currency Converter.
3. Tap Lap to mark a lap.
3. Tap Update.
4. Tap Stop.
The nüvifone accesses Connected
Services to update the conversion rates.
5. To reset the stopwatch, tap Reset.
This will clear your lap information.
nüvifone M10 Owner’s Manual
79
Organize Your Life
Set the Default Input Mode for
Notes
Use the Calculator
1. Press the
key.
1. Press the
key.
2. Tap Calculator.
2. Tap Notes >
> Options.
3. Tap the calculator to perform the
calculation.
3. Tap Typing for the Default mode.
4. Tap OK when finished.
Type a Note
Record a Voice Note
1. Press the
key.
1. Press the
key.
2. Tap Notes >
>
.
2. Tap Notes.
3. Use the keyboard to type your note.
3. Tap
4. Tap
> View Recording Toolbar.
4. Tap OK to save the note.
to begin recording.
Delete a Note
1. Press the
5. Place the receiver near your mouth
or another source of sound.
key.
2. Tap Notes.
6. Tap
when finished recording.
3. Tap and hold the note you want to
delete until the menu appears.
View Adobe® PDFs
1. Press the
key.
4. Tap Delete > Yes.
2. Tap Adobe Reader LE.
3. Tap the file to open it.
4. Tap Tools to zoom, find keywords,
adjust the view, and go to a specific
page.
80
nüvifone M10 Owner’s Manual
Organize Your Life
Download Applications
Use Microsoft Office
Mobile
Use the Windows® Marketplace to
download and install applications.
Your device comes with pre-installed
Microsoft Office Mobile applications.
These applications are compatible with
the Microsoft Office 2007 PC versions.
Use these applications like you would
normally use the Office applications on
your computer.
1. Press the
key.
2. Tap Marketplace.
3. Follow the on-screen instructions.
Access Your nüvifone
Data Using Your
Computer
1. Press the
key.
2. Tap Office Mobile.
1. Press the
key.
3. Tap an application.
2. Tap Microsoft My Phone.
4. Tap a file to open it, or tap New to
3. Enter your Windows Live e-mail
address and password.
create a new file.
5. Tap Menu to access more options.
4. Tap Sign In.
6. Tap OK to save and close the file.
5. Tap Next and follow the on-screen
instructions to complete the
enrollment.
Note: You can only view
PowerPoint® presentations on your
nüvifone. You cannot create or edit
presentations.
After you are enrolled, you can access
the data that is on your phone using
your computer at http://myphone
nüvifone M10 Owner’s Manual
81
Organize Your Life
Restore
1. Press the
Backup and Restore Files
key.
Notice
2. Tap Backup > Restore.
Some system functions may be
suspended or terminated during the
backup process or the restore process.
When finished, restart your device to
revive suspended functions.
3. Select the backup file you want to
restore, and tap Next.
4. Follow the on-screen instructions to
restore the backup file.
Search for Files
Backup
Search for files and other items stored
in your device. You can search by file
name or by words located in various
applications.
Note: If you enter a password
when you create the backup file, you
will need the password to restore the
backup file.
1. Press the
key.
1. Press the
key.
2. Tap Search Phone.
3. Enter the file name or a word.
4. Select the data type.
5. Tap Search.
2. Tap Backup > Backup.
3. Select the items you want to back
up, and tap Next.
4. Follow the on-screen instructions to
create the backup file.
tIP: Backup POIs, Favorites, settings,
contacts, and bookmarks before
updating the nüvifone software.
82
nüvifone M10 Owner’s Manual
Synchronize Your nüvifone
Install and Configure
Synchronize Your
nüvifone
You can synchronize contents and
transfer data between your device
and your computer using Microsoft
ActiveSync on Windows XP operating
systems.
ActiveSync on Your
Computer
1. Insert the Getting Started CD-ROM
in your computer’s CD-ROM drive.
2. Follow the on-screen instructions.
3. Connect your device to the
computer using the micro-USB
cable or Bluetooth technology. See
During synchronization, ActiveSync
compares the data in your device with
the data in your computer or Exchange
Server, and updates all data with recent
changes.
4. Follow the on-screen instructions to
complete the wizard.
5. Disconnect the device after the
synchronization is complete.
For detailed information about
ActiveSync, see the ActiveSync Help
file.
If you set your nüvifone to ActiveSync
mode, each time you connect your
nüvifone to your computer, your
nüvifone is automatically synchronized
with your computer.
To synchronize on Windows Vista
operating systems, use Microsoft
Windows Mobile Device Center. Go to
nüvifone M10 Owner’s Manual
83
Synchronize Your nüvifone
Synchronize Using the
USB Cable
Synchronize Using
Bluetooth® Technology
1. Install ActiveSync on your computer.
Your computer must have a Bluetooth
component to synchronize using
Bluetooth technology.
2. Connect the micro-USB plug to the
micro-USB connector on the side of
the device.
Note: To synchronize media files,
such as music and video files, you
must use a USB cable, not a Bluetooth
connection.
3. Connect the other end of the USB
cable to your computer.
4. If the USB Connection Mode page
appears, tap ActiveSync > OK.
ActiveSync synchronizes your
device.
1. Enable Bluetooth on your computer.
2. Connect your nüvifone with your
computer using Bluetooth. See
Note: To synchronize media files,
such as music and video files, you
must use a USB cable, not a Bluetooth
connection.
3. On the nüvifone, press the
key.
4. Tap ActiveSync > Menu >
Connect via Bluetooth.
5. When connected, tap Sync to
synchronize data.
84
nüvifone M10 Owner’s Manual
Synchronize Your nüvifone
Mass Storage Mode
Enable the USB
Connection Mode Page
Notice
The USB Connection Mode page
allows you to select a USB connection
mode when you connect your device to
your computer using a USB cable.
If you are not sure about the purpose
of a file, do Not delete the file. Your
nüvifone memory contains important
system files that should Not be
deleted. Be especially cautious of files
located in folders entitled “Garmin” or
“System.”
1. Press the
key.
2. Tap Settings > Connections >
USB Setting.
You can use mass storage mode when
the computer does not have ActiveSync
installed.
3. Select the Ask When I Connect
Device check box.
4. Connect the micro-USB plug to the
micro-USB connector on the side of
the device.
5. Connect the other end of the USB
cable to your computer. The USB
Connection Mode page appears.
6. Select an option.
7. Tap OK.
nüvifone M10 Owner’s Manual
85
Synchronize Your nüvifone
Synchronize with an
Exchange Server
Synchronize with Your
Windows Live Account
1. Press the
key.
ActiveSync can also synchronize
over a wireless or mobile network
with Microsoft Exchange Server,
which allows you to sync your e-mail
messages. Your mobile phone service
or company must be running Microsoft
Exchange Server with Exchange
ActiveSync. You may need to contact
your network administrator for
2. Tap Windows Live.
3. Tap Sign In.
4. Read and accept the terms of use.
5. Select an option:
•
Enter your Windows Live e-mail
and password, and tap Next.
•
Tap Get a Windows Live ID.
Exchange Server information.
6. Follow the on-screen instructions
to synchronize your Windows Live
account on your nüvifone.
For detailed information about
ActiveSync, see the ActiveSync Help
file.
86
nüvifone M10 Owner’s Manual
Connect with Other Devices
Make Your nüvifone Visible
Other devices with Bluetooth
capabilities can detect your device
and attempt to send information to
it, establish a partnership, or use a
Bluetooth service.
Connect with Other
Devices
About Bluetooth
Bluetooth wireless technology
establishes a wireless connection
between devices, such as a computer
with Bluetooth technology and the
nüvifone. To pair and connect, both
devices must be turned on and be
within 10 meters of each other.
1. Press the
key.
2. Tap Settings > Connections >
Bluetooth.
3. From the slider menu at the top of
the screen, select Mode.
4. Select the Turn on Bluetooth
check box, select the Make this
device visible to other devices
check box, and then tap OK.
With Bluetooth enabled in your device,
you can synchronize, transfer files, and
share services.
If you do not want your nüvifone to be
visible to other devices, clear the Make
this device visible to other devices
check box.
Turn On Bluetooth Technology
1. Press the
key.
2. Tap Settings > Wireless Manager
> Bluetooth.
tIP: When not in use, turn off
Bluetooth to conserve battery power.
nüvifone M10 Owner’s Manual
87
Connect with Other Devices
7. Enter the alphanumeric passkey
of the device you want to connect
to, and tap Next. You can find the
passkey in the documentation that
came with the target device.
Add a Bluetooth Device
The first time you use two devices
together, you must “pair” them by
establishing a relationship using a
PIN/passkey.
8. Enter the display name for this
connection.
1. Enable the Bluetooth component
and Find Me/Discoverable/Visible
mode on the device to which
you are connecting. These
settings might be in a Bluetooth,
a Connections, or a Hands-free
menu.
Note: The Bluetooth passkey for the
nüvifone is 1234.
After the initial pairing, the two
devices can connect automatically each
time you turn them on.
2. On the nüvifone, press the
key.
3. Tap Settings > Connections >
Bluetooth.
4. From the slider menu at the top of
the screen, select Devices.
5. Tap Add new device.
6. Select the device you want to
connect to, and tap Next.
88
nüvifone M10 Owner’s Manual
Connect with Other Devices
Send Files
You can send files to another device
using Bluetooth wireless technology.
Use Internet Sharing
Use Internet Sharing to allow your
computer to use the nüvifone Internet
connection. Internet Sharing eliminates
the need to have a separate data plan
for Internet on your computer.
1. Pair and connect the nüvifone with
the device you want to exchange
files with.
2. Press the
key.
Your phone must have a data
connection. Your regular data transfer
charges apply.
3. Tap File Explorer.
4. Select the file, and tap Menu >
Beam File. A list of Bluetooth
devices appears.
1. Connect your nüvifone to your
computer using the USB cable.
5. Select a device in the list. The file is
sent.
2
Press the
key.
3. Tap Internet Sharing.
4. Tap Connect.
Receive Files
To be able to receive files, enable
Bluetooth technology and make the
device visible.
5. Use the Internet on your computer.
nüvifone M10 Owner’s Manual
89
Connect with Other Devices
Automatically Turn
Manage Wireless
Connections
Connections On and Off
1. Press the
key.
1. Press the
key.
2. Tap Settings > Wireless Manager
> Settings > Auto Switch
Settings.
2. Tap Settings > Wireless Manager.
Wireless Manager shows the
connection status of your device.
3. Tap the check boxes to
automatically turn on and off the
phone, Wi-Fi, and Bluetooth.
3. Tap an option to enable or disable it.
The icon is yellow when enabled.
Change Connection Settings
4. Enter the days and the times.
1. Press the
key.
5. Tap Done.
2. Tap Settings > Wireless Manager
> Settings.
3. Select an option to adjust those
settings.
90
nüvifone M10 Owner’s Manual
Connect with Other Devices
Set Up a Wi-Fi Connection Exchange Files Using FTP
1. Press the
key.
You can exchange files between two
Bluetooth devices by enabling the file
transfer server and/or client.
2. Tap Settings > Wireless Manager
> Wi-Fi.
3. Move to a Wi-Fi hot spot.
Configure the File Transfer
Services
Enable Wi-Fi Sharing
1. Press the
key.
With Wi-Fi Sharing on, you can share
your network connection with others,
making your device a Wi-Fi router.
2. Tap Settings > Connections >
Bluetooth.
3. From the slider menu at the top of
1. Connect the nüvifone to the other
device.
the screen, select FTP.
4. Change the root directory, if
necessary. The remote client is not
able to view files outside of this
directory.
2. Move to a Wi-Fi hot spot.
3. On the nüvifone, press the
key.
4. Tap Settings > Wireless Manager
> Wi-Fi Sharing > OK > Connect.
The other device, such as your
laptop, can now use your Wi-Fi
connection.
5. Select the Use server
authorization check box, if
necessary.
6. Tap OK.
nüvifone M10 Owner’s Manual
91
Customize Your nüvifone
Keep the Backlight on When
Navigating
Customize Your
nüvifone
1. Press the
key.
2. Tap Settings > Navigation >
Adjust the Screen
Settings
Backlight Override.
3. Select the On When Navigating
check box.
Adjust the Brightness
1. Press the
key.
Align the Screen
2. Tap Settings > System >
Align (calibrate) the screen to ensure
that the item you tap on the screen is
selected.
Brightness.
3. Adjust the brightness for when the
device is running on battery power
and on external power.
1. Press the
key.
2. Tap Settings > System > Screen.
Adjust the Backlight Timeout
3. From the slider menu at the top of
1. Press the
key.
the screen, select Alignment.
2. Tap Settings > System >
4. Tap Align Screen, and follow the
Backlight.
on-screen instructions.
3. Adjust the backlight for when the
device is running on battery power
and on external power.
92
nüvifone M10 Owner’s Manual
Customize Your nüvifone
Adjust the Color Mode
Customize the Home
Screen
1. Press the
key.
2. Tap Settings > Navigation > Color
Change the Home Screen
Theme
Mode.
3. Select Day (light background),
1. Press the
key.
Night (dark background), or Auto.
2. Tap Settings > Appearance >
Theme.
Access the System
Volume
You can change the sound levels for
customized profiles, ring tones, ring
types, system events, notifications,
screen taps, and hardware buttons.
3. Select a theme for the Home
screen.
Change the Idle Screen Image
1. Press the
key.
2. Tap Settings > Appearance > Idle
Screen Image.
1. Press the
key.
3. Tap Picture.
2. Tap Settings > Sound.
4. Use the arrows to select a picture
for the wallpaper.
Rearrange the Start Menu
1. Press the
key.
2. Touch and drag an icon.
3. Drag the icon and drop it in the new
location.
nüvifone M10 Owner’s Manual
93
Customize Your nüvifone
Note: If you select Auto mode, your
device automatically changes the
profile to Normal or Meeting mode
according to the schedule set in your
Outlook calendar.
Edit the Home Screen
Shortcuts
You can include up to 45 shortcuts on
the Home screen.
1. Touch and drag any icon in the
middle section of the Home screen
for two seconds.
Set the Ring Tone
1. Press the
key.
2. Drag an icon to a new location or to
the trash can.
2. Tap Settings > Sound > Ring
Tone.
3. To add an icon, tap
. Select an
3. Select a ring tone.
application, and tap Add.
4. Tap Play to play the selected ring
4. Tap
to save your changes.
tone.
To restore the Home screen to the
Set the Ring Type
original layout, tap
.
1. Press the
key.
2. Tap Settings > Sound > Ring
Customize the Phone
Settings
Type.
3. Tap a ring type, such as Vibrate
Change the Profile
and Ring.
1. Press the
key.
2. Tap Settings > Sound > Profile.
3. Tap a profile to use, such as
Normal and Silent.
94
nüvifone M10 Owner’s Manual
Customize Your nüvifone
5. Select the notification type.
Change the Advanced Sound
Settings
6. Tap OK.
1. Press the
key.
Set Vibrations for Screen Taps
2. Tap Settings > Sound >
1. Press the
key.
Advanced.
2. Tap Settings > Sound >
3. From the slider menu at the top of
Advanced.
the screen, select Sounds.
3. From the slider menu at the top of
4. Select the events for which you
want to enable sounds.
the screen, select Vibrations.
4. Select the Screen taps check box.
5. Select a vibration type.
6. Tap OK.
5. Tap OK.
Change Notifications
You can assign sounds and notification
messages to certain events, such as
missed calls and reminders.
Automatically Answer Phone
Calls
Answer calls automatically when a
headset is attached.
1. Press the
key.
2. Tap Settings > Sound >
1. Press the
key.
Advanced.
2. Tap Settings > Personal > Phone.
3. From the slider menu at the top of
the screen, select Notifications.
3. From the slider menu at the top of
the screen, select Auto Answer.
4. Select an event for which you want
to assign a notification.
4. Select the check box to enable the
auto answer function.
nüvifone M10 Owner’s Manual
95
Customize Your nüvifone
5. Select how long the device will wait
before answering the call.
3. Tap the drop-down box, select a
region, and tap OK.
6. Tap OK.
TIP: To further customize the units
of measure, from the slider menu
at the top of the screen, select an
item, and make the adjustments.
Activate Connection Alert
1. Press the
key.
2. Tap Settings > Personal > Phone.
4. Restart the nüvifone.
3. From the slider menu at the top of
Change the Navigation Units of
Measure
the screen, select Call Setting.
4. Select an alert indication when the
call is answered.
1. Press the
key.
2. Tap Settings > Navigation >
General.
Adjust Your Regional
Settings
Your units of measure are determined
by the region you select.
3. Select units of measure for distance
and speed, direction, elevation, and
temperature.
Select a Region
1. Press the
key.
2. Tap Settings > System > Regional
Settings.
96
nüvifone M10 Owner’s Manual
Customize Your nüvifone
Lock the Phone with a
Password
Change the Power
Settings
1. Press the
key.
1. Press the
key.
2. Tap Settings > Personal > Lock.
2. Tap Settings > System > Power.
3. Select the check box next to
Prompt if phone unused for, and
select the length of time.
3. Tap Advanced.
4. Configure how the nüvifone will
automatically turn off when running
on battery power and external
power.
4. Select a Password Type.
5. Enter the password and enter it
again to confirm.
6. If necessary, tap Hint and enter a
hint.
7. Tap OK to save the changes.
nüvifone M10 Owner’s Manual
97
Customize Your nüvifone
Manual Configuration
Configure Your Phone
Network Profile
If the network settings for your phone
service provider are not detected when
you install the SIM card, you can select
the network.
1. Press the
key.
2. Tap Settings > Connections >
Network Setting.
3. Select your country.
4. Select your mobile phone service
provider.
GPRS, WAP, and MMS settings
are also configured by the Network
Setting.
5. Tap Done.
Switch Between GSM and 3G
Networks
Choose the right network type for your
SIM card.
Automatic Configuration
1. Press the
key.
2. Tap Settings > Connections >
1. Press the
key.
Network Setting.
2. Tap Settings > Connections >
3. Tap Auto Detect to detect the
mobile phone service provider
according to your SIM card.
GSM/3G Networks.
3. From the Network box, tap a
network or tap Automatic. 3G
network has priority over GSM
network when Automatic is
selected.
4. Tap Done.
4. Tap OK.
98
nüvifone M10 Owner’s Manual
Customize Your nüvifone
•
Auto Zoom—select Enabled
to have the map automatically
zoom to show the next turn on
the map.
Adjust the Navigation
Settings
Adjust the Map Settings
1. Press the
key.
•
•
Show Speed Limit—select Yes
to display the speed limit as you
travel on major roadways.
2. Tap Settings > Navigation > Map.
3. Tap a setting to adjust it.
Vehicle—select an icon used
to display your position on the
map.
•
Map Detail—adjust the amount
of detail shown on the map.
Showing more detail may cause
the map to redraw slower.
Change the Routing Settings
1. Press the
key.
•
Orientation—select 3
Dimensional to display the map
in 3 dimensions (3D) with your
direction of travel at the top;
Track Up to display the map in
two dimensions (2D) with your
direction of travel at the top; or
North Up to display the map in
2D with North at the top.
2. Tap Settings > Navigation >
Routing.
3. Tap a setting to adjust it.
•
Calculate Routes for—select
your vehicle type to optimize
routes.
•
Show Location—show your
location on the nearest road or
at your GPS location.
nüvifone M10 Owner’s Manual
99
Customize Your nüvifone
•
•
•
•
Off–Route Recalculation—
select how the nüvifone notifies
you when you are off your route.
Adjust the Proximity Points
Settings
1. Press the
key.
Route Preference—select a
preference for calculating your
route.
2. Tap Settings > Navigation >
Proximity Points.
3. Tap a setting to adjust it.
Turn Preview—select Enabled
to show a brief preview of
upcoming turns.
•
•
•
Custom POI Sets—turn on and
off the custom POI (points of
interest) sets you have loaded in
the nüvifone.
Avoidance Setup—select the
types of roads or areas you want
Safety Cameras—turn on
and off the Safety Camera
databases you have loaded in
the nüvifone.
Change the Audio Settings
1. Press the
key.
Audio Notification—select how
you want to be audibly notified
when you approach a custom
POI or a safety camera location.
2. Tap Settings > Navigation >
Audio.
3. Tap a setting to adjust it.
•
Voice—select a voice for the
voice prompts.
•
Voice Prompt—turn the vocal
navigation prompts on and off.
100
nüvifone M10 Owner’s Manual
Customize Your nüvifone
Change the Location Format
and Map Datum
Change Connected Services
Settings
1. Press the
key.
1. Press the
key.
2. Tap> Settings > Navigation >
2. Tap Settings > Navigation >
General.
Connected Services.
3. Tap a setting to adjust it.
3. Tap a setting to adjust it.
•
Location Format—select a
format for the coordinates that
matches your paper map. Select
User UTM Grid to enter the
coordinate information.
•
•
•
Connected Services Access—
select how to connect to access
Connected Services.
Location Updates—select to
send Ciao! location updates
manually or automatically.
•
Datum—select a map datum
that matches your paper map.
Connected Services
Feedback—enable to
periodically send anonymous
location information from your
phone. Your phone must have
a data connection. Your regular
data transfer charges apply.
nüvifone M10 Owner’s Manual
101
Customize Your nüvifone
Turn Off GPS
1. Press the
Change the GPS Settings
key.
1. Press the
key.
2. Tap Settings > Navigation > GPS.
2. Tap Settings > Navigation > GPS.
3. Tap GPS Status.
3. Tap a setting to adjust it.
4. Tap
> Disable GPS.
•
Auto Update—select how the
nüvifone automatically updates
the GPS information.
Set Your Location
When you activate the GPS for the first
time, or if you have traveled more than
600 miles with the GPS receiver turned
off, the GPS must initialize. To shorten
the time it takes to acquire satellites,
set your location on the map.
•
Update When Sync—select
whether the nüvifone
automatically updates the GPS
information when you sync the
nüvifone to your computer.
•
•
GPS Data Update—view the
information for the last time the
GPS data was updated. Tap
Update to update the GPS data
now.
1. Press the
key.
2. Tap Settings > Navigation > GPS.
3. Tap GPS Status.
4. Tap
> New Location.
GPS Status—view information
about the GPS satellites your
device is receiving and their
signal strength.
5. Tap a point on the map, and tap
OK.
102
nüvifone M10 Owner’s Manual
Customize Your nüvifone
Turn Safe Mode On and Off
View Device Information
1. Press the
key.
View Your Map Sets
2. Tap Settings > Navigation >
Your phone includes built-in map
data. You can also purchase additional
map data from your Garmin or ASUS
dealer.
General > Safe Mode.
3. Tap Enabled to turn on safe mode.
When your vehicle is moving, safe
mode disables all functions that require
significant operator attention and could
become a distraction while driving.
1. Press the
key.
2. Tap Tools > Manage My Data >
Map Sets.
3. Tap
> MapSource.
Remove Programs
4. To disable a map, clear the check
box next to the map.
1. Press the
key.
2. Tap Settings > System > Remove
Programs.
View Copyrights and EULAs
View copyright information and end-
user license agreements.
3. Tap a program, and tap Remove.
1. Press the
key.
2. Tap Settings > About.
nüvifone M10 Owner’s Manual
103
Customize Your nüvifone
View Navigation Information
View the navigation software version
and the software unit ID.
Restore the Default
Settings
Notice
1. Press the
key.
Items that you have saved on your
device (such as Favorites) are erased.
Files saved in My Storage and
map data are not erased. Deleted
information cannot be recovered.
2. Tap Settings > Navigation >
About.
View System Information
View Microsoft system information.
1. Press the
key.
This process restores all settings to
factory defaults and deletes all user-
entered information.
2. Tap Settings > System > System
Information.
3. Use the slider menu to view the
device information and version.
1. Press the
key.
2. Tap Settings > System > Default
Settings.
View Map Version
1. Press the
key.
3. Enter 1234, and then tap OK.
2. Tap Tools > Manage My Data >
All original settings are restored. Any
items that you have saved are erased.
Map Sets.
3. Tap a map to view the version.
104
nüvifone M10 Owner’s Manual
Appendix
Maximize the Battery Life
Appendix
•
Press the
key, and tap Settings
> System > Backlight to turn down
the backlight.
Reset the nüvifone
If the nüvifone stops functioning, turn
off the nüvifone, and then turn on the
nüvifone.
•
Do not leave your nüvifone in
direct sunlight. Avoid prolonged
exposure to excessive heat.
If this does not help, remove the
battery cover. Using the stylus, press
nüvifone should restart and operate
normally.
Replace the Battery
WARNING
Only use the correct battery type:
HiTech rechargeable, user-replaceable,
SBP-23 lithium-ion battery. Using an
incorrect battery may present a risk of
explosion.
Battery Information
The
battery icon in the status bar
indicates the status of the internal
battery. To increase the accuracy of
the battery gauge, fully discharge the
battery and then fully charge it. Do not
unplug the nüvifone until it is totally
charged.
Do not use a sharp object to remove the
battery. A sharp object may puncture
the battery which may present a risk
of fire, chemical burn, electrolyte leak,
and/or injury.
For more information on purchasing a
replacement battery, go to www
nüvifone M10 Owner’s Manual
105
Appendix
1. Use a coin to push down the sliver
tip, and turn the coin counter-
clockwise, one-quarter turn.
tIP: To avoid losing your customized
settings, replace the battery within
five minutes of removing it from your
device.
2. Remove the end piece, the silver
tip, and the fuse.
Contact your local waste disposal
department for information on properly
disposing of the battery and the device.
3. Install a 1 A fast blow fuse of the
same size.
4. Ensure that the silver tip is located
in the end piece. Using a coin,
replace the end piece.
Change the Fuse in the
Vehicle Power Cable
Notice
When replacing the fuse, do not lose
any of the small pieces and make
sure they are put back in the proper
position. The vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge in your
vehicle, you may need to replace the
fuse located at the tip of the vehicle
adapter.
106
nüvifone M10 Owner’s Manual
Appendix
Mount on Your Dashboard Remove the nüvifone,
A mounting disk is included in some
nüvifone packages. Use the mounting
disk to mount your device to the
dashboard and to comply with certain
state and local regulations. Never
mount the device in a location that
obstructs the driver’s view of the road.
Cradle, and Mount
Remove the nüvifone from the
Cradle
1. Press up on the tab on the top of
the cradle.
2. Tilt the nüvifone forward.
Remove the Cradle from the
Mount
Notice
1. Turn the cradle to the right or left.
The permanent mounting adhesive is
extremely difficult to remove after it is
installed.
2. Apply pressure until the socket on
the cradle releases the ball on the
mount.
1. Clean and dry the dashboard where
you are placing the disk.
Remove the Suction Cup
Mount from the Windshield
1. Flip the lever on the suction cup
mount toward you.
2. Remove the backing from the
adhesive on the bottom of the disk.
3. Place the disk on the dashboard.
2. Pull the tab on the suction cup
toward you.
4. Remove the clear plastic cover from
the top of the disk.
5. Place the suction cup mount on
top of the disk. Flip the lever down
(toward the disk).
nüvifone M10 Owner’s Manual
107
Appendix
•
To help avoid theft, remove the
device and mount from sight when
not in use. Remove the residue on
the windshield left by the suction
cup.
Care for Your Device
•
•
•
Avoid dropping your device and
operating it in high-shock and high-
vibration environments.
Do not expose the device to water.
Contact with water can cause this
device to malfunction.
Specifications
Physical size (W × H × D): 4.57 × 2.28 ×
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it
can cause permanent damage.
0.56 in. (116 × 58 × 14.3 mm)
Weight: 4.87 oz. (138 g)
Display: 3.5 in. diagonal, 800 × 480 pixels;
WVGA display with touchscreen
Case: Not waterproof (IP51)
•
Never use a hard or sharp object to
operate the touchscreen, or damage
may result. Although a stylus can
be used to operate the touchscreen,
never attempt this while operating
a vehicle.
operating temperature Range: from 5°F
to 104°F (from -15°C to 40°C)
Storing temperature Range: from -4°F to
158°F (from -20°C to 70°C)
108
nüvifone M10 Owner’s Manual
Appendix
AC Charger operating temperature
Range: from 32°F to 122°F (from
0°C to 50°C)
GPS receiver: High-sensitivity
Acquisition times*:
Warm: <1 sec.
Power/PC Connector: micro-USB
Cold: <38 sec.
Factory Reset: <45 sec.
Headphone Connector: 3.5 mm
*Average acquisition times for a
stationary receiver with a clear view
of the sky.
Battery type: HiTech rechargeable,
user-replaceable, SBP-23 lithium-ion
battery (1500 mA)
Frequency Band: HSDPA 7.2Mbps
UMTS 900/2100, EDGE/GPRS/GSM
850/900/1800/1900, Class 10
Standby time: 300 to 600 hours*
talk time: 4 to 8 hours*
* Depending on network environment and
phone usage.
other connectivity: Bluetooth 2.0 + EDR;
WLAN; micro-USB 2.0
Charge time: Approximately 4 hours
oS: Microsoft Windows Mobile 6.5.3
Power input: DC vehicle power using
vehicle power cable, AC charger
using USB cable, AC power cable
(optional)
Professional
Camera/Photos: 5 MP camera with EDOF
Data storage: up to 2.5 GB internal
memory; up to 16 GB using a
microSD card
Computer interface: plug-and-play USB
mass storage, ActiveSync
nüvifone M10 Owner’s Manual
109
Important Safety and Product Information
any airbag. (See diagram.)
Important Safety and
Product Information
For updates to the safety and product
information, see the most recent
owner’s manual at
◦
◦
◦
Do not place unsecured on the
vehicle dashboard.
Do not mount where the driver’s
field of vision is blocked.
WARNING
Failure to avoid the following
Do not mount in front of an
airbag field of deployment.
potentially hazardous situations could
result in an accident or collision
resulting in death or serious injury.
•
•
The windshield mount may not
stay attached to the windshield in
all circumstances. Do not place
the mount where it will become
a distraction if the mount should
become detached. Keep your
Installation and Operation
Warnings
•
When installing the device in a
vehicle, place the device securely
so it does not obstruct the driver’s
view of the road or interfere with
vehicle operating controls, such as
the steering wheel, the foot pedals,
or the transmission levers. Do not
place the device in front of or above
windshield clean to help ensure that
the mount stays on the windshield.
Always use your best judgement,
and operate the vehicle in a safe
manner. Do not become distracted
by the device while driving,
110
nüvifone M10 Owner’s Manual
Important Safety and Product Information
and always be fully aware of all
driving conditions. Minimize the
amount of time spent viewing the
device screen while driving, and
use voice prompts when possible.
signs and road conditions.
•
The device is designed to provide
route suggestions. It is not a
replacement for driver attentiveness
and good judgement. Do not follow
route suggestions if they suggest
an unsafe or illegal maneuver
or would place the vehicle in an
unsafe situation.
•
Do not send text messages, input
destinations, change settings, or
access any functions requiring
prolonged use of the device
controls while driving. Pull over
in a safe and legal manner before
attempting such operations.
Battery Warnings
If these guidelines are not followed,
the internal lithium-ion battery may
experience a shortened life span or may
present a risk of damage to the GPS
device, fire, chemical burn, electrolyte
leak, and/or injury.
Navigation Warnings
•
When navigating, carefully
compare information displayed
on the device to all available
navigation sources, including
road signs, road closures, road
conditions, traffic congestion,
weather conditions, and other
factors that may affect safety while
driving. For safety, always resolve
any discrepancies before continuing
navigation, and defer to posted road
•
Do not leave the device exposed
to a heat source or in a high
temperature location, such as in the
sun in an unattended vehicle. To
prevent damage, remove the device
from the vehicle or store it out of
direct sunlight, such as in the glove
nüvifone M10 Owner’s Manual
111
Important Safety and Product Information
box.
children.
•
•
Do not puncture or incinerate the
device or battery.
•
•
Do not disassemble, puncture, or
damage the battery.
When storing the device for an
extended time, store within the
following temperature range: from
-4°F to 158°F (from -20°C to
70°C).
If using an AC charger or an
external battery charger, only use
the accessory approved for your
product.
•
•
Only replace the battery with the
correct replacement battery. Using
another battery presents a risk
of fire or explosion. To purchase
a replacement battery, see your
Garmin or ASUS dealer or the
Garmin-Asus Web site.
•
•
Do not operate the device outside
of the following temperature range:
from 5°F to 104°F (from -15°C to
40°C).
Contact your local waste disposal
department to dispose of the
device/battery in accordance
with applicable local laws and
regulations.
Do not remove or attempt to
remove the non-user-replaceable
battery.
Additional User-replaceable Battery
Warnings:
Map Data Information
Garmin uses a combination of
governmental and private data sources.
Virtually all data sources contain some
inaccurate or incomplete data. In some
countries, complete and accurate map
•
Do not use a sharp object to remove
the battery.
•
Keep the battery away from
112
nüvifone M10 Owner’s Manual
Important Safety and Product Information
information is either not available or is
prohibitively expensive.
Avoid Seizures, Blackouts, and
Eyestrain
A very small percentage of people
can experience seizures or blackouts
caused by light flashes or patterns, such
as while watching videos or playing
games. If you have experienced, or
have a family history of, seizures or
blackouts, consult a physician before
playing games or watching videos on
your device.
Avoid Hearing Damage
You can permanently damage your
ears and lose hearing if you listen to
the device, earbuds, or headphones at
high volume. The volume is typically
too loud if you cannot hear people
speaking around you. Limit the amount
of time you listen at high volume. If
you experience ringing in your ears or
muffled speech, stop listening and have
your hearing checked.
Avoid prolonged use of the device.
Take frequent breaks from using the
device. Hold the device away from
your eyes. Use the device in a well-lit
room. If you experience convulsions,
eye or muscle twitching, loss of
awareness, involuntary movement, or
disorientation, stop using the device
and consult a physician.
Avoid Repetitive Motion
You may experience occasional
discomfort in your hands, arms,
shoulders, neck, or other parts of
your body if you perform repetitive
activities, such as typing, on the mobile
device. Take frequent breaks. If you
have discomfort while or after using
the device, stop using it and see a
physician.
nüvifone M10 Owner’s Manual
113
Important Safety and Product Information
For other medical devices, consult with
your physician or the manufacturer to
determine if your mobile device may
interfere with the medical device, and
to determine any precautions that you
can take to avoid interference.
Pacemakers and Other Medical
Devices
Studies have shown that there may
be a potential interaction between
mobile devices and normal pacemaker
operation. The pacemaker industry
recommends that people with
pacemakers follow these guidelines to
minimize any risk of interference with
pacemaker operation:
Radio Frequency Exposure
This device is a mobile transmitter
and receiver that uses its antenna to
send and receive low levels of radio
frequency (RF) energy for voice and
data communications. The antenna(s)
used for this transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
The device emits RF energy below
the published limits when operating in
its maximum output power mode and
when used with Garmin authorized
accessories. To comply with ICNIRP
RF exposure compliance requirements,
the device should be used in its
•
Always maintain a distance of
6 inches (15 cm) between the
pacemaker and any mobile device
that is turned on.
•
•
•
Store the device on the opposite
side of the pacemaker. Do not carry
the device in a breast pocket.
Use the ear furthest from the
pacemaker in order to minimize any
potential for interference.
If you think that interference may
be occurring, turn off the device
immediately.
automobile mount, as a body-worn, or
as a handheld device only. For body
114
nüvifone M10 Owner’s Manual
Important Safety and Product Information
worn operation, this phone has been
tested and meets the FCC RF exposure
guidelines for use with an accessory
that contains no metal and the positions
the handset a minimum of 1.5 cm from
the body. Use of other accessories may
not ensure compliance with FCC RF
exposure guidelines. If you do not use
a body-worn accessory and are not
holding the phone at the ear, position
the handset a minimum of 1.5 cm from
your body when the phone is switched
on. The device should not be used in
other configurations.
Band
Position SAR 10g
(W/kg)
GSM 850
Head
0.94
Body (1.5 1.33
cm gap)
GSM 900
GSM 1800
GSM 1900
Head
Head
Head
0.424
0.549
0.512
Body (1.5 0.445
cm gap)
WCDMA
Band I
Head
0.796
0.415
0.044
WCDMA Band Head
VIII
This device has been tested and is in
compliance with international Specific
Absorption Rate (SAR) Exposure
limits. The actual measured values are
as follows:
WLAN
Head
Body (1.5 0.069
cm gap)
nüvifone M10 Owner’s Manual
115
Important Safety and Product Information
Declaration of Conformity
Hereby, Garmin, declares that this
product is in compliance with the
essential requirements and other
relevant provisions of Directive
1999/5/EC. To view the full
Declaration of Conformity, go to
FCC Compliance
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Equipment Use
This device is for use worldwide,
including the following countries:
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
part 15 of the FCC rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and
may cause harmful interference to
radio communications if not installed
and used in accordance with the
instructions. However, there is no
guarantee that interference will not
occur in a particular installation. If
AT
BE
BG
CH
CY
CZ
DE
DK
EE
ES
FI
IS
IT
NO
PL
PT
RO
SE
SI
LI
FR
GB
GR
HU
IE
LT
LU
LV
MT
NL
SK
TR
116
nüvifone M10 Owner’s Manual
Important Safety and Product Information
this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one of the following
measures:
your warranty and your authority
to operate this device under Part 15
regulations.
Thomson MPEG Layer-3
Information
Supply of this product does not
convey a license nor imply any right
to distribute content created with
this product in revenue-generating
broadcast systems (terrestrial, satellite,
cable and/or other distribution
channels), streaming applications
(via internet, intranets and/or other
networks), other content distribution
systems (pay-audio or audio-on-
demand applications and the like) or on
physical media (compact discs, digital
versatile discs, semiconductor chips,
hard drives, memory cards and the
like). An independent license for such
use is required. For details, please visit
•
•
•
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and the receiver.
Connect the equipment into an
outlet that is on a different circuit
from the GPS unit.
•
Consult the dealer or an
experienced radio/TV technician
for help.
This product does not contain any
user-serviceable parts. Repairs should
only be made by an authorized service
center. Unauthorized repairs or
modifications could result in permanent
damage to the equipment, and void
nüvifone M10 Owner’s Manual
117
Troubleshoot Issues
Troubleshooting
Issue
Description
Press the
GPS > GPS Status >
key, and then tap Settings > Navigation >
. Verify GPS is enabled.
Device will not
acquire satellite
signals.
Make sure the GPS has enough time to initialize. When the
GPS is turned on for the first time, it may take a few minutes
to initialize.
If you have traveled more than 600 miles with the GPS
receiver turned off, set your location on the map.
Device will not turn
on.
As a safety precaution in high temperature environments,
the device will suspend charging and use battery power.
If the device is mounted in a vehicle, remove the device
from the mount and place it out of direct sunlight.
Device will not
charge.
The call function may have been suspended because of low
battery power. In low battery situations, you might be asked
to turn off the call functions. You can still navigate in these
situations (PND mode).
Cannot place a
phone call.
118
nüvifone M10 Owner’s Manual
Index
calendar 74
call 20
end 22
history 24
Index
Symbols
3GP 69
B
backlight
adjust 92
options 21
camera 67
A
keep on when
navigating 92
timeout 92
battery
charge 10
information 105
remove 105
Bluetooth 87
Ciao! 55–59
invite 56
join 56
register 55
ActiveSync
install 83
USB 84
address 28
alarms 77
appointment
status 57
make 74
connection 101
settings 101
view 74
avoid
BMP 69
connections 90
contacts
edit custom
avoidances 44
C
calculator 80
nüvifone M10 Owner’s Manual
119
Index
add 25
favorites 26
coordinates 34
cradle 11
FTP 91
E
e-mail 54
G
geocache 34
GPS
F
custom POIs
settings 100
Facebook 59
Favorite
contact 26
delete 42
D
default
camera 69
settings 102
locations 32
files
backup 82
restore 82
send 89
file types
music 65
find locations. See search
for locations
delete
all settings and
favorites 104
Favorites 42
message 53
picture 70
video 71
detour 38
H
H264 69
icons 94
layout 94
theme 93
120
nüvifone M10 Owner’s Manual
Index
Microsoft Office
Mobile 81
MMS 50
I
M
icons 17
Internet 60
map
mount
MP4 69
share connection with
computer 89
additional i
contours 33
customize 99
datum 101
moving 32
orientation 99
settings 99
update i
version 104
view 99
zoom 33
MapSource i
messages (SMS/MMS)
delete 53
forward 52
new 50
read 52
J
JPEG 69
N
K
navigation. See route
news 49
articles 62–64
Newstation 62–64
note 80
keyboard 14
L
O
odometer 37
output, audio
micro-USB 7
P
nüvifone M10 Owner’s Manual
121
Index
PDF 80
odometer 37
restore
stop 38
phone 20–24
settings 94–104
picture
RSS 62–64
files 82
S
effects 68
settings 100
save location to
Favorites 32
save your current
screen
align 92
calibrate 92
Home 12
lock 15
orient 14
quality 68
take 67
view 70
PNG 69
PowerPoint 81
profile 94
settings 100
ringer 94
set 94
route
details 36
follow 35
keep backlight on
during 92
plan 42–44
preferences 100
save 38
R
reset 105
rotate 14
search
internet 60
settings 99
simulate 44
M20 105
122
nüvifone M10 Owner’s Manual
Index
address 28
set your current
location 102
SIM card
with an Exchange
Server 86
change the search
area 30
favorites 32
slideshow 70
SMS 50–54
software
update i
sound
T
near a different
location 30
send
e-mail 54
file 89
tasks 77
timer 79
track
edit 45
record 45
save 45
profile 94
speakerphone 21
specifications 108
status bar
icons 17
stylus 14
synchronize
e-mail 54
using Bluetooth
technology 84
traffic 39–40
avoid 40
MMS 50
SMS 50
icon 39
text 50
settings
U
audio 100
units 96
update
phone 94–104
route 99
maps i
software i
nüvifone M10 Owner’s Manual
123
For the latest free software updates
(excluding map data) throughout the life of
July 2010
Part Number 190-01153-00 Rev. C
Printed in China
|