User’s Guide
3
Contents
Connecting Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting Image Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting a Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting External Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting a LAN Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing the Optional Wireless LAN Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Installing the Optional Quick Wireless Connection USB Key . . . . . . . . . . . . . . . 37
Connecting Multiple Projectors (EB-536Wi only) . . . . . . . . . . . . . . . . . . . . . . . . . 38
Introduction
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Quick and Easy Set up, Projection, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting with a USB Cable and Projecting (USB Display) . . . . . . . . . . . . . . . . 8
Useful Functions for Projecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connect a USB Storage Device and Project Movies or Images (PC Free) . . . . . . . . 8
Flip the Image Horizontally and Project (Flip Horizontal) . . . . . . . . . . . . . . . . . . 8
Various Functions for Excellent Power Saving . . . . . . . . . . . . . . . . . . . . . . . . . 8
Making the Most of the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Enlarge and Project Your Files with the Document Camera . . . . . . . . . . . . . . . . 9
Enhanced Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Taking Full Advantage of a Network Connection . . . . . . . . . . . . . . . . . . . . . . . . . 9
Interactive Features (Easy Interactive Function) (EB-536Wi only) . . . . . . . . . . . . . . 10
Basic Usage
Projecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turning On the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turning Off the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Automatically Detect Input Signals and Change the Projected Image (Source Search)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Switching to the Target Image Using the Remote Control . . . . . . . . . . . . . . . . . . 44
Projecting with USB Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Connecting for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Uninstalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front/Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Replacing the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Remote Control Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Easy Interactive Pen (EB-536Wi only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Replacing the Battery for the Interactive Pen . . . . . . . . . . . . . . . . . . . . . . . . . 20
Replacing the Tip of the Interactive Pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjusting Projected Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Correcting Keystone Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Correcting Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Correcting Automatically (EB-536Wi only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting the Image Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting the Horizontal Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Correcting the Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . . . . . . 53
Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Changing the Aspect Ratio of the Projected Image . . . . . . . . . . . . . . . . . . . . . . . 55
Changing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Preparing the Projector
Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
When Using the Interactive Features (EB-536Wi only) . . . . . . . . . . . . . . . . . . . 24
Contents
4
Changing the Aspect Mode (EB-536Wi/EB-535W/EB-525W only) . . . . . . . . . . . . 55
Changing the Aspect Mode (EB-530/EB-520 only) . . . . . . . . . . . . . . . . . . . . . . 56
Useful Functions
Projection Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Projecting Images Stored on a USB Storage Device (PC Free) . . . . . . . . . . . . . . . . 85
Specifications for Files that Can Be Projected Using PC Free . . . . . . . . . . . . . . . 85
PC Free Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
PC Free Operating Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Projecting the Selected Images or Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Projecting Image Files in a Folder in Sequence (Slideshow) . . . . . . . . . . . . . . . 88
Image File Display Settings and Slideshow Operation Settings . . . . . . . . . . . . . 89
Flipping the Image Horizontally (Flip Horizontal) . . . . . . . . . . . . . . . . . . . . . . . . 90
Hiding the Image and Sound Temporarily (A/V Mute) . . . . . . . . . . . . . . . . . . . . . 90
Freezing the Image (Freeze) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Pointer Function (Pointer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Enlarging Part of the Image (E-Zoom) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) . . . . . . 93
Saving a User's Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Saving User Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Using the Interactive Features (EB-536Wi only)
Interactive Feature Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Drawing on a Projected Image (Annotation Mode) . . . . . . . . . . . . . . . . . . . . . . . 60
Using the Projected Screen as a Whiteboard (Whiteboard Mode) . . . . . . . . . . . . . 61
Controlling a Computer from the Projected Screen (Computer Interactive Mode) . . 62
Computer Interactive Mode System Requirements . . . . . . . . . . . . . . . . . . . . . 62
Using Computer Interactive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Easy Interactive Driver System Requirements (OS X only) . . . . . . . . . . . . . . . . . 65
Installing Easy Interactive Driver on OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Using the Interactive Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Pen Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Calibrating Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Calibrating Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Adjusting the Pen Operation Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Security Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Managing Users (Password Protection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Kinds of Password Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Setting Password Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Entering the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Restricting Operation (Control Panel Lock) . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Anti-Theft Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Installing the Wire Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Interacting with the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Switching the Interactive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Annotation Mode and Whiteboard Mode Toolbars . . . . . . . . . . . . . . . . . . . . . . . 75
Selecting Line Width and Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Selecting Whiteboard Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Projector Control Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Selecting Network Device Display from the Projector Control Toolbar . . . . . . . . 78
Monitoring and Controlling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Using the Interactive Features over a Network . . . . . . . . . . . . . . . 80
About EasyMP Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Message Broadcasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Changing Settings Using a Web Browser (Web Control) . . . . . . . . . . . . . . . . . . . 102
Projector Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Displaying the Web Control Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Displaying the Web Remote screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Using the Mail Notification Function to Report Problems . . . . . . . . . . . . . . . . . . 104
Reading Error Notification Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Management Using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Precautions When Connecting to a Projector on a Different Subnet . . . . . . . . . . . 80
Windows Pen Input and Ink Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Enabling Windows Pen Input and Ink Features . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Using Windows Pen Input and Ink Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Contents
5
ESC/VP21 Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Reflecting Saved Settings to Other Projectors . . . . . . . . . . . . . . . . . . . . . . . . 137
Setup by Connecting the Computer and Projector with a USB Cable . . . . . . . . . . 138
Saving Settings to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Reflecting Saved Settings to Other Projectors . . . . . . . . . . . . . . . . . . . . . . . . 139
When Setup Fails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Command list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Cable Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
About PJLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
About Crestron RoomView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
®
Operating a Projector from Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . 108
Troubleshooting
Configuration Menu
Using the Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Problem Solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Reading the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
When the Indicators Provide No Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Problems Relating to Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
No Images Appear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Moving Images are Not Displayed (Only the Moving Image Portion Turns Black) 149
Projection Stops Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
The Message Not supported is Displayed . . . . . . . . . . . . . . . . . . . . . . . . . . 149
The Message No Signal is Displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Images are Fuzzy, Out of Focus, or Distorted . . . . . . . . . . . . . . . . . . . . . . . . 150
Interference or Distortion Appear in Images . . . . . . . . . . . . . . . . . . . . . . . . . 151
The Mouse Cursor Flickers (Only when Projecting USB Display) . . . . . . . . . . . . 152
The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable . . . . . . . 152
Image Colors are Not Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Images Appear Dark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Problems when Projection Starts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
The Projector Does Not Turn On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Other Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
No Sound can be Heard or the Sound is Faint . . . . . . . . . . . . . . . . . . . . . . . . 154
No Sound can be Heard from the Microphone . . . . . . . . . . . . . . . . . . . . . . . 155
There is Noise in the Audio (Only when Projecting USB Display) . . . . . . . . . . . 155
The Remote Control Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
I Want to Change the Language for Messages and Menus . . . . . . . . . . . . . . . 156
Mail is Not Received even if a Problem Occurs in the Projector . . . . . . . . . . . . 156
Cannot Change Settings Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . 157
Problems with the Interactive Features (EB-536Wi only) . . . . . . . . . . . . . . . . . . . 157
Cannot Draw on the Projected Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Configuration Menu Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Signal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Extended Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Easy Interactive Function Setting Items (EB-536Wi only) . . . . . . . . . . . . . . . . 123
Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Notes on Operating the Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Soft Keyboard Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Wireless LAN Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Search Access Point screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Wired LAN Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Mail Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Others Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
ECO Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Info Menu (Display Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Reset Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Performing Batch Setup for Multiple Projectors . . . . . . . . . . . . . 136
Setting Up Using a USB Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Saving Settings to a USB Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Contents
6
Cannot Operate a Computer from the Projected Screen After Connecting to the
Supported Monitor Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
The Message An error occurred in the Easy Interactive Function. is Displayed . . 158
Computer's Mouse Does Not Work Correctly . . . . . . . . . . . . . . . . . . . . . . . . 158
The Interactive Pen Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Supported Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Computer Signals (analog RGB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Component Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Composite Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Input Signal from the HDMI Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
The Response Time for the Interactive Pen is Slow (Only when Projecting USB
Display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
The Dot Moves Automatically or Does Not Move to the Next Position During
Manual Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Projector General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
About Event ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Maintenance
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Wireless Telegraphy Act Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
General Notice: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Cleaning the Projector's Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Cleaning the Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Cleaning the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Lamp Replacement Period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
How to Replace the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Resetting the Lamp Hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Replacing the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Air Filter Replacement Period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
How to Replace the Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Appendix
Optional Accessories and Consumables . . . . . . . . . . . . . . . . . . . . 172
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . 173
Projection Distance (for EB-536Wi/EB-535W/EB-525W) . . . . . . . . . . . . . . . . . . . 173
Projection Distance (For EB-530/EB-520) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Introduction
This chapter explains the projector's features and the part names.
8
Projector Features
Flip the Image Horizontally and Project (Flip Horizontal)
Quick and Easy Set up, Projection, and Storage
You can temporarily flip the image horizontally and project. This is useful
when projecting images for dance lessons and so on.
• Turn the projector on and off by simply plugging in or unplugging.
• Projection only starts when a computer image is input (Auto Power
On).
s
"Flipping the Image Horizontally (Flip Horizontal)" p.90
• Project onto large screens from a short distance.
• Make easy height adjustments with one lever.
• No cool down delay makes it easy to put away.
Various Functions for Excellent Power Saving
• Various functions to prevent wasting electricity
The projector comes with a number of built-in functions to save power
such as dimming the projected image, an auto power off timer, and
adjusting power consumption while the projector is standing by.
Connecting with a USB Cable and Projecting (USB Display)
By simply connecting a USB cable, you can
project images from a computer's screen
without a Computer cable.
s
"ECO Menu" p.133
• Function for displaying the power-saving status on the projected screen
When ECO Display is set to On from the Configuration menu, leaf icons
s "Projecting with USB Display" p.45
(
) that indicate the power-saving status are displayed at the bottom-
left of the projected screen when the lamp brightness has switched to low
brightness.
s
ECO - ECO Display p.133
Useful Functions for Projecting Images
Making the Most of the Remote Control
You can use the remote control to perform operations such as enlarging
part of the image. You can also use the remote control as a pointer during
presentations or as a mouse for the computer.
Connect a USB Storage Device and Project Movies or Images (PC
Free)
You can connect USB storage devices or digital cameras to the projector
and project saved images.
s
s
s
"Pointer Function (Pointer)" p.91
"Enlarging Part of the Image (E-Zoom)" p.92
A wide range of file formats are supported such as movies or images.
"Using the Remote Control to Operate the Mouse Pointer (Wireless
s
"Projecting Images Stored on a USB Storage Device (PC Free)"
Mouse)" p.93
p.85
Projector Features
9
• Sharing the projector over a network
Enlarge and Project Your Files with the Document Camera
By using EasyMP Network Projection, you
can connect the projector to a network and
share it with multiple computers. You can
project images and data from each computer
without having to reconnect cables. You can
also project to multiple projectors from one
computer.
You can project paper documents and objects using the optional Document
Camera.
By connecting to a computer and using the software supplied, you can
make full use of the projector's capabilities.
s
"Optional Accessories" p.172
s EasyMP Network Projection Operation
Guide
Enhanced Security Functions
• Projecting images from multiple computers simultaneously
• Password Protect to restrict and manage users
By using EasyMP Multi PC Projection, up to
four screens from multiple computers
connected to the network, or from
smartphones or tablets with Epson
iProjection installed, can be projected
simultaneously.
By making yourself the host of a meeting, you
can control the projected screens from other
connected computers allowing you to
advance the meeting smoothly.
You can also project the same screen from
remote projectors on the network.
s EasyMP Multi PC Projection Operation
Guide
By setting a Password you can restrict who can use the projector.
s
"Managing Users (Password Protection)" p.98
• Control Panel Lock to restrict button operation on the control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on.
s
"Restricting Operation (Control Panel Lock)" p.100
• Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft security
devices.
• Security slot
• Security cable installation point
s "Anti-Theft Lock" p.101
Taking Full Advantage of a Network Connection
You can perform the following operations by using EasyMP Network
Projection and EasyMP Multi PC Projection that can be found on the
EPSON Projector Software CD-ROM.
Projector Features
10
You can perform the following operations by using optional devices and
applications.
Interactive Features (Easy Interactive Function)
(EB-536Wi only)
• Wirelessly projecting your computer's screen
By installing the optional Wireless LAN unit,
you can project a computer screen over a
network.
s "Installing the Optional Wireless LAN
Unit" p.36
• Connecting to a computer with Quick Wireless easily
By simply connecting the optional Quick
Wireless Connection USB Key to a computer,
you can automatically perform network
settings for a wireless LAN connection, and
project the computer's screen (Windows
only).
• Projecting images from portable devices over a network
If Epson iProjection is installed on your smart
phone or tablet device, you can wirelessly
project data from the device. You can
download Epson iProjection for free from the
App Store or from Google play. Any fees
incurred when communicating with the App
Store or Google play are the responsibility of
the customer.
You can perform the following operations with the interactive pen.
• Use the projected screen as a whiteboard
• Draw on content projected from a computer
• Operate a computer from the projected screen
• Operate the projector from the projected screen
• Select devices on the projected screen that have been connected to the
network using the supplied EasyMP Multi PC Projection
• Use the interactive features over a network using the supplied EasyMP
Network Projection or the optional Quick Wireless
s
"Using the Interactive Features (EB-536Wi only)" p.58
11
Part Names and Functions
The illustrations currently used in this guide are for the EB-536Wi.
Name
Function
Press the foot adjust lever to extend and retract the front
adjustable foot.
s "Adjusting the Image Position" p.52
Foot adjust lever
C
D
Front/Top
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
Front adjustable foot
s "Adjusting the Image Position" p.52
Projects images.
Projection lens
E
F
Takes in air to cool the projector internally.
s "Cleaning the Air Filter" p.163
Air intake vent
(Air filter)
s "Replacing the Air Filter" p.169
Corrects horizontal distortion in the projected image.
s "Correcting Manually" p.49
Horizontal keystone
adjuster (EB-536Wi
only)
G
Adjusts the image focus.
s "Correcting the Focus" p.53
Focus ring
H
I
J
Operates the projector.
s "Control Panel" p.15
Control Panel
Lamp cover
Open when replacing the projector's lamp.
s "Replacing the Lamp" p.166
Name
Function
Receives signals from the remote control.
Receives signals from the interactive pen.
s "Using the Interactive Features (EB-536Wi only)"
p.58
Remote receiver
A
B
Easy Interactive Func
tion receiver
(EB-536Wi only)
Part Names and Functions
12
Name
Function
Rear
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
K
Warning
Do not look into the vents. If the lamp explodes,
gases may escape and small fragments of glass may
be scattered which could cause an injury. Contact a
doctor if any fragments of broken glass are inhaled
or get into the eyes or mouth.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent.
Name
Function
Connects the power cord to the projector.
Power inlet
A
• Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.90
• Hold down the button for approximately three seconds
to perform auto pen calibration (EB-536Wi only).
s "Turning On the Projector" p.41
[A/V Mute] button
Lens cover
L
M
For S-video signals from video sources.
S-Video port
RS-232C port
B
C
When controlling the device from a computer, connect it
to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
Install when not using the projector to protect the lens
from being damaged or soiled.
s "ESC/VP21 Commands" p.106
Inputs composite video signals from video sources.
Video port
D
E
Inputs audio from equipment connected to the S-Video
port or the Video port.
Audio-L/R port
Inputs audio from the microphone.
s "Connecting a Microphone" p.32
Mic port
F
G
Outputs analog RGB signals input from the Computer1
port to an external monitor. You cannot output signals
input from other ports or component video signals.
Monitor Out port
Inputs audio from equipment connected to the
Computer1 port.
Audio1 port
H
Part Names and Functions
13
Name
Function
Name
Function
Outputs audio from the currently projected image to an
external speaker.
• Connects a USB storage device or a digital camera, and
projects images using PC Free.
Audio Out port
USB-A port
S
I
J
K
s "Projecting Images Stored on a USB Storage
Device (PC Free)" p.85
Inputs audio from equipment connected to the
Computer2 port.
Audio2 port
• Connects the optional Document Camera.
When installing multiple projectors in the same room and
using the interactive function, connect projectors using
the optional Remote control cable set (ELPKC28). Easy
Interactive Pen operations are stabilized when connected.
s "Connecting Multiple Projectors (EB-536Wi only)"
p.38
SYNC IN/OUT port
(EB-536Wi only)
• Connects the optional Wireless LAN unit.
s "Installing the Optional Wireless LAN Unit"
p.36
• Connects the optional Quick Wireless Connection USB
Key.
s "Installing the Optional Quick Wireless
Connection USB Key" p.37
Outputs audio.
Speaker
L
M
Inputs video signals from HDMI compatible video
HDMI port
This screw secures the wireless LAN unit cover.
Wireless LAN unit
fixing screw
T
equipment and computers. This projector is compatible
with HDCP
g.
s "Connecting Image Sources" p.28
Inputs image signals from a computer and component
video signals from other video sources.
Computer2 port
Computer1 port
Remote receiver
LAN port
N
O
P
Q
R
Receives signals from the remote control.
Connects a LAN cable to connect to a network.
• Connectsthe projector to a computer using a USB cable,
and projects the images on the computer.
s "Projecting with USB Display" p.45
USB-B port
• Connects the projector to a computer using a USB cable
to use the Wireless Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
• When operating the mouse using the Easy Interactive
Pen, connect to the computer with the supplied USB
cable (EB-536Wi only).
s "Controlling a Computer from the Projected
Screen (Computer Interactive Mode)" p.62
Part Names and Functions
Base
14
Name
Function
When attaching to a wall, attach the optional wall mount
fixing plate.
Wall mount plate
fixing points (five
points)
B
C
D
E
s "Optional Accessories" p.172
Pass a commercially available wire lock through here and
lock it in place.
Security cable
installation point
s "Installing the Wire Lock" p.101
When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.
Rear feet
s "Adjusting the Horizontal Tilt" p.52
When setup on a surface such as a desk, extend the foot to
adjust the position of the image.
Front adjustable foot
s "Adjusting the Image Position" p.52
Name
Function
Attach the optional Ceiling mount here when suspending
the projector from a ceiling.
Ceiling mount fixing
points (three points)
A
s "Installing the Projector" p.23
s "Optional Accessories" p.172
Part Names and Functions
Control Panel
15
Name
Function
• Perform keystone correction.
s "H/V-Keystone" p.49
[w][v] buttons
D
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.113
s "Using the Help" p.142
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.142
[Help] button
[Esc] button
E
F
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s "Using the Configuration Menu" p.113
• Adjusts the size of the projection screen. Press the [Tele]
button to reduce the size of the projection screen and
press the [Wide] button to increase the size of the
projection screen.
[Tele]/[Wide] buttons
G
Name
Function
Indicates the projector's status using color, and by being lit
or flashing.
s "Reading the Indicators" p.143
Indicators
A
B
• Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s "H/V-Keystone" p.49
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s "Using the Configuration Menu" p.113
s "Using the Help" p.142
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
[Source Search]
button
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer1 port or Computer2 port, automatically
optimizes the image by adjusting the Tracking, Sync.,
and Position.
[Enter] button
C
[
]
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.113
[Menu] button
H
I
Turns the projector power on or off.
s "Turning On the Projector" p.41
[Power] button
[t]
Part Names and Functions
Remote Control
16
Name
Function
Turns the projector power on or off.
s "Turning On the Projector" p.41
[Power] button
A
B
[t]
Each timeyoupressthebutton, theinputchangesbetween
images from the Computer1 port and the Computer2
port.
[Computer] button
Each time the button is pressed, the image cycles through
the S-Video, Video, and HDMI ports.
[Video] button
C
D
• Enter the Password.
s "Setting Password Protection" p.98
Numeric buttons
• Use this button to enter numbers in Network settings
from the Configuration menu.
If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
[Auto] button
E
F
automatically optimize Tracking, Sync., and Position.
Each time the button is pressed, the aspect mode changes.
[Aspect] button
s "Changing the Aspect Ratio of the Projected Image"
p.55
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection" p.98
[Num] button
[Menu] button
G
H
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.113
Part Names and Functions
17
Name
Function
Name
Function
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
Changes pagesin files such as PowerPointfiles whenusing
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
• When using USB Display
s "Projecting with USB Display" p.45
[Page] buttons
[[][]]
I
L
[
][
][ ][
]
buttons
s "Using the Configuration Menu" p.113
• When projecting using PC Free, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s "Projecting Images Stored on a USB Storage
Device (PC Free)" p.85
• During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
• When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next screen.
Enlarges or reduces the image without changing the
projection size.
s "Enlarging Part of the Image (E-Zoom)" p.92
[E-Zoom] button
[z][x]
M
N
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
[Enter] button
[
J
]
• Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.90
[A/V Mute] button
s "Using the Configuration Menu" p.113
• Acts as a mouse's left button when using the Wireless
• You can change the Projection mode as follows by
pressing the button for about five seconds.
Front W Front/Upside Down
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
Rear W Rear/Upside Down
Select any frequently used item from the available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
[User] button
K
Allows you to attach a commercially available strap to the
remote control.
Strap attachment hole
[Help] button
O
P
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s "Using the Help" p.142
s "Settings Menu" p.119
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.91
[Freeze] button
The following menu items are assigned by default.
Q
R
• For EB-536Wi: Auto Calibration
• For EB-535W/EB-525W/EB-530/EB-520: Power
Consumption
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.53
[Volume] button
[a][b]
Displays the on-screen pointer.
[Pointer] button
S
s "Pointer Function (Pointer)" p.91
Part Names and Functions
18
Replacing the Remote Control Batteries
Name
Function
• Stops the current function.
[Esc] button
T
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
• If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu" p.113
• Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
Attention
Make sure you read the following manual before handling the batteries.
(Only available in EB-536Wi)
Changes between operating the computer or drawing
using the interactive pen.
s "Using the Interactive Features (EB-536Wi only)"
p.58
[Pen Mode] button
[Color Mode] button
U
V
s Safety Instructions
Remove the battery cover.
a
While pushing the battery cover catch, lift the cover up.
Each time the button is pressed, the color mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.53
Not available on this device.
[MHL Menu] button
[LAN] button
W
X
Y
Switches to the image from the network connected device.
Each time the button is pressed, it cycles through the
following images:
[USB] button
• USB Display
• Images from the device connected to the USB-A port
Replace the old battery with a new battery.
b
Switches to the image from the input port where video
signals are being input.
[Source Search]
button
Z
a
Slide the batteries in negative side first.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
Outputs remote control signals.
Remote control light-
emitting area
Part Names and Functions
19
Remote Control Operating Range
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
Replace the battery cover.
c
Press the battery cover until it clicks into place.
Easy Interactive Pen (EB-536Wi only)
There are two types of interactive pens with different colored bottom
sections. You cannot use interactive pens with the same colored bottom
sections at the same time.
s
"Optional Accessories" p.172
Part Names and Functions
20
Name
Function
Allows you to attach a commercially available strap.
Attachment for
optional strap or cord
D
E
Open this cover when replacing the battery.
Battery cover
s "Replacing the Battery for the Interactive Pen" p.20
The interactive pen turns off automatically after 20 minutes of
inactivity.
To use the pen again, tap the pen tip or press the button on the side
to turn on the power.
a
Replacing the Battery for the Interactive Pen
Name
Function
When you press the button, the battery light on the interactive pen lights or
flashes. Does not light or flash when the battery is exhausted. When the
light no longer lights or flashes, replace the battery. Use one of the
following types of battery. Other chargeable batteries cannot be used.
• Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
Pen Tip
A
operational.
• Hold the pen close to the projected image, and press to
• AA size manganese battery
• AA size alkaline manganese battery
use.
s "Using the Interactive Features (EB-536Wi only)"
*
• eneloop (HR-3UTG/HR-3UTGA/HR-3UTGB/BK-3MCC)
p.58
®
*eneloop is a registered trademark of the Panasonic Group.
s "Optional Accessories" p.172
®
Press the button on the side of the pen to indicate the
remaining battery power.
Battery light
B
Attention
• When the battery is charged, the light is lit green until
Make sure you read the following manual before handling the batteries.
you release the button.
s Safety Instructions
• When the battery is running low, the light flashes green
until you release the button.
• Does not light when the battery is exhausted. Change
the batteries.
s "Replacing the Battery for the Interactive Pen" p.20
Turn on the interactive pen. When turned on, it takes
approximately one second before the interactive pen is
operational.
Button
C
Part Names and Functions
21
Remove the battery cover.
Replace the battery cover.
a
c
While pushing the battery cover catch, lift the cover up.
Press the battery cover until it clicks into place.
Replace the old battery with new battery.
b
Replacing the Tip of the Interactive Pen
Slide the battery in negative side first.
Replace the tip of the interactive pen when it is worn.
s
"Optional Accessories" p.172
Turn the tip of the pen to remove it.
a
b
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the battery is inserted the correct way.
Turn the new tip to attach it.
If the batteries are not used correctly, they could explode or leak causing
a fire, injury, or damage to the product.
Preparing the Projector
This chapter explains how to install the projector and connect projection sources.
23
Installing the Projector
Installation Methods
Warning
• A special method of installation is required when suspending the projector
from a wall or ceiling. If it is not installed correctly, it could fall causing an
accident and injury.
The projector supports the following four different projection methods.
Install the projector according to the conditions of the installation location.
Turn the projector off when installing the projector or changing the
installation method. Turn the power back on after completing installation.
• If you use adhesives on the wall mount plate fixing points or the ceiling
mount fixing points to prevent the screws from loosening, or if you use
things such as lubricants or oils on the projector, the projector case may
crack causing it to fall from its mount. This could cause serious injury to
anyone under the mount and could damage the projector.
When installing or adjusting the mount, do not use adhesives to prevent the
screws from loosening and do not use lubricant or oil and so on.
• Project images from in front of
• Project images from behind a
translucent screen. (Rear projec-
tion)
the screen. (Front projection)
• Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
• Do not use the projector in a location subject to combustible or explosive gas.
The projector may catch fire due to the high internal temperature of the
lamp.
• Suspend the projector from a
wall or ceiling and project im-
ages from in front of a screen.
(Front/Ceiling projection)
• Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
Attention
Do not use the projector on its side. This may cause malfunctions to occur.
Installing the Projector
24
• Place the projector on a level surface.
If the projector is tilted the projected image is also tilted.
a • We recommend using a smooth, board type screen without any
unevenness. If the projection screen is uneven, there may be
distortions in the projected image.
• Distortions may occur in the projected image depending on the
material of the screen and the installation method.
• When installing the projector on a wall or on the ceiling, make sure
you use the correct tools for the installation method.
s "Optional Accessories" p.172
• The default Projection setting is Front. You can change from Front
to Rear from the Configuration menu.
s Extended - Projection p.120
• You can change the Projection mode as follows by pressing down
a • See the following if you cannot install the projector parallel to the
the [A/V Mute] button on the remote control for about five seconds.
screen.
FrontWFront/Ceiling
RearWRear/Ceiling
s "Correcting Keystone Distortion" p.48
• See the following if you cannot install the projector on a level
surface.
s "Adjusting the Horizontal Tilt" p.52
s "Correcting Keystone Distortion" p.48
Installation Methods
Install the projector as follows.
• Install the projector so that it is parallel to the screen.
If the projector is installed at an angle to the screen, keystone distortion
occurs in the projected image.
When Using the Interactive Features (EB-536Wi only)
Project from in front of the screen when using the interactive features. Set
the Projection mode to Front or Front/Ceiling.
Install the projector so that the angle of tilt is 7° vertically and 5°
horizontally against the projection side.
Installing the Projector
25
a • When using the interactive features, install so that the projected
screen is a rectangle without any distortion.
• When using the interactive features in the same room as multiple
projectors, Easy Interactive Pen operations may become unstable. In
this situation, connect the optional Remote control cable set
(ELPKC28) to the projectors, and change Sync of Projectors to
Wired from the Configuration menu.
s "Connecting Multiple Projectors (EB-536Wi only)" p.38
s Extended - Easy Interactive Function - General - Advanced -
Sync of Projectors p.123
Attention
The interactive features operates by infrared communication. Note the
following points when installing the projector.
• Make sure there is no strong light or sunlight shining on the Easy Interactive
Function receiver, the projection screen, the projector itself, or the rear of the
projector.
• Do not install the projector in direct sunlight through a window. This could
cause the interactive features to malfunction.
• If there is any dust stuck to the Easy Interactive Function receiver, it could
interfere with infrared communication and you may not be able to use the
function normally. Clean the receiver if it is dirty.
• Do not put paint or any stickers on the cover of the Easy Interactive
Function receiver.
• Install the projector so that the Easy Interactive Function receiver is not too
close to fluorescent lights. If the surrounding area is too bright, the
interactive features may not operate correctly.
• When using the interactive features, do not use an infrared remote control or
microphone in the same room. The Easy Interactive Pen could malfunction.
• Do not use devices that generate powerful noise, such as rotary devices or
transformers, near the projector. You may not be able to operate the
interactive features.
26
Connecting Equipment
The port name, location, and connector orientation differ depending on the source being connected.
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
When using the supplied or optional computer cable
A
Connect the computer's display output port to the projector's Computer1 or Computer2 port. You can output audio from the projector's speaker by connecting the computer's audio
output port to the projector's Audio1 or Audio2 port using a commercially available audio cable.
When using the supplied or commercially available USB cable
Connect the computer's USB port to the projector's USB-B port. Audio from the computer is output from the projector with the projected image.
When using a commercially available HDMI cable
B
C
Connect the computer's HDMI port to the projector's HDMI port. Audio from the computer is output from the projector with the projected image.
Connecting Equipment
27
a • You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.120
• If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the audio input port. After connecting the cable, select
the input port you connected to from HDMI Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI Audio Output p.120
• You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display.
s "Projecting with USB Display" p.45
Connecting Equipment
28
Connecting Image Sources
To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods.
When using a commercially available video or S-video cable
A
Connect the video output port on the image source to the projector's Video port. Or, connect the S-video output port on the image source to the projector's S-Video port. You can
output audio from the projector's speaker by connecting the audio output port on the image source to the projector's Audio-L/R port using a commercially available audio cable.
When using the optional component video cable
B
s "Optional Accessories" p.172
Connect the component output port on the image source to the projector's Computer1 or Computer2 port. You can output audio from the projector's speaker by connecting the audio
output port on the image source to the projector's Audio1 or Audio2 port using a commercially available audio cable.
When using a commercially available HDMI cable
C
Connect the HDMI port on the image source to the projector's HDMI port. Audio from the image source is output from the projector with the projected image.
Connecting Equipment
29
Attention
• Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction.
• If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a • You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.120
• If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the audio input port. After connecting the cable, select
the input port you connected to from HDMI Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI Audio Output p.120
• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projectors.
• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting Equipment
30
Connecting USB Devices
You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras.
Using the USB cable supplied with the USB device, connect the USB device to the USB-A port on the projector.
When the USB device is connected, you can project image files on the USB memory or digital camera using PC Free.
s
"Projecting Images Stored on a USB Storage Device (PC Free)" p.85
If the Document Camera is connected while projecting images from another input port, press the [USB] button on the remote control, or the [Source Search]
button on the control panel, to switch to images from the Document Camera.
s
"Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.43
• While projecting images from a USB device, if you want to connect an audio output device, connect it to the Audio2 port.
a
• You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.120
Connecting Equipment
31
Attention
• If you use a USB hub, operation may not be performed correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
• When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk.
• Connect a digital camera or hard disk to the projector using a USB cable supplied with or specified for use with the device.
• Use a USB cable less than three meters in length. If the cable exceeds 3 m, PC Free may not function correctly.
Removing USB Devices
After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from
the projector.
Connecting Equipment
32
Connecting a Microphone
You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone.
• Plug-in-power is not supported.
• Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound.
s Settings - Mic Input Level p.119
a
• Make the following settings to output audio from a microphone when the projector is off.
- Set Standby Mode to Communication On.
- Set A/V Output to Always On.
s ECO - Standby Mode p.133
s Extended - A/V Settings - A/V Output p.120
Connecting Equipment
33
Connecting External Equipment
You can output images and audio by connecting an external monitor or speaker.
When outputting images to an external monitor
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
When outputting audio to an external speaker
A
B
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
Connecting Equipment
34
a • When Standby Mode is set to Communication On, you can perform the following operations even when the projector is off (only when A/V Output is set to
Always On).
- Output images to an external monitor
- Output audio (audio being input from the USB-A, USB-B, or LAN ports cannot be output)
s ECO - Standby Mode p.133
s Extended - A/V Settings - A/V Output p.120
• Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video
signals.
• Setting gauges for functions such as Keystone, Configuration Menu, or Help screens are not output to the external monitor.
• Content drawn using the interactive features is not displayed on an external monitor (EB-536Wi only). Content drawn using the supplied Easy Interactive Tools
can be displayed on an external monitor.
• When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external
output.
Connecting Equipment
35
Connecting a LAN Cable
Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
By connecting a computer to the projector over a network, you can project images and check the status of the projector.
a To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Connecting Equipment
36
Installing the Optional Wireless LAN Unit
By installing the optional Wireless LAN unit, you can project a computer
screen over a network.
Connect the Wireless LAN unit to the projector's USB-A port.
a • When connecting to the network using wireless LAN, make sure you
make network settings from the Configuration menu.
s "Wireless LAN Menu" p.127
• If you normally leave the Wireless LAN unit installed, make sure
you attach the supplied wireless LAN unit cover as a theft deterrent.
• When moving the projector, make sure you remove the Wireless
LAN unit and cover for safety reasons.
Attach the wireless LAN unit cover, and secure it in place with the
screw.
c
Use a cross-head screwdriver to remove the screw that secures the
a
wireless LAN unit cover.
Connect the Wireless LAN unit to the USB-A port.
b
Connecting Equipment
37
Connect the Quick Wireless Connection USB Key to the computer
you are using.
Installing the Optional Quick Wireless Connection USB Key
f
When installing the optional Quick Wireless Connection USB Key, you
need to remove the Wireless LAN unit first, and then connect the Quick
Wireless Connection USB Key to the USB-A port.
For the steps from here on, see the User's Guide supplied with the
Quick Wireless Connection USB Key.
Turn on the projector, and then press the [LAN] button on the
remote control.
a
The LAN standby screen is displayed.
Check that the SSID and IP address information are displayed on
the LAN standby screen, and then remove the Wireless LAN
unit.
b
Connect the Quick Wireless Connection USB Key to the USB-A
port.
c
When the message "Network information update complete.
Remove the Quick Wireless Connection USB Key Adapter." is
displayed, remove the Quick Wireless Connection USB Key.
d
Reinstall the Wireless LAN unit on the projector.
e
Connecting Equipment
38
Connecting Multiple Projectors (EB-536Wi only)
When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional Remote control cable set
(ELPKC28) to the SYNC port on each projector. Interactive pen operations are stabilized by linking the projectors using cables.
In
Out
The SYNC port has an IN and OUT socket. When you connect one end of the Remote control cable set to an IN socket, connect the other end to an OUT
socket.
After connecting the cables, set Sync of Projectors to Wired from the Configuration menu.
s
Extended - Easy Interactive Function - General - Advanced - Sync of Projectors p.123
Connecting Equipment
39
a • When connecting three or more projectors, you do not need to connect the first projector to the last projector.
In
Out
In
Out
• When using the projector in the same room as another projector that does not support cable connection, set Wired Sync Mode to Mode 2 from the
Configuration menu.
s Extended - Easy Interactive Function - General - Advanced - Wired Sync Mode p.123
• If you do not have the optional Remote control cable set, change the Distance of Projectors setting from the Configuration menu.
s Extended - Easy Interactive Function - General - Advanced - Distance of Projectors p.123
Basic Usage
This chapter explains how to project and adjust images.
41
Projecting Images
Press the [t] power button on the control panel or the remote
control to turn on the projector.
Turning On the Projector
c
Check that a beep sounds and the status indicator flashes blue
(warm-up status). When warm-up is complete, the status indicator
stops flashing and remains blue.
Connect the computer or video equipment you want to use with the
projector before you turn on the projector.
s
"Connecting Equipment" p.26
Try one of the following if the image is not projected.
Remove the lens cover.
• Turn on the connected computer or video device.
a
b
• Change the screen output from the computer when using a laptop
computer.
Connect the projector to an electrical outlet with the power cord.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source Search] button on the control panel or the remote
control to detect the input sources.
s
"Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.43
• On the remote control, press the button the corresponds to the source.
s
"Switching to the Target Image Using the Remote Control" p.44
The projector's power indicator turns blue (standby status). In
standby status, power is being supplied to the projector, however it is
not turned on.
Projecting Images
Warning
42
Turning Off the Projector
• Do not look into the projector's lens during projection. Doing so could
Turn off this product when it is not in use to prolong the life of the
damage your eyes. Take particular care when there are children present.
projector. The lamp's operating life changes depending on the
Configuration menu settings, environmental conditions, and usage.
Brightness decreases over time.
a
• During projection, do not block the light from the projector with the lens
cover or a book and so on. If the light from the projector is blocked, the area
on which the light shines becomes hot which could cause the lens cover to
melt, burn, or start a fire. Also, the lens may get hot due to the reflected light
which could cause the projector to malfunction. To stop projection, use the
A/V Mute function, or turn off the projector.
• A mercury lamp with high internal pressure is used as the projector's light
source. If the lamp is subjected to vibrations, shocks, or if it is used for an
overly extended length of time, the lamp may break or it may not turn on. If
the lamp explodes, gases may escape and small fragments of glass may be
scattered which could cause an injury. Be sure to observe the instructions
below.
Press the [t] button on the control panel or the remote control.
a
The shutdown confirmation screen is displayed.
- Do not disassemble or damage the lamp or subject it to any impacts.
- Do not bring your face close to the projector while it is in use.
- Particular care should be taken when the projector is installed to a ceiling,
as small pieces of glass may fall down when the lamp cover is removed.
(When cleaning the projector or replacing the lamp yourself, be very careful
not to allow such pieces of glass to get into the eyes or mouth.)
If the lamp breaks, ventilate the area immediately, and contact a doctor if any
fragments of broken glass are inhaled or get into the eyes or mouth.
Press the [t] power button again. (To leave it on, press any other
button.)
b
c
After the beep sounds twice, the projected image disappears and the
status indicator turns off.
Since this projector does not require a cool-down time, you can
put it away or move it immediately.
a • When Direct Power On is set to On from the Extended menu, the
a
projector turns on automatically when the power cord is connected.
When the power cord is plugged in, note that the projector turns on
automatically in cases such as a power outage being restored.
Unplug the power code.
s Extended - Operation - Direct Power On p.120
• When Auto Power On is set to Computer1 in the Extended menu,
when an image signal is being input into the projector's Computer1
input port, the power turns on automatically. (Only when Standby
Mode is set to Communication On in the ECO menu.)
s Extended - Operation - Auto Power On p.120
Projecting Images
43
Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote control
Using the control panel
Attach the lens cover.
d
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
Projecting Images
44
a • You can make settings so that images are projected from the same
Switching to the Target Image Using the Remote
Control
input port the next time the projector is turned on.
s Extended - Operation - Startup Source Search p.120
• The following screen is displayed while no image signals are input.
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
Each time the button is pressed, it cycles through the images being input
from the following sources.
• Computer1 port
• Computer2 port
Each time the button is pressed, it cycles through the images being input
from the following sources.
A
B
• S-Video port
• Video port
• HDMI port
Each time the button is pressed, it cycles through the following images:
• USB Display
• Images from the device connected to the USB-A port
Switches to the image from the network connected device.
C
D
Projecting Images
45
Windows 8.1
Windows 8.1 32/64 bit
Windows 8.1 Pro 32/64 bit
Projecting with USB Display
Windows 8.1 Enterprise 32/64 bit
You can use the supplied or a commercially available USB cable to connect
the projector to a computer to project images from the computer.
Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
CPU
You can send the computer's audio with the projected image.
256 MB or more
Recommended: 512 MB or more
Amount of Mem
ory
When using EB-536Wi, set USB Type B to USB Display/Easy Interactive
Function or Wireless Mouse/USB Display to use USB Display.
20 MB or more
Hard Disk Space
Display
s
Extended - USB Type B p.120
Resolution of no less than 640 x 480 and no higher than
1920 x 1200.
Display color in 16-bit color or greater
System requirements
*1 Service Pack 4 only
For Windows
*1
For OS X
Windows 2000
Windows XP
OS
Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Mac OS X 10.5.x 32 bit
Mac OS X 10.6.x 32/64 bit
OS X 10.7.x 32/64 bit
OS X 10.8.x
OS
Windows Vista
Windows 7
Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
OS X 10.9.x
Power PC G4 1GHz or faster
Recommended: Core Duo 1.83GHz or faster
CPU
512 MB or more
Amount of Memo
ry
Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
20 MB or more
Hard Disk Space
Display
Resolutionofnolessthan640x480andnohigherthan1680x
1200.
Display color in 16-bit color or greater
Windows 8
Windows 8 32/64 bit
Windows 8 Pro 32/64 bit
Windows 8 Enterprise 32/64 bit
Projecting Images
46
Computer images are projected.
Connecting for the First Time
c
d
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
The first time you connect the projector and the computer using the USB
cable, the driver needs to be installed. The procedure is different for
Windows and OS X.
Disconnect the USB cable when you are finished.
When disconnecting the USB cable, there is no need to use Safely
Remove Hardware.
• You do not need to install the driver the next time you connect.
• When inputting images from multiple sources, change the input
source to USB Display.
a
• If you use a USB hub, the connection may not operate correctly.
a • If it is not installed automatically, double-click My Computer
Connect the USB cable directly to the projector.
- EPSON PJ_UD - EMP_UDSE.EXE on your computer.
• You cannot change option settings while using USB Display.
• If nothing is projected, click All Programs - EPSON
Projector - Epson USB Display - Epson USB Display
Ver.x.xx on your computer.
For Windows
• When using a computer running Windows 2000 under user
authority, a Windows error message is displayed and you may
not be able to use the software. In this case, try updating
Windows to the latest version, restart, and then try to connect
again.
For more details, contact your local dealer or the nearest
address provided in the following document.
Connect the computer's USB port to the projector's USB-B port
using the supplied or a commercially available USB cable.
a
For Windows 2000 or Windows XP, a message asking you if
you want to restart your computer may be displayed. Select
a
No.
s Epson Projector Contact List
For Windows 2000
For OS X
Double-click Computer - EPSON PJ_UD - EMP_UDSE.EXE.
Connect the computer's USB port to the projector's USB-B port
For Windows XP
a
using the supplied or a commercially available USB cable.
The Setup folder of USB Display is displayed in the Finder.
Double-click the USB Display Installer icon.
Driver installation starts automatically.
For Windows Vista/Windows 7/Windows 8/Windows 8.1
b
c
When the dialog box is displayed, click run EMP_UDSE.EXE.
When the License Agreement screen is displayed, click Agree.
Follow the on-screen instructions to install.
b
Projecting Images
47
When the License Agreement screen is displayed, click Agree.
d
For Windows XP
Enter the administrator authority password and start the installation.
When the installation is complete, the USB Display icon is displayed
in the Dock and menu bar.
Click Start, and then click Control Panel.
a
b
c
Double-click Add or Remove Programs.
Computer images are projected.
e
f
Select Epson USB Display, and then click Remove.
It may take a while before computer images are projected. Until
computer images are projected, leave the equipment as it is and do
not disconnect the USB cable or turn off the power to the projector.
When you have finished, select Disconnect from the menu bar or
from the USB Display icon on the Dock. You can then disconnect
the USB cable.
For Windows Vista/Windows 7
Click Start, and then click Control Panel.
a
b
c
Click Uninstall a program under Programs.
a • If the USB Display Setup folder is not displayed automatically
Select Epson USB Display, and then click Uninstall.
in the Finder, double-click EPSON PJ_UD - USB Display
Installer on your computer.
For Windows 8/Windows 8.1
• If nothing is projected for some reason, click the USB
Display icon in the Dock.
Open Charms, and then select Search. Right-click (hold down)
Epson USB Display Ver.x.xx.
• If there is no USB Display icon on the Dock, double-click
USB Display in the application folder.
• If you select Exit from the USB Display icon on the Dock,
USB Display does not start automatically when you connect
the USB cable.
a
Select Uninstall from the app bar.
b
c
d
Select Epson USB Display, and then click Uninstall.
Follow the on-screen instructions to uninstall.
Uninstalling
For OS X
For Windows 2000
Double-click Applications - USB Display - Tool.
Click Start, select Settings, and then click Control Panel.
a
b
a
b
c
d
Run USB Display Uninstaller.
Double-click Add/Remove Programs.
Click Change or Remove Programs.
Select Epson USB Display and click Change/Remove.
48
Adjusting Projected Images
When using EB-536Wi, you can use one of the following methods to
correct keystone distortion.
Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• Correcting automatically (Auto V-Keystone)
Automatically corrects vertical keystone distortion.
• Correcting manually (H/V-Keystone)
Manually correct distortion in the horizontal and vertical directions
independently.
• Correcting manually (H-Keystone Adjuster)
Manually corrects horizontal keystone distortion using the horizontal
keystone adjuster.
• Correcting manually (Quick Corner)
Manually correct the four corners independently.
When you correct keystone distortion, the projected image may be
reduced.
a
Adjusting Projected Images
49
Correcting Manually
You can manually correct keystone distortion.
You can use H/V-Keystone to correct the projected image under the
following conditions.
Correction angle for EB-536Wi: approx. 5Ëš right and left/approx. 7Ëš up and
down
Correction angle for EB-535W/EB-525W/EB-530/EB-520: approx. 15Ëš right
and left/approx. 15Ëš up and down
H/V-Keystone
Manually correct distortion in the horizontal and vertical directions
independently.
Press the [Wide] or [Tele] buttons to correct horizontal distortion.
Press the [w] or [v] button on the control panel during
projection to display the Keystone screen.
a
Press the following buttons to correct keystone distortion.
b
Press the [w] or [v] button to correct vertical distortion.
You can also set H/V-Keystone from the Configuration menu.
a
s Settings - Keystone - H/V-Keystone p.119
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
Adjusting Projected Images
50
Press the [Menu] button while projecting.
Select the corner to correct using the [
], [
], [ ] and [ ]
a
d
e
s
"Using the Configuration Menu" p.113
Using the remote control Using the control panel
buttons on the remote control, or the [w][v] [Wide], and [Tele],
buttons on the control panel, and then press the [ ] button.
Select Keystone from Settings.
b
Correct the position of the corner using the [
], [
], [ ], and
[ ] buttons on the remote control, or the [w], [v], [Wide]
and [Tele] buttons on the control panel.
When you press the [ ] button, the screen shown in step 4 is
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
Select Quick Corner, and then press the [ ] button.
c
Adjusting Projected Images
51
If the [Esc] button is held down for about two seconds while
the corner selection screen from step 4 is displayed, the
following screen is displayed.
a
Reset Quick Corner: Resets the result of Quick Corner
corrections.
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
Switch to H/V-Keystone: Switches the correction method to
H/V-Keystone.
f
g
s "Settings Menu" p.119
Press the [Esc] button to exit the correction menu.
Because Keystone was changed to Quick Corner, the corner
selection screen shown in step 4 is displayed the next time you press
the [w] or [v] button on the control panel. Change Keystone to
H/V-Keystone if you want to perform horizontal and vertical
correction using the [w] or [v] button on the control panel.
H-Keystone Adjuster (EB-536Wi only)
Move the horizontal keystone adjuster to the right or left to perform
horizontal keystone correction.
s
Settings - Keystone - H/V-Keystone p.119
a • When using H-Keystone Adjuster, set H-Keystone Adjuster to
On.
s Settings - Keystone - H/V-Keystone - H-Keystone Adjuster
p.119
• You can also correct keystone distortion in the horizontal direction
using H/V-Keystone.
Adjusting Projected Images
52
Correcting Automatically (EB-536Wi only)
Auto V-Keystone
When the projector detects any movement, for example when it is installed,
moved, or tilted, it automatically corrects vertical keystone distortion. This
function is called Auto V-Keystone.
When the projector remains still for about two seconds after it detects
movement, it displays a screen for adjustment and then automatically
corrects the projected image.
You can also make adjustments from the Configuration menu.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
a
s Settings - Zoom p.119
Correction angle: approx. 7Ëš up and down
Adjusting the Image Position
a • Auto V-Keystone works only when Projection is set to Front from
the Configuration menu.
s Extended - Projection p.120
Press the foot adjust lever to extend the front adjustable foot.
• If you do not want to enable Auto V-Keystone, set Auto V-
Keystone to Off.
s Settings - Keystone - H/V-Keystone - Auto V-Keystone
p.119
• If the projector is moved slightly, motions may not be detected and
Auto V-Keystone may not be performed.
Adjusting the Image Size
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
a
Press the [Wide] and [Tele] buttons on the control panel to adjust the size
of the projected image.
Adjusting the Horizontal Tilt
Extend and retract the rear feet to adjust the projector's horizontal tilt.
Adjusting Projected Images
53
• Press the [Volume] buttons on the remote control to adjust the volume.
[
a] Decreases the volume.
b] Increases the volume.
Remote control
[
Extend the rear foot.
Retract the rear foot.
A
B
• Adjust the volume from the Configuration menu.
s
Settings - Volume p.119
Correcting the Focus
Caution
You can correct the focus using the focus ring.
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Adjusting the Volume
Mode
Application
You can adjust the volume using one of the following methods.
Ideal for use in a bright room. This is the brightest mode.
Dynamic
Adjusting Projected Images
54
Mode
Application
Setting Auto Iris
Ideal for making presentations using color materials in a
bright room. Also ideal for watching TV programs with
vivid images in sharp contrast.
Presentation
By automatically setting the luminance according to the brightness of the
displayed image, it lets you enjoy deep and rich images.
Ideal for watching films in a dark room. Gives images a
natural tone.
Theatre
sRGB
Press the [Menu] button.
a
Ideal for reproducing images that conform to the
s
"Using the Configuration Menu" p.113
Using the remote control Using the control panel
sRGB colorstandard. Ideal forprojectingstillpictures,
g
such as photos.
Even if you are projecting onto a blackboard
(greenboard), this setting gives your images a natural
tint, just like when projecting onto a screen.
Blackboard
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
Select Auto Iris from Image.
b
c
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.116
a
Select Normal or High Speed.
The setting is stored for each Color Mode.
Adjusting Projected Images
55
Press the [Menu] button to finish making settings.
Changing the Aspect Mode (EB-536Wi/EB-535W/EB-525W only)
d
a • Auto Iris can only be set when the Color Mode is set to
Projecting images from video equipment or from the HDMI port
Dynamic or Theatre.
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Normal or Auto, 16:9, Full, Zoom, and
Native.
• When Auto Iris is set to Normal or High Speed, Light
Optimizer is enabled (this is also enabled when Light
Optimizer is set to Off and the settings cannot be changed).
Example: 1080p signal input (resolution: 1920 x 1080, aspect ratio: 16:9)
Changing the Aspect Ratio of the Projected Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available aspect modes vary depending on the image signal currently being
projected.
Changing Methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
Normal or Auto
16:9
Full
Zoom
Native
A
B
C
D
E
You can set the aspect ratio from the Configuration menu.
s Signal - Aspect p.117
a
Adjusting Projected Images
56
Projecting Images from a Computer
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
a
The following shows projection examples for each aspect mode.
computer panel.
Aspect Mode
Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
s Signal - Resolution p.117
Normal
Changing the Aspect Mode (EB-530/EB-520 only)
Projecting Images from Video Equipment
Each time the [Aspect] button is pressed, the aspect mode changes in the
16:9
Full
order 4:3 and 16:9.
When inputting a 720p/1080i signal and the aspect mode is set to 4:3, a 4:3
zoom is applied (the right and left sides of the image are cut off).
Example: 720p signal input (resolution: 1280 x 720, aspect ratio: 16:9)
Zoom
4:3
16:9
A
B
Native
Projecting Images from the HDMI Port
Each time the [Aspect] button is pressed, the aspect mode changes in the
order Auto, 4:3, and 16:9.
Example: 1080p signal input (resolution: 1920 x 1080, aspect ratio: 16:9)
Adjusting Projected Images
57
If parts of the image are missing, set the Resolution setting to Wide
or Normal from the Configuration menu, according to the size of the
a
computer panel.
s Signal - Resolution p.117
Auto
4:3
16:9
A
B
C
Projecting Images from a Computer
Each time the [Aspect] button is pressed, the aspect mode changes in the
order Normal, 4:3, and 16:9.
The following shows projection examples for each aspect mode.
Aspect Mode
Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
Normal
4:3
16:9
Using the Interactive Features (EB-536Wi only)
Follow the instructions in these sections to use the interactive features.
59
Interactive Feature Modes
The interactive features turn any wall into an interactive whiteboard, either
with or without a computer. Three interactive modes are available and it's
easy to shift between each mode:
• In whiteboard mode, you can use interactive pens to write on the
projected "whiteboard." You do not need to use a computer or install
any additional software to use the built-in whiteboard drawing feature.
• In annotation mode, you can use interactive pens to add notes to
content projected from a computer, tablet, document camera, or other
source. This helps you emphasize projected information or include
additional notes for more effective lessons or presentations.
Interactive Feature Modes
60
• In computer interactive mode, you can use interactive pens as you
would use a mouse. This allows you to navigate, select, and scroll
through content projected from your computer.
Make sure you have calibrated the first time you use your
projector.
b
s
"Pen Calibration" p.68
Project an image from a connected device.
c
d
Hold an interactive pen close to the projected screen.
To write or draw, tap the
or
toolbar tab.
e
You see the toolbar on the projected image, for example:
You can also use the Easy Interactive Tools software to provide
additional interactive features, such as saving your annotations, and
a
then printing them. See the Easy Interactive Tools Operation Guide
built into the software for instructions.
Drawing on a Projected Image (Annotation Mode)
Annotation mode lets you project from a computer, tablet, video device, or
other source and add notes to your projected content using the interactive
pens. You can use both pens at the same time.
Turn on the projector.
a
Interactive Feature Modes
61
Tap the
icon on the toolbar.
a • You can also control the projector from the projected screen
e
by using the projector control toolbar displayed on the screen.
You see the whiteboard screen and toolbar, for example:
Tap the
or
icon if the projector control toolbar is
not displayed.
• You can move the
and the or
and
toolbar tabs up and down,
toolbar tab right and left.
You can write on the projected screen.
s
"Using the Interactive Pens" p.67
"Interacting with the Screen" p.74
s
Using the Projected Screen as a Whiteboard
(Whiteboard Mode)
a • You can also control the projector from the projected screen
You can use the interactive pens to write or draw on the projection surface
just as you would on a chalkboard or dry erase board. You can use both
pens at the same time.
by using the projector control toolbar displayed on the screen.
Tap the
or
icon if the projector control toolbar is
not displayed.
Turn on the projector.
• You can move the
and the or
and
toolbar tabs up and down,
a
b
Make sure you have calibrated the first time you use your
projector.
toolbar tab right and left.
s
"Pen Calibration" p.68
To write or draw on the screen, use the toolbar on the right or left
side.
f
Hold an interactive pen close to the projected screen.
c
d
s
"Using the Interactive Pens" p.67
"Interacting with the Screen" p.74
Tap the
or
toolbar tab.
s
The toolbar is displayed.
Interactive Feature Modes
62
Windows 8
• Windows 8 (32/64 bit)
• Windows 8 Pro (32/64 bit)
• Windows 8 Enterprise (32/64 bit)
You can also use the Easy Interactive Tools software to provide
additional interactive features, such as treating the drawing area as a
page, and creating multiple pages to draw on. See the Easy Interactive
Tools Operation Guide for instructions.
a
Windows 8.1
• Windows 8.1 (32/64 bit)
• Windows 8.1 Pro (32/64 bit)
• Windows 8.1 Enterprise (32/64 bit)
Controlling a Computer from the Projected Screen
(Computer Interactive Mode)
Mac
OS X
• Mac OS X 10.5.x
• Mac OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
You can navigate, select, and interact with your computer programs from
the projected screen using the interactive pens, just as you would with a
mouse.
Ubuntu
Ubuntu
Computer Interactive Mode System Requirements
• 12.04 LTS
• 12.10
Your computer must use one of the following operating systems to use the
computer interactive mode.
• 13.04
• 13.10
• 14.04 LTS
Windows
Windows XP Service Pack 2 and Service Pack 3
• Professional (32 bit)
• Home Edition (32 bit)
• Tablet PC Edition (32 bit)
Using Computer Interactive Mode
Windows Vista Service Pack 2
You can control your computer programs with the projected screen using
computer interactive mode.
• Ultimate (32 bit)
• Enterprise (32 bit)
• Business (32 bit)
• Home Premium (32 bit)
• Home Basic (32 bit)
To use computer interactive mode, connect your computer to the projector
with the supplied USB cable.
For OS X, you need to install the Easy Interactive Driver to use computer
interactive mode.
Windows 7 Service Pack 1
• Ultimate (32/64 bit)
• Enterprise (32/64 bit)
• Professional (32/64 bit)
• Home Premium (32/64 bit)
Interactive Feature Modes
63
a • When you use multiple displays with Windows 7 and use interactive
- Set the Pen Operation Mode setting to One User/Pen in the Easy
Interactive Function setting in the projector's Extended menu.
features on the secondary display, make the following settings:
- Go to Control Panel > Hardware and Sound > Table PC Settings
> Setup to launch the setup program and configure the interactive
features.
If you set up a third display, you cannot use interactive features with
that display.
You cannot write or draw across multiple screens.
• To use computer interactive mode over a network, you need to
install EasyMP Network Projection version 2.85 or later (for
Windows) or 2.83 or later (for OS X), or Quick Wireless version
1.32 or later.
Select the USB Type B setting and press the [Enter] button.
f
g
If you are using OS X, install the Easy Interactive Driver on your
computer the first time you use the interactive features.
a
s
"Easy Interactive Driver System Requirements (OS X only)"
p.65
s
"Installing Easy Interactive Driver on OS X" p.65
Connect the projector to your computer using a USB cable.
b
You do not need a USB cable when using computer interactive
mode over a network.
a
s "Using the Interactive Features over a Network" p.80
Turn on the projector.
c
d
e
Select one of the following:
Project your computer's desktop.
• When projecting using a computer cable or over a network, select
Easy Interactive Function.
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
Interactive Feature Modes
64
• To use computer interactive mode and USB Display at the same
Hold an interactive pen close to the projected screen.
l
m
time, select USB Display/Easy Interactive Function.
The
icon is displayed on the projected screen.
When projecting using USB Display, response time may be
slower.
a
icon is displayed on the right for the first time.
a • The
Next time, it is displayed on the side from which you last
opened the toolbar.
Select the Easy Interactive Function setting from the Extended
menu, and then press the [Enter] button.
h
i
• If the
icon is not displayed, set the Pen Mode Icon
setting to On in the projector's Extended menu.
s Extended - Display - Pen Mode Icon p.120
Set the Pen Operation Mode to Two Users/Mouse or One
User/Mouse.
Select the
icon, and then select the
icon.
Press the [Enter] button, and then press the [Menu] button to exit
the projector's menu system.
j
k
Make sure you have calibrated the first time you use your
projector.
s
"Pen Calibration" p.68
Interactive Feature Modes
65
Easy Interactive Driver System Requirements (OS X only)
You can also change to computer interactive mode by doing the
following:
a
To use computer interactive mode, you must install the Easy Interactive
Driver on your computer. Check the system requirements necessary to run
the software.
• Pressing the [Pen Mode] button on the remote control.
• Changing the Pen Mode setting on the projector's Extended
menu to PC Interactive.
s Extended - Easy Interactive Function - Pen
Mode p.123
Operating Systems
Mac OS X 10.5.x
Mac OS X 10.6.x
OS X 10.7.x
OS X 10.8.x
OS X 10.9.x
You can now operate the computer using the interactive pen.
s
s
s
"Using the Interactive Pens" p.67
CPU
Power PC G4 1 GHz or faster
(Recommended: CoreDuo 1.83 GHz or faster)
"Interacting with the Screen" p.74
Amount of Memory
Hard Disk Space
Display
512 MB or more
100 MB or more
"Using the Interactive Features over a Network" p.80
Resolutions no lower than 1024 x 768 (XGA)
and no higher than 1920 x 1200 (WUXGA)
16-bit color or greater (approximately 32,000
display colors)
a • You can also control the projector from the projected screen by
using the projector control toolbar displayed on the screen. Tap the
or
• You can move the
or toolbar tab right and left.
icon if the projector control toolbar is not displayed.
and toolbar tabs up and down, and the
Installing Easy Interactive Driver on OS X
Install Easy Interactive Driver on your computer to use computer
interactive mode.
• You can also do the following in computer interactive mode:
- Use the Tablet PC input panel in Windows 7 or Windows Vista.
- Use Ink Tools for annotation in Microsoft Office applications.
You may have already installed Easy Interactive Tools using the Easy
• Using two interactive pens at the same time may cause interference
in some application software. In that case, move any pen you are not
using away from the projection screen.
Install option, which also installs Easy Interactive Driver. See the Easy
a
Interactive Tools Operation Guide in the Document CD-ROM for
details.
Turn on your computer.
a
Interactive Feature Modes
66
Insert the EPSON Projector Software for Easy Interactive Function
CD into the computer.
b
You see the EPSON window.
Double-click the Install Navi icon in the EPSON window.
Select Custom Install.
c
d
e
f
Follow the on-screen instructions to install.
Restart your computer.
67
Using the Interactive Pens
Your projector comes with a blue pen and an orange pen, identified by the
color on the end of the pen. You can use either pen, or both at the same
time (one of each color).
Attention
• Do not use interactive pens with wet hands or in locations where the pens
may get wet. The pen is not waterproof.
• Keep the projector and projection screen out of direct sunlight, or the
interactive features may not work.
Make sure the pen batteries are installed.
a • The pens turn off automatically after 20 minutes of inactivity. To
turn a pen back on, tap the pen tip or press the button on the
side.
• For best performance, hold the pen perpendicular to the board, as
shown below. Do not cover the black band near the tip of the
pen.
Pen tip
Battery light
Button
Attachment for optional strap or cord
Battery cover
A
B
C
D
E
You can do the following using the pen:
To turn on the pen, tap the pen tip or press the button on the side.
When you are finished using the pen, leave the pen as it is far from the
projection screen.
s
"Easy Interactive Pen (EB-536Wi only)" p.19
Using the Interactive Pens
68
• Write or draw on the projection surface in annotation mode and
whiteboard mode.
a • If you do not want to use the hovering feature, you can turn it off
using the Easy Interactive Function setting in the projector's
Extended menu.
s Extended - Easy Interactive Function - Hovering p.123
• To make a long press of the pen act as a right-click, select the
following settings in the Easy Interactive Function setting in the
projector's Extended menu.
- Set the Pen Operation Mode to Two Users/Mouse or One
User/Mouse.
- Set Enable Right Click to On.
• To select a projected item, such as an icon, tap the projection
surface with the pen tip.
• To draw on the projected screen, tap the projection surface with
the pen and drag it as necessary.
• To move the projected pointer, hover over the surface without
touching it.
Pen Calibration
Calibration coordinates the positioning of the pen with the location of your
cursor. You only need to calibrate the first time you use your projector.
• Use the pen as a mouse in computer interactive mode.
You can use Auto Calibration to calibrate the system, but Manual
Calibration is also available for finer adjustments or if Auto Calibration
failed.
a • Move any pen you are not using away from the projection screen
while calibrating the system.
• Calibrate the system again if you notice any discrepancy in
positioning after doing any of the following:
- Performing Keystone correction
- Adjusting the image size
• To left-click, tap the board with the pen tip.
• To double-click, tap twice with the pen tip.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
- Changing the projector position
• The calibration results remain until you recalibrate.
Calibrating Automatically
You need to calibrate the first time you use your projector, and you do not
need the pens or a computer for Auto Calibration.
Using the Interactive Pens
69
When you hold down the [A/V Mute] button on the top of the projector
for approximately three seconds, a pattern is projected and Auto Calibration
begins.
Calibrating Manually
If the cursor location and pen position do not match after auto calibration,
you can calibrate manually.
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
a
If Auto Calibration fails, an error message is displayed. Perform Manual
Calibration.
The cursor location and pen position should match after calibration. If not,
you may need to perform Manual Calibration.
Select the Easy Interactive Function setting and press the [Enter]
button.
b
a • You can perform Auto Calibration from the Configuration menu.
Perform operations as instructed in the message displayed.
s Extended - Easy Interactive Function - Auto
Calibration p.123
• You cannot perform Auto Calibration from the remote
control's [A/V Mute] button. When you hold down the remote
control's [A/V Mute] button, the Projection changes.
s Extended - Projection p.120
Using the Interactive Pens
70
Select Manual Calibration and press the [Enter] button.
c
Adjust the focus if necessary, by sliding the focus lever.
d
e
Select Yes and press the [Enter] button.
A flashing green circle appears in the upper left corner of your
projected image.
Touch the center of the circle with the tip of the pen.
f
The circle disappears, and you see another circle below the first
one.
The following screen appears.
Using the Interactive Pens
71
For the most accurate calibration, make sure you touch the
center of the circle.
a • Make sure you are not blocking the signal between the pen
• If you make a mistake, press the [Esc] button on the remote
control to go back to the previous circle.
and the interactive receiver.
a
• To cancel the calibration process, press and hold the [Esc]
button for 2 seconds.
Continue until all of the circles disappear.
h
Adjusting the Pen Operation Area
Touch the center of the next circle, then repeat. When you get to
the bottom of the column, the next circle appears at the top of a
new column.
The pen operation area is normally adjusted automatically if you connect a
different computer or adjust the computer's resolution. If you notice that
the pen position is incorrect when you operate your computer from the
projected screen (computer interactive mode), you can adjust the pen area
manually.
g
Manual adjustment is not available when projecting from a LAN
source.
a
Switch to computer interactive mode, if necessary.
a
s
"Using Computer Interactive Mode" p.62
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
b
Using the Interactive Pens
72
Select the Easy Interactive Function setting and press the [Enter]
button.
Select Manual Adj. Pen Area, and then press the [Enter] button.
c
d
e
f
Select Yes, and then press the [Enter] button.
In the PC Interactive section, select Advanced and press
the [Enter] button.
Using the Interactive Pens
73
The mouse pointer moves towards the top left.
When the mouse pointer stops at the top left corner of the image,
touch the tip of the pointer with the pen.
g
h
The mouse pointer moves towards the bottom right corner.
When the mouse pointer stops at the bottom right corner of the
image, touch the tip of the pointer with the pen.
74
Interacting with the Screen
Follow these instructions to interact with the projected image or control the
projector.
• To switch between annotation mode and whiteboard mode, select the
following icon in the toolbar.
Switching the Interactive Mode
You can easily switch the interactive mode using the toolbar.
• To switch between computer interactive mode and annotation mode,
select one of the following icons:
• To change from annotation mode or whiteboard mode to
computer interactive mode:
a • You can also change the interactive mode by doing the following:
- Pressing the [Pen Mode] button on the remote control.
- Switching to PC Free Annotation or PC Interactive in the Pen
Mode setting on the projector's Extended menu.
s Extended - Easy Interactive Function - Pen Mode p.123
• You can switch to computer interactive mode when you project the
computer screen.
• You cannot switch to computer interactive mode when the USB
Type B setting in the projector's Extended menu is set to Wireless
Mouse/USB Display.
• The computer screen is projected when you switch to computer
interactive mode from whiteboard mode.
• To change from computer interactive mode to annotation mode
or whiteboard mode:
• After changing to computer interactive mode, content drawn using
annotation mode is retained.
Interacting with the Screen
75
Redoes the last undo.
Annotation Mode and Whiteboard Mode Toolbars
The annotation mode toolbar or the whiteboard mode toolbar lets you draw
and write on the projected screen. The toolbar also lets you easily switch to
annotation or whiteboard mode.
Selects a white or black background or one of four patterns
(whiteboard mode only).
s "Selecting Whiteboard Templates" p.77
In the following illustration, the annotation mode toolbar is shown on the
left, and the whiteboard mode toolbar on the right:
Writes or draws free-form lines with custom pen.
Select the
icon to change custom pen color and width.
s "Selecting Line Width and Color" p.76
Writes or draws free-form lines with a transparent highlighter
pen.
Select the
icon to change highlighter pen color and width.
s "Selecting Line Width and Color" p.76
Changes to a black pen. Click on the right of the icon to draw
thick lines, and click on the left of the icon to draw fine lines.
Changes to a red pen. Click on the right of the icon to draw
thick lines, and click on the left of the icon to draw fine lines.
Changes to a blue pen. Click on the right of the icon to draw
thick lines, and click on the left of the icon to draw fine lines.
Switches to annotation mode.
Switches to whiteboard mode.
Undoes the last operation.
Switches to an eraser. Click on the right of the icon to erase
wider areas, and click on the left of the icon to erase narrower
areas.
Clears all drawings.
Interacting with the Screen
76
Displays which tool you are using with your pen
.
: Using pen tools. The color of the icon indicates the color
of the pen.
: Using eraser tools.
Hides or shows the toolbar while drawing.
: The toolbar is hidden while drawing.
: The toolbar is always displayed.
Closes the toolbar.
Select the line width and color you want to use for the Pen or
Highlighter tools.
b
c
Selecting Line Width and Color
You can select the color and line width for both the custom Pen and the
Highlighter tools.
a • As you hover over the color palette, the name of the color is
displayed at the bottom of the palette.
• You can change the shade of the color palette using the Color
Select the
icon next to the custom Pen or Highlighter
Palette setting in the projector's Extended menu.
a
s Extended - Easy Interactive Function - General -
Advanced - Color Palette p.123
annotation tool.
A box like the following appears.
Select the
or
tool, and then use the pen to write or
draw on the projection surface.
When multiple people draw on the projected screen using the multiple
pens, you can select different colors and line widths for each pen.
a
Interacting with the Screen
77
Selecting Whiteboard Templates
Turns off the projector.
In whiteboard mode, you can change the background color, and insert
horizontal lines or a background template.
Changes the image source using the displayed list.
To close the image source list, select the
bottom of the list.
icon at the
In whiteboard mode, select the
icon.
a
A box like the following appears:
Zooms into and out of the image using the scale or the + and -
icons in the displayed list. You can do the following:
• The image can be enlarged between 1 to 4 times. To return to
the original image size, select x1.
• You can expand and reduce quickly by holding down the +
or - icon.
To close the scale list, select the
list.
icon at the bottom of the
Turns off picture and sound.
Tap the projected screen to turn the video and audio on.
s "Hiding the Image and Sound Temporarily (A/V Mute)"
Select one of the template patterns.
p.90
b
Pauses video action.
s "Freezing the Image (Freeze)" p.91
Projector Control Toolbar
The projector control toolbar lets you control the projector from the
projected screen just as you would using the remote control.
Decreases the volume.
s "Adjusting the Volume" p.53
If your network device is connected to the projector using EasyMP Multi
PC Projection, you can also use the toolbar to select the network device
from which you want to project.
Increases the volume.
s "Adjusting the Volume" p.53
Closes the projector control toolbar.
Interacting with the Screen
78
Selecting Network Device Display from the Projector Control
Toolbar
If you have connected devices to the projector via a network, you can select
to project an image from those devices using the projector control toolbar.
You can select the image source from computers that are running EasyMP
Multi PC Projection, and smartphones or tablets that are running Epson
iProjection. You can change the projected screen by selecting from among
up to 50 devices.
You can select any connected network device for projection, even if
the user connected using the EasyMP Multi PC Projection software
a
with the moderator feature enabled. See the EasyMP Multi PC
Projection Operation Guide for details about the moderator feature.
s EasyMP Multi PC Projection Operation Guide
Displays the user names for network devices connected to the projector.
A
The
icon is shown next to the user name of the currently projected
Select the
icon on the projector control toolbar, and then
a
device.
select Participant List from the image source list.
Closes the user selection screen and returns to the previous screen.
Refreshes the user list.
B
C
Whenanadditionaluserconnectstotheprojectorviaanetwork, select this
button to update the user list.
Select the user name for the device you want to project from.
b
Interacting with the Screen
79
a • When a selected device is disconnected from the projector,
the selected user's screen is not displayed, and the user's list is
automatically updated.
• While the user selection screen is displayed, you cannot do
the following:
- Select a different image source
- Use other interactive features
- Control the projector from the projector control toolbar
- Connect to multiple projectors
- Hear sound from the projector (it is turned off temporarily)
- Change the settings using the projector's Configuration
menu
- Project an image using EasyMP Multi PC Projection or
Epson iProjection
You see the selected user's screen image.
When you change the user, repeat these steps.
a • You cannot access the user selection screen when connecting to
multiple projectors by using EasyMP Multi PC Projection and
projecting the same image (mirroring).
• If the interactive features do not work, you can return to the
previous screen by pressing the [Esc] button on the remote control
or the control panel.
80
Using the Interactive Features over a Network
You can use your projector in computer interactive mode over a network.
• You can only use one pen at a time.
If you want to annotate when using computer interactive mode over a
network, you need to use Easy Interactive Tools (or another annotation
program). Easy Interactive Tools allows you to use various drawing tools,
treat the drawing area as a page, and save your drawings as a file for a later
use. You can install Easy Interactive Tools from the EPSON Projector
Software for Easy Interactive Function CD. You can also download the
software from the Epson website.
a
• The response may be slower over the network.
• When using computer interactive mode over a network, you cannot
change the Pen Mode setting using the remote control or from the
projector's Extended menu. The
icon is also not available.
• You cannot change the Pen Operation Mode setting from the
projector's Extended menu.
• You can connect up to four projectors at one time using EasyMP
Network Projection. When connected to multiple projectors,
computer interactive mode functions for any projector. Operations
performed on one projector are reflected in other projectors.
• To use annotation mode over the network, clear Use Interactive Pen
on the General settings tab and Transfer layered window on the
Adjust performance tab in EasyMP Network Projection or Quick
Wireless Connection, and then reconnect to the network.
• Use one of the following software applications to setup your projector
on a computer network and use computer interactive mode over the
network:
• EasyMP Network Projection version 2.85 or later (for Windows)
or 2.83 or later (for OS X)
See the EasyMP Network Projection Operation Guide for instruc-
tions.
s
EasyMP Network Projection Operation Guide
• Quick Wireless version 1.32 or later (Windows only)
See the instructions included with the optional Quick Wireless
Connection USB Key.
Precautions When Connecting to a Projector on a
Different Subnet
• With either application, select Use Interactive Pen on the General
settings tab and Transfer layered window on the Adjust performance
Follow these precautions when you connect to a projector on a different
subnet using EasyMP Network Projection and use interactive features:
tab.
• Search for the projector on the network by specifying the projector's IP
address. You cannot search for it by specifying the projector name.
• Make sure that you get an echo reply back from the network projector
when sending an echo request by the ping command. When the
Internet Control Message Protocol (ICMP) option is disabled on the
router, you can connect to the projector at remote locations even if you
cannot get the echo reply back.
Using the Interactive Features over a Network
81
• Make sure the following ports are opened.
Port
Protocol
Usage
Communication
Duplex
3620
TCP/UDP
For connection
and control
3621
3629
TCP
TCP
For transferring
images
Duplex
Duplex
For controlling
projector
• Make sure that the MAC address filtering and application filtering
options are disabled on the router.
• Make sure that Network Address Translation (NAT) technology is not
used in your network environment. With Internet VPN and IP-VPN,
you can connect to the network projector remotely when you meet the
above requirements.
• When bandwidth management is applied for communications between
locations, and EasyMP Network Projection goes over the controlled
bandwidth, you may not be able to connect to the projector at remote
locations.
Epson does not guarantee the connection to the projector on a
different subnet using EasyMP Network Projection even if you meet
a
the above requirements. When considering the implementation, be
sure to test the connection in your network environment.
82
Windows Pen Input and Ink Tools
If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista,
you can use the pen input and Ink tools to add handwritten input and
annotations to your work.
You can also use the pen input and Ink features over a network when you
set the interactive features to be available on your network.
Enabling Windows Pen Input and Ink Features
If you want to use the pen input and Ink features in Windows 8.1,
Windows 8, Windows 7, or Windows Vista, you need to adjust the pen
settings in the projector's Extended menu.
Press the [Menu] button, select the Extended menu, and press
the [Enter] button.
Select the Pen Operation Mode setting and press the [Enter]
a
c
d
button.
Select the Easy Interactive Function setting and press the [Enter]
button.
Select One User/Pen and press the [Enter] button.
b
Windows Pen Input and Ink Tools
83
For more information about these features, see your Windows Help.
Using Windows Pen Input and Ink Features
If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista,
you can add handwritten input and convert it to text.
If you have Microsoft Office 2007 or later, you can also use the Ink
function to add handwritten notes to a Word document, Excel spreadsheet,
or PowerPoint presentation.
Option names for the annotation functions may vary depending on
your version of Microsoft Office.
a
• To open the Touch Keyboard in Windows 8, right-click or tap and
hold on the Taskbar, then select Toolbars > Touch Keyboard. Select
the keyboard icon on the screen, then select the pen icon.
• To open the Tablet PC input panel in Windows 7 or Windows Vista,
select
> All Programs > Accessories > Tablet PC > Tablet PC
Input Panel.
You can write in the box using the pen, then select from a variety of
options to edit and convert the text.
• To add Ink annotations in Microsoft Office applications, select the
Review menu, then select Start Inking.
In Microsoft Word or Excel, select the Insert tab and then click on
Start Inking.
a
• To annotate your PowerPoint slides in Slideshow mode, press the
button on the side of the pen, and then select Pointer Options > Pen
from the pop-up menu.
This method for annotating PowerPoint slides in Slideshow mode also
works with Windows XP Tablet PC Edition.
a
Useful Functions
This chapter explains useful tips for giving presentations, and the Security functions.
85
Projection Functions
Type
File Type (Ex
tension)
Notes
Projecting Images Stored on a USB Storage Device
(PC Free)
.avi (Motion
JPEG)
• Cannot project images with a resolution greater
than 1280 x 720.
By connecting a USB storage device such as a USB memory or a USB hard
disk to the projector, you can project the files stored on the device without
using a computer. This function is called PC Free.
• You can only playback the audio formatted with
linear PCM and ADPCM.
• Supports AVI 1.0. You cannot project files over 2
GB.
a • You may not be able to use USB storage devices that incorporate
security functions.
• You cannot correct keystone distortion while projecting in PC Free,
even if you press the [w] and [v] buttons on the control panel.
a • When connecting and using a USB-compatible hard disk, make sure
• The projector does not support some file systems, so use media that
has been formatted in Windows.
you connect the AC adaptor supplied with the hard disk.
• Format the media in FAT16/32.
Specifications for Files that Can Be Projected Using PC Free
Type
File Type (Ex
tension)
Notes
PC Free Examples
Image
.jpg
The following cannot be projected.
- CMYK color mode format
Projecting Images Stored on USB Storage
- Progressive format
- Images with a resolution greater than 8192 x 8192
Due to the characteristics of JPEG files, images may
not be projected clearly if the compression ratio is
too high.
.bmp
.gif
Cannot project images with a resolution greater
than 1280 x 800.
• Cannot project images with a resolution greater
than 1280 x 800.
• Cannot project animated GIFs.
.png
Cannot project images with a resolution greater
than 1280 x 800.
s
s
"Projecting the Selected Images or Movies" p.87
"Projecting Image Files in a Folder in Sequence (Slideshow)" p.88
Projection Functions
86
PC Free Operating Methods
a • You can also insert a memory card into a USB card reader and then
available USB card readers may not be compatible with the
projector.
connect the reader to the projector. However, some commercially
Although the following steps are explained based on the remote control,
you can perform the same operations from the control panel.
• The projector can recognize up to five media at a time.
• If the following screen (Select Drive screen) is displayed, use the
Starting PC Free
[
], [
], [ ], and [ ] buttons to select the drive you want to
Change the source to USB.
a
use, and then press the [Enter] button.
s
"Switching to the Target Image Using the Remote Control"
p.44
Connect the USB storage device to the projector.
b
s
"Connecting USB Devices" p.30
PC Free starts and the file list screen is displayed.
• The following files are displayed as thumbnails (file contents are
displayed as small images).
- JPEG files
- AVI files (displays the image at the start of the movie)
• Other files or folders are displayed as icons as shown in the
following table.
• To display the Select Drive screen, position the cursor on Select
Drive at the top of the file list screen, and then press the [Enter]
button.
Icon
File
Icon
File
*
JPEG files
BMP files
Projecting Images
GIF files
PNG files
Use the [
], [
], [ ], and [ ] buttons to select the file or
a
folder you want to project.
AVI (Motion JPEG)
*
files
*
When it cannot be displayed as a thumbnail, it is displayed as an icon.
Projection Functions
87
While projecting, press the [
] or [
] button.
b
If not all of the files and folders are displayed on the current
screen, press the []] button on the remote control, or position
the cursor on Next Page at the bottom of the screen and press
the [Enter] button.
a
Stopping PC Free
To return to the previous screen, press the [[] button on the
remote control, or position the cursor on Previous Page at the
top of the screen and press the [Enter] button.
To close PC Free, disconnect the USB device from the USB port on the
projector. For devices such as digital cameras or hard disks, turn off the
device and then remove it from the projector.
Press the [Enter] button.
b
The selected image is displayed.
Projecting the Selected Images or Movies
Attention
When a folder is selected, the files in the selected folder are
displayed. To return to the screen which was displayed before
opening the folder, position the cursor on Back to Top and press
the [Enter] button.
Do not disconnect the USB storage device while it is being accessed. PC Free
may not operate correctly.
Rotating Images
Start PC Free.
a
You can rotate the played images in 90Ëš increments. The rotating function
is also available during PC Free.
The file list screen is displayed.
s
"Starting PC Free" p.86
Play images, or run PC Free.
a
Projection Functions
88
When projection is finished, you are returned to the file list screen.
Press the [
], [
], [ ], and [ ] buttons to select the image file
b
you want to project.
Projecting Image Files in a Folder in Sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time. This
function is called Slideshow. Use the following procedure to run
Slideshow.
To change files automatically when you run PC Free, set Screen
Switching Time from Option to anything other than No. The default
a
setting is 3 seconds.
s "Image File Display Settings and Slideshow Operation Settings"
p.89
Start PC Free.
a
The file list screen is displayed.
Press the [Enter] button.
c
d
s
"Starting PC Free" p.86
The image is displayed.
Use the [ ], [ ], [ ], and [ ] buttons to position the cursor
b
c
on the folder you want to run the Slideshow, and then press
the [Enter] button.
Select Slideshow at the bottom of the file list screen, and then
press the [Enter] button.
Slideshow starts, and the image files in the folder are automatically
projected in sequence, one at a time.
] or [ ] buttons to move to the next or previous
a Press the [
image file.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On in the Option
To finish projecting, perform one of the following operations.
• Projecting an image: Press the [Esc] button.
• Projecting a movie: Press the [Esc] button to display the message
screen, select Exit, and then press the [Enter] button.
Projection Functions
89
screen, projection starts again from the beginning when it reaches
the end.
When the following Option screen is displayed, set each of the
items.
b
s
"Image File Display Settings and Slideshow Operation Settings"
Enable the settings by positioning the cursor on the target item and
pressing the [Enter] button.
p.89
You can proceed to the next screen, return to the previous screen, or
stop playback while projecting a Slideshow.
The following table shows the details for each item.
If Screen Switching Time on the Option screen is set to No, files do
not change automatically when you select Play Slideshow. Press the
a
[
] button, the [Enter] button, or the []] button to continue to the
next file.
You can use the following functions when projecting an image file with PC
Free.
• Freeze
s
"Freezing the Image (Freeze)" p.91
You can select to display the files in Name Order or Date
Display Order
Sort Order
• A/V Mute
Order.
s
"Hiding the Image and Sound Temporarily (A/V Mute)" p.90
You can select to sort the files In Ascending or In
Descending order.
• E-Zoom
s
"Enlarging Part of the Image (E-Zoom)" p.92
You can set whether to repeat the Slideshow.
Continuous
Play
You can set the time for a single file to be displayed in Play
Slideshow. You can set a time between No (0) to 60
seconds. When you set No, auto play is disabled.
Screen Switch
ing Time
Image File Display Settings and Slideshow Operation Settings
You can set the file display order and Slideshow operations on the Option
screen.
You can set the screen effects when changing slides.
Effect
Select Option at the bottom of the file list screen, and then press
the [Enter] button.
a
Projection Functions
90
Use the [
], [
], [ ], and [ ] buttons to position the cursor
a • In the following situations, Flip Horizontal turns off.
c
- When the projector is off
over OK, and then press the [Enter] button.
- When the Configuration menu is displayed
- When the projector's Projection mode is changed
- When performing Keystone
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel, and then press the [Enter] button.
- When Message Broadcasting is running
• The interactive function does not operate correctly during Flip
Horizontal (EB-536Wi only).
Flipping the Image Horizontally (Flip Horizontal)
You can temporarily flip the image horizontally and project.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can switch off the image on the screen when you want to focus the
audience's attention on what you are saying, or when you do not want to
display operations such as changing files.
When User Button is set to Flip Horizontal from the Configuration menu,
each time you press the [User] button, Flip Horizontal turns on or off.
s
Settings - User Button p.119
Each time you press the [A/V Mute] button, A/V Mute turns on or off.
Remote control
Top of projector
Projection Functions
91
• Audio does not stop.
a • If you use this function when projecting moving images, the images
a
and sound continue to be played back by the source, and you cannot
• When projecting moving images, the images continue to be played
back while the screen is frozen. It is not possible to resume
projection from the point where the screen was frozen.
• If the [Freeze] button is pressed while the Configuration menu or
the Help screen is displayed, the menu or the Help screen that is
displayed is closed.
return to the point where A/V Mute was activated.
• Microphone audio is still output even when A/V Mute is turned
on.
• You can select the screen displayed when the [A/V Mute] button is
pressed from the Configuration menu.
s Extended - Display - A/V Mute p.120
• Freeze still works while E-Zoom is being used.
• When A/V mute is enabled with the [A/V Mute] button, A/V Mute
Timer activates and the power is automatically turned off after
approximately 30 minutes. If you do not want to enable A/V Mute
Timer, set A/V Mute Timer to Off.
s ECO - A/V Mute Timer p.133
• The lamp is still lit during A/V Mute, so the lamp hours continue to
accumulate.
Pointer Function (Pointer)
This allows you to move a Pointer icon on the projected image, and helps
you draw attention to the area you are talking about.
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues to
project on the screen, so you can project a moving image one frame at a
time like a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting any
images if the Freeze function is activated beforehand.
Display the Pointer.
a
Each time you press the [Pointer] button, the pointer appears or
disappears.
Each time you press the [Freeze] button, Freeze turns on or off.
Remote control
Remote control
Projection Functions
92
Start E-Zoom.
Move the Pointer icon (
).
a
b
b
Press the [z] button to display the Cross (
Remote control
).
Remote control
When any pair of adjacent [
], [
], [ ], or [ ] buttons are
pressed at the same time, the pointer can be moved diagonally.
Move the Cross (
enlarge.
) to the area of the image that you want to
You can select the shape of the pointer icon from the
Remote control
Configuration menu.
a
s Settings - Pointer Shape p.119
Enlarging Part of the Image (E-Zoom)
This is useful when you want to expand images to see them in greater
detail, such as graphs and tables.
When any pair of adjacent [
], [
], [ ], or [ ] buttons are
pressed at the same time, the pointer can be moved diagonally.
Projection Functions
93
Enlarge.
Windows
OS X
c
Remote control
Windows 2000
Windows XP
Windows Vista
Windows 7
Windows 8
Windows 8.1
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
OS X 10.7.x
OS
[z] button: Expands the area each time
it ispressed. You can expand quickly by
holding the button down.
[x] button: Reduces images that have
been enlarged.
OS X 10.8.x
OS X 10.9.x
[Esc] button: Cancels E-Zoom.
*
It may not be possible to use the Wireless Mouse function under some
versions of the operating systems.
Use the following procedure to enable the Wireless Mouse function.
a • The enlargement ratio appears on the screen. The selected
area can be enlarged to between 1 to 4 times in 25
incremental steps.
Set USB Type B to Wireless Mouse/USB Display from the
a
Configuration menu (EB-536Wi only).
• During enlarged projection, press the [
], [
], [ ], and
s
Extended - USB Type B p.120
[
] buttons to scroll the image.
Connect the projector to the computer with the supplied or a
commercially available USB cable.
b
c
s
"Connecting a Computer" p.26
Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)
Change the source to one of the following.
• USB Display
• Computer1
• Computer2
• HDMI
You can control the computer's mouse pointer from the projector's remote
control. This function is called Wireless Mouse.
The following operating systems are compatible with Wireless Mouse.
s
"Switching to the Target Image Using the Remote Control"
p.44
Projection Functions
94
Once set, the mouse pointer can be controlled as follows.
], [
], [ ], or [ ] buttons are
a • When any pair of adjacent [
Moving the mouse pointer
pressed at the same time, the pointer can be moved diagonally.
[
][
][ ][ ] buttons:
• If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons will also be reversed.
Moves the mouse pointer.
• The Wireless Mouse function does not work under the following
conditions.
- When Extended - USB Type B is set to anything other than
Wireless Mouse/USB Display (EB-536Wi only).
- When displaying the Configuration menu or help.
Mouse clicks
- When operating functions other than the Wireless Mouse function
[Esc] button: Right click.
[Enter] button: Left click. Press quickly
twice to double-click.
(such as adjusting the volume)
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
Drag and drop
While holding down the [Enter] button,
press the [
], [
], [ ], or [
]
button to drag.
Release the [Enter] button to drop at the
desired location.
Page Up/Down
[[] button: Moves to the previous page.
[]] button: Moves to the next page.
Projection Functions
95
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
You can use the registered user's logo as a display when projection starts or
no image signal is being input.
s
Extended - Display p.120
a • Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
• If the content of the Configuration menu is set from another
projector using the batch setup function, the registered User's Logo
is set for the other projectors. Do not register confidential
information and so on as the User's Logo.
a • When User's Logo Protection from Password Protection is
be changed. You can make changes after setting User's Logo
Protection to Off.
s "Performing Batch Setup for Multiple Projectors" p.136
set to On, a message is displayed and the User's Logo cannot
Project the image you want to save as the User's Logo, and then
s "Managing Users (Password Protection)" p.98
a
press the [Menu] button.
"Using the Configuration Menu" p.113
Using the remote control Using the control panel
• If User's Logo is selected when Keystone, E-Zoom, Aspect, or
Adjust Zoom are being performed, the function currently
being performed is temporarily cancelled.
s
When the message "Choose this image as the User's Logo?" is
displayed, select Yes.
c
When you press the [Enter] button on the remote control or
the control panel, the screen size may change depending on the
a
signal to match the actual resolution of the image signal.
Select User's Logo from Extended.
b
Projection Functions
96
Move the box to select the part of the image to use as the User's
Logo.
Select the zoom factor from the zoom setting screen.
d
f
g
You can perform the same operations from the projector's control
panel.
Remote control
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
a You can save at 400 x 300 dots in size.
When a User's Logo is saved, the previous User's Logo is
erased.
a
When you press the [Enter] button and the message "Select this
image?" is displayed, select Yes.
e
Saving User Pattern
There are five types of patterns registered to the projector, such as ruled
lines and grid patterns.
s
Settings - Pattern - Pattern Type p.119
You can also save the image that is currently being projected as a User
Pattern.
a When a User Pattern is saved, the previous User Pattern is erased.
Projection Functions
97
Project the image you want to use as the User Pattern, and then
a
press the [Menu] button.
"Using the Configuration Menu" p.113
Using the remote control Using the control panel
s
Select Pattern from Settings.
b
If User Pattern is selected when Keystone, E-Zoom, Aspect, or
Adjust Zoom is being performed, the function currently being
performed is cancelled.
a
When "Do you want to use the currently projected image as the
User Pattern?" is displayed, select Yes.
d
e
When you press the [ ] button, the message "Do you save this
image as the User Pattern?" is displayed. Select Yes.
The image is saved. After the image has been saved, the message
"The User Pattern setting is complete." is displayed.
Once a User Pattern has been saved, User Pattern cannot be
returned to the factory default.
Select User Pattern.
a
c
98
Security Functions
The projector has the following enhanced security functions.
• User's Logo Protection
Even if someone tries to change the User's Logo set by the owner of the
projector, it cannot be changed. When User's Logo Protection is set to
On, the following setting changes for the User's Logo are prohibited.
• Password Protection
You can limit who can use the projector.
• Control Panel Lock
• Capturing a User's Logo
You can prevent people changing the settings on the projector without
• Setting Display Background, Startup Screen, or A/V Mute from
permission.
Display
s
"Restricting Operation (Control Panel Lock)" p.100
s
Extended - Display p.120
• Anti-Theft Lock
• Network Protection
The projector is equipped with the following anti-theft security device.
When Network Protection is set to On, changing the settings for
Network is prohibited.
s
"Anti-Theft Lock" p.101
s
"Network Menu" p.124
Managing Users (Password Protection)
Setting Password Protection
When Password Protection is activated, people who do not know the
password cannot use the projector to project images even if the projector
power is on. Furthermore, the user's logo that is displayed when you turn
on the projector cannot be changed. This acts as an anti-theft device as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protection is not activated.
Use the following procedure to set Password Protection.
During projection, hold down the [Freeze] button for about five
seconds.
a
The Password Protection setting menu is displayed.
Remote control
Kinds of Password Protection
The following three kinds of Password Protection settings can be made
according to how the projector is being used.
• Power On Protection
When Power On Protection is On, you need to enter a preset password
after the projector is plugged in and turned on (this also applies to Direct
Power On). When the correct password is entered, projection starts.
Security Functions
99
Remote control
a • If Password Protection is already activated, you must enter
If the password is entered correctly, the Password Protection
setting menu is displayed.
the password.
s "Entering the Password" p.99
• When the password is set, stick the supplied password protect
sticker in a visible position on the projector as a further theft
deterrent.
Select the type of Password Protection you want to set, and then
press the [Enter] button.
(4)
Re-enter the password.
The message "Password accepted." is displayed.
If you enter the password incorrectly, a message is displayed prompting
you to re-enter the password.
b
Entering the Password
When the password entry screen is displayed, enter the password using the
remote control.
While holding down the [Num] button, enter the password by pressing the
numeric buttons.
Select On, and then press the [Enter] button.
c
d
Press the [Esc] button, the screen displayed in step 2 is displayed
again.
Set the password.
(1)
(2)
Select Password, and then press the [Enter] button.
When the message "Change the password?" is displayed, select Yes and
then press the [Enter] button. The default password is set to "0000".
Change this to your own desired Password. If you select No, the screen
displayed in step 2 is displayed again.
When you enter the correct password, Password Protection is temporarily
released.
(3)
While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "* * * *". When
you enter the fourth digit, the confirmation screen is displayed.
Security Functions
100
Press the [Menu] button while projecting.
Attention
a
b
s
"Using the Configuration Menu" p.113
Using the remote control Using the control panel
• If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately five
minutes, and then the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet and then reinsert it and
turn the projector's power back on. The projector displays the password entry
screen again so that you can enter the correct password.
• If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact the nearest address
provided in the Epson Projector Contact List.
s Epson Projector Contact List
• If you continue to repeat the above operation and input the wrong Password
30 times in succession, the following message is displayed and the projector
does not accept any more Password entries. "The projector's operation will be
locked. Contact Epson as described in your documentation."
Select Control Panel Lock from Settings.
s Epson Projector Contact List
Restricting Operation (Control Panel Lock)
Do one of the following to lock the operation buttons on the control
panel.
• Full Lock
All of the buttons on the control panel are locked. You cannot perform
any operations from the control panel, including turning the power on or
off.
Select either Full Lock or Partial Lock according to your purpose.
c
• Partial Lock
All of the buttons on the control panel, except for the [t] power button,
are locked.
This is useful at events or shows when you want to deactivate all buttons
during projection or at schools when you want to limit button operation.
The projector can still be operated using the remote control.
Security Functions
101
Select Yes when the confirmation message is displayed.
Anti-Theft Lock
d
The control panel buttons are locked according to the setting you
chose.
The projector is equipped with the following types of anti-theft security
devices.
You can release the control panel lock by one of the following
• Security slot
two methods.
a
The security slot is compatible with the Microsaver Security System
• Select Off from Control Panel Lock.
s Settings - Control Panel Lock p.119
manufactured by Kensington.
See the following for more details on the Microsaver Security System.
• Press and hold down the [Enter] button on the control panel
for about seven seconds, a message is displayed and the lock
is released.
s
http://www.kensington.com/
• Security cable installation point
A commercially available theft-prevention wire lock can be passed
through the installation point to secure the projector to a desk or pillar.
Do not pass drop-prevention wires through here when mounting the
projector on a wall or suspending it from a ceiling.
Installing the Wire Lock
Pass an anti-theft wire lock through the installation point.
See the documentation supplied with the wire lock for locking instructions.
102
Monitoring and Controlling
This function allows you to perform setup and control operations remotely.
In addition, since you can use the computer's keyboard, entering characters
required for the setup is easier.
About EasyMP Monitor
EasyMP Monitor lets you carry out operations such as checking the status
of multiple Epson projectors that are connected to a network at a computer
monitor, and controlling the projectors from the computer.
Use Microsoft Internet Explorer 8.0 or later as the Web browser. Use Safari
for OS X.
You can download EasyMP Monitor from the following Web site.
http://www.epson.com
If you set Standby Mode to Communication On, you can use the
Web browser to make settings and perform control even if the
a
projector is in standby mode (when the power is off).
The following provides descriptions of the monitoring and control functions
that can be carried out using EasyMP Monitor.
s ECO - Standby Mode p.133
• Registering projectors for monitoring and control
• Group registration for registered projectors
• Monitoring the status of registered projectors
• Controlling registered projectors
Projector Setup
In a Web browser, you can set items that are usually set in the projector's
Configuration menu. The settings are reflected in the Configuration menu.
There are also items that can only be set in the Web browser.
• Mail Notification settings
• Sending messages to registered projectors
Items in the Configuration menu that cannot be set by the Web browser
Message Broadcasting
• Settings menu - Pointer Shape
• Settings menu - Pattern (except Pattern Type)
• Settings menu - User Button
• Extended menu - User's Logo
• Extended menu - USB Type B
• Extended menu - Easy Interactive Function
• Extended menu - Language
Message Broadcasting is plugin software for EasyMP Monitor. Message
Broadcasting can be used to send a message (JPEG file) to project on all
Epson projectors or specified projectors connected on the network.
The data can be sent manually, or sent automatically using Timer Settings
of EasyMP Monitor.
Download the Message Broadcasting software from the following Web site.
http://www.epson.com
• Reset menu - Reset All and Reset Lamp Hours
The settings for items on each menu are the same as the projector's
Configuration menu.
Changing Settings Using a Web Browser (Web
Control)
s
"Configuration Menu" p.112
Items that can Only Be Set with a Web Browser
By using a Web browser of a computer connected to the projector on a
network, you can set the projector's functions and control the projector.
• SNMP Community Name (up to 32 single-byte alphanumeric characters)
Monitoring and Controlling
103
• Monitor Password (up to 16 single-byte alphanumeric characters)
a • Enter the user ID even if the password setting is disabled.
You cannot change the user ID.
• You can change the password on the Network menu from the
Configuration menu.
Displaying the Web Control Screen
s Network - Basic - Web Control Password p.124
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network. Use
Advanced when connecting via a Wireless LAN.
Displaying the Web Remote screen
If your Web browser is set up to connect via a proxy server, the Web
The Web Remote function allows you to perform projector remote control
operations with a Web browser.
Control screen cannot be displayed. To display Web Control, you need
a
to make settings so that a proxy server is not used for a connection.
Display the Web Control screen.
a
b
Start a Web browser on the computer.
a
b
Click Web Remote.
Enter the IP address of the projector in the address input box of
the Web browser, and press the Enter key on the computer's
keyboard.
The Web Control screen is displayed.
When Web Control Password is set from the Configuration menu,
the password entry screen is displayed.
The Web Remote screen is displayed.
Enter the User ID and Password, and then press the Enter key on
your computer's keyboard.
c
c
The User ID is "EPSONWEB".
The default password is "admin".
When the correct user ID and password are entered, the Web
control screen is displayed.
Monitoring and Controlling
104
Name
Function
Changes pagesin files such as PowerPointfiles whenusing
the following projection methods.
[Page] buttons
[Up] [Down]
F
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.93
• When using USB Display
s "Projecting with USB Display" p.45
• When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next screen.
Switches to the image from the input port where video
signals are being input.
[Source Search]
button
G
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
Name
Function
Switches to the image from the network connected device.
s "Switching to the Target Image Using the Remote
Control" p.44
[LAN] button
[USB] button
Turns the projector power on or off.
s "Turning On the Projector" p.41
H
I
[Power] button
[t]
A
B
Each time the button is pressed, it cycles through the
following images:
• Computer1 port
• Computer2 port
[Computer] button
Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB-A port
s "Switching to the Target Image Using the Remote
Control" p.44
Each time the button is pressed, it cycles through the
images being input from the following sources.
• S-Video port
• Video port
• HDMI port
[Video] button
C
[a] Decreases the volume.
[b] Increases the volume.
s "Adjusting the Volume" p.53
[Volume] button
[a][b]
J
Pauses or resumes image playback.
s "Freezing the Image (Freeze)" p.91
[Freeze] button
D
E
Turns the video and audio on or off.
[A/V Mute] button
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.90
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
Monitoring and Controlling
105
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
• Lamp timer failure
• Lamp out
s
Network - Mail - Mail Notification p.131
• Internal temperature error
• High-speed cooling in progress
• Lamp replacement notification
• No-signal
a • Up to three notification destinations (addresses) can be registered,
and notification messages can be sent to all three destinations at
once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
No Signal is input to the projector. Check the connection status or check
that the power for the signal source is turned on.
• Controlling is possible if Standby Mode is set to Communication
On, even if the projector is in standby state (when the power is
off).
• Auto Iris Error
• Power Err. (Ballast)
s ECO - Standby Mode p.133
See the following to deal with problems or warnings.
s
"Reading the Indicators" p.143
Reading Error Notification Mail
When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Management Using SNMP
Sender: Email Address 1
By setting SNMP to On in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
Email title: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has occurred
Line 3 and on: Details of the problem
s
Network - Others - SNMP p.132
The details of the problem are listed line by line. The main message
contents are listed below.
• Internal error
• Fan related error
• Sensor error
Monitoring and Controlling
106
Item
Command
a • SNMP should be managed by a network administrator or someone
who is familiar with the network.
• To use the SNMP function to monitor the projector, you need to
install the SNMP manager program on your computer.
• The SNMP Agent for this projector complies with version 1
(SNMPv1).
• The managing function using SNMP cannot be used via wireless
LAN in Quick mode.
Computer2
Auto
SOURCE 2F
SOURCE 21
SOURCE 24
SOURCE 30
SOURCE 41
SOURCE 42
SOURCE 51
SOURCE 52
SOURCE 53
MUTE ON
MUTE OFF
RGB
Component
HDMI
Video
S-Video
USB Display
USB
• Up to two destination IP addresses can be saved.
LAN
ESC/VP21 Commands
A/V Mute ON/OFF On
Off
You can control the projector from an external device using ESC/VP21.
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Command list
For more details, contact your local dealer or the nearest address provided
in the Epson Projector Contact List.
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
s
Epson Projector Contact List
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
Cable Layouts
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
Serial Connection
The main contents are listed below.
• Connector shape: D-Sub 9-pin (male)
Item
Command
PWR ON
Power ON/OFF
Signal selection
On
Off
PWR OFF
Computer1
Auto
SOURCE 1F
SOURCE 11
SOURCE 14
RGB
Component
Monitoring and Controlling
107
• Projector input port name: RS-232C
About PJLink
<At the projector>
<At the computer>
PJLink Class1 was established by the JBMIA (Japan Business Machine and
Information System Industries Association) as a standard protocol for
controlling network-compatible projector's as part of their efforts to
standardize projector control protocols.
The projector complies with the PJLink Class1 standard established by the
JBMIA.
You need to make network settings before you can use PJLink. See the
following for more information on network settings.
s
"Network Menu" p.124
It complies with all commands except for the following commands defined
by PJLink Class1, and agreement was confirmed by the PJLink standard
adaptability verification.
<At the projector>
(PC serial cable)
<At the computer>
URL:http://pjlink.jbmia.or.jp/english/
• Non-compatible commands
Function
PJLink Command
AVMT 11
Signal Name
Function
Signal wire ground
Transmit data
Receive data
Mute settings
Image muting set
Audio muting set
GND
TD
AVMT 21
RD
• Input names defined by PJLink and corresponding projector sources
Source PJLink Command
Communications protocol
Computer1
Computer2
Video
INPT 11
INPT 12
INPT 21
INPT 22
INPT 32
INPT 41
• Default baud rate setting: 9600 bps
• Data length: 8 bit
• Parity: None
• Stop-bit: 1 bit
• Flow control: None
S-Video
HDMI
USB
Monitoring and Controlling
108
• Monitoring and control with application software
Source
PJLink Command
You can use Crestron RoomView Express or Crestron RoomView
LAN
INPT 52
INPT 53
®
®
Server Edition provided by Crestron to monitor devices in the system,
®
USB Display
to communicate with the help desk, and to send emergency messages. See
the following Web site for details.
http://www.crestron.com/getroomview
• Manufacturer name displayed for "Manufacture name information query"
EPSON
This manual describes how to perform operations on your computer using
a Web browser.
• Model name displayed for "Product name information query"
EPSON 536
EPSON 535
EPSON 525
EPSON 530
EPSON 520
• You can only enter single-byte alphanumeric characters and symbols.
a
• The following functions cannot be used while using Crestron
RoomView .
®
s "Changing Settings Using a Web Browser (Web Control)"
p.102
Message Broadcasting (EasyMP Monitor plug-in)
• Controlling is possible if Standby Mode is set to Communication
On, even if the projector is in standby state (when the power is
off).
About Crestron RoomView
®
Crestron RoomView is an integrated control system provided by
®
s ECO - Standby Mode p.133
Crestron . It can be used to monitor and control multiple devices
®
connected on a network.
The projector supports the control protocol, and can therefore be used in a
system built with Crestron RoomView .
Operating a Projector from Your Computer
®
Visit the Crestron Web site for details on Crestron RoomView . (Only
®
®
Displaying the Operation Window
English-language displays are supported.)
http://www.crestron.com
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
When communicating with a wireless LAN, connect in Advanced
connection mode.
The following provides an overview of Crestron RoomView .
®
• Remote operation using a Web browser
You can operate a projector from your computer just like using a remote
control.
s
"Wireless LAN Menu" p.127
• Set Crestron RoomView to On from the Network menu.
Network - Others - Crestron RoomView p.132
s
Monitoring and Controlling
109
Start a Web browser on the computer.
Button
A/V Mute
Function
a
b
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Enter the IP address of the projector in the address field of the
Web browser, and press the Enter key on the keyboard.
Mute)" p.90
The operation window is displayed.
Switch to the image from the selected input source. To display input sources that
arenotshownonthe screen, click(a)or (b)toscroll up ordown. Thecurrent video
signal input source is displayed in blue.
B
C
Using the Operation Window
You can change the source name if necessary.
You can perform the following operations when you click the buttons. To display
buttons that are not shown on the screen, click (c) or (d) to scroll left or right.
Button
Function
Freeze
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.91
Contrast
You can adjust the difference between light and dark in
the images.
Brightness
Color
You can adjust the image brightness.
You can adjust the color saturation for the images.
You can adjust the image sharpness.
Sharpness
Zoom
Click the [z] button to enlarge the image without
changing the projection size. Click the [x] button to
reduce an image that was enlarged with the [z] button.
Click the [ ], [ ], [ ], or [ ] button to change the
position of an enlarged image.
You can perform the following operations when you click the buttons.
A
Button
Function
Turns the projector power on or off.
Adjusts the volume.
Power
Vol-/Vol+
s "Enlarging Part of the Image (E-Zoom)" p.92
D
The[ ], [ ], [ ], and[ ]buttonsperformthesameoperationsasthe[
], [ ], and [ ] buttons on the remote control. You can perform the
following operations when you click the other buttons.
],
[
Monitoring and Controlling
110
Button
Function
OK
Performs the same operation as the [Enter] button on
the remote control.
s "Remote Control" p.16
Menu
Auto
Displays and closes the Configuration menu.
If clicked while projecting analog RGB signals from
Computer1 port or Computer2 port, automatically
optimizes the image by adjusting the Tracking, Sync.,
and Position.
Search
Esc
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.43
Performs the same operation as the [Esc] button on the
remote control.
s "Remote Control" p.16
Crestron Control
A
B
Make settings for Crestron central controllers.
®
Projector
The following items can be set.
You can perform the following operations when you click the tabs.
E
Tab
Function
Item
Function
Contact IT Help
Displays the Help Desk window. Used to send messages
to, and receive messages from, the administrator using
Projector Name
Enter a name to differentiate the projector that is
currently connected from other projectors on the
Crestron RoomView Express.
network. (The name can contain up to 15 single-byte
alphanumeric characters.)
®
Info
Displays information on the projector that is currently
connected.
Location
Enter an installation location name for the projector
that is currently connected on the network. (The name
can contain up to 32 single-byte alphanumeric
characters and symbols.)
Tools
Changes settings in the projector that is currently
connected. See the next section.
Assigned To
Enter a user name for the projector. (The name can
contain up to 32 single-byte alphanumeric characters
and symbols.)
Using the Tools Window
The following window is displayed when you click the Tools tab on the
operation window. You can use this window to change settings in the
projector that is currently connected.
Monitoring and Controlling
111
Item
Function
Item
Function
DHCP
Select the Enabled check box to use DHCP. You cannot
New Password
Enter the new password when changing the password to
open the operation window. (Up to 26 single-byte
alphanumerical characters)
enter an IP address if DHCP is enabled.
IP Address
Subnet Mask
Default Gateway
Send
Enter the IP address to assign to the currently connected
projector.
Confirm
Send
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
Enter a subnet mask for the currently connected
projector.
Click this button to confirm the changes made to the
User Password.
Enter the gateway address for the currently connected
projector.
Click this button to confirm the changes made to the
Projector.
Admin Password
C
Select the Enabled check box to require a password to open the Tools window.
The following items can be set.
Item
Function
New Password
Confirm
Send
Enter the new password when changing the password to
open the Tools window. (The name can contain up to 26
single-byte alphanumeric characters.)
Enter the same password as you entered in New
Password. If the passwords are not the same, an error is
displayed.
Click this button to confirm the changes made to the
Admin Password.
User Password
D
Select the Enabled check box to require a password to open the operation window
on the computer.
The following items can be set.
Configuration Menu
This chapter explains how to use the Configuration menu and its functions.
113
Using the Configuration Menu
This section explains how to use the Configuration menu.
Select a submenu item.
c
d
e
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.
Display the Configuration menu screen.
a
Change settings.
Select a top menu item.
b
Press the [Menu] button to finish making settings.
114
List of Functions
Top Menu Name
Submenu Name
Aspect
Items or Setting Values
Configuration Menu Table
Normal, Auto, 4:3, 16:9, Full,
Zoom, and Native
Settable items vary depending on the model being used and the image
signal and source being projected.
Overscan
Auto, Off, 4%, and 8%
Fine, Fast
Top Menu Name
Submenu Name
Items or Setting Values
Image Processing
Keystone
Image menu
Color Mode
Dynamic, Presentation, Theatre,
sRGB, Blackboard
Settings menu
s p.119
H/V-Keystone and Quick Corner
0 (Wide) to 40 (Tele)
Full Lock, Partial Lock, and Off
Pointer 1, Pointer 2, Pointer 3
0 to 20
s p.116
Zoom
Brightness
-24 to 24
Control Panel Lock
Pointer Shape
Volume
Contrast
-24 to 24
Color Saturation
Tint
-32 to 32
-32 to 32
Mic Input Level
Remote Receiver
User Button
0 to 5
Sharpness
-5 to 5
Front/Rear, Front, Rear, and Off
Color Temp.
Color Adjustment
5000K to 10000K, -3 to 6
Power Consumption, Info,
Progressive, Test Pattern,
Resolution, Mic Input Level,
Pattern Display, Auto
Red: -16 to 16
Green: -16 to 16
Blue: -16 to 16
Calibration, Flip Horizontal
Auto Iris
Off, Normal, High Speed
On and Off
Pattern
Pattern Display, Pattern Type,
User Pattern, and Test Pattern
Signal menu
s p.117
Auto Setup
Resolution
Auto, Wide, and Normal
-
Extended menu
s p.120
Easy Interactive Func- Items in General
tion
Tracking
Auto Calibration, Manual
Calibration, Pen Mode,
Hovering, Advanced
Items in PC Interactive
Pen Operation Mode, Enable
Right Click, Advanced
Sync.
-
Position
Up, Down, Left, and Right
Off, Video, and Film/Auto
Off, NR1, and NR2
Auto, Normal, and Expanded
Auto, RGB, and Component
Progressive
Noise Reduction
HDMI Video Range
Input Signal
Video Signal
Display
Messages, Display Background,
Startup Screen, A/V Mute,
Toolbars, Pen Mode Icon,
Projector Control
Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, and
SECAM
User's Logo
-
List of Functions
115
Network menu
Top Menu Name
Submenu Name
Items or Setting Values
Projection
Front, Front/Ceiling, Rear, and
Rear/Ceiling
Top Menu Name
Submenu Name
Projector Name
PJLink Password
Web Control Password
Projector Keyword
Connection Mode
Channel
Items or Setting Values
Basic menu
s p.126
-
-
-
Operation
Direct Power On, High Altitude
Mode, Startup Source Search,
Auto Power On
A/V Settings
USB Type B
A/V Output, Audio Output,
HDMI Audio Output
On and Off
Wireless LAN menu
s p.127
Quick, Advanced
Easy Interactive Function, USB
Display/Easy Interactive
Function, Wireless Mouse/USB
Display
1ch, 6ch, 11ch
SSID Auto Setting
SSID
On and Off
-
-
*
Language
15 or 35 languages
Search Access Point
IP Settings
ECO menu
s p.133
Power Consumption
Light Optimizer
Sleep Mode
Normal and ECO
On and Off
On and Off
1 to 30
DHCP, IP Address, Subnet Mask,
and Gateway Address
SSID Display
IP Address Display
Security
On and Off
On and Off
Sleep Mode Timer
A/V Mute Timer
Standby Mode
On and Off
Security menu
s p.129
Off, WPA2-PSK, and
WPA/WPA2-PSK
Communication On and
Communication Off
Passphrase
IP Settings
-
ECO Display
Projector Info
On and Off
Wired LAN menu
s p.130
DHCP, IP Address, Subnet Mask,
and Gateway Address
Info menu
s p.134
Lamp Hours, Source, Input
Signal, Resolution, Video Signal,
Refresh Rate, Sync Info, Status,
Serial Number, Event ID
IP Address Display
Mail Notification
SMTP Server
On and Off
Mail menu
s p.131
On and Off
-
-
-
Version
Main, Video
Port Number
Reset menu
s p.135
Reset All
-
-
Address 1 Setting, Ad-
dress 2 Setting, and Ad-
dress 3 Setting
Reset Lamp Hours
*
The number of supported languages differs depending on the region where the
projector is used.
Others menu
SNMP
On and Off
s p.132
List of Functions
116
s
"Automatically Detect Input Signals and Change the Projected Image
Top Menu Name
Submenu Name
Items or Setting Values
(Source Search)" p.43
Trap IP Address 1 and
Trap IP Address 2
-
Priority Gateway
Wired LAN and Wireless LAN
AMX Device Discovery On and Off
Crestron RoomView
Bonjour
On and Off
On and Off
On and Off
Message Broadcasting
Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
Submenu
Function
You can select the quality of the image to suit your surroundings.
Color Mode
s "Selecting the Projection Quality (Selecting Color Mode)"
p.53
You can adjust the image brightness.
Brightness
Contrast
You can adjust the difference between light and dark in the
images.
(Adjustment is only possible when component video or
composite video images are being input.)
You can adjust the color saturation for the images.
Color Saturation
Tint
(Adjustment is possible when a component video signals are
being input. Composite video and S-video input signals can only
be adjusted when they are NTSC video signals.)
You can adjust the image tint.
You can adjust the image sharpness.
Sharpness
List of Functions
117
Submenu
Function
Signal Menu
You can adjust the overall tint of the image. The image is tinted
blue when a high value is selected and tinted red when a low value
is selected. Values that can be adjusted depend on the Color
Mode settings.
For sRGBg: From 5000K to 10000K in 10 steps
For other settings: From -3 to 6 in 10 steps
Color Temp.
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
You cannot make settings on the Signal menu when the source is USB
Display, USB, or LAN.
s
"Automatically Detect Input Signals and Change the Projected Image
(This item cannot be selected if Color Mode is set to sRGBg.)
You can adjust the color strength for Red, Green, and Blue
Color Adjust
ment
(Source Search)" p.43
individually.
(This item can be set only if Color Mode is set to Dynamic or
Theatre.)
Auto Iris
Set to Normal or High Speed to adjust the iris to obtain the
optimum light for images being projected. Select High Speed to
make faster iris corrections to match the speed of the scene.
The setting is stored for each Color Mode.
s "Setting Auto Iris" p.54
You can reset all adjustment values for the Image menu to their
default settings. See the following to return all menu items to
their default settings.
Reset
s "Reset Menu" p.135
Submenu
Function
(Only available when analog RGB computer signals are being
input.)
Auto Setup
Set toOn to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
(Only available when analog RGB computer signals are being
input.)
Resolution
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, adjust to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
List of Functions
118
Submenu
Tracking
Function
Submenu
Function
(Only available when analog RGB computer signals are being
input.)
You can adjust computer images when vertical stripes appear in
You can select the input signal from the S-Video port or the
Video port. If set to Auto, video signals are recognized
automatically. If interference appears in the image or a problem
occurs such as no image is being projected when set to Auto,
select the appropriate signal according to the connected
equipment.
Video Signal
the images.
(Only available when analog RGB computer signals are being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Sync.
You can set the aspect ratio
g
for projected images.
Aspect
s "Changing the Aspect Ratio of the Projected Image" p.55
(This setting can only be adjusted when a component video
signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. You
can select Auto when the source is HDMI. If you set to Auto, this
setting is changed automatically depending on the source.
Overscan
(This item cannot be set when the source is HDMI.)
You canadjust the display positionup, down, left, andrightwhen
a part of the image is missing so that the whole image is projected.
Position
Interlace
g
(i) signal is converted to Progressive
g
(p). (IP
Progressive
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics, and
animation.
(This item cannot be selected if Easy Interactive Function is set
to PC Interactive)
When Fine is selected, priority is given to image quality, and the
image is projected.
When Fast is selected, priority is given to processing speed, and
the image is projected.
This improves the pen's tracking ability when using the
interactive features (EB-536Wi only).
Image Process
ing
(This item cannot be set when Image Processing is set to Fast.)
Noise Reduction
Smoothes out rough images converted using progressive. There
are two modes. Select your favorite setting. It is recommended
that this is set to Off when viewing image sources in which noise
is very low, such as for DVDs.
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal and Image Processing.
See the following to return all menu items to their default
settings.
Reset
When the projector's HDMI port is connected to a DVD player,
set the projector's video range according to the DVD player's
video range setting. If you are worried about floating black spots
or washed out parts in the image, set to Expanded.
HDMI Video
Range
s "Reset Menu" p.135
You can select the input signal from the Computer1 port or the
Computer2 port.
Input Signal
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
List of Functions
Settings Menu
119
Submenu
Function
You can select the shape of the pointer.
Pointer 1:
Pointer Shape
Pointer 2:
Pointer 3:
s "Pointer Function (Pointer)" p.91
You can adjust the volume. Setting values are saved for each
source.
Volume
Adjusts the volume from the microphone. When the Mic Input
Level is turned down to 0, no audio is output from the speaker.
Mic Input Level
When the microphone input level is raised, the audio from the
connected device becomes quieter. When the microphone
input level is lowered, the audio from the connected device
becomes louder.
Submenu
Keystone
Function
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, holddownthe [Menu] buttonon the remotecontrol for
at least 15 seconds to reset the setting to its default value.
Remote Receiver
User Button
You can correct keystone distortion.
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off (EB-536Wi only).
s "H/V-Keystone" p.49
s "Auto V-Keystone" p.52
s "H-Keystone Adjuster (EB-536Wi only)" p.51
You can select the item in the Configuration menu to be
assigned to the [User] button on the remote control. By pressing
the [User] button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch settings/
adjustments. You can assign one of the following items to
the [User] button.
Power Consumption, Info, Progressive, Test Pattern,
Resolution, Mic Input Level, Pattern Display, Auto
Calibration (EB-536Wi only), Flip Horizontal
• When Quick Corner is selected:
Select and correct the four corners of the projected
image.
s "Quick Corner" p.49
Adjusts the projected image size.
Zoom
You can use this to restrict operation of the projector's control
panel.
Control Panel
Lock
s "Restricting Operation (Control Panel Lock)" p.100
List of Functions
120
Submenu
Pattern
Function
Submenu
Reset
Function
Pattern Display: Display a pattern.
You can reset all adjustment values in the Settings menu to their
default settings, except for Zoom and User Button.
See the following to return all menu items to their default
Pattern Type: You can select from Patterns 1 to 5 or User
Pattern. Patterns 1 to 4 display projection lines such as ruled
lines or a grid. Pattern 5 displays a test pattern for 4:3 screens.
When adjusting the focus for an image projected on a screen
with an aspect ratio of 4:3 using EB-536Wi/EB-535W/
EB-525W, select Pattern 5.
settings.
s "Reset Menu" p.135
Pattern 1:
Pattern 3:
Pattern 5:
Pattern 2:
Extended Menu
Pattern 4:
User Pattern: Captures a user pattern.
s "Saving User Pattern" p.96
Test Pattern: Displays a test pattern to adjust the projected
status without connecting a device. While the test pattern is
displayed, zoom, focus adjustments, and keystone correction
can be performed. To cancel the test pattern, press the [Esc]
button on the remote control or the control panel.
Submenu
Function
Whendisplayingatestpatternonascreen withanaspectratioof
4:3 using EB-536Wi/EB-535W/EB-525W, set Pattern Type to
Pattern 5, and then select Pattern Display.
Allows you to use and set the interactive features.
s "Using the Interactive Features (EB-536Wi only)" p.58
See the following table for more details.
Easy Interactive
Function
(EB-536Wi only)
s "Easy Interactive Function Setting Items (EB-536Wi
only)" p.123
Attention
If a pattern is displayed for a long time, a residual
image may be visible in projected images.
List of Functions
121
Submenu
Display
Function
Submenu
Projection
Function
You can make settings related to the projector's display.
Messages: When set to Off, the following items will not be
Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
displayed.
Item names when the Source, Color Mode, or Aspect Ratio
is changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background : You can set the screen status for
when no image signal is available to Black, Blue, or
You can change the Projection mode as follows by pressing
down the [A/V Mute] button on the remote control for
about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
*1
Logo.
s "Installation Methods" p.23
*1
Startup Screen : Set to On to display the User's Logo
when projection starts.
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m or higher.
Startup Source Search: Set to Off to project images from
the same source as the last time the projector was used.
Auto Power On: (Only available when Standby Mode is set
to Communication On.) If this is set to Computer1, the
projector turns on when signals are received from the
Computer1 port, even when the projector is in standby
mode. The default value is Off.
Operation
*1
A/V Mute : You can set the screen displayed when the
remote control's [A/V Mute] button is pressed to Black,
Blue, or Logo.
Toolbars (EB-536Wi only): Set whether or not the drawing
toolbar tab is always displayed when using the interactive
features. The default is Hide for Set Time.
Pen Mode Icon (EB-536Wi only): Set whether or not to
always display the icon to change the pen mode when using
the interactive features. The icon is hidden when set to
Off.
Projector Control (EB-536Wi only): Set the display position
for the projector control toolbars when using the interactive
features. The default value is Bottom. The icon is hidden
when set to Off.
User's Logo*1
You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo" p.95
List of Functions
122
Submenu
Function
Submenu
Function
A/V Output: (Only available when Standby Mode is set to
Easy Interactive Function: Allows you to use the interactive
features to operate computers (computer interactive mode).
USB Display and Wireless Mouse functions are not
available.
A/V Settings
USB Type B
(EB-536Wi only)
Communication On.)
To perform the following functions when the projector is in
standby, set to Always On.
USB Display/Easy Interactive Function: Allows you to use
the interactive features to operate computers (computer
interactive mode) and USB Display. The Wireless Mouse
function is not available.
• Outputting audio and images to external devices.
• Outputting microphone audio from the projector's
speaker.
Although the fan may rotate in standby
mode, this is not an abnormality.
Wireless Mouse/USB Display: Allows you to use the
Wireless Mouse function and USB Display. You cannot use
the interactive features to operate computers (computer
interactive mode).
a
Audio Output: Set the audio input port when projecting
images from the Computer1, Computer2, S-Video, Video,
and USB-A ports. When set to Audio1, Audio2, or Audio
(L/R), audio is output from the selected port regardless of
the source.
HDMI Audio Output: Set the input audio when projecting
images from the HDMI port. When set to Audio1, Audio2,
or Audio (L/R), audio is output from the selected audio
input port
s "Projecting with USB Display" p.45
s "Controlling a Computer from the Projected Screen
(Computer Interactive Mode)" p.62
s "Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)" p.93
Allows you to set the language for messages and menus.
Language
Reset
*1
You can reset the adjustment values for Display ,
*2
*3
Operation , and A/V Settings from the Extended menu
to their default settings. See the following to return all menu
items to their default settings.
s "Reset Menu" p.135
*1 Except for Toolbars, Pen Mode Icon, and Projector Control. Except for
Display Background, Startup Screen, and User's Logo when User's Logo
Protection is set to On.
s "Managing Users (Password Protection)" p.98
*2 Except for High Altitude Mode and Startup Source Search.
*3 Except for A/V Output.
List of Functions
123
Easy Interactive Function Setting Items (EB-536Wi only)
Submenu
Advanced
Function
• Distance of Projectors: When using multiple projectors in the
same room, adjust the interactive pen operations according to
the distance between the projectors. If interactive pen
operations are unstable, try another mode. The standard
distance set for Mode 1 is 2 m.
General
Submenu
Function
Starts auto calibration.
Auto Calibration
• Sync of Projectors: When using multiple projectors in the
same room, select the method for controlling the interactive
pen interference. When set to Infrared (default), only infrared
is used to synchronize. Set to Wired when connecting the
projectors using cables.
s "Connecting Multiple Projectors (EB-536Wi only)"
p.38
• Wired Sync Mode: When set to Mode 1 (default), only cable
connections are used to synchronize. When set to Mode 2, and
Sync of Projectors is set to Wired, infrared synchronization is
also performed at the same time. Set to Mode 2 when using in
the same room as projectors that do not support cable
connections.
Starts manual calibration.
Manual Calibra
tion
(This can only be set when projecting images from a computer.)
Pen Mode
Hovering
Changes the function for the interactive pen. When set to PC
Free Annotation (default), you can draw on the projected
screen. When set to PC Interactive, you can operate a computer
from the projected screen. You can change the interactive pen
function with the [Pen Mode] button on the remote control, or
the pen mode icon on the projected screen.
When set to On (default), the pointer follows the pen tip as you
hover it over the screen and move it around.
• Confirm Clear Screen: When set to On (default), a
confirmation screen is displayed before clearing all of the
content drawn on the projected screen.
• Color Palette: When set to Palette 2, it changes to a color
palette suitable for people who are color blind. Try Palette 2 if
you find it hard to see the default color palette.
List of Functions
124
PC Interactive
s
"Setting Password Protection" p.98
Set when you want to operate a computer from the projected screen.
Submenu
Function
Set the operation mode and the number of users for the
interactive pen.
Pen Operation
Mode
Two Users/Mouse (default)/One User/Mouse: Allows you to
perform mouse operations using the interactive pen.
One User/Pen: The pen input and Ink features are available in
Windows 8.1, Windows 8, Windows 7, and Windows Vista.
(Only available when Pen Operation Mode is set to Two
Users/Mouse or One User/Mouse.)
Enable Right
Click
When this is set to On, a long press of the pen tip acts as a right
click.
• Pen Tip Button: Allows you to set operations for the pen tip of
the interactive pen. The default setting is Left Click.
• Auto Adjust Pen Area: When this is set to On (default), the
pen area is automatically adjusted as the resolution for the
connected computer changes. Set to Off if you do not want to
automatically adjust the pen area that has been manually
adjusted.
Advanced
Submenu
Function
Set to Wireless LAN On when connecting the projector to
the computer over wireless LAN.
If you do not want to connect via wireless LAN, turn it Off
to prevent unauthorized access by others. The default value
is Wireless LAN On.
Wireless Mode
• Manual Adj. Pen Area: Adjusts the pen area manually.
Displays the following network setting status information.
Net. Info. - Wire
less LAN
• Connection Mode
• Wireless LAN Sys.
• Antenna Level
• Projector Name
• SSID
Network Menu
When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
*
• Region Code
List of Functions
125
Submenu
Function
Displays the following network setting status information.
Net. Info. -
Wired LAN
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
The following menus are available for setting Network
items.
Basic, Wireless LAN, Security, Wired LAN, Mail, Others,
Reset, and Complete
Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Network Config
uration
*
Displays available region information for the Wireless LAN unit being used.
For more details, contact your local dealer or the nearest address provided in
the Epson Projector Contact List.
Soft Keyboard Operations
s Epson Projector Contact List
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed. Use
a • By using a Web browser of a computer connected to the projector
the [
], [
], [ ], and [ ] buttons on the remote control or
on a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
the [w], [v], [Wide], and [Tele] buttons on the control panel to move the
cursor to the key you want, and then press the [Enter] button to enter the
alphanumerical character. Enter figures by holding down the [Num] button
on the remote control, and pressing the numeric buttons. After inputting,
press Finish on the keyboard to confirm your input. Press Cancel on the
keyboard to cancel your input.
s "Changing Settings Using a Web Browser (Web Control)"
p.102
• Contact your network administrator for details on network settings.
Notes on Operating the Network Menu
Selecting from the top menu and sub menus, and changing selected items is
the same as making operations from the Configuration menu.
When done, make sure you go to the Complete menu, and select one of
Yes, No, or Cancel. When you select Yes or No, you are returned to the
Configuration menu.
List of Functions
126
• Each time the CAPS key is selected and the [Enter] button is pressed, it
switches between upper case and lower case.
Basic Menu
• Each time the SYM1/2 key is selected and the [Enter] button is pressed,
it sets and changes the symbol keys for the section enclosed by the
frame.
The following text can be entered.
Numbers
Alphabet
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols
! # $ % & ' ( ) + - . / < = > ? @ ^ _ ` { | } ~
a • Except for the SSID, colons (:) and spaces cannot be entered on the
• Some symbols (" * , ; [ \ ]) cannot be entered using the software
keyboard. Use your Web browser to enter the text.
Network menu.
Submenu
Function
Displays the projector name used to identify the projector when
connected to a network.
Projector Name
s "Changing Settings Using a Web Browser (Web Control)" p.102
When editing, you can enter up to 16 single-byte alphanumeric
characters (The following symbols cannot be used: " *+ , / ; < =
> ?[ ` \ ] |).
Set a password to use when you access the projector using
compatible PJLink software.
PJLink Password
You can enter up to 32 single-byte alphanumeric characters
(symbols cannot be used).
Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to eight single-
byte alphanumeric characters (* cannot be used). The initial
password is "admin".
Web Control
Password
Web Control is a computer function that allows you to set up and
control the projector by using the Web browser on a computer
connected on a Network.
s "Changing Settings Using a Web Browser (Web Control)"
p.102
List of Functions
127
Wireless LAN Menu
Submenu
Function
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Projector Key
word
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
Submenu
Function
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
Connection
Mode
If you select Quick (default), a small network is created
automatically by the projector and computer. Used in
combination with EasyMP Network Projection. When SSID
Auto Setting is set to On, the projector becomes an easy access
point. When set to Off, the network is created in Ad hoc
modeg.
If you select Advanced, the connection is established in
infrastructure mode
g
through the access point installed. Set to
Advanced when monitoring and controlling the projector over a
network.
See the following manual for details on Connection Mode.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
(This can only be set if Connection Mode is set to Quick.)
Channel
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
List of Functions
128
Submenu
Function
Submenu
IP Settings
Function
(This can only be set if Connection Mode is set to Quick.)
Set to On to speed up the projector search.
Set to Off when connecting to multiple projectors at the same
(This item can only be set if Connection Mode is set to
SSID Auto Set
ting
Advanced.)
You can make network settings.
DHCP:SettoOn tomakenetworksettingsusing DHCP
is set to On, you cannot set any more addresses.
time.
g
. Ifthis
This is set to On by default.
IP Address: You can input the IP address
g
assigned to the
(This item can only be set when SSID Auto Setting is set to
SSID
projector. You can enter a number from 0 to 255 in each field of
Off.)
the address. However, the following IP addresses cannot be used.
Enter an SSIDg. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters (^
can only be entered from the Web browser). If the SSID is left
blank or set to ANY, an ANY connection (selects a connection
from local access points without specifying an SSID) is
established.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SubnetMask: You can input the subnet mask for the projector.
g
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
When Connection Mode is set to Advanced, you can search for
surroundingaccesspoints, andsettheSSIDtobeconnectedfrom
those access points. Depending on the access point settings, they
may not be displayed in the list. You must set security separately.
Search Access
Point
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the SSID
g
from being displayed on the LAN Standby
SSID Display
screen, set this to Off.
To prevent the IP address
g
from being displayed on the LAN
IP Address Dis
play
Standby screen, set this to Off.
List of Functions
129
Search Access Point screen
Security Menu
Detected access points are displayed in a list. The application can detect up
to 30 access points.
Submenu
Security
Function
Select the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
Submenu
Refresh
Function
Searches for the access point again.
Indicates an already set access point.
(This can only be selected when Security is set to WPA2-PSK or
Passphrase
WPA/WPA2-PSK.)
Enter the passphrase. You can enter at least 8 and up to 63 single-
Indicates the access points where security is set.
If you select an access point where security has not been set, the
Wireless LAN menu is displayed.
If you select an access point where security has been set, the
Security menu is displayed. Select a type of security according to
the security settings for the access point.
byte alphanumeric characters.
When using with EasyMP Network Projection, you do not need
to enter the passphrase in the computer if it is the initial (default)
passphrase.
s "Reset Menu" p.133
You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.
s "Changing Settings Using a Web Browser (Web Control)"
p.102
When Connection Mode is set to Quick, the initial passphrase is
set.
List of Functions
130
Type of security
Wired LAN Menu
When the optional Wireless LAN unit is installed and being used in
Advanced connection mode, it is strongly recommended that you set
security.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
For setting details, follow the instructions from your network
administrator.
a
Submenu
Function
You can make settings related to the following addresses.
IP Settings
DHCP
is set to On, you cannot set any more addresses.
IP Address
g: Set to On to configure the network using DHCP. If this
g
: You can input the IP address assigned to the
projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Maskg: You can input the subnet mask for the projector.
You can input a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Addressg: You can input the IP address for the gateway
for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
List of Functions
131
Submenu
Function
Submenu
Function
To prevent the IP address from being displayed on Network Info
in the Network Menu and on the LAN Standby screen, set this to
Off.
You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
IP Address Dis
play
Port Number
You can input the email address of the destination to send the
notification email to. You can register up to three destinations.
You can enter up to 32 single-byte alphanumeric characters for
the email address. The following characters cannot be used: " ( ) , ;
< > [ \ ]
The address for destination 1 is the mail notification sender's
address.
Address 1 Set
ting/Address 2
Setting/Address
3 Setting
Mail Menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified destination address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.
s
"Using the Mail Notification Function to Report Problems" p.104
Submenu
Function
SettoOn tosendanemailtothe presetaddresseswhenaproblem
or warning occurs with a projector.
Mail Notification
You can input the IP address
g
for the SMTP server for the
SMTP Server
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0to255.255.255.255(wherexisanumberfrom
0 to 255)
List of Functions
132
Others Menu
Submenu
Function
Set this to On only when monitoring or controlling the projector
Crestron Room
View
over the network using Crestron RoomView . Otherwise, set
®
this to Off.
s "About Crestron RoomView " p.108
®
When this is set to On, the following functions are not available.
• Web Control
• Message Broadcasting (EasyMP Monitor Plug-in)
Set this to On when connecting to the network using Bonjour.
Bonjour
See Apple's Web site for more information on the Bonjour
service.
http://www.apple.com/
You can switch the EPSON Message Broadcasting function to
enable or disable.
Message Broad
casting
Submenu
SNMP
Function
Set to On to monitor the projector using SNMP.
To monitor the projector, you need to install the SNMP manager
program on your computer. SNMP should be managed by a
network administrator.
The default value is Off.
You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
Trap IP Address
1/Trap IP Ad
dress 2
You can set the priority gateway to a Wired LAN or Wireless
LAN.
Priority Gateway
When the projector is connected to a network, set this to On to
AMX Device Dis
covery
allow the projector to be detected by AMX Device Discovery
Set this to Off if you are not connected to an environment
controlled by a controller from AMX or AMX Device
Discovery.
g.
List of Functions
133
Reset Menu
ECO Menu
Resets all of the network settings.
When you make ECO menu settings, the projector performs functions to
save power. When power saving settings have been enabled, a leaf icon is
displayed next to each submenu.
Submenu
Function
To reset all of the Network settings, select Yes.
Reset network
settings.
Submenu
Function
You can set the lamp brightness to one of two settings. Select
ECO if the images being projected are too bright, such as when
projecting images in a dark room or onto a small screen. When
ECO is selected, power consumption during projection
decreases, and fan rotation noise is reduced.
Power Consump
tion
(This item can only be set when Power Consumption is set to
Normal and Auto Iris is set to Off.)
Light Optimizer
When set to On, the lamp brightness is adjusted according to the
image being projected. This helps to reduce the amount of
electricity being used by lowering the lamp's brightness
according to the scene being projected.
The setting is stored for each Color Mode.
List of Functions
134
Submenu
Function
Submenu
Reset
Function
When set to On, this automatically stops projection when no
image signalisbeinginputandnooperationsarecarriedoutfora
specified length of time. Also, if no image signal is input for a
specified length of time, the lamp dims until the power turns off.
When an image signal is input, the projector returns to normal
operating status.
You can reset all adjustment values on the ECO menu to their
default settings, except for Standby Mode. See the following to
return all menu items to their default settings.
Sleep Mode
s "Reset Menu" p.135
When Sleep Mode is set to On, you can set the time before the
projector automatically turns off within a range of 1 to 30
minutes.
Sleep Mode Tim
er
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected. Depending on the model used, some input
sources are not supported.
When set to On, this turns off the power automatically 30
minutes after A/V mute is enabled. Also, if A/V mute is enabled
and a specified length of time has passed, the lamp dims until the
power turns off. When A/V mute is disabled, the projector
returns to normal operating status.
A/V Mute Timer
s
"Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.43
If you set Communication On, you can perform the following
operations even if the projector is in standby mode.
Standby Mode
• Monitor and control the projector from a computer over the
network
• Output audio and images to an external device (only when
A/V Output is set to Always On)
• Output audio from the projector's speaker (only when A/V
Output is set to Always On)
Set Connection Mode to Advanced when
monitoring and controlling the projector over
a
wireless LAN.
s Network - Wireless LAN - Connection
Mode p.115
When set to On, when the lamp brightness changes from normal
to low or low to normal, leaf icons are displayed at the bottom-
left of the projected screen to indicate the power-saving status.
ECO Display
List of Functions
135
Submenu
Function
Reset Menu
• Lamp Hours: Displays the cumulative lamp operating
Projector Info
*
time . When it reaches the lamp warning time, the
characters are displayed in yellow.
• Source: Displays the source name for the connected
equipment currently being projected.
• Input Signal: Displays the setting for Input Signal in the
Signal menu according to the source.
• Resolution: Displays the resolution.
• Video Signal: Displays the settings for Video Signal in
the Signal menu.
• Refresh Rate: Displays the refresh rate
g.
• Sync Info: Displays the image signal information.
This information may be needed if service is required.
• Status: Displays the information about errors that have
occurred in the projector. This information may be
needed if service is required.
Submenu
Reset All
Function
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Zoom, User's Logo, all items for Network menus, Lamp Hours,
Language, and Password.
• Serial Number: Displays the projector's serial number.
• Event ID: Displays the problems occurred in the projector
using the Event IDs, when the projector and the
computer are connected through the network. See the
following page for the detailed information on the Event
ID.
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
Reset Lamp
Hours
s "About Event ID" p.161
Main/Video: Displays the projector's firmware version.
Version
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
136
Performing Batch Setup for Multiple Projectors
Once the Configuration menu content has been set for one projector, you
can use it to perform batch setup for multiple projectors (batch setup
function). The batch setup function is only for projectors with the same
model number.
• Use a FAT format USB storage device.
a
• The batch setup function cannot be used by USB storage device that
incorporate security functions. Use a USB storage device that does
not incorporate security functions.
Use one of the following methods.
• The batch setup function cannot be used by USB card readers or
USB hard disks.
• Setup using a USB memory.
• Setup by connecting the computer and projector with a USB cable.
• Setup using EasyMP Network Updater.
This guide explains the USB storage device and the USB cable methods.
Saving Settings to a USB Memory
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
The following content is not reflected by the batch setup function.
• Network menu settings (except for Mail and Others menu)
• Lamp Hours and Status from the Info menu
• Perform batch setup before adjusting the projected image.
Adjustment values for the projected image, such as Keystone, are
also reflected by the batch setup function. If batch setup is
performed after adjusting the projected image, the adjustments you
made may change.
a
b
a
Connect the USB storage device to the projector's USB-A port.
a • Connect the USB storage device to the projector. If the USB
storage device is connected to the projector through a USB
hub, the settings may not be saved correctly.
• Connect an empty USB storage device. If the USB storage
device contains data other than the batch setup file, the
settings may not be saved correctly.
• By using the batch setup function, the registered User's Logo is set
for the other projectors. Do not register confidential information and
so on as the User's Logo.
• If you have saved a batch setup file from another projector to
the USB storage device, delete the file or change the file
name. The batch setup function cannot overwrite a batch
setup file.
Caution
• The file name for the batch setup file is PJCONFDATA.bin. If
you need to change the file name, add text after
PJCONFDATA. If you change to another file name, the
projector may not recognize it correctly.
Performing batch setup is the customers responsibility. If batch setup fails due
to a power failure, communication error, and so on, the customer is responsible
for any repair costs incurred.
• You can only use single-byte haracters for the file name.
Setting Up Using a USB Memory
This section explains how to perform batch setup using a USB storage
device.
Performing Batch Setup for Multiple Projectors
137
While holding down the [Esc] button on the remote control or the
control panel, connect the power cord to the projector.
c
The status indicator and the power indicator turn blue, and the lamp
indicator and the temperature indicator turn orange.
When all of the projector's indicators turn on, release the [Esc]
button.
When the power turns off, remove the USB storage device.
Reflecting Saved Settings to Other Projectors
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
a
b
When all of the indicators start flashing, the batch setup file is being
written.
Connect the USB storage device containing the saved batch setup
file to the projector's USB-A port.
Caution
a • When the USB memory drive contains 1 to 3 types of batch
• Do not disconnect the power cord from the projector while the file is
being written. If the power cord is disconnected, the projector may not
start correctly.
• Do not disconnect the USB storage device from the projector while the
file is being written. If the USB storage device is disconnected, the
projector may not start correctly.
setup files, the file is reflected to the projector with the same
model number. If there are multiple files for a projector with
the same model number, the settings may not be reflected
correctly.
• When there are four or more types of batch setup files on the
USB storage device, the settings may not be reflected
correctly.
• Do not store any data except for the batch setup file on the
USB storage device. If the USB storage device contains data
other than the batch setup file, the settings may not be
reflected correctly.
When writing completes normally, the projector turns off, and only
the power indicator is lit blue.
Performing Batch Setup for Multiple Projectors
138
While holding down the [Menu] button on the remote control or
the control panel, connect the power cord to the projector.
c
The status indicator and the power indicator turn blue, and the lamp
indicator and the temperature indicator turn orange.
When all of the projector's indicators turn on, release the [Menu]
button. The indicators turn on for approximately 75 seconds.
When the projector turns off, disconnect the USB storage device.
Setup by Connecting the Computer and Projector
with a USB Cable
When all of the indicators start flashing, the settings are being
written.
The following operating systems support the batch setup function.
• Windows Vista and later
• Mac OS X 10.5.3 and later
a
Caution
• Do not disconnect the power cord from the projector while the
settings are being written. If the power cord is disconnected, the
projector may not start correctly.
Saving Settings to a Computer
• Do not disconnect the USB storage device from the projector while the
settings are being written. If the USB storage device is disconnected,
the projector may not start correctly.
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
a
Connect the computer's USB port to the projector's USB-B port
with a USB cable.
When writing completes normally, the projector turns off, and only the
power indicator is lit blue.
b
Performing Batch Setup for Multiple Projectors
139
While holding down the [Esc] button on the remote control or the
control panel, connect the power cord to the projector.
c
The status indicator and the power indicator turn blue, and the lamp
indicator and the temperature indicator turn orange.
When all of the projector's indicators turn on, release the [Esc]
button.
Reflecting Saved Settings to Other Projectors
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
a
b
c
Connect the computer's USB port to the projector's USB-B port
with a USB cable.
The projector is recognized as a removable disk by the computer.
Open the removable disk, and save the batch setup file
(PJCONFDATA.bin) to the computer.
While holding down the [Menu] button on the remote control or
the control panel, connect the power cord to the projector.
d
The status indicator and the power indicator turn blue, and the lamp
indicator and the temperature indicator turn orange.
If you need to change the name of the batch setup file, add text
after PJCONFDATA. If you change the PJCONFDATA section
a
of the file name, the projector may not be able to recognize the
file correctly. You can only use single-byte characters for the file
name.
When all of the projector's indicators turn on, release the [Menu]
button.
Perform "Remove USB Device" on the computer, and then
disconnect the USB cable.
e
a When using OS X, perform "Remove EPSON_PJ".
The projector turns off and only the power indicator is lit blue.
Performing Batch Setup for Multiple Projectors
140
The projector is recognized as a removable disk by the computer.
Copy the batch setup file (PJCONFDATA.bin) that you saved to
your computer to the toplevel folder of the removable disk.
d
Do not copy any files or folders other than the batch setup file
to the removable disk.
a
Perform "Remove USB Device" on your computer, and then
disconnect the USB cable.
e
When Setup Fails
a When using OS X, perform "Remove EPSON_PJ".
Check
Remedy
Are the lamp indicator and the
temperature indicator flashing orange
quickly?
The batch setup file may be corrupt, or the
USB storage device or USB cable may not
be connected correctly. Disconnect the
USB storage device or USB cable, unplug
and then plug in the projector's power
cord, and then try again.
When all of the indicators start flashing, the settings are being
written.
Caution
Do not disconnect the power cord from the projector while the settings
are being written. If the power cord is disconnected, the projector may
not start correctly.
Are the power indicator and the status
indicator flashing blue quickly, and the
lamp indicator and the temperature
indicator flashing orange quickly?
Writing the settings may have failed and
an error may have occurred in the
projector's firmware. Stop using the
projector, remove the power plug from
theelectricaloutlet, andcontact yourlocal
dealer or the nearest address provided in
the Epson Projector Contact List.
When writing completes normally, the projector turns off, and only the
power indicator is lit blue.
Troubleshooting
This chapter explains how to identify problems and what to do if a problem is found.
142
Using the Help
If a problem occurs with the projector, the Help screen is displayed to assist
you by pressing the Help button. You can solve problems by answering the
questions.
Confirm the selection.
Using the remote control
c
Using the control panel
Press the [Help] button.
a
The Help screen is displayed.
Using the remote control
Using the control panel
Questions and solutions are displayed as shown on the screen below.
Press the [Help] button to exit the Help.
Select a menu item.
b
See the following if the Help function does not provide a
solution to the problem.
a
s "Problem Solving" p.143
Using the remote control
Using the control panel
143
Problem Solving
If you are having a problem with the projector, first check the projector's indicators and see "Reading the Indicators".
See the following if the indicators do not show clearly what the problem might be.
s
"When the Indicators Provide No Help" p.147
Reading the Indicators
The projector is provided with the following four indicators that indicate the operating status of the projector.
Power indicator
Status indicator
Lamp indicator
Temp indicator
Indicates the projector's status.
Indicates the projector's status.
Indicates the lamp's status.
A
B
C
D
Indicates the internal temperature's status.
Indicators
Status
Explanation
Power supply
Status
Off
Standby condition
Power is being supplied to the projector. When the [t] power button is pressed in this condition, projection
starts.
Blue - Lit
Network monitoring
status
The projector is being monitored and controlled over a network (when Standby Mode is set to
Communication On). If the power cord is disconnected and then reconnected in this status, the power
indicator flashes blue.
Problem Solving
144
Indicators
Status
Explanation
Power supply
Status
Warm-up status
This is the status immediately after turning on the projector. Warm-up takes approximately 30 seconds after
the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.
Blue - Lit
Blue-Flashing
Cool down status
Normal status
This is the status immediately after turning off the projector. In this status, all buttons are disabled.
The projector is projecting.
Blue - Lit
Blue - Lit
Refer to the following table to see what the indicators mean and how to remedy problems that they indicate.
If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally.
Sometimes, when the power cord is unplugged, the [t] power indicator remains lit for a short period, but this is not a fault.
Indicators
Cause
Remedy or Status
Power sup
ply
Status
Lamp
Tempera
ture
Internal Error
Stop using the projector, remove the power plug from the electrical outlet, and contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
Off
Off
Off
Blue - Flash-
ing
Orange -
Flashing
Off
s Epson Projector Contact List
Fan Error
Sensor Error
Stop using the projector, remove the power plug from the electrical outlet, and contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Blue - Flash-
ing
Off
Off
Orange -
Flashing
High Temp Error
Overheating
The lamp turns off automatically and projection stops. Wait for about five minutes. After about five
minutes the projector switches to standby mode, so check the following two points.
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned
against a wall.
Blue - Flash-
ing
Orange - Lit
• If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.163, "Replacing the Air Filter" p.169
If the error continues after checking the points above, stop using the projector, remove the power
plug from the electrical outlet, and contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s Epson Projector Contact List
Problem Solving
145
Indicators
Status Lamp
Cause
Remedy or Status
Power sup
ply
Tempera
ture
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s "Extended Menu" p.120
Lamp Error
Check the following two points.
Lamp Failure
• Take out the lamp and check if it is cracked.
Off
Blue - Flash- Orange - Lit
ing
Off
s "Replacing the Lamp" p.166
• Clean the air filter.
s "Cleaning the Air Filter" p.163
If the lamp is not cracked: Reinstall the lamp and plug in the power cord.
Iftheerrorcontinues:Stopusingtheprojector, removethepowerplugfromtheelectricaloutlet, and
contact your local dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
If the lamp is cracked: Contact your local dealer or the nearest address provided in the Epson
Projector Contact List. (Images cannot be projected until the lamp is replaced.)
s Epson Projector Contact List
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
s "Extended Menu" p.120
Auto Iris Error
Power Err.
Stop using the projector, remove the power plug from the electrical outlet, and contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Off
Off
Blue - Flash-
ing
Orange -
Flashing
Orange -
Flashing
Blue - Flash- Orange - Lit Orange - Lit
ing
High Temp Warn- (This is not an abnormality. However, if the temperature rises too high again, projection stops
ing
automatically.)
Blue - Flash-
ing
State de-
pendent in- pendent in-
dication dication
State de-
Orange -
Flashing
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned
against a wall.
• If the air filter is clogged, clean or replace it.
s "Cleaning the Air Filter" p.163, "Replacing the Air Filter" p.169
Problem Solving
146
Indicators
Status Lamp
Cause
Remedy or Status
Power sup
ply
Tempera
ture
Replace Lamp
Replace it with a new lamp.
s "Replacing the Lamp" p.166
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp
may explode increases. Replace it with a new lamp as soon as possible.
Blue - Flash-
ing
State de-
pendent in-
dication
Orange -
Flashing
State de-
pendent in-
dication
a • See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help" p.147
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Problem Solving
147
Other Problems
When the Indicators Provide No Help
• No sound can be heard or the sound is faint
s p.154
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
• No sound can be heard from the microphone
• There is noise in the audio (only when projecting USB display)
• The remote control does not work
s p.155
s p.155
s p.156
s p.156
s p.156
s p.157
Problems Relating to Images
• No images appear
Projection does not start, the projection area is completely black
or blue.
s p.148
• I want to change the language for messages and menus
• Mail is not received even if a problem occurs in the projector
• Cannot change settings using a web browser
• Moving images are not displayed (only the moving image portion s p.149
turns black)
Moving images played back from a computer appear black and
the images are not projected
Problems with the Interactive Function (EB-536Wi only)
• Cannot draw on the projected screen
s p.157
• Projection stops automatically
s p.149
s p.149
s p.150
s p.150
s p.151
s p.152
• Cannot operate a computer from the projected screen after
connecting to the computer
s p.158
• The message "Not supported" is displayed
• The message "No Signal" is displayed
• The message "An error occurred in the Easy Interactive Function." s p.158
is displayed
• Images are fuzzy, out of focus, or distorted
• Interference or distortion appear in images
• The mouse cursor flickers (only when projecting USB display)
• Computer's mouse does not work correctly
s p.158
s p.159
s p.159
• The interactive pen does not work
• The image is truncated (large) or small, or the aspect ratio is not s p.152
suitable
Only part of the image is displayed, or the height and width
ratios of the image are not correct
• The response time for the interactive pen is slow (only when
projecting USB display)
• The dot moves automatically or does not move to the next position s p.160
during manual calibration
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull
s p.153
• Images appear dark
s p.153
Problems when Projection Starts
• The projector does not turn on
s p.154
Problem Solving
148
Problems Relating to Images
No Images Appear
Check
Did you press the [t] power button?
Are the indicators switched off?
Remedy
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Connect the projector's power cord correctly.
s "Turning On the Projector" p.41
Check that your electrical outlet or power source is functioning correctly.
Is A/V Mute active?
Press the [A/V Mute] button to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.90
Are the Configuration menu settings correct?
Reset all of the settings.
s Reset - Reset All p.135
Is the image to be projected completely black?
(Only when projecting computer images)
Some input images, such as screen savers, may be completely black.
Is the image signal format setting correct?
Change the setting according to the signal for the connected equipment.
(Only when projecting images from a video source)
s Signal - Video Signal p.117
Is the USB cable connected correctly?
(Only when projecting USB Display)
Check that the USB cable is connected correctly. Reconnect it if it is not connected or not connected properly.
Is Windows Media Center displayed in full screen?
(Only when projecting using USB Display or network connection)
When Windows Media Center is displayed at full screen, you cannot project using USB Display or network connection.
Reduce the screen size.
Is an application using the Windows DirectX function displayed? Applications using the Windows DirectX function may not display images correctly.
(Only when projecting using USB Display or network connection)
Problem Solving
149
Moving Images are Not Displayed (Only the Moving Image Portion Turns Black)
Check
Remedy
Is the computer's image signal being output to the LCD and the
monitor?
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Projection Stops Automatically
Check
Remedy
Are Sleep Mode or A/V Mute Timer set to On?
If any of these are set to On, the power turns off automatically in the following situations.
• When Sleep Mode is set to On: If no operations are performed for a specified length of time while no image signal is
being input.
• When A/V Mute Timer is set to On: If approximately 30 minutes has passed since the A/V mute was enabled.
To prevent the projector from switching off automatically, make sure each setting is set to Off.
s ECO - Sleep Mode, A/V Mute Timer p.133
Is the computer in power-saving mode?
If the computer is in power-saving mode and no operations are performed for a specified period of time, the image may
disappear. Perform an operation on the computer to display the image again.
The Message "Not supported" is Displayed
Check
Remedy
Is the image signal format setting correct?
Change the setting according to the signal for the connected equipment.
(Only when projecting images from a video source)
s Signal - Video Signal p.117
Do the image signal resolution and the refresh rate correspond to the Seethedocumentationsupplied withthecomputerforhow tochangetheimagesignalresolutionand refreshrateoutput
mode?
from the computer.
(Only when projecting computer images)
s "Supported Monitor Displays" p.176
Problem Solving
150
The Message "No Signal" is Displayed
Check
Remedy
Are the cables connected correctly?
Check that all the cables required for projection are securely connected.
s "Turning On the Projector" p.41
Is the correct port selected?
Change the image by pressing the [Source Search] button on the remote control or the control panel.
s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.43
Is the power of the connected computer or video equipment turned Turn the power on for the equipment.
on?
Are the image signals being output to the projector?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
If the image signals are only being output to the computer's LCD monitor or accessory monitor, change the output so
that the image signals are also output externally. For some computer models, when the image signals are output
externally, they no longer appear on the LCD monitor or accessory monitor.
If the connection is made while the power of the projector or computer is already turned on, the Fn key (Function key)
thatchanges thecomputer'simagesignaltoexternaloutputmaynotwork. Turntheprojectorandcomputeroffandthen
back on again.
s "Turning On the Projector" p.41
s Computer's documentation
Is the computer in power-saving mode?
If the computer is in power-saving mode and no operations are performed for a specified period of time, the image may
disappear. Perform an operation on the computer to display the image again.
Images are Fuzzy, Out of Focus, or Distorted
Check
Remedy
Is the focus adjusted correctly?
Move the focus lever to adjust the focus.
s "Correcting the Focus" p.53
Is the projector at the correct distance?
Is it projecting outside of the recommended projection distance range?
Setup within the recommended range.
s "Screen Size and Projection Distance" p.173
Is the Keystone adjustment value too large?
Lower the projection angle to reduce the amount of Keystone correction.
s "Adjusting the Image Position" p.52
Problem Solving
151
Check
set correctly?
Remedy
Is the Aspect Ratio
g
You can change the Aspect Ratio of the projected image to suit the type, the ratio of height and width, and the resolution
of the input signals.
s "Changing the Aspect Ratio of the Projected Image" p.55
Has condensation formed on the lens?
If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature
changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the
projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and
wait for the condensation to disappear.
Interference or Distortion Appear in Images
Check
Remedy
Is the image signal format setting correct?
Change the setting according to the signal for the connected equipment.
(Only when projecting images from a video source)
s Signal - Video Signal p.117
Are the cables connected correctly?
Is an extension cable being used?
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.26
If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the projector to
check if the cables you are using may be causing the problem.
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.176
s Computer's documentation
Are the Sync.
(Only when projecting computer images)
g
and Tracking
g
settings adjusted correctly?
Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic
adjustment. If the images are not adjusted correctly even after performing automatic adjustment, you can also make
adjustments from the Configuration menu.
s Signal - Tracking, Sync. p.117
Is Transfer layered window selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then clear
the Transfer layered window checkbox.
Problem Solving
152
The Mouse Cursor Flickers (Only when Projecting USB Display)
Check
Remedy
Is Make the movement of the mouse pointer smooth. selected?
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Make the movement of the mouse pointer smooth. checkbox. (Windows 2000 is unavailable.)
Windows Aero becomes unavailable if this is selected in Windows 7 and Windows Vista.
The Image Is Truncated (Large) or Small, or the Aspect Is Not Suitable
Check
Remedy
Is a wide-panel computer image being projected?
(Only when projecting computer images)
Change the setting according to the signal for the connected equipment.
s Signal - Resolution p.117
Is the image still being enlarged by E-Zoom?
Press the [Esc] button on the remote control to cancel E-Zoom.
s "Enlarging Part of the Image (E-Zoom)" p.92
Is the display position adjusted correctly?
(Only when projecting analog RGB signals input from the Computer1 or Computer2 port)
Press the [Auto] button on the remote control or the [Enter] button on the control panel to adjust the position.
You can also adjust the position from the Configuration menu.
s Signal - Position p.117
Is the computer set for dual display?
(Only when projecting computer images)
If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the
computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
s Computer video driver documentation
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.176
s Computer's documentation
Is the projection mode correct?
Depending on how the projector is installed, set Projection to one of the following: Front, Front/Ceiling, Rear,
Rear/Ceiling.
s Extended - Projection p.120
s "Installation Methods" p.23
Problem Solving
153
Image Colors are Not Right
Check
Remedy
Do the input signal settings match the signals from the connected Change the following settings according to the signal for the connected equipment.
device?
• When the image is from a device connected to the Computer1 or Computer2 port.
s Signal - Input Signal p.117
• When the image is from a device connected to the Video or S-Video port.
s Signal - Video Signal p.117
Is the image brightness adjusted correctly?
Are the cables connected correctly?
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.116
Check that all the cables required for projection are securely connected.
s "Connecting Equipment" p.26
Is the contrast
g
adjusted correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.116
Is color adjustment set to an appropriate value?
Adjust the Color Adjustment setting from the Configuration menu.
s Image - Color Adjustment p.116
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.116
Images Appear Dark
Check
Remedy
Is the image brightness set correctly?
Adjust the Brightness and Power Consumption settings from the Configuration menu.
s Image - Brightness p.116
s ECO - Power Consumption p.133
Is the contrast
g
adjusted correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.116
Is it time to replace the lamp?
When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one.
s "Replacing the Lamp" p.166
Are you using the projector at a high altitude or in a location subject The screen may become dark when using at high altitude or in a location subject to high temperatures. Although you
to high temperatures? cannot make Power Consumption settings at this time, you can continue to use the projector.
Problem Solving
154
Problems when Projection Starts
The Projector Does Not Turn On
Check
Did you press the [t] power button?
Are the indicators switched off?
Remedy
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.
s "Turning On the Projector" p.41
Check that your electrical outlet or power source is functioning correctly.
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Is the Control Panel Lock set to Full Lock?
Press the [t] power button on the remote control. If you do not want to use Control Panel Lock, change the setting to
Off.
s Settings - Control Panel Lock p.119
Is remote control operation restricted?
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.119
Other Problems
No Sound can be Heard or the Sound is Faint
Check
Remedy
Check that the audio/video cable is securely attached to both the
projector and audio source.
Disconnect the cable from the audio input port, and then reconnect the cable.
Is the projector volume set to the minimum?
Adjust the volume so that sound can be heard.
s Settings - Volume p.119
s "Adjusting the Volume" p.53
Problem Solving
155
Check
Remedy
Is the volume for the computer or from the image source set to the Adjust the volume so that sound can be heard.
minimum?
Is the Mic Input Level set at the maximum?
Lower the Mic Input Level.
s Settings - Mic Input Level p.119
Is A/V Mute active?
Press the [A/V Mute] button to cancel A/V Mute.
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.90
Is the audio cable's specification "No resistance"?
Is it connected with an HDMI cable?
When using a commercially available audio cable, make sure it is labeled "No resistance".
If no audio is output when connecting via an HDMI cable, set the connected equipment to PCM output.
Is Output audio from the projector selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Output audio from the projector checkbox.
Is the correct audio input selected?
Check the Audio Output and HDMI Audio Output settings from the Configuration menu.
s Extended - A/V Settings p.120
No Sound can be Heard from the Microphone
Check
Remedy
Is the microphone connected correctly?
Disconnect the cable from the Microphone (Mic) input port, and then reconnect the cable.
s "Connecting a Microphone" p.32
Is the microphone input volume turned down too low?
Are you using a plug-in power type microphone?
Adjust the microphone input volume so that sound can be heard.
s Settings - Mic Input Level p.119
The projector does not support plug-in power type microphones. Use a commercially available dynamic microphone.
There is Noise in the Audio (Only when Projecting USB Display)
Check
Remedy
Is the volume for the computer set to the minimum while the
projector is set to the maximum?
The audio may contain noise if the volume for the computer is set to minimum while the projector's volume is set to
maximum. Increase the volume for the computer, and decrease the volume for the projector.
s Settings - Volume p.119
Problem Solving
156
The Remote Control Does Not Work
Check
Remedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation?
Point the remote control towards the remote receiver during operation.
s "Remote Control Operating Range" p.19
Is the remote control too far from the projector?
The operating range for the remote control is about 6 m.
s "Remote Control Operating Range" p.19
Is direct sunlight or stronglight from fluorescent lampsshining onto Set the projector up in a location where strong light does not shine onto the remote receiver.
the remote receiver?
s Settings - Remote Receiver p.119
Is the correct setting for the Remote Receiver selected?
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.119
Are the batteries dead or have the batteries been inserted correctly? Insert new batteries in the correct direction.
s "Replacing the Remote Control Batteries" p.18
I Want to Change the Language for Messages and Menus
Check
Remedy
Adjust the Language setting from the Configuration menu.
s Extended - Language p.120
Change the Language setting.
Mail is Not Received even if a Problem Occurs in the Projector
Check
Remedy
Is Standby Mode set to Communication On?
To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s ECO - Standby Mode p.133
Did a fatal abnormality occur and the projector come to a sudden When the projector comes to a sudden stop, email cannot be sent.
stop?
If the abnormal state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
s Epson Projector Contact List
Is power being supplied to the projector?
Check that your electrical outlet or power source is functioning correctly.
Problem Solving
157
Check
Remedy
Is the Mail Notification function set correctly in the Configuration An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly.
menu?
s "Mail Menu" p.131
Cannot Change Settings Using a Web Browser
Check
Remedy
Are the user ID and password correct?
Enter "EPSONWEB" as the user ID. This cannot be changed. Enter the user ID even if the password setting is
disabled.
Enter the password you set in Web Control Password. The initial password is "admin".
Problems with the Interactive Features (EB-536Wi only)
Cannot Draw on the Projected Screen
Check
Remedy
Has pen calibration been performed correctly?
Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes
the position of the pen correctly.
Also, calibrate the pen again if you notice any discrepancy in positioning.
s "Pen Calibration" p.68
Is Pen Mode set to PC Interactive?
Set Pen Mode to PC Free Annotation from the Configuration menu.
s Extended - Easy Interactive Function - Pen Mode p.123
Is the projector installed in direct sunlight from a window, or light Whendirectsunlightorlightfromafluorescentlightshinesontotheprojectionscreenortheprojector, itcouldcausethe
from a fluorescent light?
interactive features to malfunction. Install the projector in a position where it is not subject to direct sunlight or light
from a fluorescent light.
Problem Solving
158
Cannot Operate a Computer from the Projected Screen After Connecting to the Computer
Check
Remedy
Is Extended set correctly?
Make the following settings:
• Set Pen Mode to PC Interactive from the Configuration menu.
s Extended - Easy Interactive Function - Pen Mode p.123
• Set USB Type B to Easy Interactive Function or USB Display/Easy Interactive Function from the Configuration
menu. When using USB Display, set USB Display/Easy Interactive Function.
s Extended - USB Type B p.120
Is the Pen Operation Mode set correctly?
When using interactive pens as you would use a mouse, set the Pen Operation Mode to Two Users/Mouse or One
User/Mouse from the Configuration menu.
s Extended - Easy Interactive Function - Pen Operation Mode p.123
Is the USB cable connected correctly?
Check the USB cable connections. You may be able to resolve the problem by disconnecting and then reconnecting the
USB cable.
If you are using a notebook computer when the battery power is
running low, the USB port may stop working and you might not be
able to use USB devices.
Connect the computer to a power source.
The Message "An error occurred in the Easy Interactive Function." is Displayed
Check
Remedy
An error has occurred in the interactive features.
Contact the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Computer's Mouse Does Not Work Correctly
Check
Remedy
Is the interactive pen placed on the projection screen?
Remove the interactive pen from the projection screen.
Problem Solving
159
The Interactive Pen Does Not Work
Check
Remedy
There is an obstacle in the signal route between the interactive pen Remove the obstacle. Also, do not block the signal route when standing in front of the projection screen.
and the projector.
The signal is interfering with other things such as a light source that Do not use an infrared remote control or infrared microphone in the same room because the interactive pen may
is emitting infrared rays.
malfunction. Switch off the interfering device such as a light source that is emitting infrared rays.
The battery is low.
Press the button on the side of the pen to check the remaining battery power. If the battery light does not turn on, replace
the battery.
s "Replacing the Battery for the Interactive Pen" p.20
The surrounding area is too bright.
Do not allow strong light to shine on the projected screen or the projector's Easy Interactive Function receiver.
Has pen calibration been performed correctly?
Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes
the position of the pen correctly.
Also, calibrate the pen again if you notice any discrepancy in positioning.
s "Pen Calibration" p.68
Are multiple projectors being used in the same room?
When using the interactive pen in the same room as multiple projectors, interference may cause pen operations to
become unstable. Connect the optional Remote control cable set (ELPKC28). If you do not have a Remote control cable
set, change the Distance of Projectors setting from the Configuration menu.
s "Connecting Multiple Projectors (EB-536Wi only)" p.38
s Extended - Easy Interactive Function - General - Advanced - Distance of Projectors p.123
The Response Time for the Interactive Pen is Slow (Only when Projecting USB Display)
Check
Remedy
Is Windows Aero enabled? (Windows 7 and Windows Vista only) Interactive pen operations may be slow when Windows Aero is enabled. Disable Windows Aero on the computer being
used.
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Ver.x.xx Settings, and then select
the Disable Windows Aero and improve the tracking of the interactive pen. checkbox.
Problem Solving
160
The Dot Moves Automatically or Does Not Move to the Next Position During Manual Calibration
Check
Remedy
Information from the projection screen is not correctly received due Move the device, such as a lightsource that is emitting infraredrays, away fromthe projector, ormove theprojector away
to other things, such as a light source that is emitting infrared rays. from the device.
Information from the projection screen may not be received
correctly if the projector is too close to the screen.
Setup within the recommended projection distance.
s "Screen Size and Projection Distance" p.173
The interactive pen is disabled due to unstable conditions in the
surrounding area, such as a light source that is emitting infrared
rays.
Move the projector or turn off the interfering device, such as a light source that is emitting infrared rays.
161
About Event ID
Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local
dealer or the nearest address provided in the Epson Projector Contact List.
s
Epson Projector Contact List
Event ID
Cause
Remedy
0432
0435
Failed to start EasyMP Network Projection.
Restart the projector.
0434
0482
0484
0485
Network communication is unstable.
Check the network communication status, and reconnect after waiting for a
while.
0433
0481
Cannot play transferred images.
Restart EasyMP Network Projection.
Communication was disconnected from the computer.
EasyMP Network Projection ended unexpectedly.
0483
04FE
Check the network communication status, and then restart the projector.
Restart the projector.
0479
04FF
A system error occurred in the projector.
0891
0892
0893
0894
Cannot find an access point with the same SSID.
The WPA/WPA2 authentication type does not match.
The TKIP/AES encryption type does not match.
Set the computer, the access point, and the projector to the same SSID.
Check that the wireless LAN security settings are correct.
s Security p.129
Communication was disconnected because the projector connected to an
unauthorized access point.
Contact your network administrator for more information.
0898
0899
Failed to acquire DHCP.
Check that the DHCP server is operating correctly. If you are not using DHCP,
turn off the DHCP setting.
s Wireless LAN - IP Settings p.127
Other communication errors
If restarting the projector or EasyMP Network Projection does not solve the
problem, contact your local dealer or the nearest address provided in the Epson
Projector Contact List.
s Epson Projector Contact List
Maintenance
This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
163
Cleaning
You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks as it
can easily become damaged.
Caution
Before cleaning, turn off the projector's power and unplug the power cable.
Otherwise, it could cause an electric shock.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
Cleaning the Projector's Surface
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter."
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
• Dust collecting on the air filter may cause the internal temperature of the
projector to rise, leading to a malfunction or early deterioration of optical
parts. Clean the air filter immediately when the message is displayed.
Attention
• Do not rinse the air filter in water. Do not use detergents or solvents.
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
a
Cleaning the Lens
Open the air filter cover.
b
Place your finger into the grove at the top of the air filter cover, and
pull down to open.
Use a commercially available cloth for cleaning glasses to gently wipe the
lens.
Warning
Do not use sprays that contain flammable gas to remove dust and lint from the
lens. The projector may catch fire due to the high internal temperature of the
lamp inside the projector.
Cleaning
164
Replace the air filter.
e
f
Remove the air filter.
c
d
Grip the tab in the center of the air filter, and pull the air filter
straight out.
Close the air filter cover.
Remove any dust remaining on the air filter by using a vacuum
cleaner from the front.
Cleaning
165
a • If a message is frequently displayed, even after cleaning, it is time to
replace the air filter. Replace it with a new air filter.
s "Replacing the Air Filter" p.169
• It is recommended that you clean these parts at least once every
three months. Clean them more often than this if using the projector
in a particularly dusty environment.
166
Replacing Consumables
This section explains how to replace the lamp and the air filter.
• The projected image gets darker or starts to deteriorate.
Attention
• The lamp replacement message is set to appear after the following time
periods in order to maintain the initial brightness and quality of the projected
images.
When Power Consumption is set to Normal: About 4,900 hours
When Power Consumption is set to ECO: About 9900 hours
s ECO - Power Consumption p.133
• If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message is displayed, replace the lamp with a new one as soon as possible,
even if it is still working.
Replacing the Lamp
Lamp Replacement Period
It is time to replace the lamp when:
• The following message is displayed.
"Time to replace the lamp. Please contact your Epson projector reseller or
visit www.epson.com to purchase."
• Do not repeatedly turn off the power and immediately back on. Turning the
power on and off frequently may shorten the lamp's operating life.
• Depending on the individual characteristics of the lamp and the way it has
been used, the lamp may become darker or stop working before the message
is displayed. You should always have a spare lamp unit ready in case it is
needed.
• We recommend the use of genuine EPSON option lamps. The use of non-
genuine lamps may affect projection quality and safety. Any damage or
malfunction caused by the use of non-genuine lamps may not be covered by
Epson's warranty.
The message is displayed for 30 seconds.
• The power indicator is flashing blue, and the lamp indicator is flashing
orange.
We recommend that you clean the air filter whenever you replace the
lamp.
a
s "Cleaning the Air Filter" p.163
How to Replace the Lamp
The lamp can be replaced even when the projector is suspended from a wall
or ceiling.
Replacing Consumables
Warning
167
• When replacing the lamp because it has stopped working, there is a
possibility that the lamp may be cracked. When replacing the lamp of a
projector that has been installed on a wall or ceiling, assume that the lamp is
cracked and stand to the side of the lamp cover, not underneath it. Also,
remove the lamp cover gently Be careful when removing the lamp cover as
shards of glass may fall out and could cause an injury. If any shards of glass
get into your eyes or mouth, contact your local physician immediately.
• Never disassemble or modify a lamp. If a modified or disassembled lamp is
installed in the projector and used, it could cause a fire, electric shock, or an
accident.
Caution
Wait until the lamp has cooled down sufficiently before removing the lamp
cover. If the lamp is still hot, burns or other injuries may result. It takes
approximately one hour after the power has been turned off for the lamp to
sufficiently cool down.
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
a
Wait until the lamp has sufficiently cooled down, and then remove
the lamp cover at the top of the projector.
b
Loosen the Lamp cover fixing screw with the screwdriver supplied
with the new lamp unit or a cross-head screwdriver. Slide the lamp
cover straight forward and remove it.
Loosen the two lamp fixing screws.
c
Replacing Consumables
168
Install the new lamp.
e
Insert the new Lamp along the guide rail in the correct direction so
that it fits in place, push in firmly, and once it is fully inserted
tighten the two screws.
Grip the raised section of the old lamp and remove it.
d
If the Lamp is cracked, replace it with a new lamp, or contact your
local dealer for further advice.
s
Epson Projector Contact List
Replace the lamp cover.
f
Replacing Consumables
169
Replacing the Air Filter
Air Filter Replacement Period
If the message is displayed frequently even though the air filter has been
cleaned, replace the air filter.
How to Replace the Air Filter
The air filter can be replaced even when the projector is suspended from a
wall or ceiling.
After you turn off the projector's power and the confirmation
buzzer beeps twice, disconnect the power cord.
a
Attention
• Make sure you install the lamp and lamp cover securely. If the lamp cover is
removed, the lamps turn off automatically as a safety precaution. If the lamp
or the lamp cover is not installed correctly, the lamp will not turn on. Make
sure the lamp cover is not loose or deformed.
Open the air filter cover.
b
Place your finger into the grove at the top of the air filter cover, and
pull down to open.
• This product includes a lamp component that contains mercury (Hg). Please
consult your local regulations regarding disposal or recycling. Do not dispose
of it with normal waste.
Resetting the Lamp Hours
The projector records how long the lamp is on and a message and indicator
notify you when it is time to replace the lamp. After replacing the lamp,
make sure you reset the Lamp Hours from the Reset menu.
s
Reset - Reset Lamp Hours p.134
Only reset the lamp hours after the lamp has been replaced. Otherwise,
the lamp replacement period will not be indicated correctly.
a
Replacing Consumables
170
Remove the air filter.
Close the air filter cover.
c
e
Grip the tab in the center of the air filter, and pull the air filter
straight out.
Dispose of used air filters properly in accordance with your local
regulations.
a
Install the new air filter.
Material of the frame part: ABS
d
Material of the filter part: Polyurethane foam
Appendix
172
Optional Accessories and Consumables
The following optional accessories and consumables are available. Please
purchase these products as and when needed. The following list of optional
accessories and consumables is current as of: August. 2014. Details of
accessories are subject to change without notice.
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male^3)
Use to connect a component video
g
source.
Ceiling pipe (450 mm)*1 ELPFP13
Ceiling pipe (700 mm)*1 ELPFP14
Use when installing the projector on a high ceiling.
Optional Accessories
Ceiling mount*1 ELPMB23
Use when installing the projector on a ceiling.
Wireless LAN unit ELPAP07
Use this to project images from a computer via a wireless communication.
Wall mount*1 ELPMB45
Quick Wireless Connection USB Key ELPAP09
Use this arm type fitting when installing the projector on a wall.
Use when you want to quickly establish one-to-one connection between the
Easy Interactive Pen*2 ELPPN04A/ELPPN04B
Pens for the interactive features. You cannot use Easy Interactive Pens with the
same model number at the same time.
projector and a computer with Windows installed.
Document Camera ELPDC06/ELPDC11/ELPDC12/ELPDC20
Use when projecting images such as books, OHP documents, or slides.
Interactive Pen Extension*2 ELPPE02
Interface box ELPCB02
Attach to the Easy Interactive Pen to extend the pen and use it as a pointer.
When the projector is mounted on a wall or suspended from a ceiling, install the
Replacement Pen Tips*2 ELPPS02
Replacement pen tips for the Easy Interactive Pen.
remote control to operate the projector at hand.
Soft carrying case ELPKS66
A soft case to carry the projector.
*1 Special expertise is required to suspend the projector from a ceiling or mount
it on a wall. Contact your local dealer or the nearest address provided in the
Epson Projector Contact List.
s Epson Projector Contact List
*2 EB-536Wi only.
Computer cable ELPKC02
(1.8 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC09
(3 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Computer cable ELPKC10
(20 m - for mini D-Sub15-pin/mini D-Sub 15pin)
Consumables
Remote control cable set*2 ELPKC28
Lamp unit ELPLP87
Cables to connect multiple projectors that support the interactive features.
Use as a replacement for used lamps.
USB extension cable ELPKC31
Air filter ELPAF47
Connect to a USB cable if the USB cable is too short.
Use as a replacement for used air filters.
173
Screen Size and Projection Distance
Unit: cm
B
Projection Distance (for EB-536Wi/EB-535W/
EB-525W)
A
4:3 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
50"
60"
70"
80"
90"
102"
100 x 76
58 - 79
70 - 96
82 - 112
9
120 x 91
140 x 105
160 x 120
180 x 135
207 x 155
11
13
*
94
14
*
107
16
*
121
18
*
Project using Wide (maximum zoom).
Unit: cm
A
B
16:9 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
60"
70"
130 x 75
63 - 87
74 - 101
85 - 116
14
16
19
21
23
26
150 x 87
180 x 100
200 x 110
220 x 120
250 x 141
80"
*
90"
97
*
100"
113"
108
*
122
*
Project using Wide (maximum zoom).
Projection distance (from lens to screen)
A
B
Distance from the center of the receiver's lens to the base of the screen
(or to the top of the screen, if suspended from a wall or ceiling)
Center of lens
Unit: cm
B
A
C
16:10 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
55"
60"
115 x 72
130 x 81
56 - 77
61 - 84
9
9
Screen Size and Projection Distance
174
A
B
16:10 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
70"
80"
150 x 94
170 x 110
190 x 120
220 x 130
251 x 157
72 - 99
11
13
14
16
18
83 - 113
*
94
90"
*
100"
116"
105
*
122
*
Project using Wide (maximum zoom).
Projection distance (from lens to screen)
A
B
Distance from the center of the receiver's lens to the base of the screen
(or to the top of the screen, if suspended from a wall or ceiling)
Center of lens
Projection Distance (For EB-530/EB-520)
C
Unit: cm
A
B
4:3 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
50"
60"
100 x 76
55 - 75
66 - 90
78 - 106
89 - 122
6
8
120 x 91
140 x 105
160 x 120
180 x 135
200 x 150
219 x 165
70"
9
80"
10
12
13
14
*
90"
101
*
100"
108"
112
*
122
*
Project using Wide (maximum zoom).
Screen Size and Projection Distance
175
Unit: cm
A
B
16:9 Screen Size
Minimum (Wide) to Maximum
(Tele)
Minimum
(Wide)
50"
60"
70"
80"
90"
99"
110 x 62
60 - 82
72 - 99
85 - 116
17
130 x 75
150 x 87
180 x 100
200 x 110
219 x 123
21
24
*
98
28
*
110
31
*
121
34
*
Project using Wide (maximum zoom).
176
Supported Monitor Displays
Even when signals other than those mentioned above are input, it is likely
that the image can be projected. However, not all functions may be
supported.
Supported Resolutions
Computer Signals (analog RGB)
Signal
VGA
Refresh Rate (Hz)
Resolution (dots)
640 x 480
Component Video
60/72/75/85
Signal
Refresh Rate (Hz)
Resolution (dots)
720 x 480
SVGA
XGA
56/60/72/75/85
800 x 600
SDTV (480i)
SDTV (576i)
SDTV (480p)
SDTV (576p)
HDTV (720p)
HDTV (1080i)
60
50
60/70/75/85
1024 x 768
1280 x 768
1366 x 768
1280 x 800
1440 x 900
1600 x 900
1152 x 864
1280 x 1024
1280 x 960
1400 x 1050
1680 x 1050
1600 x 1200
640 x 480
720 x 576
WXGA
60
60
60
720 x 480
50
720 x 576
60/75/85
60/75/85
60
50/60
50/60
1280 x 720
1920 x 1080
WXGA+
WXGA++
SXGA
70/75/85
60/75/85
60/75/85
60/75
60
Composite Video
Signal
Refresh Rate (Hz)
Resolution (dots)
720 x 480
SXGA+
TV (NTSC)
TV (SECAM)
TV (PAL)
60
50
*1,2
WSXGA+
UXGA
720 x 576
60
50/60
720 x 576
MAC13"
MAC16"
MAC19"
67
75
832 x 624
Input Signal from the HDMI Port
75
1024 x 768
1024 x 768
1152 x 870
59
Signal
VGA
Refresh Rate (Hz)
Resolution (dots)
640 x 480
MAC21"
75
60
60
60
60
60
SVGA
XGA
800 x 600
*1 EB-536Wi/EB-535W/EB-525W only.
*2 Only compatible when Wide is selected as the Resolution from the
1024 x 768
1280 x 800
1366 x 768
Configuration menu.
WXGA
Supported Monitor Displays
177
Signal
Refresh Rate (Hz)
Resolution (dots)
1440 x 900
1600 x 900
1280 x 960
1280 x 1024
1400 x 1050
1600 x 1200
1680 x 1050
720 x 480
WXGA+
WXGA++
60
60
60
SXGA
60
SXGA+
UXGA
60
60
*
WSXGA+
60
SDTV (480i/480p)
SDTV (576i/576p)
HDTV (720p)
60
50
720 x 576
50/60
50/60
24/30/50/60
1280 x 720
1920 x 1080
1920 x 1080
HDTV (1080i)
HDTV (1080p)
*
EB-536Wi/EB-535W/EB-525W only.
178
Specifications
Projector General Specifications
EB-536Wi
EB-535W
EB-525W
EB-530
EB-520
Product name
Dimensions
344 (W) x 94 (H) x 314.5 (D) mm (not including the feet)
0.59" Wide
0.55"
LCD panel size
Display method
Resolution
Polysilicon TFT active matrix
1,024,000
WXGA (1280 (W) x 800 (H) dots) x 3
786,432
XGA (1024 (W) x 768 (H) dots) x 3
Manual
Focus adjustment
Zoom adjustment
Lamp
Digital (1-1.35)
UHE lamp, 215 W Model No.: ELPLP87
UHE lamp, 200 W
Model No.: ELPLP87
UHE lamp, 215 W
Model No.: ELPLP87
UHE lamp, 200 W
Model No.: ELPLP87
16 W
1
Max. audio output
Speaker
100 - 240 V AC 10% 50/60 Hz 3.2 - 1.4 A 100 - 240 V AC 10% 100 - 240 V AC 10% 100 - 240 V AC 10%
Power supply
50/60 Hz 3.0 - 1.3 A
50/60 Hz 3.2 - 1.4 A
50/60 Hz 3.0 - 1.3 A
Operating: 315 W
Standby power
consumption
(Communication On):
1.90 W
Operating: 315 W
Standby power
consumption
(Communication On):
1.90 W
Operating: 293 W
Operating: 315 W
Operating: 293 W
Power con 100 to 120 V area
sumption
Standby power
consumption
Standby power
consumption
Standby power
consumption
(Communication On):
(Communication On):
(Communication On):
1.90 W
1.90 W
1.90 W
Standby power
Standby power
Standby power
consumption
(Communication Off):
0.22 W
Standby power
consumption
(Communication Off):
0.22 W
Standby power
consumption
(Communication Off):
0.22 W
consumption
consumption
(Communication Off):
0.22 W
(Communication Off):
0.22 W
Specifications
179
Operating: 230 W
Operating: 230 W
Operating: 229 W
Operating: 230 W
Operating: 229 W
220 to 240 V area
Standby power
consumption
(Communication On):
2.10 W
Standby power
consumption
(Communication On):
2.10 W
Standby power
consumption
(Communication On):
2.10 W
Standby power
consumption
(Communication On):
2.10 W
Standby power
consumption
(Communication On):
2.10 W
Standby power
Standby power
Standby power
Standby power
Standby power
consumption
consumption
consumption
consumption
consumption
(Communication Off):
0.28 W
(Communication Off):
0.28 W
(Communication Off):
0.28 W
(Communication Off):
0.28 W
(Communication Off):
0.28 W
Altitude 0 to 3,000 m
Operating altitude
+5 to +35°C (No condensation) (Altitude 0 to 2,286 m)
+5 to +30°C (No condensation) (Altitude 2,287 to 3,000 m)
Operating temperature
-10 to +60°C (No condensation)
Storage temperature
Mass
Approx. 3.9 kg
Approx. 3.7 kg
Approx. 3.7 kg
Approx. 3.7 kg
Approx. 3.7 kg
Specifications
180
Mini D-Sub15-pin (female)
Mini D-Sub15-pin (female)
RCA pin jack
Connectors
Computer1 port
Computer2 port
Video port
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
Mini DIN 4-pin
S-Video port
Audio1 port
Audio2 port
Audio-L/R port
Mic port
Stereo mini jack
Stereo mini jack
RCA pin jack x 2 (L-R)
Stereo mini jack
Stereo mini jack
Audio Out port
Monitor Out port
HDMI port
Mini D-Sub15-pin (female)
HDMI (Audio is only supported by PCM)
USB connector (Type A)
USB connector (Type B)
RJ-45
USB-A port*1
USB-B port*1
LAN port
Mini D-Sub 9-pin (male)
Stereo mini jack
RS-232C port
SYNC port*2
*1 Supports USB 2.0. However, USB ports are not guaranteed to operate all devices that support USB.
*2 EB-536Wi only.
Specifications
181
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
Angle of tilt
If you use the projector tilted at an angle of more than 8Ëš it could be damaged and cause an accident.
Specifications
182
FCC Compliance Statement
For United States Users
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio
and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
CPU Boards and Power Supplies used with Class B Personal Computers
We:
Located at:
Epson America, Inc.
3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
562-981-3840
Tel:
Declare under sole responsibility that the product identified herein,
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue
to reflect the equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on a statistical
basis as required by 47CFR 2.909. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
Trade Name:
Type of Product:
Model:
EPSON
The connection of a non-shielded equipment interface cable to this
equipment will invalidate the FCC Certification or Declaration of this
device and may cause interference levels which exceed the limits established
by the FCC for this equipment. It is the responsibility of the user to obtain
and use a shielded equipment interface cable with this device. If this
equipment has more than one interface connector, do not leave cables
connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate the
equipment.
LCD Projector
H598C/H599C/H600C/H601C/H602C/H603C/
H604C/H605C
Specifications
183
FCC Statement for Verification
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
184
Appearance
344
113.9
Center of lens
A
B
Measurements from the center of the lens to the wall mount plate fixing points or
the ceiling mount fixing points.
Measurements from the front of the projector to the front of the lens.
C
Appearance
185
185.9
156
128
8
127
137
55.9
5-M4 x 9
242
Units: mm
186
Glossary
This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications.
A method of wireless LAN connection that communicates with wireless LAN clients without using an access point.
Ad hoc mode
AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
See the AMX Web site for more details.
AMX Device Discovery
URL http://www.amx.com/
The ratio between an image's length and its height. Screens with a horizontal:vertical ratio of 16:9, such as HDTV screens, are known as wide screens.
SDTV and general computer displays have an aspect ratio of 4:3.
Aspect Ratio
A method that separates the video signal into a luminance component (Y), and a blue minus luminance (Cb or Pb) and a red minus luminance (Cr or
Pr).
Component Video
A method that combines the video signal into a luminance component and a color component for transmission down a single cable.
Composite video
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased to make text and graphics stand out more clearly, or to
make them appear softer. Adjusting this particular property of an image is called contrast adjustment.
An abbreviation of Dynamic Host Configuration Protocol, this protocol automatically assigns an IP address
g
to equipment connected to a network.
DHCP
This is a server (router) for communicating across a network (subnet) divided according to subnet mask
g
.
Gateway Address
HDCP
HDCP is an abbreviation for High-bandwidth Digital Content Protection. It is used to prevent illegal copying and protect copyrights by encrypting
digital signals sent over DVI and HDMI ports. Because the HDMI port on this projector supports HDCP, it can project digital images protected by
HDCP technology. However, the projector may not be able to project images protected with updated or revised versions of HDCP encryption.
An abbreviation for High-Definition Television that refers to high-definition systems which satisfy the following conditions.
HDTV
• Vertical resolution of 720p or 1080i or greater (p = Progressive
g, i = Interlaceg)
• Screen aspect ratio of 16:9
g
A method for wireless LAN connection in which devices communicate through access points.
Infrastructure mode
Interlace
Transmits information needed to create one screen by sending every other line, starting from the top of the image and working down to the bottom.
Images are more likely to flicker because one frame is displayed every other line.
A number to identify a computer connected to a network.
IP Address
Projects information to create one screen at a time, displaying the image for one frame. Even though the number of scan lines is the same, the amount
of flicker in images decreases because the volume of information has doubled compared with an interlace system.
Progressive
The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be
scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh rate and is
expressed in hertz (Hz).
Refresh Rate
Glossary
187
An abbreviation for Standard Definition Television that refers to standard television systems which do not satisfy the conditions for HDTV
Definition Television.
g
High-
SDTV
SNMP
sRGB
An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and
computers connected to a TCP/IP network.
An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by
computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source
to sRGB.
SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices that correspond
to SSID.
SSID
This is a numerical value that defines the number of bits used for the network address on a divided network (subnet) from the IP address.
A screen size standard with a resolution of 800 (horizontal) x 600 (vertical) dots.
Subnet Mask
SVGA
S-Video
SXGA
Sync.
A method that separates the video signal into a luminance component (Y) and a color component (C).
A screen size standard with a resolution of 1,280 (horizontal) x 1,024 (vertical) dots.
The signals output from computers have a specific frequency. If the projector frequency does not matchthis frequency, the resulting images are not of
a good quality. The process of matching the phases of these signals (the relative position of the crests and the troughs in the signal) is called
Synchronization. If the signals are not synchronized, flickering, blurriness, and horizontal interference occur.
The signals output from computers have a specific frequency. If the projector frequency does not matchthis frequency, the resulting images are not of
a good quality. The process of matching the frequency of these signals (the number of crests in the signal) is called Tracking. If Tracking is not carried
out correctly, wide vertical stripes appear in the signal.
Tracking
This is the IP address
g
for the destination computer used for error notification in SNMP.
Trap IP Address
A screen size standard with a resolution of 640 (horizontal) x 480 (vertical) dots.
A screen size standard with a resolution of 1,024 (horizontal) x 768 (vertical) dots.
VGA
XGA
188
General Notes
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko
Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. Neither is any liability assumed for damages resulting
from the use of the information contained herein.
Wireless Telegraphy Act Regulations
The following acts are prohibited by the Wireless Telegraphy Act.
• Modifying and disassembling (including the antenna)
• Removing the label of conformance
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the
purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation's operating and
maintenance instructions.
About Notations
Microsoft Windows 2000 operating system
®
®
Microsoft Windows XP operating system
®
®
Microsoft Windows Vista operating system
®
®
Microsoft Windows 7 operating system
Seiko Epson Corporation shall not be liable against any damages or problems arising
from the use of any options or any consumable products other than those designated as
Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
®
®
Microsoft Windows 8 operating system
®
®
Microsoft Windows 8.1 operating system
®
®
In this guide, the operating systems above are referred to as "Windows
2000", "Windows XP", "Windows Vista", "Windows 7", "Windows 8", and
"Windows 8.1". Furthermore, the collective term Windows may be used to
refer to Windows 2000, Windows XP, Windows Vista, Windows 7,
Windows 8, and Windows 8.1, and multiple versions of Windows may be
referred to as, for example, Windows 2000/XP/Vista/7/8/8.1, with the
Windows notation omitted.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Restriction of Use
When this product is used for applications requiring high reliability/safety such as
transportation devices related to aviation, rail, marine, automotive etc.; disaster
prevention devices; various safety devices etc; or functional/precision devices etc, you
should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because
this product was not intended for use in applications requiring extremely high
reliability/safety such as aerospace equipment, main communication equipment,
nuclear power control equipment, or medical equipment related to direct medical care
etc, please make your own judgment on this product’s suitability after a full evaluation.
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
OS X 10.7.x
OS X 10.8.x
OS X 10.9.x
In this guide, the operating systems above are referred to as "Mac OS X
10.3.x", "Mac OS X 10.4.x", "Mac OS X 10.5.x", "Mac OS X 10.6.x", "OS X
10.7.x", "OS X 10.8.x", and "OS X 10.9.x". Furthermore, the collective term
"OS X" is used to refer to them all.
General Notes
189
General Notice:
EPSON is a registered trademark, EXCEED YOUR VISION, ELPLP and their logos are
registered trademarks or trademarks of Seiko Epson Corporation.
Mac, Mac OS, and OS X, are trademarks of Apple Inc.
Microsoft, Windows, Windows Vista, PowerPoint, and Windows logo are trademarks
or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
eneloop is a registered trademark of the Panasonic Group.
®
WPA and WPA2 are registered trademarks of Wi-Fi Alliance.
App Store is a service mark of Apple Inc.
â„¢
â„¢
Google play is a trademark of Google Inc.
HDMI and High-Definition Multimedia Interface are the trademarks or registered
trademarks of HDMI Licensing LLC.
PJLink trademark is a trademark applied for registration or is already registered in
Japan, the United States of America and other countries and areas.
Crestron and Crestron RoomView are registered trademarks of Crestron Electronics,
Inc.
All other trademarks are the property of their respective owners and used for
identification purpose only.
©SEIKO EPSON CORPORATION 2014. All rights reserved.
Indication of the manufacturer and the importer in accordance with
requirements of directive 2011/65/EU (RoHS)
Manufacturer: SEIKO EPSON CORPORATION
Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone: 81-266-52-3131
Importer: SEIKO EUROPE B.V.
Address: Azië building, Atlas ArenA, Hoogoorddreef 5, 1101 BA Amsterdam Zuidoost
The Netherlands
Telephone: 31-20-314-5000
190
Index
Battery light .................................................. 20
Blackboard .................................................... 54
Bonjour ....................................................... 132
Brightness ................................................... 116
Button ............................................................ 20
Connecting a LAN cable ............................. 35
Connecting a microphone .......................... 32
Connecting external equipment ................ 33
Connecting image sources .......................... 28
Connecting multiple projectors ................. 38
Connecting USB devices ............................. 30
Connection mode ...................................... 127
Consumables .............................................. 172
Continuous ................................................... 89
Contrast ...................................................... 116
Control panel ......................................... 11, 15
Control Panel Lock .................................... 100
Control panel lock ..................................... 119
Crestron RoomView ......................... 108, 132
Cross .............................................................. 92
A
A/V Mute ................................. 12, 17, 90, 104
A/V Mute Timer ........................................ 134
A/V Output ................................................ 122
A/V Settings ............................................... 122
Adjusting the tilt .......................................... 52
Advanced ............................................ 123, 124
Air exhaust vent ........................................... 12
Air filter ................................................ 11, 172
Air Filter Replacement Period ................. 169
Air intake vent .............................................. 11
AMX Device Discovery ............................ 132
Annotation Mode .................................. 60, 75
Anti-Theft Lock ......................................... 101
Aspect ............................................. 16, 55, 118
Attachment for optional strap or cord ..... 20
Audio Output ............................................. 122
Audio Settings .............................................. 13
Audio1 port .................................................. 12
Audio2 port .................................................. 13
Audio-L/R port ............................................ 12
Auto ............................................................... 16
Auto Calibration .................................. 68, 123
Auto Iris ................................................ 54, 117
Auto Power On .......................................... 121
Auto Setup .................................................. 117
Auto V-Keystone ......................................... 52
Automatic correction .................................. 52
C
Cable Layouts ............................................. 106
Ceiling ......................................................... 121
Ceiling mount ............................................ 172
Ceiling mount fixing points ....................... 14
Ceiling pipe ................................................ 172
Channel ....................................................... 127
Cleaning ...................................................... 163
Cleaning the air filter ................................ 163
Cleaning the Lens ...................................... 163
Cleaning the Projector's Surface .............. 163
Color Adjustment ...................................... 117
Color Mode .................................... 18, 53, 116
Color Saturation ........................................ 116
Color Temp. ............................................... 117
Command List ........................................... 106
Communications Protocol ....................... 107
Component Video ..................................... 176
Component video cable ............................ 172
Composite Video ....................................... 176
Computer ............................................. 16, 104
Computer cable .......................................... 172
Computer Interactive .................................. 62
Computer Port ............................................. 13
Computer Signals ...................................... 176
Configuration menu ......................... 113, 114
Connecting a computer .............................. 26
D
E
Direct Power On ........................................ 121
Display ........................................................ 121
Display Background .................................. 121
Display order ................................................ 89
Display settings ............................................ 89
Document Camera .................................... 172
Dynamic ........................................................ 53
Easy Interactive Driver ............................... 65
Easy Interactive Function ........ 120, 122, 123
Easy Interactive Function receiver ............ 11
Easy Interactive Pen ............................ 19, 172
EasyMP Monitor ....................................... 102
EasyMP Network Projection ...................... 80
ECO Display ............................................... 134
B
Background .................................................. 77
Basic menu ................................................. 126
Battery cover ................................................. 20
Index
191
ECO menu .................................................. 133
H-Keystone Slider ........................................ 51
Horizontal keystone adjuster ..................... 11
Hovering ..................................................... 123
How to Replace the Air Filter .................. 169
How to replace the lamp ........................... 166
Lamp replacement period ........................ 166
Lamp unit ................................................... 172
LAN ....................................................... 18, 104
LAN port ....................................................... 13
Language ..................................................... 122
Lens cover ..................................................... 12
Light Optimizer ......................................... 133
Effect .............................................................. 89
Electronic pen .............................................. 67
Email Address ............................................ 131
Enable Right Click ..................................... 124
Enter ........................................................ 15, 17
Esc ............................................................ 15, 18
ESC/VP21 ................................................... 106
Extended menu .......................................... 120
E-Zoom ................................................... 17, 92
I
Image height ................................................. 52
Image menu ................................................ 116
Image Processing ....................................... 118
Image size ..................................................... 52
Images ................................................. 147, 148
Indicators .............................................. 15, 143
Info menu ................................................... 134
Ink function ............................................ 82, 83
Input Signal ................................................ 118
Input signal ................................................. 135
Installing ........................................... 23, 24, 46
Interactive function ................ 10, 24, 74, 157
Interactive Pen Extension ......................... 172
Interface box ............................................... 172
IP Address .................................................. 131
IP Address Display ............................ 128, 131
IP Settings ........................................... 128, 130
M
Mail Notification ............................... 104, 131
Mail Notification menu ............................ 131
Manual Calibration ............................. 69, 123
Manual corrections ..................................... 49
Menu ....................................................... 15, 16
Message Broadcasting ....................... 102, 132
Messages ..................................................... 121
MHL Menu ................................................... 18
Mic Input Level .......................................... 119
Microphone input port ............................... 12
Monitor Displays ....................................... 176
Monitor Out Port ........................................ 12
Mouse pointer .............................................. 93
F
Flip Horizontal ......................................... 8, 90
Focus .............................................................. 53
Focus ring ..................................................... 11
Foot adjust lever ........................................... 11
Freeze .............................................. 17, 91, 104
Front ...................................................... 23, 121
Front adjustable foot ............................. 11, 14
Full Lock ..................................................... 100
G
H
Gateway Address ............................... 128, 130
N
O
Network Configuration ............................ 125
Network information ........................ 124, 125
Network Menu ........................................... 124
Noise Reduction ........................................ 118
Num ............................................................... 16
Number pad ................................................. 16
K
L
H/V-Keystone .............................................. 49
HDMI .......................................................... 176
HDMI port ................................................... 13
HDMI Video Range .................................. 118
Help ......................................................... 15, 17
Help function ............................................. 142
High Altitude Mode .................................. 121
H-Keystone adjuster .................................... 51
Keystone ...................................................... 119
Keystone distortion ..................................... 48
Lamp cover ................................................... 11
Lamp hours ................................................ 133
Lamp indicator ........................................... 143
Operating range ........................................... 19
Index
192
Operating temperature ............................. 179
Priority Gateway ........................................ 132
Problem Solving ......................................... 143
Progressive .................................................. 118
Projection ................................................... 121
Projection distance ............................ 173, 174
Projection lens .............................................. 11
Projector ................................................. 41, 42
Projector control toolbar ............................ 77
Projector General Specifications ............. 178
Projector Info ............................................. 135
Projector keyword ..................................... 127
Projector Name .......................................... 126
Projector Setup ........................................... 102
Replacing the Air Filter ............................. 169
Replacing the Lamp ................................... 166
Replacing the tip .......................................... 21
Reset ................... 117, 118, 120, 122, 133, 134
Reset all ....................................................... 135
Reset menu ......................................... 133, 135
Resetting the lamp operating time .. 135, 169
Resolution .......................................... 117, 135
Rotating images ........................................... 87
RS-232C ........................................................ 12
Operation .................................................... 121
Optional accessories .................................. 172
Overheating ................................................ 144
Overscan ..................................................... 118
P
Page ....................................................... 17, 104
Part Names and Functions ......................... 11
Passphrase ................................................... 129
Password protect sticker ............................. 99
Password Protection .................................... 98
Pattern ......................................................... 120
PC Free ................................................ 8, 85, 86
Pen ................................................................. 76
Pen Calibration ............................................ 68
Pen input ................................................ 82, 83
Pen Mode .............................................. 18, 123
Pen Mode Icon ........................................... 121
Pen Operation Area ..................................... 71
Pen Operation Mode ................................. 124
Pen tip ........................................................... 20
PJLink .......................................................... 107
PJLink Password ........................................ 126
Pointer ..................................................... 17, 91
Pointer shape .............................................. 119
Port Number .............................................. 131
Position ....................................................... 118
Power .............................................. 15, 16, 104
Power indicator .......................................... 143
Power inlet .................................................... 12
Power On Protection .................................. 98
Presentation .................................................. 54
S
Screen size ................................................... 173
Screen switching time ................................. 89
Search Access Point .......................... 128, 129
Security ........................................................ 129
Security cable installation point ................ 14
Security menu ............................................ 129
Select Drive ................................................... 86
Serial connection ....................................... 106
Settings ........................................................ 137
Settings menu ............................................. 119
Sharpness .................................................... 116
Signal menu ................................................ 117
Sleep Mode ................................................. 134
Sleep Mode Timer ..................................... 134
Slideshow ...................................................... 88
SMTP Server ............................................... 131
SNMP .................................................. 105, 132
Soft carrying case ....................................... 172
Soft keyboard ............................................. 125
Sort Order ..................................................... 89
Source Search .......................... 15, 18, 43, 104
Q
R
Quick Corner ....................................... 49, 119
Quick Wireless Connection USB Key 37, 172
Reading Mail .............................................. 105
Rear ....................................................... 23, 121
Rear feet ........................................................ 14
Rear screen .................................................... 23
Refresh ........................................................ 129
Refresh Rate ................................................ 135
Remote control ............................................ 16
Remote control cable set ........................... 172
Remote control light-emitting area ........... 18
Remote Receiver ........................................ 119
Remote receiver ..................................... 11, 13
Removing USB devices ............................... 31
Replacement Pen Tips .............................. 172
Replacing batteries ................................ 18, 20
Index
193
Speaker .......................................................... 13
USB ........................................................ 18, 104
USB cable .................................................... 138
USB Display .................................................. 45
USB Display/Easy Interactive Function . 122
USB extension cable .................................. 172
USB memory .............................................. 136
USB Storage .................................................. 85
USB Type B ................................................ 122
USB-A port ................................................... 13
USB-B port ................................................... 13
User ................................................................ 17
User button ................................................. 119
User Pattern .................................................. 96
User's Logo ........................................... 95, 121
User's Logo Protection ................................ 98
Wire lock .................................................... 101
Wired LAN Menu ..................................... 130
Wireless LAN menu .................................. 127
Wireless LAN unit ............................... 36, 172
Wireless LAN unit fixing screw ................. 13
Wireless Mode ........................................... 124
Wireless mouse function ............................ 93
Wireless Mouse/USB Display .................. 122
Specifications ............................................. 178
sRGB .............................................................. 54
SSID ............................................................. 128
SSID Auto Setting ...................................... 128
SSID Display ............................................... 128
Standby Mode ............................................ 134
Startup Screen ............................................ 121
Startup Source Search ............................... 121
Status indicator .......................................... 143
Storage temperature .................................. 179
Strap attachment hole ................................. 17
Subnet Mask ....................................... 128, 130
Supported Monitor Displays .................... 176
Supported Resolutions .............................. 176
S-Video Port ................................................. 12
Switching images ......................................... 44
SYNC IN/OUT port .................................... 13
Sync Info ..................................................... 135
Sync. ............................................................ 118
System requirements ................................... 45
Z
Zoom ........................................................... 119
V
Version ........................................................ 135
Video ..................................................... 16, 104
Video Port ..................................................... 12
Video Signal ............................................... 135
Video signal ................................................ 118
Volume ................................... 17, 53, 104, 119
T
Tele ................................................................ 15
Temp indicator .......................................... 143
Theatre .......................................................... 54
Tint .............................................................. 116
Toolbars ...................................................... 121
Tracking ...................................................... 118
Trap IP address .......................................... 132
W
Wall mount ................................................ 172
Wall mount plate fixing points .................. 14
Web Control ...................................... 102, 103
Web Control Password ............................. 126
Web Remote ............................................... 103
When projection starts ............................. 154
Whiteboard Mode ................................. 61, 75
Wide .............................................................. 15
U
Uninstalling .................................................. 47
|
Sterling Power Products Chargenpro Pcn1250 User Manual
Pulsar Battery Charger La00011 User Manual
Powerware 1085 User Manual
Panasonic Cu E15fkr User Manual
MAYTAG MDG30MC2AW User Manual
LG LRE30451S User Manual
LG 55LX340H UF User Manual
HP C40D User Manual
DENON AVR X6300H 02 User Manual
CRAFTSMAN 580.327181 User Manual