EPSON DS 510 User Manual

Non Separation feeding

Use this when scanning special documents such as folded documents,

plastic cards, carrier sheets, and so on.

Scanning is performed without separating the document.

DS-510 User’s Guide

Placing Originals on the Product

Loading Documents

Document specifications

The following table provides a list of the paper you can load into the product.

Paper Size

Measurements

210  297 mm

Paper Thickness

Paper Type

Loading Capacity

50 to 209 g/m²

Plain paper, fine

paper, recycled

paper

50 g/m²: 70 sheets

80 g/m²: 50 sheets

130 g/m²: 30 sheets

209 g/m²: 15 sheets

(The loading capacity

varies depending on the

paper type.)

(8.3  11.7 inches)

Letter

Legal

215.9  279.4 mm

(8.5  11 inches)

215.9  355.6 mm

(8.5  14 inches)

182  257 mm

(7.2  10.1 inches)

148.5  210 mm

(5.8  8.3 inches)

128  182 mm

(5.0  7.2 inches)

105  148.5 mm

(4.1  5.8 inches)

Business card

(horizontal)

210 g/m²

15 sheets

See the following for more information on loading special documents such as plastic cards.

& “Scanning Using Document Capture Pro/Document Capture” on page 25

You cannot load the following documents:

❏

Thermal paper

Coated paper

Document with an uneven surface

Photos

Document with wet ink

DS-510 User’s Guide

Placing Originals on the Product

❏

Ripped, wrinkled, or curled documents

Document with staples or paper clips (which may damage the paper source)

Documents with holes (not including punched holes)

Bound documents

Documents with carbon paper on the back

Non-paper document (such as clear files)

Transparent documents

Glossy documents

Carbon-less paper

Perforated documents

Document with labels or stickers

Important:

c_{Do not feed photos or valuable original artwork into the scanner directly. Misfeeding may wrinkle or damage the}

original. When scanning such originals, make sure you use the carrier sheet (sold separately).

Loading a mixture of documents at different sizes

You can load a mixture of documents at different sizes. When loading documents, follow the notes below.

❏

You can load a mixture of documents from A6 to A4/letter size.

Loadthe documents in the input tray in descending order ofpaper size with the largest at the back and the smallest

at the front.

❏

Load the documents at the center of the input tray with the edges of the documents aligned.

DS-510 User’s Guide

Placing Originals on the Product

❏

Slide the edge guides to fit the edges of the widest document.

Loading documents

Follow the steps below to load the document.

Open and extend the input tray, and then slide out the output tray and raise and extend the central guide.

Slide the edge guides on the input tray all the way out.

DS-510 User’s Guide

Placing Originals on the Product

Make sure that the page separation lever is lowered.

Load only the first page of your documents into the input tray with the printed side facing down and the top

edge facing into the feeder.

Slide the paper into the feeder until it meets resistance.

DS-510 User’s Guide

Placing Originals on the Product

Note:

❏

Load business cards horizontally.

❏

Align the edges of the documents; otherwise a paper jam may occur.

❏

Smooth out the folding lines on the documents before loading them.

Slide the edge guides to fit the edge of the paper.

& “Scanning Using Epson Scan ” on page 26

Loading Cards

Note:

Scan results are not guaranteed for plastic cards with shiny surfaces.

You can load plastic cards with the following specifications into the product.

Type

Plastic card (including embossed cards)

DS-510 User’s Guide

Placing Originals on the Product

Size

56  85.6 mm

(2.1  3.3 inches)

Loading capacity

Loading direction

Horizontal

Paper thickness

Up to 1.24 mm thick (including emboss)

* ISO7810 compliant

Follow the steps below to load a plastic card.

Open and extend the input tray, and then slide out the output tray and raise and extend the central guide.

Slide the edge guides on the input tray all the way out.

DS-510 User’s Guide

Placing Originals on the Product

Raise the page separation lever.

Load the card into the input tray with the printed side facing down and the top edge facing into the feeder. Slide

the card into the feeder until it meets resistance. Then slide the edge guides to fit the edge of the card.

Note:

You can only scan one card at a time.

DS-510 User’s Guide

Placing Originals on the Product

Important:

❏

Do not load plastic cards vertically.

❏

To scan plastic cards, clear Detect Double Feed in Epson Scan. See the Epson Scan Help for details.

This completes the procedure for loading cards. See the following sections for more information on scanning

documents.

& “Scanning Using Document Capture Pro/Document Capture” on page 25

& “Scanning Using Epson Scan ” on page 26

Lower the page separation lever after scanning.

Loading Special Documents

Raise the page separation lever to scan paper that has been folded in half, envelopes, or non-standard size documents.

The following table provides a list of supported paper types and sizes.

Paper type

Measurements

Paper Thickness

50 to 130 g/m²

Loading Capacity

1 sheet

Plain paper, fine paper,

Width: 52 to 215.9 mm

recycled paper (long paper)

Length: 356 to 914.4 mm

Plain paper, fine paper,

50 to 130 g/m²

A6 to 215.9  355.6 mm

recycled paper (folded in half)

Up to 0.38 mm thick

C6: 114  162 mm (standard

size)

Envelope

DL: 110  220 mm (standard

size)

Carrier sheet (sold separately)

A8 to A4

50 to 130 g/m²

* Envelopes with special shapes cannot be loaded. Depending on the envelope type, it may not be fed correctly. Check before

scanning.

Follow the steps below to load a document.

DS-510 User’s Guide

Placing Originals on the Product

Open and extend the input tray, and then slide out the output tray and raise and extend the central guide.

Slide the edge guides on the input tray all the way out.

Raise the page separation lever.

DS-510 User’s Guide

Placing Originals on the Product

Load the documents into the input tray with the printed side facing down and the top edge facing into the

feeder. Slide the paper into the feeder until it meets resistance.

When loading a document that is folded in half, fold it as shown below.

Important:

❏

Do not load the document with the open side facing down.

❏

To scan special documents, clear Detect Double Feed in Epson Scan. See the Epson Scan Help for details.

Thiscompletestheprocedureforloadingdocuments. Seethe followingsectionsformore informationonscanningthe

documents.

DS-510 User’s Guide

Placing Originals on the Product

& “Scanning Using Document Capture Pro/Document Capture” on page 25

& “Scanning Using Epson Scan ” on page 26

Lower the page separation lever after scanning.

Note:

When loading a photo or paper that is an irregular shape, use the carrier sheet (sold separately).

See the following for more information on placing the document in the carrier sheet.

❏

If the document is smaller than A4 size, insert it into the center of the carrier sheet with the side to be scanned facing

down.

❏

If the document is larger than A4 size, fold it in half so that the side to be scanned is facing out, with the right side at the

front.

DS-510 User’s Guide

Basic Scanning

Scanning from the Button

Load the document(s).

& “Assigning a Specified Scanning Setting to a Program” on page 30

Press the ] Start button.

The scanned image is saved to the folder you specified.

The product starts the job assigned on the Job Settings window in Document Capture Pro/Document Capture.

Scanning Using Document Capture Pro/Document

Capture

This section explains basic scanning procedures using Document Capture Pro/Document Capture.

See the Help for details on Document Capture Pro/Document Capture.

Load the document(s).

& “Document Capture Pro (Windows)/Document Capture (Mac OS X)” on page 39

Start Document Capture Pro/Document Capture.

Click

(Scan) icon.

Set all of the items, and then click Scan.

Windows

DS-510 User’s Guide

Basic Scanning

If you want to make detailed settings such as image quality, click Detailed Settings to display the "Epson Scan”

scanner driver screen, and then make the necessary settings.

Mac OS X

To display the EPSON Scan screen, select Displays the EPSON Scan Setup Screen in Scan from the menu.

The scanned document is displayed in Document Capture Pro/Document Capture.

Check the scanned images (pages), and then edit as necessary.

When you have finished checking the image, click the destination icon.

Select each item, and then click OK, Send, or Print.

Note:

(Windows)

On the Save As window, select Apply job separation to sort the documents into separate files by detecting blank

pages or barcodes in your scanned images.

The scanned image is saved to the folder you specified.

Scanning Using Epson Scan

This section explains basic scanning procedures using EPSON Scan.

See the Help for details on Epson Scan.

Note:

Do not use the Fast User Switching function while using your scanner.

DS-510 User’s Guide

Basic Scanning

Load the document(s).

& “How to start” on page 39

Start Epson Scan.

Make settings for each item in Main Settings.

Click Preview.

The Preview window displays the scanned image.

Important:

c_{The first page is ejected and the scanned image is displayed in the preview window. Reload the ejected page, and}

then scan again.

Click Image Adjustment tab, and then make adjustments to the image quality such as the brightness.

See the Help for details on Epson Scan.

Click Scan.

In the File Save Settings window, select the Type setting and click OK.

Note:

If the Show this dialog box before next scan check box is cleared, Epson Scan starts scanning immediately without

displaying the File Save Settings window.

The scanned image is saved to the folder you specified.

DS-510 User’s Guide

Various Types of Scanning

Scanning to SharePoint or Cloud Service

You can upload scanned images to a SharePoint Server or Cloud Service.

Windows

Start Document Capture Pro and scan your document.

& “Scanning Using Document Capture Pro/Document Capture” on page 25 steps 1 to 5

On the Main window of Document Capture Pro, click the destination icon.

See the Help for details on Document Capture Pro.

Make settings for each item, and then click OK.

On the settings window, enter the server’s Address, User Name, and Password, and then click OK.

The image is uploaded to the target server.

Mac OS X

Start Document Capture and scan your document.

& “Scanning Using Document Capture Pro/Document Capture” on page 25 steps 1 to 5

DS-510 User’s Guide

Various Types of Scanning

On the Main window of Document Capture, click the destination icon.

See the Help for details on Document Capture.

Make settings for each item, enter the server’s Address, User Name, and Password, and then click OK.

The image is uploaded to the target server.

Scanning Multiple Documents to Separate Files

(Windows)

This function sorts documents into separate files by using a variety of detection methods such as blank pages or

barcodes inserted between the scanned images.

Load a document into the input tray including indicators, such as blank pages, between the pages where you

want to separate the data.

Start Document Capture Pro and scan your document.

& “Scanning Using Document Capture Pro/Document Capture” on page 25 steps 2 to 6

Select Apply job separation on the Save As window, and then click Separation Settings.

SelecttheseparationmethodandthemethodforspecifyingthefoldernameontheSeparationSettingswindow,

and then click OK.

See the Help for details on Document Capture Pro.

DS-510 User’s Guide

Various Types of Scanning

Make other settings on the Save As window, and then click OK.

Scanned images are saved separately based on the separation method selected.

Assigning a Specified Scanning Setting to a Program

Byregisteringaspecific scanningoperationtoascannerbutton, youcanperform thatoperationbysimplypressingthe

scanner button.

You can also register settings, such as separator processing, save format, and save as/destination.

Start Document Capture Pro/Document Capture.

& “Document Capture Pro (Windows)/Document Capture (Mac OS X)” on page 39

Click

(Settings) icon from the toolbar at the top of the window.

On the Job Management window, click Add or the + icon.

Make settings for Job Name, Scan, Output, and Destination on the job settings window, and then click

OK.

See the Help for details on Document Capture Pro/Document Capture.

Click Event Settings on the Job Management window.

For Mac OS X, click the

icon at the bottom of the screen.

Click the job name to select the job you want to assign from the pull-down menu.

Click OK on the Job Management window.

& “Scanning from the Button” on page 25

Scanning Stitched Images

Stitch Images allowsyouto stitchtogetherbothsides ofadouble-sideddocumentorafoldeddocument, andsavethem

as one sheet.

The following shows how the sheets are stitched together.

DS-510 User’s Guide

Various Types of Scanning

Stitch Image Direction:

Left&Right

Stitch Image Direction:

Top&Bottom

Direction

Document

Double-Sided

Folded

Windows

Load the document.

& “How to start” on page 39

Start Document Capture Pro.

Click the

(Scan) icon.

Click Detailed Settings and display EPSON Scan.

Select Double-Sided from Source on the Main Settings tab.

Select the document size from Size.

Select Top&Bottom or Left&Right from Stitch Images, and then click OK.

Click Scan.

The scanned image is displayed in Document Capture Pro.

DS-510 User’s Guide

Various Types of Scanning

Check the scanned image, and then save it.

& “Scanning Using Document Capture Pro/Document Capture” on page 25 steps 5 to 7

Mac OS X

Load the document.

& “How to start” on page 39

Start Document Capture.

Select Displays the EPSON Scan Setup Screen from the Scan menu.

Click the scan icon and display EPSON Scan.

Select Double-Sided from Source on the Main Settings tab.

Select the document size from Size.

Select Top&Bottom or Left&Right from Stitch Images, and then click Scan.

The scanned image is displayed in Document Capture.

Check the scanned image, and then save it.

& “Scanning Using Document Capture Pro/Document Capture” on page 25 steps 5 to 7

Note:

If the images are not stitched together in the intended direction, check Binding Position (for Double-Sided Scanning) on

the EPSON Scan Configuration screen.

Adjusting the Scanned Image

Epson Scan offers a variety of settings for improving color, sharpness, and other aspects affecting image quality.

DS-510 User’s Guide

Various Types of Scanning

Unsharp Mask

Sharpens the edges of image areas.

Descreening

A ripple or cross-hatch pattern (known as moiré) may appear in a scanned image of a printed

document.

Text Enhancement

Auto Area Segmentation

Dropout

Enhances text recognition when scanning text documents.

Scans text in Black&White and applies grayscale to any images in the document.

Scans without the selected color.

Color Enhance

Enhances the selected color.

DS-510 User’s Guide

Various Types of Scanning

See the Help for details on Epson Scan.

DS-510 User’s Guide

Using the Network Interface Unit

Getting to Know Your Product

Button

PPower button

LCD panel

Function

Turns on/off the Network Interface Unit.

Displays the status, operations, or error messages.

Make product and network settings, or perform maintenance.

Resets the LCD panel to the initial screen.

Cancels scanning.

Setting button

& Reset button

y Stop button

OK/Arrow button

Use the arrow buttons to select an item, and then press OK to confirm the

selection.

] Start button

Startsscanning. Ina network environment, the ]button onthescanner worksthe

same way as clicking Scan in the Document Capture Pro or Epson Scan window.

Connecting a Network Interface Unit

Epson Scan works with the optional Network Interface Unit (B12B808451/B12B808461) to enable direct control of all

features of your scanner in a network environment.

See the User's Guide for more information on setting up the Network Interface Unit.

You can download the User's Guide from the following Website.

<http://support.epson.net/netscan/>

After setting up the Network Interface Unit.

& “Setting Up Client Computers with Epson Scan Settings” on page 36

DS-510 User’s Guide

Using the Network Interface Unit

Setting Up Client Computers with Epson Scan Settings

Make sure your scanner and Network Interface Unit are turned on and working properly. Then follow the steps below

to use the Epson Scan Settings program to enable network scanning.

Note:

(Windows)

Log in as a user with administrator's authority to install the software. If you are asked to enter an administrator's password,

enter the password, and then continue with the operations.

Note:

(Mac OS X)

❏

Do not use the Fast User Switching function while using your scanner.

You must log on to a Computer Administrator account.

Obtain the IP address or host name of the Network Interface Unit from your network administrator.

Start Epson Scan Settings.

Windows:

Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings

Mac OS X:

Select Applications > EPSON Software > EPSON Scan Settings.

Select your scanner from the Select Scanner drop-down list.

DS-510 User’s Guide

Using the Network Interface Unit

Select Network, then click Add.

In the Add window, choose the Network Interface Unit’s IP address under Search for addresses, or select Enter

address and type in the address. Then click OK.

In the Epson Scan Settings window, click Test to check the connection. If everything works properly, a message

indicating successful connection is displayed.

Click OK to save the settings.

Scanning Over a Network

Note:

You must set the IP address for your Network Interface Unit before using it.

& “Setting Up Client Computers with Epson Scan Settings” on page 36

Turn on your scanner, Network Interface Unit and the client computer.

Turn on your scanner and the client computer.

Load the document(s).

Start Document Capture Pro/Document Capture.

& “Document Capture Pro (Windows)/Document Capture (Mac OS X)” on page 39

Click

(Scan) icon on the Document Capture Pro/Document Capture Main window.

DS-510 User’s Guide

Using the Network Interface Unit

Make necessary settings on Main Settings, and then click Scan.

Scanning from the Network Interface Unit (for

Windows)

Setup a Job in advance.

& “Assigning a Specified Scanning Setting to a Program” on page 30

Turn on your scanner, Network Interface Unit and the client computer.

Load the document(s).

Press the OK button on the Network Interface Unit.

The scanner searches for an available computer.

Select the computer you want to send the data to, and then press the OK button.

If a group is set for the scanner, you need to set the same group on the computer if you want to display it on the

panel.

Enter the password.

If the password entry screen is not displayed, go to the next step.

See the Help for details on Document Capture Pro.

Select a job, and then press the OK button.

Check the settings, and then press the ] button on the scanner.

DS-510 User’s Guide

Software Information

Document Capture Pro (Windows)/Document Capture

(Mac OS X)

This software allows you to rearrange pages or correct rotation for image data, and then save the data, send it by e-mail,

send it to a server, or send it to a cloud service.

You can also register frequently used scanning settings to simplify scanning operations.

How to start

❏

Windows:

Select Start > All Programs or Programs > Epson Software > Document Capture Pro.

Mac OS X:

❏

Select Applications > Epson Software > Document Capture.

How to access the help

See the software's Help for more information on using the software and its functions. To display the Help, select Help

from the menu at the top-right of the software screen.

Epson Scan Driver

This software lets you control all aspects of scanning. You can use this as a standalone scanning program or use it with

another TWAIN-compliant scanning program.

How to start

❏

Windows:

Select Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan.

Mac OS X:

❏

Select Applications > Epson Software > EPSON Scan.

How to access the help

Click the Help button on the Epson Scan driver.

DS-510 User’s Guide

Software Information

Another Scanning Software

Presto! BizCard

You can scan business cards and convert them to editable text using the Presto! BizCard software that came with your

scanner.

How to start

❏

Windows:

Select Start > All Programs or Programs > NewSoft > Presto! BizCard > Presto! BizCard.

Mac OS X:

❏

Select Applications > Presto! BizCard > Presto! BizCard.

How to access the help

See thesoftware'sHelpfor more informationonusingthesoftwareanditsfunctions. To displaytheHelp, selectit from

the software's Help menu.

ABBYY FineReader (for Windows)

This OCR software allows you to scan a document and convert the text into data that you can edit with a word

processing program.

OCR software cannot recognize or has difficulty recognizing the following types of documents or text.

❏

Handwritten characters

Items that have been copied from other copies

Faxes

Text with tightly spaced characters or line pitch

Text that is in tables or underlined

Cursive or italic fonts, and font sizes less than 8 points

The document has folds or wrinkled

Follow ABBYY FineReader help for detail instructions.

Note:

ABBYY FineReader may not be included in some countries.

DS-510 User’s Guide

Software Information

How to start

❏

Windows:

Select Start > All Programs or Programs > ABBYY FineReader folder > ABBYY FineReader.

Checking and Installing Your Software

Checking the software installed on your computer

To use the functions described in this User’s Guide, you need to install the following software.

❏

Epson Driver and Utilities

Document Capture Pro/Document Capture

Follow the steps below to check that the software is installed on your computer.

For Windows

Do one of the following:

Windows 8:

Select Control Panel from Settings.

Windows 7/ Windows Vista/ Windows XP:

Select Start and select Control Panel.

Do one of the following:

Windows 8/ Windows 7/ Windows Vista:

Click Uninstall a program from the Programs category.

Windows XP:

Double-click the Add or Remove Programs icon.

Check the list of currently installed programs.

For Mac OS X

Double-click Macintosh HD.

Double-click the Epson Software folder in the Applications folder and check the contents.

Note:

The Applications folder contains software provided by third parties.

DS-510 User’s Guide

Software Information

Installing the software

Insert the software disk that came with your product and select the software you want to install on the Software Select

window.

Uninstalling Your Software

You may need to uninstall and then reinstall your software to solve certain problems or if you upgrade your operating

system.

For Windows

Note:

❏

For Windows 8, Windows 7 and Windows Vista, you need an administrator account and password if you log on as a

standard user.

For Windows XP, you must log on to a Computer Administrator account.

Turn off the product.

Disconnect the product’s interface cable from your computer.

Display the software list.

Windows 8:

Select Control Panel from Select Settings. Select Uninstall a program from the Programs category.

Windows 7/ Windows Vista:

Select Start and select Control Panel. Click Uninstall a program from the Programs category.

Windows XP:

Select Start and select Control Panel. Double-click the Add or Remove Programs icon.

Select the software you want to uninstall from the list displayed.

Uninstall the software.

Windows 8/ Windows 7:

Click Uninstall/Change.

Windows Vista:

Click Uninstall/Change, and then click Continue in the User Account Control window.

Windows XP:

Click Change/Remove.

DS-510 User’s Guide

Software Information

When the confirmation window appears, click Yes.

Follow the on-screen instructions.

A message may appear to prompt you to restart your computer. If so, make sure I want to restart my computer

now is selected, and then click Finish.

For Mac OS X

Note:

❏

To uninstall your software you need to download the Uninstaller.

Access the site at:

http://www.epson.com

Next, select the support section of your local Epson Web site.

❏

To uninstall applications, you must log on to a Computer Administrator account.

You cannot uninstall programs if you log on as a limited account user.

Depending on the application, the Uninstaller may be separated from the Installer.

Quit all running applications.

Double-click the Uninstaller icon in your Mac OS X hard drive.

Select thecheckboxesforthesoftwareyouwanttouninstall, such astheprinterdriverandtheapplication, from

the list displayed.

Click Uninstall.

Follow the on-screen instructions.

If you cannot find the software you want to uninstall in the Uninstaller window, double-click the Applications folder

in your Mac OS X hard drive, select the application you want to uninstall, and then drag it to the Trash icon.

Note:

If you uninstall the scanner driver and the name of your product remains in the Print & Scan (for Mac OS X 10.8 or 10.7) or

Print & Fax (for Mac OS X 10.6 or 10.5) window, select the name of your product and click the - remove button.

DS-510 User’s Guide

Maintenance

Cleaning the Product

To keep your product operating at its best, follow the steps below to clean it periodically.

Important:

❏

Never use alcohol, thinner, or corrosive solvent to clean the product. These chemicals can damage the product

components and the case.

❏

Be careful not to spill liquid into the product mechanism or electronic components. This could permanently

damage the mechanism and circuitry.

❏

Do not spray lubricants to the product.

Never open the product case.

Turn off the product.

Unplug the AC adapter from the product.

Wipe off any dirt on the outer case with a soft cloth.

Note:

If the case is very dirty, dampen a soft cloth with water and wring it well, and then wipe off any remaining stains.

After that, use a soft dry cloth to wipe the case.

Cleaning inside the scanner

When scanned images have streaks or when scanned documents become dirty, clean inside the scanner.

Important:

❏

Do not place too much force on the glass surface inside the product.

❏

Be careful not to scratch or damage the glass surface inside the product, and do not use a hard or abrasive brush to

clean it. A damaged glass surface can decrease the scan quality.

❏

Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner

components and the case.

Be careful not to spill liquid into the scanner mechanism or electronic components. This could permanently

damage the mechanism and circuitry.

Do not spray lubricants inside the scanner.

Turn off the product.

DS-510 User’s Guide

Maintenance

Unplug the AC adapter from the product.

Pull the cover open lever and open the scanner cover.

Use a soft cloth to wipe off any stains on the roller on the Scanner cover side.

Wipe off any stains on the pickup roller.

Plug the AC adapter, and then turn on the scanner.

DS-510 User’s Guide

Maintenance

Wipe off any stains on the four rollers on the bottom.

Hold down the ]button for at least two seconds. Press the ]button several times to rotate the roller and wipe

off any stains on the roller.

Turn off the product. Unplug the AC adapter from the product.

Wipe off any stains on the glass surface.

Make sure that dust does not build up on the glass surface. Dust can cause spots and straight lines in your

scanned images.

Important:

c_{Do not spray glass cleaner directly on the glass surface.}

Close the Scanner cover.

Note:

If the case is very dirty, dampen a soft cloth with water and wring it well, and then wipe off any remaining stains.

After that, use a soft dry cloth to wipe the case.

DS-510 User’s Guide

Maintenance

Replacing the Roller Assembly Kit

You need to replace the parts on the Roller Assembly Kit after scanning every 100,000 times.

Removal part

Roller Assembly Kit

Part number

B12B813561

Number of scanning

100,000

To replace the Roller Assembly Kit, follow the steps below.

Turn off the scanner.

Unplug the AC adapter from the product.

Pull the cover open lever and open the scanner cover.

Press the hook on the right side of the pickup roller cover, and then open the cover.

DS-510 User’s Guide

Maintenance

Important:

c_{Do not place too much force on the arm when replacing the pickup roller. Doing so may break the arm.}

Slide and remove the installed pickup roller.

Attach the new lower pickup roller in the correct position.

Align the notches.

DS-510 User’s Guide

Maintenance

Attach the new upper pickup roller in the correct position.

Align the notches, and check that the smaller roller is on the bottom.

Important:

c_{Do not touch the surface of the roller.}

Close the pickup roller cover.

If you cannot close the cover, check that you have performed steps 6 and 7 correctly.

Press in the hooks on up sides of the separation roller cover, and then open the cover.

Important:

c_{Do not apply too much force when opening the cover. Doing so may break the cover.}

DS-510 User’s Guide

Maintenance

Slide and remove the installed separation roller.

Remove the roller from the axis.

Attach the new separation roller to the axis, and make sure the notches align.

Check that there are no gaps. Make sure the roller does not come off the axis.

Attach the new separation roller to the correct position. Make sure the notches align.

DS-510 User’s Guide

Maintenance

While pressing the roller, close the separation roller cover.

If you cannot close the cover, check that you have performed step 11 correctly.

Close the scanner cover.

Plug the AC adapter, and then turn on the scanner.

Start Epson Scan Settings.

Windows:

Start > All Programs or Programs > EPSON > EPSON Scan > Epson Scan Settings.

Mac OS X:

Select Applications > EPSON Software > EPSON Scan Settings.

Click Maintenance.

Click Reset, and then click OK.

Important:

c_{Make sure you reset the counter after replacing the Roller Assembly Kit.}

Energy Saving

The product turns off automatically if no operations are performed for the selected period. You can adjust the time

before power management is applied. Any increase will affect the product's energy efficiency. Consider the

environment before making any changes.

Follow the steps below to adjust the time.

Start Epson Scan Settings.

Windows:

Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings.

DS-510 User’s Guide

Maintenance

Mac OS X:

Select Applications > EPSON Software > EPSON Scan Settings.

Click Energy Saving.

Set the Sleep Timer or Power Off Timer, and then click OK.

Note:

If you want to turn off the Power Off Timer, set it to 0.

Transporting the Product

Turn off the product, then unplug the AC adapter.

Disconnect the USB cable from the product.

Close the input tray and output tray.

Important:

c_{Make sure you close the output tray securely; otherwise it may be damaged during transport.}

Attach the packing materials that came with the product, then repack the product in its original box or a similar

box that fits the product snugly.

Using Security Slot

The security slot is compatible with the Microsaver Security System manufactured by Kensington.

See the following for more details on the Microsaver Security System.

DS-510 User’s Guide

Maintenance

& http://www.kensington.com/

Updating the Firmware

Check the Epson home page for the latest firmware update releases. If there is no firmware information on the home

page, you are already using the latest firmware.

& http://www.epson.com

Important:

c_{Do not turn off the product while the firmware is updating. Otherwise, the firmware may not be updated correctly.}

DS-510 User’s Guide

Troubleshooting

Problems Indicated by status light

❏

Make sure the scanner cover is closed.

Make sure there is no jammed paper.

Make sure the product is connected to your computer properly.

Turn off the product and turn it on again. If the problem is not solved, the product may be malfunctioning, or the

light source in the scanner unit may need to be replaced. Contact your dealer.

❏

Contact your dealer if you cannot clear the error.

Problems When Starting a Scan

❏

Make sure the scanning software is fully installed.

See the paper manual for instructions on installing the scanning software.

❏

Check the status light and make sure the product is ready to scan.

Make sure your cables are securely connected to the product and a working electrical outlet.

Check that the electrical outlet is working. Plug another device into the electrical outlet and check that you can

turn the power on.

❏

Turn off the product and computer, and then check the interface cable connection between them to make sure it is

secure.

❏

Make sure you select the correct product if a scanner list is displayed when starting to scan.

Connect the product directly to the computer’s external USB port or through one USB hub only. The product may

not work properly when connected to the computer through more than one USB hub. If the problem persists, try

connecting the product directly to the computer.

❏

If more than one product is connected to your computer it may not work. Connect only the product you want to

use, and then try scanning again.

If the scanning software does not work properly, uninstall the software first and then reinstall it as described in the

paper manual.

& “Uninstalling Your Software” on page 42

❏

If the light source has reached the end of its service life, it must be replaced by a professional. For details, contact

your dealer.

& “Contacting Epson Support” on page 62

DS-510 User’s Guide

Troubleshooting

❏

Mac OS X:

For Macintosh computers with Intel CPUs, the scanner driver you are using may not operate correctly if other

Epson scanner drivers (Rosetta/PPC editions) are installed.Remove the other drivers, and then install the scanner

driver you want to use.

Using the button

Depending on the product, the scanning function may not be available when using the button.

❏

Check if you have assigned a program to the button.

& “Assigning a Specified Scanning Setting to a Program” on page 30

Check that compatible scanning software is installed.

& “Checking the software installed on your computer” on page 41

Windows:

IfyouhaveclickedtheKeepBlocking buttonintheWindowsSecurityAlertwindowduringorafterinstallationof

the Epson Software, unblock Document Capture Pro.

& “How to unblock Document Capture Pro” on page 56

❏

Mac OS X:

Make sure you are logged on as the user who installed the scanning software. Other users must first start Epson

Scanner Monitor in the Applications folder and then press a button to scan.

Using the Network Interface Unit

❏

Check that the Network Interface Unit is installed correctly.

& See the Network Interface Unit User’s Guide for more details.

❏

Check that the network cable is connected securely.

& See the Network Interface Unit User’s Guide for more details.

❏

Check that the network cable is working correctly by connecting it to other products.

Check that the scanning software has been installed correctly.

& “Checking and Installing Your Software” on page 41

❏

Check that the scanner used with the scanning software has been selected.

& See the help came with each software for more details.

Check that Epson Scan Settings have been set correctly.

& “Setting Up Client Computers with Epson Scan Settings” on page 36

Check that Network Scanning Settings from Document Capture Pro/Document Capture have been set correctly.

& See the help came with each software for more details.

In Network Scanning Settings, check that the Group settings for Document Capture Pro are the same as the

settings for Network Interface Unit.

& See the Document Capture Pro help for more details.

& See the Network Interface Unit User’s Guide for more details.

DS-510 User’s Guide

Troubleshooting

❏

Check that Document Capture Pro is not being blocked by a Firewall.

& “How to unblock Document Capture Pro” on page 56

Check that the IP address for the scanner being used is set correctly.

& “Setting Up Client Computers with Epson Scan Settings” on page 36

How to unblock Document Capture Pro

Display the Control Panel.

Windows 8:

Select Control Panel from Settings.

Windows 7/ Windows Vista/ Windows XP:

Select Start and select Control Panel.

Display the Firewall settings window.

Windows 8/ Windows 7:

Select System and Security.

Select Allow a program through Windows Firewall.

Windows Vista:

Select Security.

Select Allow a program through Windows Firewall.

Windows XP:

Select Security Center.

Select Windows Firewall.

Select EEventManager Application from the list.

Epson Event Manager is installed with Document Capture Pro.

Windows 8/ Windows 7:

Confirm that the check box for EEventManager Application is selected in the Allowed programs and features

list.

Windows Vista:

Click the Exceptions tab, and then confirm that the check box for EEventManager Application is selected in

the Program or port list.

Windows XP:

Click the Exceptions tab, and then confirm that the check box for EEventManager Application is selected in

the Programs and Services list.

Click OK.

Using scanning software other than Epson Scan driver

❏

IfyouareusinganyTWAIN-compliant programs, suchasAdobePhotoshopElements, makesure thatthecorrect

product is selected as the Scanner or Source setting.

DS-510 User’s Guide

Troubleshooting

❏

If you cannot scan using any TWAIN-compliant scanning programs, such as Adobe Photoshop Elements,

uninstall the TWAIN-compliant scanning program and then reinstall it.

& “Uninstalling Your Software” on page 42

Problems When Feeding Paper

The paper gets dirty

Clean the interior of the product.

& “Cleaning inside the scanner” on page 44

Multiple sheets of paper are fed

❏

Make sure the page separation lever is lowered.

❏

If you load unsupported paper, the product may feed more than one sheet of paper at a time.