In the box
Location of controls
Inserting Micro SD card
Insert the included 8GB Micro SD card into your SmartCam’s Micro
Installing camera
1. Plug the USB cable into the back of the camera.
Reset camera
1. Insert the reset pin into the reset button on the back of the camera
SD card slot. (SmartCam supports up to 32GB of storage.)
as shown below.
1
6
2. Attach the other end of the cable into the included adaptor to
connect to a power outlet, or plug the USB cable directly into a
computer.
5
2. Press and hold the pin down for 5 seconds.
8GB
3. Wait for the camera to reboot and for the LED indicator to start
blinking rapidly.
Micro SD card
SmartCam
2
3
SmartCam
Adaptor
7
User Guide
EVC510
8
4
Micro SD card
USB cable
User Guide
FRONT
BACK
Power outlet
LED indicator
Camera
Micro SD card slot
Speaker
1
2
3
4
5
6
7
8
USB Cable
Reset Pin
Adaptor
3. Wait 30 seconds for the camera to boot up.
Keep your camera unplugged when inserting or ejecting a
Micro SD card.
Microphone
Magnet base
Reset button
Micro USB port
4. Camera must be reset after it starts up for the first time (see “Reset
camera” on the right). If this is not the first time booting the camera,
skip this step.
User Guide
Reset pin
EVC510
Metal base
Anchors & screws
Downloading SmartCam Pro app Setting up the camera
Open the App Store or Google Play store on your device and search
App features
Camera list
Live camera feed
for “SmartCam Pro”, then download and install the app.
A preview of your SmartCam will appear on the home screen.
View and hear your SmartCam’s live camera feed directly from your
device. The Live camera feed can be viewed from several connected
devices simultaneously.
Camera list
Add a camera
Connecting
Refresh all the camera previews at once
Is the blue indicator light flashing rapidly?
Connecting to Wi-Fi...
5. Wait for your camera to connect to
the Wi-Fi network. If your camera
fails to connect, reset the camera
and repeat all the steps.
The SmartCam Pro app is compatible with:
Camera list
Before proceeding, make sure your
• iOS 6.0 and later
3. Make sure the blue LED indicator is
blinking rapidly before connecting.
If it is not, reset your camera (see
“Reset camera”).
Live camera feed
device is connected to a Wi-Fi
• Android 2.2 and later
Camera 1
network.
Camera list
Camera 1
Tap to change resolution
Status: Online
Condition: Good
SmartCam Pro
HD
Display: 1280X720
HD
1280X720
1. After installing SmartCam Pro,
launch the app and tap “Add a
camera.”
2%
SD
640X360
No
Yes
Refresh, edit, or remove a camera.
Camera 2
Connect camera to Wi-Fi
Setup
Local album
6. After a successful connection, you
Recording history
will be prompted to create a name
and password for your camera.
Tap the preview screen to view
the live camera feed.
Enter the Wi-Fi name and password that
your device is connected to.
Please name the camera and create a
2. Select “Set up camera.”
4. The name of the Wi-Fi network will
automatically be filled in. Enter the
Wi-Fi password or leave it blank if
there is none, then tap “Next.”
password.
Set up camera
Wi-Fi name
Camera name: Camera 1
Access camera settings
Take snapshots
Record videos
Your password must meet the
following requirements:
Set up a new camera, or relocate an existing
camera to a new Wi-Fi network.
Wi-Fi password
Password:
••••••••
View Recording history &
Local albums
Password must be at least
8
characters
and include an uppercase letter,
a
lowercase letter, and
a
number.
Reconnect your camera
- At least 8 characters long
- Contain a number
- Contain an uppercase letter
- Contain a lowercase letter
Use camera microphone
Rotate your device to view your camera in landscape mode.
Connect or search for an existing camera.
Confirm
password:
If your camera is disconnected, reconnect the camera and wait
for the blue LED indicator to remain constant.
Next
Finish
FRONT
|