P r o f e s s i o n a l J u i c e E x t r a c t o r
Model: CL-851
INSTRUCTIONS MANUAL
FOR PROPER USE AND CARE
(SAVE THIS INSTRUCTION)
FEATURES & PARTS IDENTIFICATION, CONTINUED
7. Operating Switch (3 positions)
Two operating speeds (LO / HI) and Off positions. Low speed is for
extracting soft fruits with high water content such as watermelon. High
speed is for extracting hard fruits and vegetables.
8. Rubber feet
Keeps the juicer from slipping or moving.
9. Extractor Filter Holder (dishwasher safe)
10. Juice Outlet Spout
11. Juice jug with slide-in Froth Separator (3 parts / dishwasher safe)
•
•
800 cc (0.8L) juice jug
The Juice jug lid eliminates splattering during operation. Use the lid
with the jug for storing juice in refrigerator.
•
Slide-in Froth separator removes froth from juice when pouring.
12. Motor Base
13. Extractor Filter (dishwasher safe)
14. Cleaning Brush
IMPORTANT SAFEGUARDS
R e a d a l l o f t h e i n s t r u c t i o n s b e f o r e u s i n g :
ꢀ Never allow children to use this appliance. Close supervision is necessary
when the appliance is used near children.
ꢀ Do not allow the cord hang over the edge of table or counter; or come in
contact with hot surfaces.
ꢀ Make sure the appliance is OFF before unplugging from wall outlet.
ꢀ Always unplug before cleaning and removing parts.
ꢀ This appliance is for household use only
ꢀ Do not use harsh, abrasive or caustic cleaners to clean this appliance.
ꢀ Never immerse the motor base, cord and plug in water or any other liquid to
protect against electrical hazards.
ꢀ Do not make any modifications to the appliance or connection cord. Do not
attempt to change the connection cord yourself. Contact Sunpentown
customer service for any service issues.
ꢀ Use the appliance on a secure, dry and leveled surface.
ꢀ Switch off, unplug and allow moving parts to stop completely before
removing or replacing attachments
ꢀ Never insert your fingers, utensils or any other object into the juice
extractor feeding tube other than the food pusher.
ꢀ Do not attempt to remove or replace any attachments while the appliance is
in operation.
CLEANING INSTRUCTIONS
ALWAYS make sure the appliance is turned off and unplugged before
cleaning.
Before using this appliance for the first time, wash the Extractor Filter,
Extractor Filter Holder, Lid with feed chute, Pusher, Pulp Collector and the
Juice jar with hot, soapy water. Rinse and dry thoroughly. Using a damp cloth,
wipe appliance and dry thoroughly.
WARNING! Take great care when handling the Extractor Filter, as the blades
on its surface are very sharp.
ASSEMBLY AND USE
WARNING! Before assembly, ALWAYS make sure the appliance is turned off
and power is disconnected from the wall socket.
ꢀ Place the Filter Holder on the motor unit. Align the indentation under the
spout to that on the motor. (With the unit’s control facing you, the spout
should be pointing right)
ꢀ Place the extractor filter in the middle of the filter holder. Rotate the micro
filter and press firmly into place.
ꢀ Place the top cover on the filter holder. Position the pulp removal opening in
place with the holder. (The pulp removal opening should face the opposite
side of the spout.)
ꢀ Lock the top cover in place. Raise the Locking Arms, position the top clip
into indentation on cover and press down firmly. Make sure both locking
arms are clicked securely into place, otherwise the appliance will not work.
ꢀ Place the juice jug under the spout.
ꢀ Place the pulp container under the pulp removal opening.
NOTE: The appliance will not operate unless both top cover and the locking
arms are fitted correctly.
OPERATING INSTRUCTIONS
ꢁ If using fruit with hard or inedible skins such as mangoes, melons or
pineapple, always remove skin before juicing.
ꢁ Citrus fruit can be juiced in the Juice Extractor if peeled first.
ꢁ All fruits with pits, hard seeds or stones such nectarines, peaches,
mangoes, apricots, plums and cherries must be pitted before juicing.
ꢁ A small amount of lemon juice can be added to apple juice to prohibit
browning.
1. Make sure the control is in the OFF (center) position before connecting
power.
2. Turn the power switch to Low or High speed, depending on the type of fruit
or vegetable being juiced.
3. Place food into the Feed Chute, using the Food Pusher, gently guide food
down the Feed Chute. To extract the maximum amount of juice, always
push the Food Pusher down SLOWLY.
4. Juice will flow into the Juice jug through the Juice Outlet Spout and the
separated pulp will accumulate in the Pulp Container. Always watch the
level of juice in the juice jug. Do not overfill, as juice will continue to drip
from the juice spout after you have stopped juicing. Switch off the appliance
and allow the dripping to stop before removing the juice jug.
5. When juicing very soft fruits such as strawberries, peaches etc. you may
find that they are juiced as soon as they hit the Extractor Filter.
Speed Selector Table:
High Speed
Low Speed
Apple, Beetroot, Brussels sprouts,
Carrot, Celery, Fennel, Orange,
Pineapple, Pear (for hard)
Apricot, Blueberries, Broccoli,
Cabbage, Cauliflower, Cucumber,
Watermelon, Grape, Kiwi Fruit,
Mango, Melon, Nectarines, Peach
(for soft), Plum, Raspberry, Tomato,
NOTE: To minimize cleaning, line the pulp container with plastic bag to collect
the pulp.
CARE AND MAINTENANCE
It is important to thoroughly clean the unit after each use to avoid build up of
food residue.
ꢀ Set the power switch to OFF and wait until the motor comes to a complete
stop. With dry hands, unplug the power cord from electrical outlet.
ꢀ Do not immerse the Motor Base in water. Wipe the motor housing with a
soft, damp cloth or sponge. Do not spray with water or any other liquid.
ꢀ For easy cleaning – immediately, after each use, rinse removable parts
under running water (to remove wet pulp).
ꢀ After disassembling the unit, all removable parts may be washed in hot
soapy water.
ꢀ Always treat the Extractor Filter with care as it can be easily damaged and
the blades on its surface are very sharp.
ꢀ For consistent juicing results always ensure that the stainless steel
extractor filter is thoroughly cleaned using the supplied nylon brush. Hold
the filter under running water and brush the filter from the inside of the
basket to the outer rim. After cleaning the extractor filter, hold it up towards
a light to ensure the fine mesh holes are not blocked. If the holes are
blocked, soak the extractor filter in hot water with 10% lemon juice to
loosen the blocked holes. Alternatively wash the extractor filter in the top
shelf of any dishwasher.
ꢀ Some vegetables, such as carrots, may cause discoloration to the plastic.
This may be reduced by immediately washing after use. To remove
discoloration, use a suitable, non-abrasive cleaner on a soft cloth.
ꢀ Dry all parts thoroughly, then assemble the juice extractor and turn the
power ON to spin out any excess water in the filter and receptacle.
ꢀ When the unit and parts are completely dry, store in a cool, dry place.
NOTE: If pulp is left to dry on the extractor filter, it may clog the fine pores of
the filter, thus decreasing the effectiveness of the juicer. To assist with cleaning,
soak the filter in hot soapy water for 10 minutes immediately after use.
Technical details:
Model No.: CL-851
Power supply: 110-120V / 60Hz
Motor power: 850W
Your Guarantee
If this product is found to be faulty as a result of faulty materials or
workmanship within one year from date of purchase, it will be repaired free of
charge.
This guarantee is subject to the following terms:
•
•
Sunpentown must be notified of the fault.
Proof of purchase must be presented to Sunpentown’s nominated
representative.
•
•
The warranty will be void if the product if modified, misused or repaired
by an unauthorized person.
The warranty after repair will not be extended beyond the original
one-year period.
•
•
•
All replacement parts will be new or reconditioned.
Parts, which are replaced, become the property of Sunpentown.
The warranty applies for the use of the product in the USA only.
What is NOT COVERED:
•
•
Warranty does not include freight charges.
Incidental or consequential damage caused by possible defects with
this product.
•
•
•
Damage to product caused by improper power supply voltage, accident,
fire, floods or acts of nature.
Failure of product resulting from unauthorized modifications to the
product.
Improper installation or failure to perform the necessary maintenance.
This GUARANTEE is in addition to your Statutory Rights
Sunpentown Int’l Inc.
21415 Baker Parkway, City of Industry, CA 91789-5236
Tel: 909-468-5288 · Fax: 909-468-5279
|