-
-
Adds Bluetooth Music streaming to the OEM Acura/Honda radio.
USB music playback with track up, track down and folder controls from the radio panel or steering
wheel controls.
-
-
-
-
Adds 3.5mm auxiliary audio input jack.
Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
USB port on the module can also be used to charge your phone.
Magnetic phone mount included.
1. Not compatible on Acura vehicles equipped with AcuraLink.
2. Radio must have a 14-pin CD changer port.
3. Not compatible with vehicles with DVD Navigation or factory rear
view camera.
Navigations Apps
iPod, USB flash drive
and 3.5mm cable not
included.
1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 14-pin CD changer port. If there is a connector plugged into this cavity, you need to
unplug it.
3. Plug the WHITE 14-pin connector of the BTS-HN2 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-HN2
module and run towards the desired location.
5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the
BTS-HN2 module and run to the desired location.
6. You can also mount the BTS-HN2 to an accessible location such as the center console or glove
box, to use the 3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
1/2
rev.092117
|