HL‑L8260CDN / HL‑L8260CDW / HL‑L8360CDW /
HL‑L9310CDW
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
D00EPH001-00
UK
The latest manuals are available at the Brother Solutions
Quick Setup Guide
Version 0
Unpack the machine and check the components
* Already installed in the machine
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
• Interface cables are not included. If you require one, it will need to be
purchased. Use one of the following cables:
USB cable
Drum Unit*
Waste Toner Box*
Belt Unit*
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5e (or greater) twisted-pair
cable.
• The illustrations in this Quick Setup Guide show the HL-L8360CDW.
Watch our Video FAQs for
help with setting up your
Brother machine:
Inbox Toner Cartridges*
Brother Installation Disc
Product Safety Guide
AC Power Cord
(Black, Cyan, Magenta and Yellow)
Reference Guide
Quick Setup Guide
(only for certain models)
Remove the packing materials and install the drum unit and toner cartridge assembly
1
Remove the packing tape.
3
1
4
2
Load paper in the paper tray
2
Do not exceed this mark.
Adjust the paper
guides.
Connect the power cord and turn the machine on
3
4
Back
Front
Select your language (if needed)
„ For LCD models
„ For Touchscreen models
1. Press ▼ or ▲ to select [Initial Setup], and
1. On the machine’s Touchscreen, press
[Settings]> [All Settings]>
then press OK.
[Initial Setup]> [Local Language].
2. Press OK to select [Local Language].
2. Press your language.
3. Press ▼ or ▲ to select your language, and then
press OK.
3. Press
.
4. Press Cancel.
|