York Sunline Magnum Dy 036 User Manual

343615-YTG-A-0807

DESCRIPTION

YORK Sunline Magnum™ units are convertible single pack-

age air conditioners with a common cabinet and a common

roof curb for the 3, 4 and 5 ton sizes. The units were

designed for light commercial and commercial applications.

They can easily be installed on a roof curb, slab, roof jack or

frame.

TECHNICAL GUIDE

SINGLE PACKAGE GAS/ELECTRIC UNITS

AND SINGLE PACKAGE

All units include:

•

Powder Paint finish that meets ASTM-B-117 1000 hour

salt spray standards

AIR CONDITIONERS

•

Permanently lubricated motors

DY 036, 048 & 060

Bottom or side air discharge configuration capability

(field convertible)

3, 4 & 5 NOMINAL TONS

•

Manufactured under the quality standards of ISO9001

14.00 SEER

•

S implicity Control Board

Copper tube/aluminum fin coils

Easy access to all components

Rigging holes in base rails for lifting

Fork lift slots on three sides

Single point power connection

Complete factory package - tested, charged and wired

CSA agency listing on all units

WARRANTY

•

Factory Limited Parts Warranty

One-year parts warranty

A Five-year parts warranty on the compressor and

electric heat elements.

•

Ten-year parts warranty on the gas-fired heat

exchangers.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

343615-YTG-A-0807

PRODUCT NOMENCLATURE

3-5 Ton Sunline Magnum™ Model Number Nomenclature

D Y 048 N04 A 2 A AA 2 0 1 2 4 A

Product Category

Product Style

D = A/C, Single Pkg., R-22

A = Style A

Product Identifier

Y = 14.0 SEER

Configuration Options (not required for all units)

These four digits will not be assigned until a quote is requested, or an order placed.

SS Drain Pan

CPC Controller, DFS, APS

Johnson Controller, DFS, APS

Nominal Cooling Capacity

Honeywell Controller, DFS, APS

036 = 3.0 Ton

048 = 4.0 Ton

060 = 5.0 Ton

Novar Controller, DFS, APS

Simplicity IntelliComfort Controller

Simplicity IntelliComfort Controller w/ModLinc

2" Pleated filters

Heat Type and Nominal Heat Capacity

BAS Ready Economizer (2-10 V.D.C. Actuator without a Controller)

Any Combination of Additional Options that Don’t Have an Option Code Pre-assigned

C00 = Cooling Only. Suitable for Field

Installed Electric Heat

Product Generation

2 = Second Generation

Gas Heat Options

N04 = 40 MBH Output Aluminized Steel, 1 Stage (036)

N06 = 60 MBH Output Aluminized Steel, 1 Stage (048)

N08 = 80 MBH Output Aluminized Steel, 1 Stage

(036, 060)

Additional Options

Hinged Filter Door & Toolless Access Cabinet

N10 = 100 MBH Output Aluminized Steel, 1 Stage

(048, 060)

Standard Cabinet

D06 = 60 MBH Output Aluminized Steel, 2 Stage

(036, 048, 060)

AA = None

BA = Hinged Filter Door & Toolless Access Panels

BB = Phase Monitor, Hinged Filter Door & Toolless

Access Panels

BC = Coil Guard, Hinged Filter Door & Toolless

Access Panels

BD = Dirty Filter Switch, Hinged Filter Door &

Toolless Access Panels

BE = Phase Monitor & Coil Guard, Hinged Filter

Door & Toolless Access Panels

BF = Phase Monitor & Dirty Filter Switch, Hinged

Filter Door & Toolless Access Panels

BG = Coil Guard & Dirty Filter Switch, Hinged Filter

Door & Toolless Access Panels

AB = Phase Monitor

D10 = 100 MBH Output Aluminized Steel, 2 Stage

(036*, 048, 060)

AC = Coil Guard

AD = Dirty Filter Switch

S04 = 40 MBH Output Stainless Steel, 1 Stage (036)

S06 = 60 MBH Output Stainless Steel, 1 Stage (048)

S08 = 80 MBH Output Stainless Steel, 1 Stage

(036, 060)

AE = Phase Monitor & Coil Guard

AF = Phase Monitor & Dirty Filter Switch

AG = Coil Guard & Dirty Filter Switch

AH = Phase Monitor, Coil Guard & Dirty Filter Switch

AS = Bottom Drain Connection

RC = Coil Guard & American Flag

TA = Technicoat Condenser Coil

TJ = Technicoat Evaporator Coil

TS = Technicoat Evaporator and Condenser Coil

S10 = 100 MBH Output Stainless Steel, 1 Stage

(048, 060)

T06 = 60 MBH Output Stainless Steel, 2 Stage

(036, 048, 060)

T10 = 100 MBH Output Stainless Steel, 2 Stage

(036*, 048, 060)

BH = Phase Monitor, Coil Guard & Dirty Filter Switch,

Hinged Filter Door & Toolless Access Panels

Electric Heat Options

ZZ = If desired option combination is not listed above, ZZ will be assigned and configuration options will be

located in digits 15-18.

E05 = 5 KW

E07 = 7 KW

E10 = 10 KW

E15 = 15 KW

E20 = 20 KW

E30 = 30 KW

Installation Options

A = No Options Installed

B = Option 1

*(D, T)10 = 92 MBH Output on 036 Models

Airflow

C = Option 2

D = Options 1 & 2

E = Option 3

F = Option 4

A = Direct Drive

B = Direct Drive/Single Input Economizer

D = Direct Drive/Motorized Damper

G = Options 1 & 3

H = Options 1 & 4

J = Options 1, 2 & 3

K = Options 1, 2, & 4

L = Options 1,3 & 4

M = Options 1, 2, 3, & 4

N = Options 2 & 3

P = Options 2 & 4

Q = Options 2, 3, & 4

R = Options 3 & 4

S = Option 5

Voltage

1 = 208/230-1-60

2 = 208/230-3-60

4 = 460-3-60

5 = 575-3-60

T = Options 1 & 5

U = Options 1, 3, & 5

V = Options 1, 4, & 5

W = Options 1, 3, 4, & 5

X = Options 3 & 5

Y = Options 4 & 5

Z = Options 3, 4 & 5

Options

1 = Disconnect

2 = Non-Pwr'd Conv. Outlet

3 = Smoke Detector S.A.

4 = Smoke Detector R.A.

5 = Pwr'd Conv. Outlet

Unitary Products Group

343615-YTG-A-0807

gas valve, if applicable, and the temperature limit

switch on gas heat units. The unit control board will

alarm on ignition failures, compressor lockouts and

repeated limit switch trips.

FEATURES

All models are available with a wide variety of factory-

mounted options such as stainless steel heat exchangers,

electric heaters, phase monitor, convenience outlet, dirty filter

switch, disconnect switch, smoke detectors, and coil guard to

make them suitable for almost every application.

•

Nuisance Trip Protection- To prevent nuisance

trouble calls, the control board uses a “three strikes,

you’re out” philosophy. The high and low-pressure

switches and the freezestats must trip three times

within two hours before the unit control board will

lock out the compressor.

All units are self-contained and assembled on full perimeter

base rails with forklift holes on three sides and holes for over-

head rigging. Every unit is completely piped, wired, charged

and tested at the factory to simplify the field installation and to

provide years of dependable operation.

On Board Diagnostics - Each alarm will energize a

trouble light on the thermostat, if so equipped, and

flash an alarm code on the control board LED. Each

high and low-pressure switch alarm as well as each

freezestat alarm has its own flash code. The control

board saves the five most recent alarms in memory,

and these alarms can be reviewed at any time.

Alarms and programmed values are retained

through the loss of power.

All models (including those with an economizer) are suitable

for either bottom or horizontal duct connections. For bottom

duct, remove the sheet metal panels from the supply and

return air openings through the base of the unit. For horizon-

tal duct, remove the supply and return air panels on the rear

of the unit.

All models are available with these “factory mounted” outdoor

air damper options:

All units have long lasting powder paint cabinets with 1000

hour salt spray test approval under ASTM-B117 procedures.

•

Single enthalpy economizer

Motorized outdoor air damper

All models are CSA listed.

•

Warranty - All models include a one-year limited parts

warranty on the complete unit. Compressors and electric

heater elements carry a five-year warranty. Gas heat

exchangers carry a 10-year parts warranty.

Supply air blowers are equipped with a 5 speed direct drive

motor that can be adjusted to meet the exact requirements of

the job.

•

Gas Heat Operation - All single phase models with gas

heat have minimum annual fuel utilization efficiency

(AFUE) of 80%. All three phase models with gas heat

have minimum steady state efficiency of 80%. Each sec-

tion includes a durable heat exchanger with aluminized

steel or optional stainless steel tubes, a redundant gas

valve, spark ignition, power venting, an ignition module

for 100% shut-off and all of the safety controls required

to meet the latest ANSI standards.

All compressors are equipped with internal pressure relief.

Every refrigerant circuit includes a liquid line filter-drier, a high

pressure switch and a suction line with a freezestat and low

pressure/loss of charge switch to protect all system compo-

nents.

•

S implicity Controls - S implicity control boards have

standardized a number of features previously available

only as options or by utilizing additional controls.

•

Low Ambient - An integrated low-ambient control

allows all units to operate in the cooling mode down

to 0ºF outdoor ambient without additional assis-

tance. Optionally, the control board can be pro-

grammed to lockout the compressors when the

outdoor air temperature is low or when free cooling

is available.

The gas supply piping can be routed into the heating

compartment through a hole in the base pan of the unit

or through a knockout in the piping panel on the front of

the unit.

•

Electric Heat Operation - All electric heat models are

wired for a single power source and include a bank of

nickel chromium elements mounted at the discharge of

the supply air blower to provide a high velocity and uni-

form distribution of air across the heating elements.

Every element is fully protected against excessive tem-

perature by thermal limit switches.

•

Anti-Short Cycle Protection - To aid compressor

life, an anti-short cycle delay is incorporated into the

standard controls. Compressor reliability is further

ensured by programmable minimum run times. For

testing, the anti short cycle delay can be temporarily

overridden with the push of a button.

The power supply wiring can be routed into the control

box through a threaded pipe connection (field supplied)

in the base pan of the unit or through a knockout in the

wiring panel on the side of the unit.

•

Fan Delays - Fan on and fan off delays are fully pro-

grammable and are independent of one another. All

units are programmed with default values based

upon their configuration of cooling and heat.

•

BAS Controls - York’s Sunline™ series units offer factory

mounted BAS controls such as S implicity INTELLI-Com-

Safety Monitoring - The control board monitors the

fort™, Novar, Honeywell, Johnson, and CPC.

high and low-pressure switches, the freezestats, the

Unitary Products Group

343615-YTG-A-0807

FIGURE 1 - UNIT CUTAWAY

•

FILTER OPTIONS - Standard units are shipped with 1”

throw-away filters installed. 2” pleated filters are offered

as a factory installed option.

FACTORY-INSTALLED OPTIONS

•

SINGLE INPUT ELECTRONIC ENTHALPY ECONO-

MIZERS - Includes a slide-in / plug-in damper assembly

with fully modulating spring-return motor actuator capa-

ble of introducing up to 100% outdoor air with nominal

1% leakage type dampers.

CONVENIENCE OUTLET - This 110 volt outlet can be

“powered” by the unit with a stepdown transformer or the

unit may be ordered with a “non-powered” convenience

outlet that can be wired in the field.

The enthalpy system contains one sensor that monitors

the outdoor air and determines when the air is cool

enough and dry enough to provide free cooling.

•

DISCONNECT SWITCH - For gas heat units and cooling

units with electric heat, a HACR breaker sized to the unit

is provided. For cooling only units, a switch sized to the

largest electric heat available for the particular unit is

provided. Factory installed option only.

The rainhood is painted to match the basic unit and must

be field-assembled before installing.

•

MOTORIZED OUTDOOR AIR INTAKE DAMPER -

Includes a slide-in / plug-in damper assembly with a 2-posi-

tion, spring return motor actuator which opens to a pre-set

position whenever the supply air blower is operating and

will drive fully closed when the blower unit shuts down.

BAS - Building Automation System Controls

S implicity INTELLI-Comfort™ CONTROL - The York®

S implicity INTELLI-Comfort™ control is factory installed.

It includes a supply air sensor, a return air sensor, and an

outside air sensor. There are provisions for a field installed

dirty filter indicator switch, an air-proving switch, an Out-

side Air Humidity sensor, a Return Air Humidity sensor, an

Inside IAQ sensor, and an Outside Air IAQ sensor. Con-

struction mode operation, 365-day real time clock with 7

day programming plus holiday scheduling is built-in. Two

different modes of demand ventilation are achieved

through the INTELLI-Comfort™ using CO2 sensors. It

uses an inside CO2 sensor to perform Demand Ventila-

tion. It can also use an Outside CO2 sensor to perform

Differential Demand Ventilation. It uses a Patented Com-

fort Ventilation algorithm to provide comfortable ventilation

The rain hood is painted to match the basic unit and

must be field assembled before installing.

•

PHENOLIC COATED EVAPORATOR AND CON-

DENSER COILS - Special coating process that utilizes

Technicoat 10-1 processes. Coating is applied by total

immersion of the complete coil for maximum protection.

ELECTRIC HEATERS - Wired for single point power

supply. These nickel chromium heater elements are pro-

vided with limit and automatic reset capability to prevent

operation at excessive temperatures.

Unitary Products Group

343615-YTG-A-0807

air temperature. The patented economizer-loading algo-

rithm will protect the equipment when harsh operating

conditions exist. Humidity in the occupied space or return

duct can be monitored and controlled via humidity sensors

and the on-board connection for hot gas re-heat system. It

uses the INTELLI-Start™ algorithm to maximize energy

savings by recovering the building from the Unoccupied

Setpoints to the Occupied Setpoints just in time for the

•

STAINLESS STEEL HEAT EXCHANGER - For applica-

tions in corrosive environments, this option provides a

full stainless steel heat exchanger assembly.

STAINLESS STEEL DRAIN PAN - An optional rust-

proof stainless steel drain pan is available to provide

years of trouble-free operation in corrosive environ-

ments.

Occupied Time Period to begin. The S implicity INTELLI-

Comfort™ balances space temperature, ventilation air

temperature, CO2 and humidity for ultimate comfort.

•

BOTTOM DRAIN CONNECTION - An optional bottom

drain connection is available for inside the curb connec-

tions for applications in cold environments to reduce

freezing drain lines.

•

S implicity INTELLI-Comfort™ with MOD LINK CON-

TROL - The York® S implicity INTELLI-Comfort™ with

•

PHASE MONITORS - Designed to prevent unit damage.

The phase monitor will shut the unit down in an out-of-

phase condition.

Mod Link control is factory installed. It includes all the

features of the INTELLI-Comfort™ control with an addi-

tional control to translate communications from MOD-

BUS to the BACnet MSTP protocol.

DIRTY FILTER SWITCH - This kit includes a differential

pressure switch that energizes the fault light on the unit

thermostat, indicating that there is an abnormally high

pressure drop across the filters. Factory installed option

or field installed accessory.

•

Novar® BAS CONTROL - The Novar® ETC-3 building

automation system controller is factory installed.

Includes supply air sensor, return air sensor, dirty filter

indicator switch, and air proving switch.

•

HINGED FILTER DOOR/“TOOLLESS” BLOWER AND

ACCESS PANELS (not hinged) - This option allows for

easy access and maintenance.

JOHNSON CONTROLS BAS CONTROL - The Johnson

Control YK-UNT-1126 building automation system con-

troller is factory installed. Includes supply air sensor,

return air sensor, dirty filter indicator switch, and air prov-

ing switch.

NOTE:Knobs are shipped inside the unit to prevent ship-

ping damage. These must be field installed for

tool-less operation.

•

CPC BAS CONTROL - The Computer Process Controls

Model 810-3060 ARTC Advanced Rooftop building auto-

mation system controller is factory installed. Includes

supply air sensor, return air sensor, dirty filter indicator

switch and air proving switch.

FIELD-INSTALLED ACCESSORIES

•

SINGLE INPUT ELECTRONIC ENTHALPY ECONO-

MIZERS - Includes a slide-in / plug-in damper assembly

with fully modulating spring-return motor actuator capa-

ble of introducing up to 100% outdoor air with nominal

1% leakage type dampers.

•

HONEYWELL BAS CONTROL - The Honeywell

W7750C building automation system controller is factory

installed. Includes air supply sensor, return air sensor,

dirty filter indicator switch, and air proving switch.

The enthalpy system contains one sensor that monitors

the outdoor air and determines when the air is cool

enough and dry enough to provide free cooling.

SMOKE DETECTORS - (supply air & return air) The

smoke detectors stop operation of the unit by interrupting

power to the control board if smoke is detected within the

air compartment.

The rainhood is painted to match the basic unit and must

be field-assembled before installing.

COIL GUARD - Customers can purchase a coil guard kit

to protect the condenser coil from damage. This is not a

hail guard kit.

•

MOTORIZED OUTDOOR AIR INTAKE DAMPER -

Includes a slide-in / plug-in damper assembly with a 2-

position, spring return motor actuator which opens to

some pre-set position whenever the supply air blower is

operating and will drive fully closed when the blower unit

shuts down.

Factory installed Smoke Detectors in the Return

Air, may be subjected to freezing temperatures

during "off" times due to Out Side Air infiltration.

These Smoke Detectors have an operational limit

of 32°F to 131°F. Smoke Detectors installed in

areas that could be out side those limitations will

have to be moved to prevent having false alarms.

The rain hood is painted to match the basic unit and

must be field assembled before installing.

•

ELECTRIC HEATERS wired for single point power sup-

ply. These nickel chromium heater elements are pro-

vided with limit and automatic reset capability to prevent

operation at excessive temperatures.

Unitary Products Group

343615-YTG-A-0807

•

ROOF CURBS - Eight and fourteen-inch high roof curbs

provide a water-tight seal between the unit and the finished

roof. These full perimeter curbs meet the requirements of

the National Roofing Contractors Association (NRCA) and

are shipped knocked-down for field assembly.

•

BAROMETRIC RELIEF DAMPER - This damper acces-

sory can be used to relieve internal building air pressure

on units with an economizer without power exhaust. This

accessory includes a rain hood, a bird screen and a fully

assembled damper. With bottom duct connections, the

damper should be mounted over the opening in the

return air panel. With horizontal ductwork, the accessory

should be mounted on the return air duct.

Roof curbs are designed to fit inside the base rails of the

unit and include both a wood nailing strip and duct

hanger supports.

•

ENTHALPY ACCESSORY CONTROL KIT - This kit

contains the required components to convert a single

enthalpy economizer to dual enthalpy.

•

HIGH ALTITUDE NATURAL GAS - Burner orifices and

pilot orifices are provided for proper furnace operation at

altitudes up to 6,000 feet.

•

BURGLAR BARS - Mount in the supply and return

openings to prevent entry into the duct work.

PROPANE - Burner orifices, pilot orifices and gas valve

parts are provided to convert a natural gas furnace to

propane.

FLUE EXHAUST EXTENSION KIT - In locations with

wind or weather conditions which may interfere with

proper exhausting of furnace combustion products, this

kit can be installed to prevent the flue exhaust from

entering nearby fresh air intakes.

HIGH ALTITUDE PROPANE - Burner orifices and pilot

orifices are provided for proper furnace operation at alti-

tudes up to 6,000 feet. This accessory supplements the

basic propane conversion kit.

•

CO SENSOR - Senses CO levels and automatically

overrides the economizer when levels rise above the

present limits.

•

LOW NOX KIT - Required to reduce the emission of

nitrogen oxides below 40 nano grams per joule.

POWER EXHAUST - Our single input economizer

options are available with power exhaust. Whenever the

outdoor air intake dampers are opened for free cooling,

the exhaust fan will be energized to prevent the condi-

tioned space from being over-pressurized during econo-

mizer operation.

COIL GUARD - Customers can purchase a coil guard kit

to protect the condenser coil from damage. This is not a

hail guard kit.

HAIL GUARD - Hail Guard kit is available to prevent unit

from hail damage. This is a sloped hood that fits above

the coil.

The power exhaust option can only be used on bot-

tom duct configurations.

GAS PIPING KIT - This kit supplies all necessary fittings

and shut off valve.

TABLE 1: CAPACITY RATINGS - (ARI 210/240)

TABLE 2: GAS HEAT RATINGS

SOUND

RATING

(Db)⁴

MBH

INPUT

MBH

OUTPUT

AFUE

(%)

TEMP

RISE ºF

MODEL

EER²

SEER³

MODEL

MBH

CFM

DY036N04

DY036N08

DY048N06

DY048N10

DY060N08

DY060N10

100

80.9

80.5

15 - 45

40 - 70

DY036

DY048

DY060

35.6

46.0

59.0

1200

1600

1750

125

100

80.9

80.3

25 - 55

45 - 75

11.6

100

125

100

80.5

80.3

25 - 55

35 - 65

1. 80/67°F Indoor and 95°F outdoor.

2. EER = Energy Efficiency Ratio at full load - the cooling

capacity in Btu’s per hour (Btuh) divided by the power

input in watts, expressed in Btuh per watt (Btuh/watt).

3. SEER = Seasonal Energy Efficiency Ratio.

1. All units are single-stage heating.

4. Rated in accordance with ARI 270 Standard.

TABLE 3: 2 STAGE GAS HEAT RATINGS

MBH INPUT

MBH OUTPUT

STEADY STATE EFFICIENCY

RISE

MINIMUM HEATING

AIRFLOW (CFM)

MODEL¹

^STSTAGE 2^NDSTAGE 1^STSTAGE 2^NDSTAGE 1^STSTAGE

2^NDSTAGE

MIN. MAX.

115

35.8

55.2

35.7

60.4

35.8

60.4

60.8

79.4

80.0

79.4

80.5

79.4

80.5

81.1

790

950

DY036D06

DY036D10

DY048D06

DY048D10

DY060D06

DY060D10

80.2

60.8

100.6

60.8

100.6

81.1

790

125

80.5

1230

1010

1230

81.1

125

80.5

1. Models are 3Ø only.

Unitary Products Group

343615-YTG-A-0807

TABLE 4: DY036 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY036 / 3 Ton

Horizontal Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

630

0.2

1116

0.41

631

879

0.2

885

0.7

1020

0.53

0.3

928

0.37

1979

0.76

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

Octave Center Freq.

(dB)

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 5: DY036 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY036 / 3 Ton

Horizontal Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

630

0.2

1116

0.41

631

0.3

879

0.2

885

0.7

1020

0.53

928

0.37

1979

0.76

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 6: DY036 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY036 / 3 Ton

Vertical Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

632

0.2

1069

0.36

632

881

0.2

883

0.7

917

0.49

0.3

870

0.33

1903

0.71

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 7: DY036 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY036 / 3 Ton

Vertical Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

632

0.2

1069

0.36

632

0.3

881

0.2

883

0.7

917

0.49

870

0.33

1903

0.71

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 8: DY048 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY048 / 4 Ton

Horizontal Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

766

0.2

1484

0.67

769

1077

0.4

1087

1.0

1406

0.90

0.5

993

0.54

2270

1.24

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

Octave Center Freq.

(dB)

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 9: DY048 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY048 / 4 Ton

Horizontal Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

766

0.2

1484

0.67

769

0.5

1077

0.4

1087

1.0

1406

0.90

993

0.54

2270

1.24

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 10: DY048 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY048 / 4 Ton

Vertical Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

791

0.2

1408

0.54

794

1084

0.2

1095

1.0

1275

0.73

0.5

1000

0.42

2336

1.12

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 11: DY048 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY048 / 4 Ton

Vertical Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

791

0.2

1408

0.54

794

0.5

1084

0.2

1095

1.0

1275

0.73

1000

0.42

2336

1.12

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 12: DY060 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY060 / 5 Ton

Horizontal Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

840

0.2

1695

0.67

845

1166

0.3

1188

1.3

1323

0.80

0.6

1100

0.50

2618

1.51

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

Octave Center Freq.

(dB)

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 13: DY060 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY060 / 5 Ton

Horizontal Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

840

0.2

1695

0.67

845

0.6

1166

0.3

1188

1.3

1323

0.80

1100

0.50

2618

1.51

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 14: DY060 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED INLET)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY060 / 5 Ton

Vertical Ducted Inlet

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

834

0.2

1525

0.61

840

1171

0.2

1194

1.3

1256

0.83

0.6

1019

0.44

2624

1.43

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

TABLE 15: DY060 INDOOR SOUND POWER LEVELS (VERTICAL DUCTED DISCHARGE)

UNIT DESCRIPTION / MODEL

CONFIGURATION

DY060 / 5 Ton

Vertical Ducted Discharge

Indoor Blower Speed (RPM)

Blower Static Pressure (IWG)

Airflow (CFM)

834

0.2

1525

0.61

840

0.6

1171

0.2

1194

1.3

1019

0.44

2624

1.43

1256

0.83

Blower Motor BHP

Cooling

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

ID Blower

Only (dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Operation²

(dB)

Octave Center Freq.

125

250

500

1000

2000

4000

8000

1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

2. Cooling Operation – ID blower, compressor and outdoor fan operating.

3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).

4. Test duct termination is flush with reverberation room wall.

5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.

Unitary Products Group

343615-YTG-A-0807

TABLE 16: DY036 COOLING CAPACITIES (3 TON)

Temperature of Air on Condenser Coil

Air on Evap-

orator Coil

75°F

85°F

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Total Total

Cap.

Total Total

Cap.

CFM

Input

(°F)

(MBH) (kW)

2.3

2.2

2.3

2.2

2.3

2.2

2.3

95°F

115°F

2.5

105°F

125°F

900

1050

1200

1350

1500

2.7

3.0

2.9

3.0

2.9

2.8

2.9

3.0

2.9

3.1

2.9

3.0

900

1050

1200

1350

1500

3.3

3.1

3.2

3.3

3.0

3.1

3.2

3.0

3.1

3.3

3.1

3.2

3.4

3.2

3.3

3.7

3.3

3.5

3.2

3.4

3.1

3.3

3.6

3.2

3.4

3.8

3.4

3.6

900

1050

1200

1350

1500

1. The capacities are gross ratings. For net capacity, deduct indoor blower motor, MBH=3.415 x kW. Refer to the appropriate Blower Perfor-

mance table for the kW of the supply air blower motor.

2. These ratings include the condenser fan motors (total 1 kW) and the compressor motors but not the supply air blower motor.

Unitary Products Group

343615-YTG-A-0807

TABLE 17: DY048 COOLING CAPACITIES (4 TON)

Temperature of Air on Condenser Coil

Air on Evap-

orator Coil

75°F

85°F

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Total Total

Cap.

Total Total

Cap.

CFM

Input

(°F)

(MBH) (kW)

2.8

95°F

115°F

3.1

3.0

3.1

3.0

3.1

3.0

3.1

105°F

125°F

1200

1400

1600

1800

2000

3.3

3.4

3.3

3.4

3.3

3.4

3.3

3.4

3.3

3.4

3.3

3.7

3.6

3.7

3.6

3.7

3.6

3.7

3.6

3.7

1200

1400

1600

1800

2000

4.0

3.9

4.0

3.9

4.0

3.9

4.0

4.1

4.0

4.3

4.2

4.3

4.2

4.3

4.2

4.3

4.4

4.3

4.4

4.3

1200

1400

1600

1800

2000

1. The capacities are gross ratings. For net capacity, deduct indoor blower motor, MBH=3.415 x kW. Refer to the appropriate Blower

Performance table for the kW of the supply air blower motor.

2. These ratings include the condenser fan motors (total 1 kW) and the compressor motors but not the supply air blower motor.

Unitary Products Group

343615-YTG-A-0807

TABLE 18: DY060 COOLING CAPACITIES (5 TON)

Temperature of Air on Condenser Coil

Air on Evap-

orator Coil

75°F

85°F

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Sensible Capacity (MBH)

Return Dry Bulb (°F)

Total Total

Cap.

Total Total

Cap.

CFM

Input

(°F)

(MBH) (kW)

73.9

67.1

60.7

57.7

76.2

69.2

62.7

59.6

78.6

71.4

64.6

61.4

79.1

71.9

65.0

61.8

79.6

72.3

65.5

62.2

3.7

3.6

3.7

3.8

3.7

39.9 35.6 31.3 27.0 22.8

69.2

4.3

4.2

4.1

4.2

4.3

4.2

4.1

4.2

4.3

4.2

4.3

4.2

4.3

4.2

38.6 34.3 30.1 25.8 21.5

50.5 46.3 42.0 37.7 33.4 29.2 24.9 63.1

60.7 55.2 50.9 46.7 42.4 38.1 33.8 57.6

57.7 57.7 54.1 49.8 45.5 41.3 37.0 55.4

48.9 44.6 40.4 36.1 31.8 27.5 23.2

57.6 53.6 49.4 45.1 40.8 36.5 32.3

55.4 55.4 51.6 47.4 43.1 38.8 34.5

1500

44.3 39.2 34.1 29.1 24.0

71.3

42.9 37.8 32.7 27.7 22.6

55.9 50.9 45.8 40.8 35.7 30.6 25.6 65.0

62.7 59.9 55.6 50.5 45.4 40.4 35.3 59.4

59.6 59.6 59.0 53.9 48.9 43.8 38.8 57.0

54.1 49.0 44.0 38.9 33.9 28.8 23.8

59.4 57.4 53.8 48.7 43.7 38.6 33.6

57.0 57.0 56.3 51.2 46.2 41.1 36.1

1750

48.7 42.8 37.0 31.2 25.3

73.4

47.1 41.3 35.4 29.6 23.8

61.3 55.5 49.6 43.8 38.0 32.1 26.3 66.9

64.6 64.6 60.2 54.3 48.5 42.7 36.9 61.1

61.4 61.4 63.9 58.1 52.2 46.4 40.6 58.7

59.2 53.4 47.6 41.8 35.9 30.1 24.3

61.1 61.1 58.2 52.4 46.6 40.7 34.9

58.7 58.7 60.9 55.1 49.2 43.4 37.6

2000

52.5 45.8 39.2 32.5 25.9

73.8

50.9 44.2 37.6 30.9 24.3

66.8 59.2 52.6 45.9 39.3 32.6 26.0 67.3

65.0 65.0 62.8 56.2 49.5 42.9 36.3 61.4

61.8 61.8 63.1 56.4 49.8 43.1 36.5 59.0

63.5 57.1 50.5 43.8 37.2 30.5 23.9

61.4 61.4 60.0 53.4 46.7 40.1 33.4

59.0 59.0 60.1 53.5 46.8 40.2 33.6

2250

56.3 48.8 41.4 33.9 26.5

74.2

54.6 47.2 39.7 32.3 24.8

72.3 62.9 55.5 48.0 40.6 33.1 25.7 67.7

65.5 65.5 65.5 58.0 50.6 43.1 35.7 61.8

62.2 62.2 62.2 54.8 47.3 39.9 32.4 59.3

95°F

67.7 60.8 53.3 45.9 38.4 31.0 23.5

61.8 61.8 61.8 54.3 46.9 39.4 32.0

59.3 59.3 59.3 51.9 44.4 37.0 29.5

105°F

2500

64.6

59.2

54.6

53.0

66.4

60.8

56.1

54.5

68.2

62.5

57.6

55.9

68.5

62.8

57.8

56.2

68.8

63.0

58.1

56.4

4.8

4.7

4.6

4.7

4.8

4.7

4.6

4.7

4.8

4.7

4.8

4.7

4.9

4.8

4.7

4.8

37.4 33.1 28.8 24.5 20.2

61.3

5.4

5.3

5.4

5.3

5.4

5.3

5.4

5.3

5.5

5.4

5.3

5.4

35.6 31.3 27.0 22.8 18.5

47.3 43.0 38.7 34.4 30.2 25.9 21.6 55.7

54.6 52.1 47.8 43.5 39.3 35.0 30.7 51.5

53.0 53.0 49.2 44.9 40.7 36.4 32.1 50.4

45.6 41.3 37.0 32.7 28.4 24.2 19.9

51.5 50.0 45.8 41.5 37.2 32.9 28.6

50.4 50.4 46.5 42.2 38.0 33.7 29.4

1500

41.5 36.4 31.3 26.3 21.2

62.7

39.5 34.4 29.4 24.3 19.3

52.2 47.2 42.1 37.1 32.0 27.0 21.9 57.0

56.1 54.8 52.0 47.0 41.9 36.9 31.8 52.7

54.5 54.5 53.6 48.5 43.4 38.4 33.3 51.6

50.3 45.3 40.2 35.2 30.1 25.1 20.0

52.7 52.0 49.7 44.7 39.6 34.6 29.5

51.6 51.6 50.6 45.5 40.5 35.4 30.4

1750

45.6 39.7 33.9 28.1 22.2

64.1

43.4 37.6 31.7 25.9 20.1

57.2 51.4 45.5 39.7 33.9 28.1 22.2 58.3

57.6 57.6 56.3 50.4 44.6 38.8 32.9 53.9

55.9 55.9 57.9 52.1 46.2 40.4 34.6 52.8

55.1 49.3 43.4 37.6 31.8 25.9 20.1

53.9 53.9 53.7 47.9 42.1 36.2 30.4

52.8 52.8 54.6 48.8 43.0 37.1 31.3

2000

49.3 42.6 36.0 29.3 22.7

64.2

47.1 40.5 33.9 27.2 20.6

60.1 55.0 48.4 41.7 35.1 28.4 21.8 58.4

57.8 57.8 57.2 50.5 43.9 37.2 30.6 54.0

56.2 56.2 57.2 50.5 43.9 37.2 30.6 52.8

56.8 52.8 46.3 39.7 33.1 26.4 19.8

54.0 54.0 53.9 47.3 40.6 34.0 27.3

52.8 52.8 53.8 47.1 40.5 33.9 27.2

2250

53.0 45.5 38.1 30.6 23.2

64.3

50.9 43.4 36.0 28.5 21.1

63.0 58.6 51.2 43.7 36.3 28.8 21.4 58.5

58.1 58.1 58.1 50.6 43.2 35.7 28.3 54.1

56.4 56.4 56.4 49.0 41.5 34.1 26.6 52.9

115°F

58.5 56.3 49.2 41.8 34.3 26.9 19.4

54.1 54.1 54.1 46.6 39.2 31.7 24.3

52.9 52.9 52.9 45.5 38.0 30.6 23.1

125°F

2500

57.9

52.2

48.5

47.8

59.0

53.1

49.3

48.7

60.0

54.1

50.2

49.6

59.9

54.0

50.2

49.5

59.9

53.9

50.1

49.4

6.0

5.9

6.0

5.9

6.0

5.9

6.1

6.0

5.9

6.0

6.1

6.0

33.8 29.5 25.3 21.0 16.7

54.6

6.7

6.6

6.7

6.6

6.5

6.6

6.5

6.7

6.6

6.7

6.6

32.0 27.8 23.5 19.2 14.9

43.8 39.6 35.3 31.0 26.7 22.5 18.2 48.7

48.5 48.0 43.7 39.4 35.1 30.9 26.6 45.4

47.8 47.8 43.8 39.6 35.3 31.0 26.7 45.2

42.1 37.8 33.6 29.3 25.0 20.7 16.5

45.4 45.4 41.6 37.3 33.1 28.8 24.5

45.2 45.2 41.1 36.9 32.6 28.3 24.0

1500

37.5 32.5 27.4 22.4 17.3

55.3

35.6 30.5 25.5 20.4 15.4

48.4 43.4 38.3 33.3 28.2 23.1 18.1 49.3

49.3 49.1 47.4 42.4 37.3 32.3 27.2 46.0

48.7 48.7 47.6 42.5 37.5 32.4 27.4 45.8

46.5 41.5 36.4 31.3 26.3 21.2 16.2

46.0 46.0 45.1 40.1 35.0 30.0 24.9

45.8 45.8 44.6 39.6 34.5 29.4 24.4

1750

41.3 35.4 29.6 23.8 17.9

55.9

39.1 33.3 27.4 21.6 15.8

53.0 47.2 41.3 35.5 29.7 23.8 18.0 49.9

50.2 50.2 51.2 45.3 39.5 33.7 27.9 46.5

49.6 49.6 51.4 45.5 39.7 33.9 28.0 46.4

49.9 45.1 39.2 33.4 27.6 21.7 15.9

46.5 46.5 46.5 42.8 37.0 31.1 25.3

46.4 46.4 46.4 42.2 36.4 30.6 24.7

2000

45.0 38.4 31.7 25.1 18.5

55.7

42.9 36.3 29.6 23.0 16.3

53.5 50.6 44.3 37.7 31.0 24.4 17.8 49.7

50.2 50.2 50.6 44.0 37.3 30.7 24.1 46.3

49.5 49.5 50.4 43.7 37.1 30.5 23.8 46.1

49.7 48.3 42.3 35.7 29.0 22.4 15.7

46.3 46.3 46.3 40.7 34.1 27.4 20.8

46.1 46.1 46.1 40.4 33.7 27.1 20.4

2250

48.8 41.3 33.9 26.4 19.0

55.4

46.7 39.2 31.8 24.3 16.9

53.9 53.9 47.3 39.9 32.4 25.0 17.5 49.4

50.1 50.1 50.1 42.6 35.2 27.7 20.3 46.1

49.4 49.4 49.4 42.0 34.5 27.1 19.6 45.9

49.4 49.4 45.4 37.9 30.5 23.0 15.6

46.1 46.1 46.1 38.6 31.2 23.7 16.3

45.9 45.9 45.9 38.5 31.0 23.6 16.1

2500

1. The capacities are gross ratings. For net capacity, deduct indoor blower motor, MBH=3.415 x kW. Refer to the appropriate Blower Perfor-

mance table for the kW of the supply air blower motor.

2. These ratings include the condenser fan motors (total 1 kW) and the compressor motors but not the supply air blower motor.

Unitary Products Group

343615-YTG-A-0807

TABLE 19: SUPPLY AIR BLOWER PERFORMANCE (DY036, 048, & 060 DIRECT DRIVE) SIDE DUCT APPLICATION

AVAILABLE EXTERNAL STATIC PRESSURE - IWG

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

UNIT

MOTOR

TONNAGE SPEED

1582 320 1538 335 1496 349 1458 363 1418 376 1381 390 1338 403 1298 417 1255 430

MED/HI 1488 263 1440 276 1396 290 1354 303 1309 316 1263 329 1214 343

1158

358 1085 374

MED

1339 208 1292 221 1247 234 1201 246

1152

195 1082 207 1026 220

145 863 158

258

1102

957

272 1036 288

967

303

924

313

MED/LOW 1233 171

1184

997

183

134

1135

935

235

895

248

LOW

1081 130

2056 636 2017 696 1978 714 1942 734 1906 749 1864 764 1815 769 1728 743 1582 685

MED/HI 1866 539 1832 557 1795 571 1754 585 1722 602 1679 619 1636 638 1582 653 1508 639

MED 1680 408 1641 426 1594 438 1558 455 1517 472 1469 490 1415 505 1370 521 1337 536

MED/LOW 1582 362 1541 380 1495 391 1465 406 1426 423 1377 440 1326 455 1292 469 1247 485

LOW

1300 223 1258 237 1202 247

2256 883 2258 931 2247 950 2223 964 2182 979 2125 971 2044 940 1958 898 1864 854

2119 808 2089 826 2051 844 2014 859 1965 861 1896 843 1801 806

2020 637 1999 656 1985 675 1947 696 1910 715 1876 730 1832 740 1793 756 1725 748

MED/HI 2145 771 2127 784

MED

MED/LOW 1757 413 1713 432 1677 451 1639 468 1597 479 1559 497 1521 513 1472 523

LOW 1570 327 1536 339 1499 356

1. Includes allowances for a wet evaporator coil, 1” filters, and the heat exchangers. Refer to STATIC RESISTANCES Table for resistance values.

2. Side Duct application (230 Volts)

TABLE 20: SUPPLY AIR BLOWER PERFORMANCE (DY036, 048, & 060 DIRECT DRIVE) BOTTOM DUCT APPLICATION

AVAILABLE EXTERNAL STATIC PRESSURE - IWG

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

UNIT

MOTOR

TONNAGE SPEED

1527 320 1485 335 1445 349 1408 363 1370 376 1334 390 1292 403 1254 417 1213 430

MED/HI 1437 263 1391 276 1349 290 1308 303 1265 316 1221 329

1174

343

1120

358 1049 374

MED

1293 208 1248 221 1205 234

1161

183 1097 195 1046 207

134 904 145

246

1114

992

258 1065 272 1002 288

935

303

894

313

MED/LOW 1191

171

1045 130

1144

964

220

926

235

866

248

LOW

1985 636 1947 696 1909 714 1875 734 1840 749 1800 764 1752 769 1668 743 1528 685

MED/HI 1802 539 1768 557 1733 571 1694 585 1662 602 1621 619 1580 638 1528 653 1456 639

MED 1622 408 1585 426 1539 438 1505 455 1465 472 1419 490 1367 505 1324 521 1291 536

MED/LOW 1528 362 1489 380 1444 391 1415 406 1377 423 1330 440 1281 455 1248 469 1205 485

LOW

1256 223 1216 237

1161

247

2177 883 2179 931 2169 950 2145 964 2106 979 2051 971 1973 940 1890 898 1800 854

MED/HI 2071 771 2053 784 2045 808 2016 826 1980 844 1944 859 1897 861 1830 843 1739 806

MED 1950 637 1929 656 1916 675 1880 696 1844 715 1811 730 1768 740 1731 756 1665 748

MED/LOW 1697 413 1654 432 1619 451 1583 468 1542 479 1506 497 1469 513

LOW 1516 327 1484 339 1448 356

1. Includes allowances for a wet evaporator coil, 1” filters, and the heat exchangers. Refer to STATIC RESISTANCES Table for resistance values.

2. Bottom Duct application (230 Volts)

Unitary Products Group

343615-YTG-A-0807

TABLE 21: STATIC RESISTANCES

RESISTANCE, IWG

CFM

DESCRIPTION

1000

1200

0.08

0.05

0.07

0.10

1400

0.09

0.06

0.08

0.12

1600

0.11

0.07

0.09

0.14

1800

2000

0.15

0.10

0.13

0.18

2200

2400

0.20

0.14

0.17

0.23

2600

0.23

0.16

0.20

0.26

2800

0.26

0.19

0.23

0.29

3000

0.30

0.22

0.26

0.32

1,3

ECONOMIZER

ELECTRIC

0.07

0.04

0.06

0.08

0.13

0.08

0.11

0.16

0.17

0.12

0.15

0.20

7-15KW

HEATERS

20-30KW

COOLING ONLY

1. Deduct these resistance values from the available external static pressure shown in SUPPLY AIR BLOWER PERFORMANCE Tables.

2. Add these resistance values to the available static resistance values on SUPPLY AIR BLOWER PERFORMANCE Tables.

3. The pressure through the economizer is greater for 100% outdoor air than for 100% return air. If the resistance of the return air duct system is less than

0.25 IWG, the unit will deliver less CFM during full economizer operation.

TABLE 22: ELECTRIC HEATER CFM LIMITATIONS

MINIMUM SUPPLY AIR CFM

HEATER SIZE NOMINAL KW

UNIT MODEL SIZE

NOMINAL TONS

VOLTAGE

1100

208/230-1-60

208/230-3-60

460-3-60

1100

1200

1300

1600

1200

1300

1600

1300

1400

1600

575-3-60

208/230-1-60

208/230-3-60

460-3-60

1300

575-3-60

208/230-1-60

208/230-3-60

460-3-60

1600

1800

575-3-60

Unitary Products Group

343615-YTG-A-0807

TABLE 23: ELECTRICAL DATA - DY036, 048 & 060 DIRECT DRIVE W/O POWERED CONVENIENCE OUTLET

COMPRESSORS

MIN.

MAX. FUSE/

BRKR

OD FAN

MOTOR

FLA

CONV

OUTLET

FLA

MODEL

TONNAGE

BLOWER

MOTOR

FLA

ELECTRIC HEATER HEATER HEATER CIRCUIT

VOLTAGE

RLA

LRA

MODEL NO.

AMPS

AMPACITY

(AMPS)

24.4

34.0

43.7

58.1

81.5

105.6

24.4

37.6

49.1

65.2

92.8

120.4

20.7

23.9

29.4

37.8

51.3

65.2

20.7

25.9

32.6

41.9

57.8

73.7

11.7

15.2

20.2

25.4

34.3

8.2

16.7

23.1

29.5

32.2

37.3

46.9

61.3

84.8

108.8

32.2

40.9

52.3

68.5

96.1

123.7

27.3

32.7

41.0

54.5

68.4

27.3

29.2

35.8

45.1

61.1

77.0

13.9

16.8

21.8

27.1

35.9

11.7

18.0

24.4

30.8

SIZE

(AMPS)

110

100

125

110

100

125

EACH

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

2CE04510746

2CE04511046

2CE04511546

2CE04512046

None

2CE04511058

2CE04511558

2CE04512058

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

6.8

10.1

13.6

19.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

6.8

10.1

13.6

19.5

10.6

15.9

21.2

19.2

26.9

38.5

57.2

76.4

22.1

31.3

44.2

66.3

88.3

11.1

15.5

22.2

33.0

44.1

12.7

18.0

25.5

38.2

51.0

208-1-60

11.3

8.3

68.0

2.3

8.0

0.0

230-1-60

208-3-60

230-3-60

DY036

8.3

8.2

460-3-60

575-3-60

5.1

3.2

34.0

26.0

1.3

8.0

0.0

12.1

16.4

23.5

10.2

15.3

20.4

19.2

26.9

38.5

57.2

76.4

22.1

31.3

44.2

66.3

88.3

11.1

15.5

22.2

33.0

44.1

12.7

18.0

25.5

38.2

51.0

208-1-60

230-1-60

208-3-60

230-3-60

15.4

11.5

86.0

84.0

2.3

10.6

0.0

DY048

2CE04510746

2CE04511046

2CE04511546

2CE04512046

None

2CE04511058

2CE04511558

2CE04512058

8.2

460-3-60

575-3-60

5.8

5.1

42.0

34.0

1.3

10.6

0.0

12.1

16.4

23.5

10.2

15.3

20.4

Unitary Products Group

343615-YTG-A-0807

TABLE 23: ELECTRICAL DATA - DY036, 048 & 060 DIRECT DRIVE W/O POWERED CONVENIENCE OUTLET (CONT)

COMPRESSORS

MIN.

MAX. FUSE/

BRKR

SIZE

(AMPS)

OD FAN

MOTOR

FLA

CONV

OUTLET

FLA

MODEL

TONNAGE

BLOWER

MOTOR

FLA

ELECTRIC HEATER HEATER HEATER CIRCUIT

VOLTAGE

RLA

LRA

MODEL NO.

AMPS

AMPACITY

(AMPS)

48.9

61.3

84.8

108.8

146.7

48.9

52.3

68.5

96.1

123.7

167.4

34.5

41.0

54.5

68.4

90.3

34.5

35.8

45.1

61.1

77.0

102.3

18.6

21.8

27.1

35.9

49.9

14.5

18.0

24.4

30.8

41.9

EACH

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

2CE04513006

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

2CE04513006

None

4.0

5.6

8.0

11.9

15.9

22.2

5.3

7.5

10.6

15.9

21.2

29.6

4.0

5.6

8.0

11.9

15.9

22.2

5.3

7.5

10.6

15.9

21.2

29.6

19.2

26.9

38.5

57.2

76.4

106.7

22.1

31.3

44.2

66.3

88.3

123.3

11.1

15.5

22.2

33.0

44.1

61.6

12.7

18.0

25.5

38.2

51.0

71.2

110

150

208-1-60

28.8

17.3

145.0

123.0

2.3

10.6

0.0

230-1-60

208-3-60

230-3-60

100

125

175

100

110

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

2CE04513025

None

DY060

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

2CE04513025

None

2CE04510746

2CE04511046

2CE04511546

2CE04512046

2CE04513046

None

2CE04511058

2CE04511558

2CE04512058

2CE04513058

6.8

8.2

10.1

13.6

19.5

28.8

10.6

15.9

21.2

30.4

12.1

16.4

23.5

34.6

10.2

15.3

20.4

29.3

460-3-60

575-3-60

9.6

7.4

70.0

53.0

1.3

10.6

0.0

1. HACR Type per NEC.

2. These electric heaters do not include a fuse box. If a fuse box is required to meet a local code (i.e. Chicago), the fuse block

accessories 2FB04700825 and 2FB04700846 are available for field installation.

Unitary Products Group

343615-YTG-A-0807

TABLE 24: ELECTRICAL DATA - DY036, 048 & 060 DIRECT DRIVE W/ POWERED CONVENIENCE OUTLET

COMPRESSORS

MIN.

MAX. FUSE/

BRKR

SIZE

(AMPS)

OD FAN

MOTOR

FLA

CONV

OUTLET

FLA

MODEL

TONNAGE

BLOWER

MOTOR

FLA

ELECTRIC HEATER HEATER HEATER CIRCUIT

VOLTAGE

RLA

LRA

MODEL NO.

AMPS

AMPACITY

(AMPS)

34.4

46.5

56.2

70.6

94.0

118.1

34.4

50.1

61.6

77.7

105.3

132.9

31.1

36.4

41.9

50.3

63.8

77.7

31.1

38.4

45.1

54.4

70.3

86.2

16.7

21.5

26.4

31.7

40.6

12.4

21.7

28.1

34.5

42.2

49.8

59.4

73.8

97.3

121.3

42.2

53.4

64.8

81.0

108.6

136.2

37.3

39.6

45.2

53.5

67.0

80.9

37.3

41.7

48.3

57.6

73.6

89.5

18.9

23.1

28.1

33.3

42.2

15.7

23.0

29.4

35.8

EACH

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

6.8

10.1

13.6

19.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

4.0

5.6

8.0

11.9

15.9

5.3

7.5

10.6

15.9

21.2

6.8

10.1

13.6

19.5

10.6

15.9

21.2

19.2

26.9

38.5

57.2

76.4

22.1

31.3

44.2

66.3

88.3

11.1

15.5

22.2

33.0

44.1

12.7

18.0

25.5

38.2

51.0

100

125

208-1-60

11.3

8.3

68.0

2.3

8.0

10.0

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

230-1-60

208-3-60

230-3-60

110

150

100

125

110

150

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

DY036

2CE04510525

2CE04510725

8.3

2CE04511025

2CE04511525

2CE04512025

None

2CE04510746

2CE04511046

2CE04511546

8.2

460-3-60

575-3-60

5.1

3.2

34.0

26.0

1.3

8.0

5.0

4.0

12.1

16.4

23.5

10.2

15.3

20.4

19.2

26.9

38.5

57.2

76.4

22.1

31.3

44.2

66.3

88.3

11.1

15.5

22.2

33.0

44.1

12.7

18.0

25.5

38.2

51.0

2CE04512046

None

2CE04511058

2CE04511558

2CE04512058

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

208-1-60

230-1-60

208-3-60

230-3-60

15.4

11.5

86.0

84.0

2.3

10.6

10.0

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

None

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

DY048

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

None

2CE04510746

2CE04511046

2CE04511546

8.2

460-3-60

575-3-60

5.8

5.1

42.0

34.0

1.3

10.6

5.0

4.0

12.1

16.4

23.5

10.2

15.3

20.4

2CE04512046

None

2CE04511058

2CE04511558

2CE04512058

Unitary Products Group

343615-YTG-A-0807

TABLE 24: ELECTRICAL DATA - DY036, 048 & 060 DIRECT DRIVE W/ POWERED CONVENIENCE OUTLET (CONT)

COMPRESSORS

MIN.

MAX. FUSE/

BRKR

SIZE

(AMPS)

OD FAN

MOTOR

FLA

CONV

OUTLET

FLA

MODEL

TONNAGE

BLOWER

MOTOR

FLA

ELECTRIC HEATER HEATER HEATER CIRCUIT

VOLTAGE

RLA

LRA

MODEL NO.

AMPS

AMPACITY

(AMPS)

58.9

EACH

None

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

2CE04513006

None

4.0

5.6

8.0

11.9

15.9

22.2

5.3

7.5

10.6

15.9

21.2

29.6

4.0

5.6

8.0

11.9

15.9

22.2

5.3

7.5

10.6

15.9

21.2

29.6

19.2

26.9

38.5

57.2

76.4

106.7

22.1

31.3

44.2

66.3

88.3

123.3

11.1

15.5

22.2

33.0

44.1

61.6

12.7

18.0

25.5

38.2

51.0

71.2

58.9

59.4

73.8

97.3

121.3

159.2

58.9

64.8

100

125

175

208-1-60

28.8

17.3

145.0

123.0

2.3

10.6

10.0

2CE04510506

2CE04510706

2CE04511006

2CE04511506

2CE04512006

2CE04513006

None

230-1-60

208-3-60

230-3-60

81.0

108.6

136.2

179.9

44.5

45.2

53.5

67.0

80.9

102.8

44.5

48.3

57.6

73.6

89.5

114.8

23.6

28.1

110

150

200

110

125

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

2CE04513025

None

DY060

2CE04510525

2CE04510725

2CE04511025

2CE04511525

2CE04512025

2CE04513025

None

2CE04510746

2CE04511046

2CE04511546

2CE04512046

2CE04513046

None

6.8

8.2

10.1

13.6

19.5

28.8

10.6

15.9

21.2

30.4

12.1

16.4

23.5

34.6

10.2

15.3

20.4

29.3

460-3-60

575-3-60

9.6

7.4

70.0

53.0

1.3

10.6

5.0

4.0

33.3

42.2

56.2

18.5

23.0

29.4

35.8

46.9

2CE04511058

2CE04511558

2CE04512058

2CE04513058

1. HACR Type per NEC.

2. These electric heaters do not include a fuse box. If a fuse box is required to meet a local code (i.e. Chicago), the fuse block

accessories 2FB04700825 and 2FB04700846 are available for field installation.

Unitary Products Group

343615-YTG-A-0807

TABLE 25: DY PHYSICAL DATA

048

12 X 10

MODELS

036

12 X 10

3/4

060

12 X 10

Centrifugal Blower (Dia. x Wd. in.)

Fan Motor HP (Direct Drive)

Rows Deep

EVAPORATOR

BLOWER

EVAPORATOR

COIL

Fins Per Inch

Face Area (Ft. )

5.1

Propeller Dia. (in.)

Fan Motor HP

Nom. CFM

CONDENSER

FANS

1/2

4200

1/2

4200

1/2

4200

Rows Deep

CONDENSER

COILS

Fins Per Inch

Face Area (Ft. )

17.1

Quantity

COMPRESSOR

Type

Recip.

Scroll

Quantity Per Unit (15” X 20” X 1” or 2“)

Quantity Per Unit (14” X 25” X 1” or 2“)

AIR

FILTERS

Total Face Area (Ft. )

6.3

9/4

6.3

9/8

6.3

11/8

CHARGE

Refrigerant 22 (lbs./oz.)

TABLE 26: ELECTRIC HEAT CORRECTION FACTORS

kW CAP. MULTI-

TABLE 27: VOLTAGE LIMITATIONS

VOLTAGE

NOMINAL VOLTAGE

VOLTAGE

POWER SUPPLY

PLIER

MIN.

MAX.

208

230

460

575

1.00

0.92

208

240

480

600

208/230-1-60

208/230-3-60

187

252

187

460-3-60

575-3-60

432

540

504

630

1. Utilization Range “A” in accordance with ARI Standard

110.

Unitary Products Group

343615-YTG-A-0807

TYPICAL POWER WIRING

REFER TO THE ELECTRICAL DATA

TABLES TO SIZE THE DISCONNECT

SWITCH, OVERCURRENT PROTEC-

TION AND WIRING.

TYPICAL CONTROL WIRING

COOLING ONLY (24 VOLT THERMOSTAT)

COOLING / HEATING (24 VOLT THERMOSTAT)

THERMOSTAT¹UNIT TERMINAL

THERMOSTAT¹

TERMINALS

STRIP TB1

UNIT TERMINAL

STRIP TB1

ADD

JUMPER

24 VOLT

TRANSFORMER

24 VOLT

TRANSFORMER

¹24 VOLT THERMOSTAT 2TH07701024. TO CONTROL THE ECONOMIZER

ON SECOND STAGE COOLING, USE THE THERMOSTAT 2TH0401224.

COOLING / HEATING (ELECTRONIC THERMOSTAT)

MULTI STAGE

24 VOLT THERMOSTAT 2ET07701024. TO CONTROL THE ECONOMIZER ON THE SECOND

STAGE COOLING OR TO HAVE AN ELECTRIC HEAT ACCESSORY WITH TWO STAGES OF

HEAT, USE THERMOSTAT 2TH0471024.

THERMOSTAT

TERMINALS

UNIT TERMINAL

STRIP TB1

24 VOLT

TRANSFORMER

ADD

JUMPER

COOLING / HEATING (ELECTRONIC THERMOSTAT)

SINGLE STAGE

THERMOSTAT¹

UNIT TERMINAL

STRIP TB1

TERMINALS

LED 1

ADD

JUMPER

NOT

USED

LED 2

COM

OCC

ADD

JUMPER

24 VOLT

TRANSFORMER

TO REMOTE SENSOR

2TH040702224 IF USED

¹ELECTRONIC PROGRAMMABLE THERMOSTAT 2ET04700224 (INCLUDES SUBBASE).

²SECOND STAGE COOLING IS NOT REQUIRED ON UNITS LESS ECONOMIZER.

¹ELECTRONIC PROGRAMMABLE THERMOSTAT 2ET07701024 (INCLUDES SUBBASE).

TO CONTROL THE ECONOMIZER ON SECOND STAGE COOLING, USE THERMOSTAT

2TH04700224.

³SECOND STAGE HEATING IS ONLY REQUIRED ON UNITS WITH A TWO STAGE

ELECTRIC HEATER OR 2 STAGE GAS HEAT.

REMOVE JUMPER J2 FROM TERMINALS 4 AND 9 ON JUMPER PLUG CONNECTOR

P6 ON UNITS WITH ECONOMIZER. TERMINALS A1 AND A2 PROVIDE A RELAY

OUT-PUT TO CLOSE THE OUTDOOR ECONOMIZER DAMPERS WHEN THE

THERMOSTAT SWITCHES TO THE SET-BACK POSITION.

FIGURE 2 - TYPICAL FIELD POWER & CONTROL WIRING

Unitary Products Group

343615-YTG-A-0807

FIGURE 3 - UNIT DIMENSIONS (3 - 5 TON COOLING ONLY/ELECTRIC HEAT) FRONT VIEW

FIGURE 4 - UNIT DIMENSIONS (3 - 5 TON COOLING/GAS HEAT) FRONT VIEW

Unitary Products Group

343615-YTG-A-0807

DETAIL “A”

FIGURE 5 - UNIT WITH ECONOMIZER RAINHOOD

DETAIL “B”

FIGURE 6 - UNIT WITH FIXED OUTDOOR AIR/MOTORIZED DAMPER RAINHOOD

Unitary Products Group

343615-YTG-A-0807

FIGURE 7 - UNIT DIMENSIONS (REAR VIEW)

TABLE 29: MINIMUM CLEARANCES

LOCATION

FILTER

ACCESS

CLEARANCE

24” (Cooling/Electric Heat)

32” (Gas Heat)

BLOWER MOTOR

ACCESS

Front

Rear

DOT PLUGS

12” (Less Economizer)

36” (With Economizer or Fixed

Air/Motorized Damper)

FIELD-SUPPLIED

DISCONNECT SWITCH

LOCATION

24” (Less Economizer)

36” (With Economizer)

Left Side (Filter Access)

MOUNTING BRACKET

FOR DICONNECT SWITCH

(Shipped attached to the

blower housing inside

Right Side (Cond. Coil)

Below Unit¹

24”

0”

A,B

the blower compartment)

WIRING ENTRY

(See Detail “B”)

CONTROL BOX

ACCESS

DISCONNECT SWITCH LOCATION

AND MOTOR ACCESS PANEL FOR

UNIT WITH “BELT-DRIVE” OPTION

72” (For

Condenser Air Discharge)

Above Unit²

FIGURE 8 - DISCONNECT/BLOWER ACCESS LOCATION

TABLE 28: UTILITIES ENTRY

1. Units may be installed on combustible floors made

from wood or class A, B, or C roof covering material.

2. Units must be installed outdoors. Overhanging struc-

tures or shrubs should not obstruct condenser air dis-

charge outlet.

HOLE

OPENING SIZE (DIA.)

USED FOR

Side

Bottom

Side

7/8” KO

Control Wiring

Power Wiring

2” KO

Bottom

1-5/8” KO

1-1/2” KO

Gas Piping (Front)

Gas Piping (Bottom)

1. Opening in the bottom to the unit can be located by the

side in the insulation.

2. Do not remove the 2” knockout ring.

Unitary Products Group

343615-YTG-A-0807

FIGURE 9 - TYPICAL APPLICATIONS

Unitary Products Group

343615-YTG-A-0807

BACK OF UNIT

44 /₈

82 /₄

APPROXIMATE

CENTER OF GRAVITY

CONDENSER COIL

END OF UNIT

CONDENSER COIL

END OF UNIT

FRONT OF UNIT

FIGURE 10 -FOUR AND SIX POINT LOADING

TABLE 30: DY 4 AND 6 POINT LOADS WEIGHT DISTRIBUTION

4-Point Loading (lb)

6-Point Loading (lb)

UNIT

TOTAL

132

141

143

145

148

134

145

150

135

147

149

151

125

133

135

138

140

127

138

142

128

139

141

143

155

166

168

171

174

158

171

177

159

173

175

178

164

175

178

181

184

167

181

187

168

182

185

188

102

110

111

113

115

104

113

117

105

114

116

118

106

114

115

117

119

108

117

121

109

118

120

122

110

118

120

122

124

112

122

125

113

123

125

126

DY036 Cooling/ Electric

DY036N04

575

615

625

635

645

585

635

655

590

640

650

660

DY036D06

DY036N08

DY036D10

DY048 Cooling/ Electric

DY048(D,N)06

DY048(D,N)10

DY060 Cooling/ Electric

DY060D06

101

100

102

DY060N08

DY060(D,N)10

TABLE 31: CENTER OF GRAVITY

DIMENSION

3 - 5 TON

40”

20”

Unitary Products Group

343615-YTG-A-0807

TABLE 32: OPERATING WEIGHTS (LBS.)

MODEL SIZE

DY (Cooling Only)

3 TON

575

615

4 TON

5 TON

590

585

N04

N06

N08

N10

D06

D10

635

BASIC

UNIT

635

650

660

640

660

(Gas/Electric)

655

635

655

625

645

Economizer

Motorized Damper

OPTIONS

ACCY.

5 - 7 kW

10 - 15 kW

20 - 30 kW

Electric Heater

Roof Curb

Barometric Relief / Fixed Air Damper

FIGURE 11 -ROOF CURB DIMENSIONS

Unitary Products Group

343615-YTG-A-0807

dures. Units shall be CSA listed, classified to ANSI Z21.47,

UL 1995/CSA No. 236 standards.

GUIDE SPECIFICATIONS

GENERAL

UNIT CABINET

Units shall be manufactured by York International Unitary

Products Group in an ISO 9001 certified facility.

Unit cabinet shall be constructed of G90 galvanized steel,

with exterior surfaces coated with a non-chalking, powdered

paint finish, certified at 1000 hours salt spray test per

ASTMB117 standards. Indoor blower section shall be insu-

lated with a minimum 1/2” thick insulation, coated on the air-

side. Aluminum foil faced insulation shall be used in the

furnace compartment and be fastened with ridged fasteners

to prevent insulation from entering the air stream. Cabinet

panels shall be “large” size, easily removable for servicing

and maintenance. Full perimeter base rails shall be provided

to assure reliable transit of equipment, overhead rigging and

proper sealing on roof curb applications. Disposable 1" filters

shall be furnished and be accessible through a removable

access door, sealed airtight. Units filter track shall be

designed to accommodate either 1" or 2" filters. Fan perfor-

mance measuring ports shall be provided on the outside of

the cabinet to allow accurate air measurements of evaporator

fan performance without removing panels or creating air by-

pass of the coils. Condensate pan shall be internally sloped

and conform to ASHRAE 62-89 self-draining standards. Con-

densate connection shall be a minimum of 3/4” I.D. female

and be a ridged mount connection.

York's Sunline Magnum™ units are convertible single pack-

age units. Although the units are primarily designed for curb

mounting on a roof, they can also be slab-mounted at ground

level or set on steel beams above a finished roof. Cooling

only, cooling with gas heat and cooling with electric heat

models are available with a wide variety of factory-mounted

options and field-installed accessories to make them suitable

for almost every application. All units are self-contained and

assembled on full perimeter base rails with holes in the four

corners for overhead rigging. Every unit is completely piped,

wired, charged and tested at the factory to simplify the field

installation and to provide years of dependable operation. All

models (including those with an economizer) are suitable for

either bottom or horizontal duct connections. Models with

power exhaust are suitable for bottom duct connections only.

For bottom duct, remove the sheet metal panels from the

supply and return air openings through the base of the unit.

For horizontal duct, remove the supply and return air panels

on the rear of the unit.

All non-Scroll compressors include crankcase heaters and all

compressors have internal pressure relief. Every refrigerant

circuit includes a liquid line filter-drier, a discharge line high

pressure switch and a suction line with a freezestat and low

pressure/loss of charge switch.The unit control circuit

includes a 75 VA transformer, a 24-volt circuit breaker and a

relay board with a compressor lockout circuit, a terminal strip

for thermostat wiring, plus an additional set of pin connectors

to simplify the interface of additional field controls. All models

are CSA listed. All models include a 1-year limited warranty

on the complete unit. Compressors and electric heater ele-

ments carry a 5-year warranty. Aluminized steel and Stainless

steel tubular heat exchangers carry a 10-year warranty.

INDOOR (EVAPORATOR) FAN ASSEMBLY

The indoor fan shall be a factory installed direct drive. Job

site selected (B.H.P.) brake horsepower shall not exceed the

motors nameplate horsepower rating, plus the service factor.

Units shall be designed not to operate above service factor.

Fan wheel shall be double-inlet type with forward-curved

blades, dynamically balanced to operate smoothly throughout

the entire range of operation. Airflow design shall be constant

air volume. Bearings shall be sealed and permanently lubri-

cated for longer life and no maintenance.

OUTDOOR (CONDENSER) FAN ASSEMBLY

The outdoor fan shall be of the direct-driven propeller type,

discharge air vertically, have aluminum blades riveted to a

corrosion resistant steel spider bracket and shall be dynami-

cally balanced for smooth operation. The outdoor fan motor

shall be totally enclosed with permanently lubricated bear-

ings, internally protected against overload conditions and

staged independently.

DESCRIPTION

Units shall be factory-assembled, single packaged, Electric

Cooling/Gas Heat, Electric Cooling/Optional Electric Heat

and designed for outdoor mounted installation.

The 3 ton, 4 ton and 5 ton units shall have minimum SEER

rating of 14. They shall have built-in field convertible duct

connections for down discharge supply/return or horizontal

discharge supply/return, and be available with factory

installed options or field installed accessories. The units shall

be factory wired, piped, charged with R-22 refrigerant and

factory tested prior to shipment. All unit wiring shall be both

numbered and color coded. All units the cooling performance

shall be rated in accordance with DOE and ARI test proce-

REFRIGERANT COMPONENTS

Compressor:

a. Shall be internally protected with internal high-pres-

sure relief and over temperature protection.

b. Shall have internal spring isolation and sound muf-

fling to minimize vibration and noise, and be exter-

nally isolated on a dedicated, independent mounting.

Unitary Products Group

343615-YTG-A-0807

Coils:

a. Evaporator and condenser coils shall have alumi-

stainless steel for corrosion resistance. The heat exchanger

shall be of the tubular type, constructed of T1-40 aluminized

steel for corrosion resistance and allowing minimum mixed

air entering temperature of 25°F. Burners shall be of the

inshot type, constructed of aluminum coated steel and con-

tain air mixture adjustments. All gas piping shall enter the unit

cabinet at a single location through either the side or curb

without any field modifications. Integrated control boards

shall provide timed control of evaporator fan functioning and

burner ignition. Heating section shall be provided with the fol-

lowing minimum protection:

num plate fins mechanically bonded to seamless

internally enhanced copper tubes with all joints

brazed. Special Phenolic coating shall be available

as a factory option.

b. Evaporator and Condenser coils shall be of the

direct expansion, draw-thru, design.

Refrigerant Circuit and Refrigerant Safety Components shall

include:

a. Independent fixed-orifice or thermally operated

expansion devices.

a. Primary and auxiliary high-temperature limit switches.

b. Induced draft motor speed sensor.

c. Flame roll out switch.

b. Filter drier/strainer to eliminate any moisture or for-

eign matter.

d. Flame proving controls.

c. Accessible service gage connections on both suc-

tion and liquid lines to charge, evacuate, and mea-

sure refrigerant pressure during any necessary

servicing or troubleshooting, without losing charge.

e. If any of the above safety devices trip, a LED (light-

emitting diode) indicator shall flash a diagnostic

code that indicates which safety switch has tripped.

d. The refrigeration system shall provide at least 15°F

of sub-cooling at design conditions.

ELECTRIC HEATING SECTION

An electric heating section, with nickel chromium elements,

shall be provided in a range of 5 thru 30 KW, offering two

stages of capacity - 16 KW and above on 208/230 volt heaters

and 20 KW and above on 460 and 575 volt heaters. The heat-

ing section shall have a primary limit control(s) and automatic

reset to prevent the heating element system from operating at

an excessive temperature. The heating section assembly

shall slide out of the unit for easy maintenance and service.

Units with Electric Heating shall be wired for a single point

power supply with branch circuit fusing (where required).

UNIT CONTROLS

a. Unit shall be complete with self-contained low-volt-

age control circuit protected by a resetable circuit

breaker on the 24-volt transformer side.

b. Unit shall incorporate a lockout circuit which pro-

vides reset capability at the space thermostat or

base unit, should any of the following standard

safety devices trip and shut off compressor.

c. Loss-of-charge/Low-pressure switch.

d. High-pressure switch.

UNIT OPERATING CHARACTERISTICS

a. Unit shall be capable of starting and running at 125°F

outdoor temperature, exceeding maximum load crite-

ria of ARI Standard 210/240. The compressor, with

standard controls, shall be capable of operation

down to 0°F outdoor temperature. Unit shall be pro-

vided with fan time delay to prevent cold air delivery

before heat exchanger warms up (Gas heat only).

e. Freeze-protection thermostat, evaporator coil.

f. Unit shall incorporate “AUTO RESET” compressor

over temperature, over current protection.

g. Unit shall operate with conventional thermostat

designs and have a low voltage terminal strip for

easy hook-up.

ELECTRICAL REQUIREMENTS

h. Unit control board shall have on-board diagnostics

and fault code display.

All unit power wiring shall enter unit cabinet at a single factory

provided location and be capable of side or bottom entry, to

minimize roof penetrations and avoid unit field modifications.

Separate side and bottom openings shall be provided for the

control wiring.

Standard controls shall include anti-short cycle and

low voltage protection, and permit cooling operation

down to 0°F.

Control board shall monitor each refrigerant safety

switch independently.

STANDARD LIMITED WARRANTIES

k. Control board shall retain last 5 fault codes in non

volatile memory which will not be lost in the event of

a power loss.

•

Compressor 5 Years

Heat Exchanger 10 Years

Electric Heat Element 5 Years

Other Parts 1 Year

GAS HEATING SECTION (SINGLE OR 2 STAGE)

Shall be designed with induced draft combustion with post

purge logic, energy saving direct spark ignition, and redun-

dant main gas valve. Venter wheel shall be constructed of

Unitary Products Group

343615-YTG-A-0807

OPTIONAL OUTDOOR AIR (Shall be made available by

either/or):

•

HIGH ALTITUDE - PROPANE GAS - Contains orifices

required for applications between 2000 and 6000 feet

altitude. Must be used with propane conversion kit.

•

ELECTRONIC ENTHALPY AUTOMATIC ECONO-

MIZER- Outdoor and return air dampers that are inter-

locked and positioned by a fully-modulating, spring

return damper actuator. The maximum leakage rate for

the outdoor air intake dampers shall not exceed 2%

when dampers are fully closed and operating against a

pressure differential of 0.5 IWG. A unit-mounted potenti-

ometer shall be provided to adjust the outdoor and return

air damper assembly to take in CFM of outdoor air to

meet the minimum ventilation requirement of the condi-

tioned space during normal operation. During econo-

mizer operation, a mixed-air temperature control shall

modulate the outdoor and return air damper assembly to

prevent the supply air temperature from dropping below

55°F. Changeover from compressor to economizer oper-

ation shall be provided by an integral electronic enthalpy

control that feeds input into the basic module. The out-

door intake opening shall be covered with a rain hood

that matches the exterior of the unit. Water eliminator/fil-

ters shall be provided. Simultaneous economizer/com-

pressor operation is also possible. Dampers shall fully

close on power loss.

•

LOW NOX - Required to reduce the emission of nitrogen

oxides below 40 nanograms per joule.

GAS PIPING - Contains 1/2” pipe nipples, fittings and

gas cock (including panel assess gaskets) required for

bottom gas supply connection with external shut off.

•

POWER EXHAUST OPTION - To work in conjunction

with economizers.

•

ELECTRIC HEATERS

•

ECONOMIZER/MOTORIZED DAMPER RAIN HOOD -

Contains all hood panels and the hardware for assem-

bling.

•

MANUAL OUTDOOR AIR DAMPER

COIL GUARD KIT - Guard for cooling coil.

HAIL GUARD

FLUE EXHAUST EXTENSION

OTHER FACTORY INSTALLED OPTIONS

•

POWER EXHAUST OPTION - To work in conjunction

•

MOTORIZED OUTDOOR AIR DAMPERS - Outdoor air

dampers are positioned by a 2-position, spring-return

damper actuator. The maximum leakage rate for the out-

door air intake dampers shall not exceed 2% when

dampers are fully closed and operating against a pres-

sure differential of 0.5 IWG. A unit-mounted potentiome-

ter shall be provided to adjust the outdoor damper

assembly to take in the design CFM of outdoor air to

meet the ventilation requirements of the conditioned

space during normal operation. Whenever the indoor fan

motor is energized, the dampers open up to one of two

pre-selected positions - regardless of the outdoor air

enthalpy. Dampers return to the fully closed position

when the indoor fan motor is de-energized. Dampers

shall fully close on power loss.

with economizers.

•

STAINLESS STEEL HEAT EXCHANGER

STAINLESS STEEL DRAIN PAN

BOTTOM DRAIN CONNECTION

TECHNICOAT PHENOLIC COATED CONDENSER

AND EVAPORATOR COIL

•

ELECTRONIC SINGLE ENTHALPY ECONOMIZER

DIRTY FILTER SWITCH

PHASE MONITOR

COIL GUARD

POWERED GFI CONVENIENCE OUTLET

NON-POWERED GFI CONVENIENCE OUTLET

OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE

BAS CONTROLS (S implicity INTELLI-Comfort™,

CPC, JOHNSON, HONEYWELL, NOVAR)

•

ROOF CURB - 14"and 8” high, full perimeter curb with

wood nailer (shipped knocked-down).

•

BAS READY ECONOMIZER (2-10 V.D.C. ACTUATOR

WITHOUT A CONTROLLER)

•

BAROMETRIC RELIEF DAMPER - Contains a rain

hood, air inlet screen, exhaust damper and mounting

hardware. Used to relieve internal air pressure through

the unit.

HINGED FILTER DOOR ACCESS AND TOOLESS

ACCESS PANELS

•

2" PLEATED FILTERS

•

PROPANE CONVERSION KIT - Contains new orifices

and gas valve parts to convert from natural to L.P. gas.

One per unit required.

DISCONNECT SWITCH

SUPPLY AIR SMOKE DETECTOR

RETURN AIR SMOKE DETECTOR

HIGH ALTITUDE - NATURAL GAS - Contains orifices

required for applications between 2000 and 6000 feet

altitude.

Unitary Products Group

343615-YTG-A-0807

Unitary Products Group

343615-YTG-A-0807

Unitary Products Group

Subject to change without notice. Printed in U.S.A.

343615-YTG-A-0807

Supersedes: Nothing

Unitary

Products

Group

5005

York

Drive

Norman

73069

Lifebreath Console Air Cleaner User Manual
Quasar H2w051nh User Manual
Schumacher E Charge Ec 4000 Usb User Manual
Sharp Fp N40cx User Manual
Soleus Air Gm Pac 08e3 User Manual
Soleus Air Ph1 10r 03 User Manual
Sunbeam Air Conditioner Ky 25 User Manual
Whirlpool Acs102xg User Manual
Xerox 5760 User Manual
Xerox Phaser 3100mfp User Manual