840569-YTG-A-0612
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile cli-
mate system. It is designed with a matching indoor coil compo-
nent from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with acces-
sories and documents to serve specific functions.
FEATURES
• Small Footprint - Extremely lightweight with a compact foot-
TECHNICAL GUIDE
print, it is a perfect fit for any application.
LX SERIES
• Quality Condenser Coils - The coil is constructed of alumi-
num microchannel tubing and enhanced aluminum fins for
reduced size and increased efficiency.
SPLIT-SYSTEM AIR CONDITIONERS
13 SEER – R-410A – 1 PHASE
(1.5 THRU 5 NOMINAL TONS)
MODELS: YCJD18 THRU 60
• Coil Protection - Coils are protected from damage by a slot-
ted, stamped steel coil guard and secondary polymer mesh.
®
• Optional Factory E-Coat - Available ElectroFin coated coil
on select models.
• Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the
compressor against moisture and debris.
• Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly per-
formance with zero ozone depletion.
• Durable Finish - The cabinet is made of G90-equivalent pre-
painted steel, with special primer formulas and matte cham-
pagne texture to insure less fading when exposed to sun-
light. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
• Top Discharge - Warm air from the top mounted fan is blown
up, away fro0m the structure and any landscaping. This
allows compact location on multi-unit applications.
®
• Low Operating Sound Levels - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the nor-
mal fan motor and compressor operating sounds.
Due to continuous product improvement, specifications are
subject to change without notice.
• Low Maintenance - Long life, permanently lubricated motor-
bearings need no annual servicing.
Visit us on the web at
Additional rating information can be found at:
• Easy Service Access - Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
• Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
840569-YTG-A-0612
System Charge for Various Matched Systems
YCJD18
YCJD24
YCJD30
YCJD36
YCJD42
YCJD48
YCJD60
S41S1(E)
Outdoor Unit
S41S1(H)(E) S41S1(H)(E) S41S1(H)(E) S41S1(H)(E) S41S2(H)(E) S41S1(H)(E)
Required Orifice or TXV 1,2
0.048/4F1
0.055/4F1
0.061/4F1
0.065/4G1
0.073/4G1
0.073/4H1
0.087/4J1
Indoor Unit 3,4,5
AHE18B
AHE24B
AHE30B
AHE36C
AHE42D
AHE48D
AHE60D
AHP18
Additional Charge, oz.
0
–
4
4
4
–
–
–
–
4
–
–
–
–
–
4
–
–
–
–
–
–
4
4
–
–
–
–
4
–
–
–
0
–
–
–
–
–
4
4
–
–
–
–
4
4
0
4
–
–
0
2
–
–
–
–
0
2
–
–
–
–
–
0
2
–
–
–
–
0
2
–
–
–
–
2
–
–
–
–
0
–
–
–
–
0
0
–
–
–
–
0
0
–
2
–
–
–
0
8
–
–
–
–
0
0
–
–
–
–
–
0
8
–
–
–
–
0
8
–
–
–
0
–
–
–
–
–
–
8
–
–
–
–
8
–
–
–
–
–
–
0
–
–
–
–
–
–
0
–
–
–
–
–
0
0
–
–
–
–
–
0
–
–
–
–
–
0
–
–
–
0
0
–
–
–
0
4
0
–
–
–
–
0
–
–
–
–
–
–
–
–
–
–
–
–
4
–
–
–
–
–
0
–
–
–
–
–
–
4
–
–
–
–
–
4
–
–
–
0
–
–
–
0
–
0
–
–
–
–
–
4
–
–
–
–
–
–
–
–
–
–
–
–
10
–
9
–
14
0
–
AHP30
–
–
AHP36
–
–
AHP42
–
0
AHP48
–
10
AHP60
–
10
AHR18B
AHR24B
AHR30B
AHR36B
AHR42C
AHR48D
AHR60D
AHX18
0
–
–
–
–
–
–
–
–
10
–
9
–
15
0
–
AHX30
–
–
AHX36
–
–
AHX42
–
10
AHX48
–
9
AHX60
–
15
AV*24
TXV + 0
–
AV*36
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
0
–
–
–
–
–
AV*48
TXV + 10
AV*60
TXV + 10
F4FP024
F4FP036
F4FP040
F4FV060
F5FP048
F5FP060
F6FP018
F6FP030
F6FP036
F6FP042
F6FP048
F6FP060
FC/MC/PC18
FC/MC/PC32
FC/MC/PC35
FC/MC/PC36
FC/MC/PC37
For Notes See Page 4.
–
–
–
–
–
–
–
–
–
4
TXV + 9
15
–
–
–
–
–
Johnson Controls Unitary Products
3
840569-YTG-A-0612
System Charge for Various Matched Systems (Continued)
YCJD18
YCJD24
YCJD30
YCJD36
YCJD42
YCJD48
YCJD60
S41S1(E)
Outdoor Unit
S41S1(H)(E) S41S1(H)(E) S41S1(H)(E) S41S1(H)(E) S41S2(H)(E) S41S1(H)(E)
Required Orifice or TXV 1,2
0.048/4F1
0.055/4F1
0.061/4F1
0.065/4G1
0.073/4G1
0.073/4H1
0.087/4J1
Indoor Unit 3,4,5
FC/MC/PC43
FC/MC/PC48
FC/MC/PC60
FC/MC62
FC64
Additional Charge, oz.
–
–
–
–
–
0
–
–
–
4
–
–
–
–
–
0
–
–
2
–
–
–
–
–
–
–
–
0
8
–
–
–
–
–
8
–
0
10
9
–
4
0
–
–
–
–
4
0
–
–
0
14
23
–
4
11
–
UC18
UC36
–
–
UC48
4
–
UC60
9
0
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling Performance Data tables for actual system performance for specified system matches.
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
Models 12-48 require Hard Start Kits for TXV matches. Models with “H” on the end of the model number have factory installed Hard Start Kits.
For models without an “H” refer to the Hard Start Kit Accessory Installation Manual for the Hard Start Kit part number for each model.
4
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With Air Handler Coils
AIR HANDLER
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH AIR HANDLERS
AHE18B
AHP18
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
21.0
17.5
17.5
17.5
21.0
21.0
21.0
21.0
21.0
17.5
17.5
17.5
17.5
17.5
17.5
17.5
21.0
17.5
21.0
17.5
17.5
17.5
21.0
21.0
21.0
21.0
21.0
17.5
17.5
21.0
21.0
17.5
17.5
21.0
21.0
–
610
650
17.9
17.5
17.8
18.0
18.0
17.5
17.8
17.5
17.9
24.4
24.4
25.2
24.0
23.8
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.0
24.8
24.2
24.6
29.4
30.2
29.0
29.0
29.4
29.8
29.4
30.0
30.0
29.0
29.2
29.4
29.0
29.0
30.0
30.0
30.0
30.4
30.0
30.2
13.8
12.9
13.8
13.8
13.5
12.9
13.3
13.3
13.5
17.4
17.4
18.5
16.8
16.5
16.9
16.9
17.4
16.7
16.8
17.0
17.4
17.4
17.3
17.4
16.9
17.1
21.4
22.0
21.0
21.0
22.2
22.0
22.2
22.3
21.8
21.0
21.6
21.4
21.6
21.6
21.6
21.6
22.6
23.0
22.2
21.8
14.75
13.00
13.00
14.50
14.50
13.00
14.50
14.00
14.75
14.50
14.50
15.00
13.00
13.00
14.50
14.50
14.00
13.00
14.00
14.00
14.00
14.00
14.00
15.00
14.75
14.75
14.00
14.75
13.00
13.00
13.00
13.00
14.00
14.50
14.50
13.00
13.60
14.00
14.00
14.00
14.00
14.00
14.25
14.50
14.75
15.00
12.25
11.00
11.00
12.00
12.00
11.00
12.00
12.50
12.50
12.00
12.00
12.50
11.00
11.00
12.00
12.00
12.00
11.00
11.80
12.00
12.00
12.00
12.00
12.50
12.25
12.50
11.75
12.25
11.00
11.00
11.00
11.00
11.75
12.00
12.00
11.00
11.40
12.00
12.00
12.00
12.00
12.00
12.00
12.25
12.50
12.50
–
AHR18B
AHX18
–
665
-
630
YCJD18S41S1(H)(E)
AV*24
–
610
F4FP024
F6FP018
MV12B
MX12B
AHE24B
AHE30B
AHE36C
AHP30
–
600
-
600
FC/MC18B
600
FC/MC18B
585
–
795
–
795
–
855
–
795
AHR24B
AHX30
–
740
–
820
AHX36
–
815
AV*36
–
725
YCJD24S41S1(H)(E)
F4FP036
F6FP030
F6FP036
MV12B
MV12B
MV12B
MX12B
MX12B
MX12B
AHE30B
AHE36C
AHP30
–
855
–
850
–
855
FC/MC35B
800
FC/MC36B
800
FC/MC43B
800
FC/MC35B
815
FC/MC36B
745
FC/MC43B
735
–
985
–
1000
1015
1040
1095
1060
1025
1005
960
–
AHP36
–
AHR30B
AHR36B
AHX30
–
–
–
AHX36
–
AV*36
–
F4FP040
F6FP030
F6FP036
MV12B
MV12B
MV16C
MV16C
MX12B
MX12B
MX16C
MX16C
–
1050
1035
980
YCJD30S41S1(H)(E)
–
–
FC/MC35B
FC/MC43B
FC/MC35C
FC/MC43C
FC/MC35B
FC/MC43B
FC/MC35C
FC/MC43C
1000
1000
1000
1000
1085
1095
1035
970
For Notes See Page 7.
Johnson Controls Unitary Products
5
840569-YTG-A-0612
COOLING CAPACITY - With Air Handler Coils (Continued)
AIR HANDLER
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH AIR HANDLERS
AHE36C
AHE42D
AHP36
AHP42
AHR36B
AHR42C
AHX36
AHX42
AV*36
21.0
24.5
21.0
21.0
17.5
21.0
21.0
24.5
21.0
24.5
24.5
17.5
24.5
21.0
21.0
24.5
17.5
24.5
21.0
21.0
24.5
24.5
24.5
21.0
24.5
24.5
21.0
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
21.0
21.0
21.0
24.5
24.5
24.5
24.5
21.0
21.0
21.0
24.5
24.5
24.5
24.5
–
1190
1180
1235
1255
1245
1230
1225
1190
1190
1235
1290
1225
1135
1200
1200
1200
1220
1225
1140
1150
1385
1385
1390
1485
1400
1400
1485
1320
1350
1395
1445
1440
1385
1360
1455
1380
1475
1380
1400
1400
1470
1400
1400
1400
1365
1390
1420
1415
1470
1470
1470
35.6
35.8
35.0
35.0
34.6
35.6
35.2
35.4
35.0
35.0
35.8
35.4
35.0
36.0
36.0
36.0
35.4
36.0
35.4
36.2
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
25.4
25.8
24.8
24.8
24.6
25.4
25.0
25.2
25.2
24.8
25.8
25.2
25.4
25.4
25.4
25.6
25.2
25.6
25.0
25.6
30.6
30.4
31.0
30.6
30.2
30.0
30.8
28.8
30.2
30.4
30.8
31.2
30.4
30.4
31.0
30.2
31.4
30.2
30.4
30.0
31.0
30.2
30.8
30.8
30.2
30.2
30.0
30.2
30.8
31.6
31.6
14.25
14.50
13.00
13.00
13.00
13.00
13.50
14.00
14.00
13.00
13.50
14.00
14.00
14.00
14.00
14.00
13.75
14.25
14.50
14.75
14.25
14.00
14.50
13.00
13.25
14.00
13.00
13.00
13.00
14.25
14.25
14.25
14.25
14.25
14.00
14.00
14.00
14.00
13.75
13.75
14.25
14.00
14.00
14.50
14.25
14.25
14.00
14.25
14.25
14.50
14.75
12.00
12.25
11.00
11.00
11.00
11.25
11.50
11.80
12.00
11.00
11.50
11.75
12.00
12.00
12.00
12.00
11.75
12.25
12.25
12.50
12.00
12.00
12.00
11.00
11.25
11.75
11.00
11.00
11.00
12.00
12.00
12.00
12.00
12.00
11.75
11.75
11.75
12.00
11.75
11.50
12.00
11.75
12.00
12.25
12.00
12.00
12.00
12.00
12.00
12.25
12.50
–
–
–
–
–
–
–
–
F5FP048
F6FP042
MV12B
MV12D
MV16C
MV16C
MV20D
MX12B
MX12D
MX16C
MX16C
AHE42D
AHE48D
AHE60D
AHP42
AHP48
AHP60
AHR42C
AHR48D
AHR60D
AHX42
AHX48
AHX60
AV*48
–
YCJD36S41S1(H)(E)
–
FC/MC43B
FC/MC48D
FC/MC43C
FC/MC48C
FC/MC48D
FC/MC43B
FC/MC48D
FC/MC43C
FC/MC48C
–
–
–
–
–
–
–
–
–
–
–
–
–
AV*60
–
F6FP042
F6FP048
F6FP060
MV16C
MV16C
MV16C
MV20D
MV20D
MV20D
MV20D
MX16C
MX16C
MX16C
MX20D
MX20D
MX20D
MX20D
–
YCJD42S41S2(H)(E)
–
–
FC/MC43C
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
FC/MC62D
FC64D
FC/MC43C
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
FC/MC62D
FC64D
For Notes See Page 7.
6
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With Air Handler Coils (Continued)
AIR HANDLER
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH AIR HANDLERS
AHE48D
AHP48
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
21.0
21.0
24.5
24.5
21.0
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
–
1600
1675
1600
1610
1660
1625
1560
1600
1600
1600
1625
1600
1625
1600
1600
1685
1525
1585
1835
1850
1870
1905
1730
1780
1900
1710
1800
1800
1855
1780
1795
1795
47.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
47.0
48.0
47.5
48.0
48.0
48.5
48.0
48.5
58.5
57.0
57.0
58.5
58.0
57.0
57.0
57.5
57.0
57.0
57.0
57.5
58.0
58.5
34.6
34.4
35.0
34.6
35.4
35.0
35.0
34.6
34.4
34.4
34.8
35.0
34.6
35.0
35.0
35.6
34.2
34.6
39.8
38.5
38.5
40.0
39.0
38.5
38.5
39.0
38.5
38.5
39.0
38.8
38.8
39.8
13.75
13.00
13.50
13.00
13.50
13.50
13.50
14.00
13.00
13.00
13.00
13.50
13.50
13.50
13.50
13.75
14.00
14.00
13.50
13.00
13.00
13.50
13.50
13.50
13.00
13.50
13.00
13.00
13.75
13.75
14.00
14.50
11.50
11.00
11.00
11.00
11.50
12.00
12.00
11.50
11.00
11.00
11.30
12.00
11.50
12.00
12.00
11.50
11.75
12.00
11.50
11.00
11.00
11.50
11.00
11.00
11.00
11.50
11.00
11.00
11.50
11.50
11.75
12.00
–
AHP60
–
AHR48D
AHX48
–
–
AV*48
–
AV*60
–
F4FV060
F5FP048
F5FP060
F6FP048
MV16C
MV16C
MV20D
MV20D
MX16C
MX20D
MX20D
AHE60D
AHP60
–
–
YCJD48S41S1(H)(E)
–
–
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
FC/MC48C
FC/MC48D
FC/MC60D
–
–
AHR60D
AHX60
–
–
AV*60
–
F4FV060
F5FP060
F6FP060
MV20D
MV20D
MV20D
MX20D
MX20D
MX20D
–
–
YCJD60S41S1(E)
–
FC/MC60D
FC/MC62D
FC64D
FC/MC60D
FC/MC62D
FC64D
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240.
Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
Johnson Controls Unitary Products
7
840569-YTG-A-0612
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
COIL
COOLING
CFM RANGE
(MIN.-MAX.)
NET MBH
UNIT MODEL
RATED
CFM
MODEL
WIDTH
SEER 1
EER
TOTAL
SENS.
13 SEER AC COIL ONLY RATINGS
FC/MC/PC18
UC18
14.5,17.5
14.5,17.5
14.5
450-750
450-750
600
600
17.5
17.5
24.0
24.0
24.0
24.0
24.0
24.0
29.0
29.0
29.0
29.0
35.0
35.0
35.0
35.0
41.5
42.0
41.5
42.0
42.0
42.0
48.0
48.0
48.0
48.0
57.0
57.0
57.0
57.0
12.9
12.9
16.7
16.7
16.7
16.7
16.7
16.7
21.0
21.0
21.0
21.0
24.8
24.8
24.8
24.8
29.8
30.0
29.6
30.4
30.8
30.0
34.4
34.4
34.4
34.4
38.5
38.5
39.0
38.5
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.25
13.00
13.00
13.00
13.00
13.00
13.00
13.00
13.50
13.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.25
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.25
11.00
YCJD18S41S1(H)(E)
FC/MC/PC32
FC/MC/PC35
600-1000
600-1000
600-1000
600-1000
600-1000
600-1000
800-1200
800-1200
800-1200
800-1200
1000-1400
1000-1400
1000-1400
1000-1400
1200-1600
1200-1600
1200-1600
1200-1600
1200-1600
1200-1600
1400-1800
1400-1800
1400-1800
1400-1800
1600-2000
1600-2000
1600-2000
1600-2000
800
17.5,21.0
800
FC/MC/PC36 14.5,17.5,21.0
800
YCJD24S41S1(H)(E)
FC/MC/PC37
FC/MC/PC43
UC36
14.5
17.5,21.0
14.5,17.5,21.0
14.5
800
800
800
FC/MC/PC32
FC/MC/PC35
FC/MC/PC37
FC/MC/PC43
FC/MC/PC37
FC/MC/PC43
FC/MC/PC48
UC48
1000
1000
1000
1000
1200
1200
1200
1200
1400
1400
1400
1400
1400
1400
1600
1600
1600
1600
1800
1800
1800
1800
17.5,21.0
14.5
YCJD30S41S1(H)(E)
YCJD36S41S1(H)(E)
17.5,21.0
14.5
17.5,21.0
21.0,24.5
21.0,24.5
17.5,21.0
21.0,24.5
21.0,24.5
24.5
FC/MC/PC43
FC/MC/PC48
FC/MC/PC60
FC/MC62
YCJD42S41S2(H)(E)
FC64
24.5
UC48
21.0,24.5
21.0,24.5
21.0,24.5
21.0,24.5
21.0,24.5
21.0,24.5
24.5
FC/MC/PC48
FC/MC/PC60
UC48
YCJD48S41S1(H)(E)
YCJD60S41S1(E)
UC60
FC/MC/PC60
FC/MC62
FC64
24.5
UC60
21.0,24.5
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
8
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*9V*A10
14.5
14.5
17.5
17.5
14.5
14.5
17.5
17.5
14.5
17.5
17.5
14.5
17.5
17.5
14.5
14.5
17.5
17.5
17.5
17.5
14.5
14.5
14.5
14.5
17.5
17.5
17.5
17.5
14.5
14.5
14.5
17.5
17.5
17.5
14.5
14.5
14.5
17.5
17.5
17.5
17.5
14.5
14.5
14.5
17.5
21.0
21.0
21.0
21.0
14.5
14.5
14.5
FC/MC/PC18A
UC18A
620
620
580
580
540
590
580
595
580
610
610
575
590
590
620
620
580
580
610
610
775
805
805
805
760
765
760
765
800
815
840
850
835
865
785
790
790
815
815
800
815
745
760
740
775
715
770
825
810
775
805
805
17.5
17.5
17.5
17.5
17.7
17.7
18.0
18.0
18.0
17.5
17.5
17.7
18.0
18.0
17.5
17.5
17.5
17.5
17.5
17.5
24.0
24.0
24.0
23.6
24.0
24.0
24.0
23.6
24.0
24.0
24.0
24.0
24.0
24.0
24.2
24.0
24.6
24.0
24.0
24.0
23.6
24.0
24.2
24.4
24.0
23.8
24.0
24.0
24.0
24.0
24.0
24.0
12.7
12.7
12.6
12.5
12.9
13.4
13.4
13.4
13.3
12.8
12.6
12.9
13.4
13.4
12.7
12.7
12.6
12.5
12.8
12.6
17.0
16.9
17.0
16.6
16.8
17.0
16.9
16.7
16.9
16.8
17.0
17.0
16.8
17.0
16.9
16.8
17.2
17.1
16.9
17.0
16.7
16.8
16.9
17.1
16.8
16.3
16.8
17.0
16.8
17.0
16.9
17.0
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.00
14.50
14.50
14.25
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.50
14.00
14.00
14.00
13.80
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
13.75
13.50
13.75
14.00
14.00
14.00
13.80
13.75
13.75
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
14.00
12.50
12.00
12.00
12.00
12.50
12.00
12.50
12.00
12.50
12.50
12.50
12.00
12.50
12.00
12.50
12.00
12.00
12.00
12.50
12.50
11.50
12.00
12.00
11.50
12.00
12.00
12.00
11.50
11.50
12.00
12.00
12.00
12.00
12.00
11.50
11.50
11.75
12.00
12.00
12.00
11.50
11.75
11.75
11.75
12.00
12.00
12.00
12.00
12.00
11.50
12.00
12.00
FC/MC/PC18B
UC18B
FC/MC/PC18A
UC18A
FC/MC/PC18B
UC18B
FC/MC/PC18A
FC/MC/PC18B
UC18B
T*9(C,V)*B12
T*9(C,V)*B12
T*9X*A10
YCJD18S41S1(H)(E)
FC/MC/PC18A
FC/MC/PC18B
UC18B
T*9X*B12
T*9X*B12
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*9C*B12
FC/MC/PC18A
UC18A
FC/MC/PC18B
UC18B
FC/MC/PC18B
UC18B
Y*9C*B12
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*(8,L)X*B12
T*9V*A10
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
UC36A
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
T*9V*A10
YCJD24S41S1(H)(E)
T*9V*A10
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*B12
T*9X*A10
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC36B
FC/MC/PC35C
FC/MC/PC36C
FC/MC/PC35C
FC/MC/PC36C
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
T*9X*A10
T*9X*A10
T*9X*B12
T*9X*C16
T*9X*C16
T*9X*C20
T*9X*C20
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*A12
For notes see Page 15.
Johnson Controls Unitary Products
9
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*9C*B12
14.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
14.5
14.5
17.5
17.5
21.0
21.0
21.0
21.0
14.5
14.5
17.5
17.5
21.0
21.0
21.0
21.0
17.5
17.5
21.0
21.0
21.0
21.0
17.5
17.5
21.0
21.0
21.0
14.5
14.5
17.5
17.5
21.0
21.0
21.0
21.0
17.5
17.5
21.0
21.0
21.0
21.0
UC36A
805
760
23.6
24.0
24.0
24.0
23.6
24.0
24.0
24.0
23.6
29.2
29.8
29.6
30.0
29.6
30.0
30.0
30.0
29.2
30.0
30.0
30.0
30.0
28.2
28.8
29.6
29.4
30.0
29.6
30.0
29.6
30.0
29.8
30.0
29.8
30.0
28.2
29.2
29.8
29.6
30.0
29.6
30.0
30.0
30.0
29.4
30.0
29.6
30.0
29.6
30.0
16.6
16.8
17.0
16.9
16.7
17.1
16.9
17.0
16.7
21.8
21.8
21.4
22.0
22.0
22.1
22.4
22.1
21.4
22.9
22.8
22.9
22.8
19.3
20.6
21.2
22.0
22.0
22.0
22.0
22.0
22.1
22.8
22.9
22.4
22.9
19.3
21.8
21.8
21.4
22.0
22.0
22.1
22.4
22.1
22.0
22.0
22.0
22.0
22.0
22.1
13.80
14.00
14.00
14.00
14.00
14.00
14.00
14.00
13.80
13.20
13.80
14.00
14.00
14.00
14.00
14.00
14.00
13.20
13.80
14.00
14.00
14.00
14.00
14.00
14.00
13.50
13.80
14.00
14.00
14.00
14.00
14.00
13.80
14.00
14.00
14.00
13.20
13.80
14.00
14.00
14.00
14.00
14.00
14.00
13.50
13.80
14.00
14.00
14.00
14.00
11.50
12.00
12.00
12.00
11.50
12.00
12.00
12.00
11.50
11.00
11.50
11.50
12.00
12.00
12.00
12.00
12.00
11.00
11.50
11.50
12.00
12.00
12.00
12.00
12.00
11.50
11.50
12.00
12.00
12.00
12.00
12.00
11.50
12.00
12.00
12.00
11.00
11.50
11.50
12.00
12.00
12.00
12.00
12.00
11.50
11.50
12.00
12.00
12.00
12.00
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
765
760
YCJD24S41S1(H)(E)
765
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
815
Y*9C*B12
815
Y*9C*B12
800
Y*9C*B12
815
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9X*B12
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
1045
980
995
990
1025
990
1080
1000
970
1105
1120
1125
1105
710
850
870
1045
1035
1005
1030
985
YCJD30S41S1(H)(E)
995
1085
1095
1075
1055
720
T*9X*B12
T*9X*C16
T*9X*C16
T*9X*C20
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*B12
1045
980
995
990
1025
990
1080
1000
1045
1035
1005
1030
985
Y*9C*B12
Y*9C*C16
Y*9C*C16
Y*9C*C20
Y*9C*C20
995
For notes see Page 15.
10
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*B12
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*B12
14.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
14.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
17.5
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
14.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
17.5
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
980
33.8
35.2
35.6
36.0
34.6
35.6
36.0
34.8
35.2
35.2
35.2
35.6
34.2
35.6
35.8
34.8
35.2
35.4
36.0
34.6
35.6
36.0
35.0
36.0
34.8
35.2
35.4
35.8
34.6
35.0
35.4
34.0
35.4
34.0
33.8
35.2
35.6
36.0
34.6
35.6
36.0
34.8
35.2
35.4
36.0
34.6
35.6
36.0
35.0
36.0
34.8
23.0
25.2
25.4
26.0
24.8
25.4
26.1
24.8
25.4
25.4
24.8
25.2
24.8
25.6
25.8
25.4
25.2
25.2
26.0
24.8
25.4
26.5
25.6
26.2
25.0
25.4
25.4
25.8
24.8
24.6
25.0
24.6
25.0
24.6
23.0
25.2
25.4
26.0
24.8
25.4
26.1
24.8
25.2
25.2
26.0
24.8
25.4
26.5
25.6
26.2
25.0
13.50
13.50
14.00
14.00
13.50
14.00
14.00
14.00
13.30
13.30
14.00
14.00
13.50
13.80
14.00
13.50
13.50
13.50
14.00
13.50
14.00
14.00
13.30
14.00
13.80
13.25
13.45
13.70
13.15
13.55
13.70
13.25
13.70
13.30
13.50
13.50
14.00
14.00
13.50
14.00
14.00
14.00
13.50
13.50
14.00
13.50
14.00
14.00
13.30
14.00
13.80
11.00
11.00
11.50
12.00
11.50
12.00
12.00
11.50
11.25
11.25
11.50
11.50
11.50
11.70
11.50
11.50
11.00
11.50
11.50
11.50
11.50
11.50
11.00
12.00
11.50
11.25
11.40
11.50
11.20
11.40
11.50
11.20
11.50
11.25
11.00
11.00
11.50
12.00
11.50
12.00
12.00
11.50
11.00
11.50
11.50
11.50
11.50
11.50
11.00
12.00
11.50
1210
1205
1210
1210
1190
1155
1155
1290
1300
1175
1185
1185
1250
1270
1300
1200
1240
1195
1195
1200
1330
1305
1240
1240
1270
1260
1280
1280
1185
1205
1205
1240
1240
980
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC48D
UC48D
YCJD36S41S1(H)(E)
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C20
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*9X*C20
T*9X*C20
T*9X*D20
FC/MC/PC48D
UC48D
T*9X*D20
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*B12
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
1210
1205
1210
1210
1190
1155
1155
1200
1240
1195
1195
1200
1330
1305
1240
1240
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C20
FC/MC/PC43C
FC/MC/PC48C
UC48C
Y*9C*C20
Y*9C*C20
Y*9C*D20
FC/MC/PC48D
UC48D
Y*9C*D20
For notes see Page 15.
Johnson Controls Unitary Products
11
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
17.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
17.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
1270
1390
1330
1330
1420
1420
1420
1420
1435
1420
1450
1410
1410
1340
1365
1340
1410
1410
1410
1300
1475
1360
1360
1360
1360
1360
1360
1400
1400
1415
1475
1475
1485
1485
1485
1485
1475
1485
1360
1395
1395
1445
1445
1445
1445
1395
1445
1395
1430
1430
1445
1445
1445
41.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.5
42.0
41.5
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
42.0
28.8
30.2
29.8
29.8
30.0
30.6
30.0
30.8
30.2
30.0
30.6
30.2
30.2
30.2
30.8
30.2
30.8
30.2
30.0
29.4
31.0
30.2
30.2
30.0
30.8
30.0
31.0
30.2
30.2
30.4
31.0
31.0
31.0
31.6
31.0
31.8
31.0
31.0
30.0
30.4
30.4
29.8
30.6
29.8
30.8
30.2
29.6
30.0
30.4
30.4
29.8
30.6
29.8
13.25
13.50
13.50
13.50
13.50
13.50
13.50
14.25
13.50
13.50
13.25
13.75
13.75
13.75
14.00
13.75
14.25
13.75
13.50
13.75
14.00
14.25
14.25
14.00
14.25
14.00
14.50
14.00
13.75
14.00
14.25
14.25
14.00
14.25
14.00
14.50
14.00
13.75
13.25
13.50
13.50
13.00
13.25
13.00
13.50
13.50
13.00
13.25
13.25
13.25
13.25
13.50
13.25
11.25
11.50
11.50
11.50
11.50
11.50
11.50
12.00
11.50
11.50
11.25
11.50
11.50
11.75
11.75
11.75
12.00
11.75
11.50
11.50
11.75
12.00
12.00
12.00
12.00
12.00
12.25
12.00
12.00
11.75
12.00
12.00
12.00
12.00
12.00
12.25
12.00
11.75
11.25
11.50
11.50
11.00
11.00
11.00
11.50
11.50
11.00
11.25
11.25
11.25
11.25
11.25
11.25
UC48C
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
YCJD42S41S2(H)(E)
UC48C
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
For notes see Page 15.
12
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*B12
21.0
21.0
21.0
24.5
24.5
24.5
24.5
24.5
24.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
24.5
24.5
24.5
24.5
17.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
FC64D
UC48C
1445
1430
1445
1450
1445
1455
1455
1450
1445
1270
1410
1425
1425
1460
1460
1460
1460
1425
1460
1400
1420
1420
1460
1460
1460
1460
1420
1460
1435
1515
1425
1425
1435
1515
1270
1390
1330
1330
1420
1420
1420
1420
1435
1420
1450
1410
1410
1340
1365
1340
1410
1410
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
41.5
41.5
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
30.8
30.2
29.8
30.2
30.0
30.6
30.6
30.2
29.8
29.0
30.2
30.4
30.4
30.0
30.6
30.0
30.8
30.4
30.0
30.4
30.4
30.4
30.2
30.8
30.2
30.8
30.4
30.0
30.4
31.0
30.8
30.8
30.0
31.4
28.8
30.2
29.8
29.8
30.0
30.6
30.0
30.8
30.2
30.0
30.6
30.2
30.2
30.2
30.8
30.2
30.8
30.2
13.75
13.25
13.00
13.50
13.50
13.50
14.00
13.50
13.25
13.50
13.75
13.75
13.75
13.75
13.75
13.75
14.25
13.75
13.50
14.00
14.00
14.00
13.75
14.00
13.75
14.50
14.00
13.75
14.00
14.00
14.00
14.50
14.00
13.75
13.25
13.50
13.50
13.50
13.50
13.50
13.50
14.25
13.50
13.50
13.25
13.75
13.75
13.75
14.00
13.75
14.25
13.75
11.75
11.25
11.25
11.50
11.50
11.50
11.75
11.50
11.25
11.50
11.50
11.75
11.75
11.50
11.75
11.50
12.00
11.75
11.50
11.75
11.75
11.75
11.75
11.75
11.75
12.25
11.75
11.75
12.00
12.00
12.00
12.25
12.00
12.00
11.25
11.50
11.50
11.50
11.50
11.50
11.50
12.00
11.50
11.50
11.25
11.50
11.50
11.75
11.75
11.75
12.00
11.75
UC60C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
UC48D
UC60D
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C16
T*9X*C16
UC48C
T*9X*C16
UC60C
T*9X*C20
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
T*9X*C20
YCJD42S41S2(H)(E)
T*9X*C20
UC48C
T*9X*C20
UC60C
T*9X*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
T*9X*D20
T*9X*D20
T*9X*D20
T*9X*D20
UC48D
T*9X*D20
UC60D
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
For notes see Page 15.
Johnson Controls Unitary Products
13
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
Y*(8,L)C*C20
Y*9C*C16
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
24.5
24.5
24.5
24.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
21.0
21.0
21.0
21.0
21.0
21.0
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
1410
1360
1395
1395
1445
1445
1445
1445
1395
1445
1395
1430
1430
1445
1445
1445
1445
1430
1445
1450
1445
1455
1455
1450
1445
1565
1600
1640
1625
1600
1605
1660
1595
1590
1590
1655
1655
1645
1615
1565
1575
1575
1615
1625
1625
1635
1490
1565
1600
1640
1625
1590
1590
42.0
42.0
42.0
42.0
41.5
42.0
41.5
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
42.0
42.0
42.0
41.5
42.0
42.0
42.0
42.0
42.0
41.5
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
48.0
47.0
47.0
48.0
47.0
47.0
48.0
47.5
48.0
48.0
48.0
48.0
48.0
48.0
30.0
30.0
30.4
30.4
29.8
30.6
29.8
30.8
30.2
29.6
30.0
30.4
30.4
29.8
30.6
29.8
30.8
30.2
29.8
30.2
30.0
30.6
30.6
30.2
29.8
35.0
35.0
35.0
35.0
34.4
34.6
34.4
34.8
34.6
35.2
34.8
35.2
35.2
35.0
34.8
34.6
34.6
34.4
34.6
34.6
34.8
33.8
35.0
35.0
35.0
35.0
34.6
35.2
13.50
13.25
13.50
13.50
13.00
13.25
13.00
13.50
13.50
13.00
13.25
13.25
13.25
13.25
13.50
13.25
13.75
13.25
13.00
13.50
13.50
13.50
14.00
13.50
13.25
13.30
13.30
13.20
13.50
13.30
13.30
13.20
13.30
13.10
13.10
13.20
13.10
13.20
13.20
13.10
13.10
13.10
13.20
13.10
13.10
13.20
13.20
13.30
13.30
13.20
13.50
13.10
13.10
11.50
11.25
11.50
11.50
11.00
11.00
11.00
11.50
11.50
11.00
11.25
11.25
11.25
11.25
11.25
11.25
11.75
11.25
11.25
11.50
11.50
11.50
11.75
11.50
11.25
11.00
11.00
11.00
11.50
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.00
11.50
11.00
11.00
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
FC64D
Y*9C*C16
UC48C
Y*9C*C16
UC60C
Y*9C*C20
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
Y*9C*C20
YCJD42S41S2(H)(E)
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*C20
FC64D
Y*9C*C20
UC48C
Y*9C*C20
UC60C
Y*9C*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
Y*9C*D20
Y*9C*D20
Y*9C*D20
Y*9C*D20
UC48D
Y*9C*D20
UC60D
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C16
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
YCJD48S41S1(H)(E)
T*9X*C16
T*9X*C16
UC60C
T*9X*C20
FC/MC/PC48C
FC/PC60C
T*9X*C20
T*9X*C20
UC60C
T*9X*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
T*9X*D20
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C16
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
Y*9C*C16
For notes see Page 15.
14
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
FURNACE
COOLING
NET MBH
UNIT
MODEL
COIL
RATED
CFM
MODEL1
MODEL
WIDTH
SEER
EER
TOTAL
SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES2
Y*9C*C20
Y*9C*C20
21.0
21.0
24.5
24.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
24.5
21.0
21.0
21.0
21.0
21.0
24.5
24.5
24.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
24.5
24.5
24.5
24.5
FC/MC/PC48C
FC/PC60C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
1655
1655
1645
1615
1615
1605
1615
1605
1605
1640
1690
1665
1665
1735
1735
1655
1655
1655
1615
1630
1615
1645
1560
1595
1645
1645
1630
1645
1630
1615
1605
1615
1605
1655
1655
1655
1655
1615
1630
1630
1615
48.0
48.0
48.0
48.0
56.5
55.5
57.0
54.0
56.5
56.0
57.0
57.0
57.0
56.5
56.5
56.0
55.0
53.5
55.5
56.0
53.5
56.5
56.0
57.0
56.0
56.0
56.5
57.0
56.0
56.5
55.5
57.0
54.0
56.0
55.0
57.0
53.5
55.5
56.0
57.0
53.5
34.8
35.2
35.2
35.0
37.4
37.0
37.8
35.2
37.8
37.2
37.8
37.8
37.8
38.5
38.5
37.2
36.8
35.0
36.8
37.4
35.0
37.8
37.2
37.8
37.2
37.2
37.8
37.8
37.2
37.4
37.0
37.8
35.2
37.2
36.8
37.8
35.0
36.8
37.4
37.8
35.0
13.20
13.10
13.20
13.20
13.50
13.50
14.00
13.00
13.50
13.00
13.50
13.50
14.25
13.00
13.00
13.20
13.30
13.00
13.30
13.30
13.00
13.30
13.00
14.25
13.00
13.00
13.30
14.25
13.00
13.50
13.50
14.00
13.00
13.20
13.30
13.50
13.00
13.30
13.30
13.50
13.00
11.00
11.00
11.00
11.00
11.00
11.00
11.75
11.00
11.00
11.00
11.00
11.00
12.00
11.00
11.00
11.00
11.00
10.80
11.00
11.00
10.90
11.00
11.00
12.00
11.00
11.00
11.00
12.00
11.00
11.00
11.00
11.75
11.00
11.00
11.00
11.25
10.80
11.00
11.00
11.25
10.90
YCJD48S41S1(H)(E)
Y*9C*D20
Y*9C*D20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C20
UC60C
FC/PC60C
UC60C
FC/MC/PC60D
FC/MC62D
FC64D
UC60C
UC60D
FC/MC62D
FC/PC60C
UC60C
FC/MC/PC60D
FC/MC62D
UC60D
FC/MC/PC60D
FC/PC60C
FC64D
YCJD60S41S1(E)
T*9X*C20
T*9X*C20
T*9X*C20
UC60C
T*9X*C20
UC60D
T*9X*D20
FC/MC/PC60D
FC64D
T*9X*D20
T*9X*D20
UC60D
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C20
FC/MC62D
FC/PC60C
FC64D
UC60C
FC/MC62D
FC/PC60C
FC64D
Y*9C*C20
Y*9C*C20
Y*9C*C20
UC60C
Y*9C*D20
FC/MC/PC60D
FC/MC62D
FC64D
Y*9C*D20
Y*9C*D20
Y*9C*D20
UC60D
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
Johnson Controls Unitary Products
15
840569-YTG-A-0612
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
ACCESSORIES
Refer to Price Manual for specific model numbers.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
Start Assist Kit (S1-2SA067*) - Provides increased starting
torque for areas with low voltage. See Hard Start Kit Accessory
Installation Manual for Hard Start Kit part number for each
model.
SOUND POWER RATINGS
UNIT MODEL
(dBA)
69
18
24
30
36
42
48
60
72
TXV Kits - S1-1TVM series thermal expansion valves precisely
meter refrigerant for optimum performance over a wide range of
conditions. See System Charge table for TXV part number for
each model.
71
71
75
74
74
Rated in accordance with ARI Standard 270-1995.
TYPICAL INSTALLATION
MINIMUM 18” SERVICE
ACCESS CLEARANCE
ON ONE SIDE
60” OVERHEAD
CLEARANCE
THERMOSTAT
WEATHERPROOF
DISCONNECT
SWITCH
NEC CLASS 1 WIRING
NEC CLASS 2 WIRING
10” CLEARANCE
AROUND PERIMETER
TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK
TO INDOOR COIL
NOTES:
ALL OUTDOOR WIRING MUST BE WEATHERPROOF.
MINIMUM 24” UNIT TO UNIT CLEARANCE.
CONTROL
ACCESS
PANEL
SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT
TYPICAL FIELD WIRING
ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES
POWER WIRING
CONTROL WIRING
FACTORY WIRING
POWER WIRING
208/230-1-60
24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2)
FURNACE OR AIR HANDLER TERMINAL BLOCK
Y R G W
C
*
TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.
CONTACTOR
TERMINALS
GND.
LUG
*
COIL
R
Y
G
W
ROOM THERMOSTAT
CONDENSING UNIT
ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.
16
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD18S41S1(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC18
IDCFM
450
75
600
75
750
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
75
62
80
67
80
72
62
62
16.3 18.4 18.3 20.1 20.7 17.5 19.0 18.7 20.2 20.9 18.7 19.6 19.1 20.3 21.1
16.3 14.5 12.7 12.6 9.7 17.5 17.1 14.2 13.6 10.3 18.7 17.2 15.7 14.6 10.9
1.16 1.16 1.16 1.15 1.14 1.21 1.21 1.21 1.20 1.20 1.26 1.26 1.27 1.26 1.25
15.6 17.4 17.3 19.0 19.9 16.8 18.1 17.7 19.3 20.1 18.1 18.8 18.2 19.5 20.3
15.6 14.3 12.2 12.2 9.3 16.8 16.3 13.8 13.4 10.1 18.1 18.4 15.4 14.6 10.8
1.28 1.28 1.28 1.28 1.27 1.34 1.34 1.34 1.33 1.33 1.39 1.39 1.39 1.39 1.39
14.8 16.4 16.2 18.0 19.2 16.1 17.2 16.7 18.4 19.3 17.4 18.0 17.3 18.8 19.5
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
14.8 14.0 11.8 11.7
9.0 16.1 15.6 13.5 13.2 9.8 17.4 17.2 15.1 14.6 10.6
1.40 1.41 1.40 1.41 1.41 1.46 1.46 1.46 1.46 1.47 1.52 1.52 1.52 1.52 1.52
14.0 15.4 15.1 17.0 18.4 15.4 16.3 15.8 17.5 18.6 16.7 17.2 16.4 18.0 18.7
T.C.
95
S.C.
KW
14.0 13.8 11.3 11.3
8.6 15.4 14.8 13.1 13.0 9.6 16.7 15.9 14.9 14.6 10.5
1.53 1.53 1.53 1.53 1.54 1.59 1.59 1.59 1.59 1.60 1.65 1.65 1.65 1.65 1.66
13.0 14.2 13.7 15.6 17.1 14.3 15.1 14.3 16.1 17.3 15.5 16.1 15.0 16.6 17.4
13.0 13.1 10.7 10.8 8.3 14.3 14.0 12.4 12.5 9.3 15.5 14.9 14.0 14.3 10.3
1.69 1.69 1.69 1.70 1.71 1.75 1.75 1.75 1.76 1.77 1.82 1.82 1.81 1.82 1.83
12.1 13.0 12.3 14.3 15.9 13.2 14.0 13.0 14.7 16.0 14.3 15.0 13.6 15.2 16.2
12.1 12.4 10.1 10.3 8.0 13.2 13.1 11.7 12.1 9.0 14.3 13.8 13.2 13.9 10.1
1.85 1.85 1.84 1.85 1.87 1.91 1.91 1.91 1.92 1.94 1.98 1.98 1.97 1.98 2.00
11.1 11.9 10.9 12.9 14.7 12.1 12.9 11.6 13.4 14.8 13.1 13.9 12.3 13.8 14.9
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
11.1 11.8
9.5
9.8
7.6 12.1 12.3 10.9 11.7
8.7 13.1 12.8 12.3 13.5 9.8
2.00 2.00 1.99 2.01 2.04 2.08 2.07 2.06 2.08 2.10 2.15 2.14 2.13 2.15 2.16
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
–
Coils
T.C.
1.00
1.00
1.02
1.00
1.02
1.03
1.03
1.00
1.02
1.00
1.02
S.C.
1.00
1.00
1.07
1.00
1.07
1.07
1.05
1.00
1.03
1.03
1.05
KW
1.00
1.00
0.92
1.00
1.02
0.94
0.94
1.00
0.93
0.88
0.90
Furnaces
Coils
T.C.
1.00
1.00
1.00
1.00
1.01
1.01
1.03
1.03
1.03
1.00
1.00
1.01
1.03
1.03
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
0.98
0.98
0.98
0.97
1.00
1.04
1.04
1.04
1.03
0.99
0.98
1.00
1.04
1.04
0.98
0.98
0.98
0.97
0.99
0.98
KW
0.88
0.92
0.92
0.92
0.89
0.93
0.91
0.94
0.91
0.88
0.88
0.93
0.91
0.94
0.88
0.92
0.92
0.92
0.88
0.88
FC/MC/PC18
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*9V*A10
FC/MC/PC18A
UC18A
–
UC18
AHE18B
AHP18
AHR18B
AHX18
AV*24
–
FC/MC/PC18B
UC18B
–
–
FC/MC/PC18A
UC18A
–
–
FC/MC/PC18B
UC18B
F4FP024
F6FP018
MV12B
MX12B
–
–
FC/MC/PC18A
FC/MC/PC18B
UC18B
FC/MC18B
FC/MC18B
T*9(C,V)*B12
T*9(C,V)*B12
T*9X*A10
FC/MC/PC18A
FC/MC/PC18B
UC18B
T*9X*B12
T*9X*B12
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*9C*B12
FC/MC/PC18A
UC18A
FC/MC/PC18B
UC18B
FC/MC/PC18B
UC18B
Y*9C*B12
Johnson Controls Unitary Products
17
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD24S41S1(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC36
IDCFM
600
75
800
75
1000
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
20.5 25.5 25.4 27.0 28.2 22.6 26.7 26.5 28.3 29.5 24.7 28.0 27.7 29.6 30.8
20.5 19.1 16.6 16.3 13.3 22.6 22.0 18.8 18.0 14.2 24.7 24.9 21.0 19.7 15.1
1.66 1.67 1.67 1.67 1.67 1.73 1.74 1.74 1.74 1.74 1.81 1.81 1.82 1.82 1.82
19.1 23.5 23.4 25.5 27.2 21.4 25.0 24.7 26.9 28.6 23.7 26.4 26.0 28.2 29.9
19.1 18.5 15.7 15.8 12.8 21.4 21.1 18.0 17.6 13.8 23.7 23.8 20.4 19.4 14.9
1.79 1.80 1.80 1.81 1.82 1.87 1.87 1.88 1.89 1.90 1.95 1.95 1.95 1.97 1.98
17.7 21.6 21.3 24.0 26.3 20.2 23.2 22.8 25.4 27.6 22.7 24.8 24.3 26.9 28.9
17.7 17.9 14.9 15.3 12.3 20.2 20.3 17.3 17.2 13.5 22.7 22.7 19.7 19.1 14.6
1.92 1.92 1.92 1.95 1.98 2.01 2.01 2.01 2.04 2.06 2.09 2.10 2.09 2.12 2.14
16.3 19.6 19.3 22.5 25.3 19.0 21.5 21.0 24.0 26.7 21.7 23.3 22.6 25.5 28.0
16.3 17.3 14.1 14.7 11.9 19.0 19.5 16.5 16.8 13.1 21.6 21.6 19.0 18.9 14.4
2.05 2.05 2.05 2.09 2.14 2.14 2.15 2.14 2.18 2.22 2.24 2.24 2.23 2.27 2.30
15.0 17.7 17.1 20.1 23.1 17.4 19.5 18.8 21.6 24.4 19.8 21.3 20.4 23.1 25.8
15.0 15.9 13.1 13.8 11.1 17.4 17.8 15.3 15.9 12.5 19.8 19.8 17.4 18.0 13.9
2.17 2.17 2.16 2.22 2.28 2.28 2.28 2.26 2.31 2.37 2.38 2.39 2.36 2.41 2.45
13.8 15.8 15.0 17.9 20.9 15.9 17.6 16.6 19.3 22.2 18.0 19.4 18.3 20.7 23.6
13.8 14.6 12.1 12.9 10.4 15.9 16.3 14.0 15.0 11.8 17.9 17.9 15.8 17.1 13.3
2.29 2.29 2.27 2.34 2.41 2.41 2.41 2.38 2.44 2.51 2.53 2.53 2.49 2.54 2.60
12.5 13.9 12.8 15.7 18.7 14.4 15.7 14.5 17.0 20.1 16.2 17.5 16.2 18.4 21.4
12.5 13.4 11.2 12.0 9.6 14.4 14.7 12.7 14.1 11.2 16.1 16.1 14.3 16.2 12.8
2.41 2.41 2.38 2.46 2.55 2.54 2.54 2.50 2.56 2.65 2.67 2.67 2.61 2.67 2.75
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
AHX36
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.03
1.01
1.03
S.C.
1.01
1.04
1.00
1.01
1.02
1.04
1.04
1.04
1.04
1.01
1.02
KW
0.92
0.92
1.00
0.93
0.92
0.92
0.92
0.92
0.91
0.91
0.90
Air Handlers
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.02
1.02
1.05
1.00
0.99
1.00
S.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.04
1.04
1.11
1.01
0.99
1.01
KW
1.00
1.00
1.00
1.00
1.00
1.00
0.93
0.93
0.92
1.00
0.99
0.92
–
–
FC/MC/PC32
AV*36
–
–
FC/MC/PC35
F4FP036
F6FP030
F6FP036
MV12B
–
–
FC/MC/PC36
–
–
FC/MC/PC37
–
–
FC/MC/PC43
FC/MC35B
FC/MC36B
FC/MC43B
FC/MC35B
FC/MC36B
FC/MC43B
–
UC36
MV12B
AHE24B
AHE30B
AHE36C
AHP30
AHR24B
AHX30
–
–
–
–
–
–
MV12B
MX12B
MX12B
MX12B
Continued on next page.
18
Johnson Controls Unitary Products
840569-YTG-A-0612
Furnaces
Coils
T.C.
1.00
1.01
1.02
1.00
0.99
1.00
1.00
1.00
1.00
1.00
1.00
0.98
1.00
1.00
1.00
0.98
1.00
1.00
1.00
0.98
S.C.
1.01
1.01
1.02
1.01
0.98
1.01
1.02
1.01
1.02
1.01
1.02
0.99
1.01
1.02
1.01
1.00
1.02
1.01
1.02
1.00
KW
0.94
0.94
0.95
0.92
0.91
0.92
0.92
0.92
0.96
0.92
0.92
0.94
0.92
0.92
0.92
0.94
0.92
0.92
0.92
0.94
Furnaces
Coils
T.C.
1.00
1.00
1.00
0.98
1.00
1.00
1.00
0.98
1.00
1.00
1.00
1.00
1.00
1.00
1.01
1.00
1.03
1.00
1.00
1.00
0.98
S.C.
1.02
1.01
1.02
0.99
1.01
1.02
1.01
1.00
1.01
1.01
1.02
1.02
1.01
1.02
1.01
1.01
1.03
1.02
1.01
1.02
1.00
KW
0.96
0.92
0.92
0.94
0.92
0.92
0.92
0.94
0.96
0.92
0.92
0.92
0.92
0.92
0.96
0.96
0.96
0.92
0.92
0.92
0.94
T*9X*A10
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC36B
FC/MC/PC35C
FC/MC/PC36C
FC/MC/PC35C
FC/MC/PC36C
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
UC36A
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*(8,L)X*B12
T*9V*A10
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
UC36A
T*9X*A10
T*9X*A10
T*9X*B12
T*9X*C16
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
T*9X*C16
T*9X*C20
T*9X*C20
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*9C*B12
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
FC/MC/PC32A
FC/MC/PC36A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
T*9V*A10
FC/MC/PC35B
FC/MC/PC36B
FC/MC/PC43B
UC36B
T*9V*A10
Y*9C*B12
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*B12
Y*9C*B12
Y*9C*B12
Johnson Controls Unitary Products
19
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD30S41S1(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC32
IDCFM
800
75
1000
75
1200
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
30.2 33.4 32.8 35.2 36.5 31.7 33.9 33.4 35.5 36.7 33.2 34.3 34.1 35.9 36.9
28.9 26.3 22.1 21.6 16.3 30.3 29.5 24.0 23.0 17.4 31.8 32.6 25.9 24.4 18.5
2.18 2.20 2.20 2.21 2.23 2.27 2.28 2.29 2.42 2.32 2.37 2.36 2.38 2.63 2.41
28.0 30.7 30.0 32.9 34.7 29.7 31.5 30.7 33.3 34.8 31.3 32.4 31.5 33.8 35.0
26.9 25.2 20.9 20.7 15.6 28.4 27.6 23.0 22.4 16.7 30.0 30.1 25.1 24.1 17.8
2.36 2.37 2.37 2.40 2.43 2.46 2.47 2.47 2.49 2.53 2.56 2.56 2.56 2.58 2.62
25.9 28.0 27.2 30.6 32.8 27.7 29.2 28.0 31.2 33.0 29.5 30.5 28.8 31.7 33.1
24.8 24.0 19.8 19.8 15.0 26.5 25.8 22.0 21.8 16.1 28.2 27.5 24.3 23.8 17.1
2.54 2.54 2.54 2.59 2.64 2.65 2.65 2.64 2.56 2.73 2.76 2.75 2.74 2.54 2.83
23.8 25.3 24.5 28.3 31.0 25.7 26.9 25.3 29.0 31.1 27.6 28.6 26.2 29.7 31.3
22.8 22.9 18.6 18.9 14.4 24.6 23.9 21.0 21.2 15.4 26.5 25.0 23.5 23.5 16.5
2.72 2.72 2.71 2.78 2.84 2.84 2.83 2.81 2.64 2.94 2.95 2.94 2.92 2.49 3.04
21.8 23.1 21.7 25.2 27.9 23.4 24.6 22.6 25.8 28.0 25.0 26.1 23.5 26.4 28.1
20.9 21.1 17.4 17.7 13.4 22.4 22.2 19.3 19.3 14.5 24.0 23.3 21.3 20.8 15.7
2.91 3.02 2.88 2.96 3.04 3.03 3.08 2.99 2.90 3.14 3.15 3.14 3.10 2.84 3.24
19.8 21.1 19.1 22.2 25.0 21.2 22.4 19.9 22.7 25.0 22.6 23.6 20.8 23.2 25.0
19.0 19.3 16.2 16.7 12.5 20.3 20.5 17.7 17.4 13.7 21.6 21.6 19.2 18.2 14.9
3.10 3.31 3.05 3.14 3.23 3.22 3.33 3.17 3.16 3.33 3.34 3.34 3.29 3.18 3.43
17.8 19.0 16.4 19.2 22.0 19.0 20.1 17.3 19.6 22.0 20.1 21.2 18.2 20.0 22.0
17.1 17.5 15.1 15.6 11.6 18.2 18.7 16.1 15.6 12.9 19.2 20.0 17.1 15.6 14.2
3.28 3.61 3.22 3.31 3.42 3.41 3.57 3.34 3.42 3.52 3.53 3.54 3.47 3.53 3.63
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
F4FP040
F6FP030
F6FP036
MV12B
Coils
T.C.
1.00
1.01
1.01
1.00
1.00
1.03
1.03
1.03
1.05
1.03
1.04
S.C.
1.00
1.03
1.02
1.03
1.03
1.03
1.03
1.08
1.10
1.06
1.04
KW
1.00
0.97
0.93
0.92
0.92
0.95
0.95
0.95
0.94
0.91
0.92
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.01
1.04
1.00
1.00
1.01
1.03
1.01
1.03
1.03
S.C.
1.00
1.00
1.00
1.00
1.02
1.05
1.00
1.00
1.06
1.05
1.06
1.06
1.04
KW
1.00
1.00
1.00
1.00
0.95
0.94
1.00
1.00
1.01
1.03
0.95
0.95
0.95
–
FC/MC/PC32
–
–
FC/MC/PC35
–
–
FC/MC/PC37
FC/MC35B
FC/MC43B
FC/MC35C
FC/MC43C
FC/MC35B
FC/MC43B
FC/MC35C
FC/MC43C
–
FC/MC/PC43
MV12B
AHE30B
AHE36C
AHP30
AHP36
AHR30B
AHR36B
AHX30
AHX36
AV*36
–
–
–
–
–
–
–
–
–
MV16C
MV16C
MX12B
MX12B
MX16C
MX16C
Continued on next page.
20
Johnson Controls Unitary Products
840569-YTG-A-0612
Furnaces
Coils
T.C.
1.03
1.03
1.03
1.03
1.03
0.97
1.01
1.03
1.02
1.03
1.02
1.03
1.03
1.03
1.01
1.03
1.02
1.03
1.02
1.03
S.C.
1.05
1.09
1.09
1.07
1.09
0.92
1.04
1.04
1.02
1.05
1.05
1.05
1.07
1.05
1.05
1.05
1.05
1.05
1.05
1.05
KW
0.95
0.94
0.99
0.94
0.95
0.89
1.01
0.98
0.98
0.95
0.94
0.95
0.95
0.95
0.97
0.99
0.94
0.95
0.94
0.95
Furnaces
Coils
T.C.
1.01
1.03
1.02
1.03
1.02
1.03
1.03
1.03
1.01
1.03
1.03
1.03
1.03
0.97
0.99
1.02
1.01
1.03
1.02
1.03
1.02
S.C.
1.04
1.04
1.02
1.05
1.05
1.05
1.07
1.05
1.02
1.09
1.09
1.09
1.09
0.92
0.98
1.01
1.05
1.05
1.05
1.05
1.05
KW
1.01
0.98
0.98
0.95
0.94
0.95
0.95
0.95
1.01
0.99
0.99
0.95
0.95
0.89
0.91
0.94
0.97
0.99
0.94
0.95
0.94
T*9(C,V)*C20
T*9X*B12
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
T*(8,L)V*A12
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*A12
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*B12
T*9(C,V)*B12
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC32A
FC/MC/PC37A
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35B
FC/MC/PC43B
FC/MC/PC35C
FC/MC/PC43C
FC/MC/PC35C
T*9X*B12
T*9X*C16
T*9X*C16
T*9X*C20
Y*(8,L)C*A12
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*B12
Y*9C*B12
Y*9C*C16
Y*9C*C16
Y*9C*C20
Y*9C*C20
Johnson Controls Unitary Products
21
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD36S41S1(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC37
IDCFM
1000
75
1200
75
1400
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
35.3 37.4 37.0 39.3 40.4 36.3 38.1 37.4 39.7 40.2 37.3 38.8 37.8 40.1 40.1
33.1 29.8 25.3 24.2 18.1 34.1 31.8 26.8 25.2 18.5 35.2 33.8 28.3 26.1 18.9
2.40 2.42 2.41 2.44 2.44 2.49 2.50 2.50 2.53 2.53 2.58 2.58 2.60 2.61 2.63
33.8 35.6 35.1 37.7 39.3 34.9 36.4 35.6 38.1 39.3 36.1 37.2 36.1 38.5 39.3
31.7 29.4 24.8 23.9 17.9 32.9 31.4 26.5 25.1 18.5 34.1 33.3 28.2 26.3 19.1
2.61 2.63 2.62 2.66 2.67 2.71 2.72 2.71 2.75 2.77 2.80 2.80 2.80 2.83 2.86
32.4 33.8 33.3 36.2 38.1 33.6 34.7 33.8 36.6 38.3 34.8 35.6 34.4 37.0 38.4
30.4 29.0 24.3 23.5 17.7 31.7 30.9 26.1 25.0 18.5 33.0 32.8 28.0 26.5 19.3
2.82 2.84 2.84 2.88 2.91 2.92 2.93 2.92 2.96 3.00 3.02 3.03 3.01 3.05 3.09
31.0 32.0 31.5 34.6 37.0 32.3 33.0 32.1 35.0 37.3 33.6 34.0 32.7 35.4 37.6
29.0 28.6 23.7 23.1 17.5 30.5 30.5 25.8 24.9 18.5 31.9 32.3 27.9 26.6 19.5
3.04 3.05 3.05 3.09 3.14 3.14 3.15 3.13 3.18 3.23 3.24 3.25 3.22 3.27 3.32
28.0 28.9 27.8 31.1 34.3 28.9 29.9 28.5 31.6 34.6 29.9 30.9 29.2 32.0 34.9
26.3 26.2 22.0 21.9 16.6 27.4 27.8 23.8 23.8 17.7 28.5 29.4 25.6 25.7 18.9
3.25 3.25 3.23 3.30 3.37 3.36 3.36 3.33 3.39 3.47 3.47 3.47 3.43 3.49 3.56
25.0 25.9 24.3 27.8 31.7 25.7 26.9 25.1 28.2 32.0 26.4 27.9 25.9 28.7 32.3
23.7 23.9 20.3 20.8 15.8 24.4 25.2 21.8 22.8 17.0 25.2 26.6 23.4 24.7 18.3
3.45 3.46 3.42 3.50 3.60 3.57 3.57 3.52 3.60 3.70 3.68 3.69 3.63 3.70 3.79
22.1 22.9 20.7 24.4 29.0 22.5 23.9 21.7 24.9 29.3 22.9 24.9 22.6 25.4 29.6
21.1 21.5 18.6 19.7 15.0 21.5 22.7 19.9 21.7 16.3 21.9 23.8 21.1 23.8 17.7
3.65 3.66 3.60 3.70 3.83 3.78 3.78 3.71 3.80 3.93 3.90 3.91 3.83 3.91 4.03
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Air Handlers
F5FP048
F6FP042
MV12B
Coils
T.C.
1.00
1.02
1.01
1.00
1.03
1.03
1.03
1.01
1.03
1.01
1.03
S.C.
1.00
1.04
1.02
1.02
1.02
1.02
1.03
1.02
1.03
1.01
1.03
KW
1.00
0.98
0.95
0.92
0.94
0.94
0.94
0.95
0.92
0.91
0.91
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.02
1.02
1.00
1.00
0.99
1.02
1.01
1.01
1.00
S.C.
1.00
1.00
1.00
1.00
1.02
1.04
1.00
1.00
0.99
1.02
1.01
1.02
1.02
KW
1.00
1.00
1.00
1.00
0.93
0.92
1.00
1.00
0.99
0.99
0.96
0.94
0.92
–
FC/MC/PC37
–
–
FC/MC/PC43
FC/MC43B
FC/MC48D
FC/MC43C
FC/MC48C
FC/MC48D
FC/MC43B
FC/MC48D
FC/MC43C
FC/MC48C
–
FC/MC/PC48
MV12D
–
UC48
MV16C
AHE36C
AHE42D
AHP36
AHP42
AHR36B
AHR42C
AHX36
AHX42
AV*36
–
–
–
–
–
–
–
–
–
MV16C
MV20D
MX12B
MX12D
MX16C
MX16C
Continued on next page.
22
Johnson Controls Unitary Products
840569-YTG-A-0612
Furnaces
Coils
T.C.
1.01
1.02
0.99
1.00
1.01
0.97
1.01
0.97
0.97
1.01
1.02
1.03
0.99
1.02
1.03
0.99
1.01
1.01
1.03
0.99
1.02
1.03
1.00
1.03
0.99
S.C.
1.02
1.04
1.00
0.99
1.01
0.99
1.01
0.99
0.93
1.02
1.02
1.05
1.00
1.02
1.05
1.00
1.02
1.02
1.05
1.00
1.02
1.07
1.03
1.06
1.01
KW
0.98
0.98
0.97
0.96
0.97
0.95
0.97
0.95
0.97
1.01
0.97
0.94
0.95
0.93
0.94
0.95
1.01
0.97
0.98
0.95
0.97
0.98
1.00
0.94
0.95
Furnaces
Coils
T.C.
0.97
1.01
1.02
1.03
0.99
1.02
1.03
0.99
1.01
1.01
1.01
1.02
0.98
1.02
1.02
0.99
1.01
1.01
1.03
0.99
1.02
1.03
1.00
1.03
0.99
1.01
S.C.
0.93
1.02
1.02
1.05
1.00
1.02
1.05
1.00
1.02
1.02
1.00
1.02
1.00
1.03
1.04
1.02
1.02
1.02
1.05
1.00
1.02
1.07
1.03
1.06
1.01
1.02
KW
0.97
1.01
0.97
0.94
0.95
0.93
0.94
0.95
0.98
0.98
0.96
0.97
0.93
0.96
0.98
0.95
1.01
0.97
0.98
0.95
0.97
0.98
1.00
0.94
0.95
0.98
T*9X*C16
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*(8,L)V*A12
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*A12
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*B12
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*B12
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*9X*C16
T*9X*C16
T*9X*C20
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*9X*C20
T*9X*C20
FC/MC/PC43C
FC/MC/PC48C
UC48C
T*9X*D20
FC/MC/PC48D
UC48D
T*9X*D20
Y*(8,L)C*A12
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*B12
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC37A
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
UC48C
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C20
Y*9C*C20
Y*9C*C20
Y*9C*D20
Y*9C*D20
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC43C
FC/MC/PC48C
UC48C
FC/MC/PC48D
UC48D
FC/MC/PC48D
UC48D
FC/MC/PC43B
Johnson Controls Unitary Products
23
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD42S41S2(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC43
IDCFM
1200
75
1400
75
1600
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
41.8 43.9 43.7 47.2 49.9 43.3 45.0 44.7 47.9 50.9 44.7 46.0 45.7 48.5 51.9
41.6 36.4 30.9 29.8 23.8 43.0 38.5 32.5 31.0 24.2 44.3 40.7 34.0 32.2 24.5
2.79 2.81 2.82 2.82 2.85 2.80 2.82 2.82 2.83 2.85 2.80 2.83 2.82 2.84 2.86
39.8 41.2 41.3 45.1 48.2 41.4 42.3 42.2 45.7 49.0 42.9 43.3 43.2 46.4 49.8
39.5 35.2 29.8 29.1 23.1 41.0 37.4 31.6 30.6 23.8 42.5 39.7 33.5 32.1 24.5
3.08 3.10 3.10 3.13 3.17 3.10 3.11 3.11 3.14 3.18 3.12 3.13 3.12 3.15 3.19
37.8 38.6 38.8 43.0 46.5 39.4 39.6 39.7 43.6 47.1 41.0 40.6 40.7 44.3 47.7
37.5 34.1 28.7 28.4 22.4 39.1 36.4 30.8 30.2 23.4 40.7 38.7 32.9 32.0 24.5
3.38 3.39 3.39 3.44 3.50 3.41 3.41 3.41 3.46 3.51 3.43 3.42 3.42 3.47 3.52
35.8 35.9 36.3 40.9 44.8 37.5 36.9 37.3 41.5 45.2 39.2 37.9 38.2 42.1 45.6
35.4 33.0 27.6 27.7 21.7 37.1 35.3 30.0 29.8 23.0 38.8 37.6 32.3 31.9 24.4
3.67 3.68 3.68 3.76 3.82 3.71 3.70 3.70 3.77 3.83 3.75 3.72 3.72 3.79 3.84
33.1 33.1 32.6 37.0 41.6 34.7 34.2 33.5 37.6 42.0 36.3 35.4 34.4 38.2 42.4
32.7 31.0 26.3 26.4 20.7 34.3 33.1 28.4 28.6 22.1 35.9 35.2 30.5 30.8 23.5
3.98 3.98 3.96 4.05 4.14 4.02 4.01 3.98 4.07 4.16 4.06 4.05 4.01 4.09 4.18
30.5 30.2 28.9 33.3 38.4 32.0 31.6 29.8 33.8 38.8 33.4 33.0 30.8 34.4 39.3
30.2 29.1 25.0 25.1 19.8 31.6 30.9 26.8 27.4 21.3 33.1 32.7 28.7 29.6 22.7
4.27 4.27 4.22 4.33 4.45 4.32 4.31 4.26 4.36 4.48 4.37 4.36 4.29 4.39 4.51
27.9 27.4 25.2 29.5 35.2 29.2 29.0 26.2 30.0 35.7 30.6 30.5 27.1 30.5 36.2
27.6 27.3 23.7 23.8 18.9 28.9 28.8 25.3 26.2 20.4 30.3 30.3 26.9 28.5 21.8
4.57 4.56 4.49 4.62 4.77 4.62 4.62 4.53 4.65 4.80 4.67 4.67 4.57 4.68 4.84
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
MV20D
MV20D
MV20D
MX16C
MX16C
MX16C
MX20D
MX20D
MX20D
MX20D
FC/MC60D
FC/MC62D
FC64D
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.03
1.03
1.01
1.01
1.01
1.01
1.03
1.06
1.06
0.95
0.93
0.91
0.93
0.93
0.93
0.93
0.93
0.91
0.89
Air Handlers
–
Coils
T.C.
1.00
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
0.99
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
S.C.
1.00
1.01
0.99
1.02
1.03
1.01
1.03
1.02
1.04
1.03
1.01
1.01
1.03
0.97
1.01
1.02
1.03
1.05
1.02
1.02
1.04
1.01
1.05
1.01
1.02
1.01
1.04
KW
1.00
1.01
1.00
1.01
0.99
1.01
0.93
0.93
0.93
1.01
0.99
0.95
1.01
0.99
1.01
0.93
0.93
0.93
0.93
0.93
0.95
0.95
0.95
0.93
0.95
0.97
0.93
FC/MC/PC43
–
FC/MC/PC48
FC/MC43C
FC/MC48C
FC60C
–
FC/MC/PC60
–
FC/MC62
–
FC64
FC/MC48D
FC/MC60D
FC/MC62D
FC64D
–
UC48
AHE42D
AHE48D
AHE60D
AHP42
AHP48
AHP60
AHR42C
AHR48D
AHR60D
AHX42
AHX48
AHX60
AV*48
AV*60
F6FP042
F6FP048
F6FP060
MV16C
MV16C
MV16C
MV20D
–
–
–
–
Furnaces
Coils
T.C.
0.99
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
S.C.
0.97
1.01
1.00
1.00
1.01
1.03
1.01
1.03
1.01
1.01
1.03
1.01
1.01
1.01
1.03
KW
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.93
0.97
0.97
0.99
0.97
0.97
0.95
0.95
–
T*(8,L)V*B12
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
FC/MC/PC43B
–
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
–
–
–
–
–
FC/PC60C
–
FC64D
–
UC48C
–
UC60C
–
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
–
–
FC/MC43C
FC/MC48C
FC60C
FC/MC48D
Continued on next page.
24
Johnson Controls Unitary Products
840569-YTG-A-0612
Furnaces
Coils
T.C.
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.00
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.00
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
S.C.
1.01
1.03
1.01
1.01
0.99
1.04
1.01
1.01
1.01
1.03
1.01
1.04
1.01
1.01
1.02
1.04
1.04
1.04
1.06
1.04
1.07
1.04
1.04
1.01
1.02
1.02
1.00
1.03
1.00
1.03
1.01
0.99
1.01
1.02
1.02
1.00
1.03
1.00
1.03
1.01
1.00
1.01
1.01
1.03
1.03
1.01
1.00
0.97
1.01
1.02
1.02
1.01
1.03
1.01
1.03
1.02
1.01
1.02
KW
0.95
0.93
0.95
0.97
0.96
0.95
0.93
0.93
0.93
0.93
0.93
0.91
0.93
0.93
0.95
0.93
0.93
0.93
0.93
0.93
0.91
0.93
0.95
0.99
0.97
0.97
1.00
1.01
1.00
0.97
0.97
1.00
0.99
0.99
0.99
0.99
0.99
0.99
0.95
0.99
0.98
0.97
0.97
0.97
0.95
0.97
0.98
0.96
0.97
0.95
0.95
0.97
0.95
0.97
0.93
0.95
0.97
0.95
Furnaces
Coils
T.C.
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
0.99
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.00
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.01
1.00
1.01
1.01
1.01
1.01
1.01
1.00
S.C.
1.02
1.02
1.01
1.03
1.01
1.03
1.02
1.01
1.02
1.04
1.03
1.03
1.01
1.05
0.97
1.01
1.00
1.00
1.01
1.03
1.01
1.03
1.01
1.01
1.03
1.01
1.01
1.01
1.03
1.01
1.03
1.01
1.01
1.01
1.02
1.02
1.00
1.03
1.00
1.03
1.01
0.99
1.01
1.02
1.02
1.00
1.03
1.00
1.03
1.01
1.00
1.01
1.01
1.03
1.03
1.01
1.00
KW
0.95
0.95
0.95
0.95
0.95
0.91
0.95
0.95
0.93
0.93
0.93
0.91
0.93
0.93
0.97
0.97
0.97
0.97
0.97
0.97
0.97
0.93
0.97
0.97
0.99
0.97
0.97
0.95
0.95
0.95
0.93
0.95
0.97
0.99
0.97
0.97
1.00
1.01
1.00
0.97
0.97
1.00
0.99
0.99
0.99
0.99
0.99
0.99
0.95
0.99
0.98
0.97
0.97
0.97
0.95
0.97
0.98
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*B12
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*B12
FC/PC60C
FC64D
T*9X*C20
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
T*9X*C20
UC48C
T*9X*C20
UC60C
T*9X*C20
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
T*9X*C20
T*9X*C20
T*9X*C20
UC48C
T*9X*C20
UC60C
T*9X*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
T*9X*D20
T*9X*D20
T*9X*D20
UC48C
T*9X*D20
UC48D
UC60C
T*9X*D20
UC60D
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
Y*(8,L)C*B12
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C16
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
UC48C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC48C
UC60C
UC48C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
UC60C
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
Y*9C*C16
UC48C
Y*9C*C16
UC60C
Y*9C*C16
UC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
Y*9C*C16
UC60C
Y*9C*C20
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
Y*9C*C20
Y*9C*C20
UC48D
Y*9C*C20
UC60D
Y*9C*C20
FC/MC/PC43B
FC/MC/PC43C
FC/MC/PC48C
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC/PC60C
FC64D
Y*9C*C20
T*9X*C16
Y*9C*C20
T*9X*C16
Y*9C*C20
UC48C
T*9X*C16
Y*9C*C20
UC60C
T*9X*C16
Y*9C*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC62D
FC64D
T*9X*C16
Y*9C*D20
T*9X*C16
Y*9C*D20
T*9X*C16
Y*9C*D20
T*9X*C16
UC48C
Y*9C*D20
UC48D
T*9X*C16
UC60C
Y*9C*D20
UC60D
T*9X*C20
FC/MC/PC43C
Johnson Controls Unitary Products
25
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD48S41S1(H)(E)
INDOOR COIL MODEL NO.
FC/MC/PC48
IDCFM
1400
75
1600
75
1800
75
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
62
62
62
49.7 51.4 50.5 55.8 54.6 52.0 53.1 51.9 56.3 55.4 54.4 54.7 53.2 56.9 56.3
46.9 42.8 35.7 35.7 25.9 48.8 45.6 37.9 37.1 27.3 50.8 48.3 40.1 38.5 28.8
3.36 3.41 3.42 3.45 3.50 3.38 3.42 3.43 3.46 3.52 3.41 3.43 3.45 3.47 3.53
47.5 48.6 47.7 52.8 52.3 49.8 50.3 48.9 53.6 53.1 52.0 52.1 50.1 54.3 53.8
44.6 41.7 34.7 34.6 25.2 46.6 44.5 36.9 36.3 26.6 48.6 47.2 39.0 37.9 27.9
3.65 3.68 3.68 3.74 3.82 3.67 3.70 3.70 3.76 3.83 3.70 3.72 3.72 3.77 3.85
45.4 45.8 44.8 49.9 50.1 47.5 47.6 46.0 50.8 50.7 49.7 49.4 47.1 51.7 51.3
42.3 40.6 33.7 33.5 24.6 44.4 43.4 35.8 35.4 25.8 46.4 46.1 37.9 37.3 27.0
3.93 3.95 3.95 4.04 4.14 3.97 3.98 3.97 4.06 4.15 4.00 4.01 3.99 4.08 4.17
43.2 42.9 42.0 46.9 47.9 45.3 44.8 43.0 48.0 48.4 47.3 46.7 44.1 49.1 48.9
40.1 39.6 32.7 32.4 23.9 42.1 42.3 34.8 34.6 25.0 44.2 45.0 36.9 36.7 26.1
4.22 4.22 4.22 4.34 4.46 4.26 4.26 4.24 4.36 4.47 4.30 4.30 4.27 4.39 4.49
39.8 39.3 37.3 42.4 43.5 41.6 41.1 38.4 43.4 44.0 43.4 42.8 39.5 44.3 44.5
36.8 36.7 30.7 30.7 22.7 38.6 39.0 32.7 32.8 23.7 40.5 41.2 34.7 34.9 24.8
4.52 4.52 4.49 4.62 4.77 4.57 4.57 4.52 4.65 4.79 4.61 4.61 4.55 4.67 4.81
36.4 35.9 32.7 37.9 39.3 38.0 37.5 33.9 38.9 39.7 39.6 39.0 35.1 39.8 40.2
33.6 34.0 28.7 29.0 21.5 35.2 35.7 30.6 31.1 22.5 36.9 37.4 32.5 33.1 23.6
4.82 4.82 4.76 4.89 5.07 4.87 4.86 4.79 4.92 5.10 4.92 4.91 4.82 4.95 5.13
33.1 32.4 28.1 33.5 35.0 34.5 33.8 29.4 34.4 35.5 35.9 35.3 30.6 35.2 35.9
30.4 31.2 26.7 27.3 20.3 31.9 32.5 28.5 29.3 21.3 33.3 33.7 30.4 31.3 22.3
5.11 5.11 5.02 5.17 5.38 5.17 5.16 5.06 5.20 5.41 5.22 5.21 5.09 5.23 5.44
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Furnaces
Coils
T.C.
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.98
1.00
0.98
0.98
1.00
0.99
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
S.C.
1.00
1.01
1.00
1.01
1.01
1.02
1.01
1.02
1.02
1.02
1.01
1.01
1.01
1.00
1.01
1.01
1.01
0.98
1.02
1.02
1.02
1.02
1.01
1.02
1.01
1.02
1.02
1.02
KW
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
0.98
1.00
0.98
0.98
1.00
0.99
1.00
1.00
1.00
0.96
1.00
1.00
1.00
1.00
1.00
1.00
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
0.98
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.98
1.00
0.99
1.00
1.00
1.01
1.00
1.01
S.C.
1.00
1.00
1.00
1.00
1.01
1.00
1.02
1.01
1.03
1.02
1.02
1.01
1.00
1.00
1.01
1.02
1.01
1.02
1.02
1.03
0.99
1.01
KW
1.00
1.00
1.00
1.00
0.94
1.00
1.00
1.00
0.96
0.92
0.92
0.96
1.00
1.00
0.95
0.92
0.95
0.92
0.92
0.97
0.94
0.93
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C16
T*9(C,V)*C16
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C16
FC/MC/PC48C
FC/PC60C
FC/MC/PC48
–
FC/MC/PC60
FC/MC/PC48C
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
–
UC48
–
UC60
AHE48D
AHP48
AHP60
AHR48D
AHX48
AV*48
–
–
FC/MC/PC48C
FC/PC60C
–
–
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
–
–
AV*60
–
T*9X*C16
F4FV060
F5FP048
F5FP060
F6FP048
MV16C
MV16C
MV20D
MV20D
MX16C
MX20D
MX20D
–
T*9X*C16
UC60C
–
T*9X*C20
FC/MC/PC48C
FC/PC60C
–
T*9X*C20
–
T*9X*C20
UC60C
FC/MC48C
FC60C
FC/MC48D
FC/MC60D
FC/MC48C
FC/MC48D
FC/MC60D
T*9X*D20
FC/MC/PC48D
FC/MC/PC60D
FC/MC/PC48C
FC/PC60C
T*9X*D20
Y*(8,L)C*C16
Y*(8,L)C*C16
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C16
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
Furnaces
Coils
T.C.
1.00
1.00
1.00
1.00
S.C.
1.02
1.02
1.02
1.02
KW
1.00
1.00
1.00
0.96
Y*9C*C16
T*(8,L)V*C16
T*(8,L)V*C16
T*(8,L)V*C20
T*(8,L)V*C20
FC/MC/PC48C
FC/PC60C
FC/MC/PC48C
FC/PC60C
Y*9C*C20
FC/MC/PC48C
FC/PC60C
Y*9C*C20
Y*9C*D20
FC/MC/PC48D
FC/MC/PC60D
Y*9C*D20
26
Johnson Controls Unitary Products
840569-YTG-A-0612
COOLING PERFORMANCE DATA
AIR CONDITIONER MODEL NO.
YCJD60S41S1(E)
INDOOR COIL MODEL NO.
FC/MC/PC60
IDCFM
1600
75
1800
75
2000
CONDENSING
ENTERING AIR
TEMPERATURE
ID DB (°F)
ID WB (°F)
T.C.
80
57
80
62
80
67
80
72
80
57
80
62
80
67
80
72
80
57
80
62
75
62
80
67
80
72
62
62
55.5 61.1 59.4 62.4 64.9 57.7 62.9 60.1 63.8 66.9 59.9 64.7 60.8 65.3 68.8
54.5 49.8 40.0 39.7 28.6 56.4 52.4 42.4 41.2 30.8 58.3 54.9 44.9 42.7 32.9
3.68 3.73 3.74 3.76 3.80 3.77 3.81 3.81 3.85 3.88 3.86 3.90 3.89 3.94 3.95
54.5 58.5 56.4 60.1 63.1 56.6 60.3 57.4 61.6 65.0 58.8 62.2 58.4 63.1 66.8
52.1 48.7 39.2 38.7 28.5 53.9 51.3 41.6 40.4 30.4 55.8 53.9 44.1 42.1 32.4
4.14 4.17 4.17 4.21 4.26 4.23 4.25 4.25 4.29 4.34 4.31 4.34 4.33 4.38 4.42
53.4 55.9 53.3 57.7 61.4 55.5 57.8 54.7 59.3 63.1 57.7 59.7 56.0 60.8 64.8
49.7 47.6 38.3 37.7 28.4 51.5 50.2 40.8 39.6 30.1 53.2 52.8 43.2 41.5 31.8
4.59 4.61 4.60 4.66 4.71 4.68 4.69 4.69 4.74 4.80 4.77 4.77 4.77 4.82 4.89
52.4 53.4 50.3 55.4 59.6 54.4 55.3 51.9 57.0 61.2 56.5 57.2 53.6 58.6 62.7
47.3 46.5 37.5 36.7 28.4 49.0 49.1 40.0 38.8 29.8 50.6 51.8 42.4 40.9 31.2
5.05 5.05 5.03 5.10 5.17 5.13 5.13 5.12 5.18 5.26 5.22 5.21 5.21 5.26 5.35
49.4 50.0 46.7 51.7 55.4 51.7 52.0 48.3 53.3 57.2 54.0 53.9 50.0 54.9 58.9
44.6 44.4 36.2 35.2 26.9 46.3 46.6 38.6 37.4 28.4 48.0 48.9 41.0 39.5 29.8
5.64 5.63 5.61 5.70 5.78 5.73 5.72 5.70 5.78 5.87 5.83 5.81 5.80 5.86 5.97
46.6 46.7 43.3 48.1 51.4 49.1 48.7 44.8 49.7 53.3 51.5 50.8 46.4 51.3 55.2
42.0 42.3 34.9 33.8 25.4 43.7 44.2 37.3 36.1 27.0 45.5 46.1 39.7 38.3 28.5
6.21 6.20 6.17 6.29 6.37 6.32 6.30 6.27 6.37 6.47 6.42 6.40 6.36 6.45 6.57
43.7 43.5 39.8 44.5 47.3 46.4 45.5 41.3 46.1 49.4 49.1 47.6 42.9 47.7 51.5
39.3 40.3 33.7 32.5 24.0 41.1 41.8 36.0 34.7 25.6 43.0 43.2 38.3 37.0 27.2
6.79 6.77 6.73 6.87 6.96 6.90 6.88 6.83 6.95 7.06 7.01 6.98 6.93 7.03 7.16
65
75
S.C.
KW
T.C.
S.C.
KW
T.C.
85
S.C.
KW
T.C.
95
S.C.
KW
T.C.
105
115
125
S.C.
KW
T.C.
S.C.
KW
T.C.
S.C.
KW
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
Furnaces
Coils
T.C.
0.99
0.99
0.98
0.96
0.94
0.97
0.98
0.94
0.99
0.98
1.00
0.98
0.98
0.99
1.00
0.98
0.99
0.97
1.00
0.95
0.98
0.96
1.00
0.94
0.97
0.98
1.00
0.94
S.C.
1.00
1.00
0.97
0.96
0.91
0.96
0.97
0.91
0.98
0.97
0.98
0.97
0.97
0.98
0.98
0.97
0.97
0.96
0.98
0.91
0.97
0.96
0.98
0.91
0.96
0.97
0.98
0.91
KW
0.99
0.99
0.98
0.96
0.96
0.97
0.98
0.95
0.99
0.98
0.92
0.98
0.98
0.99
0.92
0.98
0.99
0.97
0.94
0.95
0.98
0.96
0.98
0.96
0.97
0.98
0.98
0.95
Air Handlers
–
Coils
T.C.
1.00
1.00
1.00
1.00
1.03
1.00
1.00
1.03
1.02
1.00
1.00
1.01
1.00
1.00
1.00
1.01
1.02
1.03
S.C.
1.00
1.00
1.01
1.00
1.03
1.00
1.00
1.04
1.01
1.00
1.00
1.01
1.00
1.00
1.01
1.01
1.01
1.03
KW
1.00
1.00
0.98
1.00
0.98
1.00
1.00
0.98
1.02
1.00
1.00
0.96
1.00
1.00
0.96
0.96
0.95
0.94
T*(8,L)X*C20
T*(8,L)X*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*C20
T*9(C,V)*D20
T*9(C,V)*D20
T*9(C,V)*D20
T*9X*C20
UC60C
FC/MC/PC60
UC60D
–
FC/MC62
FC/MC62D
FC/PC60C
UC60C
–
FC64
–
UC60
AHE60D
AHP60
AHR60D
AHX60
AV*60
F4FV060
F5FP060
F6FP060
MV20D
MV20D
MV20D
MX20D
MX20D
MX20D
–
FC/MC/PC60D
FC/MC62D
UC60D
–
–
–
FC/MC/PC60D
FC/PC60C
FC64D
–
T*9X*C20
–
T*9X*C20
–
T*9X*C20
UC60C
–
T*9X*C20
UC60D
FC/MC60D
FC/MC62D
FC64D
FC/MC60D
FC/MC62D
FC64D
T*9X*D20
FC/MC/PC60D
FC64D
T*9X*D20
T*9X*D20
UC60D
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*(8,L)C*C20
Y*9C*C20
FC/MC62D
FC/PC60C
FC64D
Furnaces
Coils
T.C.
0.99
0.97
1.00
0.95
0.99
0.98
1.00
1.00
1.00
S.C.
0.97
0.96
0.98
0.91
0.98
0.97
0.98
0.98
0.98
KW
0.99
0.97
0.94
0.95
0.99
0.98
1.00
1.00
0.92
UC60C
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)V*C20
T*(8,L)X*C16
T*(8,L)X*C16
T*(8,L)X*C20
T*(8,L)X*C20
T*(8,L)X*C20
FC/MC62D
FC/PC60C
FC64D
FC/MC62D
FC/PC60C
FC64D
Y*9C*C20
Y*9C*C20
UC60C
Y*9C*C20
UC60C
FC/PC60C
UC60C
Y*9C*D20
FC/MC/PC60D
FC/MC62D
FC64D
Y*9C*D20
FC/MC/PC60D
FC/MC62D
FC64D
Y*9C*D20
Y*9C*D20
UC60D
Johnson Controls Unitary Products
27
NOTES
Subject to change without notice. Published in U.S.A.
840569-YTG-A-0612
Copyright © 2012 by Johnson Controls, Inc. All rights reserved.
Supersedes: 561908-YTG-D-0611
York International Corp.
5005 York Drive
Norman, OK 73069
|