Xerox Flowport User Manual

1
2
r e tpahC  
r e tpahC  
Xerox Document Centre Setup  
Guide for FlowPort  
This document is intended for use by FlowPort System Administrators when  
configuring the following Xerox Document Centres to scan to a FlowPort server:  
Document Centre 240/255/265/460/470/480/490  
Document Centre 220/230/332/340/432/420/425/432/440  
There are two basic things you must do on the Document Centre:  
Designating a “repository” on the document centre. This is the IP address of  
the FlowPort server.  
Setting up a default scan template.  
The procedures in this guide are provided as examples only. Because of firmware  
differences, the screens you see may be different, however you may use the  
concepts presented here.  
Xerox Document Centre Setup Guide for FlowPort  
1
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
FlowPort Repository Setup  
The following settings for the Default Repository and Template Pool Setup are  
recommended.  
In your Web browser’s Address (or Location) box, enter the TCP/IP  
address of your Document Centre.  
1
Click on Properties.  
2
In the Properties column (left side of screen), click on the plus (+) sign for the  
Services folder. The properties for the Document Centre will display as shown  
3
below.  
Xerox Document Centre Setup Guide for FlowPort  
3
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
Click on the plus (+) sign for the Distribution Templates.  
4
Click the Repository Setup link.  
5
Under Repository Setup, perform the following:  
6
Repository List: Select Document Repository 0. Check with your Xerox  
Document Centre System Administrator to make sure the Repository is not in use.  
NOTE: Depending on the printer software model, there may only be 1 repository.  
Some models will have Document Repositories of 0-4 or 1-5.  
Protocols: Select TCP/IP.  
File Server IP Address: Enter the TCP/IP address of your FlowPort server.  
Contact your Network Administrator if you do not know the address. In some  
versions, you may need to enter a port number. In this case, enter 21.  
Directory Path: Enter /.  
Login Name: Enter the guest account user name (NSA is the default guest account  
user name).  
Password: Enter the FTP password twice (nsa is the default guest password).  
Note: If you have changed the NSA FTP user name or password in the  
FlowPort NSA Protocol Service configuration, enter the new user name  
and password here to enable FTP access.  
4
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
Click on Apply New Settings.  
7
A Login window may display. Enter admin for the user name followed by your  
password. If you do not know your password, contact your printer system  
administrator.  
8
Note: The user name and password are case sensitive.  
FlowPort Template Setup  
Click on the Services tab. The Job Submission page displays as shown below.  
1
Xerox Document Centre Setup Guide for FlowPort  
5
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
Click on the Distribution Templates button.  
2
6
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
Under the Services tab, click on the [+] new button.  
3
In the General settings box, enter the following:  
4
Name: Type FlowPort (or any name that would let users know that this is the  
FlowPort template. It can be up to eight characters in length).  
Description: Type Scan to FlowPort.  
Owner: Type your name or the FlowPort administrator’s name.  
Xerox Document Centre Setup Guide for FlowPort  
7
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
Review the Scan Settings. Click on Edit if you need to change the default settings.  
5
Text  
8
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
In the Distribution area, specify a Destination. Select Public Internet Folder  
from the New Destination list, and click add.  
6
Xerox Document Centre Setup Guide for FlowPort  
9
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services  
In the list of Select from Repository Servers, select repository that points to the  
FlowPort server.  
7
Type the Path to Document /  
8
9
Check the Filing Policy New Auto Generate.  
Document name is DOC.  
10  
11  
12  
Select the Output Image Format Multi-Page TIFF.  
Click on Apply New Settings. The Document Centre is ready to use FlowPort.  
Note: This setup provides users Guest access (Trusted/Shared) to  
FlowPort. If a higher authentication level is required, users should use  
their FlowPort Login sheet.  
Testing the FlowPort Template  
To check that the Document Centre is ready for FlowPort use, perform the  
following test:  
At the Document Centre, place a document in the scanner.  
1
Select the FlowPort template and select Scan.  
2
Note: If the Document Centre is properly configured, a DC confirmation  
sheet will be printed confirming that the scan to FlowPort was  
successful, otherwise an error report with some specific failure notice  
will be printed. If the scan to FlowPort was successful a FlowPort  
confirmation sheet will also print.  
10  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Configuring a Document Centre 220/230/332/340/432/420/425/  
432/440 with Centreware Internet Services  
Verify that the Scan-to-File feature is installed on the Document Centre. Print a  
Configuration sheet and check the installed options list for Scan-to-File. If the  
Scan-to-File is not listed, contact your Xerox service representative to obtain and  
install the Scan-to-File kit. You can also call 1-800-ASK-XEROX for  
information about obtaining and installing this feature.  
FlowPort Repository and Template Setup  
The Xerox Document Centre uses templates and repositories to control the  
disposition of scanned documents. Information about these templates and  
repositories is stored inside the Document Centre and is accessible through the  
Web server embedded in the device. The Document Centre provides a default  
template, a number of named template (optional), a default public repository, and  
four other configurable public repositories.  
Templates are shown as choices on the Document Centre Touch Screen. The  
default template is named “@default.xst” and it is the first template shown in the  
template list on the screen. The Xerox Document Centre uses templates and  
repositories to control the disposition of scanned documents. Information about  
these templates and repositories is stored inside the Document Centre and is  
accessible through the Web server embedded in the device. The Document  
Centre provides a default template, a number of named templates (optional), a  
default public repository, and four other configurable public repositories.  
Templates are shown as choices on the Document Centre Touch Screen. The  
default template is named “@default.xst” and it is the first template shown in the  
template list on the screen.  
Repositories are shown as choices for template setup in the Document Centre  
Web-based administration tool. Each repository has the following settings:  
Repository List  
Protocols  
File Server IP Address  
Directory Path  
Login Name  
Password  
Xerox Document Centre Setup Guide for FlowPort  
11  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
FlowPort Repository Setup  
The following settings for the FlowPort Repository setup are recommended.  
In your Web browser’s Address (or Location) box, enter the TCP/IP  
address of your Document Centre.  
1
Click on Properties.  
2
Click on [+] Services.  
3
Click on [+] Stored Templates  
4
12  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Click on Repository Setup.  
5
/
Select an unused repository from the Repository List (Default is recommneded).  
6
Verify that the protocol is TCP/IP.  
7
Type the File Server IP address (the IP address of your FlowPort server).  
8
Type the Directory Path /  
9
Type the login name NSA, and the password nsa.  
10  
Click on Apply New Settings.  
11  
In the dialog box that appears, type the admin User Name and Password of the  
Document Centre, and click OK.  
12  
Xerox Document Centre Setup Guide for FlowPort  
13  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
14  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
FlowPort Template Setup  
Next, you need to set up the scan template that you will use when scanning to  
FlowPort server. Select Device Index.  
1
Xerox Document Centre Setup Guide for FlowPort  
15  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Select Stored Templates.  
2
16  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Select [+] new.  
3
In the Template fields, enter a name for the template in the Name field. Leave the  
Description and Owner fields blank.  
4
Under Services, select File.  
5
Click apply.  
6
If you see the following dialog box, click Yes.  
7
Xerox Document Centre Setup Guide for FlowPort  
17  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Click the browser’s Refresh button. You should see the name of the new template  
in the list of Device Templates.  
8
List of  
Device  
Templates  
Click on [+] next to the name of the new template in the list of Device Templates.  
9
18  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Click Scan and verify the scan settings. Typically, the default settings are used,  
however click Edit if you want to change them.  
10  
Text  
Xerox Document Centre Setup Guide for FlowPort  
19  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Click File.  
11  
Under Stored templates, select the following: TCP/IP, Public, Default (or the  
repository designated for FlowPort), New Auto Generate, and TIFF  
12  
(Multi-Page) . Then, click Apply New Settings.  
The Document Center is now configured to scan to the FlowPort server.  
13  
20  
Xerox Document Centre Setup Guide for FlowPort  
Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services  
Testing the FlowPort Template  
To check that the Document Centre is ready for FlowPort use, perform the  
following test:  
At the Document Centre, place a document in the scanner.  
1
Select the FlowPort template and select Scan.  
2
Note: If the Document Centre is properly configured, a DC confirmation  
sheet will be printed confirming that the scan to FlowPort was  
successful, otherwise an error report with some specific failure notice  
will be printed. If the scan to FlowPort was successful a FlowPort  
confirmation sheet will also print.  
Xerox Document Centre Setup Guide for FlowPort  
21  

Olympus Camedia B 20lpc User Manual
Oregon Scientific IFresh Ws907 User Manual
Panasonic Dp 135fp User Manual
Philips 3160 User Manual
Samsung Avmhc105ea B 0 User Manual
Sanyo 09kls51 User Manual
Schumacher Sc 6500a User Manual
Toshiba Rav Sm1400at E User Manual
Trane Air Conditioner Gat2a0c48s41sa User Manual
York Sunline Deg 036 User Manual