Sterling Automobile Parts Sfc A 65 User Manual

Operating Instructions  
Safety Filters  
SFC-A 40  
SFC-A 50  
SFC-A 65  
Sterling Material Processing  
SFC-A  
Sterling Material Processing retains all rights to change the information in these  
operating instructions at any time without notice.  
We assume no liability for any errors or direct or indirect damage resulting in con-  
text with these operating instructions.  
Copying, translation or publication in any form except for personal use of pur-  
chaser requires approval from Sterling Material Processing.  
All rights reserved.  
3
Please note that our address and phone information has changed.  
Please reference this page for updated contact information.  
These manuals are obsolete and are provided only for their technical information, data and capacities.  
Portions of these manuals detailing procedures or precautions in the operation, inspection, maintenance  
and repair of the products may be inadequate, inaccurate, and/or incomplete and shouldn’t be relied  
upon. Please contact the ACS Group for more current information about these manuals and their  
warnings and precautions.  
Parts and Service Department  
The ACS Customer Service Group will provide your company with genuine OEM quality parts manufactured to engineering  
design specifications, which will maximize your equipment’s performance and efficiency. To assist in expediting your phone  
or fax order, please have the model and serial number of your unit when you contact us. A customer replacement parts list  
is included in this manual for your convenience. ACS welcomes inquiries on all your parts needs and is dedicated to  
providing excellent customer service.  
For immediate assistance, please contact:  
North, Central and South America, 8am – 5pm CST +1 (800) 483-3919 for drying, conveying, heating and cooling  
and automation. For size reduction: +1 (800) 229-2919.  
North America, emergencies after 5pm CST (847) 439-5855  
North America email: [email protected]  
Mexico, Central & South America  
Europe, Middle East & Africa +48 22 390 9720  
India +91 21 35329112  
Asia/Australia +86 512 8717 1919  
Sales and Contracting Department  
Our products are sold by a worldwide network of independent sales representatives. Contact our Sales Department for the  
name of the sales representative nearest you.  
Let us install your system. The Contract Department offers any or all of these services: project planning; system packages  
including drawings; equipment, labor, and construction materials; and union or non-union installations.  
For assistance with your sales or system contracting needs please Call:  
(
)
North, Central and South America +1 262 641-8600 or +1 (847) 273-7700 Monday–Friday, 8am–5pm CST  
Europe/Middle East/Africa +48 22 390 9720  
India +91 21 35329112  
Asia/Australia +86 512 8717 1919  
Facilities:  
ACS offers facilities around the world to service you no matter where you are located. For more information, please visit us at  
Asia/Australia:  
India  
United States:  
ACS India  
ACS Suzhou  
Gat No. 191/1, Sandbhor Complex  
Mhalunge, Chakan, Tal Khed,  
Dist. Pune 410501, India  
Phone: +91 21 35329112  
Fax: + 91 20 40147576  
ACS Schaumburg – Corporate Offices  
1100 E. Woodfield Road  
Suite 588  
109 Xingpu Road SIP  
Suzhou, China 215126  
Phone: + 86 8717 1919  
Fax: +86 512 8717 1916  
Schaumburg, IL 60173  
Phone: + 1 847 273 7700  
Fax: + 1 847 273 7804  
Europe/Middle East/Africa
ACS New Berlin – Manufacturing Faci
2900 S. 160th Street  
ACS Warsaw  
Ul. Działkowa 115  
02-234 Warszawa  
Phone: + 48 22 390 9720  
Fax: +48 22 390 9724  
New Berlin, WI 53151  
Phone : +1 262 641 8600  
Fax: + 1 262 641 8653  
SFC-A  
Table of contents  
1. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
1.1. Warnings and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
1.2. Explanations and information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
1.3. For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
1.4. For the operating safety of the equipment. . . . . . . . . . . . . . . . . . 12  
2. Installation instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
2.1. Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
2.2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
2.3. Compressed air supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
2.4. Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
3. Functioning description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
3.1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
4. Putting into operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
4.1. Checking the settings of the conveying control. . . . . . . . . . . . . . 24  
4.2. Checking the line system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
5. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
5.1. Maintenance intervals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
5.2. Clean collecting container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
5.3. Clean/replace filter cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
4
SFC-A  
6. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
6.1. Data sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
7. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
7.1. Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
5
SFC-A  
1. Safety instructions  
These safety instructions apply to all persons within the  
range of action of the equipment.  
»
Please inform all persons within the range of action of the  
equipment of the direct and indirect hazards connected with  
the equipment.  
These operating instructions are to be used by all persons as-  
signed activities connected with the equipment.  
Knowledge of the English language is prerequisite.  
Ensure in each case that the operating personnel are familiar  
with the operating instructions and the function of the equip-  
ment.  
Safety instructions 6  
SFC-A  
1.1. Warnings and symbols  
The following warnings and symbols are used in these operating instructions:  
This symbol indicates danger to life! Fatal or serious injury is  
possible if the corresponding instructions, regulations or  
warnings are not observed.  
»
This symbol indicates that serious injury is possible if the cor-  
responding instructions, regulations or warnings are not ob-  
served.  
L
This symbol indicates that extensive damage to equipment is  
possible if the corresponding instructions, regulations or  
warnings are not observed.  
F
This symbol indicates information important for becoming fa-  
miliar with the equipment, i.e. technical correlations.  
&
This symbol indicates that a technical term is explained at this  
point.  
$
Safety instructions 7  
SFC-A  
1.2. Explanations and information  
Various terms and designations are used frequently in these operating instruc-  
tions to ensure clarity. Therefore please note that the terms used in the text stand  
for the corresponding explanations listed below.  
Equipment  
“Equipment” can mean an individual unit, a machine or an installation.  
·
Operating personnel  
The “operating personnel” are persons operating the equipment on their own re-  
sponsibility or according to instructions (minimum age: 16).  
·
Operator  
·
The “operator” of the equipment (production manager, foreman, etc.) is the per-  
son responsible for all production sequences. The operator instructs the operat-  
ing personnel of what is to be done.  
Operating instructions  
·
The “plant operating instructions” describe the interaction of the equipment, pro-  
duction sequences or methods. The plant operating instructions must be com-  
piled by the operator of the equipment.  
Equipment foreman  
·
When several operating personnel work on one machine, the “equipment fore-  
man” coordinates the sequences. The equipment foreman must be appointed by  
the operator.  
Trained personnel  
“Trained personnel” are persons who, due to their training, are authorized to carry  
out the required work in good practice.  
·
Safety instructions 8  
SFC-A  
1.3. For your safety  
The operating personnel of this equipment must be at least 16 years old.  
·
·
Please read these operating instructions carefully before taking into operation for  
the first time. Contact us should questions arise.  
This avoids injury and damage to equipment!  
These operating instructions must be kept available at all times at the place of op-  
eration of the equipment. Improper operation results in danger of accidents!  
·
·
Please note that, for reasons of clarity, not all conceivable cases regarding opera-  
tion or maintenance of the equipment can be covered in these operating instruc-  
tions.  
Please observe all safety instructions and warnings on the equipment.  
This avoids injury and damage to equipment!  
·
·
All work on the equipment is to be carried out by persons whose qualifications are  
specified in the pertaining chapters of the operating instructions.  
Improper operation results in danger of accidents!  
The proper working clothes are to be worn during any work on the equipment.  
This avoids injury!  
·
·
·
·
·
Compare the connected loads with those of the mains supply.  
Danger of injury through electrical shock!  
When using lifting gear, please observe the pertaining regulations.  
Caution: Danger of accidents!  
The local regulations and requirements pertaining to this equipment must be ob-  
served.  
Disconnect electrical components from the mains supply before work is carried  
out on these components. Caution: Danger to life through electrical shock!  
Safety instructions 9  
SFC-A  
Do not modify, add other equipment or change the design of the equipment with-  
out the approval of the manufacturer. Caution: Danger of accidents!  
·
·
Compile detailed operating instructions based on these Operating instructions for  
the sequence of procedures to be carried out on this equipment.  
Improper operation results in danger of accidents!  
Appoint an equipment foreman to be responsible for the equipment.  
·
·
Ensure that the operating personnel are provided detailed instruction in the oper-  
ation of the equipment. Improper operation results in danger of accidents!  
When the main switch is switched off for reasons pertaining to safety, it must be  
secured against unauthorized activation. Caution: Danger of accidents!  
·
Before starting maintenance work, appoint a supervisor.  
·
·
Inform the responsible personnel before maintenance work on the system is  
started. Caution: Danger of accidents!  
Disconnect the equipment from mains supply before starting maintenance proce-  
dures to ensure that it cannot be switched on unintentionally.  
Caution: Danger of accidents!  
·
Repair work may be carried out by trained personnel only.  
Caution: Danger of accidents!  
·
·
·
·
Never operate the equipment when partially dismantled!  
Danger! Limbs may be caught in machinery! Electric shock!  
In case of malfunction, shut down the equipment immediately. Have malfunctions  
corrected immediately. Danger of accidents!  
The equipment is intended only for conveying granulated plastics and regrinds.  
Any other or additional use is contrary to specifications.  
Safety instructions 10  
SFC-A  
This equipment is not suitable for food processing.  
·
·
Please note that sound levels exceeding 85 db(A) may in the long term damage  
your health. Use the appropriate ear muffs. This avoids impairment of hearing!  
Attachments not supplied by Sterling must be manufactured in accordance with  
safety regulation EN 294. Danger of accidents!  
·
·
All pipes, hoses and screwed connections should be checked regularly for leaks  
and damage. Any faults which arise should be corrected immediately.  
Danger of accidents!  
Depressurise all compressed air piping before starting maintenance work.  
Danger of accidents!  
·
·
The equipment may only be operated when all the associated components are  
properly connected up and in accordance with the relevant regulations.  
The equipment may only be used together with a conveying system.  
The safety instructions of the connected machines must be followed.  
·
·
Safety instructions 11  
SFC-A  
1.4. For the operating safety of the equipment  
Never change settings if the consequences are not precisely known.  
·
Use only original Sterling spare parts.  
·
Please observe the maintenance schedule.  
·
Keep record of all maintenance and repair work.  
·
Please note that electronic components may be damaged by static discharge.  
·
·
Check all electrical connections for proper fit before the equipment is taken into  
operation for the first time and at regular intervals.  
Never adjust sensors without exact knowledge of their function.  
Please note that the ambient temperature must not exceed 70 °C (158°F).  
The safety filter may only be used together with a conveying system.  
·
·
·
·
The safety filter requires a compressed-air supply (max. 5-6 bar (72-87 PSI) sys-  
tem overpressure).  
Never set a higher operating pressure than 6 bar (87 PSI) for the safety filter (sys-  
tem overpressure).  
·
Install the safety filter in the suction line right in front of the vacuum generator.  
·
·
Observe that the filter cleaning procedure is carried out while the vacuum genera-  
tor is running.  
Observe the operating instructions of the conveying system.  
·
Safety instructions 12  
SFC-A  
Check the collecting container for tightness following each cleaning procedure.  
Make sure that the one-way restrictor regulation should not be changed.  
The operating instructions of the connected machines must be followed.  
All components must be sufficiently grounded.  
·
·
·
·
Safety instructions 13  
SFC-A  
2. Installation instructions  
These installation instructions are intended for persons with  
skills in electrical and mechanical areas due to their training,  
experience and received instructions.  
»
Personnel using these installation instructions must be in-  
structed in the regulations for the prevention of accidents, the  
operating conditions and safety regulations and their imple-  
mentation.  
Ensure in each case that the personnel are informed.  
The installation instructions provided in the corresponding  
operating instructions apply for all connected equipment.  
Observe safety regulations with regard to lifting gear han-  
dling  
All installation work must be carried out with the equipment  
disconnected from electrical power and compressed air sup-  
ply.  
For installation work taking place at heights of over approx. 6  
feet, use only ladders or similar equipment and working plat-  
forms intended for this purpose. At greater heights, the  
proper equipment for protection against falling must be worn.  
L
Use only suitable lifting gear which is in proper working order  
and load suspension devices with sufficient carrying capac-  
ity. Do not stand or work under suspended loads!  
Use suitable workshop equipment.  
Installation instructions 14  
SFC-A  
Install the equipment such that all parts are easily accessible;  
this facilitates maintenance and repair work.  
F
Installation instructions 15  
SFC-A  
2.1. Transport  
The unit is delivered as a complete sub-assembly. Transport the unit on a pallet.  
Lift the unit only by the wall support flange (B) or by the separator container (A).  
Use only suitable lifting gear (e.g. hoisting crane or forklift).  
Observe the carrying capacity of the lifting gear.  
»
Observe the safety instructions for the handling of lifting  
gear.  
Never lift the unit by the pneumatique valve.  
F
C
A
C
B
SFC-A  
Installation instructions 16  
SFC-A  
2.2. Installation  
For installation, the wall support flange (A) is used.  
Install the safety filter by means of four screws which guaran-  
tee a carrying capacity of at least 100 kg (220 lbs.).  
F
Install the safety filter in the suction tube directly before the vacuum generator.  
Connect the line to the conveyor units to the tube of the hopper loader (B) by  
means of a flexible hose. Screw both parts together by means of a hose clamp.  
Connect the line to the vacuum generator to the tube of the compressed-air valve  
(C) by means of a flexible hose. Screw both parts together by means of a hose  
clamp.  
C
B
A
SFC-A  
Installation instructions 17  
SFC-A  
2.3. Compressed air supply  
For operation of the valve, a compressed-air supply (1/4 “) is needed.  
Check compressed air piping for correct installation and assembly.  
Check fittings, length and quality of the hose connections for agreement with re-  
quirements.  
The operating pressure is 5-6 bar (72-87 PSI) (system overpressure).  
Check the compressed air supplied by the plant’s supply network.  
Adjust compressed air pressure to 5-6 bar (72-87 PSI) (system overpressure).  
Compressed air must be dewatered and oiled.  
Install a maintenance unit (pressure reducer with water separator and oiler) if re-  
quired.  
Connect the unit to the plant’s supply network by means of a hose.  
Depressurize compressed air supply lines which must be  
opened.  
L
Compressed air must be dewatered and oiled.  
F
Adjust pressure to a max. value of 6 bar (87 PSI) (system  
overpressure).  
Installation instructions 18  
SFC-A  
2.4. Electrical connection  
The electrical connection may only be carried out by trained  
personnel.  
»
The regulations of the local Electricity Board must be ob-  
served.  
All work must be carried out with the unit disconnected from  
voltage and pressure supply.  
It is not permitted for other persons to undertake the electrical  
connection.  
Observe the electrical manual of the conveying system.  
F
Put the plug into the socket of the safety filter and secure it with the holding clamp.  
Installation instructions 19  
SFC-A  
Han6  
2
1
3
4
5
6
2
5
4
1
6
3
S1 = Safety switch  
AV = Cleaning valve, top  
VV = Vacuum valve, side  
S1  
AV  
VV  
Connection housing  
Installation instructions 20  
SFC-A  
3. Functioning description  
This functioning description is intended for all operating per-  
sonnel of the equipment.  
»
Prerequisite for this functioning description is general knowl-  
edge of conveying systems.  
Ensure in each case that the operating personnel are suffi-  
ciently informed.  
The safety filter may only be used together with a conveying  
system.  
&
Functioning description 21  
SFC-A  
3.1. General  
The safety filter is used to clean the vacuum air of the entire system and must be  
installed in every multi-location suction conveyor system .  
A filter cartridge inside the safety filter separates the vacuum air from the dust  
particles flowing along with it. Vacuum pressure is built up in the safety filter fol-  
lowing a filter monitoring period. Surrounding air is conducted into the safety filter  
by means of a valve. The direction of flow is opposite to the normal direction of  
flow. The dust is blown through the filter cartridge and collected in a receptacle.  
No materials are conveyed during the cleaning procedure. The cycle, during  
which the filter cartridge is cleaned, is adjustable. Observe the operating instruc-  
tions of the conveyor system.  
The filter cleaning procedure is carried out while the vacuum  
generator is running.  
&
The collecting container can be opened by hand for cleaning. The correct seating  
of the collecting container is monitored by a safety switch.  
The number and way of the setting depends on the connected conveying control.  
The filter cannot be cleaned unless the collecting container is  
correctly inserted.  
&
Functioning description 22  
SFC-A  
4. Putting into operation  
This chapter is intended for operating personnel.  
»
Prerequisite for this chapter is general knowledge of the op-  
eration of conveying systems.  
Also prerequisite for this chapter is that the functioning de-  
scription has been read and understood.  
Ensure in each case that the operating personnel are suffi-  
ciently informed.  
Check the compressed-air supply (max. 5-6 bar (72-87 PSI)  
system overpressure).  
F
Check the connections of the lines (conveying lines and vac-  
uum lines).  
Check to make sure the collecting container is correctly in-  
serted.  
Check the electrical connection.  
The safety filter can only be used together with a conveying  
system.  
&
Putting into operation 23  
SFC-A  
4.1. Checking the settings of the conveying control  
The number and way of the setting depends on the connected conveying control.  
This is a description of two possibilities.  
Surveillance time  
This is safety filter monitoring time between two cleanings. Has this time passed,  
the safety filter ist cleaned automatically.  
Cleaning cycles  
Number of cleaning pulses during a cleaning process.  
4.2. Checking the line system  
Remove the flexible line from the connected material receptacle.  
Start a conveying procedure.  
Use your hand to cover the open end of the line.  
As the vacuum generator runs up, you must feel the suction with your hand within  
a few seconds.  
If no vacuum pressure is felt, the system of lines is leaking.  
Check the system of lines and seal off the leak.  
Start the conveying procedure.  
Connect the conveyor line again.  
Putting into operation 24  
SFC-A  
5. Maintenance  
This chapter is intended for persons with skills in electrical  
and mechanical areas due to their training, experience and  
received instructions.  
»
Personnel using the instructions in this chapter must be in-  
structed of the regulations for the prevention of accidents, the  
operating conditions and safety regulations and their imple-  
mentation.  
Ensure in each case that the personnel are informed accord-  
ingly.  
For maintenance work taking place at heights of over approx.  
6 feet, use only ladders or similar equipment and working  
platforms intended for this purpose. At greater heights, the  
proper equipment for protection against falling must be worn.  
Use only suitable lifting gear which is in proper working order  
and load suspension devices with sufficient carrying capac-  
ity. Do not stand or work under suspended loads!  
Ensure that the electric motors/switch cabinets are suffi-  
ciently protected against moisture.  
Use only suitable workshop equipment.  
Before starting maintenance work, appoint a supervisor.  
Inform the responsible personnel before maintenance work  
on the system is started.  
Never operate the equipment when partially dismantled.  
All maintenance and repair work not described in this chapter  
may only be carried out by Sterling service personnel or au-  
thorized personnel (appointed by Sterling).  
Maintenance 25  
SFC-A  
Disconnect the equipment from mains supply before starting  
maintenance procedures to ensure that it cannot be switched  
on unintentionally.  
L
Depressurize all compressed air piping of the equipment be-  
fore starting maintenance work.  
Please observe the maintenance intervals.  
F
Before starting maintenance work, clean the equipment of oil,  
fuel or lubricants.  
Ensure that materials and incidentals required for operation  
as well as spare parts are disposed of properly and in an envi-  
ronmentally sound manner.  
Use only original Sterling spare parts.  
Keep record of all maintenance and repair procedures.  
Maintenance 26  
SFC-A  
5.1. Maintenance intervals  
Daily:  
Check warning signs on equipment for good  
legibility and completeness.  
Check the oil level in the oiler.  
Empty the water separator.  
Check operating pressure of the plant’s supply  
network (5-6 bar (72-87 PSI) system  
overpressure).  
Check waste level in the collecting container.  
Weekly/monthly:  
Clean filter cartridge in the safety filter  
(depending on accumulation of dust earlier!).  
Every six months:  
tions  
Check all electrical and mechanical connec-  
for secure fit.  
Replace the filter cartridge  
(depending on accumulation of dust earlier!).  
Check the sealing rings of the nonreturn valve  
and the outlet flap.  
This maintenance schedule is calculated for 3-shift opera-  
tion.  
&
Only the Sterling service should put the one-way restrictor  
into action.  
F
The given maintenance intervals are average values.  
Check whether in your individual case the maintenance inter-  
vals must be shortened.  
Maintenance 27  
SFC-A  
5.2. Clean collecting container  
For cleaning of the collecting container, the plant should be  
switched off.  
L
Open the toggle-type fasten-  
ers (C) on the support (B). The  
collecting container (A) turns  
down together with the holding  
clamp.  
Pull the collecting container  
(A) out of the holder.  
Clean the collecting container  
(A).  
Reinstall the collecting con-  
tainer (A) in the holder.  
Close the holder (B) and close  
the toggle-type fasteners (C).  
C
B
A
Check the collecting container  
for tightness.  
SFC-A  
Maintenance 28  
SFC-A  
5.3. Clean/replace filter cartridge  
Stop the conveying procedure.  
»
Switch off the conveying system at the main switch.  
Interrupt the mains supply.  
Set all compressed-air lines at zero pressure.  
Clogged filter cartridges reduce conveyor performance.  
&
Loosen the tightening strap (B) be-  
tween the separator lid (A) and separa-  
tor container (C).  
Remove the separator lid (A) from the  
separator container (C).  
A
B
C
Pull the filter cartridge out of the sepa-  
rator container (C).  
Use compressed air to blow through  
the filter cartridge from the inside to the  
outside or replace the filter cartridge.  
SFC-A  
Maintenance 29  
SFC-A  
Install the filter cartridge in the separator container (C).  
Install the separator lid (A) on the separator container (C).  
Mount the tightening strap (B) between the separator lid (A) and the separator  
container (C).  
Order number  
&
filter cartridge:  
ID 86348  
Maintenance 30  
SFC-A  
6. Technical data  
Versions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SFC-A 40/50  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SFC-A 65  
Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 mm (56") max.  
Diameter separator container: . . . . . . . . . . . . . . . . . . . . . . . . 400 mm (15.75")  
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . approx. 53 kg (123.5 lbs.)  
Filter cartridge: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . paper fleece  
2
Filter surface: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 m (63")  
Compressed air supply: . . . . . . . . . 4-6 bar (72-87 PSI) system overpressure  
Technical data 31  
SFC-A  
6.1. Data sheet  
A
SFC-A 40: 40 mm; 1,6"  
SFC-A 50: 50 mm; 2,0"  
SFC-A 65: 65 mm; 2,5 “  
4OO mm  
15.75"  
12 mm  
0.47"  
47O mm  
18.5"  
41O mm  
Dimensions in mm. Specifications may be subject to alterations.  
Technical data 32  
SFC-A  
7. Appendix  
Appendix 33  
SFC-A  
7.1. Spare parts list  
This spare parts list is intended to be used only by trained per-  
sonnel.  
»
Other persons are not permitted to modify or repair the equip-  
ment.  
Appendix 34  
SFC-A  
SFC-A 40/50/65  
80  
1
61  
17  
86  
12  
35  
85  
3
37  
14  
20  
49  
48  
21  
51  
34  
55  
68  
32  
16  
60  
69  
Appendix 35  
SFC-A  
Pos.  
01  
03  
12  
14  
16  
17  
20  
21  
32  
34  
35  
37  
48  
49  
51  
Orderno.  
93551  
96372  
98177  
98706  
95417  
93569  
86348  
27086  
09042  
99839  
15110  
09046  
17011  
99876  
Name  
Compressed-air cylinder  
Solenoid valve  
PVC fabric hose (0.7 m)(27.6")  
PVC fabric hose (1.0 m)(39.4")  
Sealing (1.35 m)(53.15")  
Profile tension ring  
2
Filter cartridge, conical 1.6 m(63")  
Compressed-air cylinder  
Container  
Sealing (1.4 m)(55.1")  
Sealing  
Filter  
Connection housing  
Profile tension ring  
85610  
17989  
Sealing SFC-A 40/65  
Sealing SFC-A 65  
55  
60  
61  
68  
69  
80  
85  
86  
93570  
96480  
95881  
99880  
00159  
86640  
13020  
88141  
Safety switch  
Toggle-type fastener  
Sealing (1.35 m)(53.15")  
Sealing (0.6 m)(23.6")  
Outlet flap  
Valve  
Sealing  
Valve  
Appendix 36  

Lexmark 90t6100 User Manual
Lexmark 3400 User Manual
Mitsubishi Motors Automobile Parts R5m3 User Manual
Panasonic Hq 2243th User Manual
Ricoh Aficio Mp C2800 User Manual
Samsung Aw1803m User Manual
Sanyo 18xls72 User Manual
Soleus Air Air Conditioner Gm Ttw 14 User Manual
Soleus Air Kfhhp 18 Id User Manual
York Predatortm Magnum Dj 150 User Manual