Sigma Battery Charger User Manual

Sigma  
Power Pack and Battery Charger  
2. Slide the ON/OFF switch [see Fig. 1 (2)]  
Owners Manual  
STANDARD ACCESSORIES  
to the OFF position before connecting the  
charger to your Digital device.  
Thank you for purchasing the Camlink Sigma  
Power Pack and Battery Charger. Please read  
this manual carefully. It contains important  
operating instructions.  
This unit is specially designed for charging  
batteries or power up your USB devices with  
a safe, multi-function powepack and torch.  
3. Insert 4 pieces of AAA rechargeable Ni-  
MH into the battery compartment.  
2
3
1
4. Choose the suitable connector (from  
Accessory no.4 to no.7) and connecting  
USB cable (Accessory no.2). Connect the  
USB cable with your digital deve and the  
Doutput see Fig. 1 (5)] othchrger.  
5. de he FF swch ee g1 (2)]  
the Oon to pere harger  
nd starharginproes
ChrgIntucos  
(FochAAA NiH batteries
. sert es f AA chgble Ni-  
MH batteries into the battery compartment,  
ensuring correct polarity ( + and - ) in  
accordance with the signs in the battery  
compartment.  
USB e nects  
the argo a  
digal dece  
Ule nns  
argto
cpuer UB prt  
CHAGEUNIT  
. he OFswee g. (2)]  
to the OFF position when the charger is  
not in use.  
4
Using as a Torch  
1. Insert 4 pieces of AAA rechargeable Ni-  
MH batteries into the battery compartment.  
2. Press the ON/OFF button [see Fig. 1 (3)]  
to turn the torch on or off.  
2. Slide the ON/OFF switch [see Fig. 1 (2)]  
to the ON position to operate the charger  
and start the charging process.  
3. When using with a operating computer  
(with Charger unit & USB cable - Accessory  
no.3)Connect the supplied USB cable plug  
thnpkeof tcargr  
ee F)]. luhe -pUSB p
o a rd USsoken your  
eratimutePlse ase  
your computer is installed with a standard  
USB port with output 5VDC, 500mA.  
4. When using indoors (with AC adaptor -  
Accessory no. 6) Connect the supplied  
AC adaptor plug into the DC input socket  
of the charger [see Fig. 1 (1)]. Plug the AC  
adaptor into household electric outlet (100-  
240V AC). The switching power supply will  
adjust automatically and the LED indicator  
will ght itantly. Cation: The spplied
aptplie5C nd elivrs A,  
d itits nto he C put soc
the r. sinan daor that doe
t meese peficonld  
damage the charger.  
Wrning  
Adatlusfr mbile tephones  
cluded es mut bchprior  
firus
Charge only Ni-MH batteries on this  
charger.  
Batteries may leak or explode causing  
personal injury if inserted improperly,  
disposed of in fire, mixed with other battery  
types, or short circuited.  
OTHER ACCESSORIES  
8
5
6
7
Features  
Recharges 4 pieces high capity AAA  
bafrom Copur USB  
evice.  
echargieces gh aptAAA  
-Mbafrm ehd ectric  
outlet (with Accessory no.6)  
Recharges 4 pieces high capacity AAA  
Ni-MH batteries from a Vehicle (with  
Accessory no.5)  
Power up your Digital devices using this  
charger (such as mobile phone, iPod,  
MP3, MP4, PDA/ DV/ DC/ PSP) please  
see table A for compatible mobile phones  
x AANH  
ch
baies  
DC ador  
Pg for
Aadpt
f1  
(3) LED torch ON/OFF switch  
5. When using in a vehicle (with DC adaptor  
- Accessory no.5)  
(1) DC Input  
(4) LED indicator  
Connect the supplied DC adaptor plug  
into the DC input socket of the charger  
[see Fig. 1 (1)]. Plug the large end of the  
cord into the 12V car lighter power socket  
and the LED indicator wlight instantly.  
6. The GREEN LED [see Fig. 1 (4)] will flash  
idiccorrct harng. Athe  
tterifucrg, tGEN  
ED wctinouicating t
ckle is on. he haed batteries  
e now dy fus7.pluch
and remove the batteries from the charger  
when not in use.  
2) ON/OFF  
(5DC output  
switch  
Power up your Digital devices sing the  
r dapccessoy n5) wer  
p USB s usinthe AC ptor  
ccess6)  
gQuED orc
Batteries life well protected by timer.  
Short-Circuit protection design against  
damage for your USB devices  
Special design LED indicator :GREEN  
LED flashing - Rapid charge; GREEN LED  
light ON – trickle charge  
8. Begin again at Step 1 to charge the next  
set of batteries.  
(6) Cover & battery  
compartment  
Charging your USB devices  
Specification  
Charger  
Input  
USB output  
Charge current  
5v 0.5a (from usb port)  
(with AAA rechargeale Ni-MH  
batteries)  
Safety Features  
accessory no.1  
5.5v 0.8 (frousb port of the charger)  
aaa x 4 : (5.0.3A 1.68VA)  
Negative Delta V cut-off proteon  
ftimpreveovcr
hort ciotectio
AC dar  
Int  
Outt  
Inp
Out
10240V /6z  
5DC 1A  
124V DC  
DA  
ore g, cthUSdice
put athcrgs outp
ltage hemchMake sure  
e toting oenoxcd e ed  
output current of the charger.  
accssno
DC dpt
eversey protetio
accry 5  
Size  
Charging Current  
Ni-MH  
600mAh  
Charging Time  
120minutes  
800mAh  
1000mAh  
160minutes  
200minutes  
AAA  
300mA  
Important Safety Instructions  
Charging your USB devices  
(with AC adaptor - Accessory no. 6)  
1. Before crging, read instructions  
2. This charger is intended for use with Nickel-metal-hydride rechargeae batteries  
ltteptinchaother typf bats may uspeoninjury  
dmato he chaer.  
1. Before using, check the USB device’s int voltage and the AC daptor’s  
utpvogto ee thy tcMakre e tag s
ecetred utt crrothe AC adaptor.  
o neoschargeain or oisturedoor ue oy.  
emve om mans whenon e.  
2. Cossuitbonecoehr Acceory or .7nd onctin
Uce (Asy noCnethUSe tyodial dice  
anthe DC ouut the aapt
5. eveusan sioled oanchmnoecndd b
manufacturer, otherwise this may result in a risk of fire, electric shock or injury  
to persons.  
3. Plug the AC adaptor into household electric outlet (100-240V AC). The switching  
power supply will adjust automatically and the LED indicator will light instantly.  
4. Switch on your Digital device.  
6. Do not operate the charger if it has been subjected to shock or damage. Take  
it to a qualified serviceman for repair.  
Charging your USB devices (with DC adaptor - Accessory no. 5)  
7. Do not disassemble the charger. Incorrect reassembly may result in a risk of  
electric shock or fire.  
1. Before using, check the USB device’s input voltage and the DC adaptor’s  
output voltage to see if they match. Make sure the total loading does not  
exceed the rated output current of the DC adaptor.  
8. Unplug the charger from outlet before attempting any maintenance or cleaning.  
9. This power unit is intended to be correctly orientated in a vertical or floor mount  
position.  
2. Choose a suitable connector (either Acceory no.4 or no.7) and onnecting  
USB cable (Accessory no.2). Connect thSB cable to your dial device  
d e Dtpof e daor.  
10.The appliance is not intended for use by young children or infirm ersons  
t serioYong children hld perviseto nse at they  
npwh the aliance.  
1.foscpg your chaer, remve the s from he nit ensure  
at ey e dped f sfeSATESTRCTRDUCE  
THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE  
INSTRUCTIONS.  
3. Pug te rge ef he ortthe 12car lighpweocet athe  
Liniator liinsty.  
4. Sch youigidevi
Fuse Replacement for DC adaptor To check or replace fuse, simply  
rotate the plastic tip at the end of the adaptor counterclockwise.Visually  
inspect fuse element. If blown or if you are unsure, replace fuse (1AMP).  

Mitsubishi Electronics Peh 3eakpeh 25eak User Manual
Ncomputing L130 User Manual
Ricoh Aficio Is 2425 User Manual
Samsung Aw12a6 A7 Jd User Manual
Sanyo Xh3672r User Manual
Snapper 6 1276 User Manual
Studer Innotec C3548 Compact User Manual
Whirlpool Ace244pt1 User Manual
Whirlpool Acq304xs0 User Manual
Whirlpool Xo7002wo User Manual