Sanyo Nc Mdu01 User Manual

Features  
Operating Instructions  
Cautions for Battery Charger Usage  
WARNING!  
• This is a small and slim eneloop charger for AA and AAA  
HOW TO CHARGE  
1. Insert one or two eneloop batteries into the charger. Raise or lower  
the adjuster depending on the type of battery to be charged.  
• Raise the adjuster to charge AA batteries.  
eneloop batteries.  
• This charger is only for AA and AAA Ni-MH  
batteries made by SANYO.  
• Do not attempt to charge alkaline batteries.  
• Do not connect equipment to other USB ports while  
charging. The available power required may be  
exceeded and the computer may be damaged or data  
may be lost.  
• One or two AA or AAA eneloop batteries can be charged.  
• No AC adapter is required.  
AA/AAA USB Charger Ni-MH  
• Lower the adjuster to charge AAA batteries.  
Operating Instructions  
Model: NC-MDU01  
• AA and AAA batteries cannot be charged at the same time.  
Note: Insert the batteries matching the polarity of the charger.  
2. Insert the USB connector of the charger into the USB port of an  
operating computer. Charging takes place when the LED charge  
Indicator is flashing.  
Thank you for purchasing this SANYO product. For safe  
and correct use, please read these instructions carefully.  
Please keep the instructions for later reference.  
LED Charge indicator  
PARTS DESCRIPTION  
• Do not connect via a USB connection cable. This may  
cause interference with other electrical equipment.  
• Do not use the charger in areas of high humidity or  
where it may be exposed to water.  
• Insert the batteries into the charger with matched  
polarity.  
d
Adjuster (+) c  
Raise for AA b  
Lower for AA  
Specifications  
Note: Do not connect other equipment to other USB ports on the  
computer while charging or the required Power may be exceeded.  
Charging might be stopped or the computer damaged or Data lost.  
The power supply capacity may be exceeded and charging may  
become impossible or the computer may be damaged and important  
data may be lost.  
SANYO Model No.  
Input  
NC-MDU01  
connector  
DC 5 V, max. 500 mA  
Output  
DC 1.2 V, 850 mA x 1 (Quick), 450 mA x 2  
housing  
(-) contact for  
and AAA  
Battery charge times  
(approx. minutes)*  
eneloop Ni-MH AA (typ. 2000 mAh)  
1 pc. 140 min, 2 pcs. 280 min  
• Disconnect the charger from the port after  
completion of charging.  
3. When charging has been completed the LED Charge indicator  
remains lit. Remove the USB connector from the USB port of the  
computer and remove the battery (batteries).  
• Lower the adjuster when the charger is not being  
used. Put the USB connector into USB housing of the  
charger.  
eneloop Ni-MH AAA (typ. 800 mAh)  
1 pc. 60 min, 2 pcs. 120 min  
• Directly after completion of charging, the battery is hot, but this  
is normal.  
(*) Guideline value only; actual charging times may vary slightly. Please refer  
to Operating Instructions.  
Note: If the adjuster has been raised, lower the adjuster for storage.  
• Do not pull the USB connector and the cord  
excessively.  
The following can be considered when the charge time is exceeded:  
HOW TO IN  
Dimensions (L x W x H)  
Weight  
93 x 47 x 17.5 mm  
Approx. 47 g  
• Do not touch the charger or the batteries with wet  
hands.  
Depending one or  
two AA or  
• Use the charger in the temperature range from 0 °C  
to 40 °C.  
Charging temperature  
range  
0 °C – 40 °C  
Raise the ad  
• Do not insert Metallic objects other than eneloop  
batteries into the charger.  
Connector type  
USB type A  
A batteries  
Models with a USB port as standard equipment  
where the computer manufacturer guarantees  
the operation of the USB port and has a USB  
port fitted as Standard equipment.  
Compatible computer  
models  
• Do not modify or disassemble the charger.  
• In case of abnormalities or trouble, disconnect the  
USB connector from the computer port and contact  
your dealer.  
• Keep the charger out of reach of small children. If  
children are to use the charger, keep them under  
observation.  
• Do not store the charger in locations with high  
humidity or dust.  
(*) Please refer to the instructions for your computer and cancel standby mode.  
LED Charge indication light  
– – – – – – – – Approx. every 1.5 sec  
Charging  
Temperature range  
Discharging (battery use)  
Charging  
–––––––––––  
Steady  
Charging completed (*)  
Battery abnormal  
-5 °C – 50 °C  
0 °C – 40 °C  
-20 °C – 30 °C  
- - - - - - - - - - - Approx. every 0.5 sec  
Not lit  
Stop during charging (computer  
standby mode etc.)  
Storage  
Usage outside of these temperature ranges may decrease the performance  
and/or the life of the battery.  
(*) When two batteries are being charged, the condition where charging of both  
batteries has been completed.  

Lexmark D01 User Manual
Master Lock Bh150ce User Manual
Panasonic Cu Xe9ckr User Manual
Ricoh Facsimile Reference Basic User Manual
Samsung Avmch105ea User Manual
Samsung Uq09sbge User Manual
Sanyo Ks1251 User Manual
Sanyo Twicell Hf E5u User Manual
Toshiba Carrier Rav Sp360at2 Ul User Manual
Trane Lo User Manual