Samsung Sgh X640 User Manual

* Some of the contents of this manual may differ from your phone,  
depending on the software installed or your service provider.  
SAMSUNG ELECTRONICS  
Printed in Korea  
Code No.:GH68-06679A  
English. 10/2005. Rev. 1.3  
World Wide Web  
Use road safety at all times  
Do not use a hand-held phone while driving. Park  
the vehicle first.  
Switch off the phone when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Important  
safety  
Switch off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
precautions  
Switch off the phone near all medical  
equipment  
Failure to comply with the following  
precautions may be dangerous or illegal.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external radio  
frequency energy. Follow any regulations or rules in  
force.  
 
Interference  
Keep your phone away from small children  
All wireless phones may be subject to interference,  
which could affect their performance.  
Keep the phone and all its parts, including accessories,  
out of the reach of small children.  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbidden  
to use it, or when it may cause interference or danger.  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories could  
damage your phone and may be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone  
is switched on.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
Emergency call  
For more detailed safety information, see "Health and  
safety information" on page 60.  
Key in the emergency number for your present  
location, then press  
.
1
 
About this Guide  
Simple, compact design with Intenna  
Samsung’s powerful intenna technology allows  
the best call quality without an annoying  
external antenna.  
This User’s Guide provides you with condensed  
information about how to use your phone. To quickly  
learn the basics for your phone, please refer to  
“Get started” and “Step outside the phone.”  
In this guide, the following instruction icons appear:  
Special  
features of your phone  
Indicates that you need to pay careful  
attention to the subsequent information  
regarding safety or phone features.  
Camera  
Use the camera module on your  
phone to take a photo.  
Indicates that you can get more  
information on the referenced page.  
Indicates that you need to press the  
Navigation keys to scroll to the specified  
option and then select it.  
WAP browser  
Access the wireless web and  
access various services and up-  
to-the-minute information.  
[
]
Indicates a key on the phone. For  
example, [ ]  
<
>
Indicates a soft key, whose function is  
displayed on the phone screen. For  
example, <Menu  
>
2
Voice clarity  
Calendar and To do list  
Keep track of your daily and  
monthly schedules and tasks.  
Use the voice clarity feature to increase the  
volume and clarity of an incoming call, even in  
the midst of a crowd.  
Voice recorder  
Record memos or sounds.  
Phonebook  
Store up to 1000 contact  
numbers.  
Java  
Get personal with photo  
caller ID  
See who’s calling you when their  
very own photo displays.  
Enjoy Java-based embedded  
games and download new  
games.  
Timer and stopwatch  
Multimedia Message Service (MMS)  
Send and receive MMS messages with a  
combination of text, images, and sounds.  
Count down to a specific event  
or measure the time it takes to  
do your exercise or work.  
3
Use Phonebook .................................................... 15  
Send messages.................................................... 15  
View messages .................................................... 16  
Manage schedule.................................................. 17  
Contents  
Unpack  
6
6
7
Enter text  
18  
20  
25  
Make sure you have each item  
Your phone  
ABC, T9, Number, and Symbol mode  
Call functions  
Buttons, features, and locations  
Get started  
Advanced calling features  
Menu functions  
First steps to operate your phone  
All menu options listed  
Solve problems  
Install and charge the phone ................................... 7  
Power on or off...................................................... 8  
Keys and display.................................................... 9  
Access menu functions.......................................... 11  
Customise your phone .......................................... 12  
Make/answer calls................................................ 13  
58  
60  
67  
Health and safety information  
Index  
Step outside the phone  
14  
Begin with your camera, WAP, messages, and other special  
features  
Use camera......................................................... 14  
Browse WAP........................................................ 14  
4
Overview of menu functions  
To access Menu mode, press <Menu> in Idle mode.  
Press <Phonebook> in Idle mode.  
1 SIM-AT*  
2
p.28  
Sound settings  
Organiser  
1 Phonebook  
p.25  
1 Find name  
2 Add entry  
3 Speed-dial list  
4 Copy all to phone  
5 Delete all  
p.25  
p.26  
p.27  
p.27  
p.27  
7 Calculator  
8 Conversion  
9 Timer  
p.50  
p.50  
p.50  
p.51  
7 Quiet mode  
8 Alerts on call  
p.34  
p.34  
2 Call records  
p.29  
5 Messages  
p.34  
1 Missed calls  
2 Received calls  
3 Dialled calls  
4 Delete all  
5 Call time  
6 Call costs*  
p.29  
p.29  
p.29  
p.29  
p.29  
p.30  
10 Stopwatch  
1 Short messages  
2 Multimedia messages p.36  
3 Push messages  
4 Preset messages  
5 Voice mail  
6 Broadcast  
7 Settings  
8 Memory status  
p.34  
8 Camera  
p.51  
2 Management  
p.28  
1 Take photos  
2 My photos  
3 My albums  
4 Delete all  
5 Settings  
6 Memory status  
p.51  
p.53  
p.54  
p.54  
p.54  
p.54  
p.38  
p.39  
p.39  
p.39  
p.40  
p.41  
1 Own number  
2 Group setting  
3 Memory status  
p.28  
p.28  
p.28  
3 Network services  
p.30  
3 Services  
p.28  
1 Call diverting  
2 Call barring  
3 Call waiting  
4 Network selection  
5 Caller ID  
6 Band selection  
7 Active line*  
p.30  
p.31  
p.31  
p.32  
p.32  
p.32  
p.32  
1 Service directory  
p.28  
9 Phone settings  
p.55  
6 Fun box  
p.42  
1 Display  
2 Greeting message  
3 Language  
p.55  
p.55  
p.55  
p.56  
p.57  
p.57  
p.57  
p.57  
p.57  
p.58  
1 WWW Services  
2 Media box  
3 JAVA world  
p.42  
p.44  
p.45  
4 Security  
7 Organiser  
p.46  
5 Auto redial  
6 Voiceclarity  
7 Active folder  
8 Side key  
9 Any key answer  
10 Reset settings  
4 Sound settings  
p.33  
1 New memo  
2 Calendar  
3 To do list  
4 Clock  
5 Alarm  
6 Voice recorder  
p.46  
p.47  
p.48  
p.48  
p.48  
p.49  
1 Incoming calls  
2 Messages  
3 Power on/off  
4 Connection tone  
5 Key tone  
p.33  
p.33  
p.33  
p.33  
p.33  
p.34  
6 Minute minder  
*Shows only if supported by your SIM  
card.  
5
 
Unpack  
Your phone  
Make sure you have each item  
Buttons, features, and locations  
Earpiece  
Display  
Camera lens  
Phone  
Travel adapter  
Navigation keys  
(Up/Down/Left/  
Right)  
Camera  
Key  
WAP access key  
Right soft key  
Mirror  
Headset jack  
Left soft key  
Battery  
User’s manual  
Power on/off/  
Menu exit key  
Service  
LED  
Volume keys  
Dial key  
You can obtain various accessories from  
your local Samsung dealer.  
Cancel/Correct  
key  
The items supplied with your phone  
and the accessories at your Samsung  
dealer may vary, depending on your  
country or service provider.  
Alphanumeric  
keys  
Microphone  
Special  
function keys  
6
         
Get started  
First steps to operate your phone  
Install the battery.  
Plug the travel adapter  
into the phone.  
3
4
SIM card information  
When you subscribe to a cellular network, you receive  
a plug-in SIM (Subscriber Identity Module) card  
loaded with your subscription details, such as your  
PIN, and available optional services.  
Install and charge the phone  
Plug the adapter into a standard AC wall outlet.  
Remove the battery.  
Insert the SIM card.  
5
6
1
2
When the phone is completely charged (the  
battery icon stops blinking), unplug the adapter  
from the power outlet.  
Make sure that the gold-  
coloured contacts on the  
card face down into the  
phone.  
If the phone is already  
on, first turn it off by  
holding [  
].  
7
           
Get started  
Power on or off  
Remove the adapter from the phone.  
7
Power on  
1. Open the phone.  
2. Press and hold [  
on the phone.  
] to turn  
Do not turn on  
the phone when  
mobile phone  
3. If necessary, enter the PIN and  
press <OK>.  
use is prohibited.  
Low battery indicator  
When the battery is low:  
Power off  
1. Open the phone.  
a warning tone sounds,  
the battery low message displays, and  
2. Press and hold [  
].  
the empty battery icon [  
] blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
8
     
Keys and display  
Key(s)  
Description  
Key(s)  
Description  
End a call.  
Hold down to switch the phone on and off.  
In Menu mode, cancels input and returns the  
phone to Idle mode.  
Perform the function indicated on the bottom  
line of the display.  
In Idle mode, access the following menus  
respectively.  
Enter numbers, letters, and some special  
characters.  
In Idle mode, hold [1] down to access your  
Up: Camera  
Down: Calendar  
Left: Create in Short messages  
Right: Incoming calls  
voicemail.  
Enter special characters.  
In Idle mode, hold  
[
]
down to activate or  
In Menu mode, scroll through the menu  
options.  
deactivate Quiet mode.  
Adjusts the phone volume.  
In Idle mode, adjusts the keypad tone  
volume.  
In Idle mode, launches the Wireless  
Application Protocol (WAP) browser.  
(on the left)  
Sends or answers a call.  
In Idle mode, retrieves the last number  
dialled, missed, or received.  
In Idle mode, hold down to turn on the  
camera.  
In Camera mode, takes a photo.  
Deletes characters from the display.  
In Menu mode, returns to the previous menu  
level.  
(on the right)  
In Idle mode, hold down to make a new  
memo.  
9
     
Get started  
Display  
Layout  
Alarm set  
Icons  
(continued)  
The display has the three areas.  
Call diverting feature is active  
p. 30  
Icons  
displays various icons.  
GPRS network  
Home zone, if you have registered  
for the appropriate service  
Text and graphics  
displays messages,  
instructions, and  
information you enter.  
Office zone, if you have registered  
for the appropriate service  
Soft key function  
Menu Phonebook  
indicators  
Quiet mode is activep. 12  
shows the current  
functions assigned to the  
two soft keys.  
Call ringer set to vibratep. 33  
Battery power level  
Received signal strength  
Call in progress  
Icons  
Out of your service area; you  
cannot send or receive calls  
New text message  
New voicemail message  
New multimedia message  
10  
     
Access menu functions  
Select an  
option  
1. Press the appropriate soft key.  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you are  
using. The bottom line of the  
2. Press the Navigation keys to  
move to the next or previous  
option.  
display indicates their current role.  
3. Press <Select> to confirm the  
function displayed or option  
highlighted.  
Menu  
Phonebook  
4. To exit, choose either of the  
following methods:  
Press < > or [  
up one level.  
C] to move  
Press [  
mode.  
] to return to Idle  
Press the left soft  
key to access  
Menu mode.  
Press the right soft  
key to access the  
Phonebook menu.  
Use shortcuts Press the number key  
corresponding to the option you  
want.  
11  
 
Get started  
Customise your phone  
3. Scroll to an image and press  
View>.  
<
1. In Idle mode, press <Menu  
and select Phone settings  
Language  
>
Display  
language  
4. Scroll to the image you want.  
Text language.  
5. Press <Select>.  
2. Select a language.  
You can change the colour for the  
display components, such as title  
bars and highlight bars.  
Menu mode  
Skin colour  
1. In Idle mode, press <Menu  
>
Call ringer  
melody  
and select Sound settings  
Incoming calls  
.
1. In Idle mode press <Menu  
and select Phone settings  
Display Skin  
2. Select a colour pattern.  
>
2. Select a sound category.  
3. Select a ringer melody.  
.
You can set a wallpaper for the idle  
screen.  
Idle mode  
wallpaper  
You can switch the phone to Quiet  
mode to avoid disturbing other  
people with your phone sounds.  
Quiet mode  
1. In Idle mode, press <Menu  
>
and select Phone settings  
Press and hold [ ] in Idle mode.  
Display  
Wallpaper  
.
2. Select a image category.  
12  
     
Make/answer calls  
You can protect the phone against  
unauthorised use with a phone  
password.  
Phone lock  
1. Enter an area code and phone  
Make a call  
number.  
1. In Idle mode, press <Menu  
>
2. Press [ ].  
and select Phone settings  
3. To end the call, press [  
].  
Security  
password  
2. Enter the default password,  
Change  
.
1. When the phone is ringing,  
press [ ].  
Answer a call  
“00000000” and press <OK>.  
2. To end the call, press [  
].  
3. Enter a new 4- to 8- digit  
password and press <OK>.  
Press [ / ].  
Adjust the  
volume during  
a call  
4. Enter the new password again  
and press <OK>.  
5. Select Phone lock  
6. Select Enable  
7. Enter the password and press  
OK>.  
.
.
<
13  
 
Browse WAP  
Step outside the phone  
Using a built-in WAP (Wireless Access Protocol)  
browser, you can get easy access to the wireless web  
to receive a variety of latest services and information  
and to enjoy download of web contents.  
Begin with your camera, WAP, messages, and other  
special features  
Use camera  
In Idle mode, press [ ].  
1. Open the phone.  
Launch the  
browser  
Take a photo  
2. In Idle mode, press and hold  
[
] to turn on the camera.  
3. Aim the lens at the subject and  
adjust the image.  
To scroll through browser items,  
press [Up] or [Down].  
Navigate the  
web  
4. Press [ ] to take a photo. The  
photo is saved automatically.  
To select an item, press < >.  
To return to the previous page,  
press [C].  
5. Press [C] to take another  
photo.  
To access the browser menus,  
press <Menu> and select  
1. In Idle mode, press [Up].  
2. Select My photos  
Browser Menu  
.
View a photo  
.
To access the WAP page  
options, press [ ].  
3. Scroll to the photo you want.  
4. Press <View>.  
14  
         
Use Phonebook  
1. In Idle mode, press  
Phonebook> and select Find  
name  
Find an entry  
<
To the phone’s memory  
Add an entry  
.
1. In Idle mode, enter a phone  
2. Select an entry.  
number and press <Save>.  
3. Select a number, if necessary.  
2. Select Phone  
.
4. Press [ ] to dial or  
3. Select a number type.  
4. Enter a name and press <OK>.  
To the SIM card  
<Options> to access options.  
Send messages  
1. In Idle mode, enter a phone  
1. In Idle mode, press [Left], or  
number and press <Save>.  
Send a text  
message (SMS)  
press <Menu> and select  
2. Select SIM  
.
Messages  
Create  
Short messages  
3. Enter a name and press <OK>.  
4. Enter a location number.  
.
2. Enter the message text.  
5. Press <OK> to save the entry.  
3. Press <Options> and select  
Send  
.
4. Enter a destination number.  
5. Press <OK> to send the  
message.  
15  
   
Step outside the phone  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Create  
>
11.Press <Opt.> and select Send  
12.Select an empty location.  
13.Enter a destination.  
.
Send a  
multimedia  
message  
(MMS)  
.
14.Press <Send> to send the  
2. Press <Add> on the Subject  
message.  
line.  
3. Enter the message subject and  
View messages  
press <OK>.  
4. Press <Add> on the Picture  
When a notification appears:  
View a text  
message  
line.  
Press <View>. The message  
displays.  
5. Add an image file.  
6. Scroll to the Sound line and  
From the Inbox:  
press <Add>.  
1. In Idle mode, press <Menu  
>
Short  
7. Add a sound file.  
and select Messages  
messages Inbox  
2. Select a message.  
8. Scroll to the Message line and  
.
press <Add>.  
9. Enter the message text.  
10.Press <Opt.> and select Done  
.
16  
 
Manage schedule  
When a notification appears:  
View a  
multimedia  
message  
1. Press <View>.  
1. In Idle mode, press and hold  
].  
Create a new  
memo  
[C  
2. Press <Options> and select  
Retrieve. The message  
displays.  
2. Enter the memo content and  
press <OK>.  
From the Inbox:  
3. Select a memo type.  
4. Select a date.  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Inbox  
2. Select a message.  
>
5. Enter the time for the memo  
and press <OK>.  
.
6. Press <Yes> to set an alarm.  
7. Enter the time for the alarm to  
ring and press <OK>.  
1. Press and hold [  
1] in Idle  
Access a  
8. Select an alarm tone.  
mode.  
voicemail  
2. Follow the instructions from the  
system.  
1. In Idle mode, press <Down>.  
2. Select a date.  
Access your  
schedule  
3. Press <Left> or <Right> to  
view the schedule for that day.  
17  
 
Using ABC mode  
Press the appropriate key until the character you want  
appears on the screen.  
Enter text  
ABC, T9, Number, and Symbol mode  
You can enter text for some features such as  
messaging, Phonebook, or Organiser, using ABC  
mode, T9 mode, Number mode, and Symbol mode.  
Characters in order displayed  
Key  
Upper case  
Lower case  
1
2
3
4
5
6
7
8
9
0
.
,
-
?
!
@
:
1
A
D
G
J
B
C
F
I
2
3
4
5
a
d
g
j
b
e
h
k
c
f
i
2
Changing the text input mode  
The text input mode indicator displays when the  
cursor is in a text field.  
E
H
K
N
Q
U
3
4
5
L
l
To change the text input mode, press the right soft  
key and select a text input mode.  
M
P
T
O
6
m
p
t
n
o
6
R
V
Y
S
8
7
9
q
r
s
7
Example: Entering a name in Phonebook  
u
v
8
W X  
0
Z
w
x
y
z
9
Tips for using ABC mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the cursor  
to move to the right automatically or press [Right].  
Then, enter the next letter.  
Text input mode  
indicator  
18  
         
Press [ ] to insert a space.  
3. When the word displays correctly, go to step 4.  
Otherwise, press [ ] to display alternative word  
choices. For example, Of and Me use [ ] and [3].  
0
Press [ ] to change case. Capital lock ( ), Lower  
case (No indicator), and Initial capital ( ) are  
available.  
6
4. Press [ ] to insert a space and enter the next  
word.  
Press [Left] or [Right] to move the cursor.  
Press [  
and hold [  
C
] to delete characters one by one. Press  
Tips for using T9 mode  
C] to clear the display.  
Press [  
automatically.  
Press [ ] to change case in T9 mode. Capital lock  
1] to enter periods or apostrophes  
Using T9 mode  
(
(
), Lower case (No indicator), and Initial capital  
) are available.  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes.  
Press [Left] or [Right] to move the cursor.  
Press [ ] to delete characters one by one. Press  
and hold [ ] to clear the display.  
Entering a word in T9 mode  
C
1. Press [2] to [9] to start entering a word. Press  
C
each key once for each letter.  
Adding a new word to the T9 dictionary  
This feature may not be available for some languages.  
1. Enter the word that you want to add.  
For example, press [4], [3], [5], [5], and [6] to  
enter Hello.  
T9 predicts the word that you are typing, and it  
may change with each key that you press.  
2. Press [0] to display alternative words for your key  
2. Enter the whole word before editing or deleting  
characters.  
presses. When there are no more alternative  
words, Spell displays on the bottom line.  
19  
 
3. Press <Spell>.  
Call functions  
4. Enter the word you want using ABC mode and  
press <OK>.  
Advanced calling features  
Using Number mode  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
Number mode enables you to enter numbers.  
Press the keys corresponding to the digits you want.  
2. Press [ ].  
Press [  
C
]
to clear the last digit or press and hold  
Using Symbol mode  
Symbol mode enables you to insert symbols.  
[C] to clear the whole display. You can move the  
cursor to edit an incorrect digit.  
To  
Press  
Making an international call  
1. In Idle mode, press and hold [  
appears.  
display more symbols  
select a symbol  
[Up] or [Down].  
0]. The  
+
character  
the corresponding  
number key.  
2. Enter the country code, area code, and phone  
number, then press [ ].  
clear the symbol(s)  
insert the symbol(s)  
[C].  
Redialling recent numbers  
1. In Idle mode, press [ ] to display the list of  
recent numbers.  
<OK>.  
2. Scroll to the number you want and press [ ].  
20  
         
Making a call from Phonebook  
Tips for answering a call  
When Anykey answer is active, you can press  
any key to answer a call, except for [ p. 57  
Once you have stored a number in Phonebook, you  
can dial the number by selecting it from  
]ꢀ  
Phonebook.p. 25  
When Active folder is active, you can just open  
the phone to answer a call.  
You can also use the speed dial feature to assign your  
most frequently called numbers to specific number  
Press [  
] to reject a call.  
keys.  
p. 27  
Depending on the Side key setting, you can press  
and hold [ / ] to mute the ringer or reject a  
Dialling a number from the SIM card  
call.  
p. 57  
1. In Idle mode, enter the location number for the  
phone number you want and press [ ].  
Viewing missed calls  
2. Scroll through other numbers.  
3. Press <Dial> or [ ] to dial the number you want.  
If you have missed calls, the screen displays how  
many calls you have missed.  
Ending a call  
1. Press <Missed>.  
2. If necessary, scroll through the missed calls.  
3. Press [ ] to dial the number you want.  
Close the phone or press [  
].  
Answering a call  
When you receive an incoming call, the phone rings  
and displays the incoming call image.  
Press [ ] or <Accept> to answer the call.  
21  
   
Call functions  
Recording your call conversation.  
Press <Options> and select Conv. record to record  
your conversation during a call.  
Using the headset  
Use the headset to make or answer calls without  
holding the phone.  
Access your recorded conversation in the Voices  
menu.  
Connect the headset to the jack on the right side of  
the phone.  
The buttons on the headset work as listed below:  
Placing a call on hold/Retrieving  
Press <Hold> or <Retrie.> to place the call on hold  
or retrieve the call.  
To  
Press  
redial the last call  
answer a call  
end a call  
the button twice.  
and hold the button.  
and hold the button.  
Making a second call  
You can make another call if your network supports it.  
1. Press <Hold> to put the call on hold.  
2. Make the second call in the normal way.  
3. Press <Swap> to switch between the calls.  
Options during a call  
You can access a number of functions during a call.  
4. Press <Options> and select End held call to end  
the call on hold.  
Adjusting the volume during a call  
Use [ / ] to adjust the earpiece volume during a call.  
5. To end the current call, press [  
].  
Press [ ] to increase the volume level and [ ] to  
decrease the volume level.  
22  
     
Answering a second call  
Using the voice clarity feature  
You can answer an incoming call, if your network  
supports it and you have activated the call waiting  
This feature removes extraneous noise and increases  
call quality so that the person with whom you are  
speaking can hear you clearly even if you are in a  
noisy place.  
feature.p. 31  
1. Press [ ] to answer the call. The first call is  
automatically put on hold.  
Press <Options> and select Voiceclarity on or  
Voiceclarity off  
.
2. Press <Swap> to switch between the calls.  
3. Press <Options> and select End held call to end  
Switching off the microphone (Mute mode)  
the call on hold.  
You can temporarily switch off your phone’s  
microphone so that the person on the phone cannot  
hear you.  
4. To end the current call, press [  
].  
Transferring a call  
You can transfer the current call to the call on hold so  
the callers can talk to each other.  
Press <Options> and select Mute or Unmute  
.
Muting or sending key tones  
You can turn the key tones off or on.  
Press <Options> and select Transfer  
.
Press <Options> and select Mute keys or Send  
keys  
Using the loudspeaker  
You can talk and listen to the phone a short distance  
away.  
.
To communicate with answering machines or  
computerised telephone systems, Send keys must  
be selected.  
Press <Options> and select Loud spk. on or Loud  
spk. off  
.
23  
         
Call functions  
Sending a sequence of DTMF tones  
Using the SIM service  
Dual tone multi-frequency (DTMF) tones are the tones  
used in phones for tone dialling.  
The SIM service menu is available if you use a SIM  
card in your phone. A SIM card provides services such  
as news, weather, sports, entertainment, and location  
services.  
You can send DTMF tones as a group after entering the  
entire number you need to send or retrieving a  
number from Phonebook. This feature is helpful for  
entering a password or an account number when you  
call an automated system, like a banking service.  
For details, see your SIM card instructions or contact  
your service provider.  
Making a multi-party call  
1. When connected with a teleservice system, press  
Use this feature to allow as many as six people to join  
a multi-party call, or conference call.  
<
Options> and select Send DTMF  
2. Enter the number you need to send and press  
OK>.  
.
<
Your service provider must support multi-party calls  
for you to use this feature.  
Using Phonebook  
You can access the Phonebook menu to locate or  
store entries.  
Setting up a multi-party call  
1. Call the first participant.  
p. 25  
2. Call the second participant. The first call is  
automatically put on hold.  
Press <Options> and select Phonebook  
.
3. Press <Options> and select Join. The first  
Using the message service  
participant is added to the multi-party call.  
You can access the Messages menu to read an  
incoming message and send a new message.  
Press <Options> and select Message  
4. If desired, call another person or answer an  
incoming call.  
p. 34  
.
24  
   
5. Press <Options> and select Join  
.
Menu functions  
6. Repeat steps 4 and 5 as desired.  
All menu options listed  
Having a private conversation with one  
participant  
Phonebook  
1. Press <Options> and select Split  
.
You can store phone numbers on your SIM card and in  
your phone’s memory. The SIM card and phone’s  
memory are physically separate, but they are used as  
a single entity called Phonebook.  
2. Select a name or number from the participant list.  
You can talk privately with that person, while the  
other participants converse with each other.  
3. To return to the multi-party call, press <Options  
>
You can manage your Phonebook entries and access  
the service directory in the Phonebook menu  
and select Join  
.
Dropping one participant  
To access this menu, press <Phonebook> in Idle  
mode.  
1. Press <Options> and select Remove  
.
2. Select a name or number from the participant list.  
Find name (Phonebook 1.1)  
The participant is dropped from the call, but the  
call continues with the other parties.  
Use this menu to search for numbers in Phonebook.  
3. Close the phone or press [  
multi-party call.  
] to end the  
Finding an entry  
1. Enter the first few letters of the name that you  
want to find.  
2. Select the name you want from the list.  
25  
             
Menu functions  
3. If you selected an entry in the phone’s memory,  
scroll to the number or information item you want.  
3. Select a number type.  
4. Enter a name and press <OK>.  
4. Press [ ] to dial the number, or <Options> or  
5. Press [Right] and change the settings or enter  
information about the contact.  
<Edit> to change the information.  
Mobile  
number in any category.  
Email: assign an e-mail address.  
Note: add a memo about the person.  
Group: assign the number to a caller group.  
Graphic: assign an image as a caller ID image  
to alert you to a call from the number.  
Alert: assign a ringer melody to alert you to a  
call from the number.  
/Home/Office/Fax/Other: add a  
Using Phonebook options  
While viewing a contact in Phonebook, press  
<Options> to access the following options:  
Edit number: change the currently selected  
number.  
Change name: change the contact’s name.  
Send message: send an SMS message.  
Copy: copy the number to the phone’s memory or  
SIM card.  
Storing a number on the SIM card  
1. Enter a number and press <Save>.  
1. Select SIM  
Delete entry: delete the entry.  
Add entry (Phonebook 1.2)  
2. Enter a name and press <OK>.  
Use this menu to add a new contact to Phonebook.  
3. If necessary, change the location number and  
Storing a number in the phone’s memory  
1. Enter a number and press <Save>.  
press <OK>.  
2. Select Phone  
.
26  
           
Dialling speed dial entries  
Speed-dial list (Phonebook 1.3)  
Press and hold the appropriate key in Idle mode.  
Use this menu to assign speed dial numbers (2 to 9)  
for eight of your most frequently called numbers.  
Copy all to phone (Phonebook 1.4)  
Assigning speed dial entries  
Use this menu to copy all of the entries on the SIM  
card to the phone’s memory.  
1. Select a key location from  
for your voice mail server.  
2
to  
9. Key  
1
is reserved  
The numbers will be copied, labelled with Mobile by  
default.  
2. Select Edit number  
.
3. Enter a phone number, or press <Phonebook  
>
and select the contact you want from the contact  
list.  
Delete all (Phonebook 1.5)  
Use this menu to delete all entries in each memory  
location.  
4. Press <OK>.  
Managing speed dial entries  
1. Press <Select> to check the memory locations to  
After setting speed dial entries, select it to access the  
following options:  
be cleared.  
2. Press <OK>.  
Edit number: assign a different number to an  
assigned key.  
3. Press <Yes> to confirm the deletion.  
4. Press the phone password and press <OK>.  
Change name: assign a name to the entry or  
change the name.  
The password is preset to 00000000. You can  
change this password.p. 56  
Delete: clear all speed dial settings.  
27  
         
Menu functions  
Own number (Phonebook 2.1)  
Service directory (Phonebook 3.1)  
Use this feature to check your phone numbers, or to  
assign a name to each of the numbers.  
This menu is available if your SIM card supports  
Service Dialling Numbers (SDN). Use this menu to  
view the list of SDNs assigned by your service  
provider, including emergency numbers, directory  
enquiries, and voice mail numbers.  
Changes made here do not affect the actual subscriber  
numbers on your SIM card.  
Group setting (Phonebook 2.2)  
Scroll to the number you want and press <Dial> or  
[
].  
Use this menu to change the properties of caller  
groups.  
SIM-AT (Menu 1)  
Melody: select a melody to sound when a call  
comes in from a member of the group.  
This menu is available if you use a SIM AT card that  
provides additional services, such as news, weather,  
sports, entertainment, and location services. Available  
services may vary, depending on your service  
provider’s plans.  
Change name: change the group name.  
View image: view an image to display when a call  
comes in from a member of the group.  
For details, see your SIM card instructions or contact  
your service provider.  
Memory status (Phonebook 2.3)  
Use this menu to check the number of entries you  
have saved and the total number of entries you can  
save in the phone’s memory and on the SIM card.  
28  
         
Dialled calls (Menu 2.3)  
Call records (Menu 2)  
This menu displays the most recent calls you have  
dialled.  
Use this menu to view the calls you have dialled,  
received, or missed, the length of your calls, and the  
cost of your calls.  
Delete all (Menu 2.4)  
To access this menu, press <Menu> in Idle mode and  
select Call records  
.
Use this menu to delete all of the records in each call  
type.  
Missed calls (Menu 2.1)  
1. Press <Select> to check the call type(s) to be  
cleared.  
This menu displays the most recently received calls  
that you did not answer.  
2. Press <OK>.  
While viewing a call record, press <Options> to  
3. Press <Yes> to confirm the deletion.  
access the following options:  
Call time (Menu 2.5)  
Delete: delete the call record.  
Delete all: delete all call records.  
This menu displays the time log for calls made and  
received. The actual time invoiced by your service  
provider will vary.  
Paste: paste the number of the call into the  
dialling mode screen.  
Last call time: check the length of your last call.  
Received calls (Menu 2.2)  
Total sent: check the total length of all the calls  
you have dialled.  
This menu displays the most recent calls you have  
received.  
Total received: check the total length of all the  
calls you have received.  
29  
                   
Menu functions  
Reset timers: reset the call timers. You need to  
enter the phone password.  
Price/Unit: set the price per unit that is applied  
when the cost of your calls is calculated. You need  
to enter your PIN2.  
The password is preset to 00000000. You can  
change this password.p. 56  
Network services (Menu 3)  
Call costs (Menu 2.6)  
Use this menu to access network services. Please  
contact your service provider to check their availability  
and subscribe to them, if you wish.  
This network feature displays the cost of calls. This  
menu is available only if your SIM card supports this  
feature. Note that this is not intended to be used for  
billing purposes.  
To access this menu, press <Menu> in Idle mode and  
select Network services  
.
Last call cost: check the cost of your last call.  
Call diverting (Menu 3.1)  
Total cost: check the total cost of all of your calls.  
If the total cost exceeds the maximum cost set in  
Set max cost, you must reset the counter before  
you can make another call.  
This network service reroutes incoming calls to a  
phone number that you specify.  
1. Select a call diverting option:  
Max cost: check the maximum cost limit set in  
Divert always: divert all calls.  
Set max cost  
.
Busy: diver calls when you are on another call.  
No reply: divert calls when you do not answer  
the phone.  
Reset counters: reset the cost counters. You  
need to enter your PIN2.  
Set max cost: set the maximum cost authorised  
for your calls. You need to enter your PIN2.  
Unreachable: divert calls when you are not in  
an area covered by your service provider or  
when your phone is switched off.  
30  
       
Cancel all: cancel all call diverting options.  
Incoming while abroad: prohibit incoming  
calls when you use your phone outside of your  
home country.  
Cancel all: cancel all call barring settings,  
allowing calls to be sent and received normally.  
Change barring password: change the call  
barring password obtained from your service  
provider.  
2. Select the type of calls to be diverted.  
3. To activate call diverting, select Activate  
.
Otherwise, select Remove  
.
4. Enter the number to which calls are to be diverted  
and press <OK>.  
5. If you selected No reply, select the length of time  
the network delays before diverting a call and  
press <Select>.  
2. Select the type of calls to be barred.  
3. Press <Activate>. To deactivate call barring,  
press <Deactivate>.  
Call barring (Menu 3.2)  
4. Enter the call barring password supplied by your  
This network service allows you to restrict your calls.  
1. Select a call barring option:  
service provider and press <OK>.  
Call waiting (Menu 3.3)  
All outgoing: prohibit all outgoing calls.  
International: prohibit international calls.  
International except to home: only allow  
calls to numbers within the current country  
when you are abroad, and to your home  
country, defined as where your home network  
provider is located.  
This network service informs you when someone is  
trying to reach you while you are on another call.  
1. Select the type of calls to which the call waiting  
option will apply.  
2. Press <Activate>. To deactivate call waiting,  
press <Deactivate>.  
All incoming: prohibit incoming calls.  
31  
               
Menu functions  
Network selection (Menu 3.4)  
Band selection (Menu 3.6)  
This network service allows you to either automatically  
or manually select the network used when roaming  
outside of your home area.  
For the phone to make and receive phone calls, it  
must register with an available network. Your phone  
can handle any of the following types of networks:  
GSM 1900 and Combined GSM 900/1800.  
You can select a network other than your home  
network only if there is a valid roaming agreement  
between the two.  
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you must remember to change to an  
appropriate band.  
Automatic: connect to the first available network  
when roaming.  
When you select a new band, your phone  
automatically searches for all available networks. Your  
phone registers with a preferred network within the  
band.  
Manual: select the network you want.  
Caller ID (Menu 3.5)  
This network service allows you to prevent your phone  
number from being displayed on the phone of the  
person being called. However, some networks do not  
allow the user to change this setting.  
Active line (Menu 3.7)  
Some SIM cards may be used with two subscriber  
numbers. Use this menu to select the line to be used  
to make calls, if your SIM card supports two numbers.  
Default: use the default setting provided by the  
network.  
Hide number: ensure your number does not  
display on the other person’s phone.  
Calls come in on both lines, regardless of the  
selected line.  
Send number: send your number each time you  
make a call.  
32  
           
Messages (Menu 4.2)  
Sound settings (Menu 4)  
Use this menu to set up the ringer for incoming SMS  
messages and MMS messages.  
Use this menu to customise various sound settings.  
Incoming calls (Menu 4.1)  
Tone: select one of several message tones.  
Alert type: specify how you are informed of any  
incoming messages.  
Use this menu to set up the ringer for incoming calls.  
Default melodies: select one of the preset  
melodies.  
Repetition: specify how often the phone informs  
you of a new message.  
My sounds: select one of sounds downloaded  
from the wireless web or Samsung PC Studio  
programme, or received by MMS.  
Power on/off (Menu 4.3)  
Use this menu to select the melody that the phone  
sounds when it is switched on or off.  
Ring volume: adjust the ringer volume.  
Alert type: specify how you are to be informed of  
incoming calls.  
Connection tone (Menu 4.4)  
Melody: the phone rings using the selected ring  
tone.  
Use this menu to set the phone to beep when it is  
connected to the system.  
Vibration: the phone vibrates but not rings.  
Vibration then melody: the phone vibrates three  
times and then starts ringing.  
Key tone (Menu 4.5)  
Use this menu to select the tone that the phone  
sounds when you press a key.  
Light only: the phone flashes the service light.  
You can adjust the keypad tone volume using  
[ / ] in Idle mode.  
33  
             
Menu functions  
To access this menu, press <Menu> in Idle mode and  
select Messages  
Minute minder (Menu 4.6)  
.
Use this menu to set the phone to beep every minute  
during an outgoing call to keep you informed of the  
length of your call.  
Short messages (Menu 5.1)  
Short Message Service (SMS) allows you to send or  
receive text messages including pictures, audio clips,  
and animated images.  
Quiet mode (Menu 4.7)  
Use this menu to set how the phone acts to alert you  
to a specific event in Quiet mode, instead of making  
sounds.  
The maximum number of characters allowed in a  
short message varies by service provider. If your  
message exceeds the maximum number of  
characters, the phone will split the message.  
Vibration: set the phone to vibrate.  
Mute: mute all sound settings.  
Create (Menu 5.1.1)  
Alerts on call (Menu 4.8)  
You can create and send a text message.  
1. Enter your message.  
Use this menu to select whether or not the phone  
informs you when you receive a new message or when  
the time for an alarm comes during a call.  
You can enter up to 160 standard characters, or  
approximately 70 Unicode characters, such as ‘â.  
2. Press <Options> to access the following options:  
Messages (Menu 5)  
Text: change the text attributes.  
Add media: add a picture, an animated image,  
or a melody to the message.  
Use the Messages menu to send and receive short  
messages and multimedia messages. You can also use  
WAP push message, Voice mail, and Cell broadcast  
message features.  
Preset messages: retrieve a text template.  
34  
                     
Save message: save the message to Outbox  
so that you can send it later.  
Transfer: move the message between the SIM  
card and the phone’s memory.  
3. Press <Options> and select Send  
.
Outbox (Menu 5.1.3)  
4. Enter a destination number.  
You can view sent or saved text messages.  
To send the message to more than one  
destinations, press <Add> and repeat this step.  
While viewing a message, press <Options> to access  
the following options:  
5. When you have finished, press <OK> to send the  
Delete: delete the message.  
message.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Inbox (Menu 5.1.2)  
You can view received text messages in this menu.  
Send: forward the message.  
While viewing a message, press <Options> to access  
the following options:  
Edit: edit the message.  
Transfer: move the message between the SIM  
Delete: delete the message.  
Message reply: reply to the sender.  
Call back: call the sender.  
card and the phone’s memory.  
Delete all (Menu 5.1.4)  
Use this menu to delete all of your messages in each  
message box.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
1. Press <Select> to check the message boxes to be  
Send: forward the message.  
cleared.  
Edit: edit the message.  
2. Press <OK>.  
Extract media: save images or sounds from the  
message into your phone.  
3. Press <Yes> to confirm the deletion.  
35  
       
Menu functions  
Add page: add a new page.  
Page timing: set the length of time the  
current page displays.  
Multimedia messages (Menu 5.2)  
Multimedia Message Service (MMS) delivers messages  
containing a combination of text, picture, and sound,  
from phone to phone or from phone to e-mail.  
Text effect: change the text attributes.  
Clear subject  
clear the added item.  
Delete page: delete the current page.  
Save message: save the message to Draft or  
My folder  
11.When you have finished, press <Opt.> and select  
Send  
12.Select an empty location.  
13.Select Number E-mail, or Phonebook  
/picture/sound/message:  
Create (Menu 5.2.1)  
You can create and send an MMS message.  
1. Press <Add> on the Subject line.  
2. Enter a message subject and press <OK>.  
3. Move to the Picture line and press <Add>.  
.
.
4. Select Create New and take a new photo, or  
select an image category and select an image  
item.  
,
.
5. Move to the Sound line and press <Add>.  
14.Enter a destination number or an e-mail address,  
or select a number from Phonebook.  
6. Select Record new and record a new sound, or  
select a sound category and select a sound clip.  
To enter additional destinations, repeat from step  
12.  
7. Move to the Message line and press <Add>.  
15.When you have finished, press <Send>.  
8. Enter the message text.  
9. Press <Opt.> and select Done  
10.Press <Opt.> to access the following options:  
Preview: check the message you created.  
.
36  
   
Move to My folder: move the message to My  
folder  
Inbox (Menu 5.2.2)  
.
This menu displays MMS messages that you have  
received. The following icons tell you the message  
status:  
When you select a notification, you can access  
Retrieve to retrieve the message from the MMS  
server.  
has been read  
has not been read  
Outbox (Menu 5.2.3)  
is being retrieved from the server  
Notification that you have not read  
Notification that you have read  
This menu displays MMS messages that you have  
sent. The following icons tell you the message status:  
currently being sent  
sent  
While viewing a message, press <Opt.> to access the  
following message options:  
your phone couldn’t send  
opened by the recipient  
Delete: delete the message.  
Replay: replay the message.  
While viewing a message, press <Opt.> to access the  
following options:  
Reply: reply to the sender.  
Forward: forward the message to another person.  
Call back: call the sender.  
Delete: delete the message.  
Replay: replay the message.  
Cut media: extract media items from the  
message.  
Send: send or resends the message.  
Properties: view the message properties.  
Move to My folder: move the message to My  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
folder  
.
Properties: view the message properties.  
37  
       
Menu functions  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Draft (Menu 5.2.4)  
After creating a multimedia message, you can store it  
in this message box for sending later. Messages  
interrupted while created are also saved in this  
message box.  
Properties: view the message properties.  
Delete all (Menu 5.2.6)  
Use this menu to delete all of the messages in each  
message box.  
While viewing a message, press <Opt.> to access the  
following options:  
1. Press <Select> to check the message boxes to be  
Send: send the message.  
cleared.  
Replay: replay the message.  
Delete: delete the message.  
Properties: view the message properties.  
2. Press <OK>.  
3. Press <Yes> to confirm the deletion.  
Push messages (Menu 5.3)  
My folder (Menu 5.2.5)  
Use this menu to access messages from the WAP  
server.  
In this menu, you access messages you have moved  
from Inbox or Outbox, or you have saved while  
creating. While viewing a message, press <Opt.> to  
access the following options:  
Inbox: display push messages you have received.  
Setting: determine whether or not your phone  
Delete: delete the message.  
Replay: replay the message.  
Send: send the message.  
receives push messages.  
Always: the phone receives all push messages.  
Never: the phone rejects push messages.  
Cut media: extract media items from the  
Optional: the phone receives only push messages  
message.  
from the service centre set in this option.  
38  
     
Delete all: delete all push messages.  
Broadcast (Menu 5.6)  
The Cell Broadcast service delivers short messages on  
various topics such as the weather or traffic.  
Preset messages (Menu 5.4)  
Use this menu to preset message templates to retrieve  
them when composing a new message.  
Use this menu to change the settings for the service  
and access broadcast messages.  
Read: open received messages.  
Voice mail (Menu 5.5)  
The Temporary box saves network messages until  
the phone is switched off.  
Use this menu to store the number of the voice mail  
server and access your voice mails.  
The Archive box saves network messages  
indefinitely. Press <Options> and select Save  
when a text notification appears. The message is  
saved in the Archive box.  
You must enter the voice server number before you  
can access your voice mails. Your service provider  
can give the voice server number.  
Receive: enable or disable the reception of  
broadcast messages.  
Connect to voice mail: connect to the voice  
server to allow you to listen to your messages. You  
can also connect to the voice mail server by  
Channel: specify the channels from which you  
receive broadcast messages.  
pressing and holding [1] in Idle mode.  
Voice server number: change the voice mail  
server name or number.  
Language: select the language in which broadcast  
messages display.  
Please contact your service provider for details.  
39  
     
Menu functions  
Character support: select a character encoding  
type. If you select Automatic, the phone switches  
the encoding type from GSM-alphabet to Unicode if  
you enter a Unicode character. Use of Unicode  
encoding will reduce the maximum number of  
characters in a message to about half.  
Settings (Menu 5.7)  
Use this menu to customise the settings required for  
sending and receiving messages.  
Short messages (Menu 5.7.1)  
Use this menu to customise the SMS settings.  
Multimedia messages (Menu 5.7.2)  
Use this menu to customise MMS settings.  
Send settings  
The setting options available in this menu may vary  
depending on your service provider.  
Service centre: store or changes the number of  
your message centre.  
Priority: set the priority level of your messages.  
Validity period: set the length of time your  
messages are stored in the message centre while  
the network attempts to deliver them.  
Validity period: set the length of time your  
messages are stored in the message centre.  
Delivery after: set the time delay before  
messages are sent.  
Message type: set the default message type.  
Reply path: allow the recipient to reply to you  
through your message centre.  
Address hiding: hide your phone number on the  
recipient’s phone.  
Delivery report: set the network to inform you  
when your message has been delivered.  
Delivery report: set the network inform to you  
when your message has been delivered.  
Read reply: request a reply from the recipient.  
40  
   
Receive settings  
Current profile: select a profile.  
Msg. reception: determine if your phone  
Profile setting: customise the following options  
retrieves new messages automatically:  
for each profile:  
Manual: the phone displays notifications. Use the  
Retrieve option to manually download new  
messages.  
Profile name: assign a name to the MMS profile.  
Server URL: enter the address of your MMS  
server.  
Automatic: the phone automatically retrieves  
messages from the server.  
GPRS setting: customise the settings required for  
connecting to the GPRS network.  
Reject: the phone rejects all messages.  
-
-
Gateway: enter the IP address and port number.  
Anonymous reject: reject messages from  
anonymous senders.  
APN: enter the access point name used for the  
address of the GPRS network.  
Adverts reject: reject advertisements.  
-
-
Login ID: enter the user ID.  
Report allowed: send a delivery report from the  
network to the sender.  
Password: enter the password.  
Memory status (Menu 5.8)  
MMS profiles  
Use this menu to view the total number of messages  
you can store and the number of messages you have  
stored on the SIM card and in the phone’s memory.  
You can configure required network settings for MMS.  
The last profile accessed is automatically activated for  
sending or receiving subsequent messages.  
Check with your service provider before you change  
any MMS settings on your phone.  
41  
 
Menu functions  
Navigating with the WAP browser  
Fun box (Menu 6)  
To  
Press  
[Up] or [Down].  
>.  
The Fun box menu allows you to use the WAP  
browser, play Java games, and access images and  
sounds stored in the phone’s memory.  
scroll through browser items  
select a browser item  
return to the previous page  
return to the homepage  
<
To access this menu, press <Menu> in Idle mode and  
select Fun box  
.
[C].  
[
] and select  
WWW services (Menu 6.1)  
Home  
.
The Wireless Application Protocol (WAP) browser on  
your phone allows you to access the wireless web.  
Using the WAP browser, you can access updated  
information and a wide variety of media content, such  
as wallpapers and ring tones.  
Selecting and using browser menu options  
1. Press <Menu> and Browser menu. Or select the  
on the top of the screen.  
2. Select one of the following browser options:  
Home (Menu 6.1.1)  
Back: go back to the previous page.  
Home: go back to the homepage.  
Exit: exit the WAP browser.  
Reload: reload the current page.  
Show URL: display the URL address of the  
current web page. You can also set the current  
page as the homepage for the WAP browser.  
About...: view version information for your  
WAP browser.  
Use this menu to connect your phone to the network  
and load the homepage of the wireless web service  
provider. You can also press [ ] in Idle mode.  
42  
   
Using WAP page options  
Using bookmark options  
From any WAP pages, press [ ] to access the following  
options:  
After saving an item, select it to access the following  
options:  
Goto URL: enter a URL address manually.  
Go: access the website.  
Bookmark: switch to the Bookmark menu.  
Edit: edit the address and name of the bookmark.  
Delete: delete the bookmark.  
Menu 6.1.2  
Messages: check the Inbox and Outbox boxes in  
the Short messages menu. You can also create  
Go to URL (Menu 6.1.3)  
Use this menu to manually enter the URL address of a  
website and access the website.  
and send a new SMS message.p. 34  
Media box: switch to the Media box menu.  
p.  
44  
Clear cache (Menu 6.1.4)  
Use this menu to clear the cache, which is the  
temporary memory that stores the web pages you  
have recently accessed.  
Bookmark (Menu 6.1.2)  
Use this menu to save URL addresses to quickly access  
a website.  
Adding a bookmark  
1. Select an empty location.  
2. Enter a URL address and press <OK>.  
3. Enter a name for the bookmark and press <OK>.  
43  
   
Menu functions  
Home URL: set the address of your homepage.  
Proxy settings (Menu 6.1.5)  
Bearer: select the bearer to be used for each type  
of network address accessed.  
Use this menu to set up servers for the WAP browser.  
Contact your service provider for details about your  
settings options.  
Current proxy (Menu 6.1.6)  
For each server, the following options are available:  
Use this menu to activate one of the proxy servers you  
have set up.  
Proxy name: assign a name to the server profile.  
GSM setting: customise the following GSM  
network settings:  
Media box (Menu 6.2)  
Gateway: enter the IP address and port number.  
Data call type: select a data call type.  
Dial number: enter the PPP sever phone number.  
Login ID: enter the user ID.  
Use this menu to access media items stored in the  
phone’s memory.  
Photos (Menu 6.2.1)  
Use this menu to access photos you have taken using  
your camera.p. 53  
Password: enter the password.  
GPRS setting: customise the following GPRS  
network settings:  
Images (Menu 6.2.2)  
This menu displays images downloaded from the  
wireless web or received in messages.  
Gateway: enter the IP address and port number.  
APN: enter the access point name of the GPRS  
network gateway.  
While accessing an image, press <Options> to access  
the following options:  
Login ID: enter the user ID.  
Send: send the image by MMS.  
Password: enter the password.  
Rename: change the name of the image.  
44  
     
Delete: delete the image.  
3. Press <OK>.  
Set as wallpaper: set the image as your  
wallpaper for the idle screen.  
4. Press <Yes> to confirm the deletion.  
Memory status (Menu 6.2.5)  
Properties: view the properties of the image.  
You can check the total amount of memory for media  
items and the amount of memory currently in use in  
each media box.  
Sounds (Menu 6.2.3)  
This menu displays sounds recorded, downloaded from  
the wireless web, or received in messages.  
JAVA world (Menu 6.3)  
While accessing a sound, press <Options> to access  
the following options:  
Use this menu to access and play Java games and to  
change the network settings for accessing Java  
services.  
Send: send the sound by MMS.  
Rename: change the name of the sound.  
Delete: delete the sound.  
Downloads (Menu 6.3.1)  
Use this menu to play a Java game.  
Set as ringtone: set the sound as your ring tone.  
Properties: view the properties of the sound.  
Playing a game  
1. Scroll the game you want on the game list and  
Delete all (Menu 6.2.4)  
press <Launch>.  
You can delete all of the downloaded items in the  
2. For SnowBallFight, press any key twice to go to  
Photos Images, and Sounds folders.  
,
the startup screen and press [ ] to start a game.  
1. Select a media type.  
For BubbleSmile, select START GAME  
.
2. Press <Select> to check the folder(s) to be  
Viewing game information  
cleared.  
45  
       
Menu functions  
Scroll to the game you want and press <Options>.  
To access this menu, press <Menu> in Idle mode and  
select Organiser  
And then select Properties  
.
.
Internet settings (Menu 6.3.2)  
New memo (Menu 7.1)  
Use this menu to set up the network settings required  
for accessing the Java server.  
Use this menu create a new memo.  
You can quickly access this menu by holding down  
APN: enter the access point name.  
Login ID: enter the user ID.  
[C] in Idle mode.  
Creating a new memo  
1. Enter the memo text and press <OK>.  
2. Select a memo type.  
Password: enter the password.  
DNS settings: enter the primary and second DNS  
addresses.  
3. Select a date from the calendar.  
Memory status (Menu 6.3.3)  
4. If you selected Call in step 2, enter a phone  
Use this menu to check the amount of memory  
currently being used and memory available for Java  
games.  
number and press <OK>.  
5. Enter the time for the memo and press <OK>.  
Your phone is preset to a 24-hour format. You  
Organiser (Menu 7)  
can change the time format.p. 48  
The Organiser feature enables you to keep track of  
your schedule and tasks and to make a voice memo.  
You can also set the time and date and use convenient  
features, such as alarms, calculator, converter, and  
stopwatch.  
6. Select AM or PM in 12-hour time format.  
7. Press <Yes> to set an alarm for the memo.  
8. Enter the time for the alarm to ring and press  
<OK>.  
46  
   
9. Select AM or PM in 12-hour time format.  
Selecting a date in the calendar  
Press [Left] or [Right] to move to another day.  
Press [Up] or [Down] to move to another week.  
10.Select an alarm melody. The memo is saved.  
Using memo options  
Press and hold [Up] or [Down] to move to another  
month.  
After the memo is saved, press <Options> to access  
the following options:  
Press and hold [Left] or [Right] to move to another  
year.  
Add: add a new memo.  
Delete: delete the current memo.  
Edit: edit the memo.  
Using the calendar options  
From the calendar, press <Options> to access the  
following options:  
Move: change the date of the memo.  
Copy: copy the memo to another date.  
Add memo: add a new memo to the selected  
date.  
Calendar (Menu 7.2)  
Go to date: enter the date you want to access.  
Use this menu to keep track of your monthly schedule.  
View all: access all memos.  
When you access this menu, the calendar displays  
with today’s date is highlighted and selected. On the  
bottom, the number of memos of each type appears.  
The following icons indicate the type of memo:  
Delete day: delete the memos stored for the  
currently selected date.  
Delete all: delete all memos.  
Creating memos and using memo options  
Scheduler  
To do list  
Call  
You can create memos and access memo options as  
you would in the New memo menu.  
Anniversary  
47  
   
Menu functions  
Set date: enter the current date.  
To do list (Menu 7.3)  
Set world time: set your local time zone and find  
out what time it is in another part of the world.  
Scroll to the time zone you want and press <Set  
to access the following options:  
This menu displays the list of To do list memos. The  
following icons tell you the status of memos.  
>
Done  
Undone  
Set local: set the time zone as your local time  
zone.  
While viewing a memo, press <Options> to access  
the following options:  
Set DST: apply the Daylight Savings Time to the  
Add: add a new To do list memo.  
Mark: change the status mark.  
Edit: edit the memo.  
time zone.  
Set format: set the time format and date format.  
Alarm (Menu 7.5)  
Move: change the date of the memo.  
Copy: copy the memo to another date.  
Delete: delete the memo.  
Use this menu to set alarms to ring at a specific time.  
Setting an alarm  
1. Select the type of alarm.  
Delete all: delete all To do list memo.  
2. Press <Options> to access the following options  
Clock (Menu 7.4)  
for setting the alarm:  
Use this menu to change the time and date displayed  
on your phone. Before setting the time and date,  
Alarm day: select the days of the week.  
Alarm time: enter the time for the alarm.  
Alarm tone: select an alarm melody.  
specify your time zone in Set world time  
.
Set time: enter the current time.  
3. Set each alarm options.  
48  
     
During recording,  
Stopping an alarm  
When the alarm sounds, press any key.  
Select  
Select  
to pause recording.  
to resume.  
When the morning call alarm sounds, press  
<
Confirm>.  
To snooze the alarm. press any key, except for  
Confirm>. The alarm will sound again after five  
3. When you have finished, select  
saved.  
. The memo is  
<
Voices (Menu 7.6.2)  
minutes.  
Use this menu to access the list of voice memos you  
have recorded. Select a voice memo to listen.  
To remove an alarm set, access it, press  
<Options> and select Remove alarm.  
During playback,  
Setting the alarm to ring even if the phone is  
off  
Select  
Select  
Select  
Select  
Select  
to pause.  
to resume.  
From the Alarm screen, select Autopower  
On.  
to move forward.  
to move backward.  
to stop.  
If the phone is off when it is time for the alarm to ring,  
the phone switches on and sounds the alarm.  
Voice recorder (Menu 7.6)  
Press [ / ] to adjust the volume.  
While viewing the voice memo list, press <Options  
to access the following options:  
>
Use this menu to record and play voice memos.  
Record (Menu 7.6.1)  
1. Press <Select> to start recording.  
2. Speak into the microphone.  
Send: send the voice memo by MMS.  
Rename: change the name of the voice memo.  
Delete: delete the voice memo.  
49  
     
Menu functions  
Properties: view the properties of the voice  
memo.  
4. Press <Equal> to view the result.  
Conversion (Menu 7.8)  
Delete all (Menu 7.6.3)  
Use this menu for common conversions, such as  
currency and temperature.  
Use this menu to delete all of the voice memos you  
have recorded at one time.  
1. Select the converter type you want.  
Settings (Menu 7.6.4)  
2. Enter the value to be converted and press [Down].  
Use this menu to change the recording time, volume  
and default name.  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature to above  
zero (+) or below zero (-).  
Memory status (Menu 7.6.5)  
You can check the total amount of memory and the  
amount of memory currently in use for voice memos.  
3. Press [Left] or [Right] to select the original unit  
and press [Down].  
4. Press [Left] or [Right] to select the unit you want  
to convert to.  
Calculator (Menu 7.7)  
Use this menu to perform basic arithmetic functions  
such as addition, subtraction, multiplication, and  
division.  
5. Press <OK> to view the result.  
Timer (Menu 7.9)  
1. Enter the first number.  
Use this menu to set a period of time for the phone to  
count down. The phone will sound an alarm when the  
specified period of time has expired.  
Press [ ] to insert a decimal point.  
2. Press [ ] to access the math function you want.  
3. Enter the second number.  
50  
     
Starting the timer  
1. Press <Set>.  
Camera (Menu 8)  
You can use the camera module embedded in your  
phone to take photos.  
2. Enter the length of time you want to count down  
and press <OK>.  
To access this menu, press <Menu> in Idle mode and  
select Camera, or press [Up].  
3. Press <Start> to start counting down.  
Stopping the timer  
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where cameras are  
not allowed.  
Press any key to stop the timer when it rings.  
Press <Stop> on the Timer screen to stop the  
timer before it rings.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
Stopwatch (Menu 7.10)  
Use this menu to measure elapsed time. The precision  
of the stopwatch is one one-hundredth of a second.  
The maximum measurement time is 10 hours.  
Take photos (Menu 8.1)  
The camera produces JPEG photos.  
1. Press <OK> to start the stopwatch.  
When you take a photo in direct sunlight or in bright  
conditions, shadows may appear on the photo.  
2. Press <OK> to check an interval. You can repeat  
this step for a total of 4 intervals.  
Taking a photo with the open phone  
1. Open the phone.  
2. Press and hold [ ]. The image to be captured  
appears on the display.  
51  
       
Menu functions  
3. Adjust the image by aiming the camera lens at the  
subject.  
Night mode: take a high quality photo in low  
lighting conditions.  
Press <  
p. 52  
Use the keypad to change the camera settings  
or switch to other modes. p. 53  
> to use the camera options.  
Capture only: set the phone to automatically  
return to Capture mode after saving a photo.  
Frame: apply a decorative frame.  
Effects: change the colour tone or apply a special  
effect to the photo.  
4. Press [ ] to take a photo. The photo is saved in  
the My photos folder.  
Rotation: flip the image vertically or view its  
mirror image.  
5. To  
use photo options  
Press  
Timer: set a time delay before the camera takes a  
photo.  
<Options>.p. 54  
Settings: change the default settings for taking a  
photo.  
delete the photo  
<Delete>.  
return to Capture mode  
[C].  
Photo size: select an image size.  
Photo quality: select an image quality.  
Using camera options in Capture mode  
Shutter sound: select the sound that you hear  
when you press the shutter, [ ].  
In Capture mode, press  
options:  
to access the following  
Default name: change the default prefix of the  
photo name.  
Mode: take a photo in the following modes:  
Normal shot: take a photo in the normal mode.  
Help: view the functions of the keys you can use.  
Multi-shot: take a series of action stills. Select  
the number of photos the camera will take.  
52  
 
Using the keypad in Capture mode  
Key  
7
Function  
You can use the keypad to customise your camera  
settings in Capture mode.  
Selects a decorative frame.  
Sets the timer.  
8
Key  
Function  
9
Shows the photos stored in the My Photos  
folder.  
Flips the image vertically.  
Shows the mirror image.  
Adjusts the brightness of the image.  
Taking a photo with the closed phone  
1. Close the phone.  
Left/  
Right  
2. Press and hold [ ]. The service LED is turned on.  
Up/  
Down  
Zooms in or out.  
3. Press [ ] to take a photo. The photo is saved in  
the My photos folder.  
1
2
3
4
5
Changes the size of the preview screen.  
Changes the image size.  
To review the photo, open the phone.  
My photos (Menu 8.2)  
Changes the image quality.  
Changes the camera mode.  
Use this menu to access a list of photos you have  
taken.  
Changes the colour tone or applies a special  
effect to the photo.  
Viewing the photos  
1. Scroll to a photo and press <View>.  
2. To go back to the photo list, press <Multi>.  
6
Reduces the distortion on the image to  
maximise detail and sharpness.  
53  
       
Menu functions  
Using photos options  
Delete all (Menu 8.4)  
Press <Options> to access the following options:  
Use this menu to delete all photos at one time.  
Available options vary depending on whether you  
are looking at the photo list or viewing a photo.  
1. Press <Select> to check the photo categories to  
be cleared.  
2. Press <OK>.  
Send: send the photo via MMS.  
Rename: change the name of the photo.  
Delete: delete the photo.  
3. Press <Yes> to confirm the deletion.  
Settings (Menu 8.5)  
Move to album: move the photo to another photo  
folder.  
Use this menu to change the default settings for the  
camera.  
Set as: set the photo as your wallpaper or as a  
caller ID image for a Phonebook entry.  
Photo size: select an image size.  
Photo quality: select an image quality.  
Protection: protect the photo from being deleted.  
Shutter sound: select the sound that you hear  
when you press the shutter, [ ].  
Properties: view the properties of the photo.  
Default name: change the default prefix of the  
photo name.  
My albums (Menu 8.3)  
Use this folder to save your photos in separate photo  
albums.  
Memory status (Menu 8.6)  
You can view photos and use options the same way in  
the My photos menu.  
Use this menu to check the amount of memory  
currently being used and memory available for the  
camera.  
54  
               
Text style: select a text style.  
Phone settings (Menu 9)  
The Phone settings menu allows you to customise  
various settings for your phone. You can also reset the  
settings to their default values.  
Skin (Menu 9.1.2)  
You can select a skin colour pattern for Menu mode.  
Back light (Menu 9.1.3)  
To access this menu, press <Menu> in Idle mode and  
You can select the length of time the backlight stays  
on.  
select Phone settings  
.
Display (Menu 9.1)  
LCD contrast (Menu 9.1.4)  
You can adjust the brightness of the display for  
varying lighting conditions.  
Use this menu to change settings for the display and  
light.  
Service light (Menu 9.1.5)  
Wallpaper (Menu 9.1.1)  
You can select whether or not the service light is used.  
You can change the background image and the  
settings for the text of Idle mode.  
Greeting message (Menu 9.2)  
Animations: select one of animated images.  
Use this menu to enter the greeting that is displayed  
briefly when the phone is switched on.  
Photos: select one of photos you have taken.  
Images: select one of images downloaded from  
the wireless web or Samsung PC Studio, or  
received by MMS.  
Language (Menu 9.3)  
Use this menu to select one of several languages for  
the display text and input mode, separately.  
Text position: select a position of the text  
displayed on the Idle screen.  
55  
                 
Menu functions  
When this feature is enabled, you must enter a 4- to  
8-digit phone password each time the phone is  
switched on.  
Security (Menu 9.4)  
Use this menu to protect the phone against  
unauthorised use by managing the several access  
codes of your phone and SIM card.  
The password is preset to 00000000. To change the  
password, use the Change password menu.  
If you enter an incorrect PIN /PIN 2 three times in  
succession, the SIM card is blocked. To unblock it  
you need to enter your PUK/PUK2 (Personal  
Unblocking Key). The codes are supplied by your  
network operator.  
Change Password (Menu 9.4.4)  
Use this menu to change your phone password. The  
password is preset to 00000000  
.
Privacy (Menu 9.4.5)  
PIN check (Menu 9.4.1)  
Use this menu to lock your media contents, including  
MMS messages, voice memos, images, and sounds.  
The 4-to 8-digit PIN (Personal Identification Number)  
protects your SIM card against unauthorised use.  
When this feature is enabled, the phone requires your  
PIN each time it is switched on.  
1. Press <Select> to check the item(s) to be locked.  
2. Press <OK> to lock the marked items.  
3. Enter the phone password and press <OK>.  
Change PIN (Menu 9.4.2)  
To access a locked item, you need to enter the phone  
password.  
Use this menu to change your PIN. The PIN Check  
feature must be enabled to use this feature.  
SIM lock (Menu 9.4.6)  
Phone lock (Menu 9.4.3)  
The SIM lock feature allows your phone to work only  
with the current SIM by assigning a SIM lock code. You  
The Phone lock feature locks the phone from  
unauthorised use.  
56  
               
must enter the SIM lock code to use a different SIM  
card.  
phone can hear you clearly even if you are in a noisy  
place.  
FDN mode (Menu 9.4.7)  
Active folder (Menu 9.7)  
If supported by your SIM card, Fixed Dialing Number  
(FDN) mode restricts your outgoing calls to a limited  
set of phone numbers. When this feature is enabled,  
you can make calls only to phone numbers stored in  
Phonebook. To use this feature, you must enter your  
PIN2.  
Use this menu to set whether to answer incoming calls  
by opening the phone.  
Side key (Menu 9.8)  
Use this menu to set how the Volume keys act when a  
call comes in.  
Change PIN2 (Menu 9.4.8)  
Reject: you can reject calls by holding down the  
keys.  
If supported by your SIM card, the Change PIN2  
feature changes your current PIN2.  
Silence: you can mute the ringer by holding down  
the keys.  
Auto redial (Menu 9.5)  
Use this menu to set the phone to make up to ten  
attempts to redial a phone number after an  
unsuccessful call.  
Anykey answer (Menu 9.9)  
Use this menu to set whether to answer incoming calls  
by pressing any keys, except [  
].  
Voiceclarity (Menu 9.6)  
Use this menu to remove extraneous noise and  
increase call quality to allow the other person on the  
57  
                         
Reset settings (Menu 9.10)  
Solve problems  
To save the time and expense of an unnecessary service  
call, perform the simple checks in this section before  
contacting a service professional.  
Use this menu to reset the phone to its default  
settings.  
1. Select a setting category.  
2. Press <Yes> to confirm the reset.  
3. Enter the 4- to 8-digit phone password and press  
When you switch on your phone, the following  
messages may appear:  
<
OK>.  
The password is preset to 00000000. You can  
change this password. p. 56  
“Insert SIM”  
Be sure that the SIM card is correctly installed.  
“Phone lock Enter password”  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
“Enter PIN”  
You are using your phone for the first time. You  
must enter the PIN supplied with the SIM card.  
The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu.  
58  
       
“Enter PUK”  
The PIN code has been entered incorrectly three  
Your correspondent cannot reach you  
Be sure your phone is switched on. ([  
for more than one second.)  
] pressed  
times in succession, and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
Be sure you are accessing the correct cellular  
network.  
“No service,” “Network failure,” or “Not done”  
displays  
Be sure that you have not set an outgoing call  
barring option.  
The network connection has been lost. You may be  
in a weak signal area. Move and try again.  
Your correspondent cannot hear you speaking  
You are trying to access an option for which you  
have no subscription with your service provider.  
Contact the service provider for further details.  
Be sure you have switched off the microphone.  
Be sure you are holding the phone close enough to  
your mouth. The microphone is located at the  
bottom of the phone.  
You have entered a number but it was not  
dialled  
The phone starts beeping and “Battery low”  
flashes on the display  
Be sure that you have pressed [ ].  
Be sure you have accessed the right cellular  
network.  
Your battery is insufficiently charged. Recharge the  
battery.  
Be sure that you have not set an outgoing call  
barring option.  
The audio quality of the call is poor  
Check the signal strength indicator on the display  
). The number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
(
59  
Try moving the phone slightly or moving closer to a  
window if you are in a building.  
Health and safety information  
SAR certification information  
No number is dialled when you re-call a  
Phonebook entry  
This phone meets European Union (EU) requirements  
concerning exposure to radio waves.  
Use the Phonebook Search feature to ensure the  
number has been stored correctly.  
Your mobile phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed the limits for  
exposure to radio-frequency (RF) energy, as  
Re-store the number, if necessary.  
If the above guidelines do not help you to  
solve the problem, take note of:  
recommended by the EU Council. These limits are part of  
comprehensive guidelines and establish permitted levels  
of RF energy for the general population. The guidelines  
were developed by independent scientific organisations  
through the periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety margin  
designed to ensure the safety of all persons, regardless of  
age and health.  
The model and serial numbers of your phone  
Your warranty details  
A clear description of the problem  
Then contact your local dealer or Samsung after-sales  
service.  
The exposure standard for mobile phones employs a unit  
of measurement known as Specific Absorption Rate (SAR).  
The SAR limit recommended by the EU Council is 2.0W/  
kg.*  
The highest SAR value for this model phone was  
0.795W/kg.  
60  
     
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest certified  
power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is  
because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach  
the network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Precautions when using batteries  
Never use a charger or battery that is damaged in any  
way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station,  
it uses less power. Talk and standby time are greatly  
affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Battery charging time depends on the remaining  
battery charge, the type of battery, and the charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out. When  
the operation time is noticeably shorter than normal, it  
is time to buy a new battery.  
Before a new model phone is available for sale to the  
public, compliance with the European R&TTE Directive  
must be shown. This directive includes as one of its  
essential requirements the protection of the health and  
safety of the user and any other person.  
If left unused, a fully charged battery will discharge  
itself over time.  
Use only Samsung-approved batteries, and recharge  
your battery only with Samsung-approved chargers.  
Disconnect the charger from the power source when it  
is not in use. Do not leave the battery connected to a  
charger for more than a week, since overcharging may  
shorten its life.  
*
The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body tis-  
sue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary,  
depending on national reporting requirements and the network  
band.  
61  
 
Health and safety information  
Extreme temperatures will affect the charging capacity  
of your battery: it may require cooling or warming  
first.  
Do not leave the battery in hot or cold places because  
the capacity and lifetime of the battery will be  
reduced. Try to keep the battery at room temperature.  
A phone with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Li-  
ion batteries are particularly affected by temperatures  
below 0°C (32°F).  
Road safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone while driving, follow local  
regulations in the country or region you are in.  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object like a coin,  
clip or pen causes a direct connection between the +  
and – terminals of the battery (metal strips on the  
battery). For example, do not carry a spare battery in  
a pocket or bag where the battery may contact metal  
objects. Short-circuiting the terminals may damage  
the battery or the object causing the short-circuiting.  
Operating environment  
Remember to follow any special regulations in force in the  
area you are in, and always switch off your phone  
whenever it is forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any accessory to another  
device, read its user’s guide for detailed safety  
instructions. Do not connect incompatible products.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
As with other mobile radio transmitting equipment, users  
are advised that for the satisfactory operation of the  
equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in  
the normal operating position (held to your ear with the  
antenna pointing over your shoulder).  
62  
 
Other medical devices  
Electronic devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Your physician may be able to assist you in obtaining this  
information.  
Switch off your phone in health care facilities when  
regulations posted in these areas instruct you to do so.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations  
are consistent with the independent research and  
recommendations of Wireless Technology Research. If you  
have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with  
the manufacturer or its representative regarding your  
vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Hearing aids  
Posted facilities  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Switch off your phone in any facility where posted notices  
require you to do so.  
63  
Health and safety information  
Potentially explosive environments  
Emergency calls  
Switch off your phone when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
This phone, like any wireless phone, operates using radio  
signals, wireless, and landline networks as well as user-  
programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations are  
in progress.  
communications like medical emergencies.  
To make or receive calls, the phone must be switched on  
and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include the areas  
below decks on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas, such as  
propane or butane, areas where the air contains chemicals  
or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
3. Press [ ].  
Certain features like Call Barring may need to be  
deactivated before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
64  
 
Other important safety information  
Care and maintenance  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including installed or portable wireless  
equipment, in the area over the air bag or in the air  
bag deployment area. Improperly installed wireless  
equipment could result in serious injury if the air bag  
inflates.  
Switch off your phone before boarding an aircraft. It is  
dangerous and illegal to use wireless phones in an  
aircraft because they can interfere with the operation  
of the aircraft.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of  
the reach of small children.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
Do not use the phone with a wet hand. Doing so may  
cause an electric shock to you or damage to the  
phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone  
warms up to its normal operating temperature,  
moisture can form inside the phone, which may  
damage the phone’s electronic circuit boards.  
65  
 
Health and safety information  
Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device’s  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as  
a microwave oven, stove, or radiator. The phone may  
explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you, and  
if necessary, arrange for service.  
66  
delete • 29  
dialled • 29  
missed • 29  
received • 29  
SMS messages • 35  
Delivery reports, message • 40  
Dialled calls • 29  
Display  
layout • 10  
settings • 55  
DTMF tones, send • 24  
Internet • 42  
Index  
A
ABC mode, text input • 18  
Active folder • 57  
Alarm • 48  
Alerts 34  
Alet on call • 34  
Answering  
J
Java world • 45  
Call time • 29  
Caller ID • 32  
Calls  
K
Key tones  
sending • 23  
setting • 33  
Keys • 9  
answering • 21  
E
barring • 31  
diverting • 30  
holding • 22  
making • 20  
redialling • 20  
rejecting • 21  
waiting • 31  
Emergency calls • 64  
call • 21  
L
second call • 23  
Any key answer • 57  
Auto redial • 57  
F
Language, select • 55  
Last number, redial • 20  
Locking  
FDN (Fixed Dial Number) mode  
• 57  
Fun box • 42  
B
SIM card • 56  
Loudspeaker • 23  
Low battery indicator • 8  
Backlight time, set • 55  
Band selection • 32  
Barring, calls • 30, 31  
Battery  
G
Camera • 51  
CB (Cell Broadcast) messages •  
39  
Characters, enter • 18  
Connection tone • 33  
Conversion • 50  
Games • 45  
Greeting message • 55  
M
H
Media box • 44  
Memory status  
camera • 54  
charging • 7  
Holding, call • 22  
low indicator • 8  
precautions • 61  
Broadcast messages • 39  
Browser, WAP • 42  
I
downloaded items • 45  
messages • 41  
phonebook 28  
Message tone • 33  
Messages  
D
Icons, description • 10  
Images, downloaded • 44  
Inbox, messages  
MMS • 37  
Deleting  
call records • 29  
memos • 47  
MMS messages • 38  
phonebook • 26, 27  
photos • 54  
C
Calculator • 50  
Call costs • 30  
Call records  
SMS • 35  
International calls • 20  
cell broadcast • 39  
greeting • 55  
67  
 
Index  
MMS • 36  
SMS • 34  
voice • 39  
SMS • 35  
Own number • 28  
locking • 56  
PIN2, change • 57  
Power on/off tone • 33  
Privacy • 56  
MMS • 37  
SMS • 35  
SIM card  
inserting • 7  
locking • 56  
SMS messages  
P
web • 38  
Password  
Minute minder • 34  
Missed calls • 29  
MMS messages  
Push messages • 38  
call barring • 31  
phone • 56  
Phone  
Q
creating/sending • 34  
deleting • 35  
viewing • 35  
Quiet mode • 12, 34  
creating/sending • 36  
deleting • 37  
viewing • 37  
care and maintenance •  
65  
display • 10  
icons • 10  
R
Sound settings • 33  
Received calls • 29  
Received messages  
MMS • 37  
Multi-party calls • 24  
Muting  
Sounds, downloaded • 45  
Speed-dial • 27  
Stopwatch • 51  
Switching on/off  
microphone • 23  
phone • 8  
keys • 9  
key tones • 23  
microphone • 23  
SMS • 35  
Recording  
resetting • 58  
switching on/off • 8  
unpacking • 6  
call conversation • 22  
voice memos • 49  
Redialling  
automatically • 57  
manually • 20  
Resetting phone • 58  
Road safety • 62  
N
Names  
Phonebook  
T
entering • 18  
searching • 25  
Network selection • 32  
Network services • 30  
Number  
copying • 26  
deleting • 27  
editing • 26  
options • 26  
speed-dialling • 27  
T9 mode, text input • 19  
Text input mode, change • 18  
Text, enter • 18  
Timer • 50  
searching/dialling • 25  
storing • 26  
Photos  
Tone  
S
deleting • 54  
taking • 51  
viewing • 53  
call ringer • 33  
connection • 33  
keypad • 33  
message • 33  
power on/off • 33  
Safety  
information • 60  
precautions • 1  
Security, calls • 56  
Sent messages  
O
Organiser • 46  
Outbox, messages  
MMS • 37  
PIN  
changing • 56  
68  
V
Voice clarity • 23, 57  
Voice mail • 39  
Voice memos  
playing • 49  
recording • 49  
Voicemail server • 39  
W
Waiting call • 31  
WAP browser  
access • 42  
bookmarks • 43  
cache, clear • 43  
World time • 48  
69  
M

Lifebreath 155ecm User Manual
Olivetti 450 User Manual
Philips Lr03px24c User Manual
Radio Shack 23 420 User Manual
Sanyo 18xls72 User Manual
Schumacher Ps 2100ma User Manual
Sharp Ar 275 User Manual
Siemens Bacnet 125 5037 User Manual
Spt Wa 1300h User Manual
Trane Air Conditioner Tam7b0c60h51sa User Manual