OWNER'S
INSTRUCTIONS
AW0593L
AW0693L
AW0893L
AW1093L
AW1293L
AW1893L
Window-type Room Air Conditioner
(Cool)
E
S
DB98-15117A
Contents
PREPARING YOUR AIR CONDITIONER
Safety Precautions
2
4
5
6
7
Description of Each Component
Remote Control - Buttons and display
Getting Started
Inserting the Remote Control Batteries
USING THE CONTROL PANEL ON THE UNIT
OPERATING YOUR AIR CONDITIONER
Cooling Your Room
Airing Your Room
Removing Excess Humidity
9
10
11
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer
Setting the Off Timer
Setting the Sleep Timer
Selecting Energy Saving mode
12
13
14
15
USING THE WIRELESS REMOTE CONTROL
OPERATING YOUR AIR CONDITIONER
Cooling Your Room
Airing Your Room
Removing Excess Humidity
17
18
19
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer
Setting the Off Timer
Setting the Sleep Timer
Selecting Energy Saving mode
Adjusting the Air Flow Direction Horizontally
Adjusting the Air Flow Direction Vertically
20
21
22
23
24
24
RECOMMENDATIONS FOR USE
Temperature and Humidity Ranges
Cleaning Your Air Conditioner
Solving Common Problems
Technical Specifications
25
26
27
27
E-3
Description of Each Component
The design and shape are subject to
change.
Air inlet(outside)
Outer air flow blades
(up/down orientation)
- Except AW0593L
Inner air flow
blades (right/left
orientation)
Air outlet
Ventilation lever
- Except AW0593L
Air inlet (Inside)
Air inlet (Outside)
Air filter (Inside)
Power plug
(The type of power plug
may differ, depending on
the local power supply.)
Temperature/Timer/Fan Speed
Display
Cooling indicater
Dry indicater
Fan indicater
Mode
Mode selection button
(Cool,Fan, Dry)
Cool/Dry/Fan
Energy indicater
Sleep indicater
Timer indicater
Temp.
Power
Energy Saver button
Sleep timer setting button
Timer setting button
E.Saver
Sleep
Timer
Temperature adjustment
buttons
On/Off button
Fan Speed
Fan speed adjustment button Remote control sensor
E-4
Remote Control - Buttons and display
Remote control
transmission indicator
Mode selection button
(Cool,Fan, Dry)
Operating mode
(
Cool, Dry, Fan)
Temperature adjustment
buttons
Temperature setting
Sleep mode
Sleep timer setting button
Energy Saving mode
Fan speed adjustment
button
Fan speed
Energy Saving button
On Timer setting
Off Timer setting
Timer setting button
Timer Set/Cancel button
On/Off button
Battery discharge indicator
E-5
Getting Started
You have just purchased a Samsung window-type room air condotioner which should be installed
following your installation manual.
Your Owner's Instructins contain much valuable information on using your air conditioner.
Please tade the tine to read then as they will help you take full advantage of the unit's feaatures.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
-
-
Description of Each Component
Remote control(buttons&display)
They will help you find the buttons and understand the symbols dispalyed.
In the main part of the document, you will find a series of step-by-step pricedures for
each function available.
The illustrationsin the step-by-step procedures use foru different symbols:
PRESS
PUSH
IMPORTANT
NOTE
E-
6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
You purchase the air conditioner
The remote control does not work correctly
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E-7
Using the
Control Panel
on the Unit
This chapter indicates how to operate and program
your air conditioner with the control panel on the unit.
E-8
Cooling Your Room
You must select the Cool mode if you wish to lower the temperature
in your room. You can also set the Fan speed.
Control Panel
Press the
Result:
(On/Off) button.
The air conditioner starts up in the cool mode.
The unit beeps twice.
1
Power
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
Plugged in
Stopped
It will start up normally after three minutes.
If the temperature is not displayed on the control panel:
2
Mode
Cool/Dry/Fan
Press the
button on the unit one or more times until the
temperature is displayed.
Mode
Cool/Dry/Fan
Result:
The unit beeps each time you press the
button.
The air conditioner starts up in the Cool mode.
You can chang modes at any time.
3
To adjust the temperature, press the
or more times until the desired temperature is displayed.
The temperature can be set between 64 Fand 86 F.
or
buttons on the unit one
Result:
Each time you press the
or
buttons:
-The temperature is adjusted by 1 F and displayed on
the control panel
-The unit beeps
The air conditioner starts cooling, if the room temperature is
higher than the selected temperature.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
To set the fan speed:
4
5
Fan Speed
Press the
button on the unit one or more times until the
desired the Fan speed(F1, F2 or F3) is displayed.
F1:Low
F2:Medium
F1:High
To control the direction of the air flow, refer to page 24.
E-9
AiringYourRoom
If you want to provide air circulation without cooling, you can use
the Fan mode.
Control Panel
If necessary, press the
(On/Off) button.
1
Result:
The air conditioner starts up in the cool mode.
The unit beeps twice.
Power
2
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Mode
Cool/Dry/Fan
Press the
(F1, F2 or F3) is displayed.
button on the unit one or more times until the fan speed
Mode
Cool/Dry/Fan
The unit beeps each time you press the
The air conditioner starts up in the Fan mode.
button.
Result:
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
F1:Low
F2:Medium
F1:High
3
To set the fan speed:
Fan Speed
Press the button on the unit one or more time until the
desired fan speed(F1, F2 or F3) is displayed.
F1:Low
F2:Medium
F1:High
To control the direction of the air flow, refer to page 24.
4
E-10
Removing Excess Humidity
If the atmosphere in your room is very humid or damp,you can remove
excess humidity without lowering the room temperature too much.
Control Panel
1
If necessary, press the
(On/Off) button.
Power
Result:
The air conditioner starts up in the Cool mode.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
If the temperature is not displayed on the control panel:
2
press the
temperature is displayed.
Result:
button the unit one or more times until the
The unit beeps each time you press the
button.
The air conditioner starts up in the cool mode.
You can change modes at any time.
To adjust the temperature, press the
more times until the required temperature is displayed.
or
buttons one or
3
Possible temperatures are between 64 F and 86 F inclusive.
Result:
Each time you press the
or
buttons:
- The temperature is adjusted by 1 F
- The unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
To control the direction of the air flow, refer to page 24.
4
E-11
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a
given time, You can select the On Timer only when the air conditioner is off. You
can select the On timer when the air conditioner operates in the Cool or Dry mode.
Check that the air conditioner has been switched off; if necessary,
press the
1
(On/Off) button.
Timer
2
Set the operating time by pressing the
button on the unit one or
more times until the desired time is displayed. The operating time can be
set between 1 and 24 hours.
Timer
Result:
Each time you press the
buton:
- The time is adjust by 1 hour and displayed on the control
panel
- The unit beeps
The operating time is displayed and decreases automatically to
indicate the remaining time.
The air conditioner starts up in the Cool mode automatically
when the operating time reaches zero.
You can select the fan speed, temperature and Energy saving mode
after setting the On timer and Off timer mode. However, when you
change the mode, the On timer and Off timer mode is cancelled.
To Cancel the On Timer
Timer
To cancel the timer, press the
until "--" is displayed.
button on the unit one or more times
1
2
Press the
(On/Off) button on the unit.
E-
12
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically after a
given time. You can select the On timer only when the air conditioner is on. You
can select the Off timer when the air conditioner operates in the Cool or Dry mode.
Control Panel
1
Check that the air conditioner has been switched on; if necessary,
press the (On/Off) button.
Power
Timer
2
Set the operating time by pressing the
button on the unit one or
more times until the desired time is displayed. The operating time can be
set between 1 and 24 hours.
Timer
Result:
Each time you press the
button:
- The time is adjusted by 1 hour and displayed on the control
panel
- The unit beeps
The operating time is displayed and decreases automatically to
indicate the remaining time.
The air conditioner switches off automatically when the
operating time reaches zero.
You can select the fan speed, temperature and Energy saving mode
after setting the On timer and Off timer mode. However, when you
change the mode, the On timer and Off timer mode is cancelled.
To Cancel the Off Timer
Timer
To cancel the timer, press the
times until "--" is displayed.
button on the unit one or more
1
2
Press the (On/Off) button on the unit.
E-13
Setting the Sleep Timer
The Sleep Timer can be used when your are cooling your room to switch
the air conditioner off automatically after 8 hours.
Control Panel
If you wish to switch the unit off at a specific time, refer to page 13.
1
Make sure that you have selected the Cool mode.
Power
2
Press the
Result:
button on the unit.
Each time you press a button, the unit beeps.
The " " will be displayed.
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below
.
Cooling When the temperature has
been increased by 2 F
(after 1 hour), it is maintained
for 7 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
The
button on the unit.
Result:
The unit beeps.
The SLEEP indicator is no longer displayed.
The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start
up in the Energy Saving mode.
E-14
Selecting Energy Saving Mode
If the wish to save energy when using your air conditioner,
select the energy saving mode.
Control Panel
1
To select the energy saving mode, press the button on the unit one
or more times until the Energy Saver indicator lights up.
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in the Dry mode, do not
button.You cannot use the Dry mode in the energy
press the
saving mode.
Control Panel
2
To stop the energy saving mode, press the the
on the unit again.
button
Result:
The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving Mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
E-15
Using the
Wireless
Remote
Control
This chapter indicates how to operate and program
your air conditioner with the wireless remote control.
E-16
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
Cooling temperature
Fan speed when cooling
1
If necessary, press the
(On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the is not displayed at the top of the remote control,
press the
appears.
button on the remote control one or more times until it
Result:
The unit beeps each time you press the
The air conditioner runs in the Cool mode.
button.
You can change modes at any time.
3
To adjust the temperature, press the buttons one or more times
until the required temperature is displayed.
Possible temperatures are between 64 F and 86 F inclusive.
Result: Each time you press the buttons:
- The temperature is adjusted by 1 F
- The unit beeps
The air conditioner starts cooling, if the room temperature
is higher than the selected temperature.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Low
Medium
High
Result:
Each time you press the
button, the unit beeps.
5
To control the direction of the air flow, refer to page 24.
E-17
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
(On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps.
2
If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:
The unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
button.
You can change modes at any time.
3
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Low
Medium
High
Result: Each time you press the
button, the unit beeps.
4
To control the direction of the air flow, refer to page 24.
E-18
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
(On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
Result:
The unit beeps each time you press the
The air conditioner runs in the Dry mode.
button.
You can change modes at any time.
3
To adjust the temperature, press the
buttons one or more times
until the required temperature is displayed.
Possible temperatures are between 64 F and 86 F inclusive.
Result: Each time you press the buttons:
- The temperature is adjusted by 1 F
- The unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 24.
E-19
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically after a
given time.You can select the On timer only when the air conditioner is off. You
can select the On timer when the air conditioner operates in the Cool or Dry mode.
Timer
button one or more times until
1
To set the operating time, press the
the required time is displayed. Possible time is between 1 hour and
24 hours inclusive.
2
Press the
Result:
(Set/Cancel) button to complete the setting.
The remaining time is displayed.
Blinking of the timer indicator stops.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On timer setting.
You can select the fan speed, temperature and Energy saving mode
after setting the On timer and Off timer mode. However, when you
change the mode, the On timer and Off timer mode is cancelled.
To Cancel the On Timer
1
To cancel the On Timer, press the
until the timer setting disappears.
button one or more times
2
Press the
(Set/Cancel) button.
If you want to turn on the air conditioner before the timer reaches
the setting time, press the (On/Off) button.
E-20
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically after a
given time.You can select the On timer only when the air conditioner is off. You
can select the Off timer when the air conditioner operates in the Cool or Dry mode.
Timer
button one or more times until
1
To set the operating time, press the
the required time is displayed. Possible time is between 1 hour and
24 hours inclusive.
2
Press the
Result:
(Set/Cancel) button to complete the setting.
The remaining time is displayed.
Blinking of the timer indicator stops.
The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off timer setting.
You can select the fan speed, temperature and Energy saving mode
after setting the On timer and Off timer mode. However, when you
change the mode, the On timer and Off timer mode is cancelled.
To Cancel the Off Timer
Timer
button one or more times
1
To cancel the Off Timer, press the
until the timer setting disappears.
2
Press the
(Set/Cancel) button.
If you want to turn off the air conditioner before the timer reaches
the setting time, press the (On/Off) button.
E-21
Setting the Sleep Timer
The Sleep Timer can be used when you are cooling to switch the air
conditioner off automatically after a period of 8 hours.
If you wish to switch the unit off at a specific time, refer to
page 21.
1
2
Make sure that you have selected the Cool mode.
Press the
Result:
button on the remote control.
Each time you press a button, the unit beeps.
The
indicator is displayed.
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustrations below.
Cooling When the temperature has
been increased by 2 F
(after 1 hour), it is maintained
for 7 hours.
To Cancel the Sleep Timer
To cancel the timer press:
The
button on the remote control.
Result:
The unit beeps.
The indicator is no longer displayed.
The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start
up in the Energy Saving mode.
E-22
Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner,
select the energy saving mode.
To select the energy saving mode, press the
button on the remote
1
control one or more times until the Energy Saving indicator lights up.
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in Dry mode, do not press
the
button. You cannot use the Dry mode in the Energy Saving
mode.
2
To stop the energy saving mode, press the
control again.
button on the remote
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
E-23
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room, you can adjust
the orientation of the inner air flow blades on the unit.
Adjust the air flow blades to the desired position by pushing them side to side.
Adjusting the Air Flow Direction Vertically
The outer air flow blades can be adjusted to control the vertical air
flow direction. (Except AW0593L)
RECOMMENDA
When...
Adjust the blades to face...
Cooling
Upwards.
Adjust the air flow blades to the desired position, by pushing them
upwards or downwards.
If you orient the air flow blades downwards and the unit operates
in Cool mode for long periods of time, dew may:
-
-
Form on the surface of the blades
Drip from the blades
E-24
Temperature and Humidity R anges
The following table indicates the temperature and humidity ranges
within which the air conditioner can be used.
Mode
Indoor Temperature
70 F to 90 F approx.
Outdoor Temperature
70 F to 110 F approx.
Indoor Humidity
80% or less
C ooling
If the air conditioner is us ed at... Then...
Higher temperature
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperature
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher humidity levels
Water may condense on and drip from the surface of the unit
if it is used for long periods.
E -25
CleaningYour Conditioner
Be sure to clean the air filter periodically to maintain the air conditioner
in the best condition for a long period of time.
When cleaning the air conditioner,turn it off and pull out the
power pulg.
Open the front grille by pulling the tabs on both sides of the grille.
Then lift it up slightly to open the front grille completely.
1
2
3
Grab the tabs on the filter and pull it up and out.
Remove all dust on the air filter with a vacuum cleaner or brush.
4
5
When you have finished,insert the air filter back into its original position.
Wipe the surface of the unit with a neutral detergent
and then wipe it again with dry cloth.
(Be sure not to use benzene,solvent or other chemical products.)
If you...
Then...
Will not be using the
air conditioner for a
long period of time
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Switch the air conditioner off and
unplug it from the wall socket.
Clean the filter and outer surfaces.
Have not used the air
conditioner for a long
period of time
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
E-26
Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation / Solution
Check that the circuit breaker used for the air conditioner has not been
triggered.
The air conditioner does
not operate at all
Check that the power cable is plugged inot a wall socket and the socket is
switched on, if necessary.
Check that the temperature indicator on the unit is lit; if necessary,
press the
(On/Off) button on the remote control or unit.
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
The air conditioner does not
operate with the remote
control
Check that you are pointing the remote control at the remote control sensor
on the unit.
No beep is heard when you
press the
(On/Off) button
Replace the remote control batteries if necessary.
on the remote control
Check that the correct operating mode has been selected(Cool).
The room temperature may be too low.
The air conditioner does not
cool
Dust may be blocking the air filter; refer to page 26 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
Check that the timer has been programmed correctly;
refer to page 12~14,20~22.
The timer is not correctly
triggered
Odors are permeating the
room during air conditioning
Ventilate the room.
Technical Specifications
Design and specifications are subject to change without notice.
Model
Power Supply
AW0593L
AW0693L
AW0893L
AW1093L
AW1293L
AW1893L
115V~, 60Hz
230-208V~, 60Hz
E-27
SAMSUNG ROOM AIR CONDITIONER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG
against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor, Five (5) Years Parts Warranty for Compressor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States.Warranty repairs must be performed by SAMSUNG's authorized service center.To receive warranty service, the original
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.
SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned parts
during the limited warranty period specified above.To request warranty service, the purchaser must contact SAMSUNG for
problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and
products assume the remaining original warranty, or ninety(90) days,whichever is longer.
In - Home Service (Except AW0593L):
During the warranty labor period, in-home service will be provided subject to availability within the contiguous United States.
In-home service is not available in all areas. If during in-home service repair can not be completed, it may be necessary to remove,
repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to provide for transportation of
our choice to and from a SAMSUNG authorized service center. Otherwise, transportation to and from the SAMSUNG authorized
service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of
this product and shall not apply to the following, including, but not limited to: delivery and installation; damage which occurs in
shipment; applications and uses for which this product was not intended; failures or problems which are caused by products or
equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of
nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; product alteration or
modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to
follow operating and environmental instructions that are covered and prescribed in the instruction book; customer adjustments,
routine maintenance and cleaning; consumable items such as filters; use of non-SAMSUNG or unauthorized parts, supplies,
accessories or equipment which damage this product or result in service problems.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILI-
TY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION
WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS
OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED
DAMAGE.WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE
OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE
NEGLIGENCE OF SAMSUNG.THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATESYOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you.This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
SAMSUNG ELECTRONICS AMERICA, INC. - CONSUMER ELECTRONICS CUSTOMER SERVICE
400 Valley Road, Suite 201 Mount Arlington, NJ 07856
Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864)
|