Samsung Aw1801b User Manual

OWNER’S  
INSTRUCTIONS  
AW0801B  
AW1001B  
AW1201B  
AW1801B  
Window-type Room Air Conditioner  
(Cool)  
E
S
DB98-08496A(1)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Description of Each Component ....................................................................  
Remote Control - Buttons ..............................................................................  
Getting Started ...............................................................................................  
Inserting the Remote Control Batteries ..........................................................  
2
4
5
6
7
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................  
Ventilating Your Room ....................................................................................  
8
9
Removing Excess Humidity ............................................................................ 10  
Adjusting the Air Flow Direction Horizontally .................................................. 11  
Adjusting the Air Flow Direction Vertically ....................................................... 11  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer ...................................................................................... 12  
Setting the Off Timer ...................................................................................... 13  
Setting the Sleep Timer .................................................................................. 14  
Selecting Energy Saving mode ...................................................................... 15  
RECOMMENDATIONS FOR USE  
Temperature and Humidity Ranges ................................................................ 16  
Cleaning Your Air Conditioner ........................................................................ 17  
Solving Common Problems ............................................................................ 18  
Technical Specifications ................................................................................. 19  
E-3  
Description of Each Component  
The design and shape are subject to  
change, depending on the model.  
Inner air flow blades  
(right/left orientation)  
Air outlet  
Air outlet  
Outer air flow blades  
(up/down orientation)  
Ventilation lever  
Air inlet (Outside)  
Air inlet (Inside)  
Air filter (Inside)  
Power plug  
(The type of power plug  
may differ, depending on  
the local power supply.)  
Temperature/Timer settings  
Energy Saver indicator  
Timer indicator  
Remote control sensor  
Dry adjustment indicator  
On/Off button  
Fan speed  
adjustment button  
Mode selection button  
(Cool, Fan, Dry)  
Temperature adjustment buttons  
E-4  
Remote Control - Buttons  
Timer setting button  
Temperature adjustment  
buttons  
Sleep timer setting button  
Mode selection  
buttons  
Fan speed  
adjustment buttons  
Energy Saver button  
On/Off button  
E-5  
Getting Started  
You have just purchased a Samsung window-type room air conditioner which should be installed  
following your installation manual.  
Your Owner’s Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they will help you take full advantage of the unit’s features.  
The booklet is organized as follows.  
The following figures are shown on pages 4 and 5:  
-
-
Description of Each Component  
Remote control (buttons)  
They will help you find the buttons and understand the symbols displayed.  
In the manual, you will find a series of step-by-step procedures for each function  
available.  
The illustrations in the step-by-step procedures use four different symbols:  
NOTE  
PRESS  
PUSH  
IMPORTANT  
E-6  
Inserting the Remote Control Batteries  
You must insert or replace the remote control batteries when :  
You purchase the air conditioner  
The remote control does not work correctly  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-7  
Cooling Your Room  
You must select the Cool mode if you wish to lower the temperature  
in your room. You can also set the Fan speed.  
Remote Control  
Control Panel  
Press the  
(On/Off) button.  
1
Result: The air conditioner starts up in the mode selected when the  
unit was last used.  
The unit beeps twice.  
The air conditioner is fitted with a protection mechanism to prevent  
the unit from being damaged when it is started immediately after  
being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the temperature is not displayed on the control panel:  
Press the  
or  
button on the remote control  
Press the  
button on the unit one or more times until the  
temperature is displayed.  
Result: The unit beeps each time you press the  
The air conditioner starts up in the Cool mode.  
/
button.  
You can change modes at any time.  
3
To adjust the temperature, press the  
or  
buttons on the remote  
control or unit one or more times until the desired temperature is displayed.  
The temperature can be set between 64°F and 86°F.  
Result: Each time you press the  
or  
buttons:  
– The temperature is adjusted by 1°F and displayed on  
the control panel  
– The unit beeps  
◆◆ The air conditioner starts cooling, if the room temperature is  
higher than the selected temperature.  
◆◆ If the room temperature reaches the set temperature, the air  
conditioner stops cooling, but the fan is still operating.  
4
To set the fan speed:  
Press the  
or  
,
or  
button on the remote control as desired.  
Press the  
button on the unit one or more times until the  
desired Fan speed(F1, F2 or F3) is displayed.  
Low  
Medium  
High  
To control the direction of the air flow, refer to page 11.  
5
E-8  
Ventilating Your Room  
If the air in your room is stale, you can ventilate the room using  
the Fan feature.  
1
If you wish to discharge stale air, push the ventilation lever on the front of the  
unit to the right and open position ( ).  
Result: The air inside the room circulates and stale air is discharged  
outside.  
Otherwise, push the ventilation lever to the left and closed position (  
).  
Result: The air simply circulates inside the room.  
Remote Control  
Control Panel  
2
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps twice.  
3
If the fan speed(F1, F2 or F3) is not displayed on the control panel:  
Press the  
or  
button on the remote control  
Press the  
button on the unit one or more times until the fan speed  
(F1, F2 or F3) is displayed.  
Result: The unit beeps each time you press the  
The air conditioner starts up in Fan mode.  
/
button.  
You can change modes at any time.  
When the air conditioner is in the Fan mode, the temperature  
cannot be set or displayed.  
4
To set the fan speed:  
Press the  
or  
,
or  
button on the remote control as desired.  
Press the  
button on the unit one or more times until the  
desired fan speed(F1, F2 or F3) is displayed.  
Low  
Medium  
High  
To control the direction of the air flow, refer to page 11.  
5
E-9  
Removing Excess Humidity  
If the atmosphere in your room is very humid or damp, you can remove  
excess humidity without lowering the room temperature too much.  
You can operate the Dry mode only by using the control panel.  
Remote Control  
Control Panel  
1
If necessary, press the  
(On/Off) button.  
Result: The air conditioner starts up in the mode selected when  
the unit was last used.  
The unit beeps.  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the dry indicator is not displayed at the top of the control panel,  
press the  
appears.  
button on the control panel one or more times until it  
Result:  
The unit beeps each time you press the  
The air conditioner runs in Dry mode.  
button.  
You can change modes at any time.  
3
To adjust the temperature, press the  
or  
buttons one or  
more times until the required temperature is displayed.  
Possible temperatures are between 64°F and 86°F inclusive.  
Result: Each time you press the  
or  
buttons:  
- The temperature is adjusted by 1°F  
- The unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 11.  
E-10  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room, you can adjust  
the orientation of the inner air flow blades on the unit.  
1
Adjust the air flow blades to the desired position by pushing them side to side.  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room, you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION  
When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them upwards or  
downwards.  
1
If you orient the air flow blades downwards and the unit operates in  
Cool mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-11  
Setting the On Timer  
The On Timer enables you to switch on the air conditioner automatically after a  
given time. You can select the On timer only when the air conditioner is off. You  
can select the On timer only when the air conditioner operates in the Cool mode.  
Remote Control  
Control Panel  
1
Check that the air conditioner has been switched off; if necessary,  
press the (On/Off) button.  
2
Set the operating time by pressing the  
one or more times until the desired time is displayed. The operating time  
can be set between 1 and 24 hours.  
button on the remote control  
Result: Each time you press the  
button:  
– The time is adjusted by 1 hour and displayed on the control  
panel  
– The unit beeps  
The operating time is displayed and decreases automatically to  
indicate the remaining time.  
The air conditioner starts up in the Cool mode automatically  
when the operating time reaches zero.  
You can select the fan speed, temperature and Energy saving mode  
after setting the On timer and Off timer mode. However, when you  
change the mode, the On timer and Off timer mode is canceled.  
To Cancel the On Timer  
To cancel the timer, press:  
The  
button on the remote control one or more times until "--" is  
displayed.  
or  
The  
(On/Off) button on the remote control or unit (The air conditioner  
operates in the mode selected when the unit was last used.)  
E-12  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically after a  
given time. You can select the Off timer only when the air conditioner is on. You  
can select the Off timer only when the air conditioner operates in the Cool mode.  
Remote Control  
Control Panel  
1
Check that the air conditioner has been switched on; if necessary,  
press the (On/Off) button.  
2
Set the operating time by pressing the  
one or more times until the desired time is displayed. The operating time  
can be set between 1 and 24 hours.  
button on the remote control  
Result: Each time you press the  
button:  
– The time is adjusted by 1 hour and displayed on the control  
panel  
– The unit beeps  
The operating time is displayed and decreases automatically to  
indicate the remaining time.  
The air conditioner switches off automatically when the  
operating time reaches zero.  
You can select the fan speed, temperature and Energy saving mode  
after setting the On timer and Off timer mode. However, when you  
change the mode, the On timer and Off timer mode is canceled.  
To Cancel the Off Timer  
To cancel the timer, press:  
The  
button on the remote control one or more times until "--" is  
displayed.  
or  
The  
(On/Off) button on the remote control or unit.  
E-13  
Setting the Sleep Timer  
The Sleep Timer can be used when you are cooling your room to switch  
the air conditioner off automatically after 8 hours.  
If you wish to switch the unit off at a specific time, refer to page 13.  
Remote Control  
Control Panel  
1
Make sure that you have selected the Cool mode.  
2
Press the  
Result:  
button on the remote control  
Each time you press a button, the unit beeps.  
The “SLEEP” passes through the control panel for about  
15 seconds and the " " will be displayed.  
The remaining time is displayed and decreased by 1 hour  
automatically to indicate the remaining time.  
The air conditioner will be controlled as illustration below.  
Cooling When the temperature has  
been increased by 2°F  
(after 1 hour), it is maintained  
for 7 hours.  
To Cancel the Sleep Timer  
To cancel the timer, press:  
The  
button on the remote control.  
Result:  
The unit beeps.  
The SLEEP indicator is no longer displayed.  
The air conditioner operates in the mode selected last.  
If you select the Energy Saving mode in the Sleep Timer mode,  
the Sleep Timer will be cancelled and the air conditioner will start up  
in the Energy Saving mode.  
E-14  
Selecting Energy Saving Mode  
If you wish to save energy when using your air conditioner,  
select the energy saving mode.  
Remote Control  
Control Panel  
To select the energy saving mode, press the  
button on the remote  
1
control one or more times until the Energy Saver indicator lights up.  
Result:  
The fan and compressor cycle on and off together.  
The fan will continue to run for a short time after the  
compressor cycles off.  
If you would like the air conditioner to run in Fan mode, do not press  
the  
button. You cannot use the Fan mode in the energy saving  
mode.  
2
To stop the energy saving mode, press the  
control again.  
button on the remote  
Result: The fan runs at all times, while the compressor cycles on and off.  
If you select the Sleep Timer in the Energy Saving mode, the Energy  
Saving will be cancelled and the air conditioner will start up in the  
Sleep Timer mode.  
E-15  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges  
within which the air conditioner can be used.  
Mode  
Indoor Temperature  
Outdoor Temperature  
Indoor Humidity  
Cooling  
70°F to 90°F approx.  
70°F to 110°F approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered and the air  
conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen if the  
heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-16  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to maintain the air conditioner  
in the best condition for a long period of time.  
When cleaning the air conditioner, turn it off and pull out the  
power plug.  
1
Open the front grille by pulling the tabs on both sides of the grille.  
Then lift it up slightly to open the front grille completely.  
2
3
Grab the tabs on the filter and pull it up and out.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
4
5
When you have finished, insert the air filter back into its original position.  
Wipe the surface of the unit with a neutral detergent  
and then wipe it again with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
If you...  
Then...  
Set the fan going for a few  
hours to dry the inside of the air  
conditioner thoroughly.  
Will not be using the  
air conditioner for a  
long period of time  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
Have not used the air  
conditioner for a long  
period of time  
E-17  
Solving Common Problems  
Before contacting an authorized service center, perform the following simple checks.  
They may save you the time and expense of an unnecessary call.  
Problem  
Explanation / Solution  
Check that the circuit breaker used for the air conditioner has not been  
triggered.  
Check that the power cable is plugged into a wall socket and the socket is  
switched on, if necessary.  
The air conditioner does  
not operate at all  
Check that the temperature indicator on the unit is lit; if necessary,  
press the (On/Off) button on the remote control or unit.  
Check that there are no obstacles between you and the unit.  
Replace the remote control batteries if necessary.  
Check that you are close enough to the unit (seven metres/yards or less).  
The air conditioner does not  
operate with the remote  
control  
Check that you are pointing the remote control at the remote control sensor  
on the unit.  
Replace the remote control batteries if necessary.  
No beep is heard when you  
press the (On/Off) button  
on the remote control  
Check that the correct operating mode has been selected(Cool).  
The room temperature may be too low.  
The air conditioner does not  
cool  
Dust may be blocking the air filter; refer to page 17 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Check that the timer has been programmed correctly; refer to page 12~14.  
The timer is not correctly  
triggered  
Odors are permeating the  
room during air conditioning  
◆◆ Ventilate the room.  
E-18  
Technical Specifications  
Design and specifications are subject to change without notice.  
Model  
Power Supply  
AW0801B  
AW1001B  
AW1201B  
115V~, 60Hz  
AW1801B  
230-208V~, 60Hz  
E-19  
SAMSUNG ROOM AIR CONDITIONER  
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-  
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against  
manufacturing defects in materials and workmanship for a limited warranty period of:  
One (1) Year Parts and Labor, Five (5) Years Parts Warranty for Compressor  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. Warranty repairs must be performed by SAMSUNG's authorized service center. To receive warranty service, the original  
dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.  
SAMSUNG will repair or replace any part found to be defective at no charge, as stipulated herein, with new or reconditioned  
parts during the limited warranty period specified above. To request warranty service, the purchaser must contact SAMSUNG  
for problem determination and service procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the  
product. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement  
parts and products assume the remaining original warranty, or ninety(90) days,whichever is longer.  
In - Home Service: During the warranty labor period, in-home service will be provided subject to availability within the contigu-  
ous United States. In-home service is not available in all areas. If during in-home service repair can not be completed, it may be  
necessary to remove, repair and return the product. If in-home service is unavailable, SAMSUNG may elect, at our option, to  
provide for transportation of our choice to and from a SAMSUNG authorized service center. Otherwise, transportation to and  
from the SAMSUNG authorized service center is the responsibility of the purchaser.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of  
this product and shall not apply to the following, including, but not limited to: delivery and installation; damage which occurs in  
shipment; applications and uses for which this product was not intended; failures or problems which are caused by products or  
equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, lightning or other acts of  
nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or faulty installation; product alter-  
ation or modification; improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers;  
failure to follow operating and environmental instructions that are covered and prescribed in the instruction book; customer  
adjustments, routine maintenance and cleaning; consumable items such as filters; use of non-SAMSUNG or unauthorized parts,  
supplies, accessories or equipment which damage this product or result in service problems.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-  
RANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERI-  
ODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR  
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE  
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY  
OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE  
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST  
SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND  
CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND  
LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND  
THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG  
NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO  
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR  
EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG at:  
SAMSUNG ELECTRONICS AMERICA, INC. - CONSUMER ELECTRONICS CUSTOMER SERVICE  
400 Valley Road, Suite 201 Mount Arlington, NJ 07856  
Tel: 973-601-6000, Fax: 973-601-6001  
1-800-SAMSUNG (1-800-726-7864)  

Samsung Sf 560 User Manual
Samsung Commercial Splittype Series Ns070nhxea User Manual
Sanyo Ecoi Spw Cr605gxh56b User Manual
Sanyo Khs3672r User Manual
Sharp Mx C311 User Manual
Sigma Ks 1018 User Manual
Tekkeon Healthy White Hx6730 User Manual
Trion Air Boss Dc 24 User Manual
Xerox All In One Printer C123 User Manual
Xerox Faxcentre 2121 User Manual