USER’S MANUAL
AQV09J Series
AQV12J Series
AQV18J Series
AQV24J Series
Split-type Air Conditioner
(Cooling and Heating)
DB98-27555A(1)
E S F
Contents
PREPARATION
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Name of Each Part. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control-Buttons and Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
OPERATION
Selecting the Auto Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Selecting the Cool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the Heat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the Dry Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the Fan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the Turbo Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting the Energy Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the Airflow Direction Vertically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the Airflow Direction Horizontally . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the 1 Hour Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting the On Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting Good Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
RECOMMENDATIONS FOR USE
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operating Your Air Conditioner Without the Remote Control . . . . . . . . . . 23
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cleaning Deodorizing and Bio Filter (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . 25....
TECHNICAL SPECIFICATIONS
E-3
Name of Each Part
The design and shape can be changed according to the model.
Indoor Unit
Air Inlet
Temperature sensor
Air filter
(under the grille)
Air flow blades
(outlet)
Operation indicator (GREEN)
Timer indicator (GREEN)
Turbo indicator (RED)
On/Off button
E-4
AQV09JSeries
Outdoor Unit
AQV12JSeries
Air Inlet (Rear)
Air Outlet
Connection Valve
(Inside)
AQV18JSeries
Outdoor Unit
AQV24JSeries
Air Inlet (Rear)
Air Outlet
Connection Valve
(Inside)
E-5
Remote Control-Buttons and Display
Transmission indicator
Temperature and Timer setting
Battery life indicator
1 Hour Timer indicator
On Timer indicator
Off Timer indicator
Operation modes indicator
(
AUTO,
COOL, DRY,
FAN,
HEAT)
Turbo function indicator
Sleep mode indicator
Airflow direction
Energy saving indicator
Fan speed & Silence indicator
Turbo button
Power(On/Off) button
1 Hour Timer button
Mode selection button
(AUTO, COOL, DRY, FAN, HEAT)
Temperature adjustment button
Energy Saving button
Fan speed adjustment
button & Silence mode button
Airflow control button
Timer Set/Cancel button
Battery check button
Good Sleep button
On Timer button
Off Timer button
Note
E ach mode indicator shows the current setting and the battery life.
Y ou can check the battery life by pressing the
button.
T
he number of the battery life indicator means the remaining battery life.
Replace the batteries when only one battery life indicator remains.
E-6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
You purchase the air conditioner
The remote control does not work correctly
Note
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1
Remove the battery cover in the rear of the remote control by pushing
it with your thumb.
2
3
Insert two batteries, respecting the polarities as indicated by
the + and - symbols.
Close the cover by sliding it back in its place.
E-7
Getting Start
The User’s Manual provides you valuable information about your air conditioner.
Please read this manual carefully before using the air conditioner.
It will help you take full advantage of the unit's features.
You have already seen the basic description of the unit on pages from 4 to 6.
Starting up with the next page, you will find a series of step-by-step procedures
for each function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E-8
Selecting the Auto Mode
You can select the Auto mode if you want to cool or heat your room automati-
cally. You can adjust the temperature and the fan speed in
this mode.
1
2
3
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Press the
Result:
button on the remote control until
is displayed.
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Auto mode.
The Auto mode cools or heats the room depending on
the set temperature.
The air conditioner changes the Cool or Heat mode automatically
depending on the current temperature during operation.
Note
You can change modes at any time.
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
E-9
Selecting the Cool Mode
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
Result:
button on the remote control until
is displayed.
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan operates consistently.
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Silence mode
)
Low
Medium
High
Maximum
Result:
Each time you press the
beeps.
button, the indoor unit
Note
Silence mode( ) makes the noise quieter during
operating the indoor unit in the Cool mode.
5
To control the airflow direction, refer to page 16.
E-10
Selecting the Heat Mode
You can select the Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1
2
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Press the
Result:
button on the remote control until
is displayed.
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Heat mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
- The temperature is adjusted by 1°F
- The indoor unit beeps
If the room temperature reaches 9°F higher than the set tempera-
ture, the air conditioner stops heating, but the fan operates consis-
tently.
If the room temperature reaches 5°F lower than the set
temperature, the air conditioner starts heating again.
button:
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Silence mode
)
Low
Medium
High
Maximum
Result:
Each time you press the
button, the indoor unit beeps.
For the first 3~5 minutes, the fan may not operate to prevent
the cool air from running out of the indoor unit.
It helps to warm the air in your room sufficiently.
Note
Silence mode( ) makes the noise quieter during
operating the indoor unit in the Heat mode.
5
To control the airflow direction, refer to page 16.
E-11
Selecting the Dry Mode
You can select the Dry mode if you want to dehumidify your room.
You can adjust the temperature in this mode.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
Result:
button on the remote control until
is displayed.
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Dry mode.
Note
You can change modes at any time.
Press the
button to adjust the temperature until the required
3
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
The air conditioner starts dehumidifying and the fan speed is
adjusted automatically.
4
To control the airflow direction, refer to page 16.
E-12
Selecting the Fan Mode
You can select the Fan mode if you want to ventilate your room.
It helps to refresh the air in your room. You can adjust the fan speed in this
mode.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
Result:
button on the remote control until
is displayed.
button.
The indoor unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
Note
You can change modes at any time.
Press the
button to select the fan speed until the required setting is
3
displayed.
Low
Medium
High
Result:
Each time you press the
beeps.
button, the indoor unit
4
To control the airflow direction, refer to page 16.
E-13
Selecting the Turbo Function
You can select the Turbo Function if you want to cool or heat your room in the
fastest way. After the 30 - minute operation with the
maximum setting, it returns to the previous setting.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
Result:
button.
The temperature and fan settings are adjusted automatically.
The air conditioner cools or heats the room as quickly as possible.
After 30 minutes, the air conditioner is reset automatically to the
previous setting.
You can select the Turbo function in the Auto, Cool and Heat mode.
If you select this function in the Dry or Fan mode, the mode changes to
the Auto mode.
3
4
Press the
button again to stop the Turbo Function before the end of the
30-minute period.
Result:
The air conditioner is reset automatically to the previous setting.
To control the airflow direction, refer to page 16.
E-14
Selecting the Energy Saving Function
You can select the Energy Saving Function to save energy when
cooling or heating.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
Result:
button.
The indoor unit beeps.
The air conditioner runs in the Energy saving mode.
The outer airflow blade moves up and down.
To stop the Energy saving mode, press the
again.
Note
You can select the Energy saving mode only in the Cool
and Heat mode.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
Press the
button to select the fan speed until the required
4
5
setting is displayed.
To control the airflow direction, refer to page 16.
E-15
Adjusting the Airflow Direction Vertically
You can adjust the airflow direction vertically. The outer airflow
blade moves up and down to increase the efficiency of the cooling
or heating operation.
1
Press the
Result:
button until the required direction is set.
The outer blade is adjusted vertically.
2
3
Press the
operation.
button to move the blade up and down automatically during
button again to stop the blade moving up and down.
Press the
Note
If you turn the air conditioner...
Then the blade...
off
is closed completely.
on
set to the default position.
Adjusting the Airflow Direction Horizontally
You can adjust the airflow direction horizontally with your hands. The inner
blades with small fins moves the air to the required
direction.
1
Adjust the inner blades by moving them to left or right.
E-16
Setting the 1 Hour Timer
You can set the 1 Hour Timer to turn off the air conditioner automatically after
an hour. It is the quick and convenient way using only one button.
1
Press the
Result:
button until the
indicator appears on the remote control.
The operation indicator on the indoor unit lights up.
The air conditioner turns off after an hour automatically.
2
Press the
button until the desired mode is displayed at the remote control
to select the mode after setting the 1 Hour Timer.
Result: The air conditioner operates in the selected mode for an hour.
Note
If you set the 1 Hour Timer when the air conditioner is turned off, the air
conditioner turns on and operates for an hour.
To cancel the 1 Hour Timer
Press the
Result:
button to cancel the 1 Hour Timer.
The indoor unit beeps.
The
indicator is no longer displayed.
The air conditioner operates normally.
E-17
Setting the On Timer
You can set the On Timer to turn on the air conditioner automatically
at the appointed time. You can set the time from 1 hour to 24 hours.
Press the
button until the required time is displayed to set the On Timer. You
1
can set the time between 1 hour and 24 hours.
2
Press the
Result:
button to complete the setting.
The remaining time is displayed.
The timer indicator stops blinking.
The selected mode and the temperature on the display disappear
after 10 seconds.
The air conditioner turns on automatically at the appointed time
and the On Timer setting disappears.
3
Press the
button until the desired mode is displayed at the top of the
remote control to select the mode in advance.
Result: The air conditioner operates in the selected mode when it is turned
on.
Note
If you don’t use the remote control after setting the On Timer,
it turns off automatically after 25 hours.
To Cancel the On Timer
Press the
button to cancel the On Timer.
Note
If you press the
canceled.
button, both the On Timer and the Off Timer are
E-18
Setting the Off Timer
You can set the Off Timer to turn off the air conditioner automatically
at the appointed time. You can set the time from 1 hour to 24 hours.
Press the
button until the required time is displayed to set the Off Timer. You
1
can set the time between 1 hour and 24 hours.
2
Press the
Result:
button to complete the setting.
The remaining time is displayed.
The timer indicator stops blinking.
The air conditioner turns off automatically at the appointed time
and the Off Timer setting disappears.
Example
If you would like to turn the air conditioner on after 2 hours and to
operate it for 2 hours:
1. Press the
button until‘2 Hr’is displayed.
2. Press the
button.
3. Press the
4. Press the
button until‘4 Hr’is displayed.
button.
Note
You can check or change the mode and/or the temperature by
pressing the
Off Timer.
button or the
button after setting the
To Cancel the Off Timer
Press the
button to cancel the Off Timer.
Note
If you press the
canceled.
button, both the On Timer and the Off Timer are
E-19
Selecting Good Sleep Mode
Good Sleep mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The Good Sleep mode can
be selected only when the air conditioner is switched on in cool/heat mode.
1
2
3
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
Press the
Result:
button to select
or
mode.
The indoor unit beeps each time you press the
button.
The air conditioner runs in cool or heat mode.
Press the
button until the
indicator appears on the remote control.
- In the case of adjusting time
Press the button to adjust desired operation time from 1 to 12 hours.
Good Sleep mode will automatically stop after the set time.
Press the
button.
Result:
In the case of adjusting the extra time for Good Sleep mode,you
should press the
button within 10 seconds.If you do not press
the button within 10 seconds.Good Sleep mode will
automatically stop in 8-hour operation.
4
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
button:
- The temperature is adjusted by 1°F
- The indoor unit beeps
E-20
In cool mode
Good Sleep mode keeps the skin temperature at the best during the 3 stages
such as, Falling Asleep Stage Sound Sleep Stage Wake Up Stage in order.
Falling Asleep Stage :
This stage supports the environment to quickly cool down. Together with
comfortable intermittent air, you will be able to fall asleep quickly.
S ound Sleep Stage :
This stage helps users to take deep sleep and keep the healthy skin by
controlling wavy temperature control and insensible air stream.
W ake Up Stage :
This stage supports comfortable intermittent air to the room to raise human
body temperature for refreshing wake up.
Temp.
��������
��������
Set temperature
When the set time is over 8 hours,
this section will be repeated.
����������
����������
Time(hr.)
The recommended temperature is set between 77°F(25°C) and 81°F(27°C), and
79°F(26°C) is the most ideal temperature for comfortable sleep.
Airflow blades and fan speed are controlled automatically as the above 3 stages
in Good Sleep mode.
Set Off timer in Good Sleep mode over 5 hours. You feel disturbed sleep
if the Good Sleep is set too short or long because the basic off timer is set for 8
hours.
If the Good Sleep mode is set less than 4 hours, the operation will be stopped
after the set time. If the Good Sleep mode is set over 5 hours, it will run as Wake
Up stage for the last one hour before stop.
In heat mode
The temperature decreases by 2°F(1°C) every hour. After a decrease of 4°F(2°C),
the temperature is maintained.
You can set the airflow blades and fan speed separately during Good Sleep
mode.
-2˚F(-1˚C)
-4˚F(-2˚C)
E-21
Operating Recommendations
Here are a few recommendations that you should follow when using your air conditioner.
Topic
Recommendation
Heating performances The heat pump function of the air conditioner absorbs heat from outside air and brings it
indoors. As the temperature of the outside air drops, the heating performance of air
conditioner will decrease. If you find that the room is not warm enough, using an additional
heating appliance is recommended.
Warm air circulation
The air conditioner circulates warm air to heat your room. It will take some time to warm the
air in your room entirely after the air conditioner turns on. Therefore, turn the air conditioner on
in advance.
Frost
When outdoor temperature is low but humidity is high, frost may form on the outdoor unit at
Heat mode.
The heating operation stops.
The defrost mode will be triggered automatically for 3 to 14 minutes.
No intervention is required ; after about 7 minutes, the air conditioner operates again normally.
High indoor and
If both indoor and outdoor temperatures are high and the air conditioner is running at HEAT
outdoor temperatures mode, the outdoor unit’s fan and compressor may stop at times. This is normal;simply wait until
the air conditioner switches on again.
Power failure
If a power failure occurs while the air conditioner is operating, the unit will be switched off.
When the power returns, the air conditioner starts up again automatically.
Protection mechanism When the air conditioner is started immediately after being plugged in or stopped, the normal
operation starts up after 3 minutes for the reason of protection.
Cooling operation
Silence Mode
The indoor unit may not get the selected fan speed such as Medium and Low under cooling
operation at very low outdoor temperatures for the protection of the indoor unit from ice
or frost.
During Low fan speed operation, cooling performance will be reduced. If the room does not be
cooled down when using Low fan speed operation, please adjust the indoor unit’s fan speed.
When you operate Silence Mode in cooling and heating, fan speed will decrease to make noise
quieter.
As a result, the performance of the unit may be reduced.
E-22
Temperature and Humidity Ranges
If you check the following tables, you can use your air conditioner more efficiently.
If the air conditioner is used at... Then...
Heating capacity
Low temperatures
The air conditioner may stop operating for the reason of protection.
Water may leak and some malfunction may occur if the heat exchanger freezes.
Water may condense and drip from the surface of the indoor unit if you don’t use
the air conditioner for an extended period of time.
Protection mechanism
Operation
Outdoor Temperature
Indoor Temperature
Indoor Humidity
5°F to 75°F approx.
80°F or less
27°C or less
61°F to 90°F approx.
16°C to 32°C approx.
61°F to 90°F approx.
16°C to 32°C approx.
Heating
-
-15°C to 24°C approx.
14°F to 109°F approx.
-10°C to 43°C approx.
14°F to 109°F approx.
-10°C to 43°C approx.
Cooling
80% or less
-
Dehumidifying
If the outdoor temperature is as low as 32°F/0°C, the heating capacity drops up to 70~80% depending on
the operating condition.
If you use the air conditioner in temperatures over 90°F/32°C (indoor temperature), the cooling capacity may drop.
Operating Your Air Conditioner Without the Remote Control
You can operate your air conditioner directly without the remote
control.
1
To turn the air conditioner on, press the On/Off button on the right side of
the indoor unit.
Result:
The Operation indicator on the indoor unit lights up.
The indoor unit beeps.
The air conditioner starts up in the appropriate mode for
the room temperature. The air conditioner changes the Cool or
Heat mode automatically depending on the current
temperature during operation.
2
To turn the air conditioner off, press the On/Off button again.
Note
Even if you turned the air conditioner on with the On/Off button,
you can control it with the remote control.
E-23
Troubleshooting Guide
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all.
Check if power is on and operate the air conditioner again.
Check if the circuit breaker is switched off.
Check if Off Timer is set.
The temperature is not adjusted.
Check if you selected the Fan mode.
The air conditioner does not operate
in the HEAT mode.
Check if the air conditioner is cooling only model.
Check if the remote control is for cooling only model.
The cool(warm) air does not come
out from the air conditioner.
Check if set temperature higher(lower) than current temperature.
Check if you selected the Fan mode. Select the Cool, Heat, Auto or Dry
mode.
Check if the air filter is blocked by dirt. Clean the air filter regularly.
Check if the there is cover on the outdoor unit or any obstacle.
Remove the cover or obstacle.
Check if you installed the air conditioner under direct sunlight.
The window or door may be opened.
Check if you turn on the air conditioner just now.
It takes about 3 minutes to cool or heat the room.
Check if the drain pipe is too long.
The fan speed is not adjusted.
In Dry mode, the fan speed is selected automatically.
The remote control does
not operate.
Check if the battery is discharged. Replace the battery.
Check if the remote control sensor is blocked.
Check if the air conditioner is placed near strong light.
The Timer is not set.
Check if you pressed the
button after selecting time.
Odor is permeated in the
room during operation.
Check if you use the air conditioner in smoky area or there is a smell.
Ventilate the room or select the Fan mode for 1~2 hours.
The indoor unit indicator
flashes.
Press the
button to turn on the air conditioner again.
Switch the circuit breaker off and switch on it again.
Strange sound is heard from
the air conditioner.
The sound is heard when the refrigerant gas flow is changed depending
on the use of the air conditioner.
When you press the
button, noise may be heard that the
air conditioner sense the airflow blade.
Water drops from the outdoor
unit connection part.
Water may form due to the difference of the temperature.
E-24
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must
clean it regularly to remove the dust that accumulates on the air filter.
Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.
IMPORTANT
Open the upper front grille by pulling the lower right and left tabs
of the grille.
1
2
3
4
5
Pull air filters out of each tab of the grille.
Remove all dust on the air filters with a vacuum cleaner or brush.
When you finished, insert air filters by fixing it to each tab of the grille.
Front grille
Air filter
To close the front grille, fix it to hooks and push down the lower
right and left tabs of the grille.
Body groove
Body
Clean the front grille with a damp cloth and mild detergent
(do NOT use benzene, solvents or other chemicals).
6
Front grille
Hook
Note
If you have not used the air conditioner for a long period of time,
set the fan going for three to four hours to dry the inside of
the air conditioner thoroughly.
Body
Cleaning Deodorizing and Bio filter (Option)
To remove minute dust particles and odors, deodorizing and Bio filter
are installed in the air conditioner. You should clean the filters every
3 months.
Deodorizing Filter
Open the upper front grille by pulling the lower right and left tabs of
the grille.
1
2
3
4
Pull out the deodorizing and Bio filter.
Wash the filters with clean water, then dry them in the shade.
Bio Filter
Insert the filters into the original position.
Note You can change the position of filters with each other.
Close the front grille.
5
E-25
If you have any comments or questions regarding Samsung products,
contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
|