Customer Service
If you have a question about your air purifier, call our toll-free customer
service number. Before calling, please note the model, type and serial
number and fill in that information below. These numbers can be found on the
back of the air purifier. This information will help us answer your question
more quickly.
QUANTUM PURE AIRE
PRODUCTS, LLC
INNOVATORS OF AIR TREATMENT SYSTEMS
MODEL:__________ SERIAL:______________
ONE-YEAR LIMITED WARRANTY
Quantum Pure Aire Corporation warrants this air purifier to be free of defects in
material and workmanship for a period of one year from the date of original purchase.
If the unit is damaged in shipping or fails in operation, notify us immediately.
Call 1-800-966-5575 the Customer Service Department.
Light Commercial Series
LCS & LC Units
If your unit is within the warranty period, it will be repaired at no cost to you.
Only Quantum Pure Aire Customer Service can issue a Return Authorization Number
(RA#) for repair. NO returns will be accepted without a RA#. After obtaining a RA#,
forward the unit and the AC adapter prepaid to the address below. It is recommended
that the RA# be prominently placed on the outside of the shipping carton. Failure to
follow these steps may lead to unnecessary delay and expense in processing your request.
If the unit is beyond the warranty period, we will repair, retrofit or otherwise return the
unit to an operational state. You will be given the cost of the repairs prior to your
returning it to us. ALL REPAIRS MUST BE PREPAID.
All warranty benefits are void if the unit is, (a) operated contrary to the operating
manual; (b) serviced by an unauthorized agent; or (c) misused or abused.
This warranty is NOT TRANSFERABLE unless authorized by the factory.
No agent or reseller is authorized to warranty or repair this product.
NO OTHER WARRANTY OTHER THAN THIS WARRANTY IS VALID.
QUANTUM PURE AIRE PRODUCTS, LLC
333 Strawberry Field Road, Ste 5
Warwick, RI 02886-6772 USA
Toll Free: 800-966-557 • Tel: 401-732-6770 • Fax: 401-732-6772
OWNER'S MANUAL
THIS MANUAL SUPERSEDES ALL PREVIOUS PUBLICATIONS
An Ozone AirTreatment System
Helpful Tips
Ozone is a very powerful oxidant that is produced naturally.
It is created in the stratosphere by ultraviolet rays from the
sun, reacting with oxygen (The Ozone Layer). The resultant
photochemical process forms ozone. Ozone protects us
from exposure to the harmful UV rays of the sun.
DO NOT- operate the unit for days without monitoring its
operation. This is true of any electronic device.
DO NOT- open windows while operating the unit, this will
diminish the effectiveness of the process.
DO NOT- operate the unit when there is a strong OZONE
smell. This smell verifies that the purification
process is complete. Turn the unit setting down
or turn the unit OFF.
DO NOT- operate the unit beyond the recommended
maximum size area.
When it rains, upper level ozone is combined with raindrops
and falls to earth. During a severe storm, ozone is generated
as the bolt of lightening passes through the air; the electrical
reaction "excites" the oxygen molecules and creates ozone.
Ozone is also generated on earth in greater than normal
amounts in highly polluted areas. Nature uses the
photochemical process again to react to smog at the earth's
surface. As pollution increases, the density of air increases.
UV rays passing through the denser air are catalysts for a
photochemical reaction that results in an increase in the
concentration of ozone. As the ozone overcomes or oxidizes
the pollutants, the air becomes less dense. Thus the
self-balancing act of nature provides a natural purification of
the air. The normal concentration of ozone in clean air
is .03-. 05 PPM.
DO NOT- open or tamper with the unit or the warranty WILL
become void.
DO NOT- operate the unit near water. It is an electrical
device and care should be taken to avoid the
possibility of electrical shock.
DO NOT- assume the unit is malfunctioning if the pollutant
level or odor does not disappear IMMEDIATELY.
Temperature, humidity and time, as well as the
amount of pollutants can hinder the performance
of ozone. Running the unit for a longer period of
time to control the problem may be required.
DO NOT- assume the unit is malfunctioning if the unit does
not turn ON or does not respond to every odor
when operating in the automatic mode. Not all
VOC's or contaminants are of sufficient strength
to trigger the unit on. This unit can also be
turned ON in Manual mode to control unwanted
odors.
The QUANTUM PURE AIRE CORP. AIR TREATMENT SYSTEM
is designed to create the above-mentioned level of ozone in
your indoor environment. By doing so, ozone will be
introduced into your home or office and will clean your
domestic air as it does the outside air...NATURALLY!
DO NOT- expect the unit to solve your problem INSTANTLY!
In some extreme cases, the area being treated
may require additional cleaning methods as well
as operating the unit.
Page -6-
Page -3-
c o n t r o l p a n e l f o r l i g h t c o m m e r c i a l w i t h o u t s e n s o r
c o n t r o l p a n e l f o r l i g h t c o m m e r c i a l w i t h s e n s o r
Light Commercial
Light Commercial
air treatment system
air treatment system
with puri-
Contaminant Status
Contaminant Level
03 Active
Low
Contaminant Neutralize
High
Medium
POWER ON
5
Contaminant Present
03 Active
ON
ON
1
10
OFF
OFF
MANUAL AUTO
UNDERSTANDING HOW YOUR UNIT WORKS
UNDERSTANDING HOW YOUR UNIT WORKS
1. Contaminant Neutralized: This Green Light indicates that the
contaminants are neutralized and the sensor is in standby mode.
In this mode, the fan will run continuously and the unit will monitor the
levels of impurities in the air. When the air contains very little or no
contaminant the light remains on. NOTE: when the unit is first turned on,
this light will blink on and off for about 3 minutes as the unit warms up.
It will remain ON when the unit is ready to operate.
2. Contaminant Present: This Red Light indicates the presence of sufficient
impurities in the air to signal the system to begin the cleaning process.
3. O3 Active: This Green Light will turn ON whenever ozone is generated.
4. Contaminant Levels: These Yellow Lights indicate the levels of impurities
as HIGH, MEDIUM & LOW. When the purification process is complete,
all Yellow Lights will turn off.
1. On / Off knob: Turning the knob clockwise to the ON position will turn
the machine on. Turning this knob clockwise will also control the fan speed.
A higher speed will produce more Ozone.
2. O3 Active: This green light will turn ON to indicate that Ozone is
generated.
3. Power On: This Red light will remain on when the machine is operating
Ozone
HOW TO OPERATE
1. Place your air purifier at counter height or higher. This placement will give
you the best possible results. This is an electrical device. To reduce the risk
of electric shock, never plug the air purifier into an outlet while your hands
are wet. Never expose to rain or place the unit in standing water.
2. Plug the AC power cord to an 110Vac or 240Vac outlet.
3. Place unit at least 3" to 6" from a wall or bulkhead, this allows for proper
ventilation.
5. ON/OFF Control Knob: This Knob must be in the ON position to operate
the unit in either mode.
6. Auto/Manual Control Knob: You have a choice of one of two modes.
Auto Mode: In this mode, the unit will operate under the control of the
puri-stat. The air quality will be monitored and treated by the unit
automatically.
Manual Mode: In this mode, the unit will by-pass the sensor
4. Chose Auto or Manual Mode
5. Turn the unit ON by turning the ON/OFF Control Knob to the ON position.
NOTE: If Manual mode is selected, then fan speed control will be available.
circuit and allows the user to operate the unit manually. By turning this
knob clockwise, the fan speed is decreased.
NOTE: On this mode the unit will generate ozone continuously.
Page -4-
Page -5-
|